Alex Bennée [Wed, 7 Oct 2020 16:00:38 +0000 (17:00 +0100)]
tests/acceptance: disable machine_rx_gdbsim on GitLab
While I can get the ssh test to fail on my test setup this seems a lot
more stable except when on GitLab. Hopefully we can re-enable both
once the serial timing patches have been added.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20201007160038.26953-23-alex.bennee@linaro.org>
Paolo Bonzini [Wed, 7 Oct 2020 16:00:37 +0000 (17:00 +0100)]
cirrus: use V=1 when running tests on FreeBSD and macOS
Using "V=1" makes it easier to identify hanging tests, especially
since they are run with -j1. It is already used on Windows builds,
do the same for FreeBSD and macOS.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Ed Maste <emaste@FreeBSD.org>
Message-Id: <20201007140103.711142-1-pbonzini@redhat.com>
Message-Id: <20201007160038.26953-22-alex.bennee@linaro.org>
Philippe Mathieu-Daudé [Wed, 7 Oct 2020 16:00:34 +0000 (17:00 +0100)]
.mailmap: Fix more contributor entries
These authors have some incorrect author email field.
For each of them, there is one commit with the replaced
entry.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Stefan Berger <stefanb@linux.ibm.com> Acked-by: Erik Smit <erik.lucas.smit@gmail.com>
Message-Id: <20201006160653.2391972-13-f4bug@amsat.org>
Message-Id: <20201007160038.26953-19-alex.bennee@linaro.org>
Philippe Mathieu-Daudé [Wed, 7 Oct 2020 16:00:23 +0000 (17:00 +0100)]
contrib/gitdm: Add more academic domains
There is a number of contributions from these academic domains.
Add the entries to the gitdm 'academic' domain map.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Dayeol Lee <dayeol@berkeley.edu> Acked-by: Fan Yang <Fan_Yang@sjtu.edu.cn> Acked-by: Xinyu Li <precinct@mail.ustc.edu.cn> Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20201006160653.2391972-2-f4bug@amsat.org>
Message-Id: <20201007160038.26953-8-alex.bennee@linaro.org>
Yonggang Luo [Wed, 7 Oct 2020 16:00:20 +0000 (17:00 +0100)]
cirrus: Fixing and speedup the msys2/mingw CI
Use cache of cirrus caching msys2
The install of msys2 are refer to https://github.com/msys2/setup-msys2
The first time install msys2 would be time consuming, so increase timeout_in to 90m
according to https://cirrus-ci.org/faq/#instance-timed-out
Apply patch of https://lists.gnu.org/archive/html/qemu-devel/2020-10/msg00072.html
[AJB: renamed printenv_script to setup_script]
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201007145300.1197-2-luoyonggang@gmail.com>
Message-Id: <20201007160038.26953-5-alex.bennee@linaro.org>
Alex Bennée [Wed, 7 Oct 2020 16:00:19 +0000 (17:00 +0100)]
hw/ide: restore replay support of IDE
A recent change to weak reset handling broke replay due to the use of
aio_bh_schedule_oneshot instead of the replay aware
replay_bh_schedule_oneshot_event.
Fixes: 55adb3c456 ("ide: cancel pending callbacks on SRST") Suggested-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: John Snow <jsnow@redhat.com> Acked-by: John Snow <jsnow@redhat.com>
Message-Id: <20201007160038.26953-4-alex.bennee@linaro.org>
Philippe Mathieu-Daudé [Wed, 7 Oct 2020 16:00:18 +0000 (17:00 +0100)]
hw/misc/mips_cpc: Start vCPU when powered on
In commit 102ca9667d we set "start-powered-off" on all vCPUs
included in the CPS (Coherent Processing System) but forgot to
start the vCPUS on when they are powered on in the CPC (Cluster
Power Controller).
This fixes the following tests:
$ avocado run tests/acceptance/machine_mips_malta.py
(1/3) test_mips_malta_i6400_framebuffer_logo_1core: PASS (3.67 s)
(2/3) test_mips_malta_i6400_framebuffer_logo_7cores: INTERRUPTED: Test interrupted by SIGTERM (30.22 s)
(3/3) test_mips_malta_i6400_framebuffer_logo_8cores: INTERRUPTED: Test interrupted by SIGTERM (30.25 s)
RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 2 | CANCEL 0
Fixes: 102ca9667d ("mips/cps: Use start-powered-off CPUState property") Reported-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201007113942.2523866-1-f4bug@amsat.org>
Message-Id: <20201007160038.26953-3-alex.bennee@linaro.org>
Paolo Bonzini [Wed, 7 Oct 2020 16:00:17 +0000 (17:00 +0100)]
configure: fix performance regression due to PIC objects
Because most files in QEMU are grouped into static libraries, Meson conservatively
compiles them with -fPIC. This is overkill and produces slowdowns up to 20% on
some TCG tests.
As a stopgap measure, use the b_staticpic option to limit the slowdown to
--enable-pie. https://github.com/mesonbuild/meson/pull/7760 will allow
us to use b_staticpic=false and let Meson do the right thing.
Reported-by: Ahmed Karaman <ahmedkrmn@outlook.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200924092314.1722645-57-pbonzini@redhat.com>
Message-Id: <20201007160038.26953-2-alex.bennee@linaro.org>
* remotes/dgibson/tags/ppc-for-5.2-20201009:
specs/ppc-spapr-numa: update with new NUMA support
spapr_numa: consider user input when defining associativity
spapr_numa: change reference-points and maxdomain settings
spapr_numa: forbid asymmetrical NUMA setups
spapr: add spapr_machine_using_legacy_numa() helper
ppc/pnv: Increase max firmware size
spapr: Add a return value to spapr_check_pagesize()
spapr: Add a return value to spapr_nvdimm_validate()
spapr: Simplify error handling in spapr_cpu_core_realize()
spapr: Add a return value to spapr_set_vcpu_id()
spapr: Simplify error handling in prop_get_fdt()
spapr: Add a return value to spapr_drc_attach()
spapr: Simplify error handling in spapr_vio_busdev_realize()
spapr: Simplify error handling in do_client_architecture_support()
spapr: Get rid of cas_check_pvr() error reporting
spapr: Simplify error handling in callers of ppc_set_compat()
ppc: Fix return value in cpu_post_load() error path
ppc: Add a return value to ppc_set_compat() and ppc_set_compat_all()
spapr: Fix error leak in spapr_realize_vcpu()
spapr: Handle HPT allocation failure in nested guest
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 9 Oct 2020 12:20:46 +0000 (13:20 +0100)]
Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2020-10-09' into staging
Monitor patches for 2020-10-09
# gpg: Signature made Fri 09 Oct 2020 06:16:51 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-monitor-2020-10-09:
block: Convert 'block_resize' to coroutine
block: Add bdrv_lock()/unlock()
block: Add bdrv_co_enter()/leave()
util/async: Add aio_co_reschedule_self()
hmp: Add support for coroutine command handlers
qmp: Move dispatcher to a coroutine
qapi: Add a 'coroutine' flag for commands
monitor: Make current monitor a per-coroutine property
qmp: Call monitor_set_cur() only in qmp_dispatch()
qmp: Assert that no other monitor is active
hmp: Update current monitor only in handle_hmp_command()
monitor: Use getter/setter functions for cur_mon
monitor: Add Monitor parameter to monitor_get_cpu_index()
monitor: Add Monitor parameter to monitor_set_cpu()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Eric Auger <eric.auger@redhat.com> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200722084048.1726105-5-armbru@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com>
Kevin Wolf [Mon, 5 Oct 2020 15:58:55 +0000 (17:58 +0200)]
block: Convert 'block_resize' to coroutine
block_resize performs some I/O that could potentially take quite some
time, so use it as an example for the new 'coroutine': true annotation
in the QAPI schema.
bdrv_truncate() requires that we're already in the right AioContext for
the BlockDriverState if called in coroutine context. So instead of just
taking the AioContext lock, move the QMP handler coroutine to the
context.
Call blk_unref() only after switching back because blk_unref() may only
be called in the main thread.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-15-kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Mon, 5 Oct 2020 15:58:54 +0000 (17:58 +0200)]
block: Add bdrv_lock()/unlock()
Inside of coroutine context, we can't directly use aio_context_acquire()
for the AioContext of a block node because we already own the lock of
the current AioContext and we need to avoid double locking to prevent
deadlocks.
This provides helper functions to lock the AioContext of a node only if
it's not the same as the current AioContext.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-14-kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Mon, 5 Oct 2020 15:58:53 +0000 (17:58 +0200)]
block: Add bdrv_co_enter()/leave()
Add a pair of functions to temporarily move the current coroutine to the
AioContext of a given BlockDriverState.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-13-kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Mon, 5 Oct 2020 15:58:52 +0000 (17:58 +0200)]
util/async: Add aio_co_reschedule_self()
Add a function that can be used to move the currently running coroutine
to a different AioContext (and therefore potentially a different
thread).
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201005155855.256490-12-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Mon, 5 Oct 2020 15:58:51 +0000 (17:58 +0200)]
hmp: Add support for coroutine command handlers
Often, QMP command handlers are not only called to handle QMP commands,
but also from a corresponding HMP command handler. In order to give them
a consistent environment, optionally run HMP command handlers in a
coroutine, too.
The implementation is a lot simpler than in QMP because for HMP, we
still block the VM while the coroutine is running.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20201005155855.256490-11-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Mon, 5 Oct 2020 15:58:50 +0000 (17:58 +0200)]
qmp: Move dispatcher to a coroutine
This moves the QMP dispatcher to a coroutine and runs all QMP command
handlers that declare 'coroutine': true in coroutine context so they
can avoid blocking the main loop while doing I/O or waiting for other
events.
For commands that are not declared safe to run in a coroutine, the
dispatcher drops out of coroutine context by calling the QMP command
handler from a bottom half.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201005155855.256490-10-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Mon, 5 Oct 2020 15:58:49 +0000 (17:58 +0200)]
qapi: Add a 'coroutine' flag for commands
This patch adds a new 'coroutine' flag to QMP command definitions that
tells the QMP dispatcher that the command handler is safe to be run in a
coroutine.
The documentation of the new flag pretends that this flag is already
used as intended, which it isn't yet after this patch. We'll implement
this in another patch in this series.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-9-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Mon, 5 Oct 2020 15:58:48 +0000 (17:58 +0200)]
monitor: Make current monitor a per-coroutine property
This way, a monitor command handler will still be able to access the
current monitor, but when it yields, all other code code will correctly
get NULL from monitor_cur().
This uses a hash table to map the coroutine pointer to the current
monitor of that coroutine. Outside of coroutine context, we associate
the current monitor with the leader coroutine of the current thread.
Approaches to implement some form of coroutine local storage directly in
the coroutine core code have been considered and discarded because they
didn't end up being much more generic than the hash table and their
performance impact on coroutines not using coroutine local storage was
unclear. As the block layer uses a coroutine per I/O request, this is a
fast path and we have to be careful. It's safest to just stay out of
this path with code only used by the monitor.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201005155855.256490-8-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Mon, 5 Oct 2020 15:58:47 +0000 (17:58 +0200)]
qmp: Call monitor_set_cur() only in qmp_dispatch()
The correct way to set the current monitor for a coroutine handler will
be different than for a blocking handler, so monitor_set_cur() needs to
be called in qmp_dispatch().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-7-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Mon, 5 Oct 2020 15:58:46 +0000 (17:58 +0200)]
qmp: Assert that no other monitor is active
monitor_qmp_dispatch() is never supposed to be called in the context of
another monitor, so assert that monitor_cur() is NULL instead of saving
and restoring it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-6-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Mon, 5 Oct 2020 15:58:45 +0000 (17:58 +0200)]
hmp: Update current monitor only in handle_hmp_command()
The current monitor is updated relatively early in the command handling
code even though only the command handler actually needs it.
The current monitor will become coroutine-local later, so we can only
update it when we know in which coroutine the command will be exectued.
Move it to handle_hmp_command() where this information will be
available.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201005155855.256490-5-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Mon, 5 Oct 2020 15:58:44 +0000 (17:58 +0200)]
monitor: Use getter/setter functions for cur_mon
cur_mon really needs to be coroutine-local as soon as we move monitor
command handlers to coroutines and let them yield. As a first step, just
remove all direct accesses to cur_mon so that we can implement this in
the getter function later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-4-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Mon, 5 Oct 2020 15:58:43 +0000 (17:58 +0200)]
monitor: Add Monitor parameter to monitor_get_cpu_index()
Most callers actually don't have to rely on cur_mon, but already know
for which monitor they call monitor_get_cpu_index().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-3-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Mon, 5 Oct 2020 15:58:42 +0000 (17:58 +0200)]
monitor: Add Monitor parameter to monitor_set_cpu()
Most callers actually don't have to rely on cur_mon, but already know
for which monitor they call monitor_set_cpu().
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201005155855.256490-2-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Daniel Henrique Barboza [Wed, 7 Oct 2020 17:28:48 +0000 (14:28 -0300)]
spapr_numa: consider user input when defining associativity
A new function called spapr_numa_define_associativity_domains()
is created to calculate the associativity domains and change
the associativity arrays considering user input. This is how
the associativity domain between two NUMA nodes A and B is
calculated:
- get the distance D between them
- get the correspondent NUMA level 'n_level' for D. This is done
via a helper called spapr_numa_get_numa_level()
- all associativity arrays were initialized with their own
numa_ids, and we're calculating the distance in node_id ascending
order, starting from node id 0 (the first node retrieved by
numa_state). This will have a cascade effect in the algorithm because
the associativity domains that node 0 defines will be carried over to
other nodes, and node 1 associativities will be carried over after
taking node 0 associativities into account, and so on. This
happens because we'll assign assoc_src as the associativity domain
of dst as well, for all NUMA levels beyond and including n_level.
The PPC kernel expects the associativity domains of the first node
(node id 0) to be always 0 [1], and this algorithm will grant that
by default.
Ultimately, all of this results in a best effort approximation for
the actual NUMA distances the user input in the command line. Given
the nature of how PAPR itself interprets NUMA distances versus the
expectations risen by how ACPI SLIT works, there might be better
algorithms but, in the end, it'll also result in another way to
approximate what the user really wanted.
To keep this commit message no longer than it already is, the next
patch will update the existing documentation in ppc-spapr-numa.rst
with more in depth details and design considerations/drawbacks.
Daniel Henrique Barboza [Wed, 7 Oct 2020 17:28:47 +0000 (14:28 -0300)]
spapr_numa: change reference-points and maxdomain settings
This is the first guest visible change introduced in
spapr_numa.c. The previous settings of both reference-points
and maxdomains were too restrictive, but enough for the
existing associativity we're setting in the resources.
We'll change that in the following patches, populating the
associativity arrays based on user input. For those changes
to be effective, reference-points and maxdomains must be
more flexible. After this patch, we'll have 4 distinct
levels of NUMA (0x4, 0x3, 0x2, 0x1) and maxdomains will
allow for any type of configuration the user intends to
do - under the scope and limitations of PAPR itself, of
course.
Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20201007172849.302240-4-danielhb413@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Daniel Henrique Barboza [Wed, 7 Oct 2020 17:28:46 +0000 (14:28 -0300)]
spapr_numa: forbid asymmetrical NUMA setups
The pSeries machine does not support asymmetrical NUMA
configurations. This doesn't make much of a different
since we're not using user input for pSeries NUMA setup,
but this will change in the next patches.
To avoid breaking existing setups, gate this change by
checking for legacy NUMA support.
Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20201007172849.302240-3-danielhb413@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The changes to come to NUMA support are all guest visible. In
theory we could just create a new 5_1 class option flag to
avoid the changes to cascade to 5.1 and under. The reality is that
these changes are only relevant if the machine has more than one
NUMA node. There is no need to change guest behavior that has
been around for years needlesly.
This new helper will be used by the next patches to determine
whether we should retain the (soon to be) legacy NUMA behavior
in the pSeries machine. The new behavior will only be exposed
if:
- machine is pseries-5.2 and newer;
- more than one NUMA node is declared in NUMA state.
Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20201007172849.302240-2-danielhb413@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Mon, 14 Sep 2020 12:35:03 +0000 (14:35 +0200)]
spapr: Add a return value to spapr_check_pagesize()
As recommended in "qapi/error.h", return true on success and false on
failure. This allows to reduce error propagation overhead in the callers.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-14-groug@kaod.org> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Mon, 14 Sep 2020 12:35:02 +0000 (14:35 +0200)]
spapr: Add a return value to spapr_nvdimm_validate()
As recommended in "qapi/error.h", return true on success and false on
failure. This allows to reduce error propagation overhead in the callers.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-13-groug@kaod.org> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Mon, 14 Sep 2020 12:35:01 +0000 (14:35 +0200)]
spapr: Simplify error handling in spapr_cpu_core_realize()
As recommended in "qapi/error.h", add a bool return value to
spapr_realize_vcpu() and use it in spapr_cpu_core_realize()
in order to get rid of the error propagation overhead.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-12-groug@kaod.org> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Mon, 14 Sep 2020 12:35:00 +0000 (14:35 +0200)]
spapr: Add a return value to spapr_set_vcpu_id()
As recommended in "qapi/error.h", return true on success and false on
failure. This allows to reduce error propagation overhead in the callers.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-11-groug@kaod.org> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Mon, 14 Sep 2020 12:34:59 +0000 (14:34 +0200)]
spapr: Simplify error handling in prop_get_fdt()
Use the return value of visit_check_struct() and visit_check_list()
for error checking instead of local_err. This allows to get rid of
the error propagation overhead.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-10-groug@kaod.org> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Mon, 14 Sep 2020 12:34:58 +0000 (14:34 +0200)]
spapr: Add a return value to spapr_drc_attach()
As recommended in "qapi/error.h", return true on success and false on
failure. This allows to reduce error propagation overhead in the callers.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-9-groug@kaod.org> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Mon, 14 Sep 2020 12:34:57 +0000 (14:34 +0200)]
spapr: Simplify error handling in spapr_vio_busdev_realize()
Use the return value of spapr_irq_findone() and spapr_irq_claim()
to detect failures. This allows to reduce the error propagation
overhead.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-8-groug@kaod.org> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Mon, 14 Sep 2020 12:34:56 +0000 (14:34 +0200)]
spapr: Simplify error handling in do_client_architecture_support()
Use the return value of ppc_set_compat_all() to check failures,
which is preferred over hijacking local_err.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-7-groug@kaod.org> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Mon, 14 Sep 2020 12:34:55 +0000 (14:34 +0200)]
spapr: Get rid of cas_check_pvr() error reporting
The cas_check_pvr() function has two purposes:
- finding the "best" logical PVR, ie. the most recent one supported by
the guest for this CPU type
- checking if the guest supports the real PVR of this CPU type, which
is just an optional extra information to workaround the lack of
support for "compat" mode in PR KVM
This logic doesn't need error reporting, really. If we don't find a
suitable logical PVR, we return the special value 0 which is definitely
not a valid PVR. Let the caller decide on whether it should error out
or not.
This doesn't change the behavior.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-6-groug@kaod.org> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Mon, 14 Sep 2020 12:34:54 +0000 (14:34 +0200)]
spapr: Simplify error handling in callers of ppc_set_compat()
Now that ppc_set_compat() indicates success/failure with a return
value, use it and reduce error propagation overhead.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-5-groug@kaod.org> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Mon, 14 Sep 2020 12:34:53 +0000 (14:34 +0200)]
ppc: Fix return value in cpu_post_load() error path
VMState handlers are supposed to return negative errno values on failure.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-4-groug@kaod.org> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Mon, 14 Sep 2020 12:34:52 +0000 (14:34 +0200)]
ppc: Add a return value to ppc_set_compat() and ppc_set_compat_all()
As recommended in "qapi/error.h", indicate success / failure with a
return value. Since ppc_set_compat() is called from a VMState handler,
let's make it an int so that it propagates any negative errno returned
by kvmppc_set_compat(). Do the same for ppc_set_compat_all() for
consistency, even if it isn't called in a context where a negative errno
is required on failure.
This will allow to simplify error handling in the callers.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-3-groug@kaod.org> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr: Handle HPT allocation failure in nested guest
The nested KVM code does not yet support HPT guests. Calling the
KVM_CAP_PPC_ALLOC_HTAB ioctl currently leads to KVM setting the guest
as HPT and erroneously executing code in L1 that should only run in
hypervisor mode, leading to an exception in the L1 vcpu thread when it
enters the nested guest.
This can be reproduced with -machine max-cpu-compat=power8 in the L2
guest command line.
The KVM code has since been modified to fail the ioctl when running in
a nested environment so QEMU needs to be able to handle that. This
patch provides an error message informing the user about the lack of
support for HPT in nested guests.
Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20200911043123.204162-1-farosas@linux.ibm.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* remotes/pmaydell/tags/pull-target-arm-20201008-1:
target/arm: Make '-cpu max' have a 48-bit PA
hw/arm/virt: Implement kvm-steal-time
tests/qtest: Restore aarch64 arm-cpu-features test
hw/arm/virt: Move kvm pmu setup to virt_cpu_post_init
hw/arm/virt: Move post cpu realize check into its own function
target/arm/kvm: Make uncalled stubs explicitly unreachable
linux headers: sync to 5.9-rc7
hw/char/bcm2835_aux: Allow less than 32-bit accesses
hw/arm/sbsa-ref : allocate IRQs for SMMUv3
hw/arm/sbsa-ref : Fix SMMUv3 Initialisation
hw/arm/fsl-imx25: Fix a typo
hw/ssi/npcm7xx_fiu: Fix handling of unsigned integer
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 1 Oct 2020 16:01:16 +0000 (17:01 +0100)]
target/arm: Make '-cpu max' have a 48-bit PA
QEMU supports a 48-bit physical address range, but we don't currently
expose it in the '-cpu max' ID registers (you get the same range as
Cortex-A57, which is 44 bits).
Set the ID_AA64MMFR0.PARange field to indicate 48 bits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201001160116.18095-1-peter.maydell@linaro.org
Andrew Jones [Thu, 1 Oct 2020 06:17:18 +0000 (08:17 +0200)]
hw/arm/virt: Implement kvm-steal-time
We add the kvm-steal-time CPU property and implement it for machvirt.
A tiny bit of refactoring was also done to allow pmu and pvtime to
use the same vcpu device helper functions.
Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-7-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Thu, 1 Oct 2020 06:17:17 +0000 (08:17 +0200)]
tests/qtest: Restore aarch64 arm-cpu-features test
arm-cpu-features got dropped from the AArch64 tests during the meson
conversion shuffle.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-6-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Thu, 1 Oct 2020 06:17:16 +0000 (08:17 +0200)]
hw/arm/virt: Move kvm pmu setup to virt_cpu_post_init
Move the KVM PMU setup part of fdt_add_pmu_nodes() to
virt_cpu_post_init(), which is a more appropriate location. Now
fdt_add_pmu_nodes() is also named more appropriately, because it
no longer does anything but fdt node creation.
No functional change intended.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-5-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Thu, 1 Oct 2020 06:17:15 +0000 (08:17 +0200)]
hw/arm/virt: Move post cpu realize check into its own function
We'll add more to this new function in coming patches so we also
state the gic must be created and call it below create_gic().
No functional change intended.
Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-4-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Thu, 1 Oct 2020 06:17:14 +0000 (08:17 +0200)]
target/arm/kvm: Make uncalled stubs explicitly unreachable
When we compile without KVM support !defined(CONFIG_KVM) we generate
stubs for functions that the linker will still encounter. Sometimes
these stubs can be executed safely and are placed in paths where they
get executed with or without KVM. Other functions should never be
called without KVM. Those functions should be guarded by kvm_enabled(),
but should also be robust to refactoring mistakes. Putting a
g_assert_not_reached() in the function should help. Additionally,
the g_assert_not_reached() calls may actually help the linker remove
some code.
We remove the stubs for kvm_arm_get/put_virtual_time(), as they aren't
necessary at all - the only caller is in kvm.c
Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-3-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Thu, 1 Oct 2020 06:17:13 +0000 (08:17 +0200)]
linux headers: sync to 5.9-rc7
Update against Linux 5.9-rc7.
Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-2-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Fri, 2 Oct 2020 18:10:32 +0000 (20:10 +0200)]
hw/char/bcm2835_aux: Allow less than 32-bit accesses
The "BCM2835 ARM Peripherals" datasheet [*] chapter 2
("Auxiliaries: UART1 & SPI1, SPI2"), list the register
sizes as 3/8/16/32 bits. We assume this means this
peripheral allows 8-bit accesses.
This was not an issue until commit 5d971f9e67 which reverted
("memory: accept mismatching sizes in memory_region_access_valid").
The model is implemented as 32-bit accesses (see commit 97398d900c,
all registers are 32-bit) so replace MemoryRegionOps.valid as
MemoryRegionOps.impl, and re-introduce MemoryRegionOps.valid
with a 8/32-bit range.
Fixes: 97398d900c ("bcm2835_aux: add emulation of BCM2835 AUX (aka UART1) block") Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201002181032.1899463-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Graeme Gregory [Wed, 7 Oct 2020 10:07:32 +0000 (11:07 +0100)]
hw/arm/sbsa-ref : allocate IRQs for SMMUv3
Original commit did not allocate IRQs for the SMMUv3 in the irqmap
effectively using irq 0->3 (shared with other devices). Assuming
original intent was to allocate unique IRQs then add an allocation
to the irqmap.
Fixes: e9fdf453240 ("hw/arm: Add arm SBSA reference machine, devices part") Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Graeme Gregory <graeme@nuviainc.com> Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20201007100732.4103790-3-graeme@nuviainc.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Graeme Gregory [Wed, 7 Oct 2020 10:07:31 +0000 (11:07 +0100)]
hw/arm/sbsa-ref : Fix SMMUv3 Initialisation
SMMUv3 has an error in a previous patch where an i was transposed to a 1
meaning interrupts would not have been correctly assigned to the SMMUv3
instance.
Fixes: 48ba18e6d3f3 ("hw/arm/sbsa-ref: Simplify by moving the gic in the machine state") Signed-off-by: Graeme Gregory <graeme@nuviainc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20201007100732.4103790-2-graeme@nuviainc.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Fri, 2 Oct 2020 08:09:35 +0000 (10:09 +0200)]
hw/arm/fsl-imx25: Fix a typo
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201002080935.1660005-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Sat, 19 Sep 2020 13:24:35 +0000 (15:24 +0200)]
hw/ssi/npcm7xx_fiu: Fix handling of unsigned integer
Fix integer handling issues handling issue reported by Coverity:
hw/ssi/npcm7xx_fiu.c: 162 in npcm7xx_fiu_flash_read()
>>> CID 1432730: Integer handling issues (NEGATIVE_RETURNS)
>>> "npcm7xx_fiu_cs_index(fiu, f)" is passed to a parameter that cannot be negative.
162 npcm7xx_fiu_select(fiu, npcm7xx_fiu_cs_index(fiu, f));
hw/ssi/npcm7xx_fiu.c: 221 in npcm7xx_fiu_flash_write()
218 cs_id = npcm7xx_fiu_cs_index(fiu, f);
219 trace_npcm7xx_fiu_flash_write(DEVICE(fiu)->canonical_path, cs_id, addr,
220 size, v);
>>> CID 1432729: Integer handling issues (NEGATIVE_RETURNS)
>>> "cs_id" is passed to a parameter that cannot be negative.
221 npcm7xx_fiu_select(fiu, cs_id);
Since the index of the flash can not be negative, return an
unsigned type.
Kele Huang [Fri, 2 Oct 2020 08:14:20 +0000 (16:14 +0800)]
accel/tcg: Fix computing of is_write for MIPS
Detect all MIPS store instructions in cpu_signal_handler for all available
MIPS versions, and set is_write if encountering such store instructions.
This fixed the error while dealing with self-modified code for MIPS.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Kele Huang <kele.hwang@gmail.com> Signed-off-by: Xu Zou <iwatchnima@gmail.com>
Message-Id: <20201002081420.10814-1-kele.hwang@gmail.com>
[rth: Use uintptr_t for pc to fix n32 build error.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Mon, 7 Sep 2020 01:27:41 +0000 (18:27 -0700)]
tcg: Fix generation of dupi_vec for 32-bit host
The definition of INDEX_op_dupi_vec is that it operates on
units of tcg_target_ulong -- in this case 32 bits. It does
not work to use this for a uint64_t value that happens to be
small enough to fit in tcg_target_ulong.
Fixes: d2fd745fe8b Fixes: db432672dc5 Cc: qemu-stable@nongnu.org Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Fri, 5 Apr 2019 02:34:19 +0000 (19:34 -0700)]
tcg: Move some TCG_CT_* bits to TCGArgConstraint bitfields
These are easier to set and test when they have their own fields.
Reduce the size of alias_index and sort_index to 4 bits, which is
sufficient for TCG_MAX_OP_ARGS. This leaves only the bits indicating
constants within the ct field.
Move all initialization to allocation time, rather than init
individual fields in process_op_defs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Thu, 3 Sep 2020 22:56:24 +0000 (15:56 -0700)]
tcg: Remove TCG_CT_REG
This wasn't actually used for anything, really. All variable
operands must accept registers, and which are indicated by the
set in TCGArgConstraint.regs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Sun, 30 Aug 2020 15:57:20 +0000 (08:57 -0700)]
tcg: Adjust simd_desc size encoding
With larger vector sizes, it turns out oprsz == maxsz, and we only
need to represent mismatch for oprsz <= 32. We do, however, need
to represent larger oprsz and do so without reducing SIMD_DATA_BITS.
Reduce the size of the oprsz field and increase the maxsz field.
Steal the oprsz value of 24 to indicate equality with maxsz.
Tested-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Thu, 8 Oct 2020 10:32:54 +0000 (11:32 +0100)]
Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging
machine + QOM queue, 2020-10-06
* QOM documentation fixes and cleanups (Eduardo Habkost)
* user-mode: Prune build dependencies (Philippe Mathieu-Daudé)
* qom: Improve error message (Philippe Mathieu-Daudé)
* numa: hmat: require parent cache description before the next
level one (Igor Mammedov)
# gpg: Signature made Tue 06 Oct 2020 23:09:03 BST
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/machine-next-pull-request: (21 commits)
numa: hmat: require parent cache description before the next level one
kernel-doc: Remove $decl_type='type name' hack
memory: Explicitly tag doc comments for structs
qom: Explicitly tag doc comments for typedefs and structs
kernel-doc: Handle function typedefs without asterisks
kernel-doc: Handle function typedefs that return pointers
docs/devel/qom: Avoid long lines
docs/devel/qom: Remove usage of <code>
docs/devel/qom: Use *emphasis* for emphasis
docs/devel/qom: Fix indentation of code blocks
docs/devel/qom: Fix indentation of bulleted list
qom: Fix DECLARE_*CHECKER documentation
qom: Improve error message displayed with missing object properties
hw/core/cpu: Add missing 'exec/cpu-common.h' include
hw/core/qdev-properties: Extract system-mode specific properties
hw/core/qdev-properties: Export some integer-related functions
hw/core/qdev-properties: Export qdev_prop_enum
hw/core/qdev-properties: Export enum-related functions
hw/core/qdev-properties: Fix code style
hw/core/qdev-properties: Use qemu_strtoul() in set_pci_host_devaddr()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/huth-gitlab/tags/pull-request-2020-10-06:
tests/qtest/cdrom: Add more s390x-related boot tests
pc-bios/s390: Update the s390-ccw bios binaries
pc-bios: s390x: Go into disabled wait when encountering a PGM exception
pc-bios: s390x: Use reset PSW if avaliable
pc-bios: s390x: Save PSW rework
pc-bios: s390x: Fix bootmap.c zipl component entry data handling
pc-bios/s390-ccw: break loop if a null block number is reached
pc-bios/s390-ccw: fix off-by-one error
pc-bios/s390-ccw/main: Remove superfluous call to enable_subchannel()
pc-bios/s390-ccw: Allow booting in case the first virtio-blk disk is bad
pc-bios/s390-ccw: Scan through all devices if no boot device specified
pc-bios/s390-ccw: Do not bail out early if not finding a SCSI disk
pc-bios/s390-ccw: Move the inner logic of find_subch() to a separate function
pc-bios/s390-ccw: Introduce ENODEV define and remove guards of others
pc-bios/s390-ccw: Move ipl-related code from main() into a separate function
pc-bios/s390-ccw/Makefile: Compile with -std=gnu99, -fwrapv and -fno-common
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Thomas Huth [Thu, 6 Aug 2020 10:16:13 +0000 (12:16 +0200)]
tests/qtest/cdrom: Add more s390x-related boot tests
Let's add two new tests:
1) Booting with "bootindex" is the architected default behavior on the
s390x target, so we should have at least one test that is using the
"bootindex" property.
2) The s390-ccw bios used to fail when other unbootable devices have
been specified before the bootable device (without "bootindex"). Now
that the s390-ccw bios is a little bit smarter here, we should test
this scenario, too, to avoid regressions.
Message-Id: <20200806105349.632-10-thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Janosch Frank [Tue, 6 Oct 2020 09:42:49 +0000 (05:42 -0400)]
pc-bios: s390x: Go into disabled wait when encountering a PGM exception
Let's setup a PGM PSW, so we won't load 0s when a program exception
happens. Instead we'll load a disabled wait PSW.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201006094249.50640-5-frankja@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Janosch Frank [Tue, 6 Oct 2020 09:42:48 +0000 (05:42 -0400)]
pc-bios: s390x: Use reset PSW if avaliable
If a blob provides a reset PSW then we should use it instead of
branching to the PSW address and using our own mask.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201006094249.50640-4-frankja@linux.ibm.com>
[thuth: Use Elvis operator to shorten long line] Signed-off-by: Thomas Huth <thuth@redhat.com>
Janosch Frank [Tue, 6 Oct 2020 09:42:47 +0000 (05:42 -0400)]
pc-bios: s390x: Save PSW rework
We don't need to save the ipl_continue variable in lowcore and have it
limited to 32 bits because of the lowcore layout. Let's move it to a
new 64 bit variable and get rid of the reset info struct.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201006094249.50640-3-frankja@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Janosch Frank [Tue, 6 Oct 2020 09:42:46 +0000 (05:42 -0400)]
pc-bios: s390x: Fix bootmap.c zipl component entry data handling
The two main types of zipl component entries are execute and
load/data. The last member of the component entry struct therefore
denotes either a PSW or an address. Let's make this a bit more clear
by introducing a union and cleaning up the code that uses that struct
member.
The execute type component entries written by zipl contain short PSWs,
not addresses. Let's mask them and only pass the address part to
jump_to_IPL_code(uint64_t address) because it expects an address as
visible by the name of the argument.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201006094249.50640-2-frankja@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Marc Hartmayer [Thu, 24 Sep 2020 08:59:25 +0000 (10:59 +0200)]
pc-bios/s390-ccw: break loop if a null block number is reached
Break the loop if `cur_block_nr` is a null block number because this
means that the end of chunk is reached. In this case we will try to
boot the default entry.
Fixes: ba831b25262a ("s390-ccw: read stage2 boot loader data to find menu") Reviewed-by: Collin Walling <walling@linux.ibm.com> Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Message-Id: <20200924085926.21709-3-mhartmay@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Marc Hartmayer [Thu, 24 Sep 2020 08:59:24 +0000 (10:59 +0200)]
pc-bios/s390-ccw: fix off-by-one error
This error takes effect when the magic value "zIPL" is located at the
end of a block. For example if s2_cur_blk = 0x7fe18000 and the magic
value "zIPL" is located at 0x7fe18ffc - 0x7fe18fff.
Fixes: ba831b25262a ("s390-ccw: read stage2 boot loader data to find menu") Reviewed-by: Collin Walling <walling@linux.ibm.com> Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Message-Id: <20200924085926.21709-2-mhartmay@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Use "<= ... - 4" instead of "< ... - 3"] Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Thu, 6 Aug 2020 09:41:51 +0000 (11:41 +0200)]
pc-bios/s390-ccw/main: Remove superfluous call to enable_subchannel()
enable_subchannel() is already done during is_dev_possibly_bootable()
(which is called from find_boot_device() -> find_subch()), so there
is no need to do this again in the main() function.
Message-Id: <20200806105349.632-9-thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Tue, 28 Jul 2020 16:14:50 +0000 (18:14 +0200)]
pc-bios/s390-ccw: Allow booting in case the first virtio-blk disk is bad
If you try to boot with two virtio-blk disks (without bootindex), and
only the second one is bootable, the s390-ccw bios currently stops at
the first disk and does not continue booting from the second one. This
is annoying - and all other major QEMU firmwares succeed to boot from
the second disk in this case, so we should do the same in the s390-ccw
bios, too.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200806105349.632-8-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Tue, 28 Jul 2020 14:29:03 +0000 (16:29 +0200)]
pc-bios/s390-ccw: Scan through all devices if no boot device specified
If no boot device has been specified (via "bootindex=..."), the s390-ccw
bios scans through all devices to find a bootable device. But so far, it
stops at the very first block device (including virtio-scsi controllers
without attached devices) that it finds, no matter whether it is bootable
or not. That leads to some weird situatation where it is e.g. possible
to boot via:
qemu-system-s390x -hda /path/to/disk.qcow2
but not if there is e.g. a virtio-scsi controller specified before:
While using "bootindex=..." is clearly the preferred way of booting
on s390x, we still can make the life for the users at least a little
bit easier if we look at all available devices to find a bootable one.
Thomas Huth [Tue, 28 Jul 2020 12:30:14 +0000 (14:30 +0200)]
pc-bios/s390-ccw: Do not bail out early if not finding a SCSI disk
In case the user did not specify a boot device, we want to continue
looking for other devices if there are no valid SCSI disks on a virtio-
scsi controller. As a first step, do not panic in this case and let
the control flow carry the error to the upper functions instead.
Message-Id: <20200806105349.632-6-thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
projects / users / dwmw2 / qemu.git / log