Dev Jain [Wed, 22 May 2024 07:04:35 +0000 (12:34 +0530)]
selftests/mm: va_high_addr_switch: dynamically initialize testcases to enable LPA2 testing
Post FEAT_LPA2, the Aarch64 Linux kernel extends higher address support to
4K and 16K translation granules. To support testing this out, we need to
do away with static initialization of page size, while still maintaining
the nice array of testcases; this can be achieved by initializing and
populating the array as a stack variable, and filling in the page size and
hugepage size at runtime.
Link: https://lkml.kernel.org/r/20240522070435.773918-3-dev.jain@arm.com Signed-off-by: Dev Jain <dev.jain@arm.com> Suggested-by: Andrew Morton <akpm@linux-foundation.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dev Jain [Wed, 22 May 2024 07:04:34 +0000 (12:34 +0530)]
selftests/mm: va_high_addr_switch: reduce test noise
Patch series "Restructure va_high_addr_switch".
The va_high_addr_switch memory selftest tests out some corner cases
related to allocation and page/hugepage faulting around the switch
boundary. Currently, the page size and hugepage size have been statically
defined. Post FEAT_LPA2, the Aarch64 Linux kernel adds support for 4k and
16k translation granules on higher addresses; we restructure the test to
support the same. In addition, we avoid invocation of the binary twice,
in the shell script, to reduce test noise.
This patch (of 2):
When invoking the binary with "--run-hugetlb" flag, the testcases
involving the base page are anyways going to be run. Therefore, remove
duplication by invoking the binary only once.
David Hildenbrand [Wed, 22 May 2024 12:57:13 +0000 (14:57 +0200)]
mm/rmap: sanity check that zeropages are not passed to RMAP
Using insert_page() we might have previously ended up passing the zeropage
into rmap code. Make sure that won't happen again.
Note that we won't check the huge zeropage for now, which might still end
up in RMAP code.
Link: https://lkml.kernel.org/r/20240522125713.775114-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Wed, 22 May 2024 12:57:12 +0000 (14:57 +0200)]
mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()
For now we only get the (small) zeropage mapped to user space in four
cases (excluding VM_PFNMAP mappings, such as /proc/vmstat):
(1) Read page faults in anonymous VMAs (MAP_PRIVATE|MAP_ANON):
do_anonymous_page() will not refcount it and map it pte_mkspecial()
(2) UFFDIO_ZEROPAGE on anonymous VMA or COW mapping of shmem
(MAP_PRIVATE). mfill_atomic_pte_zeropage() will not refcount it and
map it pte_mkspecial().
(3) KSM in mergeable VMA (anonymous VMA or COW mapping).
cmp_and_merge_page() will not refcount it and map it
pte_mkspecial().
(4) FSDAX as an optimization for holes.
vmf_insert_mixed()->__vm_insert_mixed() might end up calling
insert_page() without CONFIG_ARCH_HAS_PTE_SPECIAL, refcounting the
zeropage and not mapping it pte_mkspecial(). With
CONFIG_ARCH_HAS_PTE_SPECIAL, we'll call insert_pfn() where we will
not refcount it and map it pte_mkspecial().
In case (4), we might not have VM_MIXEDMAP set: while fs/fuse/dax.c sets
VM_MIXEDMAP, we removed it for ext4 fsdax in commit e1fb4a086495 ("dax:
remove VM_MIXEDMAP for fsdax and device dax") and for XFS in commit e1fb4a086495 ("dax: remove VM_MIXEDMAP for fsdax and device dax").
Without CONFIG_ARCH_HAS_PTE_SPECIAL and with VM_MIXEDMAP, vm_normal_page()
would currently return the zeropage. We'll refcount the zeropage when
mapping and when unmapping.
Without CONFIG_ARCH_HAS_PTE_SPECIAL and without VM_MIXEDMAP,
vm_normal_page() would currently refuse to return the zeropage. So we'd
refcount it when mapping but not when unmapping it ... do we have fsdax
without CONFIG_ARCH_HAS_PTE_SPECIAL in practice? Hard to tell.
Independent of that, we should never refcount the zeropage when we might
be holding that reference for a long time, because even without an
accounting imbalance we might overflow the refcount. As there is interest
in using the zeropage also in other VM_MIXEDMAP mappings, let's add clean
support for that in the cases where it makes sense:
(A) Never refcount the zeropage when mapping it:
In insert_page(), special-case the zeropage, do not refcount it, and use
pte_mkspecial(). Don't involve insert_pfn(), adjusting insert_page()
looks cleaner than branching off to insert_pfn().
(B) Never refcount the zeropage when unmapping it:
In vm_normal_page(), also don't return the zeropage in a VM_MIXEDMAP
mapping without CONFIG_ARCH_HAS_PTE_SPECIAL. Add a VM_WARN_ON_ONCE()
sanity check if we'd ever return the zeropage, which could happen if
someone forgets to set pte_mkspecial() when mapping the zeropage.
Document that.
(C) Allow the zeropage only where reasonable
s390x never wants the zeropage in some processes running legacy KVM guests
that make use of storage keys. So disallow that.
Further, using the zeropage in COW mappings is unproblematic (just what we
do for other COW mappings), because FAULT_FLAG_UNSHARE can just unshare it
and GUP with FOLL_LONGTERM would work as expected.
Similarly, mappings that can never have writable PTEs (implying no write
faults) are also not problematic, because nothing could end up mapping the
PTE writable by mistake later. But in case we could have writable PTEs,
we'll only allow the zeropage in FSDAX VMAs, that are incompatible with
GUP and are blocked there completely.
We'll always require the zeropage to be mapped with pte_special().
GUP-fast will reject the zeropage that way, but GUP-slow will allow it.
(Note that GUP does not refcount the zeropage with FOLL_PIN, because there
were issues with overflowing the refcount in the past).
Add sanity checks to can_change_pte_writable() and wp_page_reuse(), to
catch early during testing if we'd ever find a zeropage unexpectedly in
code that wants to upgrade write permissions.
Convert the BUG_ON in vm_mixed_ok() to an ordinary check and simply fail
with VM_FAULT_SIGBUS, like we do for other sanity checks. Drop the stale
comment regarding reserved pages from insert_page().
Note that:
* we won't mess with VM_PFNMAP mappings for now. remap_pfn_range() and
vmf_insert_pfn() would allow the zeropage in some cases and
not refcount it.
* vmf_insert_pfn*() will reject the zeropage in VM_MIXEDMAP
mappings and we'll leave that alone for now. People can simply use
one of the other interfaces.
* we won't bother with the huge zeropage for now. It's never
PTE-mapped and also GUP does not special-case it yet.
Link: https://lkml.kernel.org/r/20240522125713.775114-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Wed, 22 May 2024 12:57:11 +0000 (14:57 +0200)]
mm/memory: move page_count() check into validate_page_before_insert()
Patch series "mm/memory: cleanly support zeropage in vm_insert_page*(),
vm_map_pages*() and vmf_insert_mixed()", v2.
There is interest in mapping zeropages via vm_insert_pages() [1] into
MAP_SHARED mappings.
For now, we only get zeropages in MAP_SHARED mappings via
vmf_insert_mixed() from FSDAX code, and I think it's a bit shaky in some
cases because we refcount the zeropage when mapping it but not necessarily
always when unmapping it ... and we should actually never refcount it.
It's all a bit tricky, especially how zeropages in MAP_SHARED mappings
interact with GUP (FOLL_LONGTERM), mprotect(), write-faults and s390x
forbidding the shared zeropage (rewrite [2] s now upstream).
This series tries to take the careful approach of only allowing the
zeropage where it is likely safe to use (which should cover the existing
FSDAX use case and [1]), preventing that it could accidentally get mapped
writable during a write fault, mprotect() etc, and preventing issues with
FOLL_LONGTERM in the future with other users.
Tested with a patch from Vincent that uses the zeropage in context of
[1].
We'll now also cover the case where insert_page() is called from
__vm_insert_mixed(), which sounds like the right thing to do.
Link: https://lkml.kernel.org/r/20240522125713.775114-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sidhartha Kumar [Mon, 20 May 2024 22:44:07 +0000 (15:44 -0700)]
mm/hugetlb: remove {Set,Clear}Hpage macros
All users have been converted to use the folio version of these macros, we
can safely remove the page based interface.
Link: https://lkml.kernel.org/r/20240520224407.110062-1-sidhartha.kumar@oracle.com Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Muchun Song <muchun.song@linux.dev> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Tue, 21 May 2024 17:58:53 +0000 (01:58 +0800)]
mm/swap: reduce swap cache search space
Currently we use one swap_address_space for every 64M chunk to reduce lock
contention, this is like having a set of smaller swap files inside one
swap device. But when doing swap cache look up or insert, we are still
using the offset of the whole large swap device. This is OK for
correctness, as the offset (key) is unique.
But Xarray is specially optimized for small indexes, it creates the radix
tree levels lazily to be just enough to fit the largest key stored in one
Xarray. So we are wasting tree nodes unnecessarily.
For 64M chunk it should only take at most 3 levels to contain everything.
But if we are using the offset from the whole swap device, the offset
(key) value will be way beyond 64M, and so will the tree level.
Optimize this by using a new helper swap_cache_index to get a swap entry's
unique offset in its own 64M swap_address_space.
I see a ~1% performance gain in benchmark and actual workload with high
memory pressure.
Test with `time memhog 128G` inside a 8G memcg using 128G swap (ramdisk
with SWP_SYNCHRONOUS_IO dropped, tested 3 times, results are stable. The
test result is similar but the improvement is smaller if
SWP_SYNCHRONOUS_IO is enabled, as swap out path can never skip swap
cache):
Similar result with MySQL and sysbench using swap:
Before:
94055.61 qps
After (0.8% faster):
94834.91 qps
Radix tree slab usage is also very slightly lower.
Link: https://lkml.kernel.org/r/20240521175854.96038-12-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chao Yu <chao@kernel.org> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Marc Dionne <marc.dionne@auristor.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Minchan Kim <minchan@kernel.org> Cc: NeilBrown <neilb@suse.de> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Xiubo Li <xiubli@redhat.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Tue, 21 May 2024 17:58:52 +0000 (01:58 +0800)]
mm: drop page_index and simplify folio_index
There are two helpers for retrieving the index within address space for
mixed usage of swap cache and page cache:
- page_index
- folio_index
This commit drops page_index, as we have eliminated all users, and
converts folio_index's helper __page_file_index to use folio to avoid the
page conversion.
Link: https://lkml.kernel.org/r/20240521175854.96038-11-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chao Yu <chao@kernel.org> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Marc Dionne <marc.dionne@auristor.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Minchan Kim <minchan@kernel.org> Cc: NeilBrown <neilb@suse.de> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Xiubo Li <xiubli@redhat.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Tue, 21 May 2024 17:58:51 +0000 (01:58 +0800)]
mm: remove page_file_offset and folio_file_pos
These two helpers were useful for mixed usage of swap cache and page
cache, which help retrieve the corresponding file or swap device offset of
a page or folio.
They were introduced in commit f981c5950fa8 ("mm: methods for teaching
filesystems about PG_swapcache pages") and used in commit d56b4ddf7781
("nfs: teach the NFS client how to treat PG_swapcache pages"), suppose to
be used with direct_IO for swap over fs.
But after commit e1209d3a7a67 ("mm: introduce ->swap_rw and use it for
reads from SWP_FS_OPS swap-space"), swap with direct_IO is no more, and
swap cache mapping is never exposed to fs.
Now we have dropped all users of page_file_offset and folio_file_pos, so
they can be deleted.
Link: https://lkml.kernel.org/r/20240521175854.96038-10-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chao Yu <chao@kernel.org> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Marc Dionne <marc.dionne@auristor.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Minchan Kim <minchan@kernel.org> Cc: NeilBrown <neilb@suse.de> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Xiubo Li <xiubli@redhat.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Tue, 21 May 2024 17:58:50 +0000 (01:58 +0800)]
mm/swap: get the swap device offset directly
folio_file_pos and page_file_offset are for mixed usage of swap cache and
page cache, it can't be page cache here, so introduce a new helper to get
the swap offset in swap device directly.
Need to include swapops.h in mm/swap.h to ensure swp_offset is always
defined before use.
Link: https://lkml.kernel.org/r/20240521175854.96038-9-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chao Yu <chao@kernel.org> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Marc Dionne <marc.dionne@auristor.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Minchan Kim <minchan@kernel.org> Cc: NeilBrown <neilb@suse.de> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Xiubo Li <xiubli@redhat.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
These two are used through DEFINE_NFS_FOLIO_EVENT and
DEFINE_NFS_FOLIO_EVENT_DONE, which defined following events:
- trace_nfs_aop_readpage{_done}: only called by nfs_read_folio
- trace_nfs_writeback_folio: only called by nfs_wb_folio
- trace_nfs_invalidate_folio: only called by nfs_invalidate_folio
- trace_nfs_launder_folio_done: only called by nfs_launder_folio
None of them could possibly be used on swap cache folio,
nfs_read_folio only called by:
.write_begin -> nfs_read_folio
.read_folio
Also, seeing from the swap side, swap_rw is now the only interface calling
into fs, the offset info is always in iocb.ki_pos now.
So we can remove all these folio_file_pos call safely.
Link: https://lkml.kernel.org/r/20240521175854.96038-8-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chao Yu <chao@kernel.org> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Marc Dionne <marc.dionne@auristor.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Minchan Kim <minchan@kernel.org> Cc: NeilBrown <neilb@suse.de> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: Xiubo Li <xiubli@redhat.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Tue, 21 May 2024 17:58:48 +0000 (01:58 +0800)]
netfs: drop usage of folio_file_pos
folio_file_pos is only needed for mixed usage of page cache and swap
cache, for pure page cache usage, the caller can just use folio_pos
instead.
It can't be a swap cache page here. Swap mapping may only call into fs
through swap_rw and that is not supported for netfs. So just drop it and
use folio_pos instead.
Link: https://lkml.kernel.org/r/20240521175854.96038-7-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Cc: David Howells <dhowells@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Anna Schumaker <anna@kernel.org> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chao Yu <chao@kernel.org> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Marc Dionne <marc.dionne@auristor.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Minchan Kim <minchan@kernel.org> Cc: NeilBrown <neilb@suse.de> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Xiubo Li <xiubli@redhat.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Tue, 21 May 2024 17:58:47 +0000 (01:58 +0800)]
afs: drop usage of folio_file_pos
folio_file_pos is only needed for mixed usage of page cache and swap
cache, for pure page cache usage, the caller can just use folio_pos
instead.
It can't be a swap cache page here. Swap mapping may only call into fs
through swap_rw and that is not supported for afs. So just drop it and
use folio_pos instead.
Link: https://lkml.kernel.org/r/20240521175854.96038-6-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Cc: David Howells <dhowells@redhat.com> Cc: Marc Dionne <marc.dionne@auristor.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chao Yu <chao@kernel.org> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Minchan Kim <minchan@kernel.org> Cc: NeilBrown <neilb@suse.de> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Xiubo Li <xiubli@redhat.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Tue, 21 May 2024 17:58:46 +0000 (01:58 +0800)]
NFS: remove nfs_page_lengthg and usage of page_index
This function is no longer used after commit 4fa7a717b432 ("NFS: Fix up
nfs_vm_page_mkwrite() for folios"), all users have been converted to use
folio instead, just delete it to remove usage of page_index.
Link: https://lkml.kernel.org/r/20240521175854.96038-5-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chao Yu <chao@kernel.org> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Marc Dionne <marc.dionne@auristor.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Minchan Kim <minchan@kernel.org> Cc: NeilBrown <neilb@suse.de> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: Xiubo Li <xiubli@redhat.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Tue, 21 May 2024 17:58:45 +0000 (01:58 +0800)]
ceph: drop usage of page_index
page_index is needed for mixed usage of page cache and swap cache, for
pure page cache usage, the caller can just use page->index instead.
It can't be a swap cache page here, so just drop it.
Link: https://lkml.kernel.org/r/20240521175854.96038-4-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Cc: Xiubo Li <xiubli@redhat.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Anna Schumaker <anna@kernel.org> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chao Yu <chao@kernel.org> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Marc Dionne <marc.dionne@auristor.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Minchan Kim <minchan@kernel.org> Cc: NeilBrown <neilb@suse.de> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Tue, 21 May 2024 17:58:44 +0000 (01:58 +0800)]
nilfs2: drop usage of page_index
Patch series "mm/swap: clean up and optimize swap cache index", v6.
Currently we use one swap_address_space for every 64M chunk to reduce lock
contention, this is like having a set of smaller files inside a swap
device. But when doing swap cache look up or insert, we are still using
the offset of the whole large swap device. This is OK for correctness, as
the offset (key) is unique.
But Xarray is specially optimized for small indexes, it creates the redix
tree levels lazily to be just enough to fit the largest key stored in one
Xarray. So we are wasting tree nodes unnecessarily.
For 64M chunk it should only take at most 3 level to contain everything.
But if we are using the offset from the whole swap device, the offset
(key) value will be way beyond 64M, and so will the tree level.
Optimize this by reduce the swap cache search space into 64M scope.
Test with `time memhog 128G` inside a 8G memcg using 128G swap (ramdisk
with SWP_SYNCHRONOUS_IO dropped, tested 3 times, results are stable. The
test result is similar but the improvement is smaller if
SWP_SYNCHRONOUS_IO is enabled, as swap out path can never skip swap
cache):
Similar result with MySQL and sysbench using swap:
Before:
94055.61 qps
After (+0.8% faster):
94834.91 qps
There is alse a very slight drop of radix tree node slab usage:
Before: 303952K
After: 302224K
For this series:
There are multiple places that expect mixed type of pages (page cache or
swap cache), eg. migration, huge memory split; There are four helpers
for that:
To keep the code clean and compatible, this series first cleaned up usage
of them.
page_file_offset and folio_file_pos are historical helpes that can be
simply dropped after clean up. And page_index can be all converted to
folio_index or folio->index.
Then introduce two new helpers swap_cache_index and swap_dev_pos for swap.
Replace swp_offset with swap_cache_index when used to retrieve folio from
swap cache, and use swap_dev_pos when needed to retrieve the device
position of a swap entry. This way, swap_cache_index can return the
optimized value with no compatibility issue.
The result is better performance and reduced LOC.
Idealy, in the future, we may want to reduce SWAP_ADDRESS_SPACE_SHIFT from
14 to 12: Default Xarray chunk offset is 6, so we have 3 level trees
instead of 2 level trees just for 2 extra bits. But swap cache is based
on address_space struct, with 4 times more metadata sparsely distributed
in memory it waste more cacheline, the performance gain from this series
is almost canceled according to my test. So first, just have a cleaner
seperation of offsets and smaller search space.
This patch (of 10):
page_index is only for mixed usage of page cache and swap cache, for pure
page cache usage, the caller can just use page->index instead.
It can't be a swap cache page here (being part of buffer head), so just
drop it. And while we are at it, optimize the code by retrieving the
offset of the buffer head within the folio directly using bh_offset, and
get rid of the loop and usage of page helpers.
Link: https://lkml.kernel.org/r/20240521175854.96038-1-ryncsn@gmail.com Link: https://lkml.kernel.org/r/20240521175854.96038-3-ryncsn@gmail.com Suggested-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Kairui Song <kasong@tencent.com> Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chao Yu <chao@kernel.org> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Marc Dionne <marc.dionne@auristor.com> Cc: Minchan Kim <minchan@kernel.org> Cc: NeilBrown <neilb@suse.de> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Xiubo Li <xiubli@redhat.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kemeng Shi [Tue, 14 May 2024 12:52:48 +0000 (20:52 +0800)]
writeback: add general function domain_dirty_avail to calculate dirty and avail of domain
Add general function domain_dirty_avail to calculate dirty and avail for
either dirty limit or background writeback in either global domain or wb
domain.
Kemeng Shi [Tue, 14 May 2024 12:52:47 +0000 (20:52 +0800)]
writeback: factor out wb_bg_dirty_limits to remove repeated code
Patch series "Add helper functions to remove repeated code and improve
readability of cgroup writeback", v2.
This series adds a lot of helpers to remove repeated code between domain
and wb; dirty limit and dirty background; global domain and wb domain.
The helpers also improve readability. More details can be found in the
respective patches.
A simple domain hierarchy is tested:
global domain (> 20G)
|
cgroup domain1(10G)
|
wb1
|
fio
Test steps:
/* make it easy to observe */
echo 300000 > /proc/sys/vm/dirty_expire_centisecs
echo 3000 > /proc/sys/vm/dirty_writeback_centisecs
/* run fio to generate dirty pages */
fio -name test -filename=/bdi1/file -size=xxx -ioengine=libaio -bs=4K \
-iodepth=1 -rw=write -direct=0 --time_based -runtime=600 -invalidate=0
When fio size is 1G, the wb is in freerun state and dirty pages are only
written back when dirty inode is expired after 30 seconds. When fio size
is 2G, the dirty pages keep being written back and bandwidth of fio is
limited.
This patch (of 8):
Similar to wb_dirty_limits which calculates dirty and thresh of wb,
wb_bg_dirty_limits calculates background dirty and background thresh of
wb. With wb_bg_dirty_limits, we could remove repeated code in
wb_over_bg_thresh.
Shakeel Butt [Wed, 29 May 2024 15:49:11 +0000 (08:49 -0700)]
mm: vmscan: reset sc->priority on retry
The commit 6be5e186fd65 ("mm: vmscan: restore incremental cgroup
iteration") added a retry reclaim heuristic to iterate all the cgroups
before returning an unsuccessful reclaim but missed to reset the
sc->priority. Let's fix it.
Link: https://lkml.kernel.org/r/20240529154911.3008025-1-shakeel.butt@linux.dev Fixes: 6be5e186fd65 ("mm: vmscan: restore incremental cgroup iteration") Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev> Reported-by: syzbot+17416257cb95200cba44@syzkaller.appspotmail.com Tested-by: syzbot+17416257cb95200cba44@syzkaller.appspotmail.com Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Johannes Weiner [Tue, 14 May 2024 20:26:41 +0000 (16:26 -0400)]
mm: vmscan: restore incremental cgroup iteration
Currently, reclaim always walks the entire cgroup tree in order to ensure
fairness between groups. While overreclaim is limited in shrink_lruvec(),
many of our systems have a sizable number of active groups, and an even
bigger number of idle cgroups with cache left behind by previous jobs; the
mere act of walking all these cgroups can impose significant latency on
direct reclaimers.
In the past, we've used a save-and-restore iterator that enabled
incremental tree walks over multiple reclaim invocations. This ensured
fairness, while keeping the work of individual reclaimers small.
However, in edge cases with a lot of reclaim concurrency, individual
reclaimers would sometimes not see enough of the cgroup tree to make
forward progress and (prematurely) declare OOM. Consequently we switched
to comprehensive walks in 1ba6fc9af35b ("mm: vmscan: do not share cgroup
iteration between reclaimers").
To address the latency problem without bringing back the premature OOM
issue, reinstate the shared iteration, but with a restart condition to do
the full walk in the OOM case - similar to what we do for memory.low
enforcement and active page protection.
In the worst case, we do one more full tree walk before declaring
OOM. But the vast majority of direct reclaim scans can then finish
much quicker, while fairness across the tree is maintained:
- Before this patch, we observed that direct reclaim always takes more
than 100us and most direct reclaim time is spent in reclaim cycles
lasting between 1ms and 1 second. Almost 40% of direct reclaim time
was spent on reclaim cycles exceeding 100ms.
- With this patch, almost all page reclaim cycles last less than 10ms,
and a good amount of direct page reclaim finishes in under 100us. No
page reclaim cycles lasting over 100ms were observed anymore.
The shared iterator state is maintaned inside the target cgroup, so
fair and incremental walks are performed during both global reclaim
and cgroup limit reclaim of complex subtrees.
Link: https://lkml.kernel.org/r/20240514202641.2821494-1-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Rik van Riel <riel@surriel.com> Reported-by: Rik van Riel <riel@surriel.com> Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev> Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Facebook Kernel Team <kernel-team@fb.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ran Xiaokai [Wed, 15 May 2024 02:47:54 +0000 (10:47 +0800)]
mm/huge_memory: mark racy access onhuge_anon_orders_always
huge_anon_orders_always is accessed lockless, it is better to use the
READ_ONCE() wrapper. This is not fixing any visible bug, hopefully this
can cease some KCSAN complains in the future. Also do that for
huge_anon_orders_madvise.
Link: https://lkml.kernel.org/r/20240515104754889HqrahFPePOIE1UlANHVAh@zte.com.cn Signed-off-by: Ran Xiaokai <ran.xiaokai@zte.com.cn> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Lu Zhongjun <lu.zhongjun@zte.com.cn> Reviewed-by: xu xin <xu.xin16@zte.com.cn> Cc: Yang Yang <yang.yang29@zte.com.cn> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Oscar Salvador [Thu, 16 May 2024 08:10:35 +0000 (10:10 +0200)]
mm/hugetlb: drop node_alloc_noretry from alloc_fresh_hugetlb_folio
Since commit d67e32f26713 ("hugetlb: restructure pool allocations"), the
parameter node_alloc_noretry from alloc_fresh_hugetlb_folio() is not used,
so drop it.
Link: https://lkml.kernel.org/r/20240516081035.5651-1-osalvador@suse.de Signed-off-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com> Reviewed-by: Muchun Song <muchun.song@linux.dev> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Illia Ostapyshyn [Fri, 17 May 2024 09:13:48 +0000 (11:13 +0200)]
mm/vmscan: update stale references to shrink_page_list
Commit 49fd9b6df54e ("mm/vmscan: fix a lot of comments") renamed
shrink_page_list() to shrink_folio_list(). Fix up the remaining
references to the old name in comments and documentation.
Link: https://lkml.kernel.org/r/20240517091348.1185566-1-illia@yshyn.com Signed-off-by: Illia Ostapyshyn <illia@yshyn.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Linus Torvalds [Sun, 30 Jun 2024 21:32:24 +0000 (14:32 -0700)]
Merge tag 'ata-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- Add NOLPM quirk for for all Crucial BX SSD1 models.
Considering that we now have had bug reports for 3 different BX SSD1
variants from Crucial with the same product name, make the quirk more
inclusive, to catch more device models from the same generation.
- Fix a trivial NULL pointer dereference in the error path for
ata_host_release().
- Create a ata_port_free(), so that we don't miss freeing ata_port
struct members when freeing a struct ata_port.
- Fix a trivial double free in the error path for ata_host_alloc().
- Ensure that we remove the libata "remapped NVMe device count" sysfs
entry on .probe() error.
* tag 'ata-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: ahci: Clean up sysfs file on error
ata: libata-core: Fix double free on error
ata,scsi: libata-core: Do not leak memory for ata_port struct members
ata: libata-core: Fix null pointer dereference on error
ata: libata-core: Add ATA_HORKAGE_NOLPM for all Crucial BX SSD1 models
Niklas Cassel [Sat, 29 Jun 2024 12:42:14 +0000 (14:42 +0200)]
ata: ahci: Clean up sysfs file on error
.probe() (ahci_init_one()) calls sysfs_add_file_to_group(), however,
if probe() fails after this call, we currently never call
sysfs_remove_file_from_group().
(The sysfs_remove_file_from_group() call in .remove() (ahci_remove_one())
does not help, as .remove() is not called on .probe() error.)
Thus, if probe() fails after the sysfs_add_file_to_group() call, the next
time we insmod the module we will get:
Niklas Cassel [Sat, 29 Jun 2024 12:42:13 +0000 (14:42 +0200)]
ata: libata-core: Fix double free on error
If e.g. the ata_port_alloc() call in ata_host_alloc() fails, we will jump
to the err_out label, which will call devres_release_group().
devres_release_group() will trigger a call to ata_host_release().
ata_host_release() calls kfree(host), so executing the kfree(host) in
ata_host_alloc() will lead to a double free:
Niklas Cassel [Sat, 29 Jun 2024 12:42:12 +0000 (14:42 +0200)]
ata,scsi: libata-core: Do not leak memory for ata_port struct members
libsas is currently not freeing all the struct ata_port struct members,
e.g. ncq_sense_buf for a driver supporting Command Duration Limits (CDL).
Add a function, ata_port_free(), that is used to free a ata_port,
including its struct members. It makes sense to keep the code related to
freeing a ata_port in its own function, which will also free all the
struct members of struct ata_port.
Do not access ata_port struct members unconditionally.
Fixes: 633273a3ed1c ("libata-pmp: hook PMP support and enable it") Cc: stable@vger.kernel.org Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20240629124210.181537-7-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org>
Linus Torvalds [Sun, 30 Jun 2024 17:00:01 +0000 (10:00 -0700)]
Merge tag 'kbuild-fixes-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Remove the executable bit from installed DTB files
- Escape $ in subshell execution in the debian-orig target
- Fix RPM builds with CONFIG_MODULES=n
- Fix xconfig with the O= option
- Fix scripts_gdb with the O= option
* tag 'kbuild-fixes-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: scripts/gdb: bring the "abspath" back
kbuild: Use $(obj)/%.cc to fix host C++ module builds
kbuild: rpm-pkg: fix build error with CONFIG_MODULES=n
kbuild: Fix build target deb-pkg: ln: failed to create hard link
kbuild: doc: Update default INSTALL_MOD_DIR from extra to updates
kbuild: Install dtb files as 0644 in Makefile.dtbinst
Linus Torvalds [Wed, 26 Jun 2024 00:50:04 +0000 (17:50 -0700)]
x86-32: fix cmpxchg8b_emu build error with clang
The kernel test robot reported that clang no longer compiles the 32-bit
x86 kernel in some configurations due to commit 95ece48165c1
("locking/atomic/x86: Rewrite x86_32 arch_atomic64_{,fetch}_{and,or,xor}()
functions").
The build fails with
arch/x86/include/asm/cmpxchg_32.h:149:9: error: inline assembly requires more registers than available
and the reason seems to be that not only does the cmpxchg8b instruction
need four fixed registers (EDX:EAX and ECX:EBX), with the emulation
fallback the inline asm also wants a fifth fixed register for the
address (it uses %esi for that, but that's just a software convention
with cmpxchg8b_emu).
Avoiding using another pointer input to the asm (and just forcing it to
use the "0(%esi)" addressing that we end up requiring for the sw
fallback) seems to fix the issue.
Linus Torvalds [Sun, 30 Jun 2024 16:11:59 +0000 (09:11 -0700)]
Merge tag 'staging-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are two small staging driver fixes for 6.10-rc6, both for the
vc04_services drivers:
- build fix if CONFIG_DEBUGFS was not set
- initialization check fix that was much reported.
Both of these have been in linux-next this week with no reported
issues"
* tag 'staging-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vchiq_debugfs: Fix build if CONFIG_DEBUG_FS is not set
staging: vc04_services: vchiq_arm: Fix initialisation check
Linus Torvalds [Sun, 30 Jun 2024 15:57:43 +0000 (08:57 -0700)]
Merge tag 'tty-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial / console fixes from Greg KH:
"Here are a bunch of fixes/reverts for 6.10-rc6. Include in here are:
- revert the bunch of tty/serial/console changes that landed in -rc1
that didn't quite work properly yet.
Everyone agreed to just revert them for now and will work on making
them better for a future release instead of trying to quick fix the
existing changes this late in the release cycle
- 8250 driver port count bugfix
- Other tiny serial port bugfixes for reported issues
All of these have been in linux-next this week with no reported
issues"
* tag 'tty-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "printk: Save console options for add_preferred_console_match()"
Revert "printk: Don't try to parse DEVNAME:0.0 console options"
Revert "printk: Flag register_console() if console is set on command line"
Revert "serial: core: Add support for DEVNAME:0.0 style naming for kernel console"
Revert "serial: core: Handle serial console options"
Revert "serial: 8250: Add preferred console in serial8250_isa_init_ports()"
Revert "Documentation: kernel-parameters: Add DEVNAME:0.0 format for serial ports"
Revert "serial: 8250: Fix add preferred console for serial8250_isa_init_ports()"
Revert "serial: core: Fix ifdef for serial base console functions"
serial: bcm63xx-uart: fix tx after conversion to uart_port_tx_limited()
serial: core: introduce uart_port_tx_limited_flags()
Revert "serial: core: only stop transmit when HW fifo is empty"
serial: imx: set receiver level before starting uart
tty: mcf: MCF54418 has 10 UARTS
serial: 8250_omap: Implementation of Errata i2310
tty: serial: 8250: Fix port count mismatch with the device
Linus Torvalds [Sun, 30 Jun 2024 15:41:42 +0000 (08:41 -0700)]
Merge tag 'smp_urgent_for_v6.10_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull smp fixes from Borislav Petkov:
- Fix "nosmp" and "maxcpus=0" after the parallel CPU bringup work went
in and broke them
- Make sure CPU hotplug dynamic prepare states are actually executed
* tag 'smp_urgent_for_v6.10_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Fix broken cmdline "nosmp" and "maxcpus=0"
cpu/hotplug: Fix dynstate assignment in __cpuhp_setup_state_cpuslocked()
Linus Torvalds [Sun, 30 Jun 2024 15:36:13 +0000 (08:36 -0700)]
Merge tag 'irq_urgent_for_v6.10_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Make sure multi-bridge machines get all eiointc interrupt controllers
initialized even if the number of CPUs has been limited by a cmdline
param
- Make sure interrupt lines on liointc hw are configured properly even
when interrupt routing changes
- Avoid use-after-free in the error path of the MSI init code
* tag 'irq_urgent_for_v6.10_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Fix UAF in msi_capability_init
irqchip/loongson-liointc: Set different ISRs for different cores
irqchip/loongson-eiointc: Use early_cpu_to_node() instead of cpu_to_node()
Linus Torvalds [Sun, 30 Jun 2024 15:31:08 +0000 (08:31 -0700)]
Merge tag 'timers_urgent_for_v6.10_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Warn when an hrtimer doesn't get a callback supplied
* tag 'timers_urgent_for_v6.10_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimer: Prevent queuing of hrtimer without a function callback
Linus Torvalds [Sat, 29 Jun 2024 16:21:40 +0000 (09:21 -0700)]
Merge tag 'xfs-6.10-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Chandan Babu:
- Always free only post-EOF delayed allocations for files with the
XFS_DIFLAG_PREALLOC or APPEND flags set.
- Do not align cow fork delalloc to cowextsz hint when running low on
space.
- Allow zero-size symlinks and directories as long as the link count is
zero.
- Change XFS_IOC_EXCHANGE_RANGE to be a _IOW only ioctl. This was ioctl
was introduced during v6.10 developement cycle.
- xfs_init_new_inode() now creates an attribute fork on a newly created
inode even if ATTR feature flag is not enabled.
* tag 'xfs-6.10-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: honor init_xattrs in xfs_init_new_inode for !ATTR fs
xfs: fix direction in XFS_IOC_EXCHANGE_RANGE
xfs: allow unlinked symlinks and dirs with zero size
xfs: restrict when we try to align cow fork delalloc to cowextsz hints
xfs: fix freeing speculative preallocations for preallocated files
Linus Torvalds [Sat, 29 Jun 2024 16:12:53 +0000 (09:12 -0700)]
Merge tag 'i2c-for-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two fixes for the testunit and and a fixup for the code reorganization
of the previous wmt-driver"
* tag 'i2c-for-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: testunit: discard write requests while old command is running
i2c: testunit: don't erase registers after STOP
i2c: viai2c: turn common code into a proper module
- sdhci-brcmstb: Fix support for erase/trim/discard
* tag 'mmc-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci: Do not lock spinlock around mmc_gpio_get_ro()
mmc: sdhci: Do not invert write-protect twice
Revert "mmc: moxart-mmc: Use sg_miter for PIO"
mmc: sdhci-brcmstb: check R1_STATUS for erase/trim/discard
mmc: sdhci-pci-o2micro: Convert PCIBIOS_* return codes to errnos
mmc: sdhci-pci: Convert PCIBIOS_* return codes to errnos
Linus Torvalds [Fri, 28 Jun 2024 23:14:59 +0000 (16:14 -0700)]
Merge tag 'riscv-for-linus-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for vector load/store instruction decoding, which could result
in reserved vector element length encodings decoding as valid vector
instructions.
- Instruction patching now aggressively flushes the local instruction
cache, to avoid situations where patching functions on the flush path
results in torn instructions being fetched.
- A fix to prevent the stack walker from showing up as part of traces.
* tag 'riscv-for-linus-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: stacktrace: convert arch_stack_walk() to noinstr
riscv: patch: Flush the icache right after patching to avoid illegal insns
RISC-V: fix vector insn load/store width mask
Linus Torvalds [Fri, 28 Jun 2024 21:27:22 +0000 (14:27 -0700)]
x86: stop playing stack games in profile_pc()
The 'profile_pc()' function is used for timer-based profiling, which
isn't really all that relevant any more to begin with, but it also ends
up making assumptions based on the stack layout that aren't necessarily
valid.
Basically, the code tries to account the time spent in spinlocks to the
caller rather than the spinlock, and while I support that as a concept,
it's not worth the code complexity or the KASAN warnings when no serious
profiling is done using timers anyway these days.
And the code really does depend on stack layout that is only true in the
simplest of cases. We've lost the comment at some point (I think when
the 32-bit and 64-bit code was unified), but it used to say:
Assume the lock function has either no stack frame or a copy
of eflags from PUSHF.
which explains why it just blindly loads a word or two straight off the
stack pointer and then takes a minimal look at the values to just check
if they might be eflags or the return pc:
Eflags always has bits 22 and up cleared unlike kernel addresses
but that basic stack layout assumption assumes that there isn't any lock
debugging etc going on that would complicate the code and cause a stack
frame.
It causes KASAN unhappiness reported for years by syzkaller [1] and
others [2].
With no real practical reason for this any more, just remove the code.
Just for historical interest, here's some background commits relating to
this code from 2006:
0cb91a229364 ("i386: Account spinlocks to the caller during profiling for !FP kernels") 31679f38d886 ("Simplify profile_pc on x86-64")
Wolfram Sang [Thu, 27 Jun 2024 11:14:48 +0000 (13:14 +0200)]
i2c: testunit: discard write requests while old command is running
When clearing registers on new write requests was added, the protection
for currently running commands was missed leading to concurrent access
to the testunit registers. Check the flag beforehand.
Fixes: b39ab96aa894 ("i2c: testunit: add support for block process calls") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Wolfram Sang [Thu, 27 Jun 2024 11:14:47 +0000 (13:14 +0200)]
i2c: testunit: don't erase registers after STOP
STOP fallsthrough to WRITE_REQUESTED but this became problematic when
clearing the testunit registers was added to the latter. Actually, there
is no reason to clear the testunit state after STOP. Doing it when a new
WRITE_REQUESTED arrives is enough. So, no need to fallthrough, at all.
Fixes: b39ab96aa894 ("i2c: testunit: add support for block process calls") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Wolfram Sang [Fri, 28 Jun 2024 18:38:20 +0000 (20:38 +0200)]
Merge tag 'i2c-host-fixes-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
Fixed a build error following the major refactoring involving the
VIA-I2C modules. Originally, the code was split to group together
parts that would be used by different drivers. This caused build
issues when two modules linked to the same code.
Linus Torvalds [Fri, 28 Jun 2024 16:32:33 +0000 (09:32 -0700)]
Merge tag 'nfsd-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Due to a late review, revert and re-fix a recent crasher fix
* tag 'nfsd-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
Revert "nfsd: fix oops when reading pool_stats before server is started"
nfsd: initialise nfsd_info.mutex early.
Linus Torvalds [Fri, 28 Jun 2024 16:25:21 +0000 (09:25 -0700)]
Merge tag 'bcachefs-2024-06-28' of https://evilpiepirate.org/git/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Simple stuff:
- NULL ptr/err ptr deref fixes
- fix for getting wedged on shutdown after journal error
- fix missing recalc_capacity() call, capacity now changes correctly
after a device goes read only
however: our capacity calculation still doesn't take into account
when we have mixed ro/rw devices and the ro devices have data on
them, that's going to be a more involved fix to separate accounting
for "capacity used on ro devices" and "capacity used on rw devices"
- boring syzbot stuff
Slightly more involved:
- discard, invalidate workers are now per device
this has the effect of simplifying how we take device refs in these
paths, and the device ref cleanup fixes a longstanding race between
the device removal path and the discard path
- fixes for how the debugfs code takes refs on btree_trans objects we
have debugfs code that prints in use btree_trans objects.
It uses closure_get() on trans->ref, which is mainly for the cycle
detector, but the debugfs code was using it on a closure that may
have hit 0, which is not allowed; for performance reasons we cannot
avoid having not-in-use transactions on the global list.
Introduce some new primitives to fix this and make the
synchronization here a whole lot saner"
* tag 'bcachefs-2024-06-28' of https://evilpiepirate.org/git/bcachefs:
bcachefs: Fix kmalloc bug in __snapshot_t_mut
bcachefs: Discard, invalidate workers are now per device
bcachefs: Fix shift-out-of-bounds in bch2_blacklist_entries_gc
bcachefs: slab-use-after-free Read in bch2_sb_errors_from_cpu
bcachefs: Add missing bch2_journal_do_writes() call
bcachefs: Fix null ptr deref in journal_pins_to_text()
bcachefs: Add missing recalc_capacity() call
bcachefs: Fix btree_trans list ordering
bcachefs: Fix race between trans_put() and btree_transactions_read()
closures: closure_get_not_zero(), closure_return_sync()
bcachefs: Make btree_deadlock_to_text() clearer
bcachefs: fix seqmutex_relock()
bcachefs: Fix freeing of error pointers
Linus Torvalds [Fri, 28 Jun 2024 16:21:27 +0000 (09:21 -0700)]
Merge tag 'block-6.10-20240628' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"NVMe fixes via Keith:
- Fabrics fixes (Hannes)
- Missing module description (Jeff)
- Clang warning fix (Nathan)"
* tag 'block-6.10-20240628' of git://git.kernel.dk/linux:
nvmet-fc: Remove __counted_by from nvmet_fc_tgt_queue.fod[]
nvmet: make 'tsas' attribute idempotent for RDMA
nvme: fixup comment for nvme RDMA Provider Type
nvme-apple: add missing MODULE_DESCRIPTION()
nvmet: do not return 'reserved' for empty TSAS values
nvme: fix NVME_NS_DEAC may incorrectly identifying the disk as EXT_LBA.
Linus Torvalds [Fri, 28 Jun 2024 16:18:01 +0000 (09:18 -0700)]
Merge tag 'iommu-fixes-v6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Two cache flushing fixes for Intel and AMD drivers
- AMD guest translation enabling fix
- Update IOMMU tree location in MAINTAINERS file
* tag 'iommu-fixes-v6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
MAINTAINERS: Update IOMMU tree location
iommu/amd: Fix GT feature enablement again
iommu/vt-d: Fix missed device TLB cache tag
iommu/amd: Invalidate cache before removing device from domain list
Linus Torvalds [Fri, 28 Jun 2024 16:15:13 +0000 (09:15 -0700)]
Merge tag 'gpio-fixes-for-v6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"An assortment of driver fixes and two commits addressing a bad
behavior of the GPIO uAPI when reconfiguring requested lines.
- fix a race condition in i2c transfers by adding a missing i2c lock
section in gpio-pca953x
- validate the number of obtained interrupts in gpio-davinci
- add missing raw_spinlock_init() in gpio-graniterapids
- fix bad character device behavior: disallow GPIO line
reconfiguration without set direction both in v1 and v2 uAPI"
* tag 'gpio-fixes-for-v6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: cdev: Ignore reconfiguration without direction
gpiolib: cdev: Disallow reconfiguration without direction (uAPI v1)
gpio: graniterapids: Add missing raw_spinlock_init()
gpio: davinci: Validate the obtained number of IRQs
gpio: pca953x: fix pca953x_irq_bus_sync_unlock race
Linus Torvalds [Fri, 28 Jun 2024 16:10:01 +0000 (09:10 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"A pair of small arm64 fixes for -rc6.
One is a fix for the recently merged uffd-wp support (which was
triggering a spurious warning) and the other is a fix to the clearing
of the initial idmap pgd in some configurations
Summary:
- Fix spurious page-table warning when clearing PTE_UFFD_WP in a live
pte
- Fix clearing of the idmap pgd when using large addressing modes"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Clear the initial ID map correctly before remapping
arm64: mm: Permit PTE SW bits to change in live mappings
Linus Torvalds [Fri, 28 Jun 2024 16:04:33 +0000 (09:04 -0700)]
Merge tag 'v6.10-rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat fixes from Len Brown:
"Fix three recent minor turbostat regressions"
* tag 'v6.10-rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: Add local build_bug.h header for snapshot target
tools/power turbostat: Fix unc freq columns not showing with '-q' or '-l'
tools/power turbostat: option '-n' is ambiguous
Nathan Chancellor [Wed, 29 May 2024 21:29:42 +0000 (14:29 -0700)]
tty: mxser: Remove __counted_by from mxser_board.ports[]
Work for __counted_by on generic pointers in structures (not just
flexible array members) has started landing in Clang 19 (current tip of
tree). During the development of this feature, a restriction was added
to __counted_by to prevent the flexible array member's element type from
including a flexible array member itself such as:
struct foo {
int count;
char buf[];
};
struct bar {
int count;
struct foo data[] __counted_by(count);
};
because the size of data cannot be calculated with the standard array
size formula:
sizeof(struct foo) * count
This restriction was downgraded to a warning but due to CONFIG_WERROR,
it can still break the build. The application of __counted_by on the
ports member of 'struct mxser_board' triggers this restriction,
resulting in:
drivers/tty/mxser.c:291:2: error: 'counted_by' should not be applied to an array with element of unknown size because 'struct mxser_port' is a struct type with a flexible array member. This will be an error in a future compiler version [-Werror,-Wbounds-safety-counted-by-elt-type-unknown-size]
291 | struct mxser_port ports[] __counted_by(nports);
| ^~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Remove this use of __counted_by to fix the warning/error. However,
rather than remove it altogether, leave it commented, as it may be
possible to support this in future compiler releases.
An unintended consequence of commit 9c573cd31343 ("randomize_kstack:
Improve entropy diffusion") was that the per-architecture entropy size
filtering reduced how many bits were being added to the mix, rather than
how many bits were being used during the offsetting. All architectures
fell back to the existing default of 0x3FF (10 bits), which will consume
at most 1KiB of stack space. It seems that this is working just fine,
so let's avoid the confusion and update everything to use the default.
The prior intent of the per-architecture limits were:
arm64: capped at 0x1FF (9 bits), 5 bits effective
powerpc: uncapped (10 bits), 6 or 7 bits effective
riscv: uncapped (10 bits), 6 bits effective
x86: capped at 0xFF (8 bits), 5 (x86_64) or 6 (ia32) bits effective
s390: capped at 0xFF (8 bits), undocumented effective entropy
Current discussion has led to just dropping the original per-architecture
filters. The additional entropy appears to be safe for arm64, x86,
and s390. Quoting Arnd, "There is no point pretending that 15.75KB is
somehow safe to use while 15.00KB is not."
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/string_kunit.o
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/string_helpers_kunit.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Niklas Cassel [Thu, 27 Jun 2024 10:55:52 +0000 (12:55 +0200)]
ata: libata-core: Add ATA_HORKAGE_NOLPM for all Crucial BX SSD1 models
We got another report that CT1000BX500SSD1 does not work with LPM.
If you look in libata-core.c, we have six different Crucial devices that
are marked with ATA_HORKAGE_NOLPM. This model would have been the seventh.
(This quirk is used on Crucial models starting with both CT* and
Crucial_CT*)
It is obvious that this vendor does not have a great history of supporting
LPM properly, therefore, add the ATA_HORKAGE_NOLPM quirk for all Crucial
BX SSD1 models.
Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type") Cc: stable@vger.kernel.org Reported-by: Alessandro Maggio <alex.tkd.alex@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218832 Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20240627105551.4159447-2-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org>
Adam Hawley [Wed, 22 May 2024 13:27:21 +0000 (16:27 +0300)]
tools/power turbostat: Fix unc freq columns not showing with '-q' or '-l'
Commit 78464d7681f7 ("tools/power turbostat: Add columns for clustered
uncore frequency") introduced 'probe_intel_uncore_frequency_cluster()'
in a way which prevents printing uncore frequency columns if either of
the '-q' or '-l' options are used. Systems which do not have multiple
uncore frequencies per package are unaffected by this regression.
Fix the function so that uncore frequency columns are shown when either
the '-l' or '-q' option is used by checking if 'quiet' is true after
adding counters for the uncore frequency columns.
Fixes: 78464d7681f7 ("tools/power turbostat: Add columns for clustered uncore frequency") Signed-off-by: Adam Hawley <adam.james.hawley@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
David Arcari [Mon, 20 May 2024 18:57:49 +0000 (14:57 -0400)]
tools/power turbostat: option '-n' is ambiguous
In some cases specifying the '-n' command line argument will cause
turbostat to fail. For instance 'turbostat -n 1' works fine; however,
'turbostat -n 1 -d' will fail. This is the result of the first call
to getopt_long_only() where "MP" is specified as the optstring. This can
be easily fixed by changing the optstring from "MP" to "MPn:" to remove
ambiguity between the arguments.
tools/power turbostat: option '-n' is ambiguous; possibilities: '-num_iterations' '-no-msr' '-no-perf'
Fixes: a0e86c90b83c ("tools/power turbostat: Add --no-perf option") Signed-off-by: David Arcari <darcari@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
Linus Torvalds [Fri, 28 Jun 2024 00:24:34 +0000 (17:24 -0700)]
Merge tag 'drm-fixes-2024-06-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Regular fixes, mostly amdgpu with some minor fixes in other places,
along with a fix for a very narrow UAF race in the pid handover code.
core:
- fix refcounting race on pid handover
fbdev:
- Fix fb_info when vmalloc is used, regression from
CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM.
i915:
- Fix potential UAF due to race on fence register revocation
nouveau
- nouveau tv mode fixes
panel:
- Add KOE TX26D202VM0BWA timings"
* tag 'drm-fixes-2024-06-28' of https://gitlab.freedesktop.org/drm/kernel:
drm/drm_file: Fix pid refcounting race
drm/nouveau/dispnv04: fix null pointer dereference in nv17_tv_get_ld_modes
drm/nouveau/dispnv04: fix null pointer dereference in nv17_tv_get_hd_modes
drm/amdgpu: Don't show false warning for reg list
drm/amdgpu: avoid using null object of framebuffer
drm/amd/display: Send DP_TOTAL_LTTPR_CNT during detection if LTTPR is present
drm/amdgpu: Fix pci state save during mode-1 reset
drm/amdgpu/atomfirmware: fix parsing of vram_info
drm/amd/swsmu: add MALL init support workaround for smu_v14_0_1
drm/i915/gt: Fix potential UAF by revoke of fence registers
drm/panel: simple: Add missing display timing flags for KOE TX26D202VM0BWA
drm/fbdev-dma: Only set smem_start is enable per module option
Jann Horn [Thu, 27 Jun 2024 01:26:00 +0000 (11:26 +1000)]
drm/drm_file: Fix pid refcounting race
<maarten.lankhorst@linux.intel.com>, Maxime Ripard
<mripard@kernel.org>, Thomas Zimmermann <tzimmermann@suse.de>
filp->pid is supposed to be a refcounted pointer; however, before this
patch, drm_file_update_pid() only increments the refcount of a struct
pid after storing a pointer to it in filp->pid and dropping the
dev->filelist_mutex, making the following race possible:
process A process B
========= =========
begin drm_file_update_pid
mutex_lock(&dev->filelist_mutex)
rcu_replace_pointer(filp->pid, <pid B>, 1)
mutex_unlock(&dev->filelist_mutex)
begin drm_file_update_pid
mutex_lock(&dev->filelist_mutex)
rcu_replace_pointer(filp->pid, <pid A>, 1)
mutex_unlock(&dev->filelist_mutex)
get_pid(<pid A>)
synchronize_rcu()
put_pid(<pid B>) *** pid B reaches refcount 0 and is freed here ***
get_pid(<pid B>) *** UAF ***
synchronize_rcu()
put_pid(<pid A>)
As far as I know, this race can only occur with CONFIG_PREEMPT_RCU=y
because it requires RCU to detect a quiescent state in code that is not
explicitly calling into the scheduler.
This race leads to use-after-free of a "struct pid".
It is probably somewhat hard to hit because process A has to pass
through a synchronize_rcu() operation while process B is between
mutex_unlock() and get_pid().
Fix it by ensuring that by the time a pointer to the current task's pid
is stored in the file, an extra reference to the pid has been taken.
This fix also removes the condition for synchronize_rcu(); I think
that optimization is unnecessary complexity, since in that case we
would usually have bailed out on the lockless check above.
Fixes: 1c7a387ffef8 ("drm: Update file owner during use") Cc: <stable@vger.kernel.org> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Thu, 27 Jun 2024 19:35:30 +0000 (12:35 -0700)]
Merge tag 'pm-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Modify the intel_pstate driver to use HWP to initialize the ITMT
scheduler extension if ACPI CPPC cannot be used for that, which is the
case on some hybrid x86 systems (Rafael Wysocki)"
* tag 'pm-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Use HWP to initialize ITMT if CPPC is missing
Linus Torvalds [Thu, 27 Jun 2024 19:32:56 +0000 (12:32 -0700)]
Merge tag 'thermal-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Replace an earlier fix for a recent regression in the Step-Wise
thermal governor that was not effective in all of the relevant cases
(Rafael Wysocki)"
* tag 'thermal-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: gov_step_wise: Go straight to instance->lower when mitigation is over
Linus Torvalds [Thu, 27 Jun 2024 19:23:52 +0000 (12:23 -0700)]
Merge tag 'io_uring-6.10-20240627' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"Removal of a struct member that's unused since the 6.10 merge window,
and a fix for a regression in SQPOLL wakeups, bringing it back to how
it worked before the SQPOLL local task_work"
* tag 'io_uring-6.10-20240627' of git://git.kernel.dk/linux:
io_uring: signal SQPOLL task_work with TWA_SIGNAL_NO_IPI
io_uring: remove dead struct io_submit_state member
* tag 'nvme-6.10-2024-06-27' of git://git.infradead.org/nvme:
nvmet-fc: Remove __counted_by from nvmet_fc_tgt_queue.fod[]
nvmet: make 'tsas' attribute idempotent for RDMA
nvme: fixup comment for nvme RDMA Provider Type
nvme-apple: add missing MODULE_DESCRIPTION()
nvmet: do not return 'reserved' for empty TSAS values
nvme: fix NVME_NS_DEAC may incorrectly identifying the disk as EXT_LBA.
Linus Torvalds [Thu, 27 Jun 2024 18:09:03 +0000 (11:09 -0700)]
Merge tag 's390-6.10-7' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Add missing virt_to_phys() conversion for directed interrupt bit
vectors
- Fix broken configuration change notifications for virtio-ccw
- Fix sclp_init() cleanup path on failure and as result - fix a list
double add warning
- Fix unconditional adjusting of GOT entries containing undefined weak
symbols that resolve to zero
* tag 's390-6.10-7' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/boot: Do not adjust GOT entries for undef weak sym
s390/sclp: Fix sclp_init() cleanup on failure
s390/virtio_ccw: Fix config change notifications
s390/pci: Add missing virt_to_phys() for directed DIBV
Linus Torvalds [Thu, 27 Jun 2024 17:53:52 +0000 (10:53 -0700)]
Merge tag 'asm-generic-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"These are some bugfixes for system call ABI issues I found while
working on a cleanup series. None of these are urgent since these bugs
have gone unnoticed for many years, but I think we probably want to
backport them all to stable kernels, so it makes sense to have the
fixes included as early as possible.
One more fix addresses a compile-time warning in kallsyms that was
uncovered by a patch I did to enable additional warnings in 6.10. I
had mistakenly thought that this fix was already merged through the
module tree, but as Geert pointed out it was still missing"
* tag 'asm-generic-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
kallsyms: rework symbol lookup return codes
linux/syscalls.h: add missing __user annotations
syscalls: mmap(): use unsigned offset type consistently
s390: remove native mmap2() syscall
hexagon: fix fadvise64_64 calling conventions
csky, hexagon: fix broken sys_sync_file_range
sh: rework sync_file_range ABI
powerpc: restore some missing spu syscalls
parisc: use generic sys_fanotify_mark implementation
parisc: use correct compat recv/recvfrom syscalls
sparc: fix compat recv/recvfrom syscalls
sparc: fix old compat_sys_select()
syscalls: fix compat_sys_io_pgetevents_time64 usage
ftruncate: pass a signed offset
Linus Torvalds [Thu, 27 Jun 2024 17:26:16 +0000 (10:26 -0700)]
Merge tag 'for-6.10-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix quota root leak after quota disable failure
- fix condition when checking if a zone can be added as free
- allocate inode in NOFS context during logging or tree-log replay
- handle raid-stripe-tree lookup correctly during scrub
* tag 'for-6.10-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: qgroup: fix quota root leak after quota disable failure
btrfs: scrub: handle RST lookup error correctly
btrfs: zoned: fix initial free space detection
btrfs: use NOFS context when getting inodes during logging and log replay
Linus Torvalds [Thu, 27 Jun 2024 17:05:35 +0000 (10:05 -0700)]
Merge tag 'net-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, bpf and netfilter.
There are a bunch of regressions addressed here, but hopefully nothing
spectacular. We are still waiting the driver fix from Intel, mentioned
by Jakub in the previous networking pull.
Current release - regressions:
- core: add softirq safety to netdev_rename_lock
- tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed
TFO
- batman-adv: fix RCU race at module unload time
Previous releases - regressions:
- openvswitch: get related ct labels from its master if it is not
confirmed
- eth: mlxsw: fix memory corruptions on spectrum-4 systems
- eth: ionic: use dev_consume_skb_any outside of napi
Previous releases - always broken:
- netfilter: fully validate NFT_DATA_VALUE on store to data registers
- unix: several fixes for OoB data
- tcp: fix race for duplicate reqsk on identical SYN
- bpf:
- fix may_goto with negative offset
- fix the corner case with may_goto and jump to the 1st insn
- fix overrunning reservations in ringbuf
- can:
- j1939: recover socket queue on CAN bus error during BAM
transmission
- mcp251xfd: fix infinite loop when xmit fails
- dsa: microchip: monitor potential faults in half-duplex mode
- eth: vxlan: pull inner IP header in vxlan_xmit_one()
- eth: ionic: fix kernel panic due to multi-buffer handling
Misc:
- selftest: unix tests refactor and a lot of new cases added"
* tag 'net-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
net: mana: Fix possible double free in error handling path
selftest: af_unix: Check SIOCATMARK after every send()/recv() in msg_oob.c.
af_unix: Fix wrong ioctl(SIOCATMARK) when consumed OOB skb is at the head.
selftest: af_unix: Check EPOLLPRI after every send()/recv() in msg_oob.c
selftest: af_unix: Check SIGURG after every send() in msg_oob.c
selftest: af_unix: Add SO_OOBINLINE test cases in msg_oob.c
af_unix: Don't stop recv() at consumed ex-OOB skb.
selftest: af_unix: Add non-TCP-compliant test cases in msg_oob.c.
af_unix: Don't stop recv(MSG_DONTWAIT) if consumed OOB skb is at the head.
af_unix: Stop recv(MSG_PEEK) at consumed OOB skb.
selftest: af_unix: Add msg_oob.c.
selftest: af_unix: Remove test_unix_oob.c.
tracing/net_sched: NULL pointer dereference in perf_trace_qdisc_reset()
netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers
net: usb: qmi_wwan: add Telit FN912 compositions
tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed TFO
ionic: use dev_consume_skb_any outside of napi
net: dsa: microchip: fix wrong register write when masking interrupt
Fix race for duplicate reqsk on identical SYN
ibmvnic: Add tx check to prevent skb leak
...
Linus Torvalds [Thu, 27 Jun 2024 16:34:09 +0000 (09:34 -0700)]
Merge tag 'sound-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This became bigger than usual, as it receives a pile of pending ASoC
fixes. Most of changes are for device-specific issues while there are
a few core fixes that are all rather trivial:
- DMA-engine sync fixes
- Continued MIDI2 conversion fixes
- Various ASoC Intel SOF fixes
- A series of ASoC topology fixes for memory handling
- AMD ACP fix, curing a recent regression, too
- Platform / codec-specific fixes for mediatek, atmel, realtek, etc"
* tag 'sound-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (40 commits)
ASoC: rt5645: fix issue of random interrupt from push-button
ALSA: seq: Fix missing MSB in MIDI2 SPP conversion
ASoC: amd: yc: Fix non-functional mic on ASUS M5602RA
ALSA: hda/realtek: fix mute/micmute LEDs don't work for EliteBook 645/665 G11.
ALSA: hda/realtek: Fix conflicting quirk for PCI SSID 17aa:3820
ALSA: dmaengine_pcm: terminate dmaengine before synchronize
ALSA: hda/relatek: Enable Mute LED on HP Laptop 15-gw0xxx
ALSA: PCM: Allow resume only for suspended streams
ALSA: seq: Fix missing channel at encoding RPN/NRPN MIDI2 messages
ASoC: mediatek: mt8195: Add platform entry for ETDM1_OUT_BE dai link
ASoC: fsl-asoc-card: set priv->pdev before using it
ASoC: amd: acp: move chip->flag variable assignment
ASoC: amd: acp: remove i2s configuration check in acp_i2s_probe()
ASoC: amd: acp: add a null check for chip_pdev structure
ASoC: Intel: soc-acpi: mtl: fix speaker no sound on Dell SKU 0C64
ASoC: q6apm-lpass-dai: close graph on prepare errors
ASoC: cs35l56: Disconnect ASP1 TX sources when ASP1 DAI is hooked up
ASoC: topology: Fix route memory corruption
ASoC: rt722-sdca-sdw: add debounce time for type detection
ASoC: SOF: sof-audio: Skip unprepare for in-use widgets on error rollback
...
Building with W=1 in some configurations produces a false positive
warning for kallsyms:
kernel/kallsyms.c: In function '__sprint_symbol.isra':
kernel/kallsyms.c:503:17: error: 'strcpy' source argument is the same as destination [-Werror=restrict]
503 | strcpy(buffer, name);
| ^~~~~~~~~~~~~~~~~~~~
This originally showed up while building with -O3, but later started
happening in other configurations as well, depending on inlining
decisions. The underlying issue is that the local 'name' variable is
always initialized to the be the same as 'buffer' in the called functions
that fill the buffer, which gcc notices while inlining, though it could
see that the address check always skips the copy.
The calling conventions here are rather unusual, as all of the internal
lookup functions (bpf_address_lookup, ftrace_mod_address_lookup,
ftrace_func_address_lookup, module_address_lookup and
kallsyms_lookup_buildid) already use the provided buffer and either return
the address of that buffer to indicate success, or NULL for failure,
but the callers are written to also expect an arbitrary other buffer
to be returned.
Rework the calling conventions to return the length of the filled buffer
instead of its address, which is simpler and easier to follow as well
as avoiding the warning. Leave only the kallsyms_lookup() calling conventions
unchanged, since that is called from 16 different functions and
adapting this would be a much bigger change.
Kent Gibson [Wed, 26 Jun 2024 05:29:23 +0000 (13:29 +0800)]
gpiolib: cdev: Ignore reconfiguration without direction
linereq_set_config() behaves badly when direction is not set.
The configuration validation is borrowed from linereq_create(), where,
to verify the intent of the user, the direction must be set to in order to
effect a change to the electrical configuration of a line. But, when
applied to reconfiguration, that validation does not allow for the unset
direction case, making it possible to clear flags set previously without
specifying the line direction.
Adding to the inconsistency, those changes are not immediately applied by
linereq_set_config(), but will take effect when the line value is next get
or set.
For example, by requesting a configuration with no flags set, an output
line with GPIO_V2_LINE_FLAG_ACTIVE_LOW and GPIO_V2_LINE_FLAG_OPEN_DRAIN
set could have those flags cleared, inverting the sense of the line and
changing the line drive to push-pull on the next line value set.
Skip the reconfiguration of lines for which the direction is not set, and
only reconfigure the lines for which direction is set.
Kent Gibson [Wed, 26 Jun 2024 05:29:22 +0000 (13:29 +0800)]
gpiolib: cdev: Disallow reconfiguration without direction (uAPI v1)
linehandle_set_config() behaves badly when direction is not set.
The configuration validation is borrowed from linehandle_create(), where,
to verify the intent of the user, the direction must be set to in order
to effect a change to the electrical configuration of a line. But, when
applied to reconfiguration, that validation does not allow for the unset
direction case, making it possible to clear flags set previously without
specifying the line direction.
Adding to the inconsistency, those changes are not immediately applied by
linehandle_set_config(), but will take effect when the line value is next
get or set.
For example, by requesting a configuration with no flags set, an output
line with GPIOHANDLE_REQUEST_ACTIVE_LOW and GPIOHANDLE_REQUEST_OPEN_DRAIN
requested could have those flags cleared, inverting the sense of the line
and changing the line drive to push-pull on the next line value set.
Ensure the intent of the user by disallowing configurations which do not
have direction set, returning an error to userspace to indicate that the
configuration is invalid.
And, for clarity, use lflags, a local copy of gcnf.flags, throughout when
dealing with the requested flags, rather than a mixture of both.
Jos Wang [Wed, 19 Jun 2024 11:45:29 +0000 (19:45 +0800)]
usb: dwc3: core: Workaround for CSR read timeout
This is a workaround for STAR 4846132, which only affects
DWC_usb31 version2.00a operating in host mode.
There is a problem in DWC_usb31 version 2.00a operating
in host mode that would cause a CSR read timeout When CSR
read coincides with RAM Clock Gating Entry. By disable
Clock Gating, sacrificing power consumption for normal
operation.
Cc: stable <stable@kernel.org> # 5.10.x: 1e43c86d: usb: dwc3: core: Add DWC31 version 2.00a controller Signed-off-by: Jos Wang <joswang@lenovo.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240619114529.3441-1-joswang1221@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit breaks u_ether on some setups (at least Merrifield). The fix
"usb: gadget: u_ether: Re-attach netif device to mirror detachment" party
restores u-ether. However the netif usb: remains up even usb is switched
from device to host mode. This creates problems for user space as the
interface remains in the routing table while not realy present and network
managers (connman) not detecting a network change.
Various attempts to find the root cause were unsuccesful up to now. Therefore
revert until a solution is found.
Bernhard Rosenkränzer [Thu, 27 Jun 2024 12:44:19 +0000 (14:44 +0200)]
staging: vchiq_debugfs: Fix build if CONFIG_DEBUG_FS is not set
Commit 42a2f6664e18 ("staging: vc04_services: Move global g_state to
vchiq_state") adds a parameter to vchiq_debugfs_init, but leaves the
dummy implementation in the !CONFIG_DEBUG_FS case untouched, causing a
compile time error.
Fixes: c3552ab19aeb ("staging: vchiq_debugfs: Fix NPD in vchiq_dump_state") Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com> Reviewed-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20240627124419.2498642-1-bero@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Abeni [Thu, 27 Jun 2024 11:00:50 +0000 (13:00 +0200)]
Merge tag 'nf-24-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains two Netfilter fixes for net:
Patch #1 fixes CONFIG_SYSCTL=n for a patch coming in the previous PR
to move the sysctl toggle to enable SRv6 netfilter hooks from
nf_conntrack to the core, from Jianguo Wu.
Patch #2 fixes a possible pointer leak to userspace due to insufficient
validation of NFT_DATA_VALUE.
Linus found this pointer leak to userspace via zdi-disclosures@ and
forwarded the notice to Netfilter maintainers, he appears as reporter
because whoever found this issue never approached Netfilter
maintainers neither via security@ nor in private.
netfilter pull request 24-06-27
* tag 'nf-24-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers
netfilter: fix undefined reference to 'netfilter_lwtunnel_*' when CONFIG_SYSCTL=n
====================
Ma Ke [Tue, 25 Jun 2024 13:03:14 +0000 (21:03 +0800)]
net: mana: Fix possible double free in error handling path
When auxiliary_device_add() returns error and then calls
auxiliary_device_uninit(), callback function adev_release
calls kfree(madev). We shouldn't call kfree(madev) again
in the error handling path. Set 'madev' to NULL.
Vasant Hegde [Fri, 21 Jun 2024 10:15:33 +0000 (10:15 +0000)]
iommu/amd: Fix GT feature enablement again
Current code configures GCR3 even when device is attached to identity
domain. So that we can support SVA with identity domain. This means in
attach device path it updates Guest Translation related bits in DTE.
Commit de111f6b4f6a ("iommu/amd: Enable Guest Translation after reading
IOMMU feature register") missed to enable Control[GT] bit in resume
path. Its causing certain laptop to fail to resume after suspend.
This is because we have inconsistency between between control register
(GT is disabled) and DTE (where we have enabled guest translation related
bits) in resume path. And IOMMU hardware throws ILLEGAL_DEV_TABLE_ENTRY.
projects / nvme.git / log