MAINTAINERS: Move the BFQ io scheduler to Odd Fixes state
BFQ has been lacking active maintenance for approximately two years, and it
was recently transitioned to the Orphan state. However, there are still
many users, I have decided to step forward and assume the role of
maintainer to ensure continued support and development.
While I may not be the one with the most extensive knowledge of BFQ's
internals, I have been actively involved in its development since 2021.
Moreover, our team continues to rigorously test BFQ in downstream kernels,
ensuring it's stability and performance. Despite my confidence to maintain
BFQ, I believe it is prudent to classify its state as "Odd Fixes" to
accurately reflect my relatively new position as the maintainer.
By assuming this responsibility, I am committed to providing the necessary
support and addressing any issues that may arise with BFQ. As time
progresses, we will reassess the situation and determine the appropriate
state.
Depending on if array has personality, it is either reported as active or
inactive. This patch adds third status "broken" for arrays with
personality that became inoperative. The reason is end users tend to
assume that "active" indicates array is operational.
Add "broken" state for inoperative arrays with personality and refactor
the code.
MAINTAINERS: move the BFQ io scheduler to orphan state
Nobody is maintaining this code, and it just falls under the umbrella
of block layer code. But at least mark it as such, in case anyone wants
to care more deeply about it and assume the responsibility of doing so.
Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
block, bfq: don't break merge chain in bfq_split_bfqq()
Consider the following scenario:
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
Λ | | |
\-------------\ \-------------\ \--------------\|
V V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 1 2 4
If Process 1 issue a new IO and bfqq2 is found, and then bfq_init_rq()
decide to spilt bfqq2 by bfq_split_bfqq(). Howerver, procress reference
of bfqq2 is 1 and bfq_split_bfqq() just clear the coop flag, which will
break the merge chain.
Expected result: caller will allocate a new bfqq for BIC1
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
| | |
\-------------\ \--------------\|
V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 0 1 3
Since the condition is only used for the last bfqq4 when the previous
bfqq2 and bfqq3 are already splited. Fix the problem by checking if
bfqq is the last one in the merge chain as well.
block, bfq: choose the last bfqq from merge chain in bfq_setup_cooperator()
Consider the following merge chain:
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
Λ | | |
\--------------\ \-------------\ \-------------\|
V V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
IO from Process 1 will get bfqf2 from BIC1 first, then
bfq_setup_cooperator() will found bfqq2 already merged to bfqq3 and then
handle this IO from bfqq3. However, the merge chain can be much deeper
and bfqq3 can be merged to other bfqq as well.
Fix this problem by iterating to the last bfqq in
bfq_setup_cooperator().
block, bfq: fix possible UAF for bfqq->bic with merge chain
1) initial state, three tasks:
Process 1 Process 2 Process 3
(BIC1) (BIC2) (BIC3)
| Λ | Λ | Λ
| | | | | |
V | V | V |
bfqq1 bfqq2 bfqq3
process ref: 1 1 1
2) bfqq1 merged to bfqq2:
Process 1 Process 2 Process 3
(BIC1) (BIC2) (BIC3)
| | | Λ
\--------------\| | |
V V |
bfqq1--------->bfqq2 bfqq3
process ref: 0 2 1
3) bfqq2 merged to bfqq3:
Process 1 Process 2 Process 3
(BIC1) (BIC2) (BIC3)
here -> Λ | |
\--------------\ \-------------\|
V V
bfqq1--------->bfqq2---------->bfqq3
process ref: 0 1 3
In this case, IO from Process 1 will get bfqq2 from BIC1 first, and then
get bfqq3 through merge chain, and finially handle IO by bfqq3.
Howerver, current code will think bfqq2 is owned by BIC1, like initial
state, and set bfqq2->bic to BIC1.
bfq_insert_request
-> by Process 1
bfqq = bfq_init_rq(rq)
bfqq = bfq_get_bfqq_handle_split
bfqq = bic_to_bfqq
-> get bfqq2 from BIC1
bfqq->ref++
rq->elv.priv[0] = bic
rq->elv.priv[1] = bfqq
if (bfqq_process_refs(bfqq) == 1)
bfqq->bic = bic
-> record BIC1 to bfqq2
__bfq_insert_request
new_bfqq = bfq_setup_cooperator
-> get bfqq3 from bfqq2->new_bfqq
bfqq_request_freed(bfqq)
new_bfqq->ref++
rq->elv.priv[1] = new_bfqq
-> handle IO by bfqq3
Fix the problem by checking bfqq is from merge chain fist. And this
might fix a following problem reported by our syzkaller(unreproducible):
==================================================================
BUG: KASAN: slab-use-after-free in bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline]
BUG: KASAN: slab-use-after-free in bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline]
BUG: KASAN: slab-use-after-free in bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889
Write of size 1 at addr ffff888123839eb8 by task kworker/0:1H/18595
Second to last potentially related work creation:
kasan_save_stack+0x20/0x40 mm/kasan/common.c:45
__kasan_record_aux_stack+0xaf/0xc0 mm/kasan/generic.c:492
__call_rcu_common kernel/rcu/tree.c:2712 [inline]
call_rcu+0xce/0x1020 kernel/rcu/tree.c:2826
ioc_destroy_icq+0x54c/0x830 block/blk-ioc.c:105
ioc_release_fn+0xf0/0x360 block/blk-ioc.c:124
process_one_work kernel/workqueue.c:2627 [inline]
process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700
worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781
kthread+0x33c/0x440 kernel/kthread.c:388
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305
The buggy address belongs to the object at ffff888123839d68
which belongs to the cache bfq_io_cq of size 1360
The buggy address is located 336 bytes inside of
freed 1360-byte region [ffff888123839d68, ffff88812383a2b8)
Ming Lei [Fri, 30 Aug 2024 03:41:45 +0000 (11:41 +0800)]
nbd: fix race between timeout and normal completion
If request timetout is handled by nbd_requeue_cmd(), normal completion
has to be stopped for avoiding to complete this requeued request, other
use-after-free can be triggered.
Fix the race by clearing NBD_CMD_INFLIGHT in nbd_requeue_cmd(), meantime
make sure that cmd->lock is grabbed for clearing the flag and the
requeue.
Cc: Josef Bacik <josef@toxicpanda.com> Cc: Yu Kuai <yukuai3@huawei.com> Fixes: 2895f1831e91 ("nbd: don't clear 'NBD_CMD_INFLIGHT' flag if request is not completed") Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20240830034145.1827742-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Thu, 29 Aug 2024 19:37:43 +0000 (13:37 -0600)]
Merge tag 'md-6.12-20240829' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.12/block
Pull MD updates from Song:
"Major changes in this set are:
1. md-bitmap refactoring, by Yu Kuai;
2. raid5 performance optimization, by Artur Paszkiewicz;
3. Other small fixes, by Yu Kuai and Chen Ni."
* tag 'md-6.12-20240829' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: (49 commits)
md/raid5: rename wait_for_overlap to wait_for_reshape
md/raid5: only add to wq if reshape is in progress
md/raid5: use wait_on_bit() for R5_Overlap
md: Remove flush handling
md/md-bitmap: make in memory structure internal
md/md-bitmap: merge md_bitmap_enabled() into bitmap_operations
md/md-bitmap: merge md_bitmap_wait_behind_writes() into bitmap_operations
md/md-bitmap: merge md_bitmap_free() into bitmap_operations
md/md-bitmap: merge md_bitmap_set_pages() into struct bitmap_operations
md/md-bitmap: merge md_bitmap_copy_from_slot() into struct bitmap_operation.
md/md-bitmap: merge get_bitmap_from_slot() into bitmap_operations
md/md-bitmap: merge md_bitmap_resize() into bitmap_operations
md/md-bitmap: pass in mddev directly for md_bitmap_resize()
md/md-bitmap: merge md_bitmap_daemon_work() into bitmap_operations
md/md-bitmap: merge bitmap_unplug() into bitmap_operations
md/md-bitmap: merge md_bitmap_unplug_async() into md_bitmap_unplug()
md/md-bitmap: merge md_bitmap_sync_with_cluster() into bitmap_operations
md/md-bitmap: merge md_bitmap_cond_end_sync() into bitmap_operations
md/md-bitmap: merge md_bitmap_close_sync() into bitmap_operations
md/md-bitmap: merge md_bitmap_end_sync() into bitmap_operations
...
Song Liu [Thu, 29 Aug 2024 18:22:13 +0000 (11:22 -0700)]
Merge branch 'md-6.12-raid5-opt' into md-6.12
From Artur:
The wait_for_overlap wait queue is currently used in two cases, which
are not really related:
- waiting for actual overlapping bios, which uses R5_Overlap bit,
- waiting for events related to reshape.
Handling every write request in raid5_make_request() involves adding to
and removing from this wait queue, which uses a spinlock. With fast
storage and multiple submitting threads the contention on this lock is
noticeable.
This patch series aims to resolve this by separating the two cases
mentioned above and using this wait queue only when reshape is in
progress.
The results when testing 4k random writes on raid5 with null_blk
(8 jobs, qd=64, group_thread_cnt=8):
before: 463k IOPS
after: 523k IOPS
The improvement is not huge with this series alone but it is just one of
the bottlenecks. When applied onto some other changes I'm working on, it
allowed to go from 845k IOPS to 975k IOPS on the same test.
* md-6.12-raid5-opt:
md/raid5: rename wait_for_overlap to wait_for_reshape
md/raid5: only add to wq if reshape is in progress
md/raid5: use wait_on_bit() for R5_Overlap
Artur Paszkiewicz [Tue, 27 Aug 2024 15:35:35 +0000 (17:35 +0200)]
md/raid5: only add to wq if reshape is in progress
Now that actual overlaps are not handled on the wait_for_overlap wq
anymore, the remaining cases when we wait on this wq are limited to
reshape. If reshape is not in progress, don't add to the wq in
raid5_make_request() because add_wait_queue() / remove_wait_queue()
operations take a spinlock and cause noticeable contention when multiple
threads are submitting requests to the mddev.
Christoph Hellwig [Mon, 26 Aug 2024 17:37:57 +0000 (19:37 +0200)]
block: don't use bio_split_rw on misc operations
bio_split_rw is designed to split read and write bios with a payload.
Currently it is called by __bio_split_to_limits for all operations not
explicitly list, which works because bio_may_need_split explicitly checks
for bi_vcnt == 1 and thus skips the bypass if there is no payload and
bio_for_each_bvec loop will never execute it's body if bi_size is 0.
But all this is hard to understand, fragile and wasted pointless cycles.
Switch __bio_split_to_limits to only call bio_split_rw for READ and
WRITE command and don't attempt any kind split for operation that do not
require splitting.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Tested-by: Hans Holmberg <hans.holmberg@wdc.com> Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com> Link: https://lore.kernel.org/r/20240826173820.1690925-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Mon, 26 Aug 2024 17:37:56 +0000 (19:37 +0200)]
block: properly handle REQ_OP_ZONE_APPEND in __bio_split_to_limits
Currently REQ_OP_ZONE_APPEND is handled by the bio_split_rw case in
__bio_split_to_limits. This is harmful because REQ_OP_ZONE_APPEND
bios do not adhere to the soft max_limits value but instead use their
own capped version of max_hw_sectors, leading to incorrect splits that
later blow up in bio_split.
We still need the bio_split_rw logic to count nr_segs for blk-mq code,
so add a new wrapper that passes in the right limit, and turns any bio
that would need a split into an error as an additional debugging aid.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Tested-by: Hans Holmberg <hans.holmberg@wdc.com> Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com> Link: https://lore.kernel.org/r/20240826173820.1690925-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Mon, 26 Aug 2024 17:37:55 +0000 (19:37 +0200)]
block: constify the lim argument to queue_limits_max_zone_append_sectors
queue_limits_max_zone_append_sectors doesn't change the lim argument,
so mark it as const.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Tested-by: Hans Holmberg <hans.holmberg@wdc.com> Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com> Link: https://lore.kernel.org/r/20240826173820.1690925-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Mon, 26 Aug 2024 17:37:54 +0000 (19:37 +0200)]
block: rework bio splitting
The current setup with bio_may_exceed_limit and __bio_split_to_limits
is a bit of a mess.
Change it so that __bio_split_to_limits does all the work and is just
a variant of bio_split_to_limits that returns nr_segs. This is done
by inlining it and instead have the various bio_split_* helpers directly
submit the potentially split bios.
To support btrfs, the rw version has a lower level helper split out
that just returns the offset to split. This turns out to nicely clean
up the btrfs flow as well.
Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: David Sterba <dsterba@suse.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Tested-by: Hans Holmberg <hans.holmberg@wdc.com> Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com> Link: https://lore.kernel.org/r/20240826173820.1690925-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
Song Liu [Wed, 28 Aug 2024 21:55:57 +0000 (14:55 -0700)]
Merge branch 'md-6.12-bitmap' into md-6.12
From Yu Kuai (with minor changes by Song Liu):
The background is that currently bitmap is using a global spin_lock,
causing lock contention and huge IO performance degradation for all raid
levels.
However, it's impossible to implement a new lock free bitmap with
current situation that md-bitmap exposes the internal implementation
with lots of exported apis. Hence bitmap_operations is invented, to
describe bitmap core implementation, and a new bitmap can be introduced
with a new bitmap_operations, we only need to switch to the new one
during initialization.
And with this we can build bitmap as kernel module, but that's not
our concern for now.
This version was tested with mdadm tests and lvm2 tests. This set does
not introduce new errors in these tests.
* md-6.12-bitmap: (42 commits)
md/md-bitmap: make in memory structure internal
md/md-bitmap: merge md_bitmap_enabled() into bitmap_operations
md/md-bitmap: merge md_bitmap_wait_behind_writes() into bitmap_operations
md/md-bitmap: merge md_bitmap_free() into bitmap_operations
md/md-bitmap: merge md_bitmap_set_pages() into struct bitmap_operations
md/md-bitmap: merge md_bitmap_copy_from_slot() into struct bitmap_operation.
md/md-bitmap: merge get_bitmap_from_slot() into bitmap_operations
md/md-bitmap: merge md_bitmap_resize() into bitmap_operations
md/md-bitmap: pass in mddev directly for md_bitmap_resize()
md/md-bitmap: merge md_bitmap_daemon_work() into bitmap_operations
md/md-bitmap: merge bitmap_unplug() into bitmap_operations
md/md-bitmap: merge md_bitmap_unplug_async() into md_bitmap_unplug()
md/md-bitmap: merge md_bitmap_sync_with_cluster() into bitmap_operations
md/md-bitmap: merge md_bitmap_cond_end_sync() into bitmap_operations
md/md-bitmap: merge md_bitmap_close_sync() into bitmap_operations
md/md-bitmap: merge md_bitmap_end_sync() into bitmap_operations
md/md-bitmap: remove the parameter 'aborted' for md_bitmap_end_sync()
md/md-bitmap: merge md_bitmap_start_sync() into bitmap_operations
md/md-bitmap: merge md_bitmap_endwrite() into bitmap_operations
md/md-bitmap: merge md_bitmap_startwrite() into bitmap_operations
...
Md Haris Iqbal [Fri, 9 Aug 2024 13:53:46 +0000 (15:53 +0200)]
block/rnbd-srv: Add sanity check and remove redundant assignment
The bio->bi_iter.bi_size is updated when bio_add_page() is called. So we
do not need to assign msg->bi_size again to it, since its redudant and
can also be harmful. Instead we can use it to add a sanity check, which
checks the locally calculated bi_size, with the one sent in msg.
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com> Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com> Link: https://lore.kernel.org/r/20240809135346.978320-1-haris.iqbal@ionos.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Yu Kuai [Tue, 27 Aug 2024 11:06:16 +0000 (19:06 +0800)]
md: Remove flush handling
For flush request, md has a special flush handling to merge concurrent
flush request into single one, however, the whole mechanism is based on
a disk level spin_lock 'mddev->lock'. And fsync can be called quite
often in some user cases, for consequence, spin lock from IO fast path can
cause performance degradation.
Fortunately, the block layer already has flush handling to merge
concurrent flush request, and it only acquires hctx level spin lock. (see
details in blk-flush.c)
This patch removes the flush handling in md, and converts to use general
block layer flush handling in underlying disks.
Flush test for 4 nvme raid10:
start 128 threads to do fsync 100000 times, on arm64, see how long it
takes.
Test script:
void* thread_func(void* arg) {
int fd = *(int*)arg;
for (int i = 0; i < FSYNC_COUNT; i++) {
fsync(fd);
}
return NULL;
}
int main() {
int fd = open("/dev/md0", O_RDWR);
if (fd < 0) {
perror("open");
exit(1);
}
Yu Kuai [Mon, 26 Aug 2024 07:44:52 +0000 (15:44 +0800)]
md/md-bitmap: make in memory structure internal
Now that struct bitmap_page and bitmap is not used externally anymore,
move them from md-bitmap.h to md-bitmap.c (expect that dm-raid is still
using define marco 'COUNTER_MAX').
Yu Kuai [Mon, 26 Aug 2024 07:44:44 +0000 (15:44 +0800)]
md/md-bitmap: pass in mddev directly for md_bitmap_resize()
And move the condition "if (mddev->bitmap)" into md_bitmap_resize() as
well, on the one hand make code cleaner, on the other hand try not to
access bitmap directly.
Since we are here, also change the parameter 'init' from int to bool.
Yu Kuai [Mon, 26 Aug 2024 07:44:41 +0000 (15:44 +0800)]
md/md-bitmap: merge md_bitmap_unplug_async() into md_bitmap_unplug()
Add a parameter 'bool sync' to distinguish them, and
md_bitmap_unplug_async() won't be exported anymore, hence
bitmap_operations only need one op to cover them.
Yu Kuai [Mon, 26 Aug 2024 07:44:34 +0000 (15:44 +0800)]
md/md-bitmap: merge md_bitmap_endwrite() into bitmap_operations
So that the implementation won't be exposed, and it'll be possible
to invent a new bitmap by replacing bitmap_operations.
Also change the parameter from bitmap to mddev, to avoid access
bitmap outside md-bitmap.c as much as possible. And change the type
of 'success' and 'behind' from int to bool.
Yu Kuai [Mon, 26 Aug 2024 07:44:33 +0000 (15:44 +0800)]
md/md-bitmap: merge md_bitmap_startwrite() into bitmap_operations
So that the implementation won't be exposed, and it'll be possible
to invent a new bitmap by replacing bitmap_operations.
Also change the parameter from bitmap to mddev, to avoid access
bitmap outside md-bitmap.c as much as possible. And change the type
of 'behind' from int to bool.
Other than internal api get_bitmap_from_slot(), all other places will
set returned bitmap to mddev->bitmap. So move the setting of
mddev->bitmap into md_bitmap_create() to simplify code.
Yu Kuai [Mon, 26 Aug 2024 07:44:11 +0000 (15:44 +0800)]
md/raid1: use md_bitmap_wait_behind_writes() in raid1_read_request()
Use the existed helper instead of open coding it to make the code cleaner.
There are no functional changes, and also avoid dereferencing bitmap
directly to prepare inventing a new bitmap.
Noted that this patch also export md_bitmap_wait_behind_writes(), which
is necessary for now, and the exported api will be removed in following
patches to convert bitmap apis into ops.
Yu Kuai [Thu, 1 Aug 2024 13:30:08 +0000 (21:30 +0800)]
md/raid1: Clean up local variable 'b' from raid1_read_request()
The local variable will only be used onced, in the error path that
read_balance() failed to find a valid rdev to read. Since now the rdev
is ensured can't be removed from conf while IO is still pending,
remove the local variable and dereference rdev directly.
Since we're here, also remove an extra empty line, and unnecessary
type conversion from sector_t(u64) to unsigned long long.
Yu Kuai [Thu, 1 Aug 2024 12:47:46 +0000 (20:47 +0800)]
md: Don't flush sync_work in md_write_start()
Because flush sync_work may trigger mddev_suspend() if there are spares,
and this should never be done in IO path because mddev_suspend() is used
to wait for IO.
Remove the debugfs_create_dir() error check. It's safe to pass in error
pointers to the debugfs API, hence the user isn't supposed to include
error checking of the return values.
Konstantin Ovsepian [Thu, 22 Aug 2024 15:41:36 +0000 (08:41 -0700)]
blk_iocost: fix more out of bound shifts
Recently running UBSAN caught few out of bound shifts in the
ioc_forgive_debts() function:
UBSAN: shift-out-of-bounds in block/blk-iocost.c:2142:38
shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long
long')
...
UBSAN: shift-out-of-bounds in block/blk-iocost.c:2144:30
shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long
long')
...
Call Trace:
<IRQ>
dump_stack_lvl+0xca/0x130
__ubsan_handle_shift_out_of_bounds+0x22c/0x280
? __lock_acquire+0x6441/0x7c10
ioc_timer_fn+0x6cec/0x7750
? blk_iocost_init+0x720/0x720
? call_timer_fn+0x5d/0x470
call_timer_fn+0xfa/0x470
? blk_iocost_init+0x720/0x720
__run_timer_base+0x519/0x700
...
Actual impact of this issue was not identified but I propose to fix the
undefined behaviour.
The proposed fix to prevent those out of bound shifts consist of
precalculating exponent before using it the shift operations by taking
min value from the actual exponent and maximum possible number of bits.
Ming Lei [Mon, 12 Aug 2024 01:36:24 +0000 (09:36 +0800)]
ublk: move zone report data out of request pdu
ublk zoned takes 16 bytes in each request pdu just for handling REPORT_ZONE
operation, this way does waste memory since request pdu is allocated
statically.
Store the transient zone report data into one global xarray, and remove
it after the report zone request is completed. This way is reasonable
since report zone is run in slow code path.
Fixes: 29802d7ca33b ("ublk: enable zoned storage support") Cc: Damien Le Moal <dlemoal@kernel.org> Cc: Andreas Hindborg <a.hindborg@samsung.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20240812013624.587587-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
YueHaibing [Fri, 2 Aug 2024 09:51:47 +0000 (17:51 +0800)]
drbd: Remove unused extern declarations
Commit b411b3637fa7 ("The DRBD driver") declared but never implemented
drbd_read_remote(), is_valid_ar_handle() and drbd_set_recv_tcq().
And commit 668700b40a7c ("drbd: Create a dedicated workqueue for sending acks on the control connection")
never implemented drbd_send_ping_wf().
Commit 2451fc3b2bd3 ("drbd: Removed the BIO_RW_BARRIER support form the receiver/epoch code")
leave w_e_reissue() declaration unused.
Commit 8fe605513ab4 ("drbd: Rename drbdd_init() -> drbd_receiver()")
rename drbdd_init() and leave unsued declaration. Also drbd_asender() is removed in
commit 1c03e52083c8 ("drbd: Rename asender to ack_receiver").
Ofir Gal [Thu, 18 Jul 2024 08:45:14 +0000 (11:45 +0300)]
drbd: use sendpages_ok() instead of sendpage_ok()
Currently _drbd_send_page() use sendpage_ok() in order to enable
MSG_SPLICE_PAGES, it check the first page of the iterator, the iterator
may represent contiguous pages.
MSG_SPLICE_PAGES enables skb_splice_from_iter() which checks all the
pages it sends with sendpage_ok().
When _drbd_send_page() sends an iterator that the first page is
sendable, but one of the other pages isn't skb_splice_from_iter() warns
and aborts the data transfer.
Using the new helper sendpages_ok() in order to enable MSG_SPLICE_PAGES
solves the issue.
Ofir Gal [Thu, 18 Jul 2024 08:45:13 +0000 (11:45 +0300)]
nvme-tcp: use sendpages_ok() instead of sendpage_ok()
Currently nvme_tcp_try_send_data() use sendpage_ok() in order to disable
MSG_SPLICE_PAGES, it check the first page of the iterator, the iterator
may represent contiguous pages.
MSG_SPLICE_PAGES enables skb_splice_from_iter() which checks all the
pages it sends with sendpage_ok().
When nvme_tcp_try_send_data() sends an iterator that the first page is
sendable, but one of the other pages isn't skb_splice_from_iter() warns
and aborts the data transfer.
Using the new helper sendpages_ok() in order to disable MSG_SPLICE_PAGES
solves the issue.
Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Ofir Gal <ofir.gal@volumez.com> Link: https://lore.kernel.org/r/20240718084515.3833733-3-ofir.gal@volumez.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ofir Gal [Thu, 18 Jul 2024 08:45:12 +0000 (11:45 +0300)]
net: introduce helper sendpages_ok()
Network drivers are using sendpage_ok() to check the first page of an
iterator in order to disable MSG_SPLICE_PAGES. The iterator can
represent list of contiguous pages.
When MSG_SPLICE_PAGES is enabled skb_splice_from_iter() is being used,
it requires all pages in the iterator to be sendable. Therefore it needs
to check that each page is sendable.
The patch introduces a helper sendpages_ok(), it returns true if all the
contiguous pages are sendable.
Drivers who want to send contiguous pages with MSG_SPLICE_PAGES may use
this helper to check whether the page list is OK. If the helper does not
return true, the driver should remove MSG_SPLICE_PAGES flag.
Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Ofir Gal <ofir.gal@volumez.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20240718084515.3833733-2-ofir.gal@volumez.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
ioprio works on the blk-cgroup level, all disks in the same cgroup
are the same, and the struct ioprio_blkg doesn't have anything in it.
Hence register the policy is enough, because cpd_alloc/free_fn will
be handled for each blk-cgroup, and there is no need to activate the
policy for disk. Hence remove blk_ioprio_init/exit and
ioprio_alloc/free_pd.
Currently, if config is enabled, then ioprio is always enabled by
default from blkcg_init_disk(), hence there is no point to check if
the policy is enabled from blkg in ioprio_blkcg_from_bio(). Hence remove
it and get blkcg directly from bio.
Merge tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix RPM package build error caused by an incorrect locale setup
- Mark modules.weakdep as ghost in RPM package
- Fix the odd combination of -S and -c in stack protector scripts,
which is an error with the latest Clang
* tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Fix '-S -c' in x86 stack protector scripts
kbuild: rpm-pkg: ghost modules.weakdep file
kbuild: rpm-pkg: Fix C locale setup
minmax: simplify and clarify min_t()/max_t() implementation
This simplifies the min_t() and max_t() macros by no longer making them
work in the context of a C constant expression.
That means that you can no longer use them for static initializers or
for array sizes in type definitions, but there were only a couple of
such uses, and all of them were converted (famous last words) to use
MIN_T/MAX_T instead.
Cc: David Laight <David.Laight@aculab.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 3a7e02c040b1 ("minmax: avoid overly complicated constant
expressions in VM code") added the simpler MIN_T/MAX_T macros in order
to avoid some excessive expansion from the rather complicated regular
min/max macros.
The complexity of those macros stems from two issues:
(a) trying to use them in situations that require a C constant
expression (in static initializers and for array sizes)
(b) the type sanity checking
and MIN_T/MAX_T avoids both of these issues.
Now, in the whole (long) discussion about all this, it was pointed out
that the whole type sanity checking is entirely unnecessary for
min_t/max_t which get a fixed type that the comparison is done in.
But that still leaves min_t/max_t unnecessarily complicated due to
worries about the C constant expression case.
However, it turns out that there really aren't very many cases that use
min_t/max_t for this, and we can just force-convert those.
This does exactly that.
Which in turn will then allow for much simpler implementations of
min_t()/max_t(). All the usual "macros in all upper case will evaluate
the arguments multiple times" rules apply.
We should do all the same things for the regular min/max() vs MIN/MAX()
cases, but that has the added complexity of various drivers defining
their own local versions of MIN/MAX, so that needs another level of
fixes first.
kbuild: Fix '-S -c' in x86 stack protector scripts
After a recent change in clang to stop consuming all instances of '-S'
and '-c' [1], the stack protector scripts break due to the kernel's use
of -Werror=unused-command-line-argument to catch cases where flags are
not being properly consumed by the compiler driver:
$ echo | clang -o - -x c - -S -c -Werror=unused-command-line-argument
clang: error: argument unused during compilation: '-c' [-Werror,-Wunused-command-line-argument]
This results in CONFIG_STACKPROTECTOR getting disabled because
CONFIG_CC_HAS_SANE_STACKPROTECTOR is no longer set.
'-c' and '-S' both instruct the compiler to stop at different stages of
the pipeline ('-S' after compiling, '-c' after assembling), so having
them present together in the same command makes little sense. In this
case, the test wants to stop before assembling because it is looking at
the textual assembly output of the compiler for either '%fs' or '%gs',
so remove '-c' from the list of arguments to resolve the error.
All versions of GCC continue to work after this change, along with
versions of clang that do or do not contain the change mentioned above.
Cc: stable@vger.kernel.org Fixes: 4f7fd4d7a791 ("[PATCH] Add the -fstack-protector option to the CFLAGS") Fixes: 60a5317ff0f4 ("x86: implement x86_32 stack protector") Link: https://github.com/llvm/llvm-project/commit/6461e537815f7fa68cef06842505353cf5600e9c Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Merge tag 'v6.11-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Enable turbostat extensions to add both perf and PMT (Intel
Platform Monitoring Technology) counters via the cmdline
- Demonstrate PMT access with built-in support for Meteor Lake's
Die C6 counter
* tag 'v6.11-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2024.07.26
tools/power turbostat: Include umask=%x in perf counter's config
tools/power turbostat: Document PMT in turbostat.8
tools/power turbostat: Add MTL's PMT DC6 builtin counter
tools/power turbostat: Add early support for PMT counters
tools/power turbostat: Add selftests for added perf counters
tools/power turbostat: Add selftests for SMI, APERF and MPERF counters
tools/power turbostat: Move verbose counter messages to level 2
tools/power turbostat: Move debug prints from stdout to stderr
tools/power turbostat: Fix typo in turbostat.8
tools/power turbostat: Add perf added counter example to turbostat.8
tools/power turbostat: Fix formatting in turbostat.8
tools/power turbostat: Extend --add option with perf counters
tools/power turbostat: Group SMI counter with APERF and MPERF
tools/power turbostat: Add ZERO_ARRAY for zero initializing builtin array
tools/power turbostat: Replace enum rapl_source and cstate_source with counter_source
tools/power turbostat: Remove anonymous union from rapl_counter_info_t
tools/power/turbostat: Switch to new Intel CPU model defines
Merge tag 'cxl-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
"Core:
- A CXL maturity map has been added to the documentation to detail
the current state of CXL enabling.
It provides the status of the current state of various CXL features
to inform current and future contributors of where things are and
which areas need contribution.
- A notifier handler has been added in order for a newly created CXL
memory region to trigger the abstract distance metrics calculation.
This should bring parity for CXL memory to the same level vs
hotplugged DRAM for NUMA abstract distance calculation. The
abstract distance reflects relative performance used for memory
tiering handling.
- An addition for XOR math has been added to address the CXL DPA to
SPA translation.
CXL address translation did not support address interleave math
with XOR prior to this change.
Fixes:
- Fix to address race condition in the CXL memory hotplug notifier
- Add missing MODULE_DESCRIPTION() for CXL modules
- Fix incorrect vendor debug UUID define
Misc:
- A warning has been added to inform users of an unsupported
configuration when mixing CXL VH and RCH/RCD hierarchies
- The ENXIO error code has been replaced with EBUSY for inject poison
limit reached via debugfs and cxl-test support
- Moving the PCI config read in cxl_dvsec_rr_decode() to avoid
unnecessary PCI config reads
- A refactor to a common struct for DRAM and general media CXL
events"
* tag 'cxl-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/core/pci: Move reading of control register to immediately before usage
cxl: Remove defunct code calculating host bridge target positions
cxl/region: Verify target positions using the ordered target list
cxl: Restore XOR'd position bits during address translation
cxl/core: Fold cxl_trace_hpa() into cxl_dpa_to_hpa()
cxl/test: Replace ENXIO with EBUSY for inject poison limit reached
cxl/memdev: Replace ENXIO with EBUSY for inject poison limit reached
cxl/acpi: Warn on mixed CXL VH and RCH/RCD Hierarchy
cxl/core: Fix incorrect vendor debug UUID define
Documentation: CXL Maturity Map
cxl/region: Simplify cxl_region_nid()
cxl/region: Support to calculate memory tier abstract distance
cxl/region: Fix a race condition in memory hotplug notifier
cxl: add missing MODULE_DESCRIPTION() macros
cxl/events: Use a common struct for DRAM and General Media events
Merge tag 'unicode-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode
Pull unicode update from Gabriel Krisman Bertazi:
"Two small fixes to silence the compiler and static analyzers tools
from Ben Dooks and Jeff Johnson"
* tag 'unicode-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode:
unicode: add MODULE_DESCRIPTION() macros
unicode: make utf8 test count static
In the same way as for other similar files, mark as ghost the new file
generated by depmod for configured weak dependencies for modules,
modules.weakdep, so that although it is not included in the package,
claim the ownership on it.
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Merge tag '6.11-rc-smb-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- fix for potential null pointer use in init cifs
- additional dynamic trace points to improve debugging of some common
scenarios
- two SMB1 fixes (one addressing reconnect with POSIX extensions, one a
mount parsing error)
* tag '6.11-rc-smb-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: add dynamic trace point for session setup key expired failures
smb3: add four dynamic tracepoints for copy_file_range and reflink
smb3: add dynamic tracepoint for reflink errors
cifs: mount with "unix" mount option for SMB1 incorrectly handled
cifs: fix reconnect with SMB1 UNIX Extensions
cifs: fix potential null pointer use in destroy_workqueue in init_cifs error path
Merge tag 'block-6.11-20240726' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Fix request without payloads cleanup (Leon)
- Use new protection information format (Francis)
- Improved debug message for lost pci link (Bart)
- Another apst quirk (Wang)
- Use appropriate sysfs api for printing chars (Markus)
- ublk async device deletion fix (Ming)
- drbd kerneldoc fixups (Simon)
- Fix deadlock between sd removal and release (Yang)
* tag 'block-6.11-20240726' of git://git.kernel.dk/linux:
nvme-pci: add missing condition check for existence of mapped data
ublk: fix UBLK_CMD_DEL_DEV_ASYNC handling
block: fix deadlock between sd_remove & sd_release
drbd: Add peer_device to Kernel doc
nvme-core: choose PIF from QPIF if QPIFS supports and PIF is QTYPE
nvme-pci: Fix the instructions for disabling power management
nvme: remove redundant bdev local variable
nvme-fabrics: Use seq_putc() in __nvmf_concat_opt_tokens()
nvme/pci: Add APST quirk for Lenovo N60z laptop
Merge tag 'vfs-6.11-rc1.fixes.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"This contains two fixes for this merge window:
VFS:
- I noticed that it is possible for a privileged user to mount most
filesystems with a non-initial user namespace in sb->s_user_ns.
When fsopen() is called in a non-init namespace the caller's
namespace is recorded in fs_context->user_ns. If the returned file
descriptor is then passed to a process privileged in init_user_ns,
that process can call fsconfig(fd_fs, FSCONFIG_CMD_CREATE*),
creating a new superblock with sb->s_user_ns set to the namespace
of the process which called fsopen().
This is problematic as only filesystems that raise FS_USERNS_MOUNT
are known to be able to support a non-initial s_user_ns. Others may
suffer security issues, on-disk corruption or outright crash the
kernel. Prevent that by restricting such delegation to filesystems
that allow FS_USERNS_MOUNT.
Note, that this delegation requires a privileged process to
actually create the superblock so either the privileged process is
cooperaing or someone must have tricked a privileged process into
operating on a fscontext file descriptor whose origin it doesn't
know (a stupid idea).
The bug dates back to about 5 years afaict.
Misc:
- Fix hostfs parsing when the mount request comes in via the legacy
mount api.
In the legacy mount api hostfs allows to specify the host directory
mount without any key.
Restore that behavior"
* tag 'vfs-6.11-rc1.fixes.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
hostfs: fix the host directory parse when mounting.
fs: don't allow non-init s_user_ns for filesystems without FS_USERNS_MOUNT
Merge tag 'rust-6.11' of https://github.com/Rust-for-Linux/linux
Pull Rust updates from Miguel Ojeda:
"The highlight is the establishment of a minimum version for the Rust
toolchain, including 'rustc' (and bundled tools) and 'bindgen'.
The initial minimum will be the pinned version we currently have, i.e.
we are just widening the allowed versions. That covers three stable
Rust releases: 1.78.0, 1.79.0, 1.80.0 (getting released tomorrow),
plus beta, plus nightly.
This should already be enough for kernel developers in distributions
that provide recent Rust compiler versions routinely, such as Arch
Linux, Debian Unstable (outside the freeze period), Fedora Linux,
Gentoo Linux (especially the testing channel), Nix (unstable) and
openSUSE Slowroll and Tumbleweed.
In addition, the kernel is now being built-tested by Rust's pre-merge
CI. That is, every change that is attempting to land into the Rust
compiler is tested against the kernel, and it is merged only if it
passes. Similarly, the bindgen tool has agreed to build the kernel in
their CI too.
Thus, with the pre-merge CI in place, both projects hope to avoid
unintentional changes to Rust that break the kernel. This means that,
in general, apart from intentional changes on their side (that we will
need to workaround conditionally on our side), the upcoming Rust
compiler versions should generally work.
In addition, the Rust project has proposed getting the kernel into
stable Rust (at least solving the main blockers) as one of its three
flagship goals for 2024H2 [1].
I would like to thank Niko, Sid, Emilio et al. for their help
promoting the collaboration between Rust and the kernel.
Toolchain and infrastructure:
- Support several Rust toolchain versions.
- Support several bindgen versions.
- Remove 'cargo' requirement and simplify 'rusttest', thanks to
'alloc' having been dropped last cycle.
- Provide proper error reporting for the 'rust-analyzer' target.
'kernel' crate:
- Add 'uaccess' module with a safe userspace pointers abstraction.
- Add 'page' module with a 'struct page' abstraction.
- Support more complex generics in workqueue's 'impl_has_work!'
macro.
'macros' crate:
- Add 'firmware' field support to the 'module!' macro.
- Improve 'module!' macro documentation.
Documentation:
- Provide instructions on what packages should be installed to build
the kernel in some popular Linux distributions.
- Introduce the new kernel.org LLVM+Rust toolchains.
- Explain '#[no_std]'.
And a few other small bits"
Link: https://rust-lang.github.io/rust-project-goals/2024h2/index.html#flagship-goals
* tag 'rust-6.11' of https://github.com/Rust-for-Linux/linux: (26 commits)
docs: rust: quick-start: add section on Linux distributions
rust: warn about `bindgen` versions 0.66.0 and 0.66.1
rust: start supporting several `bindgen` versions
rust: work around `bindgen` 0.69.0 issue
rust: avoid assuming a particular `bindgen` build
rust: start supporting several compiler versions
rust: simplify Clippy warning flags set
rust: relax most deny-level lints to warnings
rust: allow `dead_code` for never constructed bindings
rust: init: simplify from `map_err` to `inspect_err`
rust: macros: indent list item in `paste!`'s docs
rust: add abstraction for `struct page`
rust: uaccess: add typed accessors for userspace pointers
uaccess: always export _copy_[from|to]_user with CONFIG_RUST
rust: uaccess: add userspace pointers
kbuild: rust-analyzer: improve comment documentation
kbuild: rust-analyzer: better error handling
docs: rust: no_std is used
rust: alloc: add __GFP_HIGHMEM flag
rust: alloc: fix typo in docs for GFP_NOWAIT
...
projects / users / jedix / linux-maple.git / log