Malcolm Priestley [Sat, 2 May 2020 11:20:13 +0000 (12:20 +0100)]
staging: vt6656: refactor power save operation
At present the power save wake uses the listening interval and
the slow path to wake up.
The following using a beacon interval of 100 and
listen interval of 5.
The TBTT set at 100 wake-up sequence;
100 TBTT wake-up set to listen interval.
200 TBTT
300 TBTT
400 TBTT --> call vnt_next_tbtt_wakeup on slow path
Beacon heard and passed through at the approx 500 interval.
500 TBTT
600 TBTT wake-up set to listen interval
The TBTT set at 500 wake-up sequence and always listen flagged on;
100 No TBTT
200 No TBTT
300 No TBTT
400 No TBTT
500 TBTT - beacon heard and passed through
600 No TBTT
A further enhancement because the TBTT is more precise
the dtim_period can be used instead.
When Power save is off the TBTT continues to run at the listen
interval but all the other beacons are passed.
The code in vnt_int_process_data is no longer required.
Oscar Carter [Wed, 29 Apr 2020 15:38:38 +0000 (17:38 +0200)]
staging: vt6656: Refactor the vnt_rf_table_download function
Create a constant array of struct vnt_table_info type elements with the
necessary info (address and length) about all the rf tables for every rf
type.
In every case of the "switch" statement replace the hardcoded info about
these tables with and index to the new constant array. Moreover, use
this array index to extract the necessary info in every call to the
vnt_control_out_* functions.
Check if this index has been set and return without error otherwise.
So, avoid the execution of code that previously did nothing due to
lengths with values of zero for some rf types.
Also remove all the variables that are now unused.
This way reduce the stack footprint, and make the code more clear.
Oscar Carter [Wed, 29 Apr 2020 15:23:07 +0000 (17:23 +0200)]
staging: vt6656: Refactor the vnt_set_bss_mode function
Remove all the duplicate code in the "if, else if, else" statements as
all the branches in every "if" are almost the same. The only difference
between branches is some value. So, use variables instead of repeat
code.
Also, remove the unnecessary casting to u8 type because the
"priv->bb_type" variable is already an u8 tpe.
staging: wfx: avoid compiler warning on empty array
When CONFIG_OF is disabled, gcc-9 produces a warning about the
wfx_sdio_of_match[] array having a declaration without a dimension:
drivers/staging/wfx/bus_sdio.c:159:34: error: array 'wfx_sdio_of_match' assumed to have one element [-Werror]
159 | static const struct of_device_id wfx_sdio_of_match[];
| ^~~~~~~~~~~~~~~~~
Move the proper declaration up and out of the #ifdef instead.
staging: qlge: Remove gotos from ql_set_mac_addr_reg
As suggested by Joe Perches, this patch removes the 'exit' label
from the ql_set_mac_addr_reg function and replaces the goto
statements with break statements.
staging: qlge: Fix indentation in ql_set_mac_addr_reg
Based on Joe Perches' feedback, fix the indentation throughout
ql_set_mac_addr_reg. This helps fix several "line over 80 characters"
warnings along with the original "multiple line dereference" warning.
Fix checkpatch.pl warnings:
WARNING: Avoid multiple line dereference - prefer 'qdev->func'
WARNING: line over 80 characters
Samuel Thibault [Sat, 25 Apr 2020 19:32:26 +0000 (21:32 +0200)]
staging/speakup: Add inflection synth parameter
The inflection parameter, i.e. the pitch range, allows to change the
expressiveness of the synthesized voice. This is supported by the DEC
talk synths, and software synthesizers such as espeak/espeak-ng.
Jason Yan [Mon, 27 Apr 2020 03:23:41 +0000 (11:23 +0800)]
staging: rtl8723bs: core: remove set but not used 'pwrpriv'
Fix the following gcc warning:
drivers/staging/rtl8723bs/core/rtw_mlme.c:1100:24: warning: variable
‘pwrpriv’ set but not used [-Wunused-but-set-variable]
struct pwrctrl_priv *pwrpriv;
^~~~~~~
Jason Yan [Mon, 27 Apr 2020 03:23:40 +0000 (11:23 +0800)]
staging: rtl8723bs: core: remove set but not used 'listen_interval'
Fix the following gcc warning:
drivers/staging/rtl8723bs/core/rtw_mlme_ext.c:1173:18: warning: variable
‘listen_interval’ set but not used [-Wunused-but-set-variable]
u16 capab_info, listen_interval;
^~~~~~~~~~~~~~~
Jason Yan [Mon, 27 Apr 2020 03:23:39 +0000 (11:23 +0800)]
staging: rtl8723bs: core: remove set but not used 'algthm'
Fix the following gcc warning:
drivers/staging/rtl8723bs/core/rtw_mlme_ext.c:1087:33: warning: variable
‘algthm’ set but not used [-Wunused-but-set-variable]
unsigned int seq, len, status, algthm, offset;
^~~~~~
Jason Yan [Mon, 27 Apr 2020 03:23:38 +0000 (11:23 +0800)]
Staging: rtl8723bs: core: remove set but not used 'ptxservq'
Fix the following gcc warning:
drivers/staging/rtl8723bs/core/rtw_sta_mgt.c:556:19: warning: variable
‘ptxservq’ set but not used [-Wunused-but-set-variable]
struct tx_servq *ptxservq;
^~~~~~~~
Jason Yan [Mon, 27 Apr 2020 03:23:36 +0000 (11:23 +0800)]
staging: rtl8723bs: os_dep: remove set but not used 'uintRet'
Fix the following gcc warning:
drivers/staging/rtl8723bs/os_dep/ioctl_linux.c:2564:22: warning:
variable ‘uintRet’ set but not used [-Wunused-but-set-variable]
unsigned int uintRet = 0;
^~~~~~~
Oscar Carter [Sat, 25 Apr 2020 15:17:45 +0000 (17:17 +0200)]
staging: vt6656: Remove the local variable "array"
Remove the local variable "array" and all the memcpy function calls
because this copy operation from different arrays to this variable is
unnecessary.
The vnt_control_out function already does a kmemdup copy of its const
char *buffer argument and this was made unnecessary by:
commit 12ecd24ef932
("staging: vt6656: use off stack for out buffer USB transfers.")
Author: Malcolm Priestley <tvboxspy@gmail.com>
Date: Sat Apr 22 11:14:57 2017 +0100
staging: vt6656: use off stack for out buffer USB transfers.
Since 4.9 mandated USB buffers be heap allocated this causes the driver
to fail.
Since there is a wide range of buffer sizes use kmemdup to create
allocated buffer.
So, the same result can be achieved using the arrays directly.
staging: qlge: Remove print statements for lbq_clean_idx and lbq_free_cnt
Remove debug print statements referring to non-existent fields
'lbq_clean_idx' and 'lbq_free_cnt' in the 'rx_ring' struct, which causes
a compilation failure when QL_DEV_DUMP is set.
These fields were initially removed as a part of commit aec626d2092f
("staging: qlge: Update buffer queue prod index despite oom") in 2019.
Their replacement fields ('next_to_use' and 'next_to_clean') are already
being printed, so this patch does not add new debug statements for them.
staging: qlge: Remove print statement for vlgrp field
Remove statement that tries to print the non-existent 'vlgrp' field
in the 'ql_adapter' struct, which causes a compilation failure when
QL_DEV_DUMP is set.
vlgrp seems to have been removed from ql_adapter as a part of
commit 18c49b91777c ("qlge: do vlan cleanup") in 2011.
vlgrp might be replaced by the 'active_vlans' array introduced in the
aforementioned commit. But I'm not sure if printing all 64 values of
that array would help with debugging this driver, so I'm leaving it
out of the debug code in this patch.
Oscar Carter [Sat, 25 Apr 2020 13:42:56 +0000 (15:42 +0200)]
staging: vt6656: Check the return value of vnt_control_out_* calls
Check the return value of vnt_control_out_* function calls. When
necessary modify the function prototype to be able to return the new
checked error code.
It's safe to modify all the function prototypes without fix the call
because the only change is the return value from void to int. If before
the call didn't check the return value, now neither.
The device raises error indications when it thinks there is a bug in the
driver and it can't recover it (while it raises exception when a bug is
detected in the device).
The current list of of errors was a bit dated.
This patch cleans up the list of errors and the associated message. It
is also the right time to clean up the way the error indications are
handled. Replace the switch..case with a clean loop over an array.
Until now, the exception received from the chip was only displayed if
driver was compiled with DEBUG enabled. It was not very convenient to
help users. We prefer to show the exception unconditionally.
In add, this patch provides the semantic of the first bytes of the
struct.
The names of the hardware interface messages are not displayed correctly
in tracepoints. Thus, REQ_JOIN is displayed JOIN_REQ. Fix that in order
to get the names as defined in headers of HIF API.
The struct hif_mib_extended_count_table contains some debug information
accessible from the debugfs. The struct contains not yet used fields at
the end. In order to support future firmware versions, this patch also
show these not yet named fields.
The device keep up to date three series of stats. One for each
virtual interface and one for the whole device.
Until to now, the stats for the whole device were unavailable. Moreover,
it is interesting to retrieve counters for all interfaces even if they
are not awake.
Change the counters available in debugfs in order to retrieve stats
from all interfaces.
staging: wfx: fix the warning "inconsistent notification"
In some circumstances, Tx traffic is sent without associated station but
the station exists when the Tx status is received. Beside that, the
driver keep a counter associated to each station. So, in this case, the
counter is not incremented, but is decremented. In this case a warning
"inconsistent notification" appears:
------------[ cut here ]------------
WARNING: CPU: 3 PID: 82 at /home/jerome/wfx/data_tx.c:469 wfx_skb_dtor+0x1a4/0x1d4 [wfx]
inconsistent notification
Modules linked in: [...]
CPU: 3 PID: 82 Comm: kworker/3:1H Tainted: G C O 4.19.57-v7l+ #1244
Hardware name: BCM2835
Workqueue: events_highpri bh_work [wfx]
[<c0212c8c>] (unwind_backtrace) from [<c020d49c>] (show_stack+0x20/0x24)
[<c020d49c>] (show_stack) from [<c0976220>] (dump_stack+0xd4/0x118)
[<c0976220>] (dump_stack) from [<c0222270>] (__warn+0x104/0x11c)
[<c0222270>] (__warn) from [<c02222e0>] (warn_slowpath_fmt+0x58/0x74)
[<c02222e0>] (warn_slowpath_fmt) from [<bf497b48>] (wfx_skb_dtor+0x1a4/0x1d4 [wfx])
[<bf497b48>] (wfx_skb_dtor [wfx]) from [<bf4988b4>] (wfx_tx_confirm_cb+0x198/0x2f0 [wfx])
[<bf4988b4>] (wfx_tx_confirm_cb [wfx]) from [<bf49d054>] (hif_tx_confirm+0x50/0x70 [wfx])
[<bf49d054>] (hif_tx_confirm [wfx]) from [<bf49d42c>] (wfx_handle_rx+0x128/0x22c [wfx])
[<bf49d42c>] (wfx_handle_rx [wfx]) from [<bf4953cc>] (bh_work+0x3cc/0x964 [wfx])
[<bf4953cc>] (bh_work [wfx]) from [<c023dab8>] (process_one_work+0x170/0x458)
[<c023dab8>] (process_one_work) from [<c023ddfc>] (worker_thread+0x5c/0x5a4)
[<c023ddfc>] (worker_thread) from [<c02440e8>] (kthread+0x138/0x168)
[<c02440e8>] (kthread) from [<c02010ac>] (ret_from_fork+0x14/0x28)
Exception stack(0xee199fb0 to 0xee199ff8)
9fa0: 00000000000000000000000000000000
9fc0: 0000000000000000000000000000000000000000000000000000000000000000
9fe0: 000000000000000000000000000000000000001300000000
---[ end trace 64b9e754e12ef7de ]---
This patch fix this race between the station creation and the Tx data.
It has been reported that trying to send small packets of data could
produce a "inconsistent notification" warning.
It seems that in some circumstances, the number of frame queued in the
driver could greatly increase and exceed UCHAR_MAX. So the field
"buffered" from struct sta_priv can overflow.
Just increase the size of "bueffered" to fix the problem.
staging: wfx: fix highest Rx value declared in ieee80211_supported_band
The highest Rx value declared in ieee80211_supported_band had two
problems:
1. The value should be little endian
2. ShortGI was not taken into account. So value should be 72 instead
of 65.
staging: wfx: add an explicit warning when chip detect too high temperature
Device is able to measure its temperature and raise warning when this
one is too high. If the the temperature is even higher, the chipis also
able to send an error just before to stop responding.
Until now, the error message was "asynchronous error: unknown (6)".
staging: wfx: add support for 'device too hot' indication
Device is able to detect a high temperature. In this case, the traffic
is not allowed to be sent until the temperature decrease.
This patch detects the warnings raised by the device and stop the
traffic accordingly. It also add a delayed task as safeguard in case the
chip would never send the indication that the temperature decrease.
wfx_suspend_resume_mc() is called when the device is about to sent a
DTIM. This is the right moment to enqueue Content After DTIM Beacon
(CAB).
However, wfx_suspend_resume_mc() is also called when the DTIM period
ends. Until now, this event did also trig CAB.
Note this issue did not have too much impact since when a CAB is sent
outside of DTIM window, an error is reported by the firmware and
mac80211 retries to send the data.
staging: wfx: fix support for AP that do not support PS-Poll
When multiple virtual interfaces (on different channels) are in use, the
device ask to activate Power Save on station interfaces. The device
developers recommends to use legacy PS-Poll in this case since it is the
mode that disturb the less the other interface. However, some AP start
to not answer anymore to PS-Poll. The device is able to detect this case
and return a special warning in this case.
So, this commit catch the warning and force usage of FastPS in this
case.
In order to confuse the less possible the other interface a small FastPS
period is used (30ms).
staging: wfx: mark chip frozen on error indication
When the driver receive an error indication, it means the chip won't
answer to any command anymore. Therefore, mark the chip frozen when it
happens (as when the driver receive an exception indication).
Merge tag '5.7-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Five cifs/smb3 fixes:two for DFS reconnect failover, one lease fix for
stable and the others to fix a missing spinlock during reconnect"
* tag '5.7-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix uninitialised lease_key in open_shroot()
cifs: ensure correct super block for DFS reconnect
cifs: do not share tcons with DFS
cifs: minor update to comments around the cifs_tcp_ses_lock mutex
cifs: protect updating server->dstaddr with a spinlock
Merge tag 'usb-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of USB driver fixes for 5.7-rc3.
Nothing huge, just the usual collection of:
- xhci fixes
- gadget driver fixes
- syzkaller fuzzing fixes
- new device ids and DT bindings
- new quirks added for broken devices
A few of the gadget driver fixes show up twice here as they were
applied to my branch, and also by Felipe to his branch which I then
pulled in as we got out of sync a bit.
All of these have been in linux-next with no reported issues"
* tag 'usb-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
USB: sisusbvga: Change port variable from signed to unsigned
usb-storage: Add unusual_devs entry for JMicron JMS566
USB: hub: Revert commit bd0e6c9614b9 ("usb: hub: try old enumeration scheme first for high speed devices")
USB: hub: Fix handling of connect changes during sleep
usb: typec: altmode: Fix typec_altmode_get_partner sometimes returning an invalid pointer
xhci: Don't clear hub TT buffer on ep0 protocol stall
xhci: prevent bus suspend if a roothub port detected a over-current condition
xhci: Fix handling halted endpoint even if endpoint ring appears empty
usb: raw-gadget: Fix copy_to/from_user() checks
usb: raw-gadget: fix raw_event_queue_fetch locking
usb: gadget: udc: atmel: Fix vbus disconnect handling
usb: dwc3: gadget: Fix request completion check
USB: Add USB_QUIRK_DELAY_CTRL_MSG and USB_QUIRK_DELAY_INIT for Corsair K70 RGB RAPIDFIRE
phy: tegra: Select USB_COMMON for usb_get_maximum_speed()
usb: typec: tcpm: Ignore CC and vbus changes in PORT_RESET change
usb: f_fs: Clear OS Extended descriptor counts to zero in ffs_data_reset()
cdc-acm: introduce a cool down
cdc-acm: close race betrween suspend() and acm_softint
UAS: fix deadlock in error handling and PM flushing work
UAS: no use logging any details in case of ENODEV
...
Merge tag 'tty-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some tty and serial driver fixes for 5.7-rc3.
The "largest" in here are a number of reverts for previous changes to
the uartps serial driver that turned out to not be a good idea at all.
The others are just small fixes found by people and tools. Included in
here is a much-reported symbol export needed by previous changes that
happened in 5.7-rc1. All of these have been in linux-next for a while
with no reported issues"
* tag 'tty-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: hvc: fix buffer overflow during hvc_alloc().
tty: rocket, avoid OOB access
tty: serial: bcm63xx: fix missing clk_put() in bcm63xx_uart
vt: don't hardcode the mem allocation upper bound
tty: serial: owl: add "much needed" clk_prepare_enable()
vt: don't use kmalloc() for the unicode screen buffer
tty/sysrq: Export sysrq_mask(), sysrq_toggle_support()
serial: sh-sci: Make sure status register SCxSR is read in correct sequence
serial: sunhv: Initialize lock for non-registered console
Revert "serial: uartps: Register own uart console and driver structures"
Revert "serial: uartps: Move Port ID to device data structure"
Revert "serial: uartps: Change uart ID port allocation"
Revert "serial: uartps: Do not allow use aliases >= MAX_UART_INSTANCES"
Revert "serial: uartps: Fix error path when alloc failed"
Revert "serial: uartps: Use the same dynamic major number for all ports"
Revert "serial: uartps: Fix uartps_major handling"
Merge tag 'staging-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO driver fixes from Greg KH:
"Here are some small staging and IIO driver fixes for 5.7-rc3
Lots of tiny things for reported issues in staging and IIO drivers,
including a counter driver fix as well (the iio drivers seem to be
tied to those). Full details of the fixes are in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (27 commits)
staging: vt6656: Fix calling conditions of vnt_set_bss_mode
staging: comedi: Fix comedi_device refcnt leak in comedi_open
staging: vt6656: Fix pairwise key entry save.
staging: vt6656: Fix drivers TBTT timing counter.
staging: vt6656: Don't set RCR_MULTICAST or RCR_BROADCAST by default.
MAINTAINERS: remove Stefan Popa's email
iio: adc: ad7192: fix null pointer de-reference crash during probe
iio: core: remove extra semi-colon from devm_iio_device_register() macro
iio: adc: ti-ads8344: properly byte swap value
iio: imu: inv_mpu6050: fix suspend/resume with runtime power
iio: st_sensors: rely on odr mask to know if odr can be set
iio: xilinx-xadc: Make sure not exceed maximum samplerate
iio: xilinx-xadc: Fix sequencer configuration for aux channels in simultaneous mode
iio: xilinx-xadc: Fix clearing interrupt when enabling trigger
iio: xilinx-xadc: Fix ADC-B powerdown
iio: dac: ad5770r: fix off-by-one check on maximum number of channels
iio: imu: st_lsm6dsx: flush hw FIFO before resetting the device
iio: core: Fix handling of 'dB'
dt-bindings: iio: adc: stm32-adc: fix id relative path
counter: 104-quad-8: Add lock guards - generic interface
...
Merge tag 'driver-core-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small firmware/driver core/debugfs fixes for 5.7-rc3.
The debugfs change is now possible as now the last users of
debugfs_create_u32() have been fixed up in the different trees that
got merged into 5.7-rc1, and I don't want it creeping back in.
The firmware changes did cause a regression in linux-next, so the
final patch here reverts part of that, re-exporting the symbol to
resolve that issue. All of these patches, with the exception of the
final one, have been in linux-next with only that one reported issue"
* tag 'driver-core-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
firmware_loader: revert removal of the fw_fallback_config export
debugfs: remove return value of debugfs_create_u32()
firmware_loader: remove unused exports
firmware: imx: fix compile-testing
Merge tag 's390-5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Add a few notrace annotations to avoid potential crashes when
switching ftrace tracers.
- Avoid setting affinity for floating irqs in pci code.
- Fix build issue found by kbuild test robot.
* tag 's390-5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/protvirt: fix compilation issue
s390/pci: do not set affinity for floating irqs
s390/ftrace: fix potential crashes when switching tracers
Merge tag 'powerpc-5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- One important fix for a bug in the way we find the cache-line size
from the device tree, which was leading to the wrong size being
reported to userspace on some platforms.
- A fix for 8xx STRICT_KERNEL_RWX which was leaving TLB entries around
leading to a window at boot when the strict mapping wasn't enforced.
- A fix to enable our KUAP (kernel user access prevention) debugging on
PPC32.
- A build fix for clang in lib/mpi.
Thanks to: Chris Packham, Christophe Leroy, Nathan Chancellor, Qian Cai.
* tag 'powerpc-5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
lib/mpi: Fix building for powerpc with clang
powerpc/mm: Fix CONFIG_PPC_KUAP_DEBUG on PPC32
powerpc/8xx: Fix STRICT_KERNEL_RWX startup test failure
powerpc/setup_64: Set cache-line-size based on cache-block-size
Luis Chamberlain [Fri, 24 Apr 2020 18:49:15 +0000 (18:49 +0000)]
firmware_loader: revert removal of the fw_fallback_config export
Christoph's patch removed two unsused exported symbols, however, one
symbol is used by the firmware_loader itself. If CONFIG_FW_LOADER=m so
the firmware_loader is modular but CONFIG_FW_LOADER_USER_HELPER=y we fail
the build at mostpost.
This happens because the variable fw_fallback_config is built into the
kernel if CONFIG_FW_LOADER_USER_HELPER=y always, so we need to grant
access to the firmware loader module by exporting it.
Revert only one hunk from his patch.
Fixes: 739604734bd8 ("firmware_loader: remove unused exports") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20200424184916.22843-1-mcgrof@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'sched-urgent-2020-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Misc fixes:
- an uclamp accounting fix
- three frequency invariance fixes and a readability improvement"
* tag 'sched-urgent-2020-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Fix reset-on-fork from RT with uclamp
x86, sched: Move check for CPU type to caller function
x86, sched: Don't enable static key when starting secondary CPUs
x86, sched: Account for CPUs with less than 4 cores in freq. invariance
x86, sched: Bail out of frequency invariance if base frequency is unknown
Merge tag 'perf-urgent-2020-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Two changes:
- fix exit event records
- extend x86 PMU driver enumeration to add Intel Jasper Lake CPU
support"
* tag 'perf-urgent-2020-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: fix parent pid/tid in task exit events
perf/x86/cstate: Add Jasper Lake CPU support
Merge tag 'objtool-urgent-2020-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"Two fixes: fix an off-by-one bug, and fix 32-bit builds on 64-bit
systems"
* tag 'objtool-urgent-2020-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix off-by-one in symbol_by_offset()
objtool: Fix 32bit cross builds
projects / users / jedix / linux-maple.git / log