Arnd Bergmann [Thu, 20 Feb 2025 21:28:28 +0000 (22:28 +0100)]
Merge tag 'scmi-fix-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fix for v6.14
Just a single fix to address the incorrect size of the Tx buffer in the
function scmi_imx_misc_ctrl_set() which is part of NXP/i.MX SCMI vendor
extensions.
* tag 'scmi-fix-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: imx: Correct tx size of scmi_imx_misc_ctrl_set
Sumit Garg [Tue, 4 Feb 2025 07:34:18 +0000 (13:04 +0530)]
tee: optee: Fix supplicant wait loop
OP-TEE supplicant is a user-space daemon and it's possible for it
be hung or crashed or killed in the middle of processing an OP-TEE
RPC call. It becomes more complicated when there is incorrect shutdown
ordering of the supplicant process vs the OP-TEE client application which
can eventually lead to system hang-up waiting for the closure of the
client application.
Allow the client process waiting in kernel for supplicant response to
be killed rather than indefinitely waiting in an unkillable state. Also,
a normal uninterruptible wait should not have resulted in the hung-task
watchdog getting triggered, but the endless loop would.
This fixes issues observed during system reboot/shutdown when supplicant
got hung for some reason or gets crashed/killed which lead to client
getting hung in an unkillable state. It in turn lead to system being in
hung up state requiring hard power off/on to recover.
Geert Uytterhoeven [Fri, 14 Feb 2025 08:31:29 +0000 (09:31 +0100)]
platform: cznic: CZNIC_PLATFORMS should depend on ARCH_MVEBU
CZ.NIC's Turris devices are based on Marvell EBU SoCs. Hence add a
dependency on ARCH_MVEBU, to prevent asking the user about these drivers
when configuring a kernel that cannot run on an affected CZ.NIC Turris
system.
Fixes: 992f1a3d4e88498d ("platform: cznic: Add preliminary support for Turris Omnia MCU") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Geert Uytterhoeven [Wed, 5 Feb 2025 14:41:43 +0000 (15:41 +0100)]
firmware: imx: IMX_SCMI_MISC_DRV should depend on ARCH_MXC
The i.MX System Controller Management Interface firmware is only present
on Freescale i.MX SoCs. Hence add a dependency on ARCH_MXC, to prevent
asking the user about this driver when configuring a kernel without
Freescale i.MX platform support.
Arnd Bergmann [Fri, 14 Feb 2025 14:07:16 +0000 (15:07 +0100)]
Merge tag 'ti-k3-config-fixes-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into HEAD
TI K3 defconfig fixes for v6.14
- Enable TISCI Interrupt Router, Interrupt Aggregator and related drivers.
* tag 'ti-k3-config-fixes-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
arm64: defconfig: Enable TISCI Interrupt Router and Aggregator
Janne Grunau [Sat, 8 Feb 2025 09:22:01 +0000 (10:22 +0100)]
MAINTAINERS: arm: apple: Add Janne as maintainer
Sven and I have agreed to share the maintainership for the ARM/APPLE
platform after Marcan's step down. I'm handling the downstream Asahi
Linux tree since April 2024 and worked on or wrote several drivers for
the platform.
Arnd Bergmann [Fri, 14 Feb 2025 14:04:45 +0000 (15:04 +0100)]
Merge tag 'v6.14-rockchip-dtsfixes1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into HEAD
Fixes for the IOMMU used together with the PCIe controllers on rk3588,
some board-level fixes for wrong pins, pinctrl and regulators, and
disabling DMA on a board where the DMA+uart causes the dma controller to
hang, as well as improved network stability for the OrangePi R1.
* tag 'v6.14-rockchip-dtsfixes1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: adjust SMMU interrupt type on rk3588
arm64: dts: rockchip: disable IOMMU when running rk3588 in PCIe endpoint mode
dt-bindings: rockchip: pmu: Ensure all properties are defined
arm64: dts: rockchip: Fix lcdpwr_en pin for Cool Pi GenBook
arm64: dts: rockchip: fix fixed-regulator renames on rk3399-gru devices
arm64: dts: rockchip: Disable DMA for uart5 on px30-ringneck
arm64: dts: rockchip: Move uart5 pin configuration to px30 ringneck SoM
arm64: dts: rockchip: change eth phy mode to rgmii-id for orangepi r1 plus lts
arm64: dts: rockchip: Fix broken tsadc pinctrl names for rk3588
Peng Fan [Thu, 23 Jan 2025 06:34:41 +0000 (14:34 +0800)]
firmware: arm_scmi: imx: Correct tx size of scmi_imx_misc_ctrl_set
'struct scmi_imx_misc_ctrl_set_in' has a zero length array in the end,
The sizeof will not count 'value[]', and hence Tx size will be smaller
than actual size for Tx,and SCMI firmware will flag this as protocol
error.
Fix this by enlarge the Tx size with 'num * sizeof(__le32)' to count in
the size of data.
Fixes: 61c9f03e22fc ("firmware: arm_scmi: Add initial support for i.MX MISC protocol") Reviewed-by: Jacky Bai <ping.bai@nxp.com> Tested-by: Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by: Jason Liu <jason.hui.liu@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250123063441.392555-1-peng.fan@oss.nxp.com>
(sudeep.holla: Commit rewording and replace hardcoded sizeof(__le32) value) Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Patrick Wildt [Mon, 10 Feb 2025 21:37:29 +0000 (22:37 +0100)]
arm64: dts: rockchip: adjust SMMU interrupt type on rk3588
The SMMU architecture requires wired interrupts to be edge triggered,
which does not align with the DT description for the RK3588. This leads
to interrupt storms, as the SMMU continues to hold the pin high and only
pulls it down for a short amount when issuing an IRQ. Update the DT
description to be in line with the spec and perceived reality.
Niklas Cassel [Fri, 7 Feb 2025 14:39:01 +0000 (15:39 +0100)]
arm64: dts: rockchip: disable IOMMU when running rk3588 in PCIe endpoint mode
Commit da92d3dfc871 ("arm64: dts: rockchip: enable the mmu600_pcie IOMMU
on the rk3588 SoC") enabled the mmu600_pcie IOMMU, both in the normal case
(when all PCIe controllers are running in Root Complex mode) and in the
case when running the pcie3x4 PCIe controller in Endpoint mode.
There have been no issues detected when running the PCIe controllers in
Root Complex mode. During PCI probe time, we will add a SID to the IOMMU
for each PCI device enumerated on the bus, including the root port itself.
However, when running the pcie3x4 PCIe controller in Endpoint mode, we
will only add a single SID to the IOMMU (the SID specified in the iommus
DT property).
The enablement of IOMMU in endpoint mode was verified on setup with two
Rock 5b:s, where the BDF of the Root Complex has BDF (00:00.0).
A Root Complex sending a TLP to the Endpoint will have Requester ID set
to the BDF of the initiator. On the EP side, the Requester ID will then
be used as the SID. This works fine if the Root Complex has a BDF that
matches the iommus DT property, however, if the Root Complex has any other
BDF, we will see something like:
arm-smmu-v3 fc900000.iommu: event: C_BAD_STREAMID client: (unassigned sid) sid: 0x1600 ssid: 0x0
on the endpoint side.
For PCIe controllers running in endpoint mode that always uses the
incoming Requester ID as the SID, the iommus DT property simply isn't
a viable solution. (Neither is iommu-map a viable solution, as there is
no enumeration done on the endpoint side.)
Thus, partly revert commit da92d3dfc871 ("arm64: dts: rockchip: enable the
mmu600_pcie IOMMU on the rk3588 SoC") by disabling the PCI IOMMU when
running the pcie3x4 PCIe controller in Endpoint mode.
Since the PCI IOMMU is working as expected in the normal case, keep it
enabled when running all PCIe controllers in Root Complex mode.
Fixes: da92d3dfc871 ("arm64: dts: rockchip: enable the mmu600_pcie IOMMU on the rk3588 SoC") Signed-off-by: Niklas Cassel <cassel@kernel.org> Acked-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20250207143900.2047949-2-cassel@kernel.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Rob Herring (Arm) [Mon, 3 Feb 2025 21:30:56 +0000 (15:30 -0600)]
dt-bindings: rockchip: pmu: Ensure all properties are defined
Device specific schemas should not allow undefined properties which is
what 'additionalProperties: true' allows. Add the missing child nodes
and fix this constraint.
Linus Torvalds [Sun, 9 Feb 2025 18:05:32 +0000 (10:05 -0800)]
Merge tag 'kbuild-fixes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Suppress false-positive -Wformat-{overflow,truncation}-non-kprintf
warnings regardless of the W= option
- Avoid CONFIG_TRIM_UNUSED_KSYMS dropping symbols passed to symbol_get()
- Fix a build regression of the Debian linux-headers package
* tag 'kbuild-fixes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: install-extmod-build: add missing quotation marks for CC variable
kbuild: fix misspelling in scripts/Makefile.lib
kbuild: keep symbols for symbol_get() even with CONFIG_TRIM_UNUSED_KSYMS
scripts/Makefile.extrawarn: Do not show clang's non-kprintf warnings at W=1
Linus Torvalds [Sun, 9 Feb 2025 17:47:06 +0000 (09:47 -0800)]
Merge tag 'pm-6.14-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a recently introduced kernel crash due to a NULL pointer
dereference during system-wide suspend (Rafael Wysocki)"
* tag 'pm-6.14-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: core: Restrict power.set_active propagation
Linus Torvalds [Sun, 9 Feb 2025 17:41:38 +0000 (09:41 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Correctly clean the BSS to the PoC before allowing EL2 to access it
on nVHE/hVHE/protected configurations
- Propagate ownership of debug registers in protected mode after the
rework that landed in 6.14-rc1
- Stop pretending that we can run the protected mode without a GICv3
being present on the host
- Fix a use-after-free situation that can occur if a vcpu fails to
initialise the NV shadow S2 MMU contexts
- Always evaluate the need to arm a background timer for fully
emulated guest timers
- Fix the emulation of EL1 timers in the absence of FEAT_ECV
- Correctly handle the EL2 virtual timer, specially when HCR_EL2.E2H==0
s390:
- move some of the guest page table (gmap) logic into KVM itself,
inching towards the final goal of completely removing gmap from the
non-kvm memory management code.
As an initial set of cleanups, move some code from mm/gmap into kvm
and start using __kvm_faultin_pfn() to fault-in pages as needed;
but especially stop abusing page->index and page->lru to aid in the
pgdesc conversion.
x86:
- Add missing check in the fix to defer starting the huge page
recovery vhost_task
- SRSO_USER_KERNEL_NO does not need SYNTHESIZED_F"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (31 commits)
KVM: x86/mmu: Ensure NX huge page recovery thread is alive before waking
KVM: remove kvm_arch_post_init_vm
KVM: selftests: Fix spelling mistake "initally" -> "initially"
kvm: x86: SRSO_USER_KERNEL_NO is not synthesized
KVM: arm64: timer: Don't adjust the EL2 virtual timer offset
KVM: arm64: timer: Correctly handle EL1 timer emulation when !FEAT_ECV
KVM: arm64: timer: Always evaluate the need for a soft timer
KVM: arm64: Fix nested S2 MMU structures reallocation
KVM: arm64: Fail protected mode init if no vgic hardware is present
KVM: arm64: Flush/sync debug state in protected mode
KVM: s390: selftests: Streamline uc_skey test to issue iske after sske
KVM: s390: remove the last user of page->index
KVM: s390: move PGSTE softbits
KVM: s390: remove useless page->index usage
KVM: s390: move gmap_shadow_pgt_lookup() into kvm
KVM: s390: stop using lists to keep track of used dat tables
KVM: s390: stop using page->index for non-shadow gmaps
KVM: s390: move some gmap shadowing functions away from mm/gmap.c
KVM: s390: get rid of gmap_translate()
KVM: s390: get rid of gmap_fault()
...
Commit 3775fc538f53 ("PM: sleep: core: Synchronize runtime PM status of
parents and children") exposed an issue related to simple_pm_bus_pm_ops
that uses pm_runtime_force_suspend() and pm_runtime_force_resume() as
bus type PM callbacks for the noirq phases of system-wide suspend and
resume.
The problem is that pm_runtime_force_suspend() does not distinguish
runtime-suspended devices from devices for which runtime PM has never
been enabled, so if it sees a device with runtime PM status set to
RPM_ACTIVE, it will assume that runtime PM is enabled for that device
and so it will attempt to suspend it with the help of its runtime PM
callbacks which may not be ready for that. As it turns out, this
causes simple_pm_bus_runtime_suspend() to crash due to a NULL pointer
dereference.
Another problem related to the above commit and simple_pm_bus_pm_ops is
that setting runtime PM status of a device handled by the latter to
RPM_ACTIVE will actually prevent it from being resumed because
pm_runtime_force_resume() only resumes devices with runtime PM status
set to RPM_SUSPENDED.
To mitigate these issues, do not allow power.set_active to propagate
beyond the parent of the device with DPM_FLAG_SMART_SUSPEND set that
will need to be resumed, which should be a sufficient stop-gap for the
time being, but they will need to be properly addressed in the future
because in general during system-wide resume it is necessary to resume
all devices in a dependency chain in which at least one device is going
to be resumed.
Fixes: 3775fc538f53 ("PM: sleep: core: Synchronize runtime PM status of parents and children") Closes: https://lore.kernel.org/linux-pm/1c2433d4-7e0f-4395-b841-b8eac7c25651@nvidia.com/ Reported-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/6137505.lOV4Wx5bFT@rjwysocki.net
Linus Torvalds [Sat, 8 Feb 2025 22:12:17 +0000 (14:12 -0800)]
Merge tag 'hardening-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
"Address a KUnit stack initialization regression that got tickled on
m68k, and solve a Clang(v14 and earlier) bug found by 0day:
- Fix stackinit KUnit regression on m68k
- Use ARRAY_SIZE() for memtostr*()/strtomem*()"
* tag 'hardening-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
string.h: Use ARRAY_SIZE() for memtostr*()/strtomem*()
compiler.h: Introduce __must_be_byte_array()
compiler.h: Move C string helpers into C-only kernel section
stackinit: Fix comment for test_small_end
stackinit: Keep selftest union size small on m68k
Linus Torvalds [Sat, 8 Feb 2025 22:04:21 +0000 (14:04 -0800)]
Merge tag 'seccomp-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp fix from Kees Cook:
"This is really a work-around for x86_64 having grown a syscall to
implement uretprobe, which has caused problems since v6.11.
This may change in the future, but for now, this fixes the unintended
seccomp filtering when uretprobe switched away from traps, and does so
with something that should be easy to backport.
- Allow uretprobe on x86_64 to avoid behavioral complications (Eyal
Birger)"
* tag 'seccomp-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: validate uretprobe syscall passes through seccomp
seccomp: passthrough uretprobe systemcall without filtering
Linus Torvalds [Sat, 8 Feb 2025 21:59:24 +0000 (13:59 -0800)]
Merge tag 'execve-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve fix from Kees Cook:
"This is an alpha-specific fix, but since it touched ELF I was asked to
carry it.
- alpha/elf: Fix misc/setarch test of util-linux by removing 32bit
support (Eric W. Biederman)"
* tag 'execve-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
alpha/elf: Fix misc/setarch test of util-linux by removing 32bit support
Linus Torvalds [Sat, 8 Feb 2025 21:45:34 +0000 (13:45 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"A number of fairly small fixes, mostly in drivers but two in the core
to change a retry for depopulation (a trendy new hdd thing that
reorganizes blocks away from failing elements) and one to fix a GFP_
annotation to avoid a lock dependency (the third core patch is all in
testing)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla1280: Fix kernel oops when debug level > 2
scsi: ufs: core: Fix error return with query response
scsi: storvsc: Set correct data length for sending SCSI command without payload
scsi: ufs: core: Fix use-after free in init error and remove paths
scsi: core: Do not retry I/Os during depopulation
scsi: core: Use GFP_NOIO to avoid circular locking dependency
scsi: ufs: Fix toggling of clk_gating.state when clock gating is not allowed
scsi: ufs: core: Ensure clk_gating.lock is used only after initialization
scsi: ufs: core: Simplify temperature exception event handling
scsi: target: core: Add line break to status show
scsi: ufs: core: Fix the HIGH/LOW_TEMP Bit Definitions
scsi: core: Add passthrough tests for success and no failure definitions
Linus Torvalds [Sat, 8 Feb 2025 20:22:21 +0000 (12:22 -0800)]
Merge tag 'rust-fixes-6.14' of https://github.com/Rust-for-Linux/linux
Pull rust fixes from Miguel Ojeda:
- Do not export KASAN ODR symbols to avoid gendwarfksyms warnings
- Fix future Rust 1.86.0 (to be released 2025-04-03) x86_64 builds
- Clean future Rust 1.86.0 (to be released 2025-04-03) warning
- Fix future GCC 15 (to be released in a few months) builds
- Fix `rusttest` target in macOS
* tag 'rust-fixes-6.14' of https://github.com/Rust-for-Linux/linux:
x86: rust: set rustc-abi=x86-softfloat on rustc>=1.86.0
rust: kbuild: do not export generated KASAN ODR symbols
rust: kbuild: add -fzero-init-padding-bits to bindgen_skip_cflags
rust: init: use explicit ABI to clean warning in future compilers
rust: kbuild: use host dylib naming in rusttestlib-kernel
Linus Torvalds [Sat, 8 Feb 2025 20:18:02 +0000 (12:18 -0800)]
Merge tag 'ftrace-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace fix from Steven Rostedt:
"Function graph fix of notrace functions.
When the function graph tracer was restructured to use the global
section of the meta data in the shadow stack, the bit logic was
changed. There's a TRACE_GRAPH_NOTRACE_BIT that is the bit number in
the mask that tells if the function graph tracer is currently in the
"notrace" mode. The TRACE_GRAPH_NOTRACE is the mask with that bit set.
But when the code we restructured, the TRACE_GRAPH_NOTRACE_BIT was
used when it should have been the TRACE_GRAPH_NOTRACE mask. This made
notrace not work properly"
* tag 'ftrace-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fgraph: Fix set_graph_notrace with setting TRACE_GRAPH_NOTRACE_BIT
Linus Torvalds [Sat, 8 Feb 2025 20:04:00 +0000 (12:04 -0800)]
Merge tag 'x86-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix a build regression on GCC 15 builds, caused by GCC changing the
default C version that is overriden in the main Makefile but not in
the x86 boot code Makefile"
* tag 'x86-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Use '-std=gnu11' to fix build with GCC 15
Linus Torvalds [Sat, 8 Feb 2025 19:55:03 +0000 (11:55 -0800)]
Merge tag 'timers-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Fix a PREEMPT_RT bug in the clocksource verification code that caused
false positive warnings.
Also fix a timer migration setup bug when new CPUs are added"
* tag 'timers-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/migration: Fix off-by-one root mis-connection
clocksource: Use migrate_disable() to avoid calling get_random_u32() in atomic context
Linus Torvalds [Sat, 8 Feb 2025 19:16:22 +0000 (11:16 -0800)]
Merge tag 'sched-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Fix a cfs_rq->h_nr_runnable accounting bug that trips up a defensive
SCHED_WARN_ON() on certain workloads. The bug is believed to be
(accidentally) self-correcting, hence no behavioral side effects are
expected.
Also print se.slice in debug output, since this value can now be set
via the syscall ABI and can be useful to track"
* tag 'sched-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/debug: Provide slice length for fair tasks
sched/fair: Fix inaccurate h_nr_runnable accounting with delayed dequeue
Linus Torvalds [Sat, 8 Feb 2025 19:05:54 +0000 (11:05 -0800)]
Merge tag 'irq-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"Another followup fix for the procps genirq output formatting
regression caused by an optimization"
* tag 'irq-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Remove leading space from irq_chip::irq_print_chip() callbacks
Linus Torvalds [Sat, 8 Feb 2025 18:54:11 +0000 (10:54 -0800)]
Merge tag 'locking-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
"Fix a dangling pointer bug in the futex code used by the uring code.
It isn't causing problems at the moment due to uring ABI limitations
leaving it essentially unused in current usages, but is a good idea to
fix nevertheless"
* tag 'locking-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Pass in task to futex_queue()
Steven Rostedt [Sat, 8 Feb 2025 05:15:11 +0000 (00:15 -0500)]
fgraph: Fix set_graph_notrace with setting TRACE_GRAPH_NOTRACE_BIT
The code was restructured where the function graph notrace code, that
would not trace a function and all its children is done by setting a
NOTRACE flag when the function that is not to be traced is hit.
There's a TRACE_GRAPH_NOTRACE_BIT which defines the bit in the flags and a
TRACE_GRAPH_NOTRACE which is the mask with that bit set. But the
restructuring used TRACE_GRAPH_NOTRACE_BIT when it should have used
TRACE_GRAPH_NOTRACE.
Nathan Chancellor [Thu, 17 Oct 2024 17:09:22 +0000 (10:09 -0700)]
kbuild: Move -Wenum-enum-conversion to W=2
-Wenum-enum-conversion was strengthened in clang-19 to warn for C, which
caused the kernel to move it to W=1 in commit 75b5ab134bb5 ("kbuild:
Move -Wenum-{compare-conditional,enum-conversion} into W=1") because
there were numerous instances that would break builds with -Werror.
Unfortunately, this is not a full solution, as more and more developers,
subsystems, and distributors are building with W=1 as well, so they
continue to see the numerous instances of this warning.
Since the move to W=1, there have not been many new instances that have
appeared through various build reports and the ones that have appeared
seem to be following similar existing patterns, suggesting that most
instances of this warning will not be real issues. The only alternatives
for silencing this warning are adding casts (which is generally seen as
an ugly practice) or refactoring the enums to macro defines or a unified
enum (which may be undesirable because of type safety in other parts of
the code).
Move the warning to W=2, where warnings that occur frequently but may be
relevant should reside.
Linus Torvalds [Sat, 8 Feb 2025 03:23:06 +0000 (19:23 -0800)]
Merge tag 'v6.14rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Three DFS fixes: DFS mount fix, fix for noisy log msg and one to
remove some unused code
- SMB3 Lease fix
* tag 'v6.14rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: change lease epoch type from unsigned int to __u16
smb: client: get rid of kstrdup() in get_ses_refpath()
smb: client: fix noisy when tree connecting to DFS interlink targets
smb: client: don't trust DFSREF_STORAGE_SERVER bit
Linus Torvalds [Fri, 7 Feb 2025 20:21:54 +0000 (12:21 -0800)]
Merge tag 'drm-fixes-2025-02-08' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Just regular drm fixes, amdgpu, xe and i915 mostly, but a few
scattered fixes. I think one of the i915 fixes fixes some build combos
that Guenter was seeing.
amdgpu:
- Add new tiling flag for DCC write compress disable
- Add BO metadata flag for DCC
- Fix potential out of bounds access in display
- Seamless boot fix
- CONFIG_FRAME_WARN fix
- PSR1 fix
xe:
- OA uAPI related fixes
- Fix SRIOV migration initialization
- Restore devcoredump to a sane state
i915:
- Fix the build error with clamp after WARN_ON on gcc 13.x+
- HDCP related fixes
- PMU fix zero delta busyness issue
- Fix page cleanup on DMA remap failure
- Drop 64bpp YUV formats from ICL+ SDR planes
- GuC log related fix
- DisplayPort related fixes
ivpu:
- Fix error handling
komeda:
- add return check
zynqmp:
- fix locking in DP code
ast:
- fix AST DP timeout
cec:
- fix broken CEC adapter check"
* tag 'drm-fixes-2025-02-08' of https://gitlab.freedesktop.org/drm/kernel: (29 commits)
drm/i915/dp: Fix potential infinite loop in 128b/132b SST
Revert "drm/amd/display: Use HW lock mgr for PSR1"
drm/amd/display: Respect user's CONFIG_FRAME_WARN more for dml files
accel/amdxdna: Add MODULE_FIRMWARE() declarations
drm/i915/dp: Iterate DSC BPP from high to low on all platforms
drm/xe: Fix and re-enable xe_print_blob_ascii85()
drm/xe/devcoredump: Move exec queue snapshot to Contexts section
drm/xe/oa: Set stream->pollin in xe_oa_buffer_check_unlocked
drm/xe/pf: Fix migration initialization
drm/xe/oa: Preserve oa_ctrl unused bits
drm/amd/display: Fix seamless boot sequence
drm/amd/display: Fix out-of-bound accesses
drm/amdgpu: add a BO metadata flag to disable write compression for Vulkan
drm/i915/backlight: Return immediately when scale() finds invalid parameters
drm/i915/dp: Return min bpc supported by source instead of 0
drm/i915/dp: fix the Adaptive sync Operation mode for SDP
drm/i915/guc: Debug print LRC state entries only if the context is pinned
drm/i915: Drop 64bpp YUV formats from ICL+ SDR planes
drm/i915: Fix page cleanup on DMA remap failure
drm/i915/pmu: Fix zero delta busyness issue
...
Linus Torvalds [Fri, 7 Feb 2025 19:00:33 +0000 (11:00 -0800)]
Merge tag 'block-6.14-20250207' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- MD pull request via Song:
- fix an error handling path for md-linear
- NVMe pull request via Keith:
- Connection fixes for fibre channel transport (Daniel)
- Endian fixes (Keith, Christoph)
- Cleanup fix for host memory buffer (Francis)
- Platform specific power quirks (Georg)
- Target memory leak (Sagi)
- Use appropriate controller state accessor (Daniel)
- Fixup for a regression introduced last week, where sunvdc wasn't
updated for an API change, causing compilation failures on sparc64.
* tag 'block-6.14-20250207' of git://git.kernel.dk/linux:
drivers/block/sunvdc.c: update the correct AIP call
md: Fix linear_set_limits()
nvme-fc: use ctrl state getter
nvme: make nvme_tls_attrs_group static
nvmet: add a missing endianess conversion in nvmet_execute_admin_connect
nvmet: the result field in nvmet_alloc_ctrl_args is little endian
nvmet: fix a memory leak in controller identify
nvme-fc: do not ignore connectivity loss during connecting
nvme: handle connectivity loss in nvme_set_queue_count
nvme-fc: go straight to connecting state when initializing
nvme-pci: Add TUXEDO IBP Gen9 to Samsung sleep quirk
nvme-pci: Add TUXEDO InfinityFlex to Samsung sleep quirk
nvme-pci: remove redundant dma frees in hmb
nvmet: fix rw control endian access
WangYuli [Fri, 7 Feb 2025 07:08:55 +0000 (15:08 +0800)]
kbuild: install-extmod-build: add missing quotation marks for CC variable
While attempting to build a Debian packages with CC="ccache gcc", I
saw the following error as builddeb builds linux-headers-$KERNELVERSION:
make HOSTCC=ccache gcc VPATH= srcroot=. -f ./scripts/Makefile.build obj=debian/linux-headers-6.14.0-rc1/usr/src/linux-headers-6.14.0-rc1/scripts
make[6]: *** No rule to make target 'gcc'. Stop.
Upon investigation, it seems that one instance of $(CC) variable reference
in ./scripts/package/install-extmod-build was missing quotation marks,
causing the above error.
Add the missing quotation marks around $(CC) to fix build.
Linus Torvalds [Fri, 7 Feb 2025 18:34:50 +0000 (10:34 -0800)]
Merge tag 'pm-6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a handful of issues in the amd-pstate driver, the airoha
cpufreq driver build, a (recently added) possible NULL pointer
dereference in the cpufreq code and a possible memory leak in the
power capping subsystem:
- Fix cpufreq_policy reference counting and prevent max_perf from
going above the current limit in amd-pstate, and drop a redundant
goto label from it (Dhananjay Ugwekar)
- Prevent the per-policy boost_enabled flag in amd-pstate from
getting out of sync with the actual state after boot failures
(Lifeng Zheng)
- Fix a recently added possible NULL pointer dereference in the
cpufreq core (Aboorva Devarajan)
- Fix a build issue related to CONFIG_OF and COMPILE_TEST
dependencies in the airoha cpufreq driver (Arnd Bergmann)
- Fix a possible memory leak in the power capping subsystem (Joe
Hattori)"
* tag 'pm-6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate: Fix cpufreq_policy ref counting
cpufreq: prevent NULL dereference in cpufreq_online()
cpufreq: airoha: modify CONFIG_OF dependency
cpufreq/amd-pstate: Fix max_perf updation with schedutil
cpufreq/amd-pstate: Remove the goto label in amd_pstate_update_limits
cpufreq/amd-pstate: Fix per-policy boost flag incorrect when fail
powercap: call put_device() on an error path in powercap_register_control_type()
Linus Torvalds [Fri, 7 Feb 2025 17:50:33 +0000 (09:50 -0800)]
Merge tag 'gpio-fixes-for-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix interrupt support in gpio-pca953x
- fix configfs attribute locking in gpio-sim
- limit the visibility of the GPIO_GRGPIO Kconfig symbol to OF systems
only
- update MAINTAINERS
* tag 'gpio-fixes-for-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: Use my kernel.org address for ACPI GPIO work
gpio: GPIO_GRGPIO should depend on OF
gpio: sim: lock hog configfs items if present
gpio: pca953x: Improve interrupt support
Linus Torvalds [Fri, 7 Feb 2025 17:22:31 +0000 (09:22 -0800)]
Merge tag 'vfs-6.14-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix fsnotify FMODE_NONOTIFY* handling.
This also disables fsnotify on all pseudo files by default apart from
very select exceptions. This carries a regression risk so we need to
watch out and adapt accordingly. However, it is overall a significant
improvement over the current status quo where every rando file can
get fsnotify enabled.
- Cleanup and simplify lockref_init() after recent lockref changes.
- Fix vboxfs build with gcc-15.
- Add an assert into inode_set_cached_link() to catch corrupt links.
- Allow users to also use an empty string check to detect whether a
given mount option string was empty or not.
- Fix how security options were appended to statmount()'s ->mnt_opt
field.
- Fix statmount() selftests to always check the returned mask.
- Fix uninitialized value in vfs_statx_path().
- Fix pidfs_ioctl() sanity checks to guard against ioctl() overloading
and preserve extensibility.
* tag 'vfs-6.14-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
vfs: sanity check the length passed to inode_set_cached_link()
pidfs: improve ioctl handling
fsnotify: disable pre-content and permission events by default
selftests: always check mask returned by statmount(2)
fsnotify: disable notification by default for all pseudo files
fs: fix adding security options to statmount.mnt_opt
fsnotify: use accessor to set FMODE_NONOTIFY_*
lockref: remove count argument of lockref_init
gfs2: switch to lockref_init(..., 1)
gfs2: use lockref_init for gl_lockref
statmount: let unset strings be empty
vboxsf: fix building with GCC 15
fs/stat.c: avoid harmless garbage value problem in vfs_statx_path()
Linus Torvalds [Fri, 7 Feb 2025 17:16:07 +0000 (09:16 -0800)]
Merge tag 'bcachefs-2025-02-06.2' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Nothing major, things continue to be fairly quiet over here.
- add a SubmittingPatches to clarify that patches submitted for
bcachefs do, in fact, need to be tested
- discard path now correctly issues journal flushes when needed, this
fixes performance issues when the filesystem is nearly full and
we're bottlenecked on copygc
- fix a bug that could cause the pending rebalance work accounting to
be off when devices are being onlined/offlined; users should report
if they are still seeing this
- and a few more trivial ones"
* tag 'bcachefs-2025-02-06.2' of git://evilpiepirate.org/bcachefs:
bcachefs: bch2_bkey_sectors_need_rebalance() now only depends on bch_extent_rebalance
bcachefs: Fix rcu imbalance in bch2_fs_btree_key_cache_exit()
bcachefs: Fix discard path journal flushing
bcachefs: fix deadlock in journal_entry_open()
bcachefs: fix incorrect pointer check in __bch2_subvolume_delete()
bcachefs docs: SubmittingPatches.rst
Hector Martin [Thu, 6 Feb 2025 18:21:46 +0000 (03:21 +0900)]
MAINTAINERS: Remove myself
I no longer have any faith left in the kernel development process or
community management approach.
Apple/ARM platform development will continue downstream. If I feel like
sending some patches upstream in the future myself for whatever subtree
I may, or I may not. Anyone who feels like fighting the upstreaming
fight themselves is welcome to do so.
Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rafael J. Wysocki [Fri, 7 Feb 2025 12:06:31 +0000 (13:06 +0100)]
Merge branches 'acpi-property' and 'acpi-resource'
Merge a new ACPI IRQ override quirk for Eluktronics MECH-17 (Gannon
Kolding) and an acpi_data_prop_read() fix making it reflect the OF
counterpart behavior in error cases (Andy Shevchenko).
* acpi-property:
ACPI: property: Fix return value for nval == 0 in acpi_data_prop_read()
* acpi-resource:
ACPI: resource: IRQ override for Eluktronics MECH-17
Mateusz Guzik [Tue, 4 Feb 2025 21:32:07 +0000 (22:32 +0100)]
vfs: sanity check the length passed to inode_set_cached_link()
This costs a strlen() call when instatianating a symlink.
Preferably it would be hidden behind VFS_WARN_ON (or compatible), but
there is no such facility at the moment. With the facility in place the
call can be patched out in production kernels.
In the meantime, since the cost is being paid unconditionally, use the
result to a fixup the bad caller.
This is not expected to persist in the long run (tm).
Sample splat:
bad length passed for symlink [/tmp/syz-imagegen43743633/file0/file0] (got 131109, expected 37)
[rest of WARN blurp goes here]
Christian Brauner [Tue, 4 Feb 2025 13:51:20 +0000 (14:51 +0100)]
pidfs: improve ioctl handling
Pidfs supports extensible and non-extensible ioctls. The extensible
ioctls need to check for the ioctl number itself not just the ioctl
command otherwise both backward- and forward compatibility are broken.
The pidfs ioctl handler also needs to look at the type of the ioctl
command to guard against cases where "[...] a daemon receives some
random file descriptor from a (potentially less privileged) client and
expects the FD to be of some specific type, it might call ioctl() on
this FD with some type-specific command and expect the call to fail if
the FD is of the wrong type; but due to the missing type check, the
kernel instead performs some action that userspace didn't expect."
(cf. [1]]
Christian Brauner [Tue, 4 Feb 2025 10:25:45 +0000 (11:25 +0100)]
Merge patch series "Fix for huge faults regression"
Amir Goldstein <amir73il@gmail.com> says:
The two Fix patches have been tested by Alex together and each one
independently.
I also verified that they pass the LTP inoityf/fanotify tests.
* patches from https://lore.kernel.org/r/20250203223205.861346-1-amir73il@gmail.com:
fsnotify: disable pre-content and permission events by default
fsnotify: disable notification by default for all pseudo files
fsnotify: use accessor to set FMODE_NONOTIFY_*
Amir Goldstein [Mon, 3 Feb 2025 22:32:05 +0000 (23:32 +0100)]
fsnotify: disable pre-content and permission events by default
After introducing pre-content events, we had a regression related to
disabling huge faults on files that should never have pre-content events
enabled.
This happened because the default f_mode of allocated files (0) does
not disable pre-content events.
Pre-content events are disabled in file_set_fsnotify_mode_by_watchers()
but internal files may not get to call this helper.
Initialize f_mode to disable permission and pre-content events for all
files and if needed they will be enabled for the callers of
file_set_fsnotify_mode_by_watchers().
Fixes: 20bf82a898b6 ("mm: don't allow huge faults for files with pre content watches") Reported-by: Alex Williamson <alex.williamson@redhat.com> Closes: https://lore.kernel.org/linux-fsdevel/20250131121703.1e4d00a7.alex.williamson@redhat.com/ Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Link: https://lore.kernel.org/r/20250203223205.861346-4-amir73il@gmail.com Signed-off-by: Christian Brauner <brauner@kernel.org>
Miklos Szeredi [Wed, 29 Jan 2025 16:06:41 +0000 (17:06 +0100)]
selftests: always check mask returned by statmount(2)
STATMOUNT_MNT_OPTS can actually be missing if there are no options. This
is a change of behavior since 75ead69a7173 ("fs: don't let statmount return
empty strings").
The other checks shouldn't actually trigger, but add them for correctness
and for easier debugging if the test fails.
Amir Goldstein [Mon, 3 Feb 2025 22:32:04 +0000 (23:32 +0100)]
fsnotify: disable notification by default for all pseudo files
Most pseudo files are not applicable for fsnotify events at all,
let alone to the new pre-content events.
Disable notifications to all files allocated with alloc_file_pseudo()
and enable legacy inotify events for the specific cases of pipe and
socket, which have known users of inotify events.
Pre-content events are also kept disabled for sockets and pipes.
Amir Goldstein [Mon, 3 Feb 2025 22:32:03 +0000 (23:32 +0100)]
fsnotify: use accessor to set FMODE_NONOTIFY_*
The FMODE_NONOTIFY_* bits are a 2-bits mode. Open coding manipulation
of those bits is risky. Use an accessor file_set_fsnotify_mode() to
set the mode.
Rename file_set_fsnotify_mode() => file_set_fsnotify_mode_from_watchers()
to make way for the simple accessor name.
Christian Brauner [Thu, 30 Jan 2025 15:04:42 +0000 (16:04 +0100)]
Merge patch series "further lockref cleanups"
Andreas Gruenbacher <agruenba@redhat.com> says:
Here's an updated version with an additional comment saying that
lockref_init() initializes count to 1.
* patches from https://lore.kernel.org/r/20250130135624.1899988-1-agruenba@redhat.com:
lockref: remove count argument of lockref_init
gfs2: switch to lockref_init(..., 1)
gfs2: use lockref_init for gl_lockref
Andreas Gruenbacher [Thu, 30 Jan 2025 13:56:22 +0000 (14:56 +0100)]
gfs2: switch to lockref_init(..., 1)
In qd_alloc(), initialize the lockref count to 1 to cover the common
case. Compensate for that in gfs2_quota_init() by adjusting the count
back down to 0; this only occurs when mounting the filesystem rw.
Miklos Szeredi [Thu, 30 Jan 2025 12:15:00 +0000 (13:15 +0100)]
statmount: let unset strings be empty
Just like it's normal for unset values to be zero, unset strings should be
empty instead of containing random values.
It seems to be a typical mistake that the mask returned by statmount is not
checked, which can result in various bugs.
With this fix, these bugs are prevented, since it is highly likely that
userspace would just want to turn the missing mask case into an empty
string anyway (most of the recently found cases are of this type).
Brahmajit Das [Tue, 21 Jan 2025 16:26:48 +0000 (21:56 +0530)]
vboxsf: fix building with GCC 15
Building with GCC 15 results in build error
fs/vboxsf/super.c:24:54: error: initializer-string for array of ‘unsigned char’ is too long [-Werror=unterminated-string-initialization]
24 | static const unsigned char VBSF_MOUNT_SIGNATURE[4] = "\000\377\376\375";
| ^~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Due to GCC having enabled -Werror=unterminated-string-initialization[0]
by default. Separately initializing each array element of
VBSF_MOUNT_SIGNATURE to ensure NUL termination, thus satisfying GCC 15
and fixing the build error.
Su Hui [Sun, 19 Jan 2025 02:59:47 +0000 (10:59 +0800)]
fs/stat.c: avoid harmless garbage value problem in vfs_statx_path()
Clang static checker(scan-build) warning:
fs/stat.c:287:21: warning: The left expression of the compound assignment is
an uninitialized value. The computed value will also be garbage.
287 | stat->result_mask |= STATX_MNT_ID_UNIQUE;
| ~~~~~~~~~~~~~~~~~ ^
fs/stat.c:290:21: warning: The left expression of the compound assignment is
an uninitialized value. The computed value will also be garbage.
290 | stat->result_mask |= STATX_MNT_ID;
When vfs_getattr() failed because of security_inode_getattr(), 'stat' is
uninitialized. In this case, there is a harmless garbage problem in
vfs_statx_path(). It's better to return error directly when
vfs_getattr() failed, avoiding garbage value and more clearly.
Before attaching a new root to the old root, the children counter of the
new root is checked to verify that only the upcoming CPU's top group have
been connected to it. However since the recently added commit b729cc1ec21a
("timers/migration: Fix another race between hotplug and idle entry/exit")
this check is not valid anymore because the old root is pre-accounted
as a child to the new root. Therefore after connecting the upcoming
CPU's top group to the new root, the children count to be expected must
be 2 and not 1 anymore.
This omission results in the old root to not be connected to the new
root. Then eventually the system may run with more than one top level,
which defeats the purpose of a single idle migrator.
Also the old root is pre-accounted but not connected upon the new root
creation. But it can be connected to the new root later on. Therefore
the old root may be accounted twice to the new root. The propagation of
such overcommit can end up creating a double final top-level root with a
groupmask incorrectly initialized. Although harmless given that the final
top level roots will never have a parent to walk up to, this oddity
opportunistically reported the core issue:
Geert Uytterhoeven [Wed, 5 Feb 2025 14:22:56 +0000 (15:22 +0100)]
genirq: Remove leading space from irq_chip::irq_print_chip() callbacks
The space separator was factored out from the multiple chip name prints,
but several irq_chip::irq_print_chip() callbacks still print a leading
space. Remove the superfluous double spaces.
Dave Airlie [Fri, 7 Feb 2025 04:47:11 +0000 (14:47 +1000)]
Merge tag 'drm-misc-fixes-2025-02-06' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A couple of fixes for ivpu to error handling, komeda for format
handling, AST DP timeout fix when enabling the output, locking fix for
zynqmp DP support, tiled format handling in drm/client, and refcounting
fix for bochs
Kent Overstreet [Sun, 26 Jan 2025 02:29:45 +0000 (21:29 -0500)]
bcachefs: bch2_bkey_sectors_need_rebalance() now only depends on bch_extent_rebalance
Previously, bch2_bkey_sectors_need_rebalance() called
bch2_target_accepts_data(), checking whether the target is writable.
However, this means that adding or removing devices from a target would
change the value of bch2_bkey_sectors_need_rebalance() for an existing
extent; this needs to be invariant so that the extent trigger can
correctly maintain rebalance_work accounting.
Instead, check target_accepts_data() in io_opts_to_rebalance_opts(),
before creating the bch_extent_rebalance entry.
This fixes (one?) cause of rebalance_work accounting being off.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Mon, 27 Jan 2025 06:21:44 +0000 (01:21 -0500)]
bcachefs: Fix discard path journal flushing
The discard path is supposed to issue journal flushes when there's too
many buckets empty buckets that need a journal commit before they can be
written to again, but at some point this code seems to have been lost.
Bring it back with a new optimization to make sure we don't issue too
many journal flushes: the journal now tracks the sequence number of the
most recent flush in progress, which the discard path uses when deciding
which buckets need a journal flush.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Jeongjun Park [Sun, 2 Feb 2025 06:13:51 +0000 (15:13 +0900)]
bcachefs: fix deadlock in journal_entry_open()
In the previous commit b3d82c2f2761, code was added to prevent journal sequence
overflow. Among them, the code added to journal_entry_open() uses the
bch2_fs_fatal_err_on() function to handle errors.
However, __journal_res_get() , which calls journal_entry_open() , calls
journal_entry_open() while holding journal->lock , but bch2_fs_fatal_err_on()
internally tries to acquire journal->lock , which results in a deadlock.
So we need to add a locked helper to handle fatal errors even when the
journal->lock is held.
Fixes: b3d82c2f2761 ("bcachefs: Guard against journal seq overflow") Signed-off-by: Jeongjun Park <aha310510@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Jeongjun Park [Fri, 31 Jan 2025 16:20:31 +0000 (01:20 +0900)]
bcachefs: fix incorrect pointer check in __bch2_subvolume_delete()
For some unknown reason, checks on struct bkey_s_c_snapshot and struct
bkey_s_c_snapshot_tree pointers are missing.
Therefore, I think it would be appropriate to fix the incorrect pointer checking
through this patch.
Fixes: 4bd06f07bcb5 ("bcachefs: Fixes for snapshot_tree.master_subvol") Signed-off-by: Jeongjun Park <aha310510@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kees Cook [Wed, 5 Feb 2025 21:45:26 +0000 (13:45 -0800)]
string.h: Use ARRAY_SIZE() for memtostr*()/strtomem*()
The destination argument of memtostr*() and strtomem*() must be a
fixed-size char array at compile time, so there is no need to use
__builtin_object_size() (which is useful for when an argument is
either a pointer or unknown). Instead use ARRAY_SIZE(), which has the
benefit of working around a bug in Clang (fixed[1] in 15+) that got
__builtin_object_size() wrong sometimes.
Kees Cook [Wed, 5 Feb 2025 20:48:07 +0000 (12:48 -0800)]
compiler.h: Introduce __must_be_byte_array()
In preparation for adding stricter type checking to the str/mem*()
helpers, provide a way to check that a variable is a byte array
via __must_be_byte_array().
Suggested-by: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Kees Cook <kees@kernel.org>
Kees Cook [Wed, 5 Feb 2025 20:32:49 +0000 (12:32 -0800)]
compiler.h: Move C string helpers into C-only kernel section
The C kernel helpers for evaluating C Strings were positioned where they
were visible to assembly inclusion, which was not intended. Move them
into the kernel and C-only area of the header so future changes won't
confuse the assembler.
Fixes: d7a516c6eeae ("compiler.h: Fix undefined BUILD_BUG_ON_ZERO()") Fixes: 559048d156ff ("string: Check for "nonstring" attribute on strscpy() arguments") Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Kees Cook <kees@kernel.org>
Alice Ryhl [Mon, 3 Feb 2025 08:40:57 +0000 (08:40 +0000)]
x86: rust: set rustc-abi=x86-softfloat on rustc>=1.86.0
When using Rust on the x86 architecture, we are currently using the
unstable target.json feature to specify the compilation target. Rustc is
going to change how softfloat is specified in the target.json file on
x86, thus update generate_rust_target.rs to specify softfloat using the
new option.
Note that if you enable this parameter with a compiler that does not
recognize it, then that triggers a warning but it does not break the
build.
[ For future reference, this solves the following error:
RUSTC L rust/core.o
error: Error loading target specification: target feature
`soft-float` is incompatible with the ABI but gets enabled in
target spec. Run `rustc --print target-list` for a list of
built-in targets
Eyal Birger [Sun, 2 Feb 2025 16:29:21 +0000 (08:29 -0800)]
selftests/seccomp: validate uretprobe syscall passes through seccomp
The uretprobe syscall is implemented as a performance enhancement on
x86_64 by having the kernel inject a call to it on function exit; User
programs cannot call this system call explicitly.
As such, this syscall is considered a kernel implementation detail and
should not be filtered by seccomp.
Enhance the seccomp bpf test suite to check that uretprobes can be
attached to processes without the killing the process regardless of
seccomp policy.
Eyal Birger [Sun, 2 Feb 2025 16:29:20 +0000 (08:29 -0800)]
seccomp: passthrough uretprobe systemcall without filtering
When attaching uretprobes to processes running inside docker, the attached
process is segfaulted when encountering the retprobe.
The reason is that now that uretprobe is a system call the default seccomp
filters in docker block it as they only allow a specific set of known
syscalls. This is true for other userspace applications which use seccomp
to control their syscall surface.
Since uretprobe is a "kernel implementation detail" system call which is
not used by userspace application code directly, it is impractical and
there's very little point in forcing all userspace applications to
explicitly allow it in order to avoid crashing tracked processes.
Pass this systemcall through seccomp without depending on configuration.
Note: uretprobe is currently only x86_64 and isn't expected to ever be
supported in i386.
Linus Torvalds [Thu, 6 Feb 2025 20:32:03 +0000 (12:32 -0800)]
Merge tag 'pci-v6.14-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- When saving a device's state, always save the upstream bridge's PM L1
Substates configuration as well because the bridge never saves its
own state, and restoring a device needs the state for both ends; this
was a regression that caused link and power management errors after
suspend/resume (Ilpo Järvinen)
- Correct TPH Control Register write, where we wrote the ST Mode where
the THP Requester Enable value was intended (Robin Murphy)
* tag 'pci-v6.14-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/TPH: Restore TPH Requester Enable correctly
PCI/ASPM: Fix L1SS saving
Linus Torvalds [Thu, 6 Feb 2025 20:25:35 +0000 (12:25 -0800)]
Merge tag 'for-linus-6.14-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Three fixes for xen_hypercall_hvm() that was introduced in the 6.13
cycle"
* tag 'for-linus-6.14-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: remove unneeded dummy push from xen_hypercall_hvm()
x86/xen: add FRAME_END to xen_hypercall_hvm()
x86/xen: fix xen_hypercall_hvm() to not clobber %rbx
Rafael J. Wysocki [Thu, 6 Feb 2025 19:39:43 +0000 (20:39 +0100)]
Merge tag 'amd-pstate-v6.14-2025-02-06' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge amd-pstate driver fixes for 6.14-rc2 from Mario Limonciello:
"* Fix some error cleanup paths with mutex use and boost
* Fix a ref counting issue
* Fix a schedutil issue"
* tag 'amd-pstate-v6.14-2025-02-06' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate: Fix cpufreq_policy ref counting
cpufreq/amd-pstate: Fix max_perf updation with schedutil
cpufreq/amd-pstate: Remove the goto label in amd_pstate_update_limits
cpufreq/amd-pstate: Fix per-policy boost flag incorrect when fail
Kees Cook [Tue, 4 Feb 2025 17:45:13 +0000 (09:45 -0800)]
stackinit: Keep selftest union size small on m68k
The stack frame on m68k is very sensitive to the size of what needs to
be stored. Like done for long string testing, reduce the size of the
large trailing struct in the union initialization testing.
Matthew Maurer [Wed, 22 Jan 2025 00:14:43 +0000 (00:14 +0000)]
rust: kbuild: do not export generated KASAN ODR symbols
ASAN generates special synthetic symbols to help check for ODR
violations. These synthetic symbols lack debug information, so
gendwarfksyms emits warnings when processing them. No code should ever
have a dependency on these symbols, so we should not be exporting them,
just like the __cfi symbols.
Linus Torvalds [Thu, 6 Feb 2025 17:14:54 +0000 (09:14 -0800)]
Merge tag 'net-6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Interestingly the recent kmemleak improvements allowed our CI to catch
a couple of percpu leaks addressed here.
We (mostly Jakub, to be accurate) are working to increase review
coverage over the net code-base tweaking the MAINTAINER entries.
Current release - regressions:
- core: harmonize tstats and dstats
- ipv6: fix dst refleaks in rpl, seg6 and ioam6 lwtunnels
- eth: tun: revert fix group permission check
- eth: stmmac: revert "specify hardware capability value when FIFO
size isn't specified"
Previous releases - regressions:
- udp: gso: do not drop small packets when PMTU reduces
- rxrpc: fix race in call state changing vs recvmsg()
- eth: ice: fix Rx data path for heavy 9k MTU traffic
- eth: vmxnet3: fix tx queue race condition with XDP
Previous releases - always broken:
- sched: pfifo_tail_enqueue: drop new packet when sch->limit == 0
- ethtool: ntuple: fix rss + ring_cookie check
- rxrpc: fix the rxrpc_connection attend queue handling
Misc:
- recognize Kuniyuki Iwashima as a maintainer"
* tag 'net-6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits)
Revert "net: stmmac: Specify hardware capability value when FIFO size isn't specified"
MAINTAINERS: add a sample ethtool section entry
MAINTAINERS: add entry for ethtool
rxrpc: Fix race in call state changing vs recvmsg()
rxrpc: Fix call state set to not include the SERVER_SECURING state
net: sched: Fix truncation of offloaded action statistics
tun: revert fix group permission check
selftests/tc-testing: Add a test case for qdisc_tree_reduce_backlog()
netem: Update sch->q.qlen before qdisc_tree_reduce_backlog()
selftests/tc-testing: Add a test case for pfifo_head_drop qdisc when limit==0
pfifo_tail_enqueue: Drop new packet when sch->limit == 0
selftests: mptcp: connect: -f: no reconnect
net: rose: lock the socket in rose_bind()
net: atlantic: fix warning during hot unplug
rxrpc: Fix the rxrpc_connection attend queue handling
net: harmonize tstats and dstats
selftests: drv-net: rss_ctx: don't fail reconfigure test if queue offset not supported
selftests: drv-net: rss_ctx: add missing cleanup in queue reconfigure
ethtool: ntuple: fix rss + ring_cookie check
ethtool: rss: fix hiding unsupported fields in dumps
...
Robin Murphy [Wed, 5 Feb 2025 12:52:13 +0000 (12:52 +0000)]
PCI/TPH: Restore TPH Requester Enable correctly
When we reenable TPH after changing a Steering Tag value, we need the
actual TPH Requester Enable value, not the ST Mode (which only happens to
work out by chance for non-extended TPH in interrupt vector mode).
Meetakshi Setiya [Thu, 6 Feb 2025 06:50:41 +0000 (01:50 -0500)]
smb: client: change lease epoch type from unsigned int to __u16
MS-SMB2 section 2.2.13.2.10 specifies that 'epoch' should be a 16-bit
unsigned integer used to track lease state changes. Change the data
type of all instances of 'epoch' from unsigned int to __u16. This
simplifies the epoch change comparisons and makes the code more
compliant with the protocol spec.
Cc: stable@vger.kernel.org Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com> Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Ilpo Järvinen [Fri, 31 Jan 2025 15:29:13 +0000 (17:29 +0200)]
PCI/ASPM: Fix L1SS saving
Commit 1db806ec06b7 ("PCI/ASPM: Save parent L1SS config in
pci_save_aspm_l1ss_state()") aimed to perform L1SS config save for both the
Upstream Port and its upstream bridge when handling an Upstream Port, which
matches what the L1SS restore side does. However, parent->state_saved can
be set true at an earlier time when the upstream bridge saved other parts
of its state. Then later when attempting to save the L1SS config while
handling the Upstream Port, parent->state_saved is true in
pci_save_aspm_l1ss_state() resulting in early return and skipping saving
bridge's L1SS config because it is assumed to be already saved. Later on
restore, junk is written into L1SS config which causes issues with some
devices.
Remove parent->state_saved check and unconditionally save L1SS config also
for the upstream bridge from an Upstream Port which ought to be harmless
from correctness point of view. With the Upstream Port check now present,
saving the L1SS config more than once for the bridge is no longer a problem
(unlike when the parent->state_saved check got introduced into the fix
during its development).
Link: https://lore.kernel.org/r/20250131152913.2507-1-ilpo.jarvinen@linux.intel.com Fixes: 1db806ec06b7 ("PCI/ASPM: Save parent L1SS config in pci_save_aspm_l1ss_state()") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219731 Reported-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Reported by: Rafael J. Wysocki <rafael@kernel.org> Closes: https://lore.kernel.org/r/CAJZ5v0iKmynOQ5vKSQbg1J_FmavwZE-nRONovOZ0mpMVauheWg@mail.gmail.com Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Closes: https://lore.kernel.org/r/d7246feb-4f3f-4d0c-bb64-89566b170671@molgen.mpg.de Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13 9360
Eric W. Biederman [Mon, 13 Jan 2025 05:39:01 +0000 (23:39 -0600)]
alpha/elf: Fix misc/setarch test of util-linux by removing 32bit support
Richard Henderson <richard.henderson@linaro.org> writes[1]:
> There was a Spec benchmark (I forget which) which was memory bound and ran
> twice as fast with 32-bit pointers.
>
> I copied the idea from DEC to the ELF abi, but never did all the other work
> to allow the toolchain to take advantage.
>
> Amusingly, a later Spec changed the benchmark data sets to not fit into a
> 32-bit address space, specifically because of this.
>
> I expect one could delete the ELF bit and personality and no one would
> notice. Not even the 10 remaining Alpha users.
In [2] it was pointed out that parts of setarch weren't working
properly on alpha because it has it's own SET_PERSONALITY
implementation. In the discussion that followed Richard Henderson
pointed out that the 32bit pointer support for alpha was never
completed.
Fix this by removing alpha's 32bit pointer support.
As a bit of paranoia refuse to execute any alpha binaries that have
the EF_ALPHA_32BIT flag set. Just in case someone somewhere has
binaries that try to use alpha's 32bit pointer support.
Russell King (Oracle) [Wed, 5 Feb 2025 12:57:47 +0000 (12:57 +0000)]
Revert "net: stmmac: Specify hardware capability value when FIFO size isn't specified"
This reverts commit 8865d22656b4, which caused breakage for platforms
which are not using xgmac2 or gmac4. Only these two cores have the
capability of providing the FIFO sizes from hardware capability fields
(which are provided in priv->dma_cap.[tr]x_fifo_size.)
All other cores can not, which results in these two fields containing
zero. We also have platforms that do not provide a value in
priv->plat->[tr]x_fifo_size, resulting in these also being zero.
This causes the new tests introduced by the reverted commit to fail,
and produce e.g.:
An example of such a platform which fails is QEMU's npcm750-evb.
This uses dwmac1000 which, as noted above, does not have the capability
to provide the FIFO sizes from hardware.
Therefore, revert the commit to maintain compatibility with the way
the driver used to work.
Jakub Kicinski [Tue, 4 Feb 2025 21:57:50 +0000 (13:57 -0800)]
MAINTAINERS: add a sample ethtool section entry
I feel like we don't do a good enough keeping authors of driver
APIs around. The ethtool code base was very nicely compartmentalized
by Michal. Establish a precedent of creating MAINTAINERS entries
for "sections" of the ethtool API. Use Andrew and cable test as
a sample entry. The entry should ideally cover 3 elements:
a core file, test(s), and keywords. The last one is important
because we intend the entries to cover core code *and* reviews
of drivers implementing given API!
Jakub Kicinski [Tue, 4 Feb 2025 21:57:29 +0000 (13:57 -0800)]
MAINTAINERS: add entry for ethtool
Michal did an amazing job converting ethtool to Netlink, but never
added an entry to MAINTAINERS for himself. Create a formal entry
so that we can delegate (portions) of this code to folks.
Over the last 3 years majority of the reviews have been done by
Andrew and I. I suppose Michal didn't want to be on the receiving
end of the flood of patches.
Vaishnav Achath [Wed, 5 Feb 2025 06:22:29 +0000 (11:52 +0530)]
arm64: defconfig: Enable TISCI Interrupt Router and Aggregator
Enable TISCI Interrupt Router and Interrupt Aggregator drivers.
These IPs are found in all TI K3 SoCs like J721E, AM62X and is required
for core functionality like DMA, GPIO Interrupts which is necessary
during boot, thus make them built-in.
These configs were previously selected for ARCH_K3 in respective Kconfigs
till commit b8b26ae398c4 ("irqchip/ti-sci-inta : Add module build support")
and commit 2d95ffaecbc2 ("irqchip/ti-sci-intr: Add module build support")
dropped them and few driver configs (TI_K3_UDMA, TI_K3_RINGACC)
dependent on these also got disabled due to this. While re-enabling the
TI_SCI_INT_*_IRQCHIP configs, these configs with missing dependencies
(which are already part of arm64 defconfig) also get re-enabled which
explains the slightly larger size increase from the bloat-o-meter summary.
Paulo Alcantara [Wed, 5 Feb 2025 16:41:32 +0000 (13:41 -0300)]
smb: client: get rid of kstrdup() in get_ses_refpath()
After commit 36008fe6e3dc ("smb: client: don't try following DFS links
in cifs_tree_connect()"), TCP_Server_Info::leaf_fullpath will no
longer be changed, so there is no need to kstrdup() it.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
projects / users / willy / pagecache.git / log