media: dt-bindings: sony,imx415: Allow props from video-interface-devices

All the properties described by video-interface-devices.yaml are
allowed for the image sensor, make them accepted by changing
"additionalProperties: false" to "unevaluatedProperties: false" at the
schema top-level.

Because all properties are now accepted, there is no need to explicitly
allow them in the schema.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: dt-bindings: sony,imx214: Allow props from video-interface-devices

All the properties described by video-interface-devices.yaml are
allowed for the image sensor, make them accepted by changing
"additionalProperties: false" to "unevaluatedProperties: false" at the
schema top-level.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: dt-bindings: ovti,ov5640: Allow props from video-interface-devices

There is no reason to restrict the allowed rotation degrees to 0 and 180,
as the sensor can be mounted with any rotation.

Also, as all the properties described by video-interface-devices.yaml are
allowed for the image sensor, make them accepted by changing
"additionalProperties: false" to "unevaluatedProperties: false" at the
schema top-level.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: dt-bindings: ovti,ov4689: Allow props from video-interface-devices

All the properties described by video-interface-devices.yaml are
allowed for the image sensor, make them accepted by changing
"additionalProperties: false" to "unevaluatedProperties: false" at the
schema top-level.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: dt-bindings: ovti,ov02a10: Allow props from video-interface-devices

There is no reason to restrict the allowed rotation degrees to 0 and 180,
as the sensor can be mounted with any rotation.

Also, as all the properties described by video-interface-devices.yaml are
allowed for the image sensor, make them accepted by changing
"additionalProperties: false" to "unevaluatedProperties: false" at the
schema top-level.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: dt-bindings: hynix,hi846: Add video-interface-devices properties

Allow properties from video-interface-devices.yaml for the SK Hynix Hi-846
sensor.

All properties specified in video-interface-devices.yaml schema are
valid, so make them accepted by changing "additionalProperties: false"
to "unevaluatedProperties: false" at the schema top-level.

Add two properties from video-interface-devices.yaml to the example
to validate the new schema.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: ti: Add CSI2RX support for J721E

TI's J721E uses the Cadence CSI2RX and DPHY peripherals to facilitate
capture over a CSI-2 bus.

The Cadence CSI2RX IP acts as a bridge between the TI specific parts and
the CSI-2 protocol parts. TI then has a wrapper on top of this bridge
called the SHIM layer. It takes in data from stream 0, repacks it, and
sends it to memory over PSI-L DMA.

This driver acts as the "front end" to V4L2 client applications. It
implements the required ioctls and buffer operations, passes the
necessary calls on to the bridge, programs the SHIM layer, and performs
DMA via the dmaengine API to finally return the data to a buffer
supplied by the application.

Co-developed-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Co-developed-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Tested-by: Vaishnav Achath <vaishnav.a@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: dt-bindings: Add TI J721E CSI2RX

TI's J721E uses the Cadence CSI2RX and DPHY peripherals to facilitate
capture over a CSI-2 bus. The TI CSI2RX platform driver glues all the
parts together.

Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: cadence: csi2rx: Add link validation

Add media link validation to make sure incorrectly configured pipelines
are caught.

Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: cadence: csi2rx: Populate subdev devnode

The devnode can be used by media-ctl and other userspace tools to
perform configurations on the subdev. Without it, media-ctl returns
ENOENT when setting format on the sensor subdev.

Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: cadence: csi2rx: Fix stream data configuration

Firstly, there is no VC_EN bit present in the STREAM_DATA_CFG register.
Bit 31 is part of the VL_SELECT field. Remove it completely.

Secondly, it makes little sense to enable ith virtual channel for ith
stream. Sure, there might be a use-case that demands it. But there might
also be a use case that demands all streams to use the 0th virtual
channel. Prefer this case over the former because it is less arbitrary
and also makes it very clear what the limitations of the current driver
is instead of giving a false impression that multiple virtual channels
are supported.

Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: cadence: csi2rx: Set the STOP bit when stopping a stream

The stream stop procedure says that the STOP bit should be set when the
stream is to be stopped, and then the ready bit in stream status
register polled to make sure the STOP operation is finished.

Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: cadence: csi2rx: Soft reset the streams before starting capture

This resets the stream state machines and FIFOs, giving them a clean
slate. On J721E if the streams are not reset before starting the
capture, the captured frame gets wrapped around vertically on every run
after the first.

Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: cadence: csi2rx: Configure DPHY using link freq

Some platforms like TI's J721E can have the CSI2RX paired with an
external DPHY. Use the generic PHY framework to configure the DPHY with
the correct link frequency.

Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Co-developed-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: cadence: csi2rx: Add get_fmt and set_fmt pad ops

The format is needed to calculate the link speed for the external DPHY
configuration. It is not right to query the format from the source
subdev. Add get_fmt and set_fmt pad operations so that the format can be
configured and correct bpp be selected.

Initialize and use the v4l2 subdev active state to keep track of the
active formats. Also propagate the new format from the sink pad to all
the source pads.

Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Co-developed-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: cadence: csi2rx: Cleanup media entity properly

Call media_entity_cleanup() in probe error path and remove to make sure
the media entity is cleaned up properly.

Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: cadence: csi2rx: Unregister v4l2 async notifier

The notifier is added to the global notifier list when registered. When
the module is removed, the struct csi2rx_priv in which the notifier is
embedded, is destroyed. As a result the notifier list has a reference to
a notifier that no longer exists. This causes invalid memory accesses
when the list is iterated over. Similar for when the probe fails.
Unregister and clean up the notifier to avoid this.

Fixes: 1fc3b37f34f6 ("media: v4l: cadence: Add Cadence MIPI-CSI2 RX driver")
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: dt-bindings: cadence-csi2rx: Add TI compatible string

Add a SoC-specific compatible string for TI's integration of this IP in
J7 and AM62 line of SoCs.

Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: dt-bindings: Make sure items in data-lanes are unique

The data-lanes property maps the logical lane numbers to the physical
lane numbers. The position of an entry is the logical lane number and
its value is the physical lane number. Since one physical lane can only
map to one logical lane, no number in the list should repeat. Add the
uniqueItems constraint on the property to enforce this.

Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: Documentation: ccs: Fix spelling mistake

Correct the wrong spelling of 'exposes' in the binner section.

Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

staging: media: ipu3: remove ftrace-like logging

This patch fixes the following checkpatch.pl warnings in ipu3.c:

WARNING: Unnecessary ftrace-like logging - prefer using ftrace
+       dev_dbg(dev, "enter %s\n", __func__);

WARNING: Unnecessary ftrace-like logging - prefer using ftrace
+       dev_dbg(dev, "leave %s\n", __func__);

WARNING: Unnecessary ftrace-like logging - prefer using ftrace
+       dev_dbg(dev, "enter %s\n", __func__);

WARNING: Unnecessary ftrace-like logging - prefer using ftrace
+       dev_dbg(dev, "leave %s\n", __func__);

Fixes: 7fc7af649ca7 ("media: staging/intel-ipu3: Add imgu top level pci device driver")
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: lirc: drop trailing space from scancode transmit

When transmitting, infrared drivers expect an odd number of samples; iow
without a trailing space. No problems have been observed so far, so
this is just belt and braces.

Fixes: 9b6192589be7 ("media: lirc: implement scancode sending")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: sharp: fix sharp encoding

The Sharp protocol[1] encoding has incorrect timings for bit space.

[1] https://www.sbprojects.net/knowledge/ir/sharp.php

Fixes: d35afc5fe097 ("[media] rc: ir-sharp-decoder: Add encode capability")
Cc: stable@vger.kernel.org
Reported-by: Joe Ferner <joe.m.ferner@gmail.com>
Closes: https://sourceforge.net/p/lirc/mailman/message/38604507/
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

staging: media: atomisp: improve unwinding

This fixes two smatch warnings:

drivers/staging/media/atomisp/pci/atomisp_cmd.c:2779 atomisp_cp_dvs_6axis_config() warn: missing unwind goto?
drivers/staging/media/atomisp/pci/atomisp_cmd.c:2878 atomisp_cp_morph_table() warn: missing unwind goto?

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
CC: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>

media: i2c: tc358746: check fmt validity

Check if the format was really found.

Fixes smatch warning:

drivers/media/i2c/tc358746.c:790 tc358746_set_fmt() error: 'fmt' dereferencing possible ERR_PTR()

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
CC: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>

staging: media: atomisp: drop check for reentrant .s_stream()

The subdev .s_stream() operation shall not be called to start streaming
on an already started subdev, or stop streaming on a stopped subdev.
Remove the check that guards against that condition.

Also fixes a smatch warning:

drivers/staging/media/atomisp/i2c/atomisp-gc0310.c:446 gc0310_s_stream() warn: missing error code 'ret'

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
CC: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>

media: imon: fix access to invalid resource for the second interface

imon driver probes two USB interfaces, and at the probe of the second
interface, the driver assumes blindly that the first interface got
bound with the same imon driver.  It's usually true, but it's still
possible that the first interface is bound with another driver via a
malformed descriptor.  Then it may lead to a memory corruption, as
spotted by syzkaller; imon driver accesses the data from drvdata as
struct imon_context object although it's a completely different one
that was assigned by another driver.

This patch adds a sanity check -- whether the first interface is
really bound with the imon driver or not -- for avoiding the problem
above at the probe time.

Reported-by: syzbot+59875ffef5cb9c9b29e9@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000a838aa0603cc74d6@google.com/
Tested-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20230922005152.163640-1-ricardo@marliere.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: rc: keymaps: add missing MODULE_DESCRIPTION to keymaps

When building the modules 'modpost' warns about missing MODULE_DESCRIPTION.

Since almost none of the rc keymap modules have this, it produces a lot of
warnings.

As a first step to fixing all media modules, add this line to all keymaps.
The description should be a human-readable string describing the remote
or the remote controller that the keymap can be used with.

Note that keymaps/rc-cec.c is actually compiled into the rc-core, so that
is the sole keymap source that didn't need this.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sean Young <sean@mess.org>

media: Documentation: Split camera sensor documentation

Split camera sensor documentation into user and kernel portions. This
should make it easier for the user space developers to find the relevant
documentation.

Also add a list of exemplary drivers and add imx219 driver to it, besides
those that were already mentioned.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: Add MIPI CSI-2 generic long packet type definition

Add a definition for MIPI CSI-2 generic long packet types. The generic
long packet types are numbered from 1 to 4.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: mc: Check pad flag validity

Check the validity of pad flags on entity init. Exactly one of the flags
must be set.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: v4l: subdev: Print debug information on frame descriptor

Print debug level information on returned frame descriptors.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: v4l: subdev: Clear frame descriptor before get_frame_desc

Clear frame descriptor before calling transmitter's get_frame_desc() op.
Also remove the corresponding memset() calls from drivers.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: ov2740: Return -EPROBE_DEFER if no endpoint is found

With ipu bridge, endpoints may only be created when ipu bridge has
initialised. This may happen after the sensor driver has first probed.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: ov2740: Use sub-device active state

Use sub-device active state. Rely on control handler lock to serialise
access to the active state. Also clean up locking on s_stream handler.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: ov2740: Enable runtime PM before registering the async subdev

Enable runtime PM before registering the async subdev as the driver UAPI
may become accessible immediately after the registration. Runtime PM needs
to be enabled by that time.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: ccs: Drop re-entrant s_stream support

The s_stream is called to enable and to disable streaming on a sub-device.
The caller may only call it to change the state, enabling streaming is not
allowed when it is already disabled, and similarly for disabling
streaming. Remove the check from the CCS driver.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: ccs: Partially revert "media: i2c: Use pm_runtime_resume_and_get()"

ccs_pm_get_init() depends on the return values > 0 of
pm_runtime_get_sync(), thus it can't use pm_runtime_resume_and_get().
There's even a comment in the driver on this, a few lines above the code.

Fixes: aa0adb399d09 ("media: i2c: Use pm_runtime_resume_and_get()")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: ccs: Use sub-device active state

Make use of sub-device active state. In most cases the effect on need for
acquiring the mutex is non-existent as access to the driver's core data
structure still needs to be serialised.

This still removes a lot of code as the code paths for active and try
state are the same in many cases.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: ccs: Obtain media bus formats before initialising up sub-devices

The available mbus codes will soon be needed earlier, at the time
sub-devices are initialisaed. This is due to calling init_cfg() op via the
v4l2_subdev_init_finalize().

Move ccs_get_mbus_formats() before ccs_init_subdev() calls.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: ccs: Move media_entity_pads_init to init from register

The media entity will soon need to be initialised before the sub-device
init finalisation that allocates memory for sub-device state. Do that now.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: ccs: Rename ccs_create_subdev as ccs_init_subdev

The ccs_create_subdev() function initialises a sub-device in the CCS
driver, including CCS specific needs. Rename it as ccs_init_subdev() as it
better reflects what the function does.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: ccs: Switch to init_cfg

Use init_cfg() instead of manually setting up defaults in file handle
open.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: ccs: Correct error handling in ccs_register_subdev

ccs_register_subdev() did not clean up the media entity in error case, do
that now. Also switch to goto based error handling.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: ccs: Correctly initialise try compose rectangle

Initialise the try sink compose rectangle size to the sink compose
rectangle for binner and scaler sub-devices. This was missed due to the
faulty condition that lead to the compose rectangles to be initialised for
the pixel array sub-device where it is not relevant.

Fixes: ccfc97bdb5ae ("[media] smiapp: Add driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: ccs: Fix driver quirk struct documentation

Fix documentation for struct ccs_quirk, a device specific struct for
managing deviations from the standard. The flags field was drifted away
from where it should have been.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: Documentation: Align numbered list, make it a proper ReST

Align lines for numbered list so that Sphinx produces an uniform output
for all list entries. Also indent paragraphs of such list entries for
consistency.

Also use ReST numbered list syntax for the entries.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: i2c: imx219: Move variables to inner scope

The exposure_max, exposure_def and hblank variables are only used in an
inner scope in the imx219_set_pad_format() function. Move them to that
scope to keep them closer to their usage and improve readability.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: i2c: imx219: Name all subdev state variables 'state'

Subdev state variables are named with a mix of 'state' and 'sd_state'
through the driver. To improve consistency, name them all 'state'.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: i2c: imx219: Calculate crop rectangle dynamically

Calculate the crop rectangle size and location dynamically when setting
the format, instead of storing it in the imx219_mode structure. This
removes duplicated information from the mode, to guarantee consistency.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: i2c: imx219: Separate horizontal and vertical binning

The IMX219 has distinct binning registers for the horizontal and
vertical directions. Calculate their value and write them separately.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: i2c: imx219: Implement .init_cfg() using .set_fmt()

Instead of duplicating the logical implemented in the .set_fmt()
operation in .init_cfg(), call .set_fmt() directly. This centralizes the
format and crop rectangle calculations in a single place.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: i2c: imx219: Remove unneeded goto

Simplify the imx219_set_stream() by removing an unneeded goto statement,
and its corresponding error label. The natural flow of the function is
correct.

While at it, drop a useless comment.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: i2c: imx219: Group functions by purpose

Move functions around to group them by purpose, in order to improve
readability. No functional change is intended.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: i2c: imx219: Drop IMX219_VTS_* macros

The IMX219_VTS_* macros define default VTS values for the modes
supported by the driver. They are used in a single place, and hinder
readability compared to using the value directly as a decimal number.
Drop them.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: i2c: imx219: Don't store the current mode in the imx219 structure

The mode field of the imx219 structure is only used in
imx219_init_controls(), after the probe function sets it to point to the
default mode. Use the default mode directly when initializing controls,
and drop the mode field from the imx219 structure.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: i2c: imx219: Access height from active format in imx219_set_ctrl

Use the active format height instead of the mode height in
imx219_set_ctrl(). This prepares for dropping the mode field from the
imx219 structure.

The state is retrieved using v4l2_subdev_get_locked_active_state() as
the subdev active state and the control handler share the same lock.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: i2c: imx219: Infer binning settings from format and crop

Compare the format and crop rectangle dimensions to infer binning
settings, instead of storing the binning mode in the imx219_mode
structure. This removes duplicate information from the mode.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: i2c: imx219: Use active crop rectangle to configure registers

Configure the crop-related registers from the values stored in the
active crop rectangle instead of the mode structure. This removes usage
of the mode from the imx219_set_framefmt(). No functional change is
intended.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: i2c: imx219: Initialize ycbcr_enc

While the ycbcr_enc field doesn't apply to raw formats, leaving it
uninitialized makes the driver behave in a less deterministic way. Fix
it by picking the default value for the colorspace.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: i2c: imx219: Merge format and binning setting functions

The imx219_set_binning() function sets registers based on the bpp value,
which is computed in imx219_set_framefmt(). As both functions are called
from the same place consecutively, and set registers based on the
selected mode, merge them together to simplify the code.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: i2c: imx219: Set mode registers programmatically

Replace the per-mode register arrays with code that sets the same
register values using the mode definitions. This avoids duplicating
information in two different places.

The error check for invalid formats in imx219_set_framefmt() is dropped
as the format is guaranteed to be valid.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: i2c: imx219: Fix test pattern window for 640x480 mode

The 640x480 mode specifies incorrect values for the TP_WINDOW_WIDTH and
TP_WINDOW_HEIGHT registers, which likely got copied from the 1640x1232
mode. They should be identical to the X_OUTPUT_SIZE and Y_OUTPUT_SIZE
registers as for all the other modes, to avoid cropping the test
pattern. Fix them.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: i2c: imx219: Drop IMX219_REG_CSI_LANE_MODE from common regs array

The IMX219_REG_CSI_LANE_MODE is configured twice, once with a hardcoded
value in the imx219_common_regs registers array, and once with the value
appropriate for the system in imx219_configure_lanes(). The latter is
enough, drop the former.

Fixes: ceddfd4493b3 ("media: i2c: imx219: Support four-lane operation")
Suggested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: i2c: imx219: Replace register addresses with macros

Define macros for all the known registers used in the register arrays,
and use them to replace the numerical addresses. This improves
readability.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: i2c: imx219: Drop unused macros

Drop a handful of macros that are not used and don't provide any value.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: i2c: imx219: Convert to CCI register access helpers

Use the new common CCI register access helpers to replace the private
register access helpers in the imx219 driver. This simplifies the driver
by reducing the amount of code.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: i2c: Add driver for onsemi MT9M114 camera sensor

The MT9M114 is a CMOS camera sensor that combines a 1296x976 pixel array
with a 10-bit dynamic range together with an internal ISP. The driver
exposes two subdevs, one for the pixel array and one for the ISP (named
IFP for Image Flow Processor). Major supported features are

- Full configuration of analog crop and binning in the pixel array
- Full configuration of scaling in the ISP
- Automatic exposure and white balance
- Manual exposure and analog gain
- Horizontal and vertical flip

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: dt-bindings: media: i2c: Add MT9M114 camera sensor binding

Add device tree binding for the onsemi MT9M114 CMOS camera sensor.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: i2c/hi556: add a new mode 1296x722 settings

Add a new mode - 16:9 resolution 1296x722 for hi556.

Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Qingwu Zhang <qingwu.zhang@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: imx334: Orphan the driver

The current maintainers won't be looking after this driver anymore. Mark
it orphan.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: imx335: Orphan the driver

The current maintainers won't be looking after this driver anymore. Mark
it orphan.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: imx412: Orphan the driver

The current maintainers won't be looking after this driver anymore. Mark
it orphan.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: ov9282: Assign maintenance to Dave

The current maintainers won't be looking after this driver anymore. Dave
offered to take over the driver, assign maintenance to him.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: platform: cros-ec: Add Taranza to the match table

Taranza has two HDMI ports which support CEC:
Port D is EC port 0
Port B is EC port 1

Signed-off-by: Ken Lin <ken_lin5@hotmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: platform: cros-ec: Rename conns array for the match table

Rename conns array to port_**_conns, ** is the ports which support cec.
ex: dibbi_conns support Port D and B will be renamed to port_db_conns.
Make it much cleaner and readable.

Signed-off-by: Ken Lin <ken_lin5@hotmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: dvb-frontends: drop check because i2c_unregister_device() is NULL safe

No need to check the argument of i2c_unregister_device() because the
function itself does it.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: i2c: drop check because i2c_unregister_device() is NULL safe

No need to check the argument of i2c_unregister_device() because the
function itself does it.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: cedrus: Fix clock/reset sequence

According to H6 user manual, resets should always be de-asserted before
clocks are enabled. This is also consistent with vendor driver.

Fixes: d5aecd289bab ("media: cedrus: Implement runtime PM")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: visl: use canonical ftrace path

The canonical location for the tracefs filesystem is at
/sys/kernel/tracing.

But, from Documentation/trace/ftrace.rst:

  Before 4.1, all ftrace tracing control files were within the debugfs
  file system, which is typically located at /sys/kernel/debug/tracing.
  For backward compatibility, when mounting the debugfs file system,
  the tracefs file system will be automatically mounted at:

  /sys/kernel/debug/tracing

Update the visl decoder driver documentation to use this tracefs path.

Signed-off-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: vidtv: mux: Add check and kfree for kstrdup

Add check for the return value of kstrdup() and return the error
if it fails in order to avoid NULL pointer dereference.
Moreover, use kfree() in the later error handling in order to avoid
memory leak.

Fixes: c2f78f0cb294 ("media: vidtv: psi: add a Network Information Table (NIT)")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: vidtv: psi: Add check for kstrdup

Add check for the return value of kstrdup() and return the error
if it fails in order to avoid NULL pointer dereference.

Fixes: 7a7899f6f58e ("media: vidtv: psi: Implement an Event Information Table (EIT)")
Fixes: c2f78f0cb294 ("media: vidtv: psi: add a Network Information Table (NIT)")
Fixes: f90cf6079bf6 ("media: vidtv: add a bridge driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: nuvoton: npcm-video: Fix IS_ERR() vs NULL bug

The of_parse_phandle() function returns NULL on error.  It never returns
error pointers.  Update the check accordingly.

Fixes: 70721089985c ("media: nuvoton: Add driver for NPCM video capture and encoding engine")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: s5p-mfc: Fix potential deadlock on condlock

As &dev->condlock is acquired under irq context along the following
call chain from s5p_mfc_irq(), other acquisition of the same lock
inside process context or softirq context should disable irq avoid double
lock. enc_post_frame_start() seems to be one such function that execute
under process context or softirq context.

<deadlock #1>

enc_post_frame_start()
--> clear_work_bit()
--> spin_loc(&dev->condlock)
<interrupt>
   --> s5p_mfc_irq()
   --> s5p_mfc_handle_frame()
   --> clear_work_bit()
   --> spin_lock(&dev->condlock)

This flaw was found by an experimental static analysis tool I am
developing for irq-related deadlock.

To prevent the potential deadlock, the patch change clear_work_bit()
inside enc_post_frame_start() to clear_work_bit_irqsave().

Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: mediatek: vcodec: add encoder power management helper functions

Remove PM functions at start/stop streaming, add PM helper functions
to get PM before encoding frame start and put PM after encoding frame
done. Meanwhile, remove unnecessary clock operations.

Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: tvp541x: Sort header files

Sort header files alphabetically.

Suggested-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: tvp541x: Drop CONFIG_OF ifdeffery

Drop of_match_ptr() from tvp514x_driver and get rid of ugly CONFIG_OF
if check. This slightly increases the size of tvp514x_driver on non-OF
system and shouldn't be an issue.

Add mod_devicetable.h include.

It also allows, in case if needed, to enumerate this device via ACPI with
PRP0001 magic.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: tvp541x: Extend match support for OF tables

The driver has an OF match table, still, it uses an ID lookup table for
retrieving match data. Currently, the driver is working on the
assumption that an I2C device registered via OF will always match a
legacy I2C device ID. The correct approach is to have an OF device ID
table using i2c_get_match_data() if the devices are registered via OF/ID.

Unify the OF/ID table by using tvp514x_reg as match data for both
these tables and replace the ID lookup table for the match data by
i2c_get_match_data() and simplifly probe().

While at it, remove the trailing comma in the terminator entry for the OF
table making code robust against (theoretical) misrebases or other similar
things where the new entry goes _after_ the termination without the
compiler noticing.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: v4l2-event: Annotate struct v4l2_subscribed_event with __counted_by

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for
struct v4l2_subscribed_event.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.

[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci

Cc: lijian <lijian@yulong.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: allegro: Annotate struct mcu_msg_push_buffers_internal with __counted_by

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for
struct mcu_msg_push_buffers_internal.

[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci

Cc: Michael Tretter <m.tretter@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: s3c-camif: Avoid inappropriate kfree()

s3c_camif_register_video_node() works with video_device structure stored
as a field of camif_vp, so it should not be kfreed.
But there is video_device_release() on error path that do it.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: babde1c243b2 ("[media] V4L: Add driver for S3C24XX/S3C64XX SoC series camera interface")
Signed-off-by: Katya Orlova <e.orlova@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: cobalt: Use FIELD_GET() to extract Link Width

Use FIELD_GET() to extract PCIe Negotiated and Maximum Link Width fields
instead of custom masking and shifting.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: i2c: adv7180: Drop CONFIG_OF ifdeffery

Drop of_match_ptr() from adv7180_driver and get rid of ugly CONFIG_OF
if check. This slightly increases the size of adv7180_driver on non-OF
system and shouldn't be an issue.

Add mod_devicetable.h include.

It also allows, in case if needed, to enumerate this device via ACPI with
PRP0001 magic.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: i2c: adv7180: Extend match support for OF tables

The driver has an OF match table, still, it uses an ID lookup table for
retrieving match data. Currently, the driver is working on the
assumption that an I2C device registered via OF will always match a
legacy I2C device ID. The correct approach is to have an OF device ID
table using i2c_get_match_data() if the devices are registered via OF/ID.

Unify the OF/ID table by using struct adv7180_chip_info as match data for
both these tables and replace the ID lookup table for the match data by
i2c_get_match_data().

While at it, remove the trailing comma in the terminator entry for the OF
table making code robust against (theoretical) misrebases or other similar
things where the new entry goes _after_ the termination without the
compiler noticing.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: mtk-jpegenc: Fix bug in JPEG encode quality selection

The driver uses the upper-bound approach to decide the target JPEG
encode quality, but there's a logic bug that if the desired quality is
higher than what the driver can support, the driver falls back to using
the worst quality.

Fix the bug by assuming using the best quality in the beginning, and
with trivial refactor to avoid long lines.

Fixes: 45f13a57d813 ("media: platform: Add jpeg enc feature")
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: platform: mtk-mdp3: add missing of_node_put

for_each_child_of_node performs an of_node_get on each
iteration, so a break out of the loop requires an
of_node_put.

This was done using the Coccinelle semantic patch
iterators/for_each_child.cocci

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: Documentation: dv-timings.rst: explain basic approach

Explain how the DV Timings API and the V4L2_EVENT_SOURCE_CHANGE
event work together to handle video source changes.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: amphion: handle firmware debug message

decoder firmware may notify host some debug message,
it can help analyze the state of the firmware in case of error

Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: qcom: camss: Comment CSID dt_id field

Digging into the documentation we find that the DT_ID bitfield is used to
map the six bit DT to a two bit ID code. This value is concatenated to the
VC bitfield to create a CID value. DT_ID is the two least significant bits
of CID and VC the most significant bits.

Originally we set dt_id = vc * 4 in and then subsequently set dt_id = vc.

commit 3c4ed72a16bc ("media: camss: sm8250: Virtual channels for CSID")
silently fixed the multiplication by four which would give a better
value for the generated CID without mentioning what was being done or why.

Next up I haplessly changed the value back to "dt_id = vc * 4" since there
didn't appear to be any logic behind it.

Hans asked what the change was for and I honestly couldn't remember the
provenance of it, so I dug in.

Link: https://lore.kernel.org/linux-arm-msm/edd4bf9b-0e1b-883c-1a4d-50f4102c3924@xs4all.nl/
Add a comment so the next hapless programmer doesn't make this same
mistake.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

media: qcom: camss: Propagate vfe_reset error up the callstack

A previous patch I had removed the returns from vfe_disable() since we
didn't trap any meaningful errors. Konrad pointed out vfe_reset() could
return an error, which is true.

Trap the vfe_reset() error code and throw it up the callstack.

Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>