Omar Sandoval reported that a 4G fallocate on the realtime device causes
filesystem shutdowns due to a log reservation overflow that happens when
we log the rtbitmap updates. Factor rtbitmap/rtsummary updates into the
the tr_write and tr_itruncate log reservation calculation.
"The following reproducer results in a transaction log overrun warning
for me:
generic/522 (fsx) occasionally fails with a file corruption due to
an insert range operation. The primary characteristic of the
corruption is a misplaced insert range operation that differs from
the requested target offset. The reason for this behavior is a race
between the extent shift sequence of an insert range and a COW
writeback completion that causes a front merge with the first extent
in the shift.
The shift preparation function flushes and unmaps from the target
offset of the operation to the end of the file to ensure no
modifications can be made and page cache is invalidated before file
data is shifted. An insert range operation then splits the extent at
the target offset, if necessary, and begins to shift the start
offset of each extent starting from the end of the file to the start
offset. The shift sequence operates at extent level and so depends
on the preparation sequence to guarantee no changes can be made to
the target range during the shift. If the block immediately prior to
the target offset was dirty and shared, however, it can undergo
writeback and move from the COW fork to the data fork at any point
during the shift. If the block is contiguous with the block at the
start offset of the insert range, it can front merge and alter the
start offset of the extent. Once the shift sequence reaches the
target offset, it shifts based on the latest start offset and
silently changes the target offset of the operation and corrupts the
file.
To address this problem, update the shift preparation code to
stabilize the start boundary along with the full range of the
insert. Also update the existing corruption check to fail if any
extent is shifted with a start offset behind the target offset of
the insert range. This prevents insert from racing with COW
writeback completion and fails loudly in the event of an unexpected
extent shift.
Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Commit 5b094d6dac04 ("xfs: fix multi-AG deadlock in xfs_bunmapi") added
a check in __xfs_bunmapi() to stop early if we would touch multiple AGs
in the wrong order. However, this check isn't applicable for realtime
files. In most cases, it just makes us do unnecessary commits. However,
without the fix from the previous commit ("xfs: fix realtime file data
space leak"), if the last and second-to-last extents also happen to have
different "AG numbers", then the break actually causes __xfs_bunmapi()
to return without making any progress, which sends
xfs_itruncate_extents_flags() into an infinite loop.
Fixes: 5b094d6dac04 ("xfs: fix multi-AG deadlock in xfs_bunmapi") Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Realtime files in XFS allocate extents in rextsize units. However, the
written/unwritten state of those extents is still tracked in blocksize
units. Therefore, a realtime file can be split up into written and
unwritten extents that are not necessarily aligned to the realtime
extent size. __xfs_bunmapi() has some logic to handle these various
corner cases. Consider how it handles the following case:
1. The last extent is unwritten.
2. The last extent is smaller than the realtime extent size.
3. startblock of the last extent is not aligned to the realtime extent
size, but startblock + blockcount is.
In this case, __xfs_bunmapi() calls xfs_bmap_add_extent_unwritten_real()
to set the second-to-last extent to unwritten. This should merge the
last and second-to-last extents, so __xfs_bunmapi() moves on to the
second-to-last extent.
However, if the size of the last and second-to-last extents combined is
greater than MAXEXTLEN, xfs_bmap_add_extent_unwritten_real() does not
merge the two extents. When that happens, __xfs_bunmapi() skips past the
last extent without unmapping it, thus leaking the space.
Fix it by only unwriting the minimum amount needed to align the last
extent to the realtime extent size, which is guaranteed to merge with
the last extent.
Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Use the xfs_da_get_buf_daddr function directly for the two callers
that pass a mapped disk address, and then remove the mappedbno argument.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Move the code for reading an already mapped block into
xfs_da3_node_read_mapped, which is the only caller ever passing a block
number in the mappedbno argument and replace the mappedbno argument with
the simple xfs_dabuf_get flags.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Split xfs_da3_node_read into one variant that always looks up the daddr
and doesn't accept holes, and one that already has a daddr at hand.
This is in preparation of splitting up xfs_da_read_buf in a similar way.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
This argument is always hard coded to -1, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
This argument is always hard coded to -1, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
This argument is always hard coded to -1, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Replace the mappedbno argument with the simple flags for xfs_da_reada_buf
and xfs_dir3_data_readahead.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Use a flags argument with the XFS_DABUF_MAP_HOLE_OK flag to signal that
a hole is okay and not corruption, and return 0 with *nmap set to 0 to
signal that case in the return value instead of a nameless -1 return
code.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Merge xfs_buf_map_from_irec and xfs_da_map_covers_blocks into a single
loop in the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Shortcut the creation of xfs_bmbt_irec and xfs_buf_map for the case
where the callers passed an already mapped xfs_daddr_t. This is in
preparation for splitting these cases out entirely later. Also reject
the mappedbno case for xfs_da_reada_buf as no callers currently uses
it and it will be removed soon.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
We can remove it now, without needing to rework the KM_ flags.
Use kmem_cache_free() directly.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
The leaf format xattr addition helper xfs_attr3_leaf_add_work()
adjusts the block freemap in a couple places. The first update drops
the size of the freemap that the caller had already selected to
place the xattr name/value data. Before the function returns, it
also checks whether the entries array has encroached on a freemap
range by virtue of the new entry addition. This is necessary because
the entries array grows from the start of the block (but end of the
block header) towards the end of the block while the name/value data
grows from the end of the block in the opposite direction. If the
associated freemap is already empty, however, size is zero and the
subtraction underflows the field and causes corruption.
This is reproduced rarely by generic/070. The observed behavior is
that a smaller sized freemap is aligned to the end of the entries
list, several subsequent xattr additions land in larger freemaps and
the entries list expands into the smaller freemap until it is fully
consumed and then underflows. Note that it is not otherwise a
corruption for the entries array to consume an empty freemap because
the nameval list (i.e. the firstused pointer in the xattr header)
starts beyond the end of the corrupted freemap.
Update the freemap size modification to account for the fact that
the freemap entry can be empty and thus stale.
Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Remove some unused typedef'd simple types, and some unused
structure members.
Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Remove some typdefs for type_t's that are no longer referred to
by their typedef'd types.
Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Pavel Reichl <preichl@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: fix a comment] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Pavel Reichl <preichl@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: fix some of the comments] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
The ioctl definitions for XFS_IOC_SWAPEXT, XFS_IOC_FSBULKSTAT and
XFS_IOC_FSBULKSTAT_SINGLE are part of libxfs and based on time_t.
The definition for time_t differs between current kernels and coming
32-bit libc variants that define it as 64-bit. For most ioctls, that
means the kernel has to be able to handle two different command codes
based on the different structure sizes.
The same solution could be applied for XFS_IOC_SWAPEXT, but it would
not work for XFS_IOC_FSBULKSTAT and XFS_IOC_FSBULKSTAT_SINGLE because
the structure with the time_t is passed through an indirect pointer,
and the command number itself is based on struct xfs_fsop_bulkreq,
which does not differ based on time_t.
This means any solution that can be applied requires a change of the
ABI definition in the xfs_fs.h header file, as well as doing the same
change in any user application that contains a copy of this header.
The usual solution would be to define a replacement structure and
use conditional compilation for the ioctl command codes to use
one or the other, such as
After this, the kernel would be able to implement both
XFS_IOC_FSBULKSTAT_OLD and XFS_IOC_FSBULKSTAT_NEW handlers on
32-bit architectures with the correct ABI for either definition
of time_t.
However, as long as two observations are true, a much simpler solution
can be used:
1. xfsprogs is the only user space project that has a copy of this header
2. xfsprogs already has a replacement for all three affected ioctl commands,
based on the xfs_bulkstat structure to pass 64-bit timestamps
regardless of the architecture
Based on those assumptions, changing xfs_bstime to use __kernel_long_t
instead of time_t in both the kernel and in xfsprogs preserves the current
ABI for any libc definition of time_t and solves the problem of passing
64-bit timestamps to 32-bit user space.
If either of the two assumptions is invalid, more discussion is needed
for coming up with a way to fix as much of the affected user space
code as possible.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
When target_ip exists in xfs_rename(), the xfs_dir_replace() call may
need to hold the AGF lock to allocate more blocks, and then invoking
the xfs_droplink() call to hold AGI lock to drop target_ip onto the
unlinked list, so we get the lock order AGF->AGI. This would break the
ordering constraint on AGI and AGF locking - inode allocation locks
the AGI, then can allocate a new extent for new inodes, locking the
AGF after the AGI.
In this patch we check whether the replace operation need more
blocks firstly. If so, acquire the agi lock firstly to preserve
locking order(AGI/AGF). Actually, the locking order problem only
occurs when we are locking the AGI/AGF of the same AG. For multiple
AGs the AGI lock will be released after the transaction committed.
Signed-off-by: kaixuxia <kaixuxia@tencent.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: reword the comment] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
We have the exact same memset in xfs_inode_alloc, which is always called
just before xfs_iread.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
There is no point in splitting the fields like this in an purely
in-memory structure.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
struct xfs_icdinode is purely an in-memory data structure, so don't use
a log on-disk structure for it. This simplifies the code a bit, and
also reduces our include hell slightly.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: fix a minor indenting problem in xfs_trans_ichgtime] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Instead of causing a relatively expensive indirect call for each
hashing and comparism of a file name in a directory just use an
inline function and a simple branch on the ASCII CI bit.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: fix unused variable warning] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the
creation of local variables and redirections of the code flow. This is
pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that
remove both of those ugly points. The change was performed with the
following coccinelle script:
Coverity points out that xfs_btree_islastblock doesn't check the return
value of xfs_btree_check_block. Since the question "Does the cursor
point to the last block in this level?" only makes sense if the caller
previously performed a lookup or seek operation, the block should
already have been checked.
Therefore, check the return value in an ASSERT and turn the whole thing
into a static inline predicate.
Coverity-id: 114069 Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Move the code for extracting the incore header to the only caller that
didn't already do that.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
There is no real need for xfs_dir2_data_freescan wrapper, so rename
xfs_dir2_data_freescan_int to xfs_dir2_data_freescan and let the
callers dereference the mount pointer from the inode.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Replace the ->data_get_ftype and ->data_put_ftype dir ops methods with
directly called xfs_dir2_data_get_ftype and xfs_dir2_data_put_ftype
helpers that takes care of the differences between the directory format
with and without the file type field.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Replace the ->data_bestfree_p dir ops method with a directly called
xfs_dir2_data_bestfree_p helper that takes care of the differences
between the v4 and v5 on-disk format.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Remove the XFS_DIR2_DATA_ENTSIZE and XFS_DIR3_DATA_ENTSIZE and open
code them in their only caller, which now becomes so simple that
we can turn it into an inline function.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Move the data block fixed offsets towards our structure for dir/attr
geometry parameters.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Replace the ->data_entry_tag_p dir ops method with a directly called
xfs_dir2_data_entry_tag_p helper that takes care of the differences
between the directory format with and without the file type field.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Replace the ->data_entsize dir ops method with a directly called
xfs_dir2_data_entsize helper that takes care of the differences between
the directory format with and without the file type field.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
All the callers really want an offset into the buffer, so adopt
the helper to return that instead.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Now that all users use the data_entry_offset field this method is
unused and can be removed.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Eric Sandeen [Wed, 22 Jan 2020 16:29:43 +0000 (11:29 -0500)]
xfs_repair: stop using ->data_entry_p()
The ->data_entry_p() op went away in v5.5 kernelspace, so rework
xfs_repair to use ->data_entry_offset instead, in preparation
for the v5.5 libxfs backport.
This could later be cleaned up to use offsets as was done
in kernel commit 8073af5153c for example.
Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Use an offset as the main means for iteration, and only do pointer
arithmetics to find the data/unused entries.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Use an offset as the main means for iteration, and only do pointer
arithmetics to find the data/unused entries.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Use an offset as the main means for iteration, and only do pointer
arithmetics to find the data/unused entries.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Replace the two users of the ->data_unused_p dir ops method with a
direct calculation using ->data_entry_offset, and clean them up a bit.
xfs_dir2_sf_to_block already had an offset variable containing the
value of ->data_entry_offset, which we are now reusing to make it
clear that the initial freespace entry is at the same place that
we later fill in the 1 entry, and in xfs_dir3_data_init the function
is cleaned up a bit to keep the initialization of fields of a given
structure close to each other, and to avoid a local variable.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
The only user of the ->data_dot_entry_p and ->data_dotdot_entry_p
methods is the xfs_dir2_sf_to_block function that builds block format
directorys from a short form directory. It already uses pointer
arithmetics with a offset variable to do so for the real entries in
the directory, so switch the generation of the . and .. entries to
the same scheme, and clean up some of the later pointer arithmetics
to use bp->b_addr directly as well and avoid some casts.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
The data_dotdot_offset value is always equal to data_entry_offset plus
the fixed size of the "." entry. Right now calculating that fixed size
requires an indirect call, but by the end of this series it will be
an inline function that can be constant folded.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
The data_dot_offset value is always equal to data_entry_offset given
that "." is always the first entry in the directory.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Replace the ->sf_get_ftype and ->sf_put_ftype dir ops methods with
directly called xfs_dir2_sf_get_ftype and xfs_dir2_sf_put_ftype helpers
that takes care of the differences between the directory format with and
without the file type field.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Replace the ->sf_get_ino and ->sf_put_ino dir ops methods with directly
called xfs_dir2_sf_get_ino and xfs_dir2_sf_put_ino helpers that take care
of the difference between the directory format with and without the file
type field. Also move xfs_dir2_sf_get_parent_ino and
xfs_dir2_sf_put_parent_ino to xfs_dir2_sf.c with the rest of the
low-level short form entry handling and use XFS_MAXINUMBER istead of
opencoded constants.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Just check for file-type enabled directories directly.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
The parent inode handling is the same for all directory format variants,
just use direct calls instead of going through a pointless indirect
call.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Now that the max bests value is in struct xfs_da_geometry both instances
of ->db_to_fdb and ->db_to_fdindex are identical. Replace them with
local xfs_dir2_db_to_fdb and xfs_dir2_db_to_fdindex functions in
xfs_dir2_node.c.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Move the max free bests count towards our structure for dir/attr
geometry parameters.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Move the free header size towards our structure for dir/attr geometry
parameters.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
All but two callers of the ->free_bests_p dir operation already have a
struct xfs_dir3_icfree_hdr from a previous call to
xfs_dir2_free_hdr_from_disk at hand. Add a pointer to the bests to
struct xfs_dir3_icfree_hdr to clean up this pattern. To optimize this
pattern, pass the struct xfs_dir3_icfree_hdr to xfs_dir2_free_log_bests
instead of recalculating the pointer there.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Return the xfs_dir3_icfree_hdr used by the helpers called from
xfs_dir2_node_addname_int to the main function to prepare for the
next round of changes where we'll use the ichdr in xfs_dir3_icfree_hdr
to avoid extra operations to find the bests pointers.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Replace the ->free_hdr_to_disk dir ops method with a directly called
xfs_dir2_free_hdr_to_disk helper that takes care of the differences
between the v4 and v5 on-disk format.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Replace the ->free_hdr_from_disk dir ops method with a directly called
xfs_dir_free_hdr_from_disk helper that takes care of the differences
between the v4 and v5 on-disk format.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Move the max leaf entries count towards our structure for dir/attr
geometry parameters.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Move the leaf header size towards our structure for dir/attr geometry
parameters.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
All callers of the ->node_tree_p dir operation already have a struct
xfs_dir3_icleaf_hdr from a previous call to xfs_da_leaf_hdr_from_disk at
hand, or just need slight changes to the calling conventions to do so.
Add a pointer to the entries to struct xfs_dir3_icleaf_hdr to clean up
this pattern. To make this possible the xfs_dir3_leaf_log_ents function
grow a new argument to pass the xfs_dir3_icleaf_hdr that call callers
already have, and xfs_dir2_leaf_lookup_int returns the
xfs_dir3_icleaf_hdr to the callers so that they can later use it.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Replace the ->leaf_hdr_to_disk dir ops method with a directly called
xfs_dir_leaf_hdr_to_disk helper that takes care of the differences
between the v4 and v5 on-disk format.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Replace the ->leaf_hdr_from_disk dir ops method with a directly called
xfs_dir2_leaf_hdr_from_disk helper that takes care of the differences
between the v4 and v5 on-disk format.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Move the node header size field to struct xfs_da_geometry, and remove
the now unused non-directory dir ops infrastructure.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
All but two callers of the ->node_tree_p dir operation already have a
xfs_da3_icnode_hdr from a previous call to xfs_da3_node_hdr_from_disk at
hand. Add a pointer to the btree entries to struct xfs_da3_icnode_hdr
to clean up this pattern. The two remaining callers now expand the
whole header as well, but that isn't very expensive and not in a super
hot path anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Replace the ->node_hdr_to_disk dir ops method with a directly called
xfs_da_node_hdr_to_disk helper that takes care of the v4 vs v5
difference.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Replace the ->node_hdr_from_disk dir ops method with a directly called
xfs_da_node_hdr_from_disk helper that takes care of the v4 vs v5
difference.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
None of these can ever be negative, so use unsigned types.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Move the abstract in-memory version of various btree block headers
out of xfs_da_format.h as they aren't on-disk formats.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Replace the open-coded checks for whether or not an inode fork maps
blocks with a macro that will implant the code for us. This helps us
declutter the bmap code a bit.
Note that I had to use a macro instead of a static inline function
because of C header dependency problems between xfs_inode.h and
xfs_inode_fork.h.
Conversion was performed with the following Coccinelle script:
Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Bill O'Donnell <billodo@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Coverity complains that we don't check the return value of
xfs_iext_peek_prev_extent like we do nearly all of the time. If there
is no previous extent then just null out bma->prev like we do elsewhere
in the bmap code.
Coverity-id: 1424057 Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Some of the xfs source files are missing header includes, so add them
back. Sparse complains about non-static functions that don't have a
forward declaration anywhere.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Refactor the code that complains when a dir/attr mapping doesn't exist
but the caller requires a mapping. This small restructuring helps us to
reduce the indenting level.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Make sure we log something to dmesg whenever we return -EFSCORRUPTED up
the call stack.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Each of the four functions that operate on shortform directories checks
that the directory's di_size is at least as large as the shortform
directory header. This is now checked by the inode fork verifiers
(di_size is used to allocate if_bytes, and if_bytes is checked against
the header structure size) so we can turn these checks into ASSERTions.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Always set XFS_ALLOC_USERDATA for data fork allocations, and check it
in xfs_alloc_is_userdata instead of the current obsfucated check.
Also remove the xfs_alloc_is_userdata and xfs_alloc_allow_busy_reuse
helpers to make the code a little easier to understand.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Move the extent zeroing case there for the XFS_BMAPI_ZERO flag outside
the low-level allocator and into xfs_bmapi_allocate, where is still
is in transaction context, but outside the very lowlevel code where
it doesn't belong.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Avoid duplicate userdata and data fork checks by restructuring the code
so we only have a helper for userdata allocations that combines these
checks in a straight foward way. That also helps to obsoletes the
comments explaining what the code does as it is now clearly obvious.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
xfs_iread_extents open-codes everything in xfs_btree_visit_blocks, so
refactor the btree helper to be able to iterate only the records on
level 0, then port iread_extents to use it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
There are a few places where we return -EIO instead of -EFSCORRUPTED
when we find corrupt metadata. Fix those places.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Actually call namecheck on attribute names before we hand them over to
userspace.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Add missing structure checks in the attribute leaf verifier.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
xfs_bmapi_write() takes a total block requirement parameter that is
passed down to the block allocation code and is used to specify the
total block requirement of the associated transaction. This is used
to try and select an AG that can not only satisfy the requested
extent allocation, but can also accommodate subsequent allocations
that might be required to complete the transaction. For example,
additional bmbt block allocations may be required on insertion of
the resulting extent to an inode data fork.
While it's important for callers to calculate and reserve such extra
blocks in the transaction, it is not necessary to pass the total
value to xfs_bmapi_write() in all cases. The latter automatically
sets minleft to ensure that sufficient free blocks remain after the
allocation attempt to expand the format of the associated inode
(i.e., such as extent to btree conversion, btree splits, etc).
Therefore, any callers that pass a total block requirement of the
bmap mapping length plus worst case bmbt expansion essentially
specify the additional reservation requirement twice. These callers
can pass a total of zero to rely on the bmapi minleft policy.
Beyond being superfluous, the primary motivation for this change is
that the total reservation logic in the bmbt code is dubious in
scenarios where minlen < maxlen and a maxlen extent cannot be
allocated (which is more common for data extent allocations where
contiguity is not required). The total value is based on maxlen in
the xfs_bmapi_write() caller. If the bmbt code falls back to an
allocation between minlen and maxlen, that allocation will not
succeed until total is reset to minlen, which essentially throws
away any additional reservation included in total by the caller. In
addition, the total value is not reset until after alignment is
dropped, which means that such callers drop alignment far too
aggressively than necessary.
Update all callers of xfs_bmapi_write() that pass a total block
value of the mapping length plus bmbt reservation to instead pass
zero and rely on xfs_bmapi_minleft() to enforce the bmbt reservation
requirement. This trades off slightly less conservative AG selection
for the ability to preserve alignment in more scenarios.
xfs_bmapi_write() callers that incorporate unrelated or additional
reservations in total beyond what is already included in minleft
must continue to use the former.
Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Cap longest extent to the largest we can allocate based on limits
calculated at mount time. Dynamic state (such as finobt blocks)
can result in the longest free extent exceeding the size we can
allocate, and that results in failure to align full AG allocations
when the AG is empty.
Result:
xfs_io-4413 [003] 426.412459: xfs_alloc_vextent_loopfailed: dev 8:96 agno 0 agbno 32 minlen 243968 maxlen 244000 mod 0 prod 1 minleft 1 total 262148 alignment 32 minalignslop 0 len 0 type NEAR_BNO otype START_BNO wasdel 0 wasfromfl 0 resv 0 datatype 0x5 firstblock 0xffffffffffffffff
minlen and maxlen are now separated by the alignment size, and
allocation fails because args.total > free space in the AG.
[bfoster: Added xfs_bmap_btalloc() changes.]
Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
This test uncovered a problem where the hole punching operation
appeared to finish with no error, but apparently only created 268M
extents instead of the 10 billion it was supposed to.
Further, trying to punch out extents that should have been present
resulted in success, but no change in the extent count. It looked
like a silent failure.
While running the test and observing the behaviour in real time,
I observed the extent coutn growing at ~2M extents/minute, and saw
this after about an hour:
And it's back at the expected number. i.e. the extent count is
correct on disk, but it's screwed up in memory. I loaded up the
extent list, and immediately:
And that's the behaviour I just saw in a nutshell. The on disk count
is correct, but once the tree is loaded into memory, it goes whacky.
Clearly there's something wrong with xfs_iext_count():
Simple enough, but 134M extents is 2**27, and that's right about
where things went wrong. A struct xfs_iext_rec is 16 bytes in size,
which means 2**27 * 2**4 = 2**31 and we're right on target for an
integer overflow. And, sure enough:
struct xfs_ifork {
int if_bytes; /* bytes in if_u1 */
....
Once we get 2**27 extents in a file, we overflow if_bytes and the
in-core extent count goes wrong. And when we reach 2**28 extents,
if_bytes wraps back to zero and things really start to go wrong
there. This is where the silent failure comes from - only the first
2**28 extents can be looked up directly due to the overflow, all the
extents above this index wrap back to somewhere in the first 2**28
extents. Hence with a regular pattern, trying to punch a hole in the
range that didn't have holes mapped to a hole in the first 2**28
extents and so "succeeded" without changing anything. Hence "silent
failure"...
Fix this by converting if_bytes to a int64_t and converting all the
index variables and size calculations to use int64_t types to avoid
overflows in future. Signed integers are still used to enable easy
detection of extent count underflows. This enables scalability of
extent counts to the limits of the on-disk format - MAXEXTNUM
(2**31) extents.
Current testing is at over 500M extents and still going:
Reported-by: Zorro Lang <zlang@redhat.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
The near mode fallback algorithm consists of a left/right scan of
the bnobt. This algorithm has very poor breakdown characteristics
under worst case free space fragmentation conditions. If a suitable
extent is far enough from the locality hint, each allocation may
scan most or all of the bnobt before it completes. This causes
pathological behavior and extremely high allocation latencies.
While locality is important to near mode allocations, it is not so
important as to incur pathological allocation latency to provide the
asolute best available locality for every allocation. If the
allocation is large enough or far enough away, there is a point of
diminishing returns. As such, we can bound the overall operation by
including an iterative cntbt lookup in the broader search. The cntbt
lookup is optimized to immediately find the extent with best
locality for the given size on each iteration. Since the cntbt is
indexed by extent size, the lookup repeats with a variably
aggressive increasing search key size until it runs off the edge of
the tree.
This approach provides a natural balance between the two algorithms
for various situations. For example, the bnobt scan is able to
satisfy smaller allocations such as for inode chunks or btree blocks
more quickly where the cntbt search may have to search through a
large set of extent sizes when the search key starts off small
relative to the largest extent in the tree. On the other hand, the
cntbt search more deterministically covers the set of suitable
extents for larger data extent allocation requests that the bnobt
scan may have to search the entire tree to locate.
Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
In preparation to enhance the near mode allocation bnobt scan algorithm, lift
it into a separate function. No functional changes.
Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
The bnobt "find best" helper implements a simple btree walker
function. This general pattern, or a subset thereof, is reused in
various parts of a near mode allocation operation. For example, the
bnobt left/right scans are each iterative btree walks along with the
cntbt lastblock scan.
Rework this function into a generic btree walker, add a couple
parameters to control termination behavior from various contexts and
reuse it where applicable.
Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Both algorithms duplicate the same btree allocation code. Eliminate
the duplication and reuse the fallback algorithm codepath.
Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
The near mode bnobt scan searches left and right in the bnobt
looking for the closest free extent to the allocation hint that
satisfies minlen. Once such an extent is found, the left/right
search terminates, we search one more time in the opposite direction
and finish the allocation with the best overall extent.
The left/right and find best searches are currently controlled via a
combination of cursor state and local variables. Clean up this code
and prepare for further improvements to the near mode fallback
algorithm by reusing the allocation cursor best extent tracking
mechanism. Update the tracking logic to deactivate bnobt cursors
when out of allocation range and replace open-coded extent checks to
calls to the common helper. In doing so, rename some misnamed local
variables in the top-level near mode allocation function.
Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
The cntbt lastblock scan checks the size, alignment, locality, etc.
of each free extent in the block and compares it with the current
best candidate. This logic will be reused by the upcoming optimized
cntbt algorithm, so refactor it into a separate helper. Note that
acur->diff is now initialized to -1 (unsigned) instead of 0 to
support the more granular comparison logic in the new helper.
Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
If the size lookup lands in the last block of the by-size btree, the
near mode algorithm scans the entire block for the extent with best
available locality. In preparation for similar best available
extent tracking across both btrees, extend the allocation cursor
with best extent data and lift the associated state from the cntbt
last block scan code. No functional changes.
Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Extend the allocation cursor to track extent busy state for an
allocation attempt. No functional changes.
Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Introduce a new allocation cursor data structure to encapsulate the
various states and structures used to perform an extent allocation.
This structure will eventually be used to track overall allocation
state across different search algorithms on both free space btrees.
To start, include the three btree cursors (one for the cntbt and two
for the bnobt left/right search) used by the near mode allocation
algorithm and refactor the cursor setup and teardown code into
helpers. This slightly changes cursor memory allocation patterns,
but otherwise makes no functional changes to the allocation
algorithm.
Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: fix sparse complaints] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
projects / users / hch / xfsprogs.git / log