Vincent Mailhol [Sun, 6 Mar 2022 07:55:16 +0000 (16:55 +0900)]
usb: isp1760: remove redundant max_packet() macro
The function usb_endpoint_maxp() (called by usb_maxpacket()) already
does the sanitazation of the USB endpoint max packet size. The call to
max_packet() does the same thing and is thus removed.
The macro max_packet() not being used anymore also gets removed.
Vincent Mailhol [Sun, 6 Mar 2022 07:55:15 +0000 (16:55 +0900)]
usb: oxu210hp-hcd: remove redundant call to max_packet() macro
The function usb_endpoint_maxp() (called by usb_maxpacket()) already
does the sanitazation of the USB endpoint max packet size. The call to
max_packet() does the same thing and is thus removed.
However, the macro max_packet() is kept because it is used elsewhere
in the file.
Alexander Stein [Wed, 9 Mar 2022 09:38:42 +0000 (10:38 +0100)]
usb: common: usb-conn-gpio: Make VBUS supply completely optional
It makes sense that if the USB connector is a child of an USB port
providing VBUS supply, there is no need to do it again.
But this does not handle the case where VBUS is controlled by PWR from
USB host controller, without any regulator at all.
Support this by making VBUS pure optional.
Dan Carpenter [Fri, 4 Mar 2022 07:35:04 +0000 (10:35 +0300)]
USB: storage: ums-realtek: fix error code in rts51x_read_mem()
The rts51x_read_mem() function should return negative error codes.
Currently if the kmalloc() fails it returns USB_STOR_TRANSPORT_ERROR (3)
which is treated as success by the callers.
Fixes: 065e60964e29 ("ums_realtek: do not use stack memory for DMA") Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220304073504.GA26464@kili Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Fri, 4 Mar 2022 15:19:54 +0000 (16:19 +0100)]
x86/tsc: Be consistent about use_tsc_delay()
Currently loops_per_jiffy is set in tsc_early_init(), but then don't
switch to delay_tsc, with the result that delay_loop is used with
loops_per_jiffy set for delay_tsc.
Then in (late) tsc_init() lpj_fine is set (which is mostly unused) and
after which use_tsc_delay() is finally called.
Move both loops_per_jiffy and use_tsc_delay() into
tsc_enable_sched_clock() which is called the moment tsc_khz is
determined, be it early or late. Keeping the lot consistent.
Jakob Koschel [Tue, 8 Mar 2022 17:18:18 +0000 (18:18 +0100)]
usb: gadget: udc: s3c2410: remove usage of list iterator past the loop body
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable [1].
Jakob Koschel [Tue, 8 Mar 2022 17:18:17 +0000 (18:18 +0100)]
usb: gadget: dummy_hcd: remove usage of list iterator past the loop body
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable [1].
Jakob Koschel [Tue, 8 Mar 2022 17:18:16 +0000 (18:18 +0100)]
usb: gadget: udc: core: remove usage of list iterator past the loop body
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable [1].
Jakob Koschel [Tue, 8 Mar 2022 17:18:15 +0000 (18:18 +0100)]
usb: gadget: composite: remove usage of list iterator past the loop body
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable [1].
Jakob Koschel [Tue, 8 Mar 2022 17:18:14 +0000 (18:18 +0100)]
usb: gadget: pxa27x_udc: replace usage of rc to check if a list element was found
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable [1].
Jakob Koschel [Tue, 8 Mar 2022 17:18:13 +0000 (18:18 +0100)]
usb: gadget: composite: remove check of list iterator against head past the loop body
When list_for_each_entry() completes the iteration over the whole list
without breaking the loop, the iterator value will be a bogus pointer
computed based on the head element.
While it is safe to use the pointer to determine if it was computed
based on the head element, either with list_entry_is_head() or
&pos->member == head, using the iterator variable after the loop should
be avoided.
In preparation to limiting the scope of a list iterator to the list
traversal loop, use a dedicated pointer to point to the found element [1].
Jakob Koschel [Tue, 8 Mar 2022 17:18:12 +0000 (18:18 +0100)]
usb: gadget: tegra-xudc: remove using list iterator after loop body as a ptr
If the list does not contain the expected element, the value of
list_for_each_entry() iterator will not point to a valid structure.
To avoid type confusion in such case, the list iterator
scope will be limited to list_for_each_entry() loop.
In preparation to limiting scope of a list iterator to the list traversal
loop, use a dedicated pointer to point to the found element [1].
Determining if an element was found is then simply checking if
the pointer is != NULL instead of using the potentially bogus pointer.
Jakob Koschel [Tue, 8 Mar 2022 17:18:11 +0000 (18:18 +0100)]
usb: gadget: udc: max3420_udc: remove using list iterator after loop body as a ptr
If the list does not contain the expected element, the value of
list_for_each_entry() iterator will not point to a valid structure.
To avoid type confusion in such case, the list iterator
scope will be limited to list_for_each_entry() loop.
In preparation to limiting scope of a list iterator to the list traversal
loop, use a dedicated pointer to point to the found element [1].
Determining if an element was found is then simply checking if
the pointer is != NULL instead of using the potentially bogus pointer.
Jakob Koschel [Tue, 8 Mar 2022 17:18:10 +0000 (18:18 +0100)]
usb: gadget: legacy: remove using list iterator after loop body as a ptr
If the list does not contain the expected element, the value of
list_for_each_entry() iterator will not point to a valid structure.
To avoid type confusion in such case, the list iterator
scope will be limited to list_for_each_entry() loop.
In preparation to limiting scope of a list iterator to the list traversal
loop, use a dedicated pointer to point to the found element [1].
Determining if an element was found is then simply checking if
the pointer is != NULL instead of using the potentially bogus pointer.
Jakob Koschel [Tue, 8 Mar 2022 17:18:09 +0000 (18:18 +0100)]
usb: gadget: configfs: remove using list iterator after loop body as a ptr
If the list does not contain the expected element, the value of
list_for_each_entry() iterator will not point to a valid structure.
To avoid type confusion in such case, the list iterator
scope will be limited to list_for_each_entry() loop.
In preparation to limiting scope of a list iterator to the list traversal
loop, use a dedicated pointer to point to the found element [1].
Determining if an element was found is then simply checking if
the pointer is != NULL instead of using the potentially bogus pointer.
Jakob Koschel [Tue, 8 Mar 2022 17:18:08 +0000 (18:18 +0100)]
usb: gadget: aspeed: remove usage of list iterator past the loop body
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Jakob Koschel [Tue, 8 Mar 2022 17:18:07 +0000 (18:18 +0100)]
usb: gadget: udc-xilinx: remove usage of list iterator past the loop body
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Jakob Koschel [Tue, 8 Mar 2022 17:18:06 +0000 (18:18 +0100)]
usb: gadget: s3c-hsudc: remove usage of list iterator past the loop body
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Jakob Koschel [Tue, 8 Mar 2022 17:18:05 +0000 (18:18 +0100)]
usb: gadget: omap_udc: remove usage of list iterator past the loop body
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Jakob Koschel [Tue, 8 Mar 2022 17:18:04 +0000 (18:18 +0100)]
usb: gadget: udc: net2280: remove usage of list iterator past the loop body
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Jakob Koschel [Tue, 8 Mar 2022 17:18:03 +0000 (18:18 +0100)]
usb: gadget: net2272: remove usage of list iterator past the loop body
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Jakob Koschel [Tue, 8 Mar 2022 17:18:02 +0000 (18:18 +0100)]
usb: gadget: udc: mv_udc_core: remove usage of list iterator past the loop body
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Jakob Koschel [Tue, 8 Mar 2022 17:18:01 +0000 (18:18 +0100)]
usb: gadget: mv_u3d: remove usage of list iterator past the loop body
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Jakob Koschel [Tue, 8 Mar 2022 17:18:00 +0000 (18:18 +0100)]
usb: gadget: lpc32xx_udc: remove usage of list iterator past the loop body
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Jakob Koschel [Tue, 8 Mar 2022 17:17:59 +0000 (18:17 +0100)]
usb: gadget: udc: gr_udc: remove usage of list iterator past the loop body
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Jakob Koschel [Tue, 8 Mar 2022 17:17:58 +0000 (18:17 +0100)]
usb: gadget: goku_udc: remove usage of list iterator past the loop body
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Jakob Koschel [Tue, 8 Mar 2022 17:17:57 +0000 (18:17 +0100)]
usb: gadget: udc: at91: remove usage of list iterator past the loop body
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Jakob Koschel [Tue, 8 Mar 2022 17:17:56 +0000 (18:17 +0100)]
usb: gadget: udc: pxa25x: remove usage of list iterator past the loop body
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Jakob Koschel [Tue, 8 Mar 2022 17:17:55 +0000 (18:17 +0100)]
usb: gadget: udc: atmel: remove usage of list iterator past the loop body
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Jakob Koschel [Tue, 8 Mar 2022 17:17:54 +0000 (18:17 +0100)]
usb: gadget: bdc: remove usage of list iterator past the loop body
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Jakob Koschel [Tue, 8 Mar 2022 17:17:53 +0000 (18:17 +0100)]
usb: gadget: fsl: remove usage of list iterator past the loop body
If the list representing the request queue does not contain the expected
request, the value of the list_for_each_entry() iterator will not point
to a valid structure. To avoid type confusion in such case, the list
iterator scope will be limited to the list_for_each_entry() loop.
In preparation to limiting scope of the list iterator to the list traversal
loop, use a dedicated pointer to point to the found request object [1].
Thinh Nguyen [Tue, 8 Mar 2022 02:59:56 +0000 (18:59 -0800)]
usb: dwc3: gadget: Give some time to schedule isoc
Currently the driver will schedule isoc transfers immediately on the
next interval, which is quite aggressive when the interval is 125us.
There's report that some platforms may need more time to process the
transfer, otherwise the controller may miss the first interval. Let's
keep it simple and give the controller at least 500us to schedule the
isoc transfer.
Bin Yang [Mon, 28 Feb 2022 13:56:56 +0000 (08:56 -0500)]
usb: dwc3: core: do not use 3.0 clock when operating in 2.0 mode
In the 3.0 device core, if the core is programmed to operate in
2.0 only, then setting the GUCTL1.DEV_FORCE_20_CLK_FOR_30_CLK makes
the internal 2.0(utmi/ulpi) clock to be routed as the 3.0 (pipe)
clock. Enabling this feature allows the pipe3 clock to be not-running
when forcibly operating in 2.0 device mode.
Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Signed-off-by: Bin Yang <yangbin@rock-chips.com> Signed-off-by: Peter Geis <pgwipeout@gmail.com> Link: https://lore.kernel.org/r/20220228135700.1089526-6-pgwipeout@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Stein [Fri, 18 Feb 2022 15:27:06 +0000 (16:27 +0100)]
usb: dwc3: imx8mp: Add support for setting SOC specific flags
The i.MX8MP glue layer has support for the following flags:
* over-current polarity
* PWR pad polarity
* controlling PPC flag in HCCPARAMS register
* permanent port attach for usb2 & usb3 port
Allow setting these flags by supporting specific flags in the glue node.
In order to get this to work an additional IORESOURCE_MEM and clock is
necessary. For backward compatibility this is purely optional.
Alexander Stein [Fri, 18 Feb 2022 15:27:05 +0000 (16:27 +0100)]
dt-bindings: usb: dwc3-imx8mp: Add imx8mp specific flags
This adds bindings for features in the USB glue block. They allow
setting polarity of PWR and OC as well as disabling port power control.
Also permanently attached can be annotated as well.
Additional IO address and clock are needed.
Alexander Stein [Fri, 18 Feb 2022 15:27:04 +0000 (16:27 +0100)]
usb: dwc3: imx8mp: rename iomem base pointer
Until now the iomem used is not USB glue as the name suggests, but
HSIO BLK_CTL. Rename the struct member accordingly. This is a preparing
patch for when USB glue is actually used.
Revert all the changes to add the Embedded USB Debugger(EUD) Node
in the device tree, the connector node and also changes to usb2 Node
associated with this.The changes need to be reverted as DT changes
for QCOM should go through the QCOM tree and not the USB tree.
Revert the change to set dr_mode for usb2 in case of
Embedded USB Debugger(EUD). This change needs to be
reverted as the DT changes for QCOM should go through
the QCOM tree and not the USB tree.
Wei Ming Chen [Fri, 11 Mar 2022 08:29:45 +0000 (16:29 +0800)]
usb: raw-gadget: return -EINVAL if no proper ep address available
If we try to use raw_ioctl_ep_enable() for ep5in on a hardware that
only support from ep1-ep4 for both in and out direction, it will return
-EBUSY originally.
I think it will be more intuitive if we return -EINVAL, because -EBUSY
sounds like ep5in is not available now, but might be available in the
future.
Greg Kroah-Hartman [Fri, 11 Mar 2022 15:31:12 +0000 (16:31 +0100)]
Merge tag 'thunderbolt-for-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v5.18 merge window
This includes following Thunderbolt/USB4 changes for the v5.18 merge
window:
* Improvements for Intel Alpine and Titan Ridge support
* Replace acpi_bus_get_device() with acpi_fetch_acpi_dev()
* Improvements around DROM handling on AMD hardware
* A couple of cleanups.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Rename EEPROM handling bits to match USB4 spec
thunderbolt: Clarify register definitions for `tb_cap_plug_events`
thunderbolt: Do not make DROM read success compulsory
thunderbolt: Do not resume routers if UID is not set
thunderbolt: Retry DROM reads for more failure scenarios
thunderbolt: Replace acpi_bus_get_device()
thunderbolt: Add internal xHCI connect flows for Thunderbolt 3 devices
thunderbolt: Add missing device ID to tb_switch_is_alpine_ridge()
thunderbolt: Disable LTTPR on Intel Titan Ridge
thunderbolt: Remove useless DMA-32 fallback configuration
Greg Kroah-Hartman [Fri, 11 Mar 2022 11:43:06 +0000 (12:43 +0100)]
Merge tag 'usb-serial-5.18-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB-serial updates for 5.18-rc1
Here are the USB-serial updates for 5.18-rc1, including:
- a new "simple driver" for some Nokia phones
- a fix for pl2303 GS type detection
- another pl2303 device id
Included is also a clean up.
All have been in linux-next with no reported issues.
* tag 'usb-serial-5.18-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: usb_wwan: remove redundant assignment to variable i
USB: serial: pl2303: fix GS type detection
USB: serial: pl2303: add IBM device IDs
USB: serial: simple: add Nokia phone driver
Colin Ian King [Mon, 7 Mar 2022 18:31:00 +0000 (18:31 +0000)]
USB: serial: usb_wwan: remove redundant assignment to variable i
Variable i is being assigned a value that is never read, it is being
re-assigned two statements later in a for-loop. The assignment is
redundant and can be removed.
Cleans up clang scan build warning:
drivers/usb/serial/usb_wwan.c:151:2: warning: Value stored to 'i'
is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
Johan Hovold [Mon, 7 Mar 2022 14:23:19 +0000 (15:23 +0100)]
USB: serial: pl2303: fix GS type detection
At least some PL2303GS have a bcdDevice of 0x605 instead of 0x100 as the
datasheet claims. Add it to the list of known release numbers for the
HXN (G) type.
Mario Limonciello [Thu, 3 Mar 2022 13:13:28 +0000 (07:13 -0600)]
thunderbolt: Rename EEPROM handling bits to match USB4 spec
The structure `tb_eeprom_ctl` is used to show the bits accessed when
reading/writing EEPROM.
As this structure is specified in the USB4 spec as `VSC_CS_4` update
the names and use of members to match the specification. This should not
change anything functionally.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Mario Limonciello [Thu, 3 Mar 2022 13:13:27 +0000 (07:13 -0600)]
thunderbolt: Clarify register definitions for `tb_cap_plug_events`
The USB4 1.0 specification outlines the `cap_plug_events` structure as
`VSC_CS_1`. This shows that 4 bits of `VSC_CS_1` are TBT3 compatible in
USB4, but TBT3 controllers also support disabling XHCI.
Update the names and comments to more closely match the specification.
This should not change anything functionally.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Mario Limonciello [Thu, 3 Mar 2022 13:13:25 +0000 (07:13 -0600)]
thunderbolt: Do not resume routers if UID is not set
Routers might not have a UID set if the DROM read failed during
initialization previously.
Normally upon resume the UID is re-read to confirm it's the same
device connected.
* If the DROM read failed during init but then succeeded during
resume it could either be a new device or faulty device
* If the DROM read failed during init and also failed during resume
it might be a different device plugged in all together.
Detect this situation and prevent re-using the same configuration in
these cirucmstances.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Eddie James [Tue, 1 Mar 2022 22:44:46 +0000 (16:44 -0600)]
USB: serial: pl2303: add IBM device IDs
IBM manufactures a PL2303 device for UPS communications. Add the vendor
and product IDs so that the PL2303 driver binds to the device.
Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20220301224446.21236-1-eajames@linux.ibm.com Cc: stable@vger.kernel.org
[ johan: amend the SoB chain ] Signed-off-by: Johan Hovold <johan@kernel.org>
Henry Lin [Thu, 3 Mar 2022 11:08:58 +0000 (13:08 +0200)]
xhci: fix runtime PM imbalance in USB2 resume
A race between system resume and device-initiated resume may result in
runtime PM imbalance on USB2 root hub. If a device-initiated resume
starts and system resume xhci_bus_resume() directs U0 before hub driver
sees the resuming device in RESUME state, device-initiated resume will
not be finished in xhci_handle_usb2_port_link_resume(). In this case,
usb_hcd_end_port_resume() call is missing.
This changes calls usb_hcd_end_port_resume() if resuming device reaches
U0 to keep runtime PM balance.
Fixes: a231ec41e6f6 ("xhci: refactor U0 link state handling in get_port_status") Cc: stable@vger.kernel.org Signed-off-by: Henry Lin <henryl@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220303110903.1662404-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anssi Hannula [Thu, 3 Mar 2022 11:08:57 +0000 (13:08 +0200)]
xhci: fix uninitialized string returned by xhci_decode_ctrl_ctx()
xhci_decode_ctrl_ctx() returns the untouched buffer as-is if both "drop"
and "add" parameters are zero.
Fix the function to return an empty string in that case.
It was not immediately clear from the possible call chains whether this
issue is currently actually triggerable or not.
Note that before commit 4843b4b5ec64 ("xhci: fix even more unsafe memory
usage in xhci tracing") the result effect in the failure case was different
as a static buffer was used here, but the code still worked incorrectly.
Fixes: 90d6d5731da7 ("xhci: Add tracing for input control context") Cc: stable@vger.kernel.org Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
commit 4843b4b5ec64 ("xhci: fix even more unsafe memory usage in xhci tracing") Link: https://lore.kernel.org/r/20220303110903.1662404-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anssi Hannula [Thu, 3 Mar 2022 11:08:56 +0000 (13:08 +0200)]
xhci: fix garbage USBSTS being logged in some cases
xhci_decode_usbsts() is expected to return a zero-terminated string by
its only caller, xhci_stop_endpoint_command_watchdog(), which directly
logs the return value:
However, if no recognized bits are set in usbsts, the function will
return without having called any sprintf() and therefore return an
untouched non-zero-terminated caller-provided buffer, causing garbage
to be output to log.
Fix that by always including the raw value in the output.
Note that before commit 4843b4b5ec64 ("xhci: fix even more unsafe memory
usage in xhci tracing") the result effect in the failure case was different
as a static buffer was used here, but the code still worked incorrectly.
Fixes: 9c1aa36efdae ("xhci: Show host status when watchdog triggers and host is assumed dead.") Cc: stable@vger.kernel.org Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220303110903.1662404-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathias Nyman [Thu, 3 Mar 2022 11:08:55 +0000 (13:08 +0200)]
xhci: make xhci_handshake timeout for xhci_reset() adjustable
xhci_reset() timeout was increased from 250ms to 10 seconds in order to
give Renesas 720201 xHC enough time to get ready in probe.
xhci_reset() is called with interrupts disabled in other places, and
waiting for 10 seconds there is not acceptable.
Add a timeout parameter to xhci_reset(), and adjust it back to 250ms
when called from xhci_stop() or xhci_shutdown() where interrupts are
disabled, and successful reset isn't that critical.
This solves issues when deactivating host mode on platforms like SM8450.
For now don't change the timeout if xHC is reset in xhci_resume().
No issues are reported for it, and we need the reset to succeed.
Locking around that reset needs to be revisited later.
Additionally change the signed integer timeout parameter in
xhci_handshake() to a u64 to match the timeout value we pass to
readl_poll_timeout_atomic()
Sven Peter [Sat, 26 Feb 2022 12:59:12 +0000 (13:59 +0100)]
usb: typec: tipd: Forward plug orientation to typec subsystem
In order to bring up the USB3 PHY on the Apple M1 we need to know the
orientation of the Type-C cable. Extract it from the status register and
forward it to the typec subsystem.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Sven Peter <sven@svenpeter.dev> Link: https://lore.kernel.org/r/20220226125912.59828-1-sven@svenpeter.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sun, 27 Feb 2022 21:07:40 +0000 (13:07 -0800)]
Merge tag 'irq-urgent-2022-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single fix for a regression caused by the recent PCI/MSI rework
which resulted in a recursive locking problem in the VMD driver.
The cure is to cache the relevant information upfront instead of
retrieving it at runtime"
* tag 'irq-urgent-2022-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI: vmd: Prevent recursive locking on interrupt allocation
Linus Torvalds [Sun, 27 Feb 2022 20:30:54 +0000 (12:30 -0800)]
Merge tag 'pinctrl-v5-17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix some drive strength and pull-up code in the K210 driver.
- Add the Alder Lake-M ACPI ID so it starts to work properly.
- Use a static name for the StarFive GPIO irq_chip, forestalling an
upcoming fixes series from Marc Zyngier.
- Fix an ages old bug in the Tegra 186 driver where we were indexing at
random into struct and being lucky getting the right member.
* tag 'pinctrl-v5-17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
gpio: tegra186: Fix chip_data type confusion
pinctrl: starfive: Use a static name for the GPIO irq_chip
pinctrl: tigerlake: Revert "Add Alder Lake-M ACPI ID"
pinctrl: k210: Fix bias-pull-up
pinctrl: fix loop in k210_pinconf_get_drive()
Linus Torvalds [Sat, 26 Feb 2022 20:10:17 +0000 (12:10 -0800)]
Merge tag 'trace-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- rtla (Real-Time Linux Analysis tool):
- fix typo in man page
- Update API -e to -E before it is released
- Error message fix and memory leak fix
- Partially uninline trace event soft disable to shrink text
- Fix function graph start up test
- Have triggers affect the trace instance they are in and not top level
- Have osnoise sleep in the units it says it uses
- Remove unused ftrace stub function
- Remove event probe redundant info from event in the buffer
- Fix group ownership setting in tracefs
- Ensure trace buffer is minimum size to prevent crashes
* tag 'trace-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
rtla/osnoise: Fix error message when failing to enable trace instance
rtla/osnoise: Free params at the exit
rtla/hist: Make -E the short version of --entries
tracing: Fix selftest config check for function graph start up test
tracefs: Set the group ownership in apply_options() not parse_options()
tracing/osnoise: Make osnoise_main to sleep for microseconds
ftrace: Remove unused ftrace_startup_enable() stub
tracing: Ensure trace buffer is at least 4096 bytes large
tracing: Uninline trace_trigger_soft_disabled() partly
eprobes: Remove redundant event type information
tracing: Have traceon and traceoff trigger honor the instance
tracing: Dump stacktrace trigger to the corresponding instance
rtla: Fix systme -> system typo on man page
Linus Torvalds [Sat, 26 Feb 2022 19:52:14 +0000 (11:52 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"12 patches.
Subsystems affected by this patch series: MAINTAINERS, mailmap, memfd,
and mm (hugetlb, kasan, hugetlbfs, pagemap, selftests, memcg, and
slab)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
selftests/memfd: clean up mapping in mfd_fail_write
mailmap: update Roman Gushchin's email
MAINTAINERS, SLAB: add Roman as reviewer, git tree
MAINTAINERS: add Shakeel as a memcg co-maintainer
MAINTAINERS: remove Vladimir from memcg maintainers
MAINTAINERS: add Roman as a memcg co-maintainer
selftest/vm: fix map_fixed_noreplace test failure
mm: fix use-after-free bug when mm->mmap is reused after being freed
hugetlbfs: fix a truncation issue in hugepages parameter
kasan: test: prevent cache merging in kmem_cache_double_destroy
mm/hugetlb: fix kernel crash with hugetlb mremap
MAINTAINERS: add sysctl-next git tree
Linus Torvalds [Sat, 26 Feb 2022 17:53:19 +0000 (09:53 -0800)]
Merge tag 'xfs-5.17-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"Nothing exciting, just more fixes for not returning sync_filesystem
error values (and eliding it when it's not necessary).
Summary:
- Only call sync_filesystem when we're remounting the filesystem
readonly readonly, and actually check its return value"
* tag 'xfs-5.17-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: only bother with sync_filesystem during readonly remount
Mike Kravetz [Sat, 26 Feb 2022 03:11:26 +0000 (19:11 -0800)]
selftests/memfd: clean up mapping in mfd_fail_write
Running the memfd script ./run_hugetlbfs_test.sh will often end in error
as follows:
memfd-hugetlb: CREATE
memfd-hugetlb: BASIC
memfd-hugetlb: SEAL-WRITE
memfd-hugetlb: SEAL-FUTURE-WRITE
memfd-hugetlb: SEAL-SHRINK
fallocate(ALLOC) failed: No space left on device
./run_hugetlbfs_test.sh: line 60: 166855 Aborted (core dumped) ./memfd_test hugetlbfs
opening: ./mnt/memfd
fuse: DONE
If no hugetlb pages have been preallocated, run_hugetlbfs_test.sh will
allocate 'just enough' pages to run the test. In the SEAL-FUTURE-WRITE
test the mfd_fail_write routine maps the file, but does not unmap. As a
result, two hugetlb pages remain reserved for the mapping. When the
fallocate call in the SEAL-SHRINK test attempts allocate all hugetlb
pages, it is short by the two reserved pages.
Fix by making sure to unmap in mfd_fail_write.
Link: https://lkml.kernel.org/r/20220219004340.56478-1-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vlastimil Babka [Sat, 26 Feb 2022 03:11:20 +0000 (19:11 -0800)]
MAINTAINERS, SLAB: add Roman as reviewer, git tree
The slab code has an overlap with kmem accounting, where Roman has done
a lot of work recently and it would be useful to make sure he's CC'd on
patches that potentially affect it. Thus add him as a reviewer for the
SLAB subsystem.
Also while at it, add the link to slab git tree.
Link: https://lkml.kernel.org/r/20220222103104.13241-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roman Gushchin [Sat, 26 Feb 2022 03:11:11 +0000 (19:11 -0800)]
MAINTAINERS: add Roman as a memcg co-maintainer
Add myself as a memcg co-maintainer. My primary focus over last few
years was the kernel memory accounting stack, but I do work on some
other parts of the memory controller as well.
Link: https://lkml.kernel.org/r/20220221233951.659048-1-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Suren Baghdasaryan [Sat, 26 Feb 2022 03:11:05 +0000 (19:11 -0800)]
mm: fix use-after-free bug when mm->mmap is reused after being freed
oom reaping (__oom_reap_task_mm) relies on a 2 way synchronization with
exit_mmap. First it relies on the mmap_lock to exclude from unlock
path[1], page tables tear down (free_pgtables) and vma destruction.
This alone is not sufficient because mm->mmap is never reset.
For historical reasons[2] the lock is taken there is also MMF_OOM_SKIP
set for oom victims before.
The oom reaper only ever looks at oom victims so the whole scheme works
properly but process_mrelease can opearate on any task (with fatal
signals pending) which doesn't really imply oom victims. That means
that the MMF_OOM_SKIP part of the synchronization doesn't work and it
can see a task after the whole address space has been demolished and
traverse an already released mm->mmap list. This leads to use after
free as properly caught up by KASAN report.
Fix the issue by reseting mm->mmap so that MMF_OOM_SKIP synchronization
is not needed anymore. The MMF_OOM_SKIP is not removed from exit_mmap
yet but it acts mostly as an optimization now.
[1] 27ae357fa82b ("mm, oom: fix concurrent munlock and oom reaper unmap, v3")
[2] 212925802454 ("mm: oom: let oom_reap_task and exit_mmap run concurrently")
[mhocko@suse.com: changelog rewrite]
Link: https://lore.kernel.org/all/00000000000072ef2c05d7f81950@google.com/ Link: https://lkml.kernel.org/r/20220215201922.1908156-1-surenb@google.com Fixes: 64591e8605d6 ("mm: protect free_pgtables with mmap_lock write lock in exit_mmap") Signed-off-by: Suren Baghdasaryan <surenb@google.com> Reported-by: syzbot+2ccf63a4bd07cf39cab0@syzkaller.appspotmail.com Suggested-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Rik van Riel <riel@surriel.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: David Rientjes <rientjes@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Rik van Riel <riel@surriel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Jan Engelhardt <jengelh@inai.de> Cc: Tim Murray <timmurray@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
and kernel will allocate 5 hugepages for node 1 instead of ignoring it.
I move the validation check earlier to fix this issue, and slightly
simplifies the condition here.
Link: https://lkml.kernel.org/r/20220209134018.8242-1-liuyuntao10@huawei.com Fixes: b5389086ad7be0 ("hugetlbfs: extend the definition of hugepages parameter to support node allocation") Signed-off-by: Liu Yuntao <liuyuntao10@huawei.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey Konovalov [Sat, 26 Feb 2022 03:10:59 +0000 (19:10 -0800)]
kasan: test: prevent cache merging in kmem_cache_double_destroy
With HW_TAGS KASAN and kasan.stacktrace=off, the cache created in the
kmem_cache_double_destroy() test might get merged with an existing one.
Thus, the first kmem_cache_destroy() call won't actually destroy it but
will only decrease the refcount. This causes the test to fail.
Provide an empty constructor for the created cache to prevent the cache
from getting merged.
Link: https://lkml.kernel.org/r/b597bd434c49591d8af00ee3993a42c609dc9a59.1644346040.git.andreyknvl@google.com Fixes: f98f966cd750 ("kasan: test: add test case for double-kmem_cache_destroy()") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kernel BUG at include/linux/mm.h:2373!
cpu 0x5d: Vector: 700 (Program Check) at [c00000003c6e76e0]
pc: c000000000581a54: pmd_to_page+0x54/0x80
lr: c00000000058d184: move_hugetlb_page_tables+0x4e4/0x5b0
sp: c00000003c6e7980
msr: 9000000000029033
current = 0xc00000003bd8d980
paca = 0xc000200fff610100 irqmask: 0x03 irq_happened: 0x01
pid = 9349, comm = hugepage-mremap
kernel BUG at include/linux/mm.h:2373!
move_hugetlb_page_tables+0x4e4/0x5b0 (link register)
move_hugetlb_page_tables+0x22c/0x5b0 (unreliable)
move_page_tables+0xdbc/0x1010
move_vma+0x254/0x5f0
sys_mremap+0x7c0/0x900
system_call_exception+0x160/0x2c0
the kernel can't use huge_pte_offset before it set the pte entry because
a page table lookup check for huge PTE bit in the page table to
differentiate between a huge pte entry and a pointer to pte page. A
huge_pte_alloc won't mark the page table entry huge and hence kernel
should not use huge_pte_offset after a huge_pte_alloc.
Link: https://lkml.kernel.org/r/20220211063221.99293-1-aneesh.kumar@linux.ibm.com Fixes: 550a7d60bd5e ("mm, hugepages: add mremap() support for hugepage backed vma") Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Mina Almasry <almasrymina@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Luis Chamberlain [Sat, 26 Feb 2022 03:10:53 +0000 (19:10 -0800)]
MAINTAINERS: add sysctl-next git tree
Add a git tree for sysctls as there's been quite a bit of work lately to
remove all the syctls out of kernel/sysctl.c and move to their respective
places, so coordination has been needed to avoid conflicts. This tree
will also help soak these changes on linux-next prior to getting to Linus.
Link: https://lkml.kernel.org/r/20220218182736.3694508-1-mcgrof@kernel.org Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / users / willy / xarray.git / log