staging: rtl8192e: Rename rtl8192_prepare_beacon

Use naming schema found in other rtlwifi devices.
Rename rtl8192_prepare_beacon to _rtl92e_prepare_beacon.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_SwChnl_WorkItem

Use naming schema found in other rtlwifi devices.
Rename rtl8192_SwChnl_WorkItem to _rtl92e_phy_switch_channel_work_item.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_phy_SwChnlStepByStep

Use naming schema found in other rtlwifi devices.
Rename rtl8192_phy_SwChnlStepByStep to _rtl92e_phy_switch_channel_step.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_phy_SetSwChnlCmdArray

Use naming schema found in other rtlwifi devices.
Rename rtl8192_phy_SetSwChnlCmdArray to _rtl92e_phy_set_sw_chnl_cmd_array.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_phy_RFSerialWrite

Use naming schema found in other rtlwifi devices.
Rename rtl8192_phy_RFSerialWrite to _rtl92e_phy_rf_write.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_phy_RFSerialRead

Use naming schema found in other rtlwifi devices.
Rename rtl8192_phy_RFSerialRead to _rtl92e_phy_rf_read.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_phy_FinishSwChnlNow

Use naming schema found in other rtlwifi devices.
Rename rtl8192_phy_FinishSwChnlNow to _rtl92e_phy_switch_channel.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_phyConfigBB

Use naming schema found in other rtlwifi devices.
Rename rtl8192_phyConfigBB to _rtl92e_phy_config_bb.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename phy_FwRFSerialWrite

Use naming schema found in other rtlwifi devices.
Rename phy_FwRFSerialWrite to _rtl92e_phy_rf_fw_write.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename phy_FwRFSerialRead

Use naming schema found in other rtlwifi devices.
Rename phy_FwRFSerialRead to _rtl92e_phy_rf_fw_read.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename fw_download_code

Use naming schema found in other rtlwifi devices.
Rename fw_download_code to _rtl92e_fw_download_code.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename CPUcheck_maincodeok_turnonCPU

Use naming schema found in other rtlwifi devices.
Rename CPUcheck_maincodeok_turnonCPU to _rtl92e_fw_boot_cpu.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename CPUcheck_firmware_ready

Use naming schema found in other rtlwifi devices.
Rename CPUcheck_firmware_ready to _rtl92e_is_fw_ready.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename MRateToHwRate8190Pci

Use naming schema found in other rtlwifi devices.
Rename MRateToHwRate8190Pci to _rtl92e_rate_mgn_to_hw.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename HwRateToMRate90

Use naming schema found in other rtlwifi devices.
Rename HwRateToMRate90 to _rtl92e_rate_hw_to_mgn.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl819x_RxCheckStuck

Use naming schema found in other rtlwifi devices.
Rename rtl819x_RxCheckStuck to _rtl92e_rx_check_stuck.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_rx_normal

Use naming schema found in other rtlwifi devices.
Rename rtl8192_rx_normal to _rtl92e_rx_normal.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl819x_TxCheckStuck

Use naming schema found in other rtlwifi devices.
Rename rtl819x_TxCheckStuck to _rtl92e_tx_check_stuck.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_is_tx_queue_empty

Use naming schema found in other rtlwifi devices.
Rename rtl8192_is_tx_queue_empty to _rtl92e_is_tx_queue_empty.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_tx_resume

Use naming schema found in other rtlwifi devices.
Rename rtl8192_tx_resume to _rtl92e_tx_resume.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_tx_timeout

Use naming schema found in other rtlwifi devices.
Rename rtl8192_tx_timeout to _rtl92e_tx_timeout.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_tx_isr

Use naming schema found in other rtlwifi devices.
Rename rtl8192_tx_isr to _rtl92e_tx_isr.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_tx_cmd

Use naming schema found in other rtlwifi devices.
Rename rtl8192_tx_cmd to _rtl92e_tx_cmd.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_tx

Use naming schema found in other rtlwifi devices.
Rename rtl8192_tx to _rtl92e_tx.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_free_tx_ring

Use naming schema found in other rtlwifi devices.
Rename rtl8192_free_tx_ring to _rtl92e_free_tx_ring.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_free_rx_ring

Use naming schema found in other rtlwifi devices.
Rename rtl8192_free_rx_ring to _rtl92e_free_rx_ring.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_alloc_tx_desc_ring

Use naming schema found in other rtlwifi devices.
Rename rtl8192_alloc_tx_desc_ring to _rtl92e_alloc_tx_ring.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_alloc_rx_desc_ring

Use naming schema found in other rtlwifi devices.
Rename rtl8192_alloc_rx_desc_ring to _rtl92e_alloc_rx_ring.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_pci_probe

Use naming schema found in other rtlwifi devices.
Rename rtl8192_pci_probe to _rtl92e_pci_probe.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_pci_module_init

Use naming schema found in other rtlwifi devices.
Rename rtl8192_pci_module_init to _rtl92e_pci_module_init.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_pci_module_exit

Use naming schema found in other rtlwifi devices.
Rename rtl8192_pci_module_exit to _rtl92e_pci_module_exit.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_pci_initdescring

Use naming schema found in other rtlwifi devices.
Rename rtl8192_pci_initdescring to _rtl92e_pci_initdescring.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_pci_disconnect

Use naming schema found in other rtlwifi devices.
Rename rtl8192_pci_disconnect to _rtl92e_pci_disconnect.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename _rtl8192_up

Use naming schema found in other rtlwifi devices.
Rename _rtl8192_up to _rtl92e_up.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_up

Use naming schema found in other rtlwifi devices.
Rename rtl8192_up to _rtl92e_try_up.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_restart

Use naming schema found in other rtlwifi devices.
Rename rtl8192_restart to _rtl92e_restart.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_down

Use naming schema found in other rtlwifi devices.
Rename rtl8192_down to _rtl92e_down.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_close

Use naming schema found in other rtlwifi devices.
Rename rtl8192_close to _rtl92e_close.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_open

Use naming schema found in other rtlwifi devices.
Rename rtl8192_open to _rtl92e_open.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_ioctl

Use naming schema found in other rtlwifi devices.
Rename rtl8192_ioctl to _rtl92e_ioctl.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_irq_tx_tasklet

Use naming schema found in other rtlwifi devices.
Rename rtl8192_irq_tx_tasklet to _rtl92e_irq_tx_tasklet.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_irq_rx_tasklet

Use naming schema found in other rtlwifi devices.
Rename rtl8192_irq_rx_tasklet to _rtl92e_irq_rx_tasklet.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_interrupt

Use naming schema found in other rtlwifi devices.
Rename rtl8192_interrupt to _rtl92e_irq.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_init_priv_variable

Use naming schema found in other rtlwifi devices.
Rename rtl8192_init_priv_variable to _rtl92e_init_priv_variable.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_init_priv_task

Use naming schema found in other rtlwifi devices.
Rename rtl8192_init_priv_task to _rtl92e_init_priv_task.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_init_priv_lock

Use naming schema found in other rtlwifi devices.
Rename rtl8192_init_priv_lock to _rtl92e_init_priv_lock.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_init_priv_handler

Use naming schema found in other rtlwifi devices.
Rename rtl8192_init_priv_handler to _rtl92e_init_priv_handler.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_init_priv_constant

Use naming schema found in other rtlwifi devices.
Rename rtl8192_init_priv_constant to _rtl92e_init_priv_constant.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Rename rtl8192_init

Use naming schema found in other rtlwifi devices.
Rename rtl8192_init to _rtl92e_init.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: hook up 8254 timer/counter subdevice

There is a standard 8254 Timer/Counter device on the board. Hook up
the subdevice for the user.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: use DIV_ROUND_CLOSEST and DIV_ROUND_UP macros

Use the macros to clarify the divisor calculations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: tidy up block comments

Use the preferred block command style.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: remove unnecessary function desc. block comments

These function description comments are cut-and-paste cruft from the
old skeleton driver. Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: fix rtd_ao_winsn()

The "comedi range and offset conversions" in this function is
incorrect. According to the hardware manual, the DAC registers
are defined as:

    | D15  | D14-D03     | D02 | | D01 | D00 |
    | Sign | 12-bit data | (see manual)      |

The extended 'Sign' bit is only used for bipolar ranges to indicate
negative 12-bit data values.

The current code actually flips the sign for all bipolar data
values instead of just munging the value to 2's complement and
extending the sign bit.

Fix the function to correctly munge the comedi offset binary
values into 2's complement and extended the sign when bipolar
ranges are specified.

For aesthetics, rename this function and tidy it up a bit.

Save the readback value after the conversion is complete.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: convert DAC register defines to macros

For aesthetics, convert the defines for the various DAC registers into
macros that take the comedi channel and return the correct offset.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: remove unnecessary comments from rtd_ao_winsn()

These comments are cut-and-paste from the old skeleton driver. Remove
them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: move constants to right side of comparisons

Fix the checkpatch.pl issues about:

WARNING: Comparisons should place the constant on the right side of the test

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: rename rtd520Boards

For aesthetics, rename this CamelCase array.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd529: usleep_range is preferred over udelay

Fix checkpatch issue: "CHECK: usleep_range is preferred over udelay; see
Documentation/timers/timers-howto.txt".  `udelay()` is only used in the
firmware upload process.  Replace them with `usleep_range()` with a
reasonable upper limit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: fix logical continuations

Fix the checkpatch.pl issues about:

CHECK: Logical continuations should be on the previous line

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: prefer using the BIT macro

Use the BIT macro to define the register bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_pci.c: improve function documentation

Expand the descriptions of the functions and document the return values.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rti800: use comedi_offset_munge()

Use the comedi_offset_munge() helper to do the two's complement
to comedi offset binary and comedi offset binary to two's complement
conversions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rti800: prefer using the BIT macro

Use the BIT macro to define the register bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops.c: Tweak kernel-doc for consistency

Adjust the kernel-doc in this file for consistency of capitalization and
punctuation.  Make more use of the special kernel-doc markers for
parameter names, constant names, etc.  Use the correct kernel-doc tag
for the return values sections.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_buf.c: document remaining exported functions

Add kernel-doc headers to the remaining functions marked for export.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_buf.c: tweak existing kernel-doc

Expand the kernel-doc descriptions of those exported functions that
already have kernel-doc comments.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedidev.h: document remaining inline functions

Add kernel-doc headers to the inline functions that do not have them
yet.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedidev.h: tweak docs for inline functions

Tweak the kernel-doc for already documented inline functions for
consistency, and document their return values.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedidev.h: tweak struct comedi_async documentation

Make the kernel-doc layout for `struct comedi_async` more consistent
with the documentation for the other COMEDI data types.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedidev.h: document struct comedi_lrange

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedidev.h: document struct comedi_buf_map

Add kernel-doc for `struct comedi_buf_map` and the associated `struct
comedi_buf_page`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedidev.h: document struct comedi_subdevice

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedidev.h: document struct comedi_device

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedidev.h: document struct comedi_driver

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedidev.h: tweak kernel-doc for struct comedi_async

Tweak the formatting of the kernel-doc formatted comment for `struct
comedi_async` in order to stop it generating bogus headings for text
before a colon.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedidev.h: use enum for COMEDI_CB_... constants

The existing constants `COMEDI_CB_EOS` etc. are in the form of macros
and have a bogus kernel-doc comment.  Change them to `enum` constants so
they can be documented properly with kernel-doc.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedidev.h: reformat copyright comment

Use the preferred block comment style.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: drivers.c: document exported functions

Add missing kernel-doc to the low-level COMEDI driver API functions
exported from "drivers.c" and tart up some of the existing kernel-doc
comments for consistency.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: drivers.c: replace #include <linux/dma-mapping.h>

Comedi's "drivers.c" doesn't use anything from `<linux/dma-mapping.h>`,
but it does use `DMA_NONE` from `<linux/dma-direction.h>`, so replace
the appropriate `#include` directive.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: drivers.c: remove irrelevant #includes

Comedi's "drivers.c" doesn't use anything from these included headers,
so remove them.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: fix pcm_write input/output error

This patch keeps the process from sleeping after the PCM middle layer has
stopped playback by calling the pcm trigger callback. The patch is needed
to prevent aplay from causing a pcm_write Input/Output error.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: add poll syscall to AIM cdev

This patch adds the implementation of the poll syscall to the AIM cdev.
To have the full functionality, a helper function is needed in the
core module to retrieve the instantaneous availability of tx buffers.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: remove audio resolution format check

This patch removes the audio format cross-check, because the definitions
are not compatible.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: fix style problems

This patch simply corrects style violations.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: move initialization code

This pathch moves the initialization of the PCM middle layer hardware
parameters to function audio_set_hw_params().

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: rename function

This patch renames the function audio_set_pcm_format(). Since the
function doesn't only set the PCM format anymore and to guard against
misunderstandings, its name needs to be changed.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: add missing channel initialization

This patch adds missing initialization of channel count for 8-bit mono
audio resolution.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: purge unecessary variable

This patch purges a temp. variable to store the functions return value.
Since the content is never being evaluated, it can safely be removed.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: squash AIM sound

This patch removes debug messages and prevents the sound AIM from being
noisy in kernel log.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: make hardware parameters channel exclusive

Since the PCM interface's hardware parameters are channel/substream
exclusive, the struct snd_pcm_hardware needs to be embedded in the
channel structure.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: include vendor in audio card's shortname

This patch adds Microchip as vendor to the audio card's shortname to
be displayed, when playback and capture devices are queried.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: add multi channel support to sound AIM

This patch adds 5.1 surround configuration with subbuffer cross-check,
when establishing a link to the core. For the sake of simplicity, only
one specific channel configuration is allowed.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: refactor channel structure

The struct most_c_obj has the same set of attributes for each of two AIMs.
This patch cleans up the code by introducing the new struct most_c_aim_obj
hat contains those fields.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: add fair buffer distribution

This patch ensures a fair distribution of buffers, when two AIMs share a
single channel. The AIMs then won't be able to use more than half of all
pre-allocated buffers of the linked channel. However, in case the channel
is not shared, the AIM can exclusively use all available buffers.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: consolidate code

The function drci_rd_reg() always delivers little endian representation of
the 16-bit DCI register. The value returned by this function must always be
carefully converted from __le16 to u16 type. This patch moves all those
conversions to the function itself.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: prevent DMA on stack

This patch is needed to avoid having DMA on the stack.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: simplify code

This patch simply rearranges code for better readability.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: fix MAC address representation

This patch fixes the representation of the MAC address within the HDM USB
module.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: fix buffer size for DIM2

This patch reduces the DBR buffer size to prevent an overflow in the DIM2
module. It is needed, because the MediaLB hardware has problems with DBR
buffers that exceed the size of 255 messages.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>