Filipe Manana [Wed, 22 May 2024 08:26:44 +0000 (09:26 +0100)]
btrfs: add and use helper to commit the current transaction
We have several places that attach to the current transaction with
btrfs_attach_transaction_barrier() and then commit the transaction if
there is one. Add a helper and use it to deduplicate this pattern.
Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Tue, 21 May 2024 16:08:06 +0000 (17:08 +0100)]
btrfs: scrub: avoid create/commit empty transaction at finish_extent_writes_for_zoned()
At finish_extent_writes_for_zoned() we use btrfs_join_transaction() to
catch any running transaction and then commit it. This will however create
a new and empty transaction in case there's no running transaction anymore
(got committed by the transaction kthread or other task for example) or
there's a running transaction finishing its commit and with a state >=
TRANS_STATE_UNBLOCKED. In the former case we don't need to do anything
while in the second case we just need to wait for the transaction to
complete its commit.
So improve this by using btrfs_attach_transaction_barrier() instead, which
does not create a new transaction if there's none running, and if there's
a current transaction that is committing, it will wait for it to fully
commit and not create a new transaction. This helps avoiding creating and
committing empty transactions, saving IO, time and unnecessary rotation of
the backup roots in the super block.
Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Tue, 21 May 2024 10:57:37 +0000 (11:57 +0100)]
btrfs: send: avoid create/commit empty transaction at ensure_commit_roots_uptodate()
At ensure_commit_roots_uptodate() we use btrfs_join_transaction() to
catch any running transaction and then commit it. This will however create
a new and empty transaction in case there's no running transaction anymore
(got committed by the transaction kthread or other task for example) or
there's a running transaction finishing its commit and with a state >=
TRANS_STATE_UNBLOCKED. In the former case we don't need to do anything
while in the second case we just need to wait for the transaction to
complete its commit.
So improve this by using btrfs_attach_transaction_barrier() instead, which
does not create a new transaction if there's none running, and if there's
a current transaction that is committing, it will wait for it to fully
commit and not create a new transaction. This helps avoiding creating and
committing empty transactions, saving IO, time and unnecessary rotation of
the backup roots in the super block.
Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Tue, 21 May 2024 10:20:54 +0000 (11:20 +0100)]
btrfs: send: make ensure_commit_roots_uptodate() simpler and more efficient
Before starting a send operation we have to make sure that every root has
its commit root matching the regular root, to that send doesn't find stale
inodes in the commit root (inodes that were deleted in the regular root)
and fails the inode lookups with -ESTALE.
Currently we keep looking for roots used by the send operation and as soon
as we find one we commit the current transaction (or a new one since
btrfs_join_transaction() creates one if there isn't any running or the
running one is in a state >= TRANS_STATE_UNBLOCKED). It's pointless to
keep looking until we don't find any, because after the first transaction
commit all the other roots are updated too, as they were already tagged in
the fs_info->fs_roots_radix radix tree when they were modified in order to
have a commit root different from the regular root.
Currently we are also always passing the main send root into
btrfs_join_transaction(), which despite not having any functional issue,
it is not optimal because in case the root wasn't modified we end up
adding it to fs_info->fs_roots_radix and then update its root item in the
root tree when committing the transaction, causing unnecessary work.
So simplify and make this more efficient by removing the looping and by
passing the first root we found that is modified as the argument to
btrfs_join_transaction().
Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Tue, 21 May 2024 09:45:27 +0000 (10:45 +0100)]
btrfs: avoid create and commit empty transaction when committing super
At btrfs_commit_super(), called in a few contexts such as when unmounting
a filesystem, we use btrfs_join_transaction() to catch any running
transaction and then commit it. This will however create a new and empty
transaction in case there's no running transaction or there's a running
transaction with a state >= TRANS_STATE_UNBLOCKED.
As we just want to be sure that any existing transaction is fully
committed, we can use btrfs_attach_transaction_barrier() instead of
btrfs_join_transaction(), therefore avoiding the creation and commit of
empty transactions, which only waste IO and causes rotation of the
precious backup roots.
Example where we create and commit a pointless empty transaction:
The transaction with id 8 was pointless, an empty transaction that did
not achieve anything.
Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Mon, 20 May 2024 12:21:12 +0000 (13:21 +0100)]
btrfs: qgroup: avoid start/commit empty transaction when flushing reservations
When flushing reservations we are using btrfs_join_transaction() to get a
handle for the current transaction and then commit it to try to release
space. However btrfs_join_transaction() has some undesirable consequences:
1) If there's no running transaction, it will create one, and we will
commit it right after. This is unnecessary because it will not release
any space, and it will result in unnecessary IO and rotation of backup
roots in the superblock;
2) If there's a current transaction and that transaction is committing
(its state is >= TRANS_STATE_COMMIT_DOING), it will wait for that
transaction to almost finish its commit (for its state to be >=
TRANS_STATE_UNBLOCKED) and then start and return a new transaction.
We will then commit that new transaction, which is pointless because
all we wanted was to wait for the current (previous) transaction to
fully finish its commit (state == TRANS_STATE_COMPLETED), and by
starting and committing a new transaction we are wasting IO too and
causing unnecessary rotation of backup roots in the superblock.
So improve this by using btrfs_attach_transaction_barrier() instead, which
does not create a new transaction if there's none running, and if there's
a current transaction that is committing, it will wait for it to fully
commit and not create a new transaction.
Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Currently if we fully clean a subvolume (not only delete its directory,
but fully clean all it's related data and root item), the associated
qgroup would not be removed.
We have "btrfs qgroup clear-stale" to handle such 0 level qgroups.
Change the behavior to automatically removie the qgroup of a fully
cleaned subvolume when possible:
- Full qgroup but still consistent
We can and should remove the qgroup.
The qgroup numbers should be 0, without any rsv.
- Full qgroup but inconsistent
Can happen with drop_subtree_threshold feature (skip accounting
and mark qgroup inconsistent).
We can and should remove the qgroup.
Higher level qgroup numbers will be incorrect, but since qgroup
is already inconsistent, it should not be a problem.
- Squota mode
This is the special case, we can only drop the qgroup if its numbers
are all 0.
This would be handled by can_delete_qgroup(), so we only need to check
the return value and ignore the -EBUSY error.
Link: https://bugzilla.suse.com/show_bug.cgi?id=1222847 Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
btrfs: slightly loosen the requirement for qgroup removal
[BUG]
Currently if one is utilizing "qgroups/drop_subtree_threshold" sysfs,
and a snapshot with level higher than that value is dropped, we will
not be able to delete the qgroup until next qgroup rescan:
The final qgroup removal would fail with the following error:
ERROR: unable to destroy quota group: Device or resource busy
[CAUSE]
The above script would generate a subvolume of level 2, then snapshot
it, enable qgroup, set the drop_subtree_threshold, then drop the
snapshot.
Since the subvolume drop would meet the threshold, qgroup would be
marked inconsistent and skip accounting to avoid hanging the system at
transaction commit.
But currently we do not allow a qgroup with any rfer/excl numbers to be
dropped, and this is not really compatible with the new
drop_subtree_threshold behavior.
[FIX]
Only require the strict zero rfer/excl/rfer_cmpr/excl_cmpr for squota
mode. This is due to the fact that squota can never go inconsistent,
and it can have dropped subvolume but with non-zero qgroup numbers for
future accounting.
For full qgroup mode, we only check if there is a subvolume for it.
Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Mon, 20 May 2024 18:49:18 +0000 (20:49 +0200)]
btrfs: constify parameters of write_eb_member() and its users
Reported by 'gcc -Wcast-qual', the argument from which write_extent_buffer()
reads data to write to the eb should be const. In addition the const
needs to be also added to __write_extent_buffer() local buffers.
All callers of write_eb_member() can now be updated to use const for the
input buffer structure or type.
Reviewed-by: Boris Burkov <boris@bur.io> Reviewed-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Mon, 20 May 2024 18:19:53 +0000 (20:19 +0200)]
btrfs: remove unused define EXTENT_SIZE_PER_ITEM
This was added in c61a16a701a126 ("Btrfs: fix the confusion between
delalloc bytes and metadata bytes") and removed in 03fe78cc2942c5
("btrfs: use delalloc_bytes to determine flush amount for
shrink_delalloc") where the calculation was reworked to use a
non-constant numbers. This was found by 'make W=2'.
Reviewed-by: Boris Burkov <boris@bur.io> Reviewed-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Mon, 20 May 2024 17:46:44 +0000 (19:46 +0200)]
btrfs: use for-local variables that shadow function variables
We've started to use for-loop local variables and in a few places this
shadows a function variable. Convert a few cases reported by 'make W=2'.
If applicable also change the style to post-increment, that's the
preferred one.
Reviewed-by: Boris Burkov <boris@bur.io> Reviewed-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Mon, 20 May 2024 17:49:17 +0000 (19:49 +0200)]
btrfs: rename macro local variables that clash with other variables
Fix variable names in two macros where there's a local function variable
of the same name. In subpage_calc_start_bit() it's in several callers,
in btrfs_abort_transaction() it's only in replace_file_extents().
Found by 'make W=2'.
Reviewed-by: Boris Burkov <boris@bur.io> Reviewed-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Mon, 20 May 2024 17:40:26 +0000 (19:40 +0200)]
btrfs: remove duplicate name variable declarations
When running 'make W=2' there are a few reports where a variable of the
same name is declared in a nested block. In all the cases we can use the
one declared in the parent block, no problematic cases were found.
Reviewed-by: Boris Burkov <boris@bur.io> Reviewed-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Sat, 18 May 2024 17:22:03 +0000 (18:22 +0100)]
btrfs: use a btrfs_inode local variable at btrfs_sync_file()
Instead of using a VFS inode local pointer and then doing many BTRFS_I()
calls inside btrfs_sync_file(), use a btrfs_inode pointer instead. This
makes everything a bit easier to read and less confusing, allowing to
make some statements shorter.
Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Sat, 18 May 2024 17:14:06 +0000 (18:14 +0100)]
btrfs: pass a btrfs_inode to btrfs_wait_ordered_range()
Instead of passing a (VFS) inode pointer argument, pass a btrfs_inode
instead, as this is generally what we do for internal APIs, making it
more consistent with most of the code base. This will later allow to
help to remove a lot of BTRFS_I() calls in btrfs_sync_file().
Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Sat, 18 May 2024 17:01:47 +0000 (18:01 +0100)]
btrfs: pass a btrfs_inode to btrfs_fdatawrite_range()
Instead of passing a (VFS) inode pointer argument, pass a btrfs_inode
instead, as this is generally what we do for internal APIs, making it
more consistent with most of the code base. This will later allow to
help to remove a lot of BTRFS_I() calls in btrfs_sync_file().
Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Sat, 18 May 2024 13:09:41 +0000 (14:09 +0100)]
btrfs: use a btrfs_inode in the log context (struct btrfs_log_ctx)
Instead of using a inode pointer, use a btrfs_inode pointer in the log
context structure, as this is generally what we need and allows for some
internal APIs to take a btrfs_inode instead, making them more consistent
with most of the code base. This will later allow to help to remove a lot
of BTRFS_I() calls in btrfs_sync_file().
Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Wed, 15 May 2024 12:54:14 +0000 (13:54 +0100)]
btrfs: make btrfs_finish_ordered_extent() return void
Currently btrfs_finish_ordered_extent() returns a boolean indicating if
the ordered extent was added to the work queue for completion, but none
of its callers cares about it, so make it return void.
Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Sun, 19 May 2024 00:14:56 +0000 (08:14 +0800)]
btrfs: move btrfs_block_group_root() to block-group.c
The function btrfs_block_group_root() is declared in disk-io.c; however,
all its callers are in block-group.c. Move it to the latter file and
declare it static.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Thu, 16 May 2024 03:10:23 +0000 (11:10 +0800)]
btrfs: drop bytenr_orig and fix comment in btrfs_scan_one_device()
Drop the single-use variable bytenr_orig and instead use btrfs_sb_offset()
in the function argument passing.
Fix a stale comment about not automatically fixing a bad primary
superblock from the backup mirror copies. Also, move the comment closer
to where the primary superblock read occurs.
Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Fri, 10 May 2024 16:41:04 +0000 (17:41 +0100)]
btrfs: use a regular rb_root instead of cached rb_root for extent_map_tree
We are currently using a cached rb_root (struct rb_root_cached) for the
rb root of struct extent_map_tree. This doesn't offer much of an advantage
here because:
1) It's only advantage over the regular rb_root is that it caches a
pointer to the left most node (first node), so a call to
rb_first_cached() doesn't have to chase pointers until it reaches
the left most node;
2) We only have two scenarios that access left most node with
rb_first_cached():
When dropping all extent maps from an inode, during inode eviction;
When iterating over extent maps during the extent map shrinker;
3) In both cases we keep removing extent maps, which causes deletion of
the left most node so rb_erase_cached() has to call rb_next() to find
out what's the next left most node and assign it to
struct rb_root_cached::rb_leftmost;
4) We can do that ourselves in those two uses cases and stop using a
rb_root_cached rb tree and use instead a regular rb_root rb tree.
This reduces the size of struct extent_map_tree by 8 bytes and, since
this structure is embedded in struct btrfs_inode, it also reduces the
size of that structure by 8 bytes.
So on a 64 bits platform the size of btrfs_inode is reduced from 1032
bytes down to 1024 bytes.
This means we will be able to have 4 inodes per 4K page instead of 3.
Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Sun, 5 May 2024 12:47:02 +0000 (13:47 +0100)]
btrfs: remove objectid from struct btrfs_inode on 64 bits platforms
On 64 bits platforms we don't really need to have a dedicated member (the
objectid field) for the inode's number since we store in the VFS inode's
i_ino member, which is an unsigned long and this type is 64 bits wide on
64 bits platforms. We only need that field in case we are on a 32 bits
platform because the unsigned long type is 32 bits wide on such platforms
See commit 33345d01522f ("Btrfs: Always use 64bit inode number") regarding
this 64/32 bits detail.
The objectid field of struct btrfs_inode is also used to store the ID of
a root for directories that are stubs for unreferenced roots. In such
cases the inode is a directory and has the BTRFS_INODE_ROOT_STUB runtime
flag set.
So in order to reduce the size of btrfs_inode structure on 64 bits
platforms we can remove the objectid member and use the VFS inode's i_ino
member instead whenever we need to get the inode number. In case the inode
is a root stub (BTRFS_INODE_ROOT_STUB set) we can use the member
last_reflink_trans to store the ID of the unreferenced root, since such
inode is a directory and reflinks can't be done against directories.
So remove the objectid fields for 64 bits platforms and alias the
last_reflink_trans field with a name of ref_root_id in a union.
On a release kernel config, this reduces the size of struct btrfs_inode
from 1040 bytes down to 1032 bytes.
Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Fri, 3 May 2024 17:10:06 +0000 (18:10 +0100)]
btrfs: remove location key from struct btrfs_inode
Currently struct btrfs_inode has a key member, named "location", that is
either:
1) The key of the inode's item. In this case the objectid is the number
of the inode;
2) A key stored in a dir entry with a type of BTRFS_ROOT_ITEM_KEY, for
the case where we have a root that is a snapshot of a subvolume that
points to other subvolumes. In this case the objectid is the ID of
a subvolume inside the snapshotted parent subvolume.
The key is only used to lookup the inode item for the first case, while
for the second it's never used since it corresponds to directory stubs
created with new_simple_dir() and which are marked as dummy, so there's
no actual inode item to ever update. In the second case we only check
the key type at btrfs_ino() for 32 bits platforms and its objectid is
only needed for unlink.
Instead of using a key we can do fine with just the objectid, since we
can generate the key whenever we need it having only the objectid, as
in all use cases the type is always BTRFS_INODE_ITEM_KEY and the offset
is always 0.
So use only an objectid instead of a full key. This reduces the size of
struct btrfs_inode from 1048 bytes down to 1040 bytes on a release kernel.
Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Tue, 30 Apr 2024 15:52:27 +0000 (16:52 +0100)]
btrfs: don't allocate file extent tree for non regular files
When not using the NO_HOLES feature we always allocate an io tree for an
inode's file_extent_tree. This is wasteful because that io tree is only
used for regular files, so we allocate more memory than needed for inodes
that represent directories or symlinks for example, or for inodes that
correspond to free space inodes.
So improve on this by allocating the io tree only for inodes of regular
files that are not free space inodes.
Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Tue, 30 Apr 2024 09:55:05 +0000 (10:55 +0100)]
btrfs: unify index_cnt and csum_bytes from struct btrfs_inode
The index_cnt field of struct btrfs_inode is used only for two purposes:
1) To store the index for the next entry added to a directory;
2) For the data relocation inode to track the logical start address of the
block group currently being relocated.
For the relocation case we use index_cnt because it's not used for
anything else in the relocation use case - we could have used other fields
that are not used by relocation such as defrag_bytes, last_unlink_trans
or last_reflink_trans for example (among others).
Since the csum_bytes field is not used for directories, do the following
changes:
1) Put index_cnt and csum_bytes in a union, and index_cnt is only
initialized when the inode is a directory. The csum_bytes is only
accessed in IO paths for regular files, so we're fine here;
2) Use the defrag_bytes field for relocation, since the data relocation
inode is never used for defrag purposes. And to make the naming better,
alias it to reloc_block_group_start by using a union.
This reduces the size of struct btrfs_inode by 8 bytes in a release
kernel, from 1056 bytes down to 1048 bytes.
Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Mon, 6 May 2024 12:27:29 +0000 (13:27 +0100)]
btrfs: remove inode_lock from struct btrfs_root and use xarray locks
Currently we use the spinlock inode_lock from struct btrfs_root to
serialize access to two different data structures:
1) The delayed inodes xarray (struct btrfs_root::delayed_nodes);
2) The inodes xarray (struct btrfs_root::inodes).
Instead of using our own lock, we can use the spinlock that is part of the
xarray implementation, by using the xa_lock() and xa_unlock() APIs and
using the xarray APIs with the double underscore prefix that don't take
the xarray locks and assume the caller is using xa_lock() and xa_unlock().
So remove the spinlock inode_lock from struct btrfs_root and use the
corresponding xarray locks. This brings 2 benefits:
1) We reduce the size of struct btrfs_root, from 1336 bytes down to
1328 bytes on a 64 bits release kernel config;
2) We reduce lock contention by not using anymore the same lock for
changing two different and unrelated xarrays.
Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Mon, 29 Apr 2024 13:01:09 +0000 (14:01 +0100)]
btrfs: reduce nesting and deduplicate error handling at btrfs_iget_path()
Make btrfs_iget_path() simpler and easier to read by avoiding nesting of
if-then-else statements and having an error label to do all the error
handling instead of repeating it a couple times.
Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Mon, 29 Apr 2024 12:08:12 +0000 (13:08 +0100)]
btrfs: preallocate inodes xarray entry to avoid transaction abort
When creating a new inode, at btrfs_create_new_inode(), one of the very
last steps is to add the inode to the root's inodes xarray. This often
requires allocating memory which may fail (even though xarrays have a
dedicated kmem_cache which make it less likely to fail), and at that point
we are forced to abort the current transaction (as some, but not all, of
the inode metadata was added to its subvolume btree).
To avoid a transaction abort, preallocate memory for the xarray early at
btrfs_create_new_inode(), so that if we fail we don't need to abort the
transaction and the insertion into the xarray is guaranteed to succeed.
Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Wed, 24 Apr 2024 15:58:01 +0000 (16:58 +0100)]
btrfs: use an xarray to track open inodes in a root
Currently we use a red black tree (rb-tree) to track the currently open
inodes of a root (in struct btrfs_root::inode_tree). This however is not
very efficient when the number of inodes is large since rb-trees are
binary trees. For example for 100K open inodes, the tree has a depth of
17. Besides that, inserting into the tree requires navigating through it
and pulling useless cache lines in the process since the red black tree
nodes are embedded within the btrfs inode - on the other hand, by being
embedded, it requires no extra memory allocations.
We can improve this by using an xarray instead, which is efficient when
indices are densely clustered (such as inode numbers), is more cache
friendly and behaves like a resizable array, with a much better search
and insertion complexity than a red black tree. This only has one small
disadvantage which is that insertion will sometimes require allocating
memory for the xarray - which may fail (not that often since it uses a
kmem_cache) - but on the other hand we can reduce the btrfs inode
structure size by 24 bytes (from 1080 down to 1056 bytes) after removing
the embedded red black tree node, which after the next patches will allow
to reduce the size of the structure to 1024 bytes, meaning we will be able
to store 4 inodes per 4K page instead of 3 inodes.
This change does a straightforward change to use an xarray, and results
in a transaction abort if we can't allocate memory for the xarray when
creating an inode - but the next patch changes things so that we don't
need to abort.
Running the following fs_mark test showed some improvements:
The test was run with a release kernel config (Debian's default config).
Also capturing the insertion times into the rb tree and into the xarray,
that is measuring the duration of the old function inode_tree_add() and
the duration of the new btrfs_add_inode_to_root() function, gave the
following results (in nanoseconds):
Before this patch, inode_tree_add() execution times:
Qu Wenruo [Tue, 14 May 2024 09:02:13 +0000 (18:32 +0930)]
btrfs: raid56: do extra dumping for CONFIG_BTRFS_ASSERT
There are several hard-to-hit ASSERT()s hit inside raid56.
Unfortunately the ASSERT() expression is a little complex, and except
the ASSERT(), there is nothing to provide any clue.
Considering if race is involved, it's pretty hard to reproduce.
Meanwhile sometimes the dump of the rbio structure can provide some
pretty good clues, it's worth to do the extra multi-line dump for
btrfs raid56 related code.
Filipe Manana [Tue, 14 May 2024 12:19:12 +0000 (13:19 +0100)]
btrfs: fix function name in comment for btrfs_remove_ordered_extent()
Due to a refactoring introduced by commit 53d9981ca20e ("btrfs: split
btrfs_alloc_ordered_extent to allocation and insertion helpers"), the
function btrfs_alloc_ordered_extent() was renamed to
alloc_ordered_extent(), so the comment at btrfs_remove_ordered_extent()
is no longer very accurate. Update the comment to refer to the new
name "alloc_ordered_extent()".
Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Mon, 13 May 2024 17:05:47 +0000 (18:05 +0100)]
btrfs: remove no longer used btrfs_migrate_to_delayed_refs_rsv()
The function btrfs_migrate_to_delayed_refs_rsv() is no longer used.
Its last use was removed in commit 2f6397e448e6 ("btrfs: don't refill
whole delayed refs block reserve when starting transaction").
So remove the function.
Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Tue, 7 May 2024 22:50:16 +0000 (23:50 +0100)]
btrfs: zoned: make btrfs_get_dev_zone() static
It's not used outside zoned.c, so make it static.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Johannes Thumshirn [Wed, 8 May 2024 11:14:47 +0000 (13:14 +0200)]
btrfs: pass struct btrfs_io_geometry into handle_ops_on_dev_replace()
Passing in a 'struct btrfs_io_geometry into handle_ops_on_dev_replace
can reduce the number of arguments by two.
No functional changes otherwise.
Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Thu, 2 May 2024 21:11:33 +0000 (23:11 +0200)]
btrfs: qgroup: do quick checks if quotas are enabled before starting ioctls
The ioctls that add relations, create qgroups or set limits start/join
transaction. When quotas are not enabled this is not necessary, there
will be errors reported back anyway but this could be also misleading
and we should really report that quotas are not enabled. For that use
-ENOTCONN.
The helper is meant to do a quick check before any other standard ioctl
checks are done. If quota is disabled meanwhile we still rely on proper
locking inside any active operation changing the qgroup structures.
Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A set of clk fixes for the Qualcomm, Mediatek, and Allwinner drivers:
- Fix the Qualcomm Stromer Plus PLL set_rate() clk_op to explicitly
set the alpha enable bit and not set bits that don't exist
- Mark Qualcomm IPQ9574 crypto clks as voted to avoid stuck clk
warnings
- Fix the parent of some PLLs on Qualcomm sm6530 so their rate is
correct
- Fix the min/max rate clamping logic in the Allwinner driver that
got broken in v6.9
- Limit runtime PM enabling in the Mediatek driver to only
mt8183-mfgcfg so that system wide resume doesn't break on other
Mediatek SoCs"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: mediatek: mt8183: Only enable runtime PM on mt8183-mfgcfg
clk: sunxi-ng: common: Don't call hw_to_ccu_common on hw without common
clk: qcom: gcc-ipq9574: Add BRANCH_HALT_VOTED flag
clk: qcom: apss-ipq-pll: remove 'config_ctl_hi_val' from Stromer pll configs
clk: qcom: clk-alpha-pll: set ALPHA_EN bit for Stromer Plus PLLs
clk: qcom: gcc-sm6350: Fix gpll6* & gpll7 parents
Merge tag 'powerpc-6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix unnecessary copy to 0 when kernel is booted at address 0
- Fix usercopy crash when dumping dtl via debugfs
- Avoid possible crash when PCI hotplug races with error handling
- Fix kexec crash caused by scv being disabled before other CPUs
call-in
- Fix powerpc selftests build with USERCFLAGS set
Thanks to Anjali K, Ganesh Goudar, Gautam Menghani, Jinglin Wen,
Nicholas Piggin, Sourabh Jain, Srikar Dronamraju, and Vishal Chourasia.
* tag 'powerpc-6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix build with USERCFLAGS set
powerpc/pseries: Fix scv instruction crash with kexec
powerpc/eeh: avoid possible crash when edev->pdev changes
powerpc/pseries: Whitelist dtl slub object for copying to userspace
powerpc/64s: Fix unnecessary copy to 0 when kernel is booted at address 0
Merge tag 'i2c-for-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"An i2c driver fix"
* tag 'i2c-for-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr
Michael Ellerman [Sat, 6 Jul 2024 12:08:33 +0000 (22:08 +1000)]
selftests/powerpc: Fix build with USERCFLAGS set
Currently building the powerpc selftests with USERCFLAGS set to anything
causes the build to break:
$ make -C tools/testing/selftests/powerpc V=1 USERCFLAGS=-Wno-error
...
gcc -Wno-error cache_shape.c ...
cache_shape.c:18:10: fatal error: utils.h: No such file or directory
18 | #include "utils.h"
| ^~~~~~~~~
compilation terminated.
This happens because the USERCFLAGS are added to CFLAGS in lib.mk, which
causes the check of CFLAGS in powerpc/flags.mk to skip setting CFLAGS at
all, resulting in none of the usual CFLAGS being passed. That can
be seen in the output above, the only flag passed to the compiler is
-Wno-error.
Fix it by dropping the conditional setting of CFLAGS in flags.mk.
Instead always set CFLAGS, but also append USERCFLAGS if they are set.
Note that appending to CFLAGS (with +=) wouldn't work, because flags.mk
is included by multiple Makefiles (to support partial builds), causing
CFLAGS to be appended to multiple times. Additionally that would place
the USERCFLAGS prior to the standard CFLAGS, meaning the USERCFLAGS
couldn't override the standard flags. Being able to override the
standard flags is desirable, for example for adding -Wno-error.
With the fix in place, the CFLAGS are set correctly, including the
USERCFLAGS:
Merge tag 'integrity-v6.10-fix' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fix from Mimi Zohar:
"A single bug fix to properly remove all of the securityfs IMA
measurement lists"
* tag 'integrity-v6.10-fix' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: fix wrong zero-assignment during securityfs dentry remove
Merge tag 'pci-v6.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci update from Bjorn Helgaas:
- Update MAINTAINERS and CREDITS to credit Gustavo Pimentel with the
Synopsys DesignWare eDMA driver and reflect that he is no longer at
Synopsys and isn't in a position to maintain the DesignWare xData
traffic generator (Bjorn Helgaas)
* tag 'pci-v6.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
CREDITS: Add Synopsys DesignWare eDMA driver for Gustavo Pimentel
MAINTAINERS: Orphan Synopsys DesignWare xData traffic generator
Merge tag 'riscv-for-linus-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for the CMODX example in the recently added icache flushing
prctl()
- A fix to the perf driver to avoid corrupting event data on counter
overflows when external overflow handlers are in use
- A fix to clear all hardware performance monitor events on boot, to
avoid dangling events firmware or previously booted kernels from
triggering spuriously
- A fix to the perf event probing logic to avoid erroneously reporting
the presence of unimplemented counters. This also prevents some
implemented counters from being reported
- A build fix for the vector sigreturn selftest on clang
- A fix to ftrace, which now requires the previously optional index
argument to ftrace_graph_ret_addr()
- A fix to avoid deadlocking if kexec crash handling triggers in an
interrupt context
* tag 'riscv-for-linus-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: kexec: Avoid deadlock in kexec crash path
riscv: stacktrace: fix usage of ftrace_graph_ret_addr()
riscv: selftests: Fix vsetivli args for clang
perf: RISC-V: Check standard event availability
drivers/perf: riscv: Reset the counter to hpmevent mapping while starting cpus
drivers/perf: riscv: Do not update the event data if uptodate
documentation: Fix riscv cmodx example
- xe: migration error handling + typoed register name in gt setup
- i915: usb-c fix to shut up warnings on MTL+
- panthor: fix sync-only jobs + ioctl validation fix to not EINVAL
wrongly
- panel quirks
- nouveau: NULL deref in get_modes
drm core:
- fbdev big endian fix for the dma memory backed variant
drivers/firmware:
- fix sysfb refcounting"
* tag 'drm-fixes-2024-07-05' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/mcr: Avoid clobbering DSS steering
drm/xe: fix error handling in xe_migrate_update_pgtables
drm/ttm: Always take the bo delayed cleanup path for imported bos
drm/fbdev-generic: Fix framebuffer on big endian devices
drm/panthor: Fix sync-only jobs
drm/panthor: Don't check the array stride on empty uobj arrays
drm/amdgpu/atomfirmware: silence UBSAN warning
drm/radeon: check bo_va->bo is non-NULL before using it
drm/amd/display: Fix array-index-out-of-bounds in dml2/FCLKChangeSupport
drm/amd/display: Update efficiency bandwidth for dcn351
drm/amd/display: Fix refresh rate range for some panel
drm/amd/display: Account for cursor prefetch BW in DML1 mode support
drm/amd/display: Add refresh rate range check
drm/amd/display: Reset freesync config before update new state
drm: panel-orientation-quirks: Add labels for both Valve Steam Deck revisions
drm: panel-orientation-quirks: Add quirk for Valve Galileo
drm/i915/display: For MTL+ platforms skip mg dp programming
drm/nouveau: fix null pointer dereference in nouveau_connector_get_modes
firmware: sysfb: Fix reference count of sysfb parent device
Merge tag 'gpio-fixes-for-v6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Two OF lookup quirks and one fix for an issue in the generic gpio-mmio
driver:
- add two OF lookup quirks for TSC2005 and MIPS Lantiq
- don't try to figure out bgpio_bits from the 'ngpios' property in
gpio-mmio"
* tag 'gpio-fixes-for-v6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: of: add polarity quirk for TSC2005
gpio: mmio: do not calculate bgpio_bits via "ngpios"
gpiolib: of: fix lookup quirk for MIPS Lantiq
Merge tag 'tpmdd-next-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull TPM fixes from Jarkko Sakkinen:
"This contains the fixes for !chip->auth condition, preventing the
breakage of:
- tpm_ftpm_tee.c
- tpm_i2c_nuvoton.c
- tpm_ibmvtpm.c
- tpm_tis_i2c_cr50.c
- tpm_vtpm_proxy.c
All drivers will continue to work as they did in 6.9, except a single
warning (dev_warn() not WARN()) is printed to klog only to inform that
authenticated sessions are not enabled"
* tag 'tpmdd-next-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: Address !chip->auth in tpm_buf_append_hmac_session*()
tpm: Address !chip->auth in tpm_buf_append_name()
tpm: Address !chip->auth in tpm2_*_auth_session()
Wolfram Sang [Fri, 5 Jul 2024 14:08:55 +0000 (16:08 +0200)]
Merge tag 'i2c-host-fixes-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
This tag includes a nice fix in the PNX driver that has been
pending for a long time. Piotr has replaced a potential lock in
the interrupt context with a more efficient and straightforward
handling of the timeout signaling.
DTS for Nokia N900 incorrectly specifies "active high" polarity for
the reset line, while the chip documentation actually specifies it as
"active low". In the past the driver fudged gpiod API and inverted
the logic internally, but it was changed in d0d89493bff8.
Jarkko Sakkinen [Wed, 3 Jul 2024 15:47:46 +0000 (18:47 +0300)]
tpm: Address !chip->auth in tpm_buf_append_hmac_session*()
Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can
cause a null derefence in tpm_buf_hmac_session*(). Thus, address
!chip->auth in tpm_buf_hmac_session*() and remove the fallback
implementation for !TCG_TPM2_HMAC.
Cc: stable@vger.kernel.org # v6.9+ Reported-by: Stefan Berger <stefanb@linux.ibm.com> Closes: https://lore.kernel.org/linux-integrity/20240617193408.1234365-1-stefanb@linux.ibm.com/ Fixes: 1085b8276bb4 ("tpm: Add the rest of the session HMAC API") Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppc Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Jarkko Sakkinen [Wed, 3 Jul 2024 15:33:14 +0000 (18:33 +0300)]
tpm: Address !chip->auth in tpm_buf_append_name()
Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can
cause a null derefence in tpm_buf_append_name(). Thus, address
!chip->auth in tpm_buf_append_name() and remove the fallback
implementation for !TCG_TPM2_HMAC.
Cc: stable@vger.kernel.org # v6.10+ Reported-by: Stefan Berger <stefanb@linux.ibm.com> Closes: https://lore.kernel.org/linux-integrity/20240617193408.1234365-1-stefanb@linux.ibm.com/ Fixes: d0a25bb961e6 ("tpm: Add HMAC session name/handle append") Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppc Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Jarkko Sakkinen [Wed, 3 Jul 2024 16:39:27 +0000 (19:39 +0300)]
tpm: Address !chip->auth in tpm2_*_auth_session()
Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can cause
a null derefence in tpm2_*_auth_session(). Thus, address !chip->auth in
tpm2_*_auth_session().
Cc: stable@vger.kernel.org # v6.9+ Reported-by: Stefan Berger <stefanb@linux.ibm.com> Closes: https://lore.kernel.org/linux-integrity/20240617193408.1234365-1-stefanb@linux.ibm.com/ Fixes: 699e3efd6c64 ("tpm: Add HMAC session start and end functions") Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppc Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Merge tag 'for-6.10-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix folio refcounting when releasing them (encoded write, dummy
extent buffer)
- fix out of bounds read when checking qgroup inherit data
- fix how configurable chunk size is handled in zoned mode
- in the ref-verify tool, fix uninitialized return value when checking
extent owner ref and simple quota are not enabled
* tag 'for-6.10-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix folio refcount in __alloc_dummy_extent_buffer()
btrfs: fix folio refcount in btrfs_do_encoded_write()
btrfs: fix uninitialized return value in the ref-verify tool
btrfs: always do the basic checks for btrfs_qgroup_inherit structure
btrfs: zoned: fix calc_available_free_space() for zoned mode
Merge tag 'net-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, wireless and netfilter.
There's one fix for power management with Intel's e1000e here,
Thorsten tells us there's another problem that started in v6.9. We're
trying to wrap that up but I don't think it's blocking.
Current release - new code bugs:
- wifi: mac80211: disable softirqs for queued frame handling
- af_unix: fix uninit-value in __unix_walk_scc(), with the new
garbage collection algo
Previous releases - regressions:
- Bluetooth:
- qca: fix BT enable failure for QCA6390 after warm reboot
- add quirk to ignore reserved PHY bits in LE Extended Adv Report,
abused by some Broadcom controllers found on Apple machines
- wifi: wilc1000: fix ies_len type in connect path
Previous releases - always broken:
- tcp: fix DSACK undo in fast recovery to call tcp_try_to_open(),
avoid premature timeouts
- net: make sure skb_datagram_iter maps fragments page by page, in
case we somehow get compound highmem mixed in
- eth: bnx2x: fix multiple UBSAN array-index-out-of-bounds when more
queues are used
Misc:
- MAINTAINERS: Remembering Larry Finger"
* tag 'net-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
bnxt_en: Fix the resource check condition for RSS contexts
mlxsw: core_linecards: Fix double memory deallocation in case of invalid INI file
inet_diag: Initialize pad field in struct inet_diag_req_v2
tcp: Don't flag tcp_sk(sk)->rx_opt.saw_unknown for TCP AO.
selftests: make order checking verbose in msg_zerocopy selftest
selftests: fix OOM in msg_zerocopy selftest
ice: use proper macro for testing bit
ice: Reject pin requests with unsupported flags
ice: Don't process extts if PTP is disabled
ice: Fix improper extts handling
selftest: af_unix: Add test case for backtrack after finalising SCC.
af_unix: Fix uninit-value in __unix_walk_scc()
bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set()
net: rswitch: Avoid use-after-free in rswitch_poll()
netfilter: nf_tables: unconditionally flush pending work before notifier
wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference
wifi: iwlwifi: mvm: avoid link lookup in statistics
wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL
wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK
wifi: wilc1000: fix ies_len type in connect path
...
Merge tag 's390-6.10-8' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Fix and add physical to virtual address translations in dasd and
virtio_ccw drivers. For virtio_ccw this is just a minimal fix.
More code cleanup will follow.
- Small defconfig updates
* tag 's390-6.10-8' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/dasd: Fix invalid dereferencing of indirect CCW data pointer
s390/vfio_ccw: Fix target addresses of TIC CCWs
s390: Update defconfigs
Merge tag 'mm-hotfixes-stable-2024-07-03-22-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from, Andrew Morton:
"6 hotfies, all cc:stable. Some fixes for longstanding nilfs2 issues
and three unrelated MM fixes"
* tag 'mm-hotfixes-stable-2024-07-03-22-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nilfs2: fix incorrect inode allocation from reserved inodes
nilfs2: add missing check for inode numbers on directory entries
nilfs2: fix inode number range checks
mm: avoid overflows in dirty throttling logic
Revert "mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again"
mm: optimize the redundant loop of mm_update_owner_next()
bnxt_en: Fix the resource check condition for RSS contexts
While creating a new RSS context, bnxt_rfs_capable() currently
makes a strict check to see if the required VNICs are already
available. If the current VNICs are not what is required,
either too many or not enough, it will call the firmware to
reserve the exact number required.
There is a bug in the firmware when the driver tries to
relinquish some reserved VNICs and RSS contexts. It will
cause the default VNIC to lose its RSS configuration and
cause receive packets to be placed incorrectly.
Workaround this problem by skipping the resource reduction.
The driver will not reduce the VNIC and RSS context reservations
when a context is deleted. The resources will be available for
use when new contexts are created later.
Potentially, this workaround can cause us to run out of VNIC
and RSS contexts if there are a lot of VF functions creating
and deleting RSS contexts. In the future, we will conditionally
disable this workaround when the firmware fix is available.
Aleksandr Mishin [Wed, 3 Jul 2024 20:32:51 +0000 (23:32 +0300)]
mlxsw: core_linecards: Fix double memory deallocation in case of invalid INI file
In case of invalid INI file mlxsw_linecard_types_init() deallocates memory
but doesn't reset pointer to NULL and returns 0. In case of any error
occurred after mlxsw_linecard_types_init() call, mlxsw_linecards_init()
calls mlxsw_linecard_types_fini() which performs memory deallocation again.
Add pointer reset to NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b217127e5e4e ("mlxsw: core_linecards: Add line card objects and implement provisioning") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Link: https://patch.msgid.link/20240703203251.8871-1-amishin@t-argos.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 4 Jul 2024 14:31:54 +0000 (07:31 -0700)]
Merge tag 'wireless-2024-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.10
Hopefully the last fixes for v6.10. Fix a regression in wilc1000
where bitrate Information Elements longer than 255 bytes were broken.
Few fixes also to mac80211 and iwlwifi.
* tag 'wireless-2024-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference
wifi: iwlwifi: mvm: avoid link lookup in statistics
wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL
wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK
wifi: wilc1000: fix ies_len type in connect path
wifi: mac80211: fix BSS_CHANGED_UNSOL_BCAST_PROBE_RESP
====================
Paolo Abeni [Thu, 4 Jul 2024 13:31:26 +0000 (15:31 +0200)]
Merge tag 'nf-24-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains a oneliner patch to inconditionally flush
workqueue containing stale objects to be released, syzbot managed to
trigger UaF. Patch from Florian Westphal.
netfilter pull request 24-07-04
* tag 'nf-24-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: unconditionally flush pending work before notifier
====================
Shigeru Yoshida [Wed, 3 Jul 2024 09:16:49 +0000 (18:16 +0900)]
inet_diag: Initialize pad field in struct inet_diag_req_v2
KMSAN reported uninit-value access in raw_lookup() [1]. Diag for raw
sockets uses the pad field in struct inet_diag_req_v2 for the
underlying protocol. This field corresponds to the sdiag_raw_protocol
field in struct inet_diag_req_raw.
inet_diag_get_exact_compat() converts inet_diag_req to
inet_diag_req_v2, but leaves the pad field uninitialized. So the issue
occurs when raw_lookup() accesses the sdiag_raw_protocol field.
Fix this by initializing the pad field in
inet_diag_get_exact_compat(). Also, do the same fix in
inet_diag_dump_compat() to avoid the similar issue in the future.
tcp: Don't flag tcp_sk(sk)->rx_opt.saw_unknown for TCP AO.
When we process segments with TCP AO, we don't check it in
tcp_parse_options(). Thus, opt_rx->saw_unknown is set to 1,
which unconditionally triggers the BPF TCP option parser.
Let's avoid the unnecessary BPF invocation.
Fixes: 0a3a809089eb ("net/tcp: Verify inbound TCP-AO signed segments") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Dmitry Safonov <0x7f454c46@gmail.com> Link: https://patch.msgid.link/20240703033508.6321-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Matt Roper [Wed, 26 Jun 2024 21:05:37 +0000 (14:05 -0700)]
drm/xe/mcr: Avoid clobbering DSS steering
A couple copy/paste mistakes in the code that selects steering targets
for OADDRM and INSTANCE0 unintentionally clobbered the steering target
for DSS ranges in some cases.
The OADDRM/INSTANCE0 values were also not assigned as intended, although
that mistake wound up being harmless since the desired values for those
specific ranges were '0' which the kzalloc of the GT structure should
have already taken care of implicitly.
Matthew Auld [Thu, 20 Jun 2024 10:20:26 +0000 (11:20 +0100)]
drm/xe: fix error handling in xe_migrate_update_pgtables
Don't call drm_suballoc_free with sa_bo pointing to PTR_ERR.
References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2120 Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: <stable@vger.kernel.org> # v6.8+ Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240620102025.127699-2-matthew.auld@intel.com
(cherry picked from commit ce6b63336f79ec5f3996de65f452330e395f99ae) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Thomas Hellström [Fri, 28 Jun 2024 15:38:48 +0000 (17:38 +0200)]
drm/ttm: Always take the bo delayed cleanup path for imported bos
Bos can be put with multiple unrelated dma-resv locks held. But
imported bos attempt to grab the bo dma-resv during dma-buf detach
that typically happens during cleanup. That leads to lockde splats
similar to the below and a potential ABBA deadlock.
Fix this by always taking the delayed workqueue cleanup path for
imported bos.
Requesting stable fixes from when the Xe driver was introduced,
since its usage of drm_exec and wide vm dma_resvs appear to be
the first reliable trigger of this.
[22982.116427] ============================================
[22982.116428] WARNING: possible recursive locking detected
[22982.116429] 6.10.0-rc2+ #10 Tainted: G U W
[22982.116430] --------------------------------------------
[22982.116430] glxgears:sh0/5785 is trying to acquire lock:
[22982.116431] ffff8c2bafa539a8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: dma_buf_detach+0x3b/0xf0
[22982.116438]
but task is already holding lock:
[22982.116438] ffff8c2d9aba6da8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x49/0x2b0 [drm_exec]
[22982.116442]
other info that might help us debug this:
[22982.116442] Possible unsafe locking scenario:
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: Christian König <christian.koenig@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: intel-xe@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v6.8+ Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240628153848.4989-1-thomas.hellstrom@linux.intel.com
====================
fix OOM and order check in msg_zerocopy selftest
In selftests/net/msg_zerocopy.c, it has a while loop keeps calling sendmsg
on a socket with MSG_ZEROCOPY flag, and it will recv the notifications
until the socket is not writable. Typically, it will start the receiving
process after around 30+ sendmsgs. However, as the introduction of commit dfa2f0483360 ("tcp: get rid of sysctl_tcp_adv_win_scale"), the sender is
always writable and does not get any chance to run recv notifications.
The selftest always exits with OUT_OF_MEMORY because the memory used by
opt_skb exceeds the net.core.optmem_max. Meanwhile, it could be set to a
different value to trigger OOM on older kernels too.
Thus, we introduce "cfg_notification_limit" to force sender to receive
notifications after some number of sendmsgs.
And, we find that when lock debugging is on, notifications may not come in
order. Thus, we have order checking outputs managed by cfg_verbose, to
avoid too many outputs in this case.
====================
selftests: make order checking verbose in msg_zerocopy selftest
We find that when lock debugging is on, notifications may not come in
order. Thus, we have order checking outputs managed by cfg_verbose, to
avoid too many outputs in this case.
Fixes: 07b65c5b31ce ("test: add msg_zerocopy test") Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com> Signed-off-by: Xiaochun Lu <xiaochun.lu@bytedance.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240701225349.3395580-3-zijianzhang@bytedance.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In selftests/net/msg_zerocopy.c, it has a while loop keeps calling sendmsg
on a socket with MSG_ZEROCOPY flag, and it will recv the notifications
until the socket is not writable. Typically, it will start the receiving
process after around 30+ sendmsgs. However, as the introduction of commit dfa2f0483360 ("tcp: get rid of sysctl_tcp_adv_win_scale"), the sender is
always writable and does not get any chance to run recv notifications.
The selftest always exits with OUT_OF_MEMORY because the memory used by
opt_skb exceeds the net.core.optmem_max. Meanwhile, it could be set to a
different value to trigger OOM on older kernels too.
Thus, we introduce "cfg_notification_limit" to force sender to receive
notifications after some number of sendmsgs.
Fixes: 07b65c5b31ce ("test: add msg_zerocopy test") Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com> Signed-off-by: Xiaochun Lu <xiaochun.lu@bytedance.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240701225349.3395580-2-zijianzhang@bytedance.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Intel Wired LAN Driver Updates 2024-06-25 (ice)
This series contains updates to ice driver only.
Milena adds disabling of extts events when PTP is disabled.
Jake prevents possible NULL pointer by checking that timestamps are
ready before processing extts events and adds checks for unsupported
PTP pin configuration.
Petr Oros replaces _test_bit() with the correct test_bit() macro.
v1: https://lore.kernel.org/netdev/20240625170248.199162-1-anthony.l.nguyen@intel.com/
====================
Petr Oros [Tue, 2 Jul 2024 17:14:57 +0000 (10:14 -0700)]
ice: use proper macro for testing bit
Do not use _test_bit() macro for testing bit. The proper macro for this
is one without underline.
_test_bit() is what test_bit() was prior to const-optimization. It
directly calls arch_test_bit(), i.e. the arch-specific implementation
(or the generic one). It's strictly _internal_ and shouldn't be used
anywhere outside the actual test_bit() macro.
test_bit() is a wrapper which checks whether the bitmap and the bit
number are compile-time constants and if so, it calls the optimized
function which evaluates this call to a compile-time constant as well.
If either of them is not a compile-time constant, it just calls _test_bit().
test_bit() is the actual function to use anywhere in the kernel.
The sensors is not a compile-time constant, thus most probably there
are no object code changes before and after the patch.
But anyway, we shouldn't call internal wrappers instead of
the actual API.
Fixes: 4da71a77fc3b ("ice: read internal temperature sensor") Acked-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240702171459.2606611-5-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jacob Keller [Tue, 2 Jul 2024 17:14:56 +0000 (10:14 -0700)]
ice: Reject pin requests with unsupported flags
The driver receives requests for configuring pins via the .enable
callback of the PTP clock object. These requests come into the driver
with flags which modify the requested behavior from userspace. Current
implementation in ice does not reject flags that it doesn't support.
This causes the driver to incorrectly apply requests with such flags as
PTP_PEROUT_DUTY_CYCLE, or any future flags added by the kernel which it
is not yet aware of.
Fix this by properly validating flags in both ice_ptp_cfg_perout and
ice_ptp_cfg_extts. Ensure that we check by bit-wise negating supported
flags rather than just checking and rejecting known un-supported flags.
This is preferable, as it ensures better compatibility with future
kernels.
Fixes: 172db5f91d5f ("ice: add support for auxiliary input/output pins") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240702171459.2606611-4-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jacob Keller [Tue, 2 Jul 2024 17:14:55 +0000 (10:14 -0700)]
ice: Don't process extts if PTP is disabled
The ice_ptp_extts_event() function can race with ice_ptp_release() and
result in a NULL pointer dereference which leads to a kernel panic.
Panic occurs because the ice_ptp_extts_event() function calls
ptp_clock_event() with a NULL pointer. The ice driver has already
released the PTP clock by the time the interrupt for the next external
timestamp event occurs.
To fix this, modify the ice_ptp_extts_event() function to check the
PTP state and bail early if PTP is not ready.
Fixes: 172db5f91d5f ("ice: add support for auxiliary input/output pins") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240702171459.2606611-3-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extts events are disabled and enabled by the application ts2phc.
However, in case where the driver is removed when the application is
running, a specific extts event remains enabled and can cause a kernel
crash.
As a side effect, when the driver is reloaded and application is started
again, remaining extts event for the channel from a previous run will
keep firing and the message "extts on unexpected channel" might be
printed to the user.
To avoid that, extts events shall be disabled when PTP is released.
Fixes: 172db5f91d5f ("ice: add support for auxiliary input/output pins") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Co-developed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Milena Olech <milena.olech@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240702171459.2606611-2-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shigeru Yoshida [Tue, 2 Jul 2024 16:04:27 +0000 (01:04 +0900)]
af_unix: Fix uninit-value in __unix_walk_scc()
KMSAN reported uninit-value access in __unix_walk_scc() [1].
In the list_for_each_entry_reverse() loop, when the vertex's index
equals it's scc_index, the loop uses the variable vertex as a
temporary variable that points to a vertex in scc. And when the loop
is finished, the variable vertex points to the list head, in this case
scc, which is a local variable on the stack (more precisely, it's not
even scc and might underflow the call stack of __unix_walk_scc():
container_of(&scc, struct unix_vertex, scc_entry)).
However, the variable vertex is used under the label prev_vertex. So
if the edge_stack is not empty and the function jumps to the
prev_vertex label, the function will access invalid data on the
stack. This causes the uninit-value access issue.
Fix this by introducing a new temporary variable for the loop.
Sam Sun [Tue, 2 Jul 2024 13:55:55 +0000 (14:55 +0100)]
bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set()
In function bond_option_arp_ip_targets_set(), if newval->string is an
empty string, newval->string+1 will point to the byte after the
string, causing an out-of-bound read.
Fix it by adding a check of string length before using it.
Fixes: f9de11a16594 ("bonding: add ip checks when store ip target") Signed-off-by: Yue Sun <samsun1006219@gmail.com> Signed-off-by: Simon Horman <horms@kernel.org> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20240702-bond-oob-v6-1-2dfdba195c19@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Radu Rendec [Tue, 2 Jul 2024 21:08:37 +0000 (17:08 -0400)]
net: rswitch: Avoid use-after-free in rswitch_poll()
The use-after-free is actually in rswitch_tx_free(), which is inlined in
rswitch_poll(). Since `skb` and `gq->skbs[gq->dirty]` are in fact the
same pointer, the skb is first freed using dev_kfree_skb_any(), then the
value in skb->len is used to update the interface statistics.
Let's move around the instructions to use skb->len before the skb is
freed.
This bug is trivial to reproduce using KFENCE. It will trigger a splat
every few packets. A simple ARP request or ICMP echo request is enough.
Fixes: 271e015b9153 ("net: rswitch: Add unmap_addrs instead of dma address in each desc") Signed-off-by: Radu Rendec <rrendec@redhat.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://patch.msgid.link/20240702210838.2703228-1-rrendec@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Boris Burkov [Tue, 2 Jul 2024 14:31:14 +0000 (07:31 -0700)]
btrfs: fix folio refcount in __alloc_dummy_extent_buffer()
Another improper use of __folio_put() in an error path after freshly
allocating pages/folios which returns them with the refcount initialized
to 1. The refactor from __free_pages() -> __folio_put() (instead of
folio_put) removed a refcount decrement found in __free_pages() and
folio_put but absent from __folio_put().
Fixes: 13df3775efca ("btrfs: cleanup metadata page pointer usage") CC: stable@vger.kernel.org # 6.8+ Tested-by: Ed Tomlinson <edtoml@gmail.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Boris Burkov [Tue, 2 Jul 2024 14:31:13 +0000 (07:31 -0700)]
btrfs: fix folio refcount in btrfs_do_encoded_write()
The conversion to folios switched __free_page() to __folio_put() in the
error path in btrfs_do_encoded_write().
However, this gets the page refcounting wrong. If we do hit that error
path (I reproduced by modifying btrfs_do_encoded_write to pretend to
always fail in a way that jumps to out_folios and running the fstests
case btrfs/281), then we always hit the following BUG freeing the folio:
BUG: Bad page state in process btrfs pfn:40ab0b
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x61be5 pfn:0x40ab0b
flags: 0x5ffff0000000000(node=0|zone=2|lastcpupid=0x1ffff)
raw: 05ffff00000000000000000000000000dead0000000001220000000000000000
raw: 0000000000061be5000000000000000000000001ffffffff0000000000000000
page dumped because: nonzero _refcount
Call Trace:
<TASK>
dump_stack_lvl+0x3d/0xe0
bad_page+0xea/0xf0
free_unref_page+0x8e1/0x900
? __mem_cgroup_uncharge+0x69/0x90
__folio_put+0xe6/0x190
btrfs_do_encoded_write+0x445/0x780
? current_time+0x25/0xd0
btrfs_do_write_iter+0x2cc/0x4b0
btrfs_ioctl_encoded_write+0x2b6/0x340
It turns out __free_page() decreases the page reference count while
__folio_put() does not. Switch __folio_put() to folio_put() which
decreases the folio reference count first.
Fixes: 400b172b8cdc ("btrfs: compression: migrate compression/decompression paths to folios") Tested-by: Ed Tomlinson <edtoml@gmail.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
netfilter: nf_tables: unconditionally flush pending work before notifier
syzbot reports:
KASAN: slab-uaf in nft_ctx_update include/net/netfilter/nf_tables.h:1831
KASAN: slab-uaf in nft_commit_release net/netfilter/nf_tables_api.c:9530
KASAN: slab-uaf int nf_tables_trans_destroy_work+0x152b/0x1750 net/netfilter/nf_tables_api.c:9597
Read of size 2 at addr ffff88802b0051c4 by task kworker/1:1/45
[..]
Workqueue: events nf_tables_trans_destroy_work
Call Trace:
nft_ctx_update include/net/netfilter/nf_tables.h:1831 [inline]
nft_commit_release net/netfilter/nf_tables_api.c:9530 [inline]
nf_tables_trans_destroy_work+0x152b/0x1750 net/netfilter/nf_tables_api.c:9597
Problem is that the notifier does a conditional flush, but its possible
that the table-to-be-removed is still referenced by transactions being
processed by the worker, so we need to flush unconditionally.
We could make the flush_work depend on whether we found a table to delete
in nf-next to avoid the flush for most cases.
AFAICS this problem is only exposed in nf-next, with
commit e169285f8c56 ("netfilter: nf_tables: do not store nft_ctx in transaction objects"),
with this commit applied there is an unconditional fetch of
table->family which is whats triggering the above splat.
Fixes: 2c9f0293280e ("netfilter: nf_tables: flush pending destroy work before netlink notifier") Reported-and-tested-by: syzbot+4fd66a69358fc15ae2ad@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=4fd66a69358fc15ae2ad Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Piotr Wojtaszczyk [Fri, 28 Jun 2024 15:25:42 +0000 (17:25 +0200)]
i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr
When del_timer_sync() is called in an interrupt context it throws a warning
because of potential deadlock. The timer is used only to exit from
wait_for_completion() after a timeout so replacing the call with
wait_for_completion_timeout() allows to remove the problematic timer and
its related functions altogether.
Fixes: 41561f28e76a ("i2c: New Philips PNX bus driver") Signed-off-by: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Since this ioctl hasn't been in a full release yet, change it from
"T", 0x1 to "R" 0x20, and also reserve 0x20-0x2F for future ioctl
commands, as some more are being worked on for the future"
* tag 'trace-v6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Have memmapped ring buffer use ioctl of "R" range 0x20-2F
tracing: Have memmapped ring buffer use ioctl of "R" range 0x20-2F
To prevent conflicts with other ioctl numbers to allow strace to have an
idea of what is happening, add the range of ioctls for the trace buffer
mapping from _IO("T", 0x1) to the range of "R" 0x20 - 0x2F.
Song Shuai [Wed, 26 Jun 2024 02:33:16 +0000 (10:33 +0800)]
riscv: kexec: Avoid deadlock in kexec crash path
If the kexec crash code is called in the interrupt context, the
machine_kexec_mask_interrupts() function will trigger a deadlock while
trying to acquire the irqdesc spinlock and then deactivate irqchip in
irq_set_irqchip_state() function.
Unlike arm64, riscv only requires irq_eoi handler to complete EOI and
keeping irq_set_irqchip_state() will only leave this possible deadlock
without any use. So we simply remove it.
Puranjay Mohan [Tue, 18 Jun 2024 14:58:20 +0000 (14:58 +0000)]
riscv: stacktrace: fix usage of ftrace_graph_ret_addr()
ftrace_graph_ret_addr() takes an `idx` integer pointer that is used to
optimize the stack unwinding. Pass it a valid pointer to utilize the
optimizations that might be available in the future.
The commit is making riscv's usage of ftrace_graph_ret_addr() match
x86_64.
Merge patch series "Assorted fixes in RISC-V PMU driver"
Atish Patra <atishp@rivosinc.com> says:
This series contains 3 fixes out of which the first one is a new fix
for invalid event data reported in lkml[2]. The last two are v3 of Samuel's
patch[1]. I added the RB/TB/Fixes tag and moved 1 unrelated change
to its own patch. I also changed an error message in kvm vcpu_pmu from
pr_err to pr_debug to avoid redundant failure error messages generated
due to the boot time quering of events implemented in the patch[1]
Here is the original cover letter for the patch[1]
Before this patch:
$ perf list hw
List of pre-defined events (to be used in -e or -M):
branch-instructions OR branches [Hardware event]
branch-misses [Hardware event]
bus-cycles [Hardware event]
cache-misses [Hardware event]
cache-references [Hardware event]
cpu-cycles OR cycles [Hardware event]
instructions [Hardware event]
ref-cycles [Hardware event]
stalled-cycles-backend OR idle-cycles-backend [Hardware event]
stalled-cycles-frontend OR idle-cycles-frontend [Hardware event]
* b4-shazam-merge:
perf: RISC-V: Check standard event availability
drivers/perf: riscv: Reset the counter to hpmevent mapping while starting cpus
drivers/perf: riscv: Do not update the event data if uptodate
Samuel Holland [Fri, 28 Jun 2024 07:51:43 +0000 (00:51 -0700)]
perf: RISC-V: Check standard event availability
The RISC-V SBI PMU specification defines several standard hardware and
cache events. Currently, all of these events are exposed to userspace,
even when not actually implemented. They appear in the `perf list`
output, and commands like `perf stat` try to use them.
This is more than just a cosmetic issue, because the PMU driver's .add
function fails for these events, which causes pmu_groups_sched_in() to
prematurely stop scheduling in other (possibly valid) hardware events.
Add logic to check which events are supported by the hardware (i.e. can
be mapped to some counter), so only usable events are reported to
userspace. Since the kernel does not know the mapping between events and
possible counters, this check must happen during boot, when no counters
are in use. Make the check asynchronous to minimize impact on boot time.
Fixes: e9991434596f ("RISC-V: Add perf platform driver based on SBI PMU extension") Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Tested-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20240628-misc_perf_fixes-v4-3-e01cfddcf035@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
projects / users / dwmw2 / linux.git / log