Huazhong Tan [Mon, 16 Nov 2020 08:20:54 +0000 (16:20 +0800)]
net: hns3: rename gl_adapt_enable in struct hns3_enet_coalesce
Besides GL(Gap Limiting), QL(Quantity Limiting) can be modified
dynamically when DIM is supported. So rename gl_adapt_enable as
adapt_enable in struct hns3_enet_coalesce.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Huazhong Tan [Mon, 16 Nov 2020 08:20:51 +0000 (16:20 +0800)]
net: hns3: add support for configuring interrupt quantity limiting
QL(quantity limiting) means that hardware supports the interrupt
coalesce based on the frame quantity. QL can be configured when
int_ql_max in device's specification is non-zero, so add support
to configure it. Also, rename two coalesce init function to fit
their purpose.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
net: phy: add support for shared interrupts (part 2)
This patch set aims to actually add support for shared interrupts in
phylib and not only for multi-PHY devices. While we are at it,
streamline the interrupt handling in phylib.
For a bit of context, at the moment, there are multiple phy_driver ops
that deal with this subject:
- .config_intr() - Enable/disable the interrupt line.
- .ack_interrupt() - Should quiesce any interrupts that may have been
fired. It's also used by phylib in conjunction with .config_intr() to
clear any pending interrupts after the line was disabled, and before
it is going to be enabled.
- .did_interrupt() - Intended for multi-PHY devices with a shared IRQ
line and used by phylib to discern which PHY from the package was the
one that actually fired the interrupt.
- .handle_interrupt() - Completely overrides the default interrupt
handling logic from phylib. The PHY driver is responsible for checking
if any interrupt was fired by the respective PHY and choose
accordingly if it's the one that should trigger the link state machine.
From my point of view, the interrupt handling in phylib has become
somewhat confusing with all these callbacks that actually read the same
PHY register - the interrupt status. A more streamlined approach would
be to just move the responsibility to write an interrupt handler to the
driver (as any other device driver does) and make .handle_interrupt()
the only way to deal with interrupts.
Another advantage with this approach would be that phylib would gain
support for shared IRQs between different PHY (not just multi-PHY
devices), something which at the moment would require extending every
PHY driver anyway in order to implement their .did_interrupt() callback
and duplicate the same logic as in .ack_interrupt(). The disadvantage
of making .did_interrupt() mandatory would be that we are slightly
changing the semantics of the phylib API and that would increase
confusion instead of reducing it.
What I am proposing is the following:
- As a first step, make the .ack_interrupt() callback optional so that
we do not break any PHY driver amid the transition.
- Every PHY driver gains a .handle_interrupt() implementation that, for
the most part, would look like below:
- Remove each PHY driver's implementation of the .ack_interrupt() by
actually taking care of quiescing any pending interrupts before
enabling/after disabling the interrupt line.
- Finally, after all drivers have been ported, remove the
.ack_interrupt() and .did_interrupt() callbacks from phy_driver.
This patch set is part 2 of the entire change set and it addresses the
changes needed in 9 PHY drivers. The rest can be found on my Github
branch here:
https://github.com/IoanaCiornei/linux/commits/phylib-shared-irq
====================
Ioana Ciornei [Fri, 13 Nov 2020 16:52:26 +0000 (18:52 +0200)]
net: phy: adin: remove the use of the .ack_interrupt()
In preparation of removing the .ack_interrupt() callback, we must replace
its occurrences (aka phy_clear_interrupt), from the 2 places where it is
called from (phy_enable_interrupts and phy_disable_interrupts), with
equivalent functionality.
This means that clearing interrupts now becomes something that the PHY
driver is responsible of doing, before enabling interrupts and after
clearing them. Make this driver follow the new contract.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In an attempt to actually support shared IRQs in phylib, we now move the
responsibility of triggering the phylib state machine or just returning
IRQ_NONE, based on the IRQ status register, to the PHY driver. Having
3 different IRQ handling callbacks (.handle_interrupt(),
.did_interrupt() and .ack_interrupt() ) is confusing so let the PHY
driver implement directly an IRQ handler like any other device driver.
Make this driver follow the new convention.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ioana Ciornei [Fri, 13 Nov 2020 16:52:24 +0000 (18:52 +0200)]
net: phy: ste10Xp: remove the use of .ack_interrupt()
In preparation of removing the .ack_interrupt() callback, we must replace
its occurrences (aka phy_clear_interrupt), from the 2 places where it is
called from (phy_enable_interrupts and phy_disable_interrupts), with
equivalent functionality.
This means that clearing interrupts now becomes something that the PHY
driver is responsible of doing, before enabling interrupts and after
clearing them. Make this driver follow the new contract.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In an attempt to actually support shared IRQs in phylib, we now move the
responsibility of triggering the phylib state machine or just returning
IRQ_NONE, based on the IRQ status register, to the PHY driver. Having
3 different IRQ handling callbacks (.handle_interrupt(),
.did_interrupt() and .ack_interrupt() ) is confusing so let the PHY
driver implement directly an IRQ handler like any other device driver.
Make this driver follow the new convention.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ioana Ciornei [Fri, 13 Nov 2020 16:52:22 +0000 (18:52 +0200)]
net: phy: smsc: remove the use of .ack_interrupt()
In preparation of removing the .ack_interrupt() callback, we must replace
its occurrences (aka phy_clear_interrupt), from the 2 places where it is
called from (phy_enable_interrupts and phy_disable_interrupts), with
equivalent functionality.
This means that clearing interrupts now becomes something that the PHY
driver is responsible of doing, before enabling interrupts and after
clearing them. Make this driver follow the new contract.
Cc: Andre Edich <andre.edich@microchip.com> Cc: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In an attempt to actually support shared IRQs in phylib, we now move the
responsibility of triggering the phylib state machine or just returning
IRQ_NONE, based on the IRQ status register, to the PHY driver. Having
3 different IRQ handling callbacks (.handle_interrupt(),
.did_interrupt() and .ack_interrupt() ) is confusing so let the PHY
driver implement directly an IRQ handler like any other device driver.
Make this driver follow the new convention.
Cc: Andre Edich <andre.edich@microchip.com> Cc: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ioana Ciornei [Fri, 13 Nov 2020 16:52:20 +0000 (18:52 +0200)]
net: phy: amd: remove the use of .ack_interrupt()
In preparation of removing the .ack_interrupt() callback, we must replace
its occurrences (aka phy_clear_interrupt), from the 2 places where it is
called from (phy_enable_interrupts and phy_disable_interrupts), with
equivalent functionality.
This means that clearing interrupts now becomes something that the PHY
driver is responsible of doing, before enabling interrupts and after
clearing them. Make this driver follow the new contract.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In an attempt to actually support shared IRQs in phylib, we now move the
responsibility of triggering the phylib state machine or just returning
IRQ_NONE, based on the IRQ status register, to the PHY driver. Having
3 different IRQ handling callbacks (.handle_interrupt(),
.did_interrupt() and .ack_interrupt() ) is confusing so let the PHY
driver implement directly an IRQ handler like any other device driver.
Make this driver follow the new convention.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ioana Ciornei [Fri, 13 Nov 2020 16:52:18 +0000 (18:52 +0200)]
net: phy: nxp-tja11xx: remove the use of .ack_interrupt()
In preparation of removing the .ack_interrupt() callback, we must replace
its occurrences (aka phy_clear_interrupt), from the 2 places where it is
called from (phy_enable_interrupts and phy_disable_interrupts), with
equivalent functionality.
This means that clearing interrupts now becomes something that the PHY
driver is responsible of doing, before enabling interrupts and after
clearing them. Make this driver follow the new contract.
Cc: Marek Vasut <marex@denx.de> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In an attempt to actually support shared IRQs in phylib, we now move the
responsibility of triggering the phylib state machine or just returning
IRQ_NONE, based on the IRQ status register, to the PHY driver. Having
3 different IRQ handling callbacks (.handle_interrupt(),
.did_interrupt() and .ack_interrupt() ) is confusing so let the PHY
driver implement directly an IRQ handler like any other device driver.
Make this driver follow the new convention.
Cc: Marek Vasut <marex@denx.de> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ioana Ciornei [Fri, 13 Nov 2020 16:52:16 +0000 (18:52 +0200)]
net: phy: lxt: remove the use of .ack_interrupt()
In preparation of removing the .ack_interrupt() callback, we must replace
its occurrences (aka phy_clear_interrupt), from the 2 places where it is
called from (phy_enable_interrupts and phy_disable_interrupts), with
equivalent functionality.
This means that clearing interrupts now becomes something that the PHY
driver is responsible of doing, before enabling interrupts and after
clearing them. Make this driver follow the new contract.
In an attempt to actually support shared IRQs in phylib, we now move the
responsibility of triggering the phylib state machine or just returning
IRQ_NONE, based on the IRQ status register, to the PHY driver. Having
3 different IRQ handling callbacks (.handle_interrupt(),
.did_interrupt() and .ack_interrupt() ) is confusing so let the PHY
driver implement directly an IRQ handler like any other device driver.
Make this driver follow the new convention.
Ioana Ciornei [Fri, 13 Nov 2020 16:52:14 +0000 (18:52 +0200)]
net: phy: marvell: remove the use of .ack_interrupt()
In preparation of removing the .ack_interrupt() callback, we must replace
its occurrences (aka phy_clear_interrupt), from the 2 places where it is
called from (phy_enable_interrupts and phy_disable_interrupts), with
equivalent functionality.
This means that clearing interrupts now becomes something that the PHY
driver is responsible of doing, before enabling interrupts and after
clearing them. Make this driver follow the new contract.
Cc: Maxim Kochetkov <fido_max@inbox.ru> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Robert Hancock <robert.hancock@calian.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In an attempt to actually support shared IRQs in phylib, we now move the
responsibility of triggering the phylib state machine or just returning
IRQ_NONE, based on the IRQ status register, to the PHY driver. Having
3 different IRQ handling callbacks (.handle_interrupt(),
.did_interrupt() and .ack_interrupt() ) is confusing so let the PHY
driver implement directly an IRQ handler like any other device driver.
Make this driver follow the new convention.
Cc: Maxim Kochetkov <fido_max@inbox.ru> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Robert Hancock <robert.hancock@calian.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ioana Ciornei [Fri, 13 Nov 2020 16:52:12 +0000 (18:52 +0200)]
net: phy: microchip: remove the use of .ack_interrupt()
In preparation of removing the .ack_interrupt() callback, we must replace
its occurrences (aka phy_clear_interrupt), from the 2 places where it is
called from (phy_enable_interrupts and phy_disable_interrupts), with
equivalent functionality.
This means that clearing interrupts now becomes something that the PHY
driver is responsible of doing, before enabling interrupts and after
clearing them. Make this driver follow the new contract.
In an attempt to actually support shared IRQs in phylib, we now move the
responsibility of triggering the phylib state machine or just returning
IRQ_NONE, based on the IRQ status register, to the PHY driver. Having
3 different IRQ handling callbacks (.handle_interrupt(),
.did_interrupt() and .ack_interrupt() ) is confusing so let the PHY
driver implement directly an IRQ handler like any other device driver.
Make this driver follow the new convention.
Ioana Ciornei [Fri, 13 Nov 2020 16:52:10 +0000 (18:52 +0200)]
net: phy: vitesse: remove the use of .ack_interrupt()
In preparation of removing the .ack_interrupt() callback, we must replace
its occurrences (aka phy_clear_interrupt), from the 2 places where it is
called from (phy_enable_interrupts and phy_disable_interrupts), with
equivalent functionality.
This means that clearing interrupts now becomes something that the PHY
driver is responsible of doing, before enabling interrupts and after
clearing them. Make this driver follow the new contract.
In an attempt to actually support shared IRQs in phylib, we now move the
responsibility of triggering the phylib state machine or just returning
IRQ_NONE, based on the IRQ status register, to the PHY driver. Having
3 different IRQ handling callbacks (.handle_interrupt(),
.did_interrupt() and .ack_interrupt() ) is confusing so let the PHY
driver implement directly an IRQ handler like any other device driver.
Make this driver follow the new convention.
The previous Kconfig patch led to some other build errors as
reported by the 0day bot and my own overnight build testing.
These are all in <linux/skbuff.h> when KCOV is enabled but
SKB_EXTENSIONS is not enabled, so fix those by combining those conditions
in the header file.
Fixes: 6370cc3bbd8a ("net: add kcov handle to skb extensions") Fixes: 85ce50d337d1 ("net: kcov: don't select SKB_EXTENSIONS when there is no NET") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Aleksandr Nogikh <nogikh@google.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20201116212108.32465-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sven Van Asbroeck [Mon, 16 Nov 2020 17:01:55 +0000 (12:01 -0500)]
lan743x: replace devicetree phy parse code with library function
The code in this driver which parses the devicetree to determine
the phy/fixed link setup, can be replaced by a single library
function: of_phy_get_and_connect().
Behaviour is identical, except that the library function will
complain when 'phy-connection-type' is omitted, instead of
blindly using PHY_INTERFACE_MODE_NA, which would result in an
invalid phy configuration.
The library function no longer brings out the exact phy_mode,
but the driver doesn't need this, because phy_interface_is_rgmii()
queries the phydev directly. Remove 'phy_mode' from the private
adapter struct.
While we're here, log info about the attached phy on connect,
this is useful because the phy type and connection method is now
fully configurable via the devicetree.
Tested on a lan7430 chip with built-in phy. Verified that adding
fixed-link/phy-connection-type in the devicetree results in a
fixed-link setup. Used ethtool to verify that the devicetree
settings are used.
Tested-by: Sven Van Asbroeck <thesven73@gmail.com> # lan7430 Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201116170155.26967-1-TheSven73@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit [Sun, 15 Nov 2020 15:03:10 +0000 (16:03 +0100)]
net: phy: don't duplicate driver name in phy_attached_print
Currently we print the driver name twice in phy_attached_print():
- phy_dev_info() prints it as part of the device info
- and we print it as part of the info string
This is a little bit ugly, it makes the info harder to read,
especially if the driver name is a little bit longer.
Therefore omit the driver name (if set) in the info string.
Heiner Kallweit [Mon, 16 Nov 2020 16:03:14 +0000 (17:03 +0100)]
r8169: remove nr_frags argument from rtl_tx_slots_avail
The only time when nr_frags isn't SKB_MAX_FRAGS is when entering
rtl8169_start_xmit(). However we can use SKB_MAX_FRAGS also here
because when queue isn't stopped there should always be room for
MAX_SKB_FRAGS + 1 descriptors.
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Julia Lawall <julia.lawall@inria.fr> Reviewed-by: Antoine Tenart <atenart@kernel.org> Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2011161633240.2682@hadrien Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
net: dsa: tag_dsa: Unify regular and ethertype DSA taggers
The first patch ports tag_edsa.c's handling of IGMP/MLD traps to
tag_dsa.c. That way, we start from two logically equivalent taggers
that are then merged. The second commit does the heavy lifting of
actually fusing tag_dsa.c and tag_edsa.c. The final one just follows
up with some clean up of existing comments.
v2 -> v3:
- Add the first patch described above as suggested by Andrew.
- Better documentation of TO_SNIFFER and FORWARD tags.
- Spelling.
v1 -> v2:
- Fixed some grammar and whitespace errors.
- Removed unnecessary default value in Kconfig.
- Removed unnecessary #ifdef.
- Split out comment fixes from functional changes.
- Fully document enum dsa_code.
====================
Tobias Waldekranz [Sat, 14 Nov 2020 23:45:57 +0000 (00:45 +0100)]
net: dsa: tag_dsa: Unify regular and ethertype DSA taggers
Ethertype DSA encodes exactly the same information in the DSA tag as
the non-ethertype variety. So refactor out the common parts and reuse
them for both protocols.
This is ensures tag parsing and generation is always consistent across
all mv88e6xxx chips.
While we are at it, explicitly deal with all possible CPU codes on
receive, making sure to set offload_fwd_mark as appropriate.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tobias Waldekranz [Sat, 14 Nov 2020 23:45:56 +0000 (00:45 +0100)]
net: dsa: tag_dsa: Allow forwarding of redirected IGMP traffic
When receiving an IGMP/MLD frame with a TO_CPU tag, the switch has not
performed any forwarding of it. This means that we should not set the
offload_fwd_mark on the skb, in case a software bridge wants it
forwarded.
This is a port of:
1ed9ec9b08ad ("dsa: Allow forwarding of redirected IGMP traffic")
Which corrected the issue for chips using EDSA tags, but not for those
using regular DSA tags.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
mptcp: improve multiple xmit streams support
This series improves MPTCP handling of multiple concurrent
xmit streams.
The to-be-transmitted data is enqueued to a subflow only when
the send window is open, keeping the subflows xmit queue shorter
and allowing for faster switch-over.
The above requires a more accurate msk socket state tracking
and some additional infrastructure to allow pushing the data
pending in the msk xmit queue as soon as the MPTCP's send window
opens (patches 6-10).
As a side effect, the MPTCP socket could enqueue data to subflows
after close() time - to completely spooling the data sitting in the
msk xmit queue. Dealing with the requires some infrastructure and
core TCP changes (patches 1-5)
Finally, patches 11-12 introduce a more accurate tracking of the other
end's receive window.
Overall this refactor the MPTCP xmit path, without introducing
new features - the new code is covered by the existing self-tests.
v2 -> v3:
- rebased,
- fixed checkpatch issue in patch 1/13
- fixed some state tracking issues in patch 8/13
v1 -> v2:
- this is just a repost, to cope with patchwork issues, no changes
at all
====================
Paolo Abeni [Mon, 16 Nov 2020 09:48:14 +0000 (10:48 +0100)]
mptcp: send explicit ack on delayed ack_seq incr
When the worker moves some bytes from the OoO queue into
the receive queue, the msk->ask_seq is updated, the MPTCP-level
ack carrying that value needs to wait the next ingress packet,
possibly slowing down or hanging the peer
Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Westphal [Mon, 16 Nov 2020 09:48:13 +0000 (10:48 +0100)]
mptcp: keep track of advertised windows right edge
Before sending 'x' new bytes also check that the new snd_una would
be within the permitted receive window.
For every ACK that also contains a DSS ack, check whether its tcp-level
receive window would advance the current mptcp window right edge and
update it if so.
Signed-off-by: Florian Westphal <fw@strlen.de> Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Westphal [Mon, 16 Nov 2020 09:48:12 +0000 (10:48 +0100)]
mptcp: rework poll+nospace handling
MPTCP maintains a status bit, MPTCP_SEND_SPACE, that is set when at
least one subflow and the mptcp socket itself are writeable.
mptcp_poll returns EPOLLOUT if the bit is set.
mptcp_sendmsg makes sure MPTCP_SEND_SPACE gets cleared when last write
has used up all subflows or the mptcp socket wmem.
This reworks nospace handling as follows:
MPTCP_SEND_SPACE is replaced with MPTCP_NOSPACE, i.e. inverted meaning.
This bit is set when the mptcp socket is not writeable.
The mptcp-level ack path schedule will then schedule the mptcp worker
to allow it to free already-acked data (and reduce wmem usage).
This will then wake userspace processes that wait for a POLLOUT event.
sendmsg will set MPTCP_NOSPACE only when it has to wait for more
wmem (blocking I/O case).
poll path will set MPTCP_NOSPACE in case the mptcp socket is
not writeable.
Normal tcp-level notification (SOCK_NOSPACE) is only enabled
in case the subflow socket has no available wmem.
Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Mon, 16 Nov 2020 09:48:10 +0000 (10:48 +0100)]
mptcp: move page frag allocation in mptcp_sendmsg()
mptcp_sendmsg() is refactored so that first it copies
the data provided from user space into the send queue,
and then tries to spool the send queue via sendmsg_frag.
There a subtle change in the mptcp level collapsing on
consecutive data fragment: we now allow that only on unsent
data.
The latter don't need to deal with msghdr data anymore
and can be simplified in a relevant way.
snd_nxt and write_seq are now tracked independently.
Overall this allows some relevant cleanup and will
allow sending pending mptcp data on msk una update in
later patch.
Co-developed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Mon, 16 Nov 2020 09:48:09 +0000 (10:48 +0100)]
mptcp: refactor shutdown and close
We must not close the subflows before all the MPTCP level
data, comprising the DATA_FIN has been acked at the MPTCP
level, otherwise we could be unable to retransmit as needed.
__mptcp_wr_shutdown() shutdown is responsible to check for the
correct status and close all subflows. Is called by the output
path after spooling any data and at shutdown/close time.
In a similar way, __mptcp_destroy_sock() is responsible to clean-up
the MPTCP level status, and is called when the msk transition
to TCP_CLOSE.
The protocol level close() does not force anymore the TCP_CLOSE
status, but orphan the msk socket and all the subflows.
Orphaned msk sockets are forciby closed after a timeout or
when all MPTCP-level data is acked.
There is a caveat about keeping the orphaned subflows around:
the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via
tcp_close(). To prevent accessing freed memory on later MPTCP
level operations, the msk acquires a reference to each subflow
socket and prevent subflow_ulp_release() from releasing the
subflow context before __mptcp_destroy_sock().
The additional subflow references are released by __mptcp_done()
and the async ULP release is detected checking ULP ops. If such
field has been already cleared by the ULP release path, the
dangling context is freed directly by __mptcp_done().
Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Mon, 16 Nov 2020 09:48:06 +0000 (10:48 +0100)]
mptcp: reduce the arguments of mptcp_sendmsg_frag
The current argument list is pretty long and quite unreadable,
move many of them into a specific struct. Later patches
will add more stuff to such struct.
Additionally drop the 'timeo' argument, now unused.
Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Mon, 16 Nov 2020 09:48:03 +0000 (10:48 +0100)]
mptcp: use tcp_build_frag()
mptcp_push_pending() is called even on orphaned
msk (and orphaned subflows), if there is outstanding
data at close() time.
To cope with the above MPTCP needs to handle explicitly
the allocation failure on xmit. The newly introduced
do_tcp_sendfrag() allows that, just plug it.
We can additionally drop a couple of sanity checks,
duplicate in the TCP code.
Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Fix inefficiences and rename nla_strlcpy
This patch set answers to first three issues listed in:
https://github.com/KSPP/linux/issues/110
To sum up, the patch contributions are the following:
1. the first patch fixes an inefficiency where some bytes in dst were written
twice, one with 0 the other with src content.
2. The second one modifies nla_strlcpy to return the same value as strscpy,
i.e. number of bytes written or -E2BIG if src was truncated.
It also modifies code that calls nla_strlcpy and checks for its return value.
3. The third renames nla_strlcpy to nla_strscpy.
Unfortunately, I did not find how to create struct nlattr objects so I tested
my modifications on simple char* and with GDB using tc to get to
tcf_proto_check_kind.
====================
Francis Laniel [Sun, 15 Nov 2020 17:08:05 +0000 (18:08 +0100)]
Modify return value of nla_strlcpy to match that of strscpy.
nla_strlcpy now returns -E2BIG if src was truncated when written to dst.
It also returns this error value if dstsize is 0 or higher than INT_MAX.
For example, if src is "foo\0" and dst is 3 bytes long, the result will be:
1. "foG" after memcpy (G means garbage).
2. "fo\0" after memset.
3. -E2BIG is returned because src was not completely written into dst.
The callers of nla_strlcpy were modified to take into account this modification.
Signed-off-by: Francis Laniel <laniel_francis@privacyrequired.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Francis Laniel [Sun, 15 Nov 2020 17:08:04 +0000 (18:08 +0100)]
Fix unefficient call to memset before memcpu in nla_strlcpy.
Before this commit, nla_strlcpy first memseted dst to 0 then wrote src into it.
This is inefficient because bytes whom number is less than src length are written
twice.
This patch solves this issue by first writing src into dst then fill dst with
0's.
Note that, in the case where src length is higher than dst, only 0 is written.
Otherwise there are as many 0's written to fill dst.
For example, if src is "foo\0" and dst is 5 bytes long, the result will be:
1. "fooGG" after memcpy (G means garbage).
2. "foo\0\0" after memset.
Signed-off-by: Francis Laniel <laniel_francis@privacyrequired.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit [Sat, 14 Nov 2020 20:49:53 +0000 (21:49 +0100)]
r8169: improve rtl8169_start_xmit
Improve the following in rtl8169_start_xmit:
- tp->cur_tx can be accessed in parallel by rtl_tx(), therefore
annotate the race by using WRITE_ONCE
- avoid checking stop_queue a second time by moving the doorbell check
- netif_stop_queue() uses atomic operation set_bit() that includes a
full memory barrier on some platforms, therefore use
smp_mb__after_atomic to avoid overhead
====================
mlxsw: Preparations for nexthop objects support - part 1/2
This patch set contains small and non-functional changes aimed at making
it easier to support nexthop objects in mlxsw. Follow up patches can be
found here [1].
Patches #1-#4 add a type field to the nexthop group struct instead of
the existing protocol field. This will be used later on to add a nexthop
object type, which can contain both IPv4 and IPv6 nexthops.
Patches #5-#7 move the IPv4 FIB info pointer (i.e., 'struct fib_info')
from the nexthop group struct to the route. The pointer will not be
available when the nexthop group is a nexthop object, but it needs to be
accessible to routes regardless.
Patch #8 is the biggest change, but it is an entirely cosmetic change
and should therefore be easy to review. The motivation and the change
itself are explained in detail in the commit message.
Patches #9-#12 perform small changes so that two functions that are
currently split between IPv4 and IPv6 could be consolidated in patches
Ido Schimmel [Fri, 13 Nov 2020 16:05:53 +0000 (18:05 +0200)]
mlxsw: spectrum_ipip: Remove overlay protocol from can_offload() callback
The overlay protocol (i.e., IPv4/IPv6) that is being encapsulated has
no impact on whether a certain IP tunnel can be offloaded or not. Only
the underlay protocol matters.
Therefore, remove the unused overlay protocol parameter from the
callback.
This will later allow us to consolidate code paths between IPv4 and IPv6
code.
Ido Schimmel [Fri, 13 Nov 2020 16:05:52 +0000 (18:05 +0200)]
mlxsw: spectrum_router: Split nexthop group configuration to a different struct
Currently, the individual nexthops member in the group and attributes of
the group (e.g., its type) are stored in the same struct (i.e., 'struct
mlxsw_sp_nexthop_group'). This is fine since the individual nexthops
cannot change during the lifetime of the group.
With nexthop objects this is no longer the case. An existing nexthop
group can be replaced to use a new set of nexthops. Creating a new
struct whenever a group is replaced entails replacing the group pointer
of all the routes (i.e., 'struct mlxsw_sp_fib_entry') using the group.
Avoid this inefficient step by splitting the nexthop group configuration
to a different struct (i.e., 'struct mlxsw_sp_nexthop_group_info').
When a nexthop group is replaced a new group info struct is created and
the individual rotues do not need to be touched.
Ido Schimmel [Fri, 13 Nov 2020 16:05:51 +0000 (18:05 +0200)]
mlxsw: spectrum_router: Move IPv4 FIB info into a union in nexthop group struct
Instead of storing the FIB info as 'priv' when the nexthop group
represents an IPv4 nexthop group, simply store it as a FIB info with a
proper comment.
When nexthop objects are supported, this field will become a union with
the nexthop object's identifier.
Ido Schimmel [Fri, 13 Nov 2020 16:05:49 +0000 (18:05 +0200)]
mlxsw: spectrum_router: Store FIB info in route
When needed, IPv4 routes fetch the FIB info (i.e., 'struct fib_info')
from their associated nexthop group. This will not work when the nexthop
group represents a nexthop object (i.e., 'struct nexthop'), as it will
only have access to the nexthop's identifier.
Ido Schimmel [Fri, 13 Nov 2020 16:05:48 +0000 (18:05 +0200)]
mlxsw: spectrum_router: Associate neighbour table with nexthop instead of group
As explained in the previous patch, nexthop objects can have both IPv4
and IPv6 nexthops in the same group. Therefore, move the neighbour table
to be a property of the nexthop instead of the nexthop group.
Ido Schimmel [Fri, 13 Nov 2020 16:05:46 +0000 (18:05 +0200)]
mlxsw: spectrum_router: Add nexthop group type field
Currently, the type (i.e., IPv4/IPv6) of the nexthop group is derived
from the neighbour table associated with the group.
This is problematic when nexthop objects are taken into account, as a
nexthop group object can contain both IPv4 and IPv6 nexthops.
Instead, add a new field that indicates the type of the group and
initialize it during the group's creation. Currently, the types are IPv4
('struct fib_info') and IPv6 ('struct fib6_info'). In the future another
type will be added for nexthop objects ('struct nexthop').
Ido Schimmel [Fri, 13 Nov 2020 16:05:45 +0000 (18:05 +0200)]
mlxsw: spectrum_router: Compare key with correct object type
When comparing a key with a nexthop group in rhastable's obj_cmpfn()
callback, make sure that the key and nexthop group are of the same type
(i.e., IPv4 / IPv6).
The bug is not currently visible because IPv6 nexthop groups do not
populate the FIB info pointer and IPv4 nexthop groups do not set the
ifindex for the individual nexthops.
Jakub Kicinski [Sat, 14 Nov 2020 21:23:01 +0000 (13:23 -0800)]
Merge branch 'ionic-updates'
Shannon Nelson says:
====================
ionic updates
These updates are a bit of code cleaning and a minor
bit of performance tweaking.
v3: convert ionic_lif_quiesce() to void
v2: added void cast on call to ionic_lif_quiesce()
lowered batching threshold
added patch to flatten calls to ionic_lif_rx_mode
added patch to change from_ndo to can_sleep
====================
Shannon Nelson [Thu, 12 Nov 2020 18:22:08 +0000 (10:22 -0800)]
ionic: useful names for booleans
With a few more uses of true and false in function calls, we
need to give them some useful names so we can tell from the
calling point what we're doing.
Signed-off-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shannon Nelson [Thu, 12 Nov 2020 18:22:07 +0000 (10:22 -0800)]
ionic: change set_rx_mode from_ndo to can_sleep
Instead of having two different ways of expressing the same
sleepability concept, using opposite logic, we can rework the
from_ndo to can_sleep for a more consistent usage.
Fixes: 1800eee16676 ("net: ionic: Replace in_interrupt() usage.") Signed-off-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shannon Nelson [Thu, 12 Nov 2020 18:22:05 +0000 (10:22 -0800)]
ionic: use mc sync for multicast filters
We should be using the multicast sync routines for the multicast
filters. Also, let's just flatten the logic a bit and pull
the small unicast routine back into ionic_set_rx_mode().
Fixes: 1800eee16676 ("net: ionic: Replace in_interrupt() usage.") Signed-off-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shannon Nelson [Thu, 12 Nov 2020 18:22:04 +0000 (10:22 -0800)]
ionic: batch rx buffer refilling
We don't need to refill the rx descriptors on every napi
if only a few were handled. Waiting until we can batch up
a few together will save us a few Rx cycles.
Signed-off-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shannon Nelson [Thu, 12 Nov 2020 18:22:03 +0000 (10:22 -0800)]
ionic: add lif quiesce
After the queues are stopped, expressly quiesce the lif.
This assures that even if the queues were in an odd state,
the firmware will close up everything cleanly.
Signed-off-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shannon Nelson [Thu, 12 Nov 2020 18:22:02 +0000 (10:22 -0800)]
ionic: check for link after netdev registration
Request a link check as soon as the netdev is registered rather
than waiting for the watchdog to go off in order to get the
interface operational a little more quickly.
Signed-off-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lukas Bulwahn [Fri, 13 Nov 2020 13:50:12 +0000 (14:50 +0100)]
ipv6: remove unused function ipv6_skb_idev()
Commit bdb7cc643fc9 ("ipv6: Count interface receive statistics on the
ingress netdev") removed all callees for ipv6_skb_idev(). Hence, since
then, ipv6_skb_idev() is unused and make CC=clang W=1 warns:
net/ipv6/exthdrs.c:909:33:
warning: unused function 'ipv6_skb_idev' [-Wunused-function]
So, remove this unused function and a -Wunused-function warning.
1) Add BTF generation for kernel modules and extend BTF infra in kernel
e.g. support for split BTF loading and validation, from Andrii Nakryiko.
2) Support for pointers beyond pkt_end to recognize LLVM generated patterns
on inlined branch conditions, from Alexei Starovoitov.
3) Implements bpf_local_storage for task_struct for BPF LSM, from KP Singh.
4) Enable FENTRY/FEXIT/RAW_TP tracing program to use the bpf_sk_storage
infra, from Martin KaFai Lau.
5) Add XDP bulk APIs that introduce a defer/flush mechanism to optimize the
XDP_REDIRECT path, from Lorenzo Bianconi.
6) Fix a potential (although rather theoretical) deadlock of hashtab in NMI
context, from Song Liu.
7) Fixes for cross and out-of-tree build of bpftool and runqslower allowing build
for different target archs on same source tree, from Jean-Philippe Brucker.
8) Fix error path in htab_map_alloc() triggered from syzbot, from Eric Dumazet.
9) Move functionality from test_tcpbpf_user into the test_progs framework so it
can run in BPF CI, from Alexander Duyck.
10) Lift hashtab key_size limit to be larger than MAX_BPF_STACK, from Florian Lehner.
Note that for the fix from Song we have seen a sparse report on context
imbalance which requires changes in sparse itself for proper annotation
detection where this is currently being discussed on linux-sparse among
developers [0]. Once we have more clarification/guidance after their fix,
Song will follow-up.
* git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (66 commits)
net: mlx5: Add xdp tx return bulking support
net: mvpp2: Add xdp tx return bulking support
net: mvneta: Add xdp tx return bulking support
net: page_pool: Add bulk support for ptr_ring
net: xdp: Introduce bulking for xdp tx return path
bpf: Expose bpf_d_path helper to sleepable LSM hooks
bpf: Augment the set of sleepable LSM hooks
bpf: selftest: Use bpf_sk_storage in FENTRY/FEXIT/RAW_TP
bpf: Allow using bpf_sk_storage in FENTRY/FEXIT/RAW_TP
bpf: Rename some functions in bpf_sk_storage
bpf: Folding omem_charge() into sk_storage_charge()
selftests/bpf: Add asm tests for pkt vs pkt_end comparison.
selftests/bpf: Add skb_pkt_end test
bpf: Support for pointers beyond pkt_end.
tools/bpf: Always run the *-clean recipes
tools/bpf: Add bootstrap/ to .gitignore
bpf: Fix NULL dereference in bpf_task_storage
tools/bpftool: Fix build slowdown
tools/runqslower: Build bpftool using HOSTCC
tools/runqslower: Enable out-of-tree build
...
====================
Steen Hegelund [Thu, 12 Nov 2020 09:22:50 +0000 (10:22 +0100)]
net: phy: mscc: Add PTP support for 2 more VSC PHYs
Add VSC8572 and VSC8574 in the PTP configuration
as they also support PTP.
The relevant datasheets can be found here:
- VSC8572: https://www.microchip.com/wwwproducts/en/VSC8572
- VSC8574: https://www.microchip.com/wwwproducts/en/VSC8574
Daniel Borkmann [Sat, 14 Nov 2020 01:29:00 +0000 (02:29 +0100)]
Merge branch 'xdp-redirect-bulk'
Lorenzo Bianconi says:
====================
XDP bulk APIs introduce a defer/flush mechanism to return
pages belonging to the same xdp_mem_allocator object
(identified via the mem.id field) in bulk to optimize
I-cache and D-cache since xdp_return_frame is usually
run inside the driver NAPI tx completion loop.
Convert mvneta, mvpp2 and mlx5 drivers to xdp_return_frame_bulk APIs.
More details on benchmarks run on mlx5 can be found here:
https://github.com/xdp-project/xdp-project/blob/master/areas/mem/xdp_bulk_return01.org
Changes since v5:
- do not keep looping over ptr_ring if the cache is full but release leftover
pages running page_pool_return_page
Changes since v3:
- align DEV_MAP_BULK_SIZE to XDP_BULK_QUEUE_SIZE
- refactor page_pool_put_page_bulk to avoid code duplication
Changes since v2:
- move mvneta changes in a dedicated patch
Changes since v1:
- improve comments
- rework xdp_return_frame_bulk routine logic
- move count and xa fields at the beginning of xdp_frame_bulk struct
- invert logic in page_pool_put_page_bulk for loop
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Lorenzo Bianconi [Fri, 13 Nov 2020 11:48:28 +0000 (12:48 +0100)]
net: xdp: Introduce bulking for xdp tx return path
XDP bulk APIs introduce a defer/flush mechanism to return
pages belonging to the same xdp_mem_allocator object
(identified via the mem.id field) in bulk to optimize
I-cache and D-cache since xdp_return_frame is usually run
inside the driver NAPI tx completion loop.
The bulk queue size is set to 16 to be aligned to how
XDP_REDIRECT bulking works. The bulk is flushed when
it is full or when mem.id changes.
xdp_frame_bulk is usually stored/allocated on the function
call-stack to avoid locking penalties.
Current implementation considers only page_pool memory model.
Heiner Kallweit [Wed, 11 Nov 2020 21:56:29 +0000 (22:56 +0100)]
r8169: improve rtl_tx
We can simplify the for() condition and eliminate variable tx_left.
The change also considers that tp->cur_tx may be incremented by a
racing rtl8169_start_xmit().
In addition replace the write to tp->dirty_tx and the following
smp_mb() with an equivalent call to smp_store_mb(). This implicitly
adds a WRITE_ONCE() to the write.
Heiner Kallweit [Wed, 11 Nov 2020 21:14:27 +0000 (22:14 +0100)]
r8169: use READ_ONCE in rtl_tx_slots_avail
tp->dirty_tx and tp->cur_tx may be changed by a racing rtl_tx() or
rtl8169_start_xmit(). Use READ_ONCE() to annotate the races and ensure
that the compiler doesn't use cached values.
Jakub Kicinski [Fri, 13 Nov 2020 23:37:10 +0000 (15:37 -0800)]
Merge branch 'net-ipa-two-fixes'
Alex Elder says:
====================
net: ipa: two fixes
This small series makes two fixes to the IPA code:
- While reviewing something else I found that one of the resource
limits on the SDM845 used the wrong value. The first patch
fixes this. The correct value allocates more resources of this
type for IPA to use, and otherwise does not change behavior.
- When the IPA-resident microcontroller starts up it generates an
event, which triggers an AP interrupt. The event merely
provides some information for logging, which we don't support.
We already ignore the event, and that's harmless. So this
patch explicitly ignores it rather than issuing a warning when
it occurs.
====================
Alex Elder [Thu, 12 Nov 2020 12:20:00 +0000 (06:20 -0600)]
net: ipa: ignore the microcontroller log event
The IPA-resident microcontroller has the ability to log various
activity in an area of IPA shared memory. When the microcontroller
starts it generates an event to the AP to provide information about
the log.
We don't support reading this log, and we can safely ignore the
event. So do that rather than treating the log info event we
receive as "unsupported."
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / users / jedix / linux-maple.git / log