Input: focaltech - mark focaltech_set_resolution() static
We get 1 warning when building kernel with W=1:
drivers/input/mouse/focaltech.c:393:6: warning: no previous prototype for 'focaltech_set_resolution' [-Wmissing-prototypes]
In fact, this function is only used in the file in which it is
declared and don't need a declaration, but can be made static.
So this patch marks it 'static'.
Vladimir Zapolskiy [Sat, 3 Sep 2016 17:39:07 +0000 (10:39 -0700)]
Input: gpio-keys-polled - don't use unit-address with button nodes
The change corrects an example in device tree documentation section,
because button/key device nodes don't contain reg property there is
no need to declare unit-address, and address and size cell properties
are also redundant.
At the moment a compilation of the hypothetical original example
should produce W=1 level warnings, and it is better to stop spreading
misusage of the polled gpio keys device tree binding through this
example.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Vignesh R [Thu, 25 Aug 2016 16:46:41 +0000 (09:46 -0700)]
Input: add generic input driver to read encoded GPIO lines
Add a driver to read group of GPIO lines and provide its status as a
numerical value as input event to the system. This will help in
interfacing devices, that can be connected over GPIOs, that provide
input to the system by driving GPIO lines connected to them like a
rotary dial or a switch.
For example, a rotary switch can be connected to four GPIO lines. The
status of the GPIO lines reflect the actual position of the rotary
switch dial. For example, if dial points to 9, then the four GPIO lines
connected to the switch will read HLLH(0b'1001 = 9). This value
can be reported as an ABS_* event to the input subsystem.
Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Alexandre Belloni [Tue, 30 Aug 2016 02:57:06 +0000 (19:57 -0700)]
Input: add ADC resistor ladder driver
A common way of multiplexing buttons on a single input in cheap devices is
to use a resistor ladder on an ADC. This driver supports that configuration
by polling an ADC channel provided by IIO.
Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Johnny Chuang [Thu, 25 Aug 2016 16:26:53 +0000 (09:26 -0700)]
Input: elants_i2c - get product id on recovery mode for FW update
We use hw version to construct name of file holding touchscreen firmware,
so let's try reading it even if touchscreen initialization fails (the
firmware supports reading product/hardware id even when device is in
recovery/boot mode).
Signed-off-by: Johnny Chuang <johnny.chuang@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
It queues work items via &wm->ts_reader and &wm->pen_event_work which map
to wm97xx_pen_irq_worker (handles a pen down interrupt) and
wm97xx_ts_reader (the touchscreen sample reader) respectively. Hence, an
ordered dedicated workqueue has been used.
The workqueue "workqueue" has a single workitem(&priv->work) and hence
doesn't require ordering. Also, it is not being used on a memory reclaim
path. Hence, the singlethreaded workqueue has been replaced with the use
of system_wq.
System workqueues have been able to handle high level of concurrency
for a long time now and hence it's not required to have a singlethreaded
workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue
created with create_singlethread_workqueue(), system_wq allows multiple
work items to overlap executions even on the same CPU; however, a
per-cpu workqueue doesn't have any CPU locality or global ordering
guarantee unless the target CPU is explicitly specified and thus the
increase of local concurrency shouldn't make any difference.
Workitem is sync cancelled in mc13783_ts_remove() to ensure that there
are no workitems pending when the driver is disconnected.
alloc_ordered_workqueue() replaces the deprecated
create_singlethread_workqueue().
There are multiple work items on the work queue viz
&priv->dev3_register_work, &priv->recalib_wq, &psmouse->resync_work,
which require execution ordering. Hence, an ordered workqueue has been
used.
The workqueue is not being used on a memory reclaim path. Hence,
WQ_MEM_RECLAIM has not been set.
Russell King [Fri, 19 Aug 2016 16:41:47 +0000 (09:41 -0700)]
Input: jornada720_kbd - get rid of mach/irqs.h include
Switch the jornada720 keyboard driver to obtain its interrupt from the
platform device, rather than via a hard-coded interrupt number obtained
from the mach/irqs.h header.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Krzysztof Kozlowski [Fri, 19 Aug 2016 17:15:46 +0000 (10:15 -0700)]
Input: max77693-haptic - change Krzysztof Kozlowski's email to kernel.org
Change my email address to kernel.org instead of Samsung one for the
purpose of any future contact. The copyrights remain untouched and are
attributed to Samsung.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Hans de Goede [Thu, 4 Aug 2016 15:21:19 +0000 (08:21 -0700)]
Input: remove duplicate ft6236 driver
The new(ish) ft6236 simply re-implements the M09 protocol of the
(much) older edt-ft5x06.c driver.
This commit removes this duplicate driver and adds the i2c ids and
dt compatible string to the edt-ft5x06.c driver to keep compatibility.
This commit also adds the standard touchscreen properties as optional
properties to the edt,ft5x06 binding, these were documented in the
focaltech,ft6236 bindingi, but were missing from the edt,ft5x06 doc.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: elan_i2c - properly wake up touchpad on ASUS laptops
Some ASUS laptops were shipped with touchpads that require to be woken up
first, before trying to switch them into absolute reporting mode, otherwise
touchpad would fail to work while flooding the logs with:
elan_i2c i2c-ELAN1000:00: invalid report id data (1)
Among affected devices are Asus E202SA, N552VW, X456UF, UX305CA, and
others. We detect such devices by checking the IC type and product ID
numbers and adjusting order of operations accordingly.
Robert Dolca [Thu, 28 Jul 2016 21:28:46 +0000 (14:28 -0700)]
Input: add driver for Silead touchscreens
This driver adds support for Silead touchscreens. It has been tested
with GSL1680 and GSL3680 touch panels.
It supports ACPI and device tree enumeration. Screen resolution,
the maximum number of fingers supported and firmware name are
configurable.
Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Daniel Jansen <djaniboe@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: xpad - power off wireless 360 controllers on suspend
When the USB wireless adapter is suspended, the controllers
lose their connection. This causes them to start flashing
their LED rings and searching for the wireless adapter
again, wasting the controller's battery power.
Instead, we will tell the controllers to power down when
we suspend. This mirrors the behavior of the controllers
when connected to the console itself and how the official
Xbox One wireless adapter behaves on Windows.
Input: i8042 - break load dependency between atkbd/psmouse and i8042
As explained in 1407814240-4275-1-git-send-email-decui@microsoft.com we
have a hard load dependency between i8042 and atkbd which prevents
keyboard from working on Gen2 Hyper-V VMs.
> hyperv_keyboard invokes serio_interrupt(), which needs a valid serio
> driver like atkbd.c. atkbd.c depends on libps2.c because it invokes
> ps2_command(). libps2.c depends on i8042.c because it invokes
> i8042_check_port_owner(). As a result, hyperv_keyboard actually
> depends on i8042.c.
>
> For a Generation 2 Hyper-V VM (meaning no i8042 device emulated), if a
> Linux VM (like Arch Linux) happens to configure CONFIG_SERIO_I8042=m
> rather than =y, atkbd.ko can't load because i8042.ko can't load(due to
> no i8042 device emulated) and finally hyperv_keyboard can't work and
> the user can't input: https://bugs.archlinux.org/task/39820
> (Ubuntu/RHEL/SUSE aren't affected since they use CONFIG_SERIO_I8042=y)
To break the dependency we move away from using i8042_check_port_owner()
and instead allow serio port owner specify a mutex that clients should use
to serialize PS/2 command stream.
Reported-by: Mark Laws <mdl@60hz.org> Tested-by: Mark Laws <mdl@60hz.org> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Douglas Anderson [Mon, 25 Jul 2016 20:47:52 +0000 (13:47 -0700)]
Input: cros_ec_keyb - cleanup use of dev
In cros_ec_keyb we stored "dev" in "struct cros_ec_keyb", but this was
the EC's dev pointer and not the keyboard's. Let's clean this up to
make it the keyboard's dev pointer. This could be useful in future
patches but also has the nice effect of changing a few printouts to
include the name of the keyboard device instead of the EC device, so we
will see:
Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Muhammad Falak R Wani [Thu, 21 Jul 2016 00:53:18 +0000 (17:53 -0700)]
Input: tty/vt/keyboard - use memdup_user()
Use memdup_user to duplicate a memory region from user-space to
kernel-space, instead of open coding using kmalloc & copy_from_user.
Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com> Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Hans de Goede [Fri, 15 Jul 2016 21:28:11 +0000 (14:28 -0700)]
Input: icn8318 - use of_touchscreen helpers for inverting / swapping axes
Use the touchscreen_parse_properties() and touchscreen_report_pos() to
perform coordinates transformation, instead of DIY code, which results in a
nice cleanup.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Hans de Goede [Fri, 15 Jul 2016 21:05:29 +0000 (14:05 -0700)]
Input: of_touchscreen - add support for inverted / swapped axes
Extend touchscreen_parse_properties() with support for the
touchscreen-inverted-x/y and touchscreen-swapped-x-y properties and
add touchscreen_set_mt_pos() and touchscreen_report_pos() helper
functions for storing coordinates into a input_mt_pos struct, or
directly reporting them, taking these properties into account.
This commit also modifies the existing callers of
touchscreen_parse_properties() to pass in NULL for the new third
argument, keeping the existing behavior.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Andrew Duggan [Thu, 14 Jul 2016 16:38:04 +0000 (09:38 -0700)]
Input: synaptics-rmi4 - remove unneeded variable
Remove the data_base_addr_offset variable in rmi_f11_attention(). The
f11 data is read as a single block so there is no need to store an offset
to the data address.
Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Andrew Duggan [Thu, 14 Jul 2016 16:37:11 +0000 (09:37 -0700)]
Input: synaptics-rmi4 - remove pointer to rmi_function in f12_data
The pointer to struct rmi_function in f12_data is never set and was never
used. The fn pointer is also stored in rmi_2d_sensor which is a member of
f12_data.
Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Andrew Duggan [Thu, 14 Jul 2016 16:35:44 +0000 (09:35 -0700)]
Input: synaptics-rmi4 - use of_get_child_by_name() to fix refcount
Calling of_find_node_by_name() assumes that the caller has incremented
the refcount of the of_node being passed in. Currently, the caller is
not incrementing the refcount of the of_node which results in the node
being prematurely freed when of_find_node_by_name() calls of_node_put()
on it. Instead use of_get_child_by_name() which does not call put on the
of_node.
Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Revert "Input: wacom_w8001 - drop use of ABS_MT_TOOL_TYPE"
This reverts commit 5f7e5445a2de848c66d2d80ba5479197e8287c33 because
removal of input_mt_report_slot_state() means we no longer generate
tracking IDs for the reported contacts.
Cc: stable@vger.kernel.org Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Acked-by: Ping Cheng <pinglinux@gmail.com>
Input: fix a double word "is is" in include/linux/input.h
This patch fix a double word "is is" found in in
Documentation/DocBook/device-drivers.xml.
It is because the file was created from comments in sources,
so I have to fix the double words in include/linux/input.h
Douglas Anderson [Tue, 28 Jun 2016 17:32:00 +0000 (10:32 -0700)]
Input: add SW_PEN_INSERTED define
Some devices with a pen may have a switch that can be used to detect
when the pen is inserted or removed to a slot on the device. Let's add
a define to the input event codes so that everyone can be on the same
page for what event we should generate when the pen is inserted or
removed.
In general the pen switch could be used by the software on the device to
kick off any number of actions when the pen is inserted or removed.
Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Sinclair Yeh [Fri, 24 Jun 2016 00:37:34 +0000 (17:37 -0700)]
Input: vmmouse - remove port reservation
The VMWare EFI BIOS will expose port 0x5658 as an ACPI resource. This
causes the port to be reserved by the APCI module as the system comes up,
making it unavailable to be reserved again by other drivers, thus
preserving this VMWare port for special use in a VMWare guest.
This port is designed to be shared among multiple VMWare services, such as
the VMMOUSE. Because of this, VMMOUSE should not try to reserve this port
on its own.
The VMWare non-EFI BIOS does not do this to preserve compatibility with
existing/legacy VMs. It is known that there is small chance a VM may be
configured such that these ports get reserved by other non-VMWare devices,
and if this ever happens, the result is undefined.
Jorge Ramirez-Ortiz [Thu, 23 Jun 2016 00:22:03 +0000 (17:22 -0700)]
Input: add powerkey driver for HISI 65xx SoC
This driver provides a input driver for the power button on the
HiSi 65xx SoC for boards like HiKey.
This driver was originally by Zhiliang Xue <xuezhiliang@huawei.com>
then basically rewritten by Jorge, but preserving the original
module author credits.
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
[jstultz: Reworked commit message, folded in other fixes/cleanups
from Jorge, implemented some larger cleanups suggested by DmitryT] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dmitry Torokhov [Tue, 21 Jun 2016 23:09:00 +0000 (16:09 -0700)]
Input: elantech - add more IC body types to the list
The touchpad in HP Pavilion 14-ab057ca reports it's version as 12 and
according to Elan both 11 and 12 are valid IC types and should be
identified as hw_version 4.
Reported-by: Patrick Lessard <Patrick.Lessard@cogeco.com> Tested-by: Patrick Lessard <Patrick.Lessard@cogeco.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
trivial fix to spelling mistake in dev_err message
Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cameron Gutman [Thu, 23 Jun 2016 17:24:42 +0000 (10:24 -0700)]
Input: xpad - fix oops when attaching an unknown Xbox One gamepad
Xbox One controllers have multiple interfaces which all have the
same class, subclass, and protocol. One of the these interfaces
has only a single endpoint. When Xpad attempts to bind to this
interface, it causes an oops when trying initialize the output URB
by trying to access the second endpoint's descriptor.
This situation was avoided for known Xbox One devices by checking
the XTYPE constant associated with the VID and PID tuple. However,
this breaks when new or previously unknown Xbox One controllers
are attached to the system.
This change addresses the problem by deriving the XTYPE for Xbox
One controllers based on the interface protocol before checking
the interface number.
Fixes: 1a48ff81b391 ("Input: xpad - add support for Xbox One controllers") Signed-off-by: Cameron Gutman <aicommander@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pali Rohár [Sat, 18 Jun 2016 17:09:43 +0000 (10:09 -0700)]
Input: psmouse - use same format for secondary devices as for primary
This patch changes name of secondary psmouse devices to mach format of
primary device. Format of primary device is "protocol vendor name" and is
set by function psmouse_switch_protocol() in file psmouse-base.c.
Martin Kepplinger [Thu, 2 Jun 2016 16:39:00 +0000 (09:39 -0700)]
Input: add Pegasus Notetaker tablet driver
This adds a driver for the Pegasus Notetaker Pen. When connected,
this uses the Pen as an input tablet.
This device was sold in various different brandings, for example
"Pegasus Mobile Notetaker M210",
"Genie e-note The Notetaker",
"Staedtler Digital ballpoint pen 990 01",
"IRISnotes Express" or
"NEWLink Digital Note Taker".
Here's an example, so that you know what we are talking about:
http://www.genie-online.de/genie-e-note-2/
https://pegatech.blogspot.com/ seems to be a remaining official resource.
This device can also transfer saved (offline recorded handwritten) data and
there are userspace programs that do this, see https://launchpad.net/m210
(Well, alternatively there are really fast scanners out there :)
It's *really* fun to use as an input tablet though! So let's support this
for everybody.
Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cameron Gutman [Wed, 1 Jun 2016 18:32:51 +0000 (11:32 -0700)]
Input: xpad - fix rumble on Xbox One controllers with 2015 firmware
Xbox One controllers that shipped with or were upgraded to the 2015
firmware discard the current rumble packets we send. This patch changes
the Xbox One rumble packet to a form that both the newer and older
firmware will accept.
It is based on changes made to support newer Xbox One controllers in
the SteamOS brewmaster-4.1 kernel branch.
KT Liao [Fri, 20 May 2016 00:38:07 +0000 (17:38 -0700)]
Input: update input_mt_report_pointer_emulation to support hovering
For devices that are incapable of reporting per-contact distance and can
only report ABS_DISTANCE, just distance is not enough for upper layers of
OS to determine whether contact is leaving the area or if it is continuing
hovering, we need BTN_TOOL_FINGER for that:
Dmitry Torokhov [Wed, 1 Jun 2016 01:15:04 +0000 (18:15 -0700)]
Input: raydium_i2c_ts - do not ignore EPROBE_DEFER from gpiod_get_optional
We should not be ignoring -EPROBE_DEFER reported by
devm_gpiod_get_optional(), but report it as any other error to the upper
layers. While we are at it simplify check for the presence of reset GPIO
and instead of using IS_ERR_OR_NULL just use boolean.
Also do not return -ENOMEM from suspend handler when the device in
bootloader mode as that does not make sense and switch to -EBUSY instead.
Manfred Schlaegl [Fri, 27 May 2016 23:36:36 +0000 (16:36 -0700)]
Input: pwm-beeper - fix - scheduling while atomic
Pwm config may sleep so defer it using a worker.
On a Freescale i.MX53 based board we ran into "BUG: scheduling while
atomic" because input_inject_event locks interrupts, but
imx_pwm_config_v2 sleeps.
Stephen Just [Fri, 27 May 2016 23:29:39 +0000 (16:29 -0700)]
Input: surface3_spi - add surface pen support for Surface 3
This change creates a second input device which will handle input from
a Surface Pen. The Surface Pen supplies a different packet header than
touch events, so it is simple to handle one or the other.
This patch handles both the newer Surface Pen with one button, and the
older variant with a second button to switch to Eraser mode.
Signed-off-by: Stephen Just <stephenjust@gmail.com> Reviewed-and-tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Stephen Just [Fri, 27 May 2016 23:28:09 +0000 (16:28 -0700)]
Input: surface3_spi - Prepare to add support for Surface Pen
Surface Pens can be supported by handling a second report type. Prepare
for this change.
Signed-off-by: Stephen Just <stephenjust@gmail.com> Reviewed-and-tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cameron Gutman [Fri, 27 May 2016 23:23:50 +0000 (16:23 -0700)]
Input: xpad - prevent spurious input from wired Xbox 360 controllers
After initially connecting a wired Xbox 360 controller or sending it
a command to change LEDs, a status/response packet is interpreted as
controller input. This causes the state of buttons represented in
byte 2 of the controller data packet to be incorrect until the next
valid input packet. Wireless Xbox 360 controllers are not affected.
Writing a new value to the LED device while holding the Start button
and running jstest is sufficient to reproduce this bug. An event will
come through with the Start button released.
Xboxdrv also won't attempt to read controller input from a packet
where byte 0 is non-zero. It also checks that byte 1 is 0x14, but
that value differs between wired and wireless controllers and this
code is shared by both. I think just checking byte 0 is enough to
eliminate unwanted packets.
The following are some examples of 3-byte status packets I saw:
01 03 02
02 03 00
03 03 03
08 03 00
Ricky Liang [Fri, 20 May 2016 17:58:59 +0000 (10:58 -0700)]
Input: uinput - handle compat ioctl for UI_SET_PHYS
When running a 32-bit userspace on a 64-bit kernel, the UI_SET_PHYS
ioctl needs to be treated with special care, as it has the pointer
size encoded in the command.
Benjamin Tissoires [Thu, 19 May 2016 16:24:06 +0000 (09:24 -0700)]
Input: add new driver for the Surface 3
This is a basic driver for the Surface 3. I am not so sure it will work
with any firmwares as most values are encoded, but given that I only have
access to my current device with its firmware and I don't have the
datasheet, it should be OK for now.
The Surface Pen is not supported (if it is supposed to be). I'll work on
this when I get one.
Dmitry Torokhov [Sat, 23 Jan 2016 19:29:13 +0000 (11:29 -0800)]
Input: feed more data into entropy pool
Commit 4369c64c79a22 ("Input: Send events one packet at a time")
significantly reduced amount of entropy input core was feeding to the rest
of the system, because only the very first event in the event block would
be used as source of entropy.
With this change we will be calling add_input_randomness() for every event
that is not filtered by the input core as a duplicate. In addition, all
EV_SYN events are ignored.
Acked-by: Henrik Rydberg <rydberg@bitmath.org> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Arnd Bergmann [Thu, 19 May 2016 16:14:53 +0000 (09:14 -0700)]
Input: migor-ts - mark PM functions as __maybe_unused
The migor touchscreen driver is now available for COMPILE_TEST,
so we run into a harmless randconfig warning on ARM when CONFIG_PM
is disabled:
drivers/input/touchscreen/migor_ts.c:216:12: error: 'migor_ts_resume' defined but not used [-Werror=unused-function]
drivers/input/touchscreen/migor_ts.c:205:12: error: 'migor_ts_suspend' defined but not used [-Werror=unused-function]
This shuts up the warning by marking the two functions as __maybe_unused.
We could do the same thing by adding an #ifdef, but this version is
more reliable.
Arnd Bergmann [Thu, 19 May 2016 16:14:02 +0000 (09:14 -0700)]
Input: atmel_captouch - add dependence on i2c
The newly added Atmal captouch driver fails to build when CONFIG_I2C
is disabled:
drivers/input/misc/atmel_captouch.c: In function 'atmel_read':
drivers/input/misc/atmel_captouch.c:115:8: error: implicit declaration of function 'i2c_transfer' [-Werror=implicit-function-declaration]
This adds an explicit Kconfig dependency to prevent the broken
configuration.
Fixes: e54bcde3d69d ("arm64: eBPF JIT compiler") Signed-off-by: Zi Shen Lim <zlim.lnx@gmail.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Yang Shi <yang.shi@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 14 May 2016 18:11:44 +0000 (11:11 -0700)]
nf_conntrack: avoid kernel pointer value leak in slab name
The slab name ends up being visible in the directory structure under
/sys, and even if you don't have access rights to the file you can see
the filenames.
Just use a 64-bit counter instead of the pointer to the 'net' structure
to generate a unique name.
This code will go away in 4.7 when the conntrack code moves to a single
kmemcache, but this is the backportable simple solution to avoiding
leaking kernel pointers to user space.
Fixes: 5b3501faa874 ("netfilter: nf_conntrack: per netns nf_conntrack_cachep") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 14 May 2016 18:59:43 +0000 (11:59 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"Overlayfs fixes from Miklos, assorted fixes from me.
Stable fodder of varying severity, all sat in -next for a while"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ovl: ignore permissions on underlying lookup
vfs: add lookup_hash() helper
vfs: rename: check backing inode being equal
vfs: add vfs_select_inode() helper
get_rock_ridge_filename(): handle malformed NM entries
ecryptfs: fix handling of directory opening
atomic_open(): fix the handling of create_error
fix the copy vs. map logics in blk_rq_map_user_iov()
do_splice_to(): cap the size before passing to ->splice_read()
projects / users / willy / linux.git / log