Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-48-philmd@linaro.org>
The sd_normal_command() switch case for the SEND_DSR
command do nothing and fallback to "illegal command".
Since the command is mandatory (although the register
isn't...) call the sd_cmd_unimplemented() handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-43-philmd@linaro.org>
Philippe Mathieu-Daudé [Wed, 1 Jun 2022 05:55:03 +0000 (07:55 +0200)]
hw/sd/sdcard: Convert PROGRAM_CID to generic_write_byte (CMD26)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-33-philmd@linaro.org>
Philippe Mathieu-Daudé [Wed, 1 Jun 2022 05:51:01 +0000 (07:51 +0200)]
hw/sd/sdcard: Convert WRITE_SINGLE_BLOCK to generic_write_byte (CMD24)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-32-philmd@linaro.org>
All commands switching from TRANSFER state to (receiving)DATA
do the same: receive stream of data from the DAT lines. Instead
of duplicating the same code many times, introduce 2 helpers:
- sd_cmd_to_receivingdata() on the I/O line setup the data to
be received on the data[] buffer,
- sd_generic_write_byte() on the DAT lines to push the data.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-30-philmd@linaro.org>
Philippe Mathieu-Daudé [Wed, 1 Jun 2022 05:24:07 +0000 (07:24 +0200)]
hw/sd/sdcard: Convert SEND_SCR to generic_read_byte (ACMD51)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-29-philmd@linaro.org>
Philippe Mathieu-Daudé [Wed, 1 Jun 2022 05:25:08 +0000 (07:25 +0200)]
hw/sd/sdcard: Convert SD_STATUS to generic_read_byte (ACMD13)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-27-philmd@linaro.org>
Philippe Mathieu-Daudé [Wed, 1 Jun 2022 05:15:10 +0000 (07:15 +0200)]
hw/sd/sdcard: Convert SEND_TUNING_BLOCK to generic_read_byte (CMD19)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-24-philmd@linaro.org>
Philippe Mathieu-Daudé [Wed, 1 Jun 2022 05:27:51 +0000 (07:27 +0200)]
hw/sd/sdcard: Convert READ_SINGLE_BLOCK to generic_read_byte (CMD17)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-23-philmd@linaro.org>
Philippe Mathieu-Daudé [Wed, 1 Jun 2022 05:13:05 +0000 (07:13 +0200)]
hw/sd/sdcard: Convert SEND_CSD/SEND_CID to generic_read_byte (CMD9 & 10)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-21-philmd@linaro.org>
Philippe Mathieu-Daudé [Thu, 13 Jun 2024 14:21:12 +0000 (16:21 +0200)]
hw/sd/sdcard: Introduce sd_cmd_to_sendingdata and sd_generic_read_byte
All commands switching from TRANSFER state to (sending)DATA
do the same: send stream of data on the DAT lines. Instead
of duplicating the same code many times, introduce 2 helpers:
- sd_cmd_to_sendingdata() on the I/O line setup the data to
be transferred,
- sd_generic_read_byte() on the DAT lines to fetch the data.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <4c9f7f51-83ee-421a-8690-9af2e80b134b@linaro.org>
Cédric Le Goater [Wed, 25 May 2022 07:21:22 +0000 (09:21 +0200)]
hw/sd/sdcard: Introduce definitions for EXT_CSD register
Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@redhat.com> Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Cédric Le Goater <clg@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240628070216.92609-18-philmd@linaro.org>
Philippe Mathieu-Daudé [Mon, 26 Oct 2020 00:32:52 +0000 (01:32 +0100)]
hw/sd/sdcard: Extract sd_blk_len() helper
Extract sd_blk_len() helper, use definitions instead
of magic values.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-15-philmd@linaro.org>
Philippe Mathieu-Daudé [Mon, 24 Jun 2024 18:18:46 +0000 (20:18 +0200)]
hw/sd/sdcard: Assign SDCardStates enum values
SDCardStates enum values are specified, so assign them
correspondingly. It will be useful later when we add
states from later specs, which might not be continuous.
See CURRENT_STATE bits in section 4.10.1 "Card Status".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-11-philmd@linaro.org>
Philippe Mathieu-Daudé [Thu, 20 Jun 2024 07:43:26 +0000 (09:43 +0200)]
hw/sd/sdcard: Trace requested address computed by sd_req_get_address()
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Luc Michel <luc.michel@amd.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-6-philmd@linaro.org>
Philippe Mathieu-Daudé [Thu, 13 Jun 2024 23:44:28 +0000 (01:44 +0200)]
hw/sd/sdcard: Track last command used to help logging
The command is selected on the I/O lines, and further
processing might be done on the DAT lines via the
sd_read_byte() and sd_write_byte() handlers. Since
these methods can't distinct between normal and APP
commands, keep the name of the current command in
the SDState and use it in the DAT handlers. This
fixes a bug that all normal commands were displayed
as APP commands.
Fixes: 2ed61fb57b ("sdcard: Display command name when tracing CMD/ACMD") Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-4-philmd@linaro.org>
Philippe Mathieu-Daudé [Thu, 27 Jun 2024 06:57:38 +0000 (08:57 +0200)]
hw/sd/sdcard: Deprecate support for spec v1.10
We use the v2.00 spec by default since commit 2f0939c234
("sdcard: Add a 'spec_version' property, default to Spec v2.00").
Time to deprecate the v1.10 which doesn't bring much, and
is not tested.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@redhat.com> Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240627071040.36190-2-philmd@linaro.org>
Richard Henderson [Mon, 1 Jul 2024 17:41:45 +0000 (10:41 -0700)]
Merge tag 'pull-target-arm-20240701' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* tests/avocado: update firmware for sbsa-ref and use all cores
* hw/arm/smmu-common: Replace smmu_iommu_mr with smmu_find_sdev
* arm: Fix VCMLA Dd, Dn, Dm[idx]
* arm: Fix SQDMULH (by element) with Q=0
* arm: Fix FJCVTZS vs flush-to-zero
* arm: More conversion of A64 AdvSIMD to decodetree
* arm: Enable FEAT_Debugv8p8 for -cpu max
* MAINTAINERS: Update family name for Patrick Leis
* hw/arm/xilinx_zynq: Add boot-mode property
* docs/system/arm: Add a doc for zynq board
* hw/misc: In STM32L4x5 EXTI, correct configurable interrupts
* tests/qtest: fix minor issues in STM32L4x5 tests
* tag 'pull-target-arm-20240701' of https://git.linaro.org/people/pmaydell/qemu-arm: (29 commits)
tests/qtest: Ensure STM32L4x5 EXTI state is correct at the end of QTests
hw/misc: In STM32L4x5 EXTI, correct configurable interrupts
tests/qtest: Fix STM32L4x5 SYSCFG irq line 15 state assumption
docs/system/arm: Add a doc for zynq board
hw/arm/xilinx_zynq: Add boot-mode property
hw/misc/zynq_slcr: Add boot-mode property
MAINTAINERS: Update my family name
target/arm: Enable FEAT_Debugv8p8 for -cpu max
target/arm: Move initialization of debug ID registers
target/arm: Fix indentation
target/arm: Delete dead code from disas_simd_indexed
target/arm: Convert FCMLA to decodetree
target/arm: Convert FCADD to decodetree
target/arm: Add data argument to do_fp3_vector
target/arm: Convert BFMMLA, SMMLA, UMMLA, USMMLA to decodetree
target/arm: Convert BFMLALB, BFMLALT to decodetree
target/arm: Convert BFDOT to decodetree
target/arm: Convert SUDOT, USDOT to decodetree
target/arm: Convert SDOT, UDOT to decodetree
target/arm: Convert SQRDMLAH, SQRDMLSH to decodetree
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Inès Varhol [Sat, 29 Jun 2024 11:07:09 +0000 (13:07 +0200)]
tests/qtest: Ensure STM32L4x5 EXTI state is correct at the end of QTests
EXTI's new field `irq_levels` tracks irq levels between tests when using
`global_qtest`.
This happens in `stm32l4x5_exti-test.c`, `stm32l4x5_syscfg-test.c` and
`stm32l4x5_gpio-test.c` (`dm163.c` doesn't use `global_qtest`).
To ensure that `irq_levels` has the same value before and after each
QTest, this commit toggles back the irq lines that were changed at the
end of each problematic test. Most QTests were already doing this.
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240629110800.539969-3-ines.varhol@telecom-paris.fr Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Inès Varhol [Sat, 29 Jun 2024 11:07:08 +0000 (13:07 +0200)]
hw/misc: In STM32L4x5 EXTI, correct configurable interrupts
The implementation of configurable interrupts (interrupts supporting
edge selection) was incorrectly expecting alternating input levels :
this commits adds a new status field `irq_levels` to actually detect
edges.
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240629110800.539969-2-ines.varhol@telecom-paris.fr Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Inès Varhol [Sat, 29 Jun 2024 10:44:49 +0000 (12:44 +0200)]
tests/qtest: Fix STM32L4x5 SYSCFG irq line 15 state assumption
The QTest `test_irq_pin_multiplexer` makes the assumption that the
reset state of irq line 15 is low, which is false since STM32L4x5 GPIO
was implemented (the reset state of pin GPIOA15 is high because there's
pull-up and it results in the irq line 15 also being high at reset).
It wasn't triggering an error because `test_interrupt` was mistakenly
"resetting" the line low.
This commit corrects these two mistakes by :
- not setting the line low in `test_interrupt`
- using an irq line in `test_irq_pin_multiplexer` which is low at reset
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240629104454.366283-1-ines.varhol@telecom-paris.fr Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Sai Pavan Boddu [Fri, 21 Jun 2024 12:59:06 +0000 (18:29 +0530)]
docs/system/arm: Add a doc for zynq board
Added the supported device list and an example command.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20240621125906.1300995-4-sai.pavan.boddu@amd.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Sai Pavan Boddu [Fri, 21 Jun 2024 12:59:05 +0000 (18:29 +0530)]
hw/arm/xilinx_zynq: Add boot-mode property
Read boot-mode value as machine property and propagate that to
SLCR.BOOT_MODE register.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com> Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20240621125906.1300995-3-sai.pavan.boddu@amd.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Sai Pavan Boddu [Fri, 21 Jun 2024 12:59:04 +0000 (18:29 +0530)]
hw/misc/zynq_slcr: Add boot-mode property
boot-mode property sets user values into BOOT_MODE register, on hardware
these are derived from board switches.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20240621125906.1300995-2-sai.pavan.boddu@amd.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Patrick Leis [Wed, 26 Jun 2024 21:16:22 +0000 (21:16 +0000)]
MAINTAINERS: Update my family name
Signed-off-by: Patrick Leis <venture@google.com>
Message-id: 20240626211623.3510701-1-venture@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Gustavo Romero [Mon, 24 Jun 2024 18:09:15 +0000 (18:09 +0000)]
target/arm: Enable FEAT_Debugv8p8 for -cpu max
Enable FEAT_Debugv8p8 for max CPU. This feature is out of scope for QEMU
since it concerns the external debug interface for JTAG, but is
mandatory in Armv8.8 implementations, hence it is reported as supported
in the ID registers.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240624180915.4528-4-gustavo.romero@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Gustavo Romero [Mon, 24 Jun 2024 18:09:14 +0000 (18:09 +0000)]
target/arm: Move initialization of debug ID registers
Move the initialization of the debug ID registers to aa32_max_features,
which is used to set the 32-bit ID registers. This ensures that the
debug ID registers are consistently set for the max CPU in a single
place.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240624180915.4528-3-gustavo.romero@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Tue, 25 Jun 2024 18:35:36 +0000 (11:35 -0700)]
target/arm: Delete dead code from disas_simd_indexed
MLA, MLS, SQDMULH, SQRDMULH, were converted with 8db93dcd3def
and f80701cb44d, and this code should have been removed then.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Tue, 25 Jun 2024 18:35:35 +0000 (11:35 -0700)]
target/arm: Convert FCMLA to decodetree
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Tue, 25 Jun 2024 18:35:34 +0000 (11:35 -0700)]
target/arm: Convert FCADD to decodetree
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Tue, 25 Jun 2024 18:35:33 +0000 (11:35 -0700)]
target/arm: Add data argument to do_fp3_vector
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Tue, 25 Jun 2024 18:35:32 +0000 (11:35 -0700)]
target/arm: Convert BFMMLA, SMMLA, UMMLA, USMMLA to decodetree
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Tue, 25 Jun 2024 18:35:31 +0000 (11:35 -0700)]
target/arm: Convert BFMLALB, BFMLALT to decodetree
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Tue, 25 Jun 2024 18:35:30 +0000 (11:35 -0700)]
target/arm: Convert BFDOT to decodetree
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Tue, 25 Jun 2024 18:35:29 +0000 (11:35 -0700)]
target/arm: Convert SUDOT, USDOT to decodetree
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Tue, 25 Jun 2024 18:35:28 +0000 (11:35 -0700)]
target/arm: Convert SDOT, UDOT to decodetree
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Tue, 25 Jun 2024 18:35:27 +0000 (11:35 -0700)]
target/arm: Convert SQRDMLAH, SQRDMLSH to decodetree
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240625183536.1672454-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Ross Lagerwall [Thu, 4 Apr 2024 14:08:33 +0000 (15:08 +0100)]
xen-hvm: Avoid livelock while handling buffered ioreqs
A malicious or buggy guest may generated buffered ioreqs faster than
QEMU can process them in handle_buffered_iopage(). The result is a
livelock - QEMU continuously processes ioreqs on the main thread without
iterating through the main loop which prevents handling other events,
processing timers, etc. Without QEMU handling other events, it often
results in the guest becoming unsable and makes it difficult to stop the
source of buffered ioreqs.
To avoid this, if we process a full page of buffered ioreqs, stop and
reschedule an immediate timer to continue processing them. This lets
QEMU go back to the main loop and catch up.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20240404140833.1557953-1-ross.lagerwall@citrix.com> Signed-off-by: Anthony PERARD <anthony@xenproject.org>
Marek Marczykowski-Górecki [Wed, 27 Mar 2024 03:05:15 +0000 (04:05 +0100)]
xen: fix stubdom PCI addr
When running in a stubdomain, the config space access via sysfs needs to
use BDF as seen inside stubdomain (connected via xen-pcifront), which is
different from the real BDF. For other purposes (hypercall parameters
etc), the real BDF needs to be used.
Get the in-stubdomain BDF by looking up relevant PV PCI xenstore
entries.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <35049e99da634a74578a1ff2cb3ae4cc436ede33.1711506237.git-series.marmarek@invisiblethingslab.com> Signed-off-by: Anthony PERARD <anthony@xenproject.org>
Marek Marczykowski-Górecki [Wed, 27 Mar 2024 03:05:14 +0000 (04:05 +0100)]
hw/xen: detect when running inside stubdomain
Introduce global xen_is_stubdomain variable when qemu is running inside
a stubdomain instead of dom0. This will be relevant for subsequent
patches, as few things like accessing PCI config space need to be done
differently.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <e66aa97dca5120f22e015c19710b2ff04f525720.1711506237.git-series.marmarek@invisiblethingslab.com> Signed-off-by: Anthony PERARD <anthony@xenproject.org>
Marcin Juszkiewicz [Thu, 20 Jun 2024 10:19:49 +0000 (12:19 +0200)]
tests/avocado: use default amount of cores on sbsa-ref
The version of the sbsa-ref EDK2 firmware we used to use in this test
had a bug where it might make an unaligned access to the framebuffer,
which causes a guest crash on newer versions of QEMU where we enforce
the architectural requirement that unaligned accesses to Device memory
should take an exception.
We happened to not notice this because our test was booting with "-smp
1" and through luck this didn't write the boot logo to the framebuffer
at an unaligned address; but trying to boot the same firmware with two
CPUs would result in a guest crash. Now we have updated the firmware
we're using for the test, we can make the test use all the cores on the
board, so we are testing the SMP boot path.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240620-b4-new-firmware-v3-2-29a3a2f1be1e@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
OvmfPkg/QemuVideoDxe: add feature PCD to remap framebuffer W/C
Some platforms (such as SBSA-QEMU on recent builds of the emulator) only
tolerate misaligned accesses to normal memory, and raise alignment
faults on such accesses to device memory, which is the default for PCIe
MMIO BARs.
When emulating a PCIe graphics controller, the framebuffer is typically
exposed via a MMIO BAR, while the disposition of the region is closer to
memory (no side effects on reads or writes, except for the changing
picture on the screen; direct random access to any pixel in the image).
In order to permit the use of such controllers on platforms that only
tolerate these types of accesses for normal memory, it is necessary to
remap the memory. Use the DXE services to set the desired capabilities
and attributes.
Hide this behavior under a feature PCD so only platforms that really
need it can enable it. (OVMF on x86 has no need for this)
With this fix enabled we can boot sbsa-ref with more than one cpu core.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240620-b4-new-firmware-v3-1-29a3a2f1be1e@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rayhan Faizel [Sun, 19 May 2024 09:41:06 +0000 (15:11 +0530)]
hw/misc: Implement mailbox properties for customer OTP and device specific private keys
Four mailbox properties are implemented as follows:
1. Customer OTP: GET_CUSTOMER_OTP and SET_CUSTOMER_OTP
2. Device-specific private key: GET_PRIVATE_KEY and
SET_PRIVATE_KEY.
The customer OTP is located in the rows 36-43. The device-specific private key
is located in the rows 56-63.
The customer OTP can be locked with the magic numbers 0xffffffff 0xaffe0000
when running the SET_CUSTOMER_OTP mailbox command. Bit 6 of row 32 indicates
this lock, which is undocumented. The lock also applies to the device-specific
private key.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Vladimir Sementsov-Ogievskiy [Thu, 27 Jun 2024 16:25:07 +0000 (19:25 +0300)]
hw/core/loader: gunzip(): fix memory leak on error path
We should call inflateEnd() like on success path to cleanup state in s
variable.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Vladimir Sementsov-Ogievskiy [Wed, 26 Jun 2024 13:43:05 +0000 (16:43 +0300)]
vl.c: select_machine(): add selected machine type to error message
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Vladimir Sementsov-Ogievskiy [Wed, 26 Jun 2024 13:43:04 +0000 (16:43 +0300)]
vl.c: select_machine(): use g_autoptr
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Vladimir Sementsov-Ogievskiy [Wed, 26 Jun 2024 13:43:03 +0000 (16:43 +0300)]
vl.c: select_machine(): use ERRP_GUARD instead of error propagation
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Thomas Huth [Wed, 26 Jun 2024 09:44:06 +0000 (11:44 +0200)]
docs/system/devices/usb: Replace the non-existing "qemu" binary
We don't ship a binary that is simply called "qemu", so we should
avoid this in the documentation. Use the configurable binary name
via "|qemu_system|" instead.
Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Hyeongtak Ji [Wed, 26 Jun 2024 04:34:58 +0000 (13:34 +0900)]
docs/cxl: fix some typos
This patch corrects minor typographical errors to ensure the ASCII art
aligns with the explanations provided. Specifically, it fixes an
incorrect root port reference and removes redundant words.
Signed-off-by: Hyeongtak Ji <hyeongtak.ji@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Darwin uses a subtly different version of the setrlimit() syscall as
described in the COMPATIBILITY section of the macOS man page. The value
of the rlim_cur member has been adjusted accordingly for Darwin-based
systems.
Signed-off-by: Trent Huber <trentmhuber@gmail.com> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Dr. David Alan Gilbert [Sun, 5 May 2024 17:14:44 +0000 (18:14 +0100)]
net/can: Remove unused struct 'CanBusState'
As far as I can tell this struct has never been used in this
file (it is used in can_core.c).
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This struct has been unused since
Commit f932093ae165 ("hw/arm/bcm2836: Split out common part of BCM283X
classes")
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since 'setup_rt_frame' has never been implemented, this struct
is unused.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Philippe Mathieu-Daudé [Mon, 10 Jun 2024 06:39:24 +0000 (08:39 +0200)]
monitor: Remove obsolete stubs
hmp_info_roms() was removed in commit dd98234c05 ("qapi:
introduce x-query-roms QMP command"),
hmp_info_numa() in commit 1b8ae799d8 ("qapi: introduce
x-query-numa QMP command"),
hmp_info_ramblock() in commit ca411b7c8a ("qapi: introduce
x-query-ramblock QMP command")
and hmp_info_irq() in commit 91f2fa7045 ("qapi: introduce
x-query-irq QMP command").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dave@treblig.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Zide Chen [Tue, 4 Jun 2024 00:02:22 +0000 (17:02 -0700)]
target/i386: Advertise MWAIT iff host supports
host_cpu_realizefn() sets CPUID_EXT_MONITOR without consulting host/KVM
capabilities. This may cause problems:
- If MWAIT/MONITOR is not available on the host, advertising this
feature to the guest and executing MWAIT/MONITOR from the guest
triggers #UD and the guest doesn't boot. This is because typically
#UD takes priority over VM-Exit interception checks and KVM doesn't
emulate MONITOR/MWAIT on #UD.
- If KVM doesn't support KVM_X86_DISABLE_EXITS_MWAIT, MWAIT/MONITOR
from the guest are intercepted by KVM, which is not what cpu-pm=on
intends to do.
In these cases, MWAIT/MONITOR should not be exposed to the guest.
The logic in kvm_arch_get_supported_cpuid() to handle CPUID_EXT_MONITOR
is correct and sufficient, and we can't set CPUID_EXT_MONITOR after
x86_cpu_filter_features().
This was not an issue before commit 662175b91ff ("i386: reorder call to
cpu_exec_realizefn") because the feature added in the accel-specific
realizefn could be checked against host availability and filtered out.
Additionally, it seems not a good idea to handle guest CPUID leaves in
host_cpu_realizefn(), and this patch merges host_cpu_enable_cpu_pm()
into kvm_cpu_realizefn().
Fixes: f5cc5a5c1686 ("i386: split cpu accelerators from cpu.c, using AccelCPUClass") Fixes: 662175b91ff2 ("i386: reorder call to cpu_exec_realizefn") Signed-off-by: Zide Chen <zide.chen@intel.com> Reviewed-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Zide Chen [Tue, 4 Jun 2024 00:02:21 +0000 (17:02 -0700)]
vl: Allow multiple -overcommit commands
Both cpu-pm and mem-lock are related to system resource overcommit, but
they are separate from each other, in terms of how they are realized,
and of course, they are applied to different system resources.
It's tempting to use separate command lines to specify their behavior.
e.g., in the following example, the cpu-pm command is quietly
overwritten, and it's not easy to notice it without careful inspection.
--overcommit mem-lock=on
--overcommit cpu-pm=on
Fixes: c8c9dc42b7ca ("Remove the deprecated -realtime option") Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Zide Chen <zide.chen@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since a4c2735f35 (cpu: move Qemu[Thread|Cond] setup into common code,
2024-05-30) these fields are now allocated at cpu_common_initfn(). So
let's make sure we also free them at cpu_common_finalize().
Furthermore, the code also frees these on round robin, but we missed
'halt_cond'.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Martin Joerg [Sat, 15 Jun 2024 11:43:23 +0000 (13:43 +0200)]
hmp-commands-info.hx: Add missing info command for stats subcommand
Signed-off-by: Martin Joerg <martin.joerg@gmail.com> Reviewed-by: Dr. David Alan Gilbert <dave@treblig.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Minwoo Im [Sun, 23 Jun 2024 02:45:55 +0000 (11:45 +0900)]
hw/ufs: Fix potential bugs in MMIO read|write
This patch fixes two points reported in coverity scan report [1]. Check
the MMIO access address with (addr + size), not just with the start offset
addr to make sure that the requested memory access not to exceed the
actual register region. We also updated (uint8_t *) to (uint32_t *) to
represent we are accessing the MMIO registers by dword-sized only.
Cc: Jeuk Kim <jeuk20.kim@gmail.com> Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240623024555.78697-1-minwoo.im.dev@gmail.com> Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
Richard Henderson [Fri, 28 Jun 2024 23:09:38 +0000 (16:09 -0700)]
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* configure: detect --cpu=mipsisa64r6
* target/i386: decode address before going back to translate.c
* meson: allow configuring the x86-64 baseline
* meson: remove dead optimization option
* exec: small changes to allow compilation with C++ in Android emulator
* fix SEV compilation on 32-bit systems
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (23 commits)
target/i386/sev: Fix printf formats
target/i386/sev: Use size_t for object sizes
target/i386: SEV: store pointer to decoded id_auth in SevSnpGuest
target/i386: SEV: rename sev_snp_guest->id_auth
target/i386: SEV: store pointer to decoded id_block in SevSnpGuest
target/i386: SEV: rename sev_snp_guest->id_block
target/i386: remove unused enum
target/i386: give CC_OP_POPCNT low bits corresponding to MO_TL
target/i386: use cpu_cc_dst for CC_OP_POPCNT
target/i386: fix CC_OP dump
include: move typeof_strip_qual to compiler.h, use it in QAPI_LIST_LENGTH()
exec: don't use void* in pointer arithmetic in headers
exec: avoid using C++ keywords in function parameters
block: rename former bdrv_file_open callbacks
block: remove separate bdrv_file_open callback
block: do not check bdrv_file_open
block: make assertion more generic
meson: remove dead optimization option
meson: allow configuring the x86-64 baseline
Revert "host/i386: assume presence of SSE2"
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
projects / users / dwmw2 / qemu.git / log