snd-bcm2835 driver takes the lock with mutex_lock_interruptible() in
all places, which don't make sense. Replace them with the simple
mutex_lock().
Also taking a mutex lock right after creating it for each PCM object
is nonsense, too. It cannot be racy at that point. We can get rid of
it.
Last but not least, initializing chip->audio_mutex at each place is
error-prone. Initialize properly at creating the chip object in
snd_bcm2835_create() instead.
Rob Herring [Wed, 29 Aug 2018 18:34:03 +0000 (13:34 -0500)]
staging: mt7621-pci: remove unnecessary check of device_type == pci
PCI host drivers have already matched on compatible strings, so checking
device_type is redundant. Also, device_type is considered deprecated for
FDT though we've still been requiring it for PCI hosts as it is useful
for finding PCI buses.
Cc: devel@driverdev.osuosl.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Functions port_vlans_add() and port_vlans_del() could,
in theory, return an uninitialized variable. Fix this
by initializing the variable in question at declaration.
John Whitmore [Tue, 28 Aug 2018 18:55:35 +0000 (19:55 +0100)]
staging:rtl8192u: Rename member pDot11dInfo - Style
Rename 'pDot11dInfo', this member variable of the structure
ieee80211_device causes a checkpatch issue, CamelCase naming. The
member has been renamed 'dot11d_info' to clear this issue.
This is a coding style change which should have no impact on runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Tue, 28 Aug 2018 18:55:34 +0000 (19:55 +0100)]
staging:rtl8192u: Refactor member variable enabled - Style
The structure rt_dot11d_info contains a memeber variable 'enabled',
which causes a checkpatch issue as it is declared as being of type
bool. The type of the variable has been changed to a 'u8', to clear
the issue.
Additionally to aid searching for the member variable in code it
has been renamed from 'enabled' to 'dot11d_enabled'.
These are purely coding style changes which should not impact runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Tue, 4 Sep 2018 10:56:23 +0000 (11:56 +0100)]
staging:rtl8192u: Rename dot11d_init to fix name clash
The function dot11d_init() was previously renamed to clear a style
issue. Unfortunately the new name used, dot11d_init(), clashes with
a sybmol which is exported with the same name. To correct this
problem the function has been renamed to rtl8192u_dot11d_init().
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: John Whitmore <johnfwhitmore@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Mon, 27 Aug 2018 18:46:46 +0000 (13:46 -0500)]
staging: rtl8712u: Fix compiler warning about strncpy
When strncpy() is called with source and destination strings the same
length, gcc 8 warns that there may be an unterminated string. Using
strlcpy() rather than strncpy() forces a null at the end and quiets the
warning.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Mon, 27 Aug 2018 18:46:45 +0000 (13:46 -0500)]
staging: rtl8192e: Fix compiler warning from strncpy()
When strncpy() is called with source and destination strings the same
length, gcc 8 warns that there may be an unterminated string. This section
is completely reworked to use the known lengths of the strings.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Zemlyanoy [Thu, 30 Aug 2018 15:14:02 +0000 (18:14 +0300)]
staging: erofs: fix 1 warning and 9 checks
This patch does not change the logic, it only
corrects the formatting and checkpatch checks by
braces {} should be used on all arms of this statement,
unbalanced braces around else statement and warning by
braces {} are not necessary for any arm of this statement.
The patch fixes 9 checks of type:
"Check: braces {} should be used on all arms of this statement";
"Check: Unbalanced braces around else statement";
and 1 warning of type:
"WARNING: braces {} are not necessary for any arm of this statement".
Christian Gromm [Mon, 13 Aug 2018 13:02:29 +0000 (15:02 +0200)]
staging: most: do not make interface dependent attrs default for all channels
The channel attribute dbr_size is only relevant for the DIM2 interface. so
is the packets_per_xact for USB. This patch cleans up the driver's ABI by
not showing all attributes by default for each channel, but only on those
they belong to.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian Gromm [Mon, 13 Aug 2018 13:02:28 +0000 (15:02 +0200)]
staging: most: register channel device after init of struct members
This patch moves the call to device_register to the end of the channel
initialization section that the devcie belongs to. It is needed to
avoid NULL pointer dereferences once the device is registered with
sysfs.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Array iw_operation_mode is defined but is never used hence it is
redundant and can be removed. This array has been like this since
the driver was added back in 2010
Cleans up clang warning:
warning: 'iw_operation_mode' defined but not used [-Wunused-const-variable=]
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
New smatch warnings:
drivers/staging/erofs/internal.h:446 erofs_grab_bio() warn: should 'blkaddr << (12 - 9)' be a 64 bit type?
drivers/staging/erofs/data.c:78 __erofs_get_meta_page() error: 'bio' dereferencing possible ERR_PTR()
drivers/staging/erofs/internal.h:446 erofs_grab_bio() warn: should 'blkaddr << (12 - 9)' be a 64 bit type?
Old smatch warnings:
drivers/staging/erofs/unzip_vle.c:989 z_erofs_vle_unzip() error: double unlock 'mutex:&z_pagemap_global_lock'
drivers/staging/erofs/unzip_vle.c:1318 z_erofs_vle_normalaccess_readpage() warn: should 'page->index << 12' be a 64 bit type?
drivers/staging/erofs/unzip_vle.c:1351 __z_erofs_vle_normalaccess_readpages() warn: should '()->index << 12' be a 64 bit type?
It needs to cast varable's type to sector_t before left shifting.
Gao Xiang [Tue, 21 Aug 2018 14:49:30 +0000 (22:49 +0800)]
staging: erofs: separate erofs_get_meta_page
This patch separates 'erofs_get_meta_page' into 'erofs_get_meta_page'
and 'erofs_get_meta_page_nofail'. The second one ensures that it
should not fail under memory pressure and should make best efforts
if IO errors occur.
It also adds auxiliary variables in order to fulfill 80 character limit.
Pass the gasket driver descriptor to the interrupt init function, rather
than exploding out separate parameters from various fields of that
structure. This allows us to make more localized changes to the types
of interrupts supported (MSIX vs. wire, etc.) without affecting the
calling sequence, and seems nicer for simplification purposes.
Split interrupt handler into PCI MSIX-specific and generic functions,
for adding non-MSIX handlers in the future. Move MSIX init code
together,, out of generic init path.
Some explicit memory barriers in the page table code are not necessary,
either because:
(a) The barrier follows a non-relaxed MMIO access that already performs
a read or write memory barrier.
(b) The barrier follows DMA API calls for which the device-visible
effects of IOMMU programming are guaranteed to be flushed to the IOMMU
prior to the call returning, and doesn't need to sync with normal memory
access.
Todd Poynor [Fri, 10 Aug 2018 03:21:04 +0000 (20:21 -0700)]
staging: gasket: core: switch to relaxed memory-mapped I/O
Use of readl() is deprecated; readl_relaxed() with appropriate memory
barriers is preferred. Switch to relaxed reads and writes for better
performance as well. Memory barriers required for I/O vs. normal
memory access on Apex devices have already been explicitly coded in the
page table routines.
Todd Poynor [Fri, 10 Aug 2018 03:20:59 +0000 (20:20 -0700)]
staging: gasket: core: remove kobj_name param from gasket_alloc_dev
gasket_alloc_dev can retrieve the device name from the parent parameter,
a separate parameter isn't needed for this. Rename the variable to
better reflect its meaning, as the name of the parent device for which a
gasket device is being allocated.
Todd Poynor [Fri, 10 Aug 2018 03:20:57 +0000 (20:20 -0700)]
staging: gasket: core: remove debug log that could crash
A debug log in gasket_alloc_dev() is issued regardless of whether the
device pointer used returned success or error. The log isn't that
useful anyway, remove it.
Sergio Paracuellos [Fri, 10 Aug 2018 16:58:46 +0000 (18:58 +0200)]
staging: mt7621-pci: show N_FTS status using a loop
There are some printk's which can be replaced properly
using dev_* kernel functions. Use dev_info to show
N_FTS status for each port using a loop instead of duplicating
lines of code.
John Whitmore [Sun, 26 Aug 2018 22:45:33 +0000 (23:45 +0100)]
staging:rtl8192u: Add SPDX-License-Identifier tag - Style
Add the missing SPDX-License-Identifier tag to clear the checkpatch
issue. This is a coding style change which should not impact runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the function phy_RF8256_Config_ParaFile() to
phy_rf8256_config_para_file(). This change clears the checkpatch issue
with CamelCase naming.
Additionally as the function is only ever used in one file,
(r8190_rtl8256.c), the function prototype has been removed from the
header file, (r8190_rtl8256.h).
These changes are purely coding style in nature and should have no
impact on runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the function PHY_SetRF8256Bandwidth() to
phy_set_rf8256_bandwidth(). This change clears the checkpatch issue
with CamelCase naming.
The parameter Bandwidth has been renamed to bandwidth, for the
same reason.
Additionally a new line has been added to the parameter list of the
function declaration in r8190_rtl8256.h to truncate the line length
to the checkpatch limit.
These changes are simple coding style changes which should have no
impact on runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the type to baseband_config_type to clear the checkpatch issue
with CamelCase naming. Remove the 'typedef' directive to clear the
issue with defining new types.
As it is only used in the file r819xU_phy.c the type has been moved
to the r819xU_phy.h file.
The enumerated type is only used as a parameter to the function
rtl8192_phyConfigBB. Previously that parameter used type 'u8' so no
compiler typechecking was being performed. The parameter type has been
corrected.
These changes are coding style changes and as such should have no
impact on runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Sun, 26 Aug 2018 21:14:21 +0000 (22:14 +0100)]
staging:rtl8192u: Make function rtl8192_phyConfigBB static
The function rtl8192_phyConfigBB is only used in the file in which it
is defined so can be declared static. Additionally the prototype has
been removed from the header file, as it is not used.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Sun, 26 Aug 2018 21:14:20 +0000 (22:14 +0100)]
staging:rtl8192u: Refactor RT_RF_TYPE_DEF - Style
Rename the enumerated type RT_RF_TYPE_DEF to rt_rf_type to comply
with the coding standard, lower case type names. Removed the 'def'
postscript which provides no additional information.
The 'typedef' directive has been removed to clear the checkpatch issue
with defining new types.
The type has been moved to the file r8192U.h, where it is
actually used by the member variable 'rf_type'. Previously the member
variable used a 'u8' type so no compiler type checking is being
performed. The type has been changed to the correct type.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename enumerated type VERSION_819xU to version_819xu to clear
checkpatch issue with CamelCase naming. Additionally the constants
defined by the type are renamed for the same reason.
Remove the 'typedef' directive to clear the checkpatch issue with
defining new types.
The enumerated type has been moved to the file where the type is
actually used, r8192U.h
Additionally the memeber variable, which uses the type
(card_8192_version), has been changed to use the type to enable
compiler typechecking.
These are coding style changes which should not impact runtime code
execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Tue, 21 Aug 2018 17:15:29 +0000 (18:15 +0100)]
staging:rtl8192u: Refactor union delba_param_set - Style
remove member 'charData' from the union delba_param_set, as it is not
used in code. The remaining member variables have all been renamed to
clear the checkpatch issue with CamelCase naming.
shortData to short_data
Reserved to reserved
Initiator to initiator
TID to tid
These changes are all coding style changes which should have no
impact on runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / users / willy / xarray.git / log