Since commit d1874a0c2805 ("s390/mm: make the pxd_offset functions more
robust") behaviour of p4d_offset, pud_offset and pmd_offset has been
changed so that they cannot be used to iterate through top level page
table, because the index for the top level page table is now calculated
in pgd_offset. To avoid dumping the very first region/segment top level
table entry 2048 times simply iterate entry pointer like it is already
done in other page walking cases.
Fixes: d1874a0c2805 ("s390/mm: make the pxd_offset functions more robust") Reported-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit db9492cef45e ("s390/protvirt: add memory sharing for
diag 308 set/store") which due to ultravisor implementation change is
not needed after all.
When a process creates a new trigger by writing into /proc/pressure/*
files, permissions to write such a file should be used to determine whether
the process is allowed to do so or not. Current implementation would also
require such a process to have setsched capability. Setting of psi trigger
thread's scheduling policy is an implementation detail and should not be
exposed to the user level. Remove the permission check by using _nocheck
version of the function.
PSI defaults to a FIFO-99 thread, reduce this to FIFO-1.
FIFO-99 is the very highest priority available to SCHED_FIFO and
it not a suitable default; it would indicate the psi work is the
most important work on the machine.
Since Real-Time tasks will have pre-allocated memory and locked it in
place, Real-Time tasks do not care about PSI. All it needs is to be
above OTHER.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Tested-by: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
{push,pull}_dl_task() always calls {de,}activate_task() with .flags=0
which sets p->on_rq=TASK_ON_RQ_MIGRATING.
{push,pull}_dl_task()->{de,}activate_task()->{de,en}queue_task()->
{de,en}queue_task_dl() calls {sub,add}_{running,rq}_bw() since
p->on_rq==TASK_ON_RQ_MIGRATING.
So {sub,add}_{running,rq}_bw() in {push,pull}_dl_task() is
double-accounting for that task.
Fix it by removing rq/running bw accounting in [push/pull]_dl_task().
When a reconnect happens in the middle of processing a compound chain
the code leaks a buffer from the memory pool. Fix this by properly
checking for a return code and freeing buffers in case of error.
Also maintain a buf variable to be equal to either smallbuf or bigbuf
depending on a response buffer size while parsing a chain and when
returning to the caller.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In commit fe64ba5c6323 ("drm/rockchip: Resume DP early") we moved
resume to be early but left suspend at its normal time. This seems
like it could be OK, but casues problems if a suspend gets interrupted
partway through. The OS only balances matching suspend/resume levels.
...so if suspend was called then resume will be called. If suspend
late was called then resume early will be called. ...but if suspend
was called resume early might not get called. This leads to an
unbalance in the clock enables / disables.
Lets take the simple fix and just move suspend to be late to match.
This makes the PM core take proper care in keeping things balanced.
Some a4tech mice use the 'GenericDesktop.00b8' usage to inform whether
the previous wheel report was horizontal or vertical. Before c01908a14bf73 ("HID: input: add mapping for "Toggle Display" key") this
usage was being mapped to 'Relative.Misc'. After the patch it's simply
ignored (usage->type == 0 & usage->code == 0). Which ultimately makes
hid-a4tech ignore the WHEEL/HWHEEL selection event, as it has no
usage->type.
We shouldn't rely on a mapping for that usage as it's nonstandard and
doesn't really map to an input event. So we bypass the mapping and make
sure the custom event handling properly handles both reports.
The Saitek X52 joystick has a pair of axes that are originally
(by the Windows driver) used as mouse pointer controls. The corresponding
usage->hid values are 0x50024 and 0x50026. Thus they are handled
as unknown axes and both get mapped to ABS_MISC. The quirk makes
the second axis to be mapped to ABS_MISC1 and thus made available
separately.
[jkosina@suse.cz: squashed two patches into one] Signed-off-by: István Váradi <ivaradi@varadiistvan.hu> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
People are reporing seeing fscache errors being reported concerning
duplicate cookies even in cases where they are not setting up fscache
at all. The rule needs to be that if fscache is not enabled, then it
should have no side effects at all.
To ensure this is the case, we disable fscache completely on all superblocks
for which the 'fsc' mount option was not set. In order to avoid issues
with '-oremount', we also disable the ability to turn fscache on via
remount.
Fixes: f1fe29b4a02d ("NFS: Use i_writecount to control whether...") Link: https://bugzilla.kernel.org/show_bug.cgi?id=200145 Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Steve Dickson <steved@redhat.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
John Hubbard reports seeing the following stack trace:
nfs4_do_reclaim
rcu_read_lock /* we are now in_atomic() and must not sleep */
nfs4_purge_state_owners
nfs4_free_state_owner
nfs4_destroy_seqid_counter
rpc_destroy_wait_queue
cancel_delayed_work_sync
__cancel_work_timer
__flush_work
start_flush_work
might_sleep:
(kernel/workqueue.c:2975: BUG)
The solution is to separate out the freeing of the state owners
from nfs4_purge_state_owners(), and perform that outside the atomic
context.
Reported-by: John Hubbard <jhubbard@nvidia.com> Fixes: 0aaaf5c424c7f ("NFS: Cache state owners after files are closed") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The logic for checking in nfs41_check_open_stateid() whether the state
is supported by a delegation is inverted. In addition, it makes more
sense to perform that check before we check for expired locks.
Fixes: 8a64c4ef106d1 ("NFSv4.1: Even if the stateid is OK,...") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the server returns with EAGAIN when we're trying to recover from
a server reboot, we currently delay for 1 second, but then mark the
stateid as needing recovery after the grace period has expired.
Instead, we should just retry the same recovery process immediately
after the 1 second delay. Break out of the loop after 10 retries.
Fixes: 35a61606a612 ("NFS: Reduce indentation of the switch statement...") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Like FSL_ENETC, when CONFIG_FSL_ENETC_VF is set,
we should select PHYLIB, otherwise building still fails:
drivers/net/ethernet/freescale/enetc/enetc.o: In function `enetc_open':
enetc.c:(.text+0x2744): undefined reference to `phy_start'
enetc.c:(.text+0x282c): undefined reference to `phy_disconnect'
drivers/net/ethernet/freescale/enetc/enetc.o: In function `enetc_close':
enetc.c:(.text+0x28f8): undefined reference to `phy_stop'
enetc.c:(.text+0x2904): undefined reference to `phy_disconnect'
drivers/net/ethernet/freescale/enetc/enetc_ethtool.o:(.rodata+0x3f8): undefined reference to `phy_ethtool_get_link_ksettings'
drivers/net/ethernet/freescale/enetc/enetc_ethtool.o:(.rodata+0x400): undefined reference to `phy_ethtool_set_link_ksettings'
Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
strncpy() does not ensure NULL-termination when the input string
size equals to the destination buffer size 30.
The output string is passed to qed_int_deassertion_aeu_bit()
which calls DP_INFO() and relies NULL-termination.
Use strlcpy instead. The other conditional branch above strncpy()
needs no fix as snprintf() ensures NULL-termination.
This issue is identified by a Coccinelle script.
Signed-off-by: Wang Xiayang <xywang.sjtu@sjtu.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
AMD platform device acp3x_rv_i2s created by parent PCI device
driver. Pass struct device of the parent to
snd_pcm_lib_preallocate_pages() so dma_alloc_coherent() can use
correct dma_ops. Otherwise, it will use default dma_ops which
is nommu_dma_ops on x86_64 even when IOMMU is enabled and
set to non passthrough mode.
strncpy() does not ensure NULL-termination when the input string size
equals to the destination buffer size IFNAMSIZ. The output string is
passed to dev_info() which relies on the NULL-termination.
Use strlcpy() instead.
This issue is identified by a Coccinelle script.
Signed-off-by: Wang Xiayang <xywang.sjtu@sjtu.edu.cn> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
strncpy() does not ensure NULL-termination when the input string size
equals to the destination buffer size IFNAMSIZ. The output string
'name' is passed to dev_info which relies on NULL-termination.
Use strlcpy() instead.
This issue is identified by a Coccinelle script.
Signed-off-by: Wang Xiayang <xywang.sjtu@sjtu.edu.cn> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Juliana Rodrigueiro <juliana.rodrigueiro@intra2net.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
drivers/net/ethernet/freescale/enetc/enetc.o: In function `enetc_open':
enetc.c: undefined reference to `phy_disconnect'
enetc.c: undefined reference to `phy_start'
drivers/net/ethernet/freescale/enetc/enetc.o: In function `enetc_close':
enetc.c: undefined reference to `phy_stop'
enetc.c: undefined reference to `phy_disconnect'
drivers/net/ethernet/freescale/enetc/enetc_ethtool.o: undefined reference to `phy_ethtool_get_link_ksettings'
drivers/net/ethernet/freescale/enetc/enetc_ethtool.o: undefined reference to `phy_ethtool_set_link_ksettings'
drivers/net/ethernet/freescale/enetc/enetc_mdio.o: In function `enetc_mdio_probe':
enetc_mdio.c: undefined reference to `mdiobus_alloc_size'
enetc_mdio.c: undefined reference to `mdiobus_free'
Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The only place where the command was sent as SYNC is during
init and this is not really critical. This change is required
for replacing RS mutex with a spinlock (in the subsequent patch),
since SYNC comamnd requres sleeping and thus the flow cannot
be done when holding a spinlock.
This code clearly never could have worked, since it locks
while already locked. Add an unlocked __iwl_mvm_mac_set_key()
variant that doesn't do locking to fix that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The driver should call iwl_dbg_tlv_free even if debugfs is not defined
since ini mode does not depend on debugfs ifdef.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Fixes: 68f6f492c4fa ("iwlwifi: trans: support loading ini TLVs from external file") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
ini debug mode should work even if debug override is not defined.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Fixes: 68f6f492c4fa ("iwlwifi: trans: support loading ini TLVs from external file") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Rate perform uses the lq_sta table to calculate the next rate to scale
while rate init resets the same table,
Rate perform is done in soft irq context in parallel to rate init
that can be called in case we are doing changes like AP changes BW
or moving state for auth to assoc.
The compatibility "eeprom" attribute is currently root-only no
matter what the configuration says. The "nvmem" attribute does
respect the setting of the root_only configuration bit, so do the
same for "eeprom".
Fix the fact that a notification isn't sent to the recvmsg side to indicate
a call failed when sendmsg() fails to transmit a DATA packet with the error
ENETUNREACH, EHOSTUNREACH or ECONNREFUSED.
Without this notification, the afs client just sits there waiting for the
call to complete in some manner (which it's not now going to do), which
also pins the rxrpc call in place.
This can be seen if the client has a scope-level IPv6 address, but not a
global-level IPv6 address, and we try and transmit an operation to a
server's IPv6 address.
Looking in /proc/net/rxrpc/calls shows completed calls just sat there with
an abort code of RX_USER_ABORT and an error code of -ENETUNREACH.
Fixes: c54e43d752c7 ("rxrpc: Fix missing start of call timeout") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a potential deadlock in rxrpc_peer_keepalive_dispatch() whereby
rxrpc_put_peer() is called with the peer_hash_lock held, but if it reduces
the peer's refcount to 0, rxrpc_put_peer() calls __rxrpc_put_peer() - which
the tries to take the already held lock.
Fix this by providing a version of rxrpc_put_peer() that can be called in
situations where the lock is already held.
The bug may produce the following lockdep report:
============================================
WARNING: possible recursive locking detected
5.2.0-next-20190718 #41 Not tainted
--------------------------------------------
kworker/0:3/21678 is trying to acquire lock: 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: spin_lock_bh
/./include/linux/spinlock.h:343 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at:
__rxrpc_put_peer /net/rxrpc/peer_object.c:415 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at:
rxrpc_put_peer+0x2d3/0x6a0 /net/rxrpc/peer_object.c:435
Shijie Luo reported that when stress-testing ipset with multiple concurrent
create, rename, flush, list, destroy commands, it can result
ipset <version>: Broken LIST kernel message: missing DATA part!
error messages and broken list results. The problem was the rename operation
was not properly handled with respect of listing. The patch fixes the issue.
In commit 8cc4ccf58379 ("ipset: Allow matching on destination MAC address
for mac and ipmac sets"), ipset.git commit 1543514c46a7, I added to the
KADT functions for sets matching on MAC addreses the copy of source or
destination MAC address depending on the configured match.
This was done correctly for hash:mac, but for hash:ip,mac and
bitmap:ip,mac, copying and pasting the same code block presents an
obvious problem: in these two set types, the MAC address is the second
dimension, not the first one, and we are actually selecting the MAC
address depending on whether the first dimension (IP address) specifies
source or destination.
Fix this by checking for the IPSET_DIM_TWO_SRC flag in option flags.
This way, mixing source and destination matches for the two dimensions
of ip,mac set types works as expected. With this setup:
ip netns add A
ip link add veth1 type veth peer name veth2 netns A
ip addr add 192.0.2.1/24 dev veth1
ip -net A addr add 192.0.2.2/24 dev veth2
ip link set veth1 up
ip -net A link set veth2 up
dst=$(ip netns exec A cat /sys/class/net/veth2/address)
ip netns exec A ipset create test_bitmap bitmap:ip,mac range 192.0.0.0/16
ip netns exec A ipset add test_bitmap 192.0.2.1,${dst}
ip netns exec A iptables -A INPUT -m set ! --match-set test_bitmap src,dst -j DROP
ip netns exec A ipset create test_hash hash:ip,mac
ip netns exec A ipset add test_hash 192.0.2.1,${dst}
ip netns exec A iptables -A INPUT -m set ! --match-set test_hash src,dst -j DROP
ipset correctly matches a test packet:
# ping -c1 192.0.2.2 >/dev/null
# echo $?
0
Reported-by: Chen Yi <yiche@redhat.com> Fixes: 8cc4ccf58379 ("ipset: Allow matching on destination MAC address for mac and ipmac sets") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In commit 8cc4ccf58379 ("ipset: Allow matching on destination MAC address
for mac and ipmac sets"), ipset.git commit 1543514c46a7, I removed the
KADT check that prevents matching on destination MAC addresses for
hash:mac sets, but forgot to remove the same check for hash:ip,mac set.
Drop this check: functionality is now commented in man pages and there's
no reason to restrict to source MAC address matching anymore.
Reported-by: Chen Yi <yiche@redhat.com> Fixes: 8cc4ccf58379 ("ipset: Allow matching on destination MAC address for mac and ipmac sets") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit d01f449c008a ("of_net: add NVMEM support to of_get_mac_address")
added support for reading the MAC address from an nvmem-cell. This
required changing the logic to return an error pointer upon failure.
If stmmac is loaded before the nvmem provider driver then
of_get_mac_address() return an error pointer with -EPROBE_DEFER.
Propagate this error so the stmmac driver will be probed again after the
nvmem provider driver is loaded.
Default to a random generated MAC address in case of any other error,
instead of using the error pointer as MAC address.
Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
In hwsim_dump_radio_nl(), when genlmsg_put() on line 3617 fails, hdr is
assigned to NULL. Then hdr is used on lines 3622 and 3623:
genl_dump_check_consistent(cb, hdr);
genlmsg_end(skb, hdr);
Thus, possible null-pointer dereferences may occur.
To fix these bugs, hdr is used here when it is not NULL.
This bug is found by a static analysis tool STCheck written by us.
writeX macros might perform byte-swapping in BE architectures. As our F/W
is in LE format, we need to make sure no byte-swapping will occur.
There is a standard kernel function (called memcpy_toio) for copying data
to I/O area which is used in a lot of drivers to download F/W to PCIe
adapters. That function also makes sure the data is copied "as-is",
without byte-swapping.
This patch use that function to copy the F/W to the GOYA ASIC instead of
writeX macros.
In start_isoc_chain(), usb_alloc_urb() on line 1392 may fail
and return NULL. At this time, fifo->iso[i].urb is assigned to NULL.
Then, fifo->iso[i].urb is used at some places, such as:
LINE 1405: fill_isoc_urb(fifo->iso[i].urb, ...)
urb->number_of_packets = num_packets;
urb->transfer_flags = URB_ISO_ASAP;
urb->actual_length = 0;
urb->interval = interval;
LINE 1416: fifo->iso[i].urb->...
LINE 1419: fifo->iso[i].urb->...
Thus, possible null-pointer dereferences may occur.
To fix these bugs, "continue" is added to avoid using fifo->iso[i].urb
when it is NULL.
These bugs are found by a static analysis tool STCheck written by us.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The hw_ver field was initialized to zero. Return the chip revision.
This is relevant for rdma driver.
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The BroadMobi BM818 M.2 card uses the QMI protocol
Signed-off-by: Bob Ham <bob.ham@puri.sm> Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The slot_width is a property for the bus while the constraint for
SNDRV_PCM_HW_PARAM_SAMPLE_BITS is for the in memory format.
Applying slot_width constraint to sample_bits works most of the time, but
it will blacklist valid formats in some cases.
With slot_width 24 we can support S24_3LE and S24_LE formats as they both
look the same on the bus, but a a 24 constraint on sample_bits would not
allow S24_LE as it is stored in 32bits in memory.
Implement a simple hw_rule function to allow all formats which require less
or equal number of bits on the bus as slot_width (if configured).
explains the issue of the patch.
While device is configured as 1-ch, hardware is still
generating a 2-ch stream.
When user space reads the data and assumes it is a 1-ch stream,
the rate will be slower by 2x.
Revert the change so 1-ch is not supported.
User space can selectively take one channel data out of two channel
if 1-ch is preferred.
Currently, both channels record identical data.
When running McASP as master capture alone will not record any audio unless
a parallel playback stream is running. As soon as the playback stops the
captured data is going to be silent again.
In McASP master mode we need to set the PDIR for the clock pins and fix
the mcasp_set_axr_pdir() to skip the bits in the PDIR registers above
AMUTE.
This went unnoticed as most of the boards uses McASP as slave and neither
of these issues are visible (audible) in those setups.
Fixes: ca3d9433349e ("ASoC: davinci-mcasp: Update PDIR (pin direction) register handling") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20190725083423.7321-1-peter.ujfalusi@ti.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 33d915d9e8ce ("{nl,mac}80211: allow 4addr AP operation on
crypto controlled devices") has introduced a change which allows
4addr operation on crypto controlled devices (ex: ath10k). This
change has inadvertently impacted the interface combinations logic
on such devices.
General rule is that software interfaces like AP/VLAN should not be
listed under supported interface combinations and should not be
considered during validation of these combinations; because of the
aforementioned change, AP/VLAN interfaces(if present) will be checked
against interfaces supported by the device and blocks valid interface
combinations.
Consider a case where an AP and AP/VLAN are up and running; when a
second AP device is brought up on the same physical device, this AP
will be checked against the AP/VLAN interface (which will not be
part of supported interface combinations of the device) and blocks
second AP to come up.
Add a new API cfg80211_iftype_allowed() to fix the problem, this
API works for all devices with/without SW crypto control.
Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Fixes: 33d915d9e8ce ("{nl,mac}80211: allow 4addr AP operation on crypto controlled devices") Link: https://lore.kernel.org/r/1563779690-9716-1-git-send-email-mpubbise@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
devm_kzalloc may fail and return NULL. So the null check is needed.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
devm_kzalloc may fail and return null. So the null check is needed.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Despite a proper NULL-termination after strncpy(..., ..., IFNAMSIZ - 1),
GCC8 still complains about *expected* string truncation:
xsk.c:330:2: error: 'strncpy' output may be truncated copying 15 bytes
from a string of length 15 [-Werror=stringop-truncation]
strncpy(ifr.ifr_name, xsk->ifname, IFNAMSIZ - 1);
This patch gets rid of the issue altogether by using memcpy instead.
There is no performance regression, as strncpy will still copy and fill
all of the bytes anyway.
v1->v2:
- rebase against bpf tree.
Cc: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit c440eee1a7a1 ("Staging: fbtft: Switch to the gpio descriptor
interface") breaks GPIO handling. In several places, checks to only set
a GPIO if it was configured ended up backwards.
I have tested this fix. The fixed driver works with a ili9486
display connected to a raspberry pi via SPI.
Fixes: c440eee1a7a1d ("Staging: fbtft: Switch to the gpio descriptor interface") Tested-by: Jan Sebastian Götte <linux@jaseg.net> Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Jan Sebastian Götte <linux@jaseg.net> Link: https://lore.kernel.org/r/75ada52f-afa1-08bc-d0ce-966fc1110e70@jaseg.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the DAI format setup fails, there is no valid communication format
between CPU and CODEC, so fail card instantiation, rather than continue
with a card that will most likely not function properly.
add error check when workqueue alloc failed, and remove redundant code
to make it clear.
Fixes: e0000163e30e ("can: Driver for the Microchip MCP251x SPI CAN controllers") Signed-off-by: Weitao Hou <houweitaoo@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Tested-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
CONFIG_CAN_LEDS is deprecated. When trying to use the generic netdev
trigger as suggested, there's a small inconsistency with the link
property: The LED is on initially, stays on when the device is brought
up, and then turns off (as expected) when the device is brought down.
Make sure the LED always reflects the state of the CAN device.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
'channels.max_combined' initialized only on ioctl success and
errno is only valid on ioctl failure.
The code doesn't produce any runtime issues, but makes memory
sanitizers angry:
Conditional jump or move depends on uninitialised value(s)
at 0x55C056F: xsk_get_max_queues (xsk.c:336)
by 0x55C05B2: xsk_create_bpf_maps (xsk.c:354)
by 0x55C089F: xsk_setup_xdp_prog (xsk.c:447)
by 0x55C0E57: xsk_socket__create (xsk.c:601)
Uninitialised value was created by a stack allocation
at 0x55C04CD: xsk_get_max_queues (xsk.c:318)
Additionally fixed warning on uninitialized bytes in ioctl arguments:
Syscall param ioctl(SIOCETHTOOL) points to uninitialised byte(s)
at 0x648D45B: ioctl (in /usr/lib64/libc-2.28.so)
by 0x55C0546: xsk_get_max_queues (xsk.c:330)
by 0x55C05B2: xsk_create_bpf_maps (xsk.c:354)
by 0x55C089F: xsk_setup_xdp_prog (xsk.c:447)
by 0x55C0E57: xsk_socket__create (xsk.c:601)
Address 0x1ffefff378 is on thread 1's stack
in frame #1, created by xsk_get_max_queues (xsk.c:318)
Uninitialised value was created by a stack allocation
at 0x55C04CD: xsk_get_max_queues (xsk.c:318)
CC: Magnus Karlsson <magnus.karlsson@intel.com> Fixes: 1cad07884239 ("libbpf: add support for using AF_XDP sockets") Signed-off-by: Ilya Maximets <i.maximets@samsung.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The TC filters used in the test do not work with veth devices because the
outer Ethertype is 802.1Q and not IPv4. The test passes with mlxsw
netdevs since the hardware always looks at "The first Ethertype that
does not point to either: VLAN, CNTAG or configurable Ethertype".
Fix this by matching on the VLAN ID instead, but on the ingress side.
The reason why this is not performed at egress is explained in the
commit cited below.
Fixes: 541ad323db3a ("selftests: forwarding: gre_multipath: Update next-hop statistics match criteria") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Stephen Suryaputra <ssuryaextr@gmail.com> Tested-by: Stephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The test did not enable IPv4 forwarding during its setup phase, which
causes the test to fail on machines where IPv4 forwarding is disabled.
Fixes: 54818c4c4b93 ("selftests: forwarding: Test multipath tunneling") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Stephen Suryaputra <ssuryaextr@gmail.com> Tested-by: Stephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
PPv2's XLGMAC can wait for 3 idle frames before triggering a link up
event. This can cause the link to be stuck low when there's traffic on
the interface, so disable this feature.
Fixes: 4bb043262878 ("net: mvpp2: phylink support") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The following scenario was encountered during testing of logical
partition mobility on pseries partitions with bonded ibmvnic
adapters in LACP mode.
1. Driver receives a signal that the device has been
swapped, and it needs to reset to initialize the new
device.
2. Driver reports loss of carrier and begins initialization.
3. Bonding driver receives NETDEV_CHANGE notifier and checks
the slave's current speed and duplex settings. Because these
are unknown at the time, the bond sets its link state to
BOND_LINK_FAIL and handles the speed update, clearing
AD_PORT_LACP_ENABLE.
4. Driver finishes recovery and reports that the carrier is on.
5. Bond receives a new notification and checks the speed again.
The speeds are valid but miimon has not altered the link
state yet. AD_PORT_LACP_ENABLE remains off.
Because the slave's link state is still BOND_LINK_FAIL,
no further port checks are made when it recovers. Though
the slave devices are operational and have valid speed
and duplex settings, the bond will not send LACPDU's. The
simplest fix I can see is to force another speed check
in bond_miimon_commit. This way the bond will update
AD_PORT_LACP_ENABLE if needed when transitioning from
BOND_LINK_FAIL to BOND_LINK_UP.
CC: Jarod Wilson <jarod@redhat.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
In snd_soc_dapm_new_control_unlocked(), a kernel buffer is allocated in
dapm_cnew_widget() to hold the new dapm widget. Then, different actions are
taken according to the id of the widget, i.e., 'w->id'. If any failure
occurs during this process, snd_soc_dapm_new_control_unlocked() should be
terminated by going to the 'request_failed' label. However, the allocated
kernel buffer is not freed on this code path, leading to a memory leak bug.
To fix the above issue, free the buffer before returning from
snd_soc_dapm_new_control_unlocked() through the 'request_failed' label.
"sendmsg6: rewrite IP & port (C)" fails on s390, because the code in
sendmsg_v6_prog() assumes that (ctx->user_ip6[0] & 0xFFFF) refers to
leading IPv6 address digits, which is not the case on big-endian
machines.
Since checking bitwise operations doesn't seem to be the point of the
test, replace two short comparisons with a single int comparison.
Sockmap does not currently support adding sockets after TLS has been
enabled. There never was a real use case for this so it was never
added. But, we lost the test for ULP at some point so add it here
and fail the socket insert if TLS is enabled. Future work could
make sockmap support this use case but fixup the bug here.
Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
We need to have a synchronize_rcu before free'ing the sockmap because
any outstanding psock references will have a pointer to the map and
when they use this could trigger a use after free.
Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Don't undo the PM initialization if we error out before we managed to
initialize it. The call to pm_runtime_disable() without being preceded
by pm_runtime_enable() would disturb the balance of the Force.
In practice, this happens if we fail to allocate any of the GPIOS ("cs",
"ready") due to -EPROBE_DEFER because we're getting probled before the
GPIO driver.
When CONFIG_UAPI_HEADER_TEST=y, exported headers are compile-tested to
make sure they can be included from user-space.
Currently, header.h and fw.h are excluded from the test coverage.
To make them join the compile-test, we need to fix the build errors
attached below.
For a case like this, we decided to use __u{8,16,32,64} variable types
in this discussion:
https://lkml.org/lkml/2019/6/5/18
Build log:
CC usr/include/sound/sof/header.h.s
CC usr/include/sound/sof/fw.h.s
In file included from <command-line>:32:0:
./usr/include/sound/sof/header.h:19:2: error: unknown type name ‘uint32_t’
uint32_t magic; /**< 'S', 'O', 'F', '\0' */
^~~~~~~~
./usr/include/sound/sof/header.h:20:2: error: unknown type name ‘uint32_t’
uint32_t type; /**< component specific type */
^~~~~~~~
./usr/include/sound/sof/header.h:21:2: error: unknown type name ‘uint32_t’
uint32_t size; /**< size in bytes of data excl. this struct */
^~~~~~~~
./usr/include/sound/sof/header.h:22:2: error: unknown type name ‘uint32_t’
uint32_t abi; /**< SOF ABI version */
^~~~~~~~
./usr/include/sound/sof/header.h:23:2: error: unknown type name ‘uint32_t’
uint32_t reserved[4]; /**< reserved for future use */
^~~~~~~~
./usr/include/sound/sof/header.h:24:2: error: unknown type name ‘uint32_t’
uint32_t data[0]; /**< Component data - opaque to core */
^~~~~~~~
In file included from <command-line>:32:0:
./usr/include/sound/sof/fw.h:49:2: error: unknown type name ‘uint32_t’
uint32_t size; /* bytes minus this header */
^~~~~~~~
./usr/include/sound/sof/fw.h:50:2: error: unknown type name ‘uint32_t’
uint32_t offset; /* offset from base */
^~~~~~~~
./usr/include/sound/sof/fw.h:64:2: error: unknown type name ‘uint32_t’
uint32_t size; /* bytes minus this header */
^~~~~~~~
./usr/include/sound/sof/fw.h:65:2: error: unknown type name ‘uint32_t’
uint32_t num_blocks; /* number of blocks */
^~~~~~~~
./usr/include/sound/sof/fw.h:73:2: error: unknown type name ‘uint32_t’
uint32_t file_size; /* size of file minus this header */
^~~~~~~~
./usr/include/sound/sof/fw.h:74:2: error: unknown type name ‘uint32_t’
uint32_t num_modules; /* number of modules */
^~~~~~~~
./usr/include/sound/sof/fw.h:75:2: error: unknown type name ‘uint32_t’
uint32_t abi; /* version of header format */
^~~~~~~~
DPCM uses snd_soc_dapm_dai_get_connected_widgets to build a
list of the widgets connected to a specific front end DAI so it
can search through this list for available back end DAIs. The
custom_stop_condition was added to is_connected_ep to facilitate this
list not containing more widgets than is necessary. Doing so both
speeds up the DPCM handling as less widgets need to be searched and
avoids issues with CODEC to CODEC links as these would be confused
with back end DAIs if they appeared in the list of available widgets.
custom_stop_condition was implemented by aborting the graph walk
when the condition is triggered, however there is an issue with this
approach. Whilst walking the graph is_connected_ep should update the
endpoints cache on each widget, if the walk is aborted the number
of attached end points is unknown for that sub-graph. When the stop
condition triggered, the original patch ignored the triggering widget
and returned zero connected end points; a later patch updated this
to set the triggering widget's cache to 1 and return that. Both of
these approaches result in inaccurate values being stored in various
end point caches as the values propagate back through the graph,
which can result in later issues with widgets powering/not powering
unexpectedly.
As the original goal was to reduce the size of the widget list passed
to the DPCM code, the simplest solution is to limit the functionality
of the custom_stop_condition to the widget list. This means the rest
of the graph will still be processed resulting in correct end point
caches, but only widgets up to the stop condition will be added to the
returned widget list.
Fixes: 6742064aef7f ("ASoC: dapm: support user-defined stop condition in dai_get_connected_widgets") Fixes: 5fdd022c2026 ("ASoC: dpcm: play nice with CODEC<->CODEC links") Fixes: 09464974eaa8 ("ASoC: dapm: Fix to return correct path list in is_connected_ep.") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20190718084333.15598-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In compat_do_replace(), a temporary buffer is allocated through vmalloc()
to hold entries copied from the user space. The buffer address is firstly
saved to 'newinfo->entries', and later on assigned to 'entries_tmp'. Then
the entries in this temporary buffer is copied to the internal kernel
structure through compat_copy_entries(). If this copy process fails,
compat_do_replace() should be terminated. However, the allocated temporary
buffer is not freed on this path, leading to a memory leak.
To fix the bug, free the buffer before returning from compat_do_replace().
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If VAR in non-sanitized BTF was size less than 4, converting such VAR
into an INT with size=4 will cause BTF validation failure due to
violationg of STRUCT (into which DATASEC was converted) member size.
Fix by conservatively using size=1.
Because CONFIG_OF defined for MIPS, cacheinfo attempts to fill information
from DT, ignoring data filled by architecture routine. This leads to error
reported
cacheinfo: Unable to detect cache hierarchy for CPU 0
Way to fix this provided in
commit fac51482577d ("drivers: base: cacheinfo: fix x86 with
CONFIG_OF enabled")
Utilize same mechanism to report that cacheinfo set by architecture
specific function
Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@linux.intel.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
Enable force feedback for the Thrustmaster Dual Trigger 2 in 1 Rumble Force
gamepad. Compared to other Thrustmaster devices, left and right rumble
motors here are swapped.
The Irbis NB41 netbook has its internal mic on IN2, inverted jack-detect
and stereo speakers, add a quirk for this.
Cc: russianneuromancer@ya.ru Reported-and-tested-by: russianneuromancer@ya.ru Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20190712112708.25327-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Refactoring of axp20x driver introduced a bug in AXP803's DCDC6
regulator definition. AXP803_DCDC6_1120mV_STEPS was obtained by
subtracting 0x47 and 0x33. This should be 0x14 (hex) and not 14
(dec).
Refactoring also carried over a bug in DCDC5 regulator definition.
Number of possible voltages must be for 1 bigger than maximum valid
voltage index, because 0 is also valid and it means lowest voltage.
Fixes: 1dbe0ccb0631 ("regulator: axp20x-regulator: add support for AXP803") Fixes: db4a555f7c4c ("regulator: axp20x: use defines for masks") Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://lore.kernel.org/r/20190713090717.347-3-jernej.skrabec@siol.net Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Refactoring of the driver introduced bugs in AXP806's DCDCA and DCDCD
regulator definitions.
In DCDCA case, AXP806_DCDCA_1120mV_STEPS was obtained by subtracting
0x47 and 0x33. This should be 0x14 (hex) and not 14 (dec).
In DCDCD case, axp806_dcdcd_ranges[] contains two ranges with same
start and end macros, which is clearly wrong. Second range starts at
1.6V so it should use AXP806_DCDCD_1600mV_[START|END] macros. They are
already defined but unused.
Fixes: db4a555f7c4c ("regulator: axp20x: use defines for masks") Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://lore.kernel.org/r/20190713090717.347-2-jernej.skrabec@siol.net Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c152f8491a8d9 ("ASoC: audio-graph-card: fix an use-after-free in
graph_get_dai_id()") fixups use-after-free issue,
but, it need to use "const" for reg. This patch adds it.
We will have below without this patch
LINUX/sound/soc/generic/audio-graph-card.c: In function 'graph_get_dai_id':
LINUX/sound/soc/generic/audio-graph-card.c:87:7: warning: assignment discards\
'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
reg = of_get_property(node, "reg", NULL);
Fixes: c152f8491a8d9 ("ASoC: audio-graph-card: fix an use-after-free in graph_get_dai_id()") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Wen Yang <wen.yang99@zte.com.cn> Link: https://lore.kernel.org/r/87sgrd43ja.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
After calling of_node_put() on the node variable, it is still being
used, which may result in use-after-free.
Fix this issue by calling of_node_put() after the last usage.
Fixes: a0c426fe1433 ("ASoC: simple-card-utils: check "reg" property on asoc_simple_card_get_dai_id()") Link: https://lore.kernel.org/r/1562743509-30496-5-git-send-email-wen.yang99@zte.com.cn Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
After calling of_node_put() on the ports, port, and node variables,
they are still being used, which may result in use-after-free.
Fix this issue by calling of_node_put() after the last usage.
Fixes: dd98fbc558a0 ("ASoC: audio-graph-card: cleanup DAI link loop method - step1") Link: https://lore.kernel.org/r/1562743509-30496-4-git-send-email-wen.yang99@zte.com.cn Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The root cause is nlmsg_parse calling __nla_parse which means the
header struct size is not checked.
nlmsg_parse should be a wrapper around __nlmsg_parse with
NL_VALIDATE_STRICT for the validate argument very much like
nlmsg_parse_deprecated is for NL_VALIDATE_LIBERAL.
Fixes: 3de6440354465 ("netlink: re-add parse/validate functions in strict mode") Reported-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After configuring and restarting aneg we immediately try to read the
link status. On some systems the PHY may not yet have cleared the
"aneg complete" and "link up" bits, resulting in a false link-up
signal. See [0] for a report.
Clause 22 and 45 both require the PHY to keep the AN_RESTART
bit set until the PHY actually starts auto-negotiation.
Let's consider this in the generic functions for reading link status.
The commit marked as fixed is the first one where the patch applies
cleanly.
Fixes: c1164bb1a631 ("net: phy: check PMAPMD link status only in genphy_c45_read_link") Tested-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sk_validate_xmit_skb() and drivers depend on the sk member of
struct sk_buff to identify segments requiring encryption.
Any operation which removes or does not preserve the original TLS
socket such as skb_orphan() or skb_clone() will cause clear text
leaks.
Make the TCP socket underlying an offloaded TLS connection
mark all skbs as decrypted, if TLS TX is in offload mode.
Then in sk_validate_xmit_skb() catch skbs which have no socket
(or a socket with no validation) and decrypted flag set.
Note that CONFIG_SOCK_VALIDATE_XMIT, CONFIG_TLS_DEVICE and
sk->sk_validate_xmit_skb are slightly interchangeable right now,
they all imply TLS offload. The new checks are guarded by
CONFIG_TLS_DEVICE because that's the option guarding the
sk_buff->decrypted member.
Second, smaller issue with orphaning is that it breaks
the guarantee that packets will be delivered to device
queues in-order. All TLS offload drivers depend on that
scheduling property. This means skb_orphan_partial()'s
trick of preserving partial socket references will cause
issues in the drivers. We need a full orphan, and as a
result netem delay/throttling will cause all TLS offload
skbs to be dropped.
Reusing the sk_buff->decrypted flag also protects from
leaking clear text when incoming, decrypted skb is redirected
(e.g. by TC).
See commit 0608c69c9a80 ("bpf: sk_msg, sock{map|hash} redirect
through ULP") for justification why the internal flag is safe.
The only location which could leak the flag in is tcp_bpf_sendmsg(),
which is taken care of by clearing the previously unused bit.
v2:
- remove superfluous decrypted mark copy (Willem);
- remove the stale doc entry (Boris);
- rely entirely on EOR marking to prevent coalescing (Boris);
- use an internal sendpages flag instead of marking the socket
(Boris).
v3 (Willem):
- reorganize the can_skb_orphan_partial() condition;
- fix the flag leak-in through tcp_bpf_sendmsg.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current ARFS code relies on certain fields to be set in the SKB
(e.g. transport_header) and extracts IP addresses and ports by custom
code that parses the packet. The necessary SKB fields, however, are not
always set at that point, which leads to an out-of-bounds access. Use
skb_flow_dissect_flow_keys() to get the necessary information reliably,
fix the out-of-bounds access and reuse the code.
Remove check of recovery bit, in the beginning of the CQE recovery
function. This test is already performed right before the reporter
is invoked, when CQE error is detected.
Remove wrong error return value when SQ is not in error state.
CQE recovery on TX reporter queries the sq state. If the sq is not in
error state, the sq is either in ready or reset state. Ready state is
good state which doesn't require recovery and reset state is a temporal
state which ends in ready state. With this patch, CQE recovery in this
scenario is successful.
Prior to the commit in the fixes tag, the resource controller in netdevsim
tracked fib entries and rules per network namespace. Restore that behavior.
Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update TDC tests with cases varifying ability of TC to install or delete
batches of skbedit actions.
Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add get_fill_size() routine used to calculate the action size
when building a batch of events.
Fixes: ca9b0e27e ("pkt_action: add new action skbedit") Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
FW expects the driver to provide unique flow reference handles
for Tx or Rx flows. When a Tx flow and an Rx flow end up sharing
a reference handle, flow offload does not seem to work.
This could happen in the case of 2 flows having their L2 fields
wildcarded but in different direction.
Fix to incorporate the flow direction as part of the L2 key
v2: Move the dir field to the end of the bnxt_tc_l2_key struct to
fix the warning reported by kbuild test robot <lkp@intel.com>.
There is existing code that initializes the structure using
nested initializer and will warn with the new u8 field added to
the beginning. The structure also packs nicer when this new u8 is
added to the end of the structure [MChan].
Fixes: abd43a13525d ("bnxt_en: Support for 64-bit flow handle.") Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Direction of the flow is determined using src_fid. For an RX flow,
src_fid is PF's fid and for TX flow, src_fid is VF's fid. Direction
of the flow must be specified, when getting statistics for that flow.
Currently, for DECAP flow, direction is determined incorrectly, i.e.,
direction is initialized as TX for DECAP flow, instead of RX. Because
of which, stats are not reported for this DECAP flow, though it is
offloaded and there is traffic for that flow, resulting in flow age out.
This patch fixes the problem by determining the DECAP flow's direction
using correct fid. Set the flow direction in all cases for consistency
even if 64-bit flow handle is not used.
Fixes: abd43a13525d ("bnxt_en: Support for 64-bit flow handle.") Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For newly added NVM parameters, older firmware may not have the support.
Suppress the error message to avoid the unncessary error message which is
triggered when devlink calls the driver during initialization.
Fixes: 782a624d00fa ("bnxt_en: Add bnxt_en initial params table and register it.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / users / dwmw2 / linux.git / log