Christoph Niedermaier [Mon, 2 Aug 2021 14:10:38 +0000 (16:10 +0200)]
ARM: dts: imx6qdl-dhcom: Add DHSOM based DRC02 board
Add DT for DH DRC02 unit, which is a universal controller device.
The system has two ethernet ports, two CANs, RS485 and RS232, USB,
capacitive buttons and an OLED display.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Christoph Niedermaier [Mon, 2 Aug 2021 14:10:37 +0000 (16:10 +0200)]
ARM: dts: imx6qdl-dhcom: Add DHCOM based PicoITX board
Add DT for DH PicoITX unit, which is a bare-bones carrier board for
the DHCOM. The board has ethernet port, USB, CAN, LEDs and a custom
board-to-board expansion connector.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Christoph Niedermaier [Mon, 2 Aug 2021 14:10:36 +0000 (16:10 +0200)]
ARM: dts: imx6qdl-dhcom: Split SoC-independent parts of DHCOM SOM and PDK2
The DH electronics PDK2 can be populated with SoM with i.MX6S/DL/D/Q
variants. Split the SoC-independent parts of the SoM and PDK2 into the
imx6qdl-dhcom-*.dtsi and reduce imx6q-dhcom-pdk2.dts to example of
adding i.MX6S/DL/D/Q variants of the SoM into a PDK2 carrier board.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Christoph Niedermaier [Mon, 2 Aug 2021 14:10:35 +0000 (16:10 +0200)]
ARM: dts: imx6q-dhcom: Cleanup of the devicetrees
Following cleanups of the devicetrees done, no change in function:
- Remove parentheses from the license
- Update copyright date
- Alphabetical sorting
- Add comments
- Update pinctrl names
- Hex values in lower case
- Set 3rd values of fixed regulators gpio property to 0
- Replace interrupt type with a define
- Remove superfluous property max-speed from the fec node
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Christoph Niedermaier [Mon, 2 Aug 2021 14:10:33 +0000 (16:10 +0200)]
ARM: dts: imx6q-dhcom: Rework of the DHCOM GPIO pinctrls
The function of each SoM pins is defined in the DHCOM standard [1] and
subset of them is defined as GPIOs (pins A-W). To ensure the interchange-
ability of the DHCOM SoMs, the function of the pins are fixed and cannot
be changed. On board level the DHCOM GPIOs can be used associated with
different blocks e.g. for interrupt or reset, but the function is always
GPIO. If not used, they can be freely used in the user space.
Therefore the whole configuration of SoM pins is made in the SoM DT.
Defining the DHCOM GPIO pins as a separate pinctrl nodes makes moving a
subset of them to an appropriate block pinctrl group easier on board level,
since it is not necessary to have a large pinctrl hog group containing
unrelated pinmux entries on board level. This also makes it easy to update
the SoM DT without having to update all the board DTs too. If necessary it
is also possible to change the electrical properties of the DHCOM GPIOs by
overwriting the pinctrl on board level.
Christoph Niedermaier [Mon, 2 Aug 2021 14:10:32 +0000 (16:10 +0200)]
ARM: dts: imx6q-dhcom: Use 1G ethernet on the PDK2 board
The PDK2 board is capable of running both 100M and 1G ethernet. However,
the i.MX6 has only one ethernet MAC, so it is possible to configure
either 100M or 1G Ethernet. In case of 100M option, the PHY is on the
SoM and the signals are routed to a RJ45 port. For 1G the PHY is on
the PDK2 board with another RJ45 port. 100M and 1G ethernet use
different signal pins from the i.MX6, but share the MDIO bus.
This SoM board combination is used to demonstrate how to enable 1G
ethernet configuration.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Tim Harvey [Fri, 23 Jul 2021 18:41:15 +0000 (11:41 -0700)]
dt-bindings: arm: imx: add imx8mm/imx8mn GW7902 support
The GW7902 is based on the i.MX 8M Mini / Nano SoC featuring:
- LPDDR4 DRAM
- eMMC FLASH
- Gateworks System Controller
- LTE CAT M1 modem
- USB 2.0 HUB
- M.2 Socket with USB2.0, PCIe, and dual-SIM
- IMX8M FEC
- PCIe based GbE
- RS232/RS485/RS422 serial transceiver
- GPS
- CAN bus
- WiFi / Bluetooth
- MIPI header (DSI/CSI/GPIO/PWM/I2S)
- PMIC
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The pinctrl_power_button/pinctrl_power_out each define single GPIO
pinmux, except it is exactly the other one than the matching gpio-keys
and gpio-poweroff DT nodes use for that functionality. Swap the two
GPIOs to correct this error.
Fixes: 50d29fdb765d ("ARM: dts: imx53: Add power GPIOs on M53Menlo") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Colin Ian King [Thu, 15 Jul 2021 13:23:21 +0000 (14:23 +0100)]
ARM: imx: fix missing 3rd argument in macro imx_mmdc_perf_init
The function imx_mmdc_perf_init recently had a 3rd argument added to
it but the equivalent macro was not updated and is still the older
2 argument version. Fix this by adding in the missing 3rd argumement
mmdc_ipg_clk.
Fixes: f07ec8536580 ("ARM: imx: add missing clk_disable_unprepare()") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Christoph Niedermaier [Wed, 14 Jul 2021 21:07:08 +0000 (23:07 +0200)]
ARM: dts: imx6q-dhcom: Set minimum memory size of all DHCOM i.MX6 variants
The minimum available memory size of all DHCOM i.MX6 variants is 512 MB.
Set this value for the memory node. If U-Boot fails to fill the memory
size, at least all DHCOM i.MX6 variants should run without problems.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Christoph Niedermaier [Wed, 14 Jul 2021 21:07:04 +0000 (23:07 +0200)]
ARM: dts: imx6q-dhcom: Add keys and leds to the PDK2 board
On the PDK2 there are 4 keys and 4 leds. DHCOM GPIOs are
used for that, but one led isn't useable, because the GPIO
is already used as touch interrupt.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Christoph Niedermaier [Wed, 14 Jul 2021 21:07:01 +0000 (23:07 +0200)]
ARM: dts: imx6q-dhcom: Fill GPIO line names on DHCOM SoM
Fill in the custom GPIO line names used by DH on the DHCOM SoM.
The GPIO line names are in accordance to DHCOM Design Guide R04
available at [1], section 3.9 GPIO. Adding also GPIO line names
for the hardware and memory coding.
Christoph Niedermaier [Wed, 14 Jul 2021 21:07:00 +0000 (23:07 +0200)]
ARM: dts: imx6q-dhcom: Add interrupt and compatible to the ethernet PHY
Enable the interrupt mode for the ethernet PHY by adding the
necessary property and a separate pinctrl for the PHY. Also
add the compatible property for it.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Christoph Niedermaier [Wed, 14 Jul 2021 21:06:59 +0000 (23:06 +0200)]
ARM: dts: imx6q-dhcom: Add the parallel system bus
Add the parallel system bus provided by the i.MX6 WEIM interface via an
address latch. The OE pin of the latch is controlled by a fixed regulator.
The pin is low active. This is ensured by omitting the regulators property
enable-active-high. The flags value of the gpio property (3rd value), which
is also use to define active high/low, is set to 0 because it is ignored
by gpiolib-of.c.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Christoph Niedermaier [Wed, 14 Jul 2021 20:22:52 +0000 (22:22 +0200)]
dt-bindings: arm: fsl: Add DHCOM PicoITX and DHCOM DRC02 boards
Add DH electronics DHCOM PicoITX and DHCOM DRC02 boards. The DHCOM DRC02
device can only house a SOM with iMX6S and not with iMX6DL, due to some
thermal design consideration. But for compatible fsl,imx6dl is chosen,
because fsl,imx6s isn't available, the iMX6S is basically a iMX6DL with
one CPU core disabled and therefore the kernel discerns the iMX6S/iMX6DL
automatically.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: robh+dt@kernel.org Cc: Shawn Guo <shawnguo@kernel.org> Cc: kernel@dh-electronics.com Cc: Fabio Estevam <festevam@denx.de>
To: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Robin Gong [Wed, 14 Jul 2021 10:20:52 +0000 (18:20 +0800)]
dmaengine: imx-sdma: add terminated list for freed descriptor in worker
Add terminated list for keeping descriptor so that it could be freed in
worker without any potential involving next descriptor raised up before
this descriptor freed, because vchan_get_all_descriptors get all
descriptors including the last terminated descriptor and the next
descriptor, hence, the next descriptor maybe freed unexpectly when it's
done in worker without this patch.
https://www.spinics.net/lists/dmaengine/msg23367.html
Signed-off-by: Robin Gong <yibin.gong@nxp.com> Reported-by: Richard Leitner <richard.leitner@skidata.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Robin Gong [Wed, 14 Jul 2021 10:20:51 +0000 (18:20 +0800)]
dmaengine: imx-sdma: add uart rom script
For the compatibility of NXP internal legacy kernel before 4.19 which
is based on uart ram script and upstreaming kernel based on uart rom
script, add both uart ram/rom script in latest sdma firmware. By default
uart rom script used.
Besides, add two multi-fifo scripts for SAI/PDM on i.mx8m/8mm and add
back qspi script miss for v4(i.mx7d/8m/8mm family, but v3 is for i.mx6).
rom script:
uart_2_mcu_addr
uartsh_2_mcu_addr /* through spba bus */
am script:
uart_2_mcu_ram_addr
uartsh_2_mcu_ram_addr /* through spba bus */
Please get latest sdma firmware from the below and put them into the path
(/lib/firmware/imx/sdma/):
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
/tree/imx/sdma
Signed-off-by: Robin Gong <yibin.gong@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Robin Gong [Wed, 14 Jul 2021 10:20:48 +0000 (18:20 +0800)]
spi: imx: remove ERR009165 workaround on i.mx6ul
ERR009165 fixed on i.mx6ul/6ull/6sll. All other i.mx6/7 and
i.mx8m/8mm still need this errata. Please refer to nxp official
errata document from https://www.nxp.com/ .
For removing workaround on those chips. Add new i.mx6ul type.
Signed-off-by: Robin Gong <yibin.gong@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Robin Gong [Wed, 14 Jul 2021 10:20:47 +0000 (18:20 +0800)]
spi: imx: fix ERR009165
Change to XCH mode even in dma mode, please refer to the below
errata:
https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
Signed-off-by: Robin Gong <yibin.gong@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Robin Gong [Wed, 14 Jul 2021 10:20:45 +0000 (18:20 +0800)]
dmaengine: dma: imx-sdma: add fw_loaded and is_ram_script
Add 'fw_loaded' and 'is_ram_script' to check if the script used by channel
is ram script and it's loaded or not, so that could prevent meaningless
following malloc dma descriptor and bd allocate in sdma_transfer_init(),
otherwise memory may be consumed out potentially without free in case
that spi fallback into pio while dma transfer failed by sdma firmware not
ready(next ERR009165 patch depends on sdma RAM scripts/firmware).
Signed-off-by: Robin Gong <yibin.gong@nxp.com> Acked-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Robin Gong [Wed, 14 Jul 2021 10:20:42 +0000 (18:20 +0800)]
Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
There are two ways for SDMA accessing SPBA devices: one is SDMA->AIPS
->SPBA(masterA port), another is SDMA->SPBA(masterC port). Please refer
to the 'Figure 58-1. i.MX 6Dual/6Quad SPBA connectivity' of i.mx6DQ
Reference Manual. SDMA provide the corresponding app_2_mcu/mcu_2_app and
shp_2_mcu/mcu_2_shp script for such two options. So both AIPS and SPBA
scripts should keep the same behaviour, the issue only caught in AIPS
script sounds not solide.
The issue is more likely as the ecspi errata
ERR009165(http://www.nxp.com/docs/en/errata/IMX6DQCE.pdf):
eCSPI: TXFIFO empty flag glitch can cause the current FIFO transfer to
be sent twice
So revert commit 'dd4b487b32a3' firstly.
Signed-off-by: Robin Gong <yibin.gong@nxp.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Robin Gong [Wed, 14 Jul 2021 10:20:41 +0000 (18:20 +0800)]
Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
There are two ways for SDMA accessing SPBA devices: one is SDMA->AIPS
->SPBA(masterA port), another is SDMA->SPBA(masterC port). Please refer
to the 'Figure 58-1. i.MX 6Dual/6Quad SPBA connectivity' of i.mx6DQ
Reference Manual. SDMA provide the corresponding app_2_mcu/mcu_2_app and
shp_2_mcu/mcu_2_shp script for such two options. So both AIPS and SPBA
scripts should keep the same behaviour, the issue only caught in AIPS
script sounds not solide.
The issue is more likely as the ecspi errata
ERR009165(http://www.nxp.com/docs/en/errata/IMX6DQCE.pdf):
eCSPI: TXFIFO empty flag glitch can cause the current FIFO transfer to
be sent twice
So revert commit 'df07101e1c4a' firstly.
Signed-off-by: Robin Gong <yibin.gong@nxp.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
ARM: dts: colibri-imx6ull: limit SDIO clock to 25MHz
NXP and AzureWave don't recommend using SDIO bus mode 3.3V@50MHz due
to noise affecting the wireless throughput. Colibri iMX6ULL uses only
3.3V signaling for Wi-Fi module AW-CM276NF.
Michael Walle [Fri, 2 Jul 2021 19:49:14 +0000 (21:49 +0200)]
arm64: dts: ls1028: sl28: fix networking for variant 2
The PHY configuration for the variant 2 is still missing the flag for
in-band signalling between PHY and MAC. Both sides - MAC and PHY - have
to match the setting. For now, Linux only supports setting the MAC side
and thus it has to match the setting the bootloader is configuring.
Enable in-band signalling to make ethernet work.
Fixes: ab43f0307449 ("arm64: dts: ls1028a: sl28: add support for variant 2") Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Lucas Stach [Mon, 28 Jun 2021 21:09:55 +0000 (23:09 +0200)]
Revert "soc: imx8m: change to use platform driver"
With the SoC matching changed to a platform driver the match data
is available only after other drivers, which may rely on it are
already probed. This breaks at least the CAAM driver on i.MX8M.
Revert the change until all those drivers have been audited and
changed to be able to eal with match data being available later
in the boot process.
Fixes: 7d981405d0fd ("soc: imx8m: change to use platform driver") Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Acked-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Russell King [Sat, 19 Jun 2021 15:55:31 +0000 (16:55 +0100)]
ARM: dts: add SolidRun SolidSense support
Add support for the SolidRun SolidSense platform, which is a
Hummingboard2 with a daughter card with two Nordic software defined
radios and a couple of bi-color LEDs.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Maxime Chevallier [Fri, 25 Jun 2021 12:13:53 +0000 (14:13 +0200)]
ARM: dts: imx6qdl-sr-som: Increase the PHY reset duration to 10ms
The AR803x PHY used on this modules seems to require the reset line to
be asserted for around 10ms in order to avoid rare cases where the PHY
gets stuck in an incoherent state that prevents it to function
correctly.
The previous value of 2ms was found to be problematic on some setups,
causing intermittent issues where the PHY would be unresponsive
every once in a while on some sytems, with a low occurrence (it typically
took around 30 consecutive reboots to encounter the issue).
Bumping the delay to the 10ms makes the issue dissapear, with more than
2500 consecutive reboots performed without the issue showing-up.
Fixes: 208d7baf8085 ("ARM: imx: initial SolidRun HummingBoard support") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Tested-by: Hervé Codina <herve.codina@bootlin.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Russell King (Oracle) [Sat, 19 Jun 2021 15:55:26 +0000 (16:55 +0100)]
dt-bindings: arm: fsl: add SolidSense boards
Add SolidRun SolidSense boards.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Mirela Rabulea [Sat, 19 Jun 2021 14:36:10 +0000 (17:36 +0300)]
dt-bindings: media: imx-jpeg: Add compatible for i.MX8QM JPEG codec
Add two more compatibles: "nxp,imx8qm-jpgdec" and " nxp,imx8qm-jpgenc".
Also update the compatible property to ensure mutually exclusive usage of
encoder and decoder compatibles.
Update examples.
Fabio Estevam [Thu, 17 Jun 2021 14:54:15 +0000 (11:54 -0300)]
ARM: imx: common: Move prototype outside the SMP block
Currently the imx_gpcv2_set_core1_pdn_pup_by_software() prototype is
guarded by the CONFIG_SMP symbol. This causes W=1 build warnings when
CONFIG_SMP is not selected:
arch/arm/mach-imx/src.c:103:6: warning: no previous prototype for 'imx_gpcv2_set_core1_pdn_pup_by_software' [-Wmissing-prototypes]
Fix it by moving the imx_gpcv2_set_core1_pdn_pup_by_software() prototype
outside of the CONFIG_SMP block.
Fixes: e34645f45805 ("ARM: imx: add smp support for imx7d") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Yang Yingliang [Tue, 15 Jun 2021 12:52:38 +0000 (20:52 +0800)]
ARM: imx: add missing iounmap()
Commit e76bdfd7403a ("ARM: imx: Added perf functionality to mmdc driver")
introduced imx_mmdc_remove(), the mmdc_base need be unmapped in it if
config PERF_EVENTS is enabled.
If imx_mmdc_perf_init() fails, the mmdc_base also need be unmapped.
Fixes: e76bdfd7403a ("ARM: imx: Added perf functionality to mmdc driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Vladimir Oltean [Tue, 8 Jun 2021 11:26:58 +0000 (14:26 +0300)]
arm64: dts: ls1028a: fix node name for the sysclk
U-Boot attempts to fix up the "clock-frequency" property of the "/sysclk" node:
https://elixir.bootlin.com/u-boot/v2021.04/source/arch/arm/cpu/armv8/fsl-layerscape/fdt.c#L512
but fails to do so:
## Booting kernel from Legacy Image at a1000000 ...
Image Name:
Created: 2021-06-08 10:31:38 UTC
Image Type: AArch64 Linux Kernel Image (gzip compressed)
Data Size: 15431370 Bytes = 14.7 MiB
Load Address: 80080000
Entry Point: 80080000
Verifying Checksum ... OK
## Flattened Device Tree blob at a0000000
Booting using the fdt blob at 0xa0000000
Uncompressing Kernel Image
Loading Device Tree to 00000000fbb19000, end 00000000fbb22717 ... OK
Unable to update property /sysclk:clock-frequency, err=FDT_ERR_NOTFOUND
Starting kernel ...
All Layerscape SoCs except LS1028A use "sysclk" as the node name, and
not "clock-sysclk". So change the node name of LS1028A accordingly.
Fixes: 8897f3255c9c ("arm64: dts: Add support for NXP LS1028A SoC") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
I know nothing about zone_device pages and !device_private pages; but if
try_to_migrate_one() will do nothing for them, then it's better that
try_to_migrate() filter them first, than trawl through all their vmas.
Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Link: https://lore.kernel.org/lkml/1241d356-8ec9-f47b-a5ec-9b2bf66d242@google.com/ Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Yang Shi <shy828301@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm/rmap: fix new bug: premature return from page_mlock_one()
In the unlikely race case that page_mlock_one() finds VM_LOCKED has been
cleared by the time it got page table lock, page_vma_mapped_walk_done()
must be called before returning, either explicitly, or by a final call
to page_vma_mapped_walk() - otherwise the page table remains locked.
Fixes: cd62734ca60d ("mm/rmap: split try_to_munlock from try_to_unmap") Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Reported-by: kernel test robot <oliver.sang@intel.com> Link: https://lore.kernel.org/lkml/20210711151446.GB4070@xsang-OptiPlex-9020/ Link: https://lore.kernel.org/lkml/f71f8523-cba7-3342-40a7-114abc5d1f51@google.com/ Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Yang Shi <shy828301@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm/rmap: fix old bug: munlocking THP missed other mlocks
The kernel recovers in due course from missing Mlocked pages: but there
was no point in calling page_mlock() (formerly known as
try_to_munlock()) on a THP, because nothing got done even when it was
found to be mapped in another VM_LOCKED vma.
It's true that we need to be careful: Mlocked accounting of pte-mapped
THPs is too difficult (so consistently avoided); but Mlocked accounting
of only-pmd-mapped THPs is supposed to work, even when multiple mappings
are mlocked and munlocked or munmapped. Refine the tests.
There is already a VM_BUG_ON_PAGE(PageDoubleMap) in page_mlock(), so
page_mlock_one() does not even have to worry about that complication.
(I said the kernel recovers: but would page reclaim be likely to split
THP before rediscovering that it's VM_LOCKED? I've not followed that up)
Fixes: 9a73f61bdb8a ("thp, mlock: do not mlock PTE-mapped file huge pages") Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Link: https://lore.kernel.org/lkml/cfa154c-d595-406-eb7d-eb9df730f944@google.com/ Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alistair Popple <apopple@nvidia.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm/rmap: fix comments left over from recent changes
Parallel developments in mm/rmap.c have left behind some out-of-date
comments: try_to_migrate_one() also accepts TTU_SYNC (already commented
in try_to_migrate() itself), and try_to_migrate() returns nothing at
all.
TTU_SPLIT_FREEZE has just been deleted, so reword the comment about it
in mm/huge_memory.c; and TTU_IGNORE_ACCESS was removed in 5.11, so
delete the "recently referenced" comment from try_to_unmap_one() (once
upon a time the comment was near the removed codeblock, but they drifted
apart).
Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Link: https://lore.kernel.org/lkml/563ce5b2-7a44-5b4d-1dfd-59a0e65932a9@google.com/ Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Yang Shi <shy828301@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'irq-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Two fixes:
- Fix a MIPS IRQ handling RCU bug
- Remove a DocBook annotation for a parameter that doesn't exist
anymore"
* tag 'irq-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mips: Fix RCU violation when using irqdomain lookup on interrupt entry
genirq/irqdesc: Drop excess kernel-doc entry @lookup
Merge tag 'sched-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Three fixes:
- Fix load tracking bug/inconsistency
- Fix a sporadic CFS bandwidth constraints enforcement bug
- Fix a uclamp utilization tracking bug for newly woken tasks"
* tag 'sched-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/uclamp: Ignore max aggregation if rq is idle
sched/fair: Fix CFS bandwidth hrtimer expiry type
sched/fair: Sync load_sum with load_avg after dequeue
- Add cstate event support for Intel ICELAKE_X and ICELAKE_D"
* tag 'perf-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Clean up error handling path of iio mapping
perf/x86/cstate: Add ICELAKE_X and ICELAKE_D support
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This is a set of minor fixes and clean ups in the core and various
drivers.
The only core change in behaviour is the I/O retry for spinup notify,
but that shouldn't impact anything other than the failing case"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits)
scsi: virtio_scsi: Add validation for residual bytes from response
scsi: ipr: System crashes when seeing type 20 error
scsi: core: Retry I/O for Notify (Enable Spinup) Required error
scsi: mpi3mr: Fix warnings reported by smatch
scsi: qedf: Add check to synchronize abort and flush
scsi: MAINTAINERS: Add mpi3mr driver maintainers
scsi: libfc: Fix array index out of bound exception
scsi: mvsas: Use DEVICE_ATTR_RO()/RW() macro
scsi: megaraid_mbox: Use DEVICE_ATTR_ADMIN_RO() macro
scsi: qedf: Use DEVICE_ATTR_RO() macro
scsi: qedi: Use DEVICE_ATTR_RO() macro
scsi: message: mptfc: Switch from pci_ to dma_ API
scsi: be2iscsi: Fix some missing space in some messages
scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe()
scsi: ufs: Fix build warning without CONFIG_PM
scsi: bnx2fc: Remove meaningless bnx2fc_abts_cleanup() return value assignment
scsi: qla2xxx: Add heartbeat check
scsi: virtio_scsi: Do not overwrite SCSI status
scsi: libsas: Add LUN number check in .slave_alloc callback
scsi: core: Inline scsi_mq_alloc_queue()
...
Merge tag 'perf-tools-for-v5.14-2021-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tool updates from Arnaldo Carvalho de Melo:
"New features:
- Enable use of BPF counters with 'perf stat --for-each-cgroup',
using per-CPU 'cgroup-switch' events with an attached BPF program
that does aggregation per-cgroup in the kernel instead of using
per-cgroup perf events.
- Add Topdown metrics L2 events as default events in 'perf stat' for
systems having those events.
Hardware tracing:
- Add a config for max loops without consuming a packet in the Intel
PT packet decoder, set via 'perf config intel-pt.max-loops=N'
Hardware enablement:
- Disable misleading NMI watchdog message in 'perf stat' on hybrid
systems such as Intel Alder Lake.
- Add a dummy event on hybrid systems to collect metadata records.
- Add 24x7 nest metric events for the Power10 platform.
Fixes:
- Fix event parsing for PMUs starting with the same prefix.
- Fix the 'perf trace' 'trace' alias installation dir.
- Fix buffer size to report iregs in perf script python scripts,
supporting the extended registers in PowerPC.
- Fix overflow in elf_sec__is_text().
- Fix 's' on source line when disasm is empty in the annotation TUI,
accessible via 'perf annotate', 'perf report' and 'perf top'.
- Plug leaks in scandir() returned dirent entries in 'perf test' when
sorting the shell tests.
- Fix --task and --stat with pipe input in 'perf report'.
- Fix 'perf probe' use of debuginfo files by build id.
- If a DSO has both dynsym and symtab ELF sections, read from both
when loading the symbol table, fixing a problem processing Fedora
32 glibc DSOs.
Libraries:
- Add grouping of events to libperf, from code in tools/perf,
allowing libperf users to use that mode.
Misc:
- Filter plt stubs from the 'perf probe --functions' output.
- Update UAPI header copies for asound, DRM, mman-common.h and the
ones affected by the quotactl_fd syscall"
* tag 'perf-tools-for-v5.14-2021-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (29 commits)
perf test: Add free() calls for scandir() returned dirent entries
libperf: Add tests for perf_evlist__set_leader()
libperf: Remove BUG_ON() from library code in get_group_fd()
libperf: Add group support to perf_evsel__open()
perf tools: Fix pattern matching for same substring in different PMU type
perf record: Add a dummy event on hybrid systems to collect metadata records
perf stat: Add Topdown metrics L2 events as default events
libperf: Adopt evlist__set_leader() from tools/perf as perf_evlist__set_leader()
libperf: Move 'nr_groups' from tools/perf to evlist::nr_groups
libperf: Move 'leader' from tools/perf to perf_evsel::leader
libperf: Move 'idx' from tools/perf to perf_evsel::idx
libperf: Change tests to single static and shared binaries
perf intel-pt: Add a config for max loops without consuming a packet
perf stat: Disable the NMI watchdog message on hybrid
perf vendor events power10: Adds 24x7 nest metric events for power10 platform
perf script python: Fix buffer size to report iregs in perf script
perf trace: Fix the perf trace link location
perf top: Fix overflow in elf_sec__is_text()
perf annotate: Fix 's' on source line when disasm is empty
perf probe: Do not show @plt function by default
...
Commit dbbee9d5cd83 ("mm/page_alloc: convert per-cpu list protection to
local_lock") folded in a workaround patch for pahole that was unable to
deal with zero-sized percpu structures.
A superior workaround is achieved with commit a0b8200d06ad ("kbuild:
skip per-CPU BTF generation for pahole v1.18-v1.21").
This patch reverts the dummy field and the pahole version check.
Fixes: dbbee9d5cd83 ("mm/page_alloc: convert per-cpu list protection to local_lock") Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arch/arm/mach-ixp4xx/include/mach/platform.h now gets included indirectly
and defines REG_OFFSET. Rename the register and bit definition to something
specific to the driver.
Merge tag '5.14-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"13 cifs/smb3 fixes. Most are to address minor issues pointed out by
Coverity.
Also includes a packet signing enhancement and mount improvement"
* tag '5.14-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal version number
cifs: prevent NULL deref in cifs_compose_mount_options()
SMB3.1.1: Add support for negotiating signing algorithm
cifs: use helpers when parsing uid/gid mount options and validate them
CIFS: Clarify SMB1 code for POSIX Lock
CIFS: Clarify SMB1 code for rename open file
CIFS: Clarify SMB1 code for delete
CIFS: Clarify SMB1 code for SetFileSize
smb3: fix typo in header file
CIFS: Clarify SMB1 code for UnixSetPathInfo
CIFS: Clarify SMB1 code for UnixCreateSymLink
cifs: clarify SMB1 code for UnixCreateHardLink
cifs: make locking consistent around the server session status
Merge tag 'i3c/for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
- two small fixes to the svc driver
* tag 'i3c/for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: svc: fix doc warning in svc-i3c-master.c
i3c: master: svc: drop free_irq of devm_request_irq allocated irq
- Stop the thermal zone monitoring when unregistering it to prevent a
temperature update without the 'get_temp' callback (Dmitry Osipenko)
- Add rk3568 DT bindings, convert bindings to yaml schemas and add the
corresponding compatible in the Rockchip sensor (Ezequiel Garcia)
- Add the sc8180x compatible for the Qualcomm tsensor (Bjorn Andersson)
- Use the find_first_zero_bit() function instead of custom code (Andy
Shevchenko)
- Fix the kernel doc for the device cooling device (Yang Li)
- Reorg the processor thermal int340x to set the scene for the PCI mmio
driver (Srinivas Pandruvada)
- Add PCI MMIO driver for the int340x processor thermal driver
(Srinivas Pandruvada)
- Add hwmon sensors for the mediatek sensor (Frank Wunderlich)
- Fix warning for return value reported by Smatch for the int340x
thermal processor (Srinivas Pandruvada)
- Fix wrong register access and decoding for the int340x thermal
processor (Srinivas Pandruvada)
* tag 'thermal-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (23 commits)
thermal/drivers/int340x/processor_thermal: Fix tcc setting
thermal/drivers/int340x/processor_thermal: Fix warning for return value
thermal/drivers/mediatek: Add sensors-support
thermal/drivers/int340x/processor_thermal: Add PCI MMIO based thermal driver
thermal/drivers/int340x/processor_thermal: Split enumeration and processing part
thermal: devfreq_cooling: Fix kernel-doc
thermal/drivers/intel/intel_soc_dts_iosf: Switch to use find_first_zero_bit()
dt-bindings: thermal: tsens: Add sc8180x compatible
dt-bindings: rockchip-thermal: Support the RK3568 SoC compatible
dt-bindings: thermal: convert rockchip-thermal to json-schema
thermal/core/thermal_of: Stop zone device before unregistering it
dt-bindings: thermal: Add binding for Tegra30 thermal sensor
thermal/drivers/sprd: Add missing of_node_put for loop iteration
thermal/drivers/imx_sc: Add missing of_node_put for loop iteration
thermal/drivers/rcar_gen3_thermal: Do not shadow rcar_gen3_ths_tj_1
thermal/drivers/rcar_gen3_thermal: Fix coefficient calculations
thermal/drivers/st: Use devm_platform_get_and_ioremap_resource()
thermal/core: Correct function name thermal_zone_device_unregister()
dt-bindings: thermal: tsens: Add compatible string to TSENS binding for SC7280
thermal/drivers/int340x: processor_thermal: Export additional attributes
...
Merge tag 'kbuild-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Increase the -falign-functions alignment for the debug option.
- Remove ugly libelf checks from the top Makefile.
- Make the silent build (-s) more silent.
- Re-compile the kernel if KBUILD_BUILD_TIMESTAMP is specified.
- Various script cleanups
* tag 'kbuild-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (27 commits)
scripts: add generic syscallnr.sh
scripts: check duplicated syscall number in syscall table
sparc: syscalls: use pattern rules to generate syscall headers
parisc: syscalls: use pattern rules to generate syscall headers
nds32: add arch/nds32/boot/.gitignore
kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set
kbuild: modpost: Explicitly warn about unprototyped symbols
kbuild: remove trailing slashes from $(KBUILD_EXTMOD)
kconfig.h: explain IS_MODULE(), IS_ENABLED()
kconfig: constify long_opts
scripts/setlocalversion: simplify the short version part
scripts/setlocalversion: factor out 12-chars hash construction
scripts/setlocalversion: add more comments to -dirty flag detection
scripts/setlocalversion: remove workaround for old make-kpkg
scripts/setlocalversion: remove mercurial, svn and git-svn supports
kbuild: clean up ${quiet} checks in shell scripts
kbuild: sink stdout from cmd for silent build
init: use $(call cmd,) for generating include/generated/compile.h
kbuild: merge scripts/mkmakefile to top Makefile
sh: move core-y in arch/sh/Makefile to arch/sh/Kbuild
...
Merge tag 's390-5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Fix preempt_count initialization.
- Rework call_on_stack() macro to add proper type handling and avoid
possible register corruption.
- More error prone "register asm" removal and fixes.
- Fix syscall restarting when multiple signals are coming in. This adds
minimalistic trampolines to vdso so we can return from signal without
using the stack which requires pgm check handler hacks when NX is
enabled.
- Remove HAVE_IRQ_EXIT_ON_IRQ_STACK since this is no longer true after
switch to generic entry.
- Fix protected virtualization secure storage access exception
handling.
- Make machine check C handler always enter with DAT enabled and move
register validation to C code.
- Fix tinyconfig boot problem by avoiding MONITOR CALL without
CONFIG_BUG.
- Increase asm symbols alignment to 16 to make it consistent with
compilers.
- Enable concurrent access to the CPU Measurement Counter Facility.
- Add support for dynamic AP bus size limit and rework ap_dqap to deal
with messages greater than recv buffer.
* tag 's390-5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits)
s390: preempt: Fix preempt_count initialization
s390/linkage: increase asm symbols alignment to 16
s390: rename CALL_ON_STACK_NORETURN() to call_on_stack_noreturn()
s390: add type checking to CALL_ON_STACK_NORETURN() macro
s390: remove old CALL_ON_STACK() macro
s390/softirq: use call_on_stack() macro
s390/lib: use call_on_stack() macro
s390/smp: use call_on_stack() macro
s390/kexec: use call_on_stack() macro
s390/irq: use call_on_stack() macro
s390/mm: use call_on_stack() macro
s390: introduce proper type handling call_on_stack() macro
s390/irq: simplify on_async_stack()
s390/irq: inline do_softirq_own_stack()
s390/irq: simplify do_softirq_own_stack()
s390/ap: get rid of register asm in ap_dqap()
s390: rename PIF_SYSCALL_RESTART to PIF_EXECVE_PGSTE_RESTART
s390: move restart of execve() syscall
s390/signal: remove sigreturn on stack
s390/signal: switch to using vdso for sigreturn and syscall restart
...
Merge tag 'mips_5.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fix for accesing gic via vdso
- two build fixes
* tag 'mips_5.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: vdso: Invalid GIC access through VDSO
mips: disable branch profiling in boot/decompress.o
mips: always link byteswap helpers into decompressor
Merge tag 'arm-defconfig-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfig updates from "Olof Johansson
"A set of defconfig changes, we keep them in a separate branch to avoid
conflicts between topics by separating them out.
These changes are almost exclusively turning on new drivers for
various platforms, or turning on modules for new drivers for the
shared generic configs"
* tag 'arm-defconfig-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (22 commits)
arm64: defconfig: Enable renesas usb xhci pci host controller
arm64: defconfig: Visconti: Enable GPIO
arm64: defconfig: Visconti: Enable PWM
arm64: defconfig: add drivers needed for DragonBoard410c
ARM: config: aspeed: Add DEBUG_FS and EXT4
ARM: ixp4xx_defconfig: add MTD_PHYSMAP
ARM: ixp4xx_defconfig: add CONFIG_SERIAL_OF_PLATFORM
ARM: imx_v6_v7_defconfig: Select the Wifi ath10k sdio driver
ARM: exynos_defconfig: restore framebuffer support
arm64: defconfig: Enable ARCH_R9A07G044
ARM: configs: at91_dt_defconfig: configs for sam9x60
arm64: defconfig: Enable Exynos UFS driver
arm64: defconfig: qcom: enable interconnect for SM8350
ARM: tegra_defconfig: Enable CONFIG_DEVFREQ_THERMAL
arm64: defconfig: Enable usb2_clksel for R-Car Gen3 and RZ/G2
arm64: defconfig: enable Layerscape EDAC driver
ARM: omap2plus_defconfig: Add LP5523 LED driver
ARM: omap2plus_defconfig: Add WL1251 and WEXT modules
ARM: shmobile: defconfig: Refresh for v5.13-rc1
arm64: defconfig: Allow Mediatek boards to boot from the mmc
...
Merge tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Olof Johansson:
- Reset controllers: Adding support for Microchip Sparx5 Switch.
- Memory controllers: ARM Primecell PL35x SMC memory controller driver
cleanups and improvements.
- i.MX SoC drivers: Power domain support for i.MX8MM and i.MX8MN.
- Rockchip: RK3568 power domains support + DT binding updates,
cleanups.
- Qualcomm SoC drivers: Amend socinfo with more SoC/PMIC details,
including support for MSM8226, MDM9607, SM6125 and SC8180X.
- ARM FFA driver: "Firmware Framework for ARMv8-A", defining management
interfaces and communication (including bus model) between partitions
both in Normal and Secure Worlds.
- Tegra Memory controller changes, including major rework to deal with
identity mappings at boot and integration with ARM SMMU pieces.
* tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (120 commits)
firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string
firmware: turris-mox-rwtm: show message about HWRNG registration
firmware: turris-mox-rwtm: fail probing when firmware does not support hwrng
firmware: turris-mox-rwtm: report failures better
firmware: turris-mox-rwtm: fix reply status decoding function
soc: imx: gpcv2: add support for i.MX8MN power domains
dt-bindings: add defines for i.MX8MN power domains
firmware: tegra: bpmp: Fix Tegra234-only builds
iommu/arm-smmu: Use Tegra implementation on Tegra186
iommu/arm-smmu: tegra: Implement SID override programming
iommu/arm-smmu: tegra: Detect number of instances at runtime
dt-bindings: arm-smmu: Add Tegra186 compatible string
firmware: qcom_scm: Add MDM9607 compatible
soc: qcom: rpmpd: Add MDM9607 RPM Power Domains
soc: renesas: Add support to read LSI DEVID register of RZ/G2{L,LC} SoC's
soc: renesas: Add ARCH_R9A07G044 for the new RZ/G2L SoC's
dt-bindings: soc: rockchip: drop unnecessary #phy-cells from grf.yaml
memory: emif: remove unused frequency and voltage notifiers
memory: fsl_ifc: fix leak of private memory on probe failure
memory: fsl_ifc: fix leak of IO mapping on probe failure
...
Merge tag 'arm-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Olof Johansson:
"Like always, the DT branch is sizable. There are numerous additions
and fixes to existing platforms, but also a handful of new ones
introduced. Less than some other releases, but there's been
significant work on cleanups, refactorings and device enabling on
existing platforms.
A non-exhaustive list of new material:
- Refactoring of BCM2711 dtsi structure to add support for the
Raspberry Pi 400
- Rockchip: RK3568 SoC and EVB, video codecs for
rk3036/3066/3188/322x
- Qualcomm: SA8155p Automotive platform (SM8150 derivative),
SM8150/8250 enhancements and support for Sony Xperia 1/1II and
5/5II
- TI K3: PCI/USB3 support on AM64-sk boards, R5 remoteproc
definitions
- TI OMAP: Various cleanups
- Tegra: Audio support for Jetson Xavier NX, SMMU support on Tegra194
- Qualcomm: lots of additions for peripherals across several SoCs,
and new support for Microsoft Surface Duo (SM8150-based), Huawei
Ascend G7.
- i.MX: Numerous additions of features across SoCs and boards.
- Allwinner: More device bindings for V3s, Forlinx OKA40i-C and
NanoPi R1S H5 boards
- MediaTek: More device bindings for mt8167, new Chromebook system
variants for mt8183
- Renesas: RZ/G2L SoC and EVK added
- Amlogic: BananaPi BPI-M5 board added"
* tag 'arm-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (511 commits)
arm64: dts: rockchip: add basic dts for RK3568 EVB
arm64: dts: rockchip: add core dtsi for RK3568 SoC
arm64: dts: rockchip: add generic pinconfig settings used by most Rockchip socs
ARM: dts: rockchip: add vpu and vdec node for RK322x
ARM: dts: rockchip: add vpu nodes for RK3066 and RK3188
ARM: dts: rockchip: add vpu node for RK3036
arm64: dts: ipq8074: Add QUP6 I2C node
arm64: dts: rockchip: Re-add regulator-always-on for vcc_sdio for rk3399-roc-pc
arm64: dts: rockchip: Re-add regulator-boot-on, regulator-always-on for vdd_gpu on rk3399-roc-pc
arm64: dts: rockchip: add ir-receiver for rk3399-roc-pc
arm64: dts: rockchip: Add USB-C port details for rk3399 Firefly
arm64: dts: rockchip: Sort rk3399 firefly pinmux entries
arm64: dts: rockchip: add infrared receiver node to RK3399 Firefly
arm64: dts: rockchip: add SPDIF node for rk3399-firefly
arm64: dts: rockchip: Add Rotation Property for OGA Panel
arm64: dts: qcom: sc7180: bus votes for eMMC and SD card
arm64: dts: qcom: sm8250-edo: Add Samsung touchscreen
arm64: dts: qcom: sm8250-edo: Enable GPI DMA
arm64: dts: qcom: sm8250-edo: Enable ADSP/CDSP/SLPI
arm64: dts: qcom: sm8250-edo: Enable PCIe
...
Merge tag 'arm-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Olof Johansson:
"A few SoC (code) changes have queued up this cycle, mostly for minor
changes and some refactoring and cleanup of legacy platforms. This
branch also contains a few of the fixes that weren't sent in by the
end of the release (all fairly minor).
- Adding an additional maintainer for the TEE subsystem (Sumit Garg)
- Quite a significant modernization of the IXP4xx platforms by Linus
Walleij, revisiting with a new PCI host driver/binding, removing
legacy mach/* include dependencies and moving platform
detection/config to drivers/soc. Also some updates/cleanup of
platform data.
- Core power domain support for Tegra platforms, and some
improvements in build test coverage by adding stubs for compile
test targets.
- A handful of updates to i.MX platforms, adding legacy (non-PSCI)
SMP support on i.MX7D, SoC ID setup for i.MX50, removal of platform
data and board fixups for iMX6/7.
... and a few smaller changes and fixes for Samsung, OMAP, Allwinner,
Rockchip"
* tag 'arm-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (53 commits)
MAINTAINERS: Add myself as TEE subsystem reviewer
ixp4xx: fix spelling mistake in Kconfig "Devce" -> "Device"
hw_random: ixp4xx: Add OF support
hw_random: ixp4xx: Add DT bindings
hw_random: ixp4xx: Turn into a module
hw_random: ixp4xx: Use SPDX license tag
hw_random: ixp4xx: enable compile-testing
pata: ixp4xx: split platform data to its own header
soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h
PCI: ixp4xx: Add a new driver for IXP4xx
PCI: ixp4xx: Add device tree bindings for IXP4xx
ARM/ixp4xx: Make NEED_MACH_IO_H optional
ARM/ixp4xx: Move the virtual IObases
MAINTAINERS: ARM/MStar/Sigmastar SoCs: Add a link to the MStar tree
ARM: debug: add UART early console support for MSTAR SoCs
ARM: dts: ux500: Fix LED probing
ARM: imx: add smp support for imx7d
ARM: imx6q: drop of_platform_default_populate() from init_machine
arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory
soc/tegra: fuse: Fix Tegra234-only builds
...
Merge tag 'fixes-2021-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"This is a fix for the rework of ARM's pfn_valid() implementation
merged during this merge window.
Don't abuse pfn_valid() to check if pfn is in RAM
The semantics of pfn_valid() is to check presence of the memory map
for a PFN and not whether a PFN is in RAM. The memory map may be
present for a hole in the physical memory and if such hole corresponds
to an MMIO range, __arm_ioremap_pfn_caller() will produce a WARN() and
fail.
Use memblock_is_map_memory() instead of pfn_valid() to check if a PFN
is in RAM or not"
* tag 'fixes-2021-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
arm: ioremap: don't abuse pfn_valid() to check if pfn is in RAM
Merge branch 'for-5.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu fix from Dennis Zhou:
"This is just a single change to fix percpu depopulation. The code
relied on depopulation code written specifically for the free path and
relied on vmalloc to do the tlb flush lazily. As we're modifying the
backing pages during the lifetime of a chunk, we need to also flush
the tlb accordingly.
Guenter Roeck reported this issue in [1] on mips. I believe we just
happen to be lucky given the much larger chunk sizes on x86 and
consequently less churning of this memory"
commit 03623b4b041c ("rtc: pcf2127: add tamper detection support")
added support for timestamp interrupts. However they are not being
handled in the irq handler. If a timestamp interrupt occurs it
results in kernel disabling the interrupt and displaying the call
trace:
Handle timestamp interrupts in pcf2127_rtc_irq(). Save time stamp
before clearing TSF1 and TSF2 flags so that it can't be overwritten.
Set a flag to mark if the timestamp is valid and only report to sysfs
if the flag is set. To mimic the hardware behavior, don’t save
another timestamp until the first one has been read by the userspace.
However, if the alarm irq is not configured, keep the old way of
handling timestamp interrupt in the timestamp0 sysfs calls.
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com> Tested-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210629150643.31551-1-ykaukab@suse.de
The offset variable is checked by at91_rtc_readalarm(), but this check
is unnecessary because the previous check knew that the value of this
variable was not 0.
This removes that unnecessary offset variable checks.
rtc: s5m: Check return value of s5m_check_peding_alarm_interrupt()
s5m_check_peding_alarm_interrupt() in s5m_rtc_read_alarm() gets the return
value, but doesn't use it.
This modifies using the s5m_check_peding_alarm_interrupt()"s return value
as the s5m_rtc_read_alarm()'s return value.
projects / users / jedix / linux-maple.git / log