perf tools: Save bpf_prog_info and BTF of new BPF programs

To fully annotate BPF programs with source code mapping, 4 different
information are needed:

    1) PERF_RECORD_KSYMBOL
    2) PERF_RECORD_BPF_EVENT
    3) bpf_prog_info
    4) btf

This patch handles 3) and 4) for BPF programs loaded after 'perf
record|top'.

For timely process of these information, a dedicated event is added to
the side band evlist.

When PERF_RECORD_BPF_EVENT is received via the side band event, the
polling thread gathers 3) and 4) vis sys_bpf and store them in perf_env.

This information is saved to perf.data at the end of 'perf record'.

Committer testing:

The 'wakeup_watermark' member in 'struct perf_event_attr' is inside a
unnamed union, so can't be used in a struct designated initialization
with older gccs, get it out of that, isolating as 'attr.wakeup_watermark
= 1;' to work with all gcc versions.

We also need to add '--no-bpf-event' to the 'perf record'
perf_event_attr tests in 'perf test', as the way that that test goes is
to intercept the events being setup and looking if they match the fields
described in the control files, since now it finds first the side band
event used to catch the PERF_RECORD_BPF_EVENT, they all fail.

With these issues fixed:

Same scenario as for testing BPF programs loaded before 'perf record' or
'perf top' starts, only start the BPF programs after 'perf record|top',
so that its information get collected by the sideband threads, the rest
works as for the programs loaded before start monitoring.

Add missing 'inline' to the bpf_event__add_sb_event() when
HAVE_LIBBPF_SUPPORT is not defined, fixing the build in systems without
binutils devel files installed.

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-16-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf evlist: Introduce side band thread

This patch introduces side band thread that captures extended
information for events like PERF_RECORD_BPF_EVENT.

This new thread uses its own evlist that uses ring buffer with very low
watermark for lower latency.

To use side band thread, we need to:

1. add side band event(s) by calling perf_evlist__add_sb_event();
2. calls perf_evlist__start_sb_thread();
3. at the end of perf run, perf_evlist__stop_sb_thread().

In the next patch, we use this thread to handle PERF_RECORD_BPF_EVENT.

Committer notes:

Add fix by Jiri Olsa for when te sb_tread can't get started and then at
the end the stop_sb_thread() segfaults when joining the (non-existing)
thread.

That can happen when running 'perf top' or 'perf record' as a normal
user, for instance.

Further checks need to be done on top of this to more graciously handle
these possible failure scenarios.

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-15-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf annotate: Enable annotation of BPF programs

In symbol__disassemble(), DSO_BINARY_TYPE__BPF_PROG_INFO dso calls into
a new function symbol__disassemble_bpf(), where annotation line
information is filled based on the bpf_prog_info and btf data saved in
given perf_env.

symbol__disassemble_bpf() uses binutils's libopcodes to disassemble bpf
programs.

Committer testing:

After fixing this:

  -               u64 *addrs = (u64 *)(info_linear->info.jited_ksyms);
  +               u64 *addrs = (u64 *)(uintptr_t)(info_linear->info.jited_ksyms);

Detected when crossbuilding to a 32-bit arch.

And making all this dependent on HAVE_LIBBFD_SUPPORT and
HAVE_LIBBPF_SUPPORT:

1) Have a BPF program running, one that has BTF info, etc, I used
   the tools/perf/examples/bpf/augmented_raw_syscalls.c put in place
   by 'perf trace'.

  # grep -B1 augmented_raw ~/.perfconfig
  [trace]
add_events = /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c
  #
  # perf trace -e *mmsg
  dnf/6245 sendmmsg(20, 0x7f5485a88030, 2, MSG_NOSIGNAL) = 2
  NetworkManager/10055 sendmmsg(22<socket:[1056822]>, 0x7f8126ad1bb0, 2, MSG_NOSIGNAL) = 2

2) Then do a 'perf record' system wide for a while:

  # perf record -a
  ^C[ perf record: Woken up 68 times to write data ]
  [ perf record: Captured and wrote 19.427 MB perf.data (366891 samples) ]
  #

3) Check that we captured BPF and BTF info in the perf.data file:

  # perf report --header-only | grep 'b[pt]f'
  # event : name = cycles:ppp, , id = { 294789, 294790, 294791, 294792, 294793, 294794, 294795, 294796 }, size = 112, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|CPU|PERIOD, read_format = ID, disabled = 1, inherit = 1, mmap = 1, comm = 1, freq = 1, task = 1, precise_ip = 3, sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1, ksymbol = 1, bpf_event = 1
  # bpf_prog_info of id 13
  # bpf_prog_info of id 14
  # bpf_prog_info of id 15
  # bpf_prog_info of id 16
  # bpf_prog_info of id 17
  # bpf_prog_info of id 18
  # bpf_prog_info of id 21
  # bpf_prog_info of id 22
  # bpf_prog_info of id 41
  # bpf_prog_info of id 42
  # btf info of id 2
  #

4) Check which programs got recorded:

   # perf report | grep bpf_prog | head
     0.16%  exe              bpf_prog_819967866022f1e1_sys_enter      [k] bpf_prog_819967866022f1e1_sys_enter
     0.14%  exe              bpf_prog_c1bd85c092d6e4aa_sys_exit       [k] bpf_prog_c1bd85c092d6e4aa_sys_exit
     0.08%  fuse-overlayfs   bpf_prog_819967866022f1e1_sys_enter      [k] bpf_prog_819967866022f1e1_sys_enter
     0.07%  fuse-overlayfs   bpf_prog_c1bd85c092d6e4aa_sys_exit       [k] bpf_prog_c1bd85c092d6e4aa_sys_exit
     0.01%  clang-4.0        bpf_prog_c1bd85c092d6e4aa_sys_exit       [k] bpf_prog_c1bd85c092d6e4aa_sys_exit
     0.01%  clang-4.0        bpf_prog_819967866022f1e1_sys_enter      [k] bpf_prog_819967866022f1e1_sys_enter
     0.00%  clang            bpf_prog_c1bd85c092d6e4aa_sys_exit       [k] bpf_prog_c1bd85c092d6e4aa_sys_exit
     0.00%  runc             bpf_prog_819967866022f1e1_sys_enter      [k] bpf_prog_819967866022f1e1_sys_enter
     0.00%  clang            bpf_prog_819967866022f1e1_sys_enter      [k] bpf_prog_819967866022f1e1_sys_enter
     0.00%  sh               bpf_prog_c1bd85c092d6e4aa_sys_exit       [k] bpf_prog_c1bd85c092d6e4aa_sys_exit
  #

  This was with the default --sort order for 'perf report', which is:

    --sort comm,dso,symbol

  If we just look for the symbol, for instance:

   # perf report --sort symbol | grep bpf_prog | head
     0.26%  [k] bpf_prog_819967866022f1e1_sys_enter                -      -
     0.24%  [k] bpf_prog_c1bd85c092d6e4aa_sys_exit                 -      -
   #

  or the DSO:

   # perf report --sort dso | grep bpf_prog | head
     0.26%  bpf_prog_819967866022f1e1_sys_enter
     0.24%  bpf_prog_c1bd85c092d6e4aa_sys_exit
  #

We'll see the two BPF programs that augmented_raw_syscalls.o puts in
place,  one attached to the raw_syscalls:sys_enter and another to the
raw_syscalls:sys_exit tracepoints, as expected.

Now we can finally do, from the command line, annotation for one of
those two symbols, with the original BPF program source coude intermixed
with the disassembled JITed code:

  # perf annotate --stdio2 bpf_prog_819967866022f1e1_sys_enter

  Samples: 950  of event 'cycles:ppp', 4000 Hz, Event count (approx.): 553756947, [percent: local period]
  bpf_prog_819967866022f1e1_sys_enter() bpf_prog_819967866022f1e1_sys_enter
  Percent      int sys_enter(struct syscall_enter_args *args)
   53.41         push   %rbp

    0.63         mov    %rsp,%rbp
    0.31         sub    $0x170,%rsp
    1.93         sub    $0x28,%rbp
    7.02         mov    %rbx,0x0(%rbp)
    3.20         mov    %r13,0x8(%rbp)
    1.07         mov    %r14,0x10(%rbp)
    0.61         mov    %r15,0x18(%rbp)
    0.11         xor    %eax,%eax
    1.29         mov    %rax,0x20(%rbp)
    0.11         mov    %rdi,%rbx
                return bpf_get_current_pid_tgid();
    2.02       → callq  *ffffffffda6776d9
    2.76         mov    %eax,-0x148(%rbp)
                 mov    %rbp,%rsi
               int sys_enter(struct syscall_enter_args *args)
                 add    $0xfffffffffffffeb8,%rsi
                return bpf_map_lookup_elem(pids, &pid) != NULL;
                 movabs $0xffff975ac2607800,%rdi

    1.26       → callq  *ffffffffda6789e9
                 cmp    $0x0,%rax
    2.43       → je     0
                 add    $0x38,%rax
    0.21         xor    %r13d,%r13d
                if (pid_filter__has(&pids_filtered, getpid()))
    0.81         cmp    $0x0,%rax
               → jne    0
                 mov    %rbp,%rdi
                probe_read(&augmented_args.args, sizeof(augmented_args.args), args);
    2.22         add    $0xfffffffffffffeb8,%rdi
    0.11         mov    $0x40,%esi
    0.32         mov    %rbx,%rdx
    2.74       → callq  *ffffffffda658409
                syscall = bpf_map_lookup_elem(&syscalls, &augmented_args.args.syscall_nr);
    0.22         mov    %rbp,%rsi
    1.69         add    $0xfffffffffffffec0,%rsi
                syscall = bpf_map_lookup_elem(&syscalls, &augmented_args.args.syscall_nr);
                 movabs $0xffff975bfcd36000,%rdi

                 add    $0xd0,%rdi
    0.21         mov    0x0(%rsi),%eax
    0.93         cmp    $0x200,%rax
               → jae    0
    0.10         shl    $0x3,%rax

    0.11         add    %rdi,%rax
    0.11       → jmp    0
                 xor    %eax,%eax
                if (syscall == NULL || !syscall->enabled)
    1.07         cmp    $0x0,%rax
               → je     0
                if (syscall == NULL || !syscall->enabled)
    6.57         movzbq 0x0(%rax),%rdi

                if (syscall == NULL || !syscall->enabled)
                 cmp    $0x0,%rdi
    0.95       → je     0
                 mov    $0x40,%r8d
                switch (augmented_args.args.syscall_nr) {
                 mov    -0x140(%rbp),%rdi
                switch (augmented_args.args.syscall_nr) {
                 cmp    $0x2,%rdi
               → je     0
                 cmp    $0x101,%rdi
               → je     0
                 cmp    $0x15,%rdi
               → jne    0
                case SYS_OPEN:  filename_arg = (const void *)args->args[0];
                 mov    0x10(%rbx),%rdx
               → jmp    0
                case SYS_OPENAT: filename_arg = (const void *)args->args[1];
                 mov    0x18(%rbx),%rdx
                if (filename_arg != NULL) {
                 cmp    $0x0,%rdx
               → je     0
                 xor    %edi,%edi
                augmented_args.filename.reserved = 0;
                 mov    %edi,-0x104(%rbp)
                augmented_args.filename.size = probe_read_str(&augmented_args.filename.value,
                 mov    %rbp,%rdi
                 add    $0xffffffffffffff00,%rdi
                augmented_args.filename.size = probe_read_str(&augmented_args.filename.value,
                 mov    $0x100,%esi
               → callq  *ffffffffda658499
                 mov    $0x148,%r8d
                augmented_args.filename.size = probe_read_str(&augmented_args.filename.value,
                 mov    %eax,-0x108(%rbp)
                augmented_args.filename.size = probe_read_str(&augmented_args.filename.value,
                 mov    %rax,%rdi
                 shl    $0x20,%rdi

                 shr    $0x20,%rdi

                if (augmented_args.filename.size < sizeof(augmented_args.filename.value)) {
                 cmp    $0xff,%rdi
               → ja     0
                len -= sizeof(augmented_args.filename.value) - augmented_args.filename.size;
                 add    $0x48,%rax
                len &= sizeof(augmented_args.filename.value) - 1;
                 and    $0xff,%rax
                 mov    %rax,%r8
                 mov    %rbp,%rcx
                return perf_event_output(args, &__augmented_syscalls__, BPF_F_CURRENT_CPU, &augmented_args, len);
                 add    $0xfffffffffffffeb8,%rcx
                 mov    %rbx,%rdi
                 movabs $0xffff975fbd72d800,%rsi

                 mov    $0xffffffff,%edx
               → callq  *ffffffffda658ad9
                 mov    %rax,%r13
               }
                 mov    %r13,%rax
    0.72         mov    0x0(%rbp),%rbx
                 mov    0x8(%rbp),%r13
    1.16         mov    0x10(%rbp),%r14
    0.10         mov    0x18(%rbp),%r15
    0.42         add    $0x28,%rbp
    0.54         leaveq
    0.54       ← retq
  #

Please see 'man perf-config' to see how to control what should be seen,
via ~/.perfconfig [annotate] section, for instance, one can suppress the
source code and see just the disassembly, etc.

Alternatively, use the TUI bu just using 'perf annotate', press
'/bpf_prog' to see the bpf symbols, press enter and do the interactive
annotation, which allows for dumping to a file after selecting the
the various output tunables, for instance, the above without source code
intermixed, plus showing all the instruction offsets:

  # perf annotate bpf_prog_819967866022f1e1_sys_enter

Then press: 's' to hide the source code + 'O' twice to show all
instruction offsets, then 'P' to print to the
bpf_prog_819967866022f1e1_sys_enter.annotation file, which will have:

  # cat bpf_prog_819967866022f1e1_sys_enter.annotation
  bpf_prog_819967866022f1e1_sys_enter() bpf_prog_819967866022f1e1_sys_enter
  Event: cycles:ppp

   53.41    0:   push   %rbp

    0.63    1:   mov    %rsp,%rbp
    0.31    4:   sub    $0x170,%rsp
    1.93    b:   sub    $0x28,%rbp
    7.02    f:   mov    %rbx,0x0(%rbp)
    3.20   13:   mov    %r13,0x8(%rbp)
    1.07   17:   mov    %r14,0x10(%rbp)
    0.61   1b:   mov    %r15,0x18(%rbp)
    0.11   1f:   xor    %eax,%eax
    1.29   21:   mov    %rax,0x20(%rbp)
    0.11   25:   mov    %rdi,%rbx
    2.02   28: → callq  *ffffffffda6776d9
    2.76   2d:   mov    %eax,-0x148(%rbp)
           33:   mov    %rbp,%rsi
           36:   add    $0xfffffffffffffeb8,%rsi
           3d:   movabs $0xffff975ac2607800,%rdi

    1.26   47: → callq  *ffffffffda6789e9
           4c:   cmp    $0x0,%rax
    2.43   50: → je     0
           52:   add    $0x38,%rax
    0.21   56:   xor    %r13d,%r13d
    0.81   59:   cmp    $0x0,%rax
           5d: → jne    0
           63:   mov    %rbp,%rdi
    2.22   66:   add    $0xfffffffffffffeb8,%rdi
    0.11   6d:   mov    $0x40,%esi
    0.32   72:   mov    %rbx,%rdx
    2.74   75: → callq  *ffffffffda658409
    0.22   7a:   mov    %rbp,%rsi
    1.69   7d:   add    $0xfffffffffffffec0,%rsi
           84:   movabs $0xffff975bfcd36000,%rdi

           8e:   add    $0xd0,%rdi
    0.21   95:   mov    0x0(%rsi),%eax
    0.93   98:   cmp    $0x200,%rax
           9f: → jae    0
    0.10   a1:   shl    $0x3,%rax

    0.11   a5:   add    %rdi,%rax
    0.11   a8: → jmp    0
           aa:   xor    %eax,%eax
    1.07   ac:   cmp    $0x0,%rax
           b0: → je     0
    6.57   b6:   movzbq 0x0(%rax),%rdi

           bb:   cmp    $0x0,%rdi
    0.95   bf: → je     0
           c5:   mov    $0x40,%r8d
           cb:   mov    -0x140(%rbp),%rdi
           d2:   cmp    $0x2,%rdi
           d6: → je     0
           d8:   cmp    $0x101,%rdi
           df: → je     0
           e1:   cmp    $0x15,%rdi
           e5: → jne    0
           e7:   mov    0x10(%rbx),%rdx
           eb: → jmp    0
           ed:   mov    0x18(%rbx),%rdx
           f1:   cmp    $0x0,%rdx
           f5: → je     0
           f7:   xor    %edi,%edi
           f9:   mov    %edi,-0x104(%rbp)
           ff:   mov    %rbp,%rdi
          102:   add    $0xffffffffffffff00,%rdi
          109:   mov    $0x100,%esi
          10e: → callq  *ffffffffda658499
          113:   mov    $0x148,%r8d
          119:   mov    %eax,-0x108(%rbp)
          11f:   mov    %rax,%rdi
          122:   shl    $0x20,%rdi

          126:   shr    $0x20,%rdi

          12a:   cmp    $0xff,%rdi
          131: → ja     0
          133:   add    $0x48,%rax
          137:   and    $0xff,%rax
          13d:   mov    %rax,%r8
          140:   mov    %rbp,%rcx
          143:   add    $0xfffffffffffffeb8,%rcx
          14a:   mov    %rbx,%rdi
          14d:   movabs $0xffff975fbd72d800,%rsi

          157:   mov    $0xffffffff,%edx
          15c: → callq  *ffffffffda658ad9
          161:   mov    %rax,%r13
          164:   mov    %r13,%rax
    0.72  167:   mov    0x0(%rbp),%rbx
          16b:   mov    0x8(%rbp),%r13
    1.16  16f:   mov    0x10(%rbp),%r14
    0.10  173:   mov    0x18(%rbp),%r15
    0.42  177:   add    $0x28,%rbp
    0.54  17b:   leaveq
    0.54  17c: ← retq

Another cool way to test all this is to symple use 'perf top' look for
those symbols, go there and press enter, annotate it live :-)

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-13-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf build: Check what binutils's 'disassembler()' signature to use

Commit 003ca0fd2286 ("Refactor disassembler selection") in the binutils
repo, which changed the disassembler() function signature, so we must
use the feature test introduced in fb982666e380 ("tools/bpftool: fix
bpftool build with bintutils >= 2.9") to deal with that.

Committer testing:

After adding the missing function call to test-all.c, and:

  FEATURE_CHECK_LDFLAGS-disassembler-four-args = -bfd -lopcodes

And the fallbacks for cases where we need -liberty and sometimes -lz to
tools/perf/Makefile.config, we get:

  $ make -C tools/perf O=/tmp/build/perf install-bin
  make: Entering directory '/home/acme/git/perf/tools/perf'
    BUILD:   Doing 'make -j8' parallel build

  Auto-detecting system features:
  ...                         dwarf: [ on  ]
  ...            dwarf_getlocations: [ on  ]
  ...                         glibc: [ on  ]
  ...                          gtk2: [ on  ]
  ...                      libaudit: [ on  ]
  ...                        libbfd: [ on  ]
  ...                        libelf: [ on  ]
  ...                       libnuma: [ on  ]
  ...        numa_num_possible_cpus: [ on  ]
  ...                       libperl: [ on  ]
  ...                     libpython: [ on  ]
  ...                      libslang: [ on  ]
  ...                     libcrypto: [ on  ]
  ...                     libunwind: [ on  ]
  ...            libdw-dwarf-unwind: [ on  ]
  ...                          zlib: [ on  ]
  ...                          lzma: [ on  ]
  ...                     get_cpuid: [ on  ]
  ...                           bpf: [ on  ]
  ...                        libaio: [ on  ]
  ...        disassembler-four-args: [ on  ]
    CC       /tmp/build/perf/jvmti/libjvmti.o
    CC       /tmp/build/perf/builtin-bench.o
  <SNIP>
  $
  $

The feature detection test-all.bin gets successfully built and linked:

  $ ls -la /tmp/build/perf/feature/test-all.bin
  -rwxrwxr-x. 1 acme acme 2680352 Mar 19 11:07 /tmp/build/perf/feature/test-all.bin
  $ nm /tmp/build/perf/feature/test-all.bin  | grep -w disassembler
  0000000000061f90 T disassembler
  $

Time to move on to the patches that make use of this disassembler()
routine in binutils's libopcodes.

Signed-off-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-13-songliubraving@fb.com
[ split from a larger patch, added missing FEATURE_CHECK_LDFLAGS-disassembler-four-args ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf bpf: Process PERF_BPF_EVENT_PROG_LOAD for annotation

This patch adds processing of PERF_BPF_EVENT_PROG_LOAD, which sets
proper DSO type/id/etc of memory regions mapped to BPF programs to
DSO_BINARY_TYPE__BPF_PROG_INFO.

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-14-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Introduce DSO_BINARY_TYPE__BPF_PROG_INFO

Introduce a new dso type DSO_BINARY_TYPE__BPF_PROG_INFO for BPF programs. In
symbol__disassemble(), DSO_BINARY_TYPE__BPF_PROG_INFO dso will call into a new
function symbol__disassemble_bpf() in an upcoming patch, where annotation line
information is filled based bpf_prog_info and btf saved in given perf_env.

Committer notes:

Removed the unnamed union with 'bpf_prog' and 'cache' in 'struct dso',
to fix this bug when exiting 'perf top':

  # perf top
  perf: Segmentation fault
  -------- backtrace --------
  perf[0x5a785a]
  /lib64/libc.so.6(+0x385bf)[0x7fd68443c5bf]
  perf(rb_first+0x2b)[0x4d6eeb]
  perf(dso__delete+0xb7)[0x4dffb7]
  perf[0x4f9e37]
  perf(perf_session__delete+0x64)[0x504df4]
  perf(cmd_top+0x1957)[0x454467]
  perf[0x4aad18]
  perf(main+0x61c)[0x42ec7c]
  /lib64/libc.so.6(__libc_start_main+0xf2)[0x7fd684428412]
  perf(_start+0x2d)[0x42eead]
  #
  # addr2line -fe ~/bin/perf 0x4dffb7
  dso_cache__free
  /home/acme/git/perf/tools/perf/util/dso.c:713

That is trying to access the dso->data.cache, and that is not used with
BPF programs, so we end up accessing what is in bpf_prog.first_member,
b00m.

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-13-songliubraving@fb.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf feature detection: Add -lopcodes to feature-libbfd

Both libbfd and libopcodes are distributed with binutil-dev/devel. When
libbfd is present, it is OK to assume that libopcodes also present. This
has been a safe assumption for bpftool.

This patch adds -lopcodes to perf/Makefile.config. libopcodes will be
used in the next commit for BPF annotation.

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-12-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf top: Add option --no-bpf-event

This patch adds option --no-bpf-event to 'perf top', which is the same
as the option of 'perf record'.

The following patches will use this option.

Committer testing:

  # perf top -vv 2> /tmp/perf_event_attr.out
  # cat  /tmp/perf_event_attr.out
  ------------------------------------------------------------
  perf_event_attr:
    size                             112
    { sample_period, sample_freq }   4000
    sample_type                      IP|TID|TIME|CPU|PERIOD
    read_format                      ID
    disabled                         1
    inherit                          1
    mmap                             1
    comm                             1
    freq                             1
    task                             1
    precise_ip                       3
    sample_id_all                    1
    exclude_guest                    1
    mmap2                            1
    comm_exec                        1
    ksymbol                          1
    bpf_event                        1
  ------------------------------------------------------------
  #

After this patch:

  # perf top --no-bpf-event -vv 2> /tmp/perf_event_attr.out
  # cat  /tmp/perf_event_attr.out
  ------------------------------------------------------------
  perf_event_attr:
    size                             112
    { sample_period, sample_freq }   4000
    sample_type                      IP|TID|TIME|CPU|PERIOD
    read_format                      ID
    disabled                         1
    inherit                          1
    mmap                             1
    comm                             1
    freq                             1
    task                             1
    precise_ip                       3
    sample_id_all                    1
    exclude_guest                    1
    mmap2                            1
    comm_exec                        1
    ksymbol                          1
  ------------------------------------------------------------
  #

Signed-off-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-11-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf bpf: Save BTF information as headers to perf.data

This patch enables 'perf record' to save BTF information as headers to
perf.data.

A new header type HEADER_BPF_BTF is introduced for this data.

Committer testing:

As root, being on the kernel sources top level directory, run:

    # perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c -e *msg

Just to compile and load a BPF program that attaches to the
raw_syscalls:sys_{enter,exit} tracepoints to trace the syscalls ending
in "msg" (recvmsg, sendmsg, recvmmsg, sendmmsg, etc).

Make sure you have a recent enough clang, say version 9, to get the
BTF ELF sections needed for this testing:

  # clang --version | head -1
  clang version 9.0.0 (https://git.llvm.org/git/clang.git/ 7906282d3afec5dfdc2b27943fd6c0309086c507) (https://git.llvm.org/git/llvm.git/ a1b5de1ff8ae8bc79dc8e86e1f82565229bd0500)
  # readelf -SW tools/perf/examples/bpf/augmented_raw_syscalls.o | grep BTF
    [22] .BTF              PROGBITS        0000000000000000 000ede 000b0e 00      0   0  1
    [23] .BTF.ext          PROGBITS        0000000000000000 0019ec 0002a0 00      0   0  1
    [24] .rel.BTF.ext      REL             0000000000000000 002fa8 000270 10     30  23  8

Then do a systemwide perf record session for a few seconds:

  # perf record -a sleep 2s

Then look at:

  # perf report --header-only | grep b[pt]f
  # event : name = cycles:ppp, , id = { 1116204, 1116205, 1116206, 1116207, 1116208, 1116209, 1116210, 1116211 }, size = 112, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|PERIOD, read_format = ID, disabled = 1, inherit = 1, mmap = 1, comm = 1, freq = 1, enable_on_exec = 1, task = 1, precise_ip = 3, sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1, ksymbol = 1, bpf_event = 1
  # bpf_prog_info of id 13
  # bpf_prog_info of id 14
  # bpf_prog_info of id 15
  # bpf_prog_info of id 16
  # bpf_prog_info of id 17
  # bpf_prog_info of id 18
  # bpf_prog_info of id 21
  # bpf_prog_info of id 22
  # bpf_prog_info of id 51
  # bpf_prog_info of id 52
  # btf info of id 8
  #

We need to show more info about these BPF and BTF entries , but that can
be done later.

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-10-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf bpf: Save BTF in a rbtree in perf_env

BTF contains information necessary to annotate BPF programs. This patch
saves BTF for BPF programs loaded in the system.

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-9-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf bpf: Save bpf_prog_info information as headers to perf.data

This patch enables perf-record to save bpf_prog_info information as
headers to perf.data. A new header type HEADER_BPF_PROG_INFO is
introduced for this data.

Committer testing:

As root, being on the kernel sources top level directory, run:

  # perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c -e *msg

Just to compile and load a BPF program that attaches to the
raw_syscalls:sys_{enter,exit} tracepoints to trace the syscalls ending
in "msg" (recvmsg, sendmsg, recvmmsg, sendmmsg, etc).

Then do a systemwide perf record session for a few seconds:

  # perf record -a sleep 2s

Then look at:

  # perf report --header-only | grep -i bpf
  # bpf_prog_info of id 13
  # bpf_prog_info of id 14
  # bpf_prog_info of id 15
  # bpf_prog_info of id 16
  # bpf_prog_info of id 17
  # bpf_prog_info of id 18
  # bpf_prog_info of id 21
  # bpf_prog_info of id 22
  # bpf_prog_info of id 208
  # bpf_prog_info of id 209
  #

We need to show more info about these programs, like bpftool does for
the ones running on the system, i.e. 'perf record/perf report' become a
way of saving the BPF state in a machine to then analyse on another,
together with all the other information that is already saved in the
perf.data header:

  # perf report --header-only
  # ========
  # captured on    : Tue Mar 12 11:42:13 2019
  # header version : 1
  # data offset    : 296
  # data size      : 16294184
  # feat offset    : 16294480
  # hostname : quaco
  # os release : 5.0.0+
  # perf version : 5.0.gd783c8
  # arch : x86_64
  # nrcpus online : 8
  # nrcpus avail : 8
  # cpudesc : Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz
  # cpuid : GenuineIntel,6,142,10
  # total memory : 24555720 kB
  # cmdline : /home/acme/bin/perf (deleted) record -a
  # event : name = cycles:ppp, , id = { 3190123, 3190124, 3190125, 3190126, 3190127, 3190128, 3190129, 3190130 }, size = 112, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|CPU|PERIOD, read_format = ID, disabled = 1, inherit = 1, mmap = 1, comm = 1, freq = 1, task = 1, precise_ip = 3, sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1
  # CPU_TOPOLOGY info available, use -I to display
  # NUMA_TOPOLOGY info available, use -I to display
  # pmu mappings: intel_pt = 8, software = 1, power = 11, uprobe = 7, uncore_imc = 12, cpu = 4, cstate_core = 18, uncore_cbox_2 = 15, breakpoint = 5, uncore_cbox_0 = 13, tracepoint = 2, cstate_pkg = 19, uncore_arb = 17, kprobe = 6, i915 = 10, msr = 9, uncore_cbox_3 = 16, uncore_cbox_1 = 14
  # CACHE info available, use -I to display
  # time of first sample : 116392.441701
  # time of last sample : 116400.932584
  # sample duration :   8490.883 ms
  # MEM_TOPOLOGY info available, use -I to display
  # bpf_prog_info of id 13
  # bpf_prog_info of id 14
  # bpf_prog_info of id 15
  # bpf_prog_info of id 16
  # bpf_prog_info of id 17
  # bpf_prog_info of id 18
  # bpf_prog_info of id 21
  # bpf_prog_info of id 22
  # bpf_prog_info of id 208
  # bpf_prog_info of id 209
  # missing features: TRACING_DATA BRANCH_STACK GROUP_DESC AUXTRACE STAT CLOCKID DIR_FORMAT
  # ========
  #

Committer notes:

We can't use the libbpf unconditionally, as the build may have been with
NO_LIBBPF, when we end up with linking errors, so provide dummy
{process,write}_bpf_prog_info() wrapped by HAVE_LIBBPF_SUPPORT for that
case.

Printing are not affected by this, so can continue as is.

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-8-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf bpf: Save bpf_prog_info in a rbtree in perf_env

bpf_prog_info contains information necessary to annotate bpf programs.

This patch saves bpf_prog_info for bpf programs loaded in the system.

Some big picture of the next few patches:

To fully annotate BPF programs with source code mapping, 4 different
informations are needed:

    1) PERF_RECORD_KSYMBOL
    2) PERF_RECORD_BPF_EVENT
    3) bpf_prog_info
    4) btf

Before this set, 1) and 2) in the list are already saved to perf.data
file. For BPF programs that are already loaded before perf run, 1) and 2)
are synthesized by perf_event__synthesize_bpf_events(). For short living
BPF programs, 1) and 2) are generated by kernel.

This set handles 3) and 4) from the list. Again, it is necessary to handle
existing BPF program and short living program separately.

This patch handles 3) for exising BPF programs while synthesizing 1) and
2) in perf_event__synthesize_bpf_events(). These data are stored in
perf_env. The next patch saves these data from perf_env to perf.data as
headers.

Similarly, the two patches after the next saves 4) of existing BPF
programs to perf_env and perf.data.

Another patch later will handle 3) and 4) for short living BPF programs
by monitoring 1) and 2) in a dedicate thread.

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-7-songliubraving@fb.com
[ set env->bpf_progs.infos_cnt to zero in perf_env__purge_bpf() as noted by jolsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf bpf: Make synthesize_bpf_events() receive perf_session pointer instead of perf_tool

This patch changes the arguments of perf_event__synthesize_bpf_events()
to include perf_session* instead of perf_tool*. perf_session will be
used in the next patch.

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-6-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf bpf: Synthesize bpf events with bpf_program__get_prog_info_linear()

With bpf_program__get_prog_info_linear, we can simplify the logic that
synthesizes bpf events.

This patch doesn't change the behavior of the code.

Commiter notes:

Needed this (for all four variables), suggested by Song, to overcome
build failure on debian experimental cross building to MIPS 32-bit:

  -               u8 (*prog_tags)[BPF_TAG_SIZE] = (void *)(info->prog_tags);
  +               u8 (*prog_tags)[BPF_TAG_SIZE] = (void *)(uintptr_t)(info->prog_tags);

  util/bpf-event.c: In function 'perf_event__synthesize_one_bpf_prog':
  util/bpf-event.c:143:35: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
     u8 (*prog_tags)[BPF_TAG_SIZE] = (void *)(info->prog_tags);
                                     ^
  util/bpf-event.c:144:22: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
     __u32 *prog_lens = (__u32 *)(info->jited_func_lens);
                        ^
  util/bpf-event.c:145:23: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
     __u64 *prog_addrs = (__u64 *)(info->jited_ksyms);
                         ^
  util/bpf-event.c:146:22: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
     void *func_infos = (void *)(info->func_info);
                        ^
  cc1: all warnings being treated as errors

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: kernel-team@fb.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-5-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

bpftool: use bpf_program__get_prog_info_linear() in prog.c:do_dump()

This patches uses bpf_program__get_prog_info_linear() to simplify the
logic in prog.c do_dump().

Committer testing:

Before:

  # bpftool prog dump xlated id 208 > /tmp/dump.xlated.before
  # bpftool prog dump jited id 208 > /tmp/dump.jited.before
  # bpftool map dump id 107 > /tmp/map.dump.before

After:

  # ~acme/git/perf/tools/bpf/bpftool/bpftool map dump id 107 > /tmp/map.dump.after
  # ~acme/git/perf/tools/bpf/bpftool/bpftool prog dump xlated id 208 > /tmp/dump.xlated.after
  # ~acme/git/perf/tools/bpf/bpftool/bpftool prog dump jited id 208 > /tmp/dump.jited.after
  # diff -u /tmp/dump.xlated.before /tmp/dump.xlated.after
  # diff -u /tmp/dump.jited.before /tmp/dump.jited.after
  # diff -u /tmp/map.dump.before /tmp/map.dump.after
  # ~acme/git/perf/tools/bpf/bpftool/bpftool prog dump xlated id 208
     0: (bf) r6 = r1
     1: (85) call bpf_get_current_pid_tgid#80800
     2: (63) *(u32 *)(r10 -328) = r0
     3: (bf) r2 = r10
     4: (07) r2 += -328
     5: (18) r1 = map[id:107]
     7: (85) call __htab_map_lookup_elem#85680
     8: (15) if r0 == 0x0 goto pc+1
     9: (07) r0 += 56
    10: (b7) r7 = 0
    11: (55) if r0 != 0x0 goto pc+52
    12: (bf) r1 = r10
    13: (07) r1 += -328
    14: (b7) r2 = 64
    15: (bf) r3 = r6
    16: (85) call bpf_probe_read#-46848
    17: (bf) r2 = r10
    18: (07) r2 += -320
    19: (18) r1 = map[id:106]
    21: (07) r1 += 208
    22: (61) r0 = *(u32 *)(r2 +0)
    23: (35) if r0 >= 0x200 goto pc+3
    24: (67) r0 <<= 3
    25: (0f) r0 += r1
    26: (05) goto pc+1
    27: (b7) r0 = 0
    28: (15) if r0 == 0x0 goto pc+35
    29: (71) r1 = *(u8 *)(r0 +0)
    30: (15) if r1 == 0x0 goto pc+33
    31: (b7) r5 = 64
    32: (79) r1 = *(u64 *)(r10 -320)
    33: (15) if r1 == 0x2 goto pc+2
    34: (15) if r1 == 0x101 goto pc+3
    35: (55) if r1 != 0x15 goto pc+19
    36: (79) r3 = *(u64 *)(r6 +16)
    37: (05) goto pc+1
    38: (79) r3 = *(u64 *)(r6 +24)
    39: (15) if r3 == 0x0 goto pc+15
    40: (b7) r1 = 0
    41: (63) *(u32 *)(r10 -260) = r1
    42: (bf) r1 = r10
    43: (07) r1 += -256
    44: (b7) r2 = 256
    45: (85) call bpf_probe_read_str#-46704
    46: (b7) r5 = 328
    47: (63) *(u32 *)(r10 -264) = r0
    48: (bf) r1 = r0
    49: (67) r1 <<= 32
    50: (77) r1 >>= 32
    51: (25) if r1 > 0xff goto pc+3
    52: (07) r0 += 72
    53: (57) r0 &= 255
    54: (bf) r5 = r0
    55: (bf) r4 = r10
    56: (07) r4 += -328
    57: (bf) r1 = r6
    58: (18) r2 = map[id:105]
    60: (18) r3 = 0xffffffff
    62: (85) call bpf_perf_event_output_tp#-45104
    63: (bf) r7 = r0
    64: (bf) r0 = r7
    65: (95) exit
  #

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: kernel-team@fb.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-4-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools lib bpf: Introduce bpf_program__get_prog_info_linear()

Currently, bpf_prog_info includes 9 arrays. The user has the option to
fetch any combination of these arrays. However, this requires a lot of
handling.

This work becomes more tricky when we need to store bpf_prog_info to a
file, because these arrays are allocated independently.

This patch introduces 'struct bpf_prog_info_linear', which stores arrays
of bpf_prog_info in continuous memory.

Helper functions are introduced to unify the work to get different sets
of bpf_prog_info.  Specifically, bpf_program__get_prog_info_linear()
allows the user to select which arrays to fetch, and handles details for
the user.

Please see the comments right before 'enum bpf_prog_info_array' for more
details and examples.

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lkml.kernel.org/r/ce92c091-e80d-a0c1-4aa0-987706c42b20@iogearbox.net
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: kernel-team@fb.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-3-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf record: Replace option --bpf-event with --no-bpf-event

Currently, monitoring of BPF programs through bpf_event is off by
default for 'perf record'.

To turn it on, the user need to use option "--bpf-event".  As BPF gets
wider adoption in different subsystems, this option becomes
inconvenient.

This patch makes bpf_event on by default, and adds option "--no-bpf-event"
to turn it off. Since option --bpf-event is not released yet, it is safe
to remove it.

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: kernel-team@fb.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-2-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Fix a memory leak in test__perf_evsel__tp_sched_test()

  =================================================================
  ==20875==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 1160 byte(s) in 1 object(s) allocated from:
      #0 0x7f1b6fc84138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138)
      #1 0x55bd50005599 in zalloc util/util.h:23
      #2 0x55bd500068f5 in perf_evsel__newtp_idx util/evsel.c:327
      #3 0x55bd4ff810fc in perf_evsel__newtp /home/work/linux/tools/perf/util/evsel.h:216
      #4 0x55bd4ff81608 in test__perf_evsel__tp_sched_test tests/evsel-tp-sched.c:69
      #5 0x55bd4ff528e6 in run_test tests/builtin-test.c:358
      #6 0x55bd4ff52baf in test_and_print tests/builtin-test.c:388
      #7 0x55bd4ff543fe in __cmd_test tests/builtin-test.c:583
      #8 0x55bd4ff5572f in cmd_test tests/builtin-test.c:722
      #9 0x55bd4ffc4087 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
      #10 0x55bd4ffc45c6 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
      #11 0x55bd4ffc49ca in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
      #12 0x55bd4ffc5138 in main /home/changbin/work/linux/tools/perf/perf.c:520
      #13 0x7f1b6e34809a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

  Indirect leak of 19 byte(s) in 1 object(s) allocated from:
      #0 0x7f1b6fc83f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30)
      #1 0x7f1b6e3ac30f in vasprintf (/lib/x86_64-linux-gnu/libc.so.6+0x8830f)

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fixes: 6a6cd11d4e57 ("perf test: Add test for the sched tracepoint format fields")
Link: http://lkml.kernel.org/r/20190316080556.3075-17-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Fix memory leak by expr__find_other() in test__expr()

  =================================================================
  ==7506==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 13 byte(s) in 3 object(s) allocated from:
      #0 0x7f03339d6070 in __interceptor_strdup (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x3b070)
      #1 0x5625e53aaef0 in expr__find_other util/expr.y:221
      #2 0x5625e51bcd3f in test__expr tests/expr.c:52
      #3 0x5625e51528e6 in run_test tests/builtin-test.c:358
      #4 0x5625e5152baf in test_and_print tests/builtin-test.c:388
      #5 0x5625e51543fe in __cmd_test tests/builtin-test.c:583
      #6 0x5625e515572f in cmd_test tests/builtin-test.c:722
      #7 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
      #8 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
      #9 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
      #10 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520
      #11 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fixes: 075167363f8b ("perf tools: Add a simple expression parser for JSON")
Link: http://lkml.kernel.org/r/20190316080556.3075-16-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Fix a memory leak of cpu_map object in the openat_syscall_event_on_all_cpus test

  =================================================================
  ==7497==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 40 byte(s) in 1 object(s) allocated from:
      #0 0x7f0333a88f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30)
      #1 0x5625e5326213 in cpu_map__trim_new util/cpumap.c:45
      #2 0x5625e5326703 in cpu_map__read util/cpumap.c:103
      #3 0x5625e53267ef in cpu_map__read_all_cpu_map util/cpumap.c:120
      #4 0x5625e5326915 in cpu_map__new util/cpumap.c:135
      #5 0x5625e517b355 in test__openat_syscall_event_on_all_cpus tests/openat-syscall-all-cpus.c:36
      #6 0x5625e51528e6 in run_test tests/builtin-test.c:358
      #7 0x5625e5152baf in test_and_print tests/builtin-test.c:388
      #8 0x5625e51543fe in __cmd_test tests/builtin-test.c:583
      #9 0x5625e515572f in cmd_test tests/builtin-test.c:722
      #10 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
      #11 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
      #12 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
      #13 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520
      #14 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fixes: f30a79b012e5 ("perf tools: Add reference counting for cpu_map object")
Link: http://lkml.kernel.org/r/20190316080556.3075-15-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf evsel: Free evsel->counts in perf_evsel__exit()

Using gcc's ASan, Changbin reports:

  =================================================================
  ==7494==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 48 byte(s) in 1 object(s) allocated from:
      #0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138)
      #1 0x5625e5330a5e in zalloc util/util.h:23
      #2 0x5625e5330a9b in perf_counts__new util/counts.c:10
      #3 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47
      #4 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505
      #5 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347
      #6 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47
      #7 0x5625e51528e6 in run_test tests/builtin-test.c:358
      #8 0x5625e5152baf in test_and_print tests/builtin-test.c:388
      #9 0x5625e51543fe in __cmd_test tests/builtin-test.c:583
      #10 0x5625e515572f in cmd_test tests/builtin-test.c:722
      #11 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
      #12 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
      #13 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
      #14 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520
      #15 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

  Indirect leak of 72 byte(s) in 1 object(s) allocated from:
      #0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138)
      #1 0x5625e532560d in zalloc util/util.h:23
      #2 0x5625e532566b in xyarray__new util/xyarray.c:10
      #3 0x5625e5330aba in perf_counts__new util/counts.c:15
      #4 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47
      #5 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505
      #6 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347
      #7 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47
      #8 0x5625e51528e6 in run_test tests/builtin-test.c:358
      #9 0x5625e5152baf in test_and_print tests/builtin-test.c:388
      #10 0x5625e51543fe in __cmd_test tests/builtin-test.c:583
      #11 0x5625e515572f in cmd_test tests/builtin-test.c:722
      #12 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
      #13 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
      #14 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
      #15 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520
      #16 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

His patch took care of evsel->prev_raw_counts, but the above backtraces
are about evsel->counts, so fix that instead.

Reported-by: Changbin Du <changbin.du@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lkml.kernel.org/n/tip-hd1x13g59f0nuhe4anxhsmfp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf top: Fix global-buffer-overflow issue

The array str[] should have six elements.

  =================================================================
  ==4322==ERROR: AddressSanitizer: global-buffer-overflow on address 0x56463844e300 at pc 0x564637e7ad0d bp 0x7f30c8c89d10 sp 0x7f30c8c89d00
  READ of size 8 at 0x56463844e300 thread T9
      #0 0x564637e7ad0c in __ordered_events__flush util/ordered-events.c:316
      #1 0x564637e7b0e4 in ordered_events__flush util/ordered-events.c:338
      #2 0x564637c6a57d in process_thread /home/changbin/work/linux/tools/perf/builtin-top.c:1073
      #3 0x7f30d173a163 in start_thread (/lib/x86_64-linux-gnu/libpthread.so.0+0x8163)
      #4 0x7f30cfffbdee in __clone (/lib/x86_64-linux-gnu/libc.so.6+0x11adee)

  0x56463844e300 is located 32 bytes to the left of global variable 'flags' defined in 'util/trace-event-parse.c:229:26' (0x56463844e320) of size 192
  0x56463844e300 is located 0 bytes to the right of global variable 'str' defined in 'util/ordered-events.c:268:28' (0x56463844e2e0) of size 32
  SUMMARY: AddressSanitizer: global-buffer-overflow util/ordered-events.c:316 in __ordered_events__flush
  Shadow bytes around the buggy address:
    0x0ac947081c10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ac947081c20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ac947081c30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ac947081c40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ac947081c50: 00 00 00 00 00 00 00 00 f9 f9 f9 f9 00 00 00 00
  =>0x0ac947081c60:[f9]f9 f9 f9 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ac947081c70: 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9 f9 f9
    0x0ac947081c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ac947081c90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ac947081ca0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ac947081cb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  Shadow byte legend (one shadow byte represents 8 application bytes):
    Addressable:           00
    Partially addressable: 01 02 03 04 05 06 07
    Heap left redzone:       fa
    Freed heap region:       fd
    Stack left redzone:      f1
    Stack mid redzone:       f2
    Stack right redzone:     f3
    Stack after return:      f5
    Stack use after scope:   f8
    Global redzone:          f9
    Global init order:       f6
    Poisoned by user:        f7
    Container overflow:      fc
    Array cookie:            ac
    Intra object redzone:    bb
    ASan internal:           fe
    Left alloca redzone:     ca
    Right alloca redzone:    cb
  Thread T9 created by T0 here:
      #0 0x7f30d179de5f in __interceptor_pthread_create (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x4ae5f)
      #1 0x564637c6b954 in __cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1253
      #2 0x564637c7173c in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1642
      #3 0x564637d85038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
      #4 0x564637d85577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
      #5 0x564637d8597b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
      #6 0x564637d860e9 in main /home/changbin/work/linux/tools/perf/perf.c:520
      #7 0x7f30cff0509a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Fixes: 16c66bc167cc ("perf top: Add processing thread")
Fixes: 68ca5d07de20 ("perf ordered_events: Add ordered_events__flush_time interface")
Link: http://lkml.kernel.org/r/20190316080556.3075-13-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf maps: Purge all maps from the 'names' tree

Add function __maps__purge_names() to purge all maps from the names
tree.  We need to cleanup the names tree in maps__exit().

Detected with gcc's ASan.

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fixes: 1e6285699b30 ("perf symbols: Fix slowness due to -ffunction-section")
Link: http://lkml.kernel.org/r/20190316080556.3075-12-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf map: Remove map from 'names' tree in __maps__remove()

There are two trees for each map inserted by maps__insert(), so remove
it from the 'names' tree in __maps__remove().

Detected with gcc's ASan.

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fixes: 1e6285699b30 ("perf symbols: Fix slowness due to -ffunction-section")
Link: http://lkml.kernel.org/r/20190316080556.3075-11-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hist: Add missing map__put() in error case

We need to map__put() before returning from failure of
sample__resolve_callchain().

Detected with gcc's ASan.

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fixes: 9c68ae98c6f7 ("perf callchain: Reference count maps")
Link: http://lkml.kernel.org/r/20190316080556.3075-10-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf top: Fix error handling in cmd_top()

We should go to the cleanup path, to avoid leaks, detected using gcc's
ASan.

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20190316080556.3075-9-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf top: Delete the evlist before perf_session, fixing heap-use-after-free issue

The evlist should be destroyed before the perf session.

Detected with gcc's ASan:

  =================================================================
  ==27350==ERROR: AddressSanitizer: heap-use-after-free on address 0x62b000002e38 at pc 0x5611da276999 bp 0x7ffce8f1d1a0 sp 0x7ffce8f1d190
  WRITE of size 8 at 0x62b000002e38 thread T0
      #0 0x5611da276998 in __list_del /home/work/linux/tools/include/linux/list.h:89
      #1 0x5611da276d4a in __list_del_entry /home/work/linux/tools/include/linux/list.h:102
      #2 0x5611da276e77 in list_del_init /home/work/linux/tools/include/linux/list.h:145
      #3 0x5611da2781cd in thread__put util/thread.c:130
      #4 0x5611da2cc0a8 in __thread__zput util/thread.h:68
      #5 0x5611da2d2dcb in hist_entry__delete util/hist.c:1148
      #6 0x5611da2cdf91 in hists__delete_entry util/hist.c:337
      #7 0x5611da2ce19e in hists__delete_entries util/hist.c:365
      #8 0x5611da2db2ab in hists__delete_all_entries util/hist.c:2639
      #9 0x5611da2db325 in hists_evsel__exit util/hist.c:2651
      #10 0x5611da1c5352 in perf_evsel__exit util/evsel.c:1304
      #11 0x5611da1c5390 in perf_evsel__delete util/evsel.c:1309
      #12 0x5611da1b35f0 in perf_evlist__purge util/evlist.c:124
      #13 0x5611da1b38e2 in perf_evlist__delete util/evlist.c:148
      #14 0x5611da069781 in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1645
      #15 0x5611da17d038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
      #16 0x5611da17d577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
      #17 0x5611da17d97b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
      #18 0x5611da17e0e9 in main /home/changbin/work/linux/tools/perf/perf.c:520
      #19 0x7fdcc970f09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)
      #20 0x5611d9ff35c9 in _start (/home/work/linux/tools/perf/perf+0x3e95c9)

  0x62b000002e38 is located 11320 bytes inside of 27448-byte region [0x62b000000200,0x62b000006d38)
  freed by thread T0 here:
      #0 0x7fdccb04ab70 in free (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedb70)
      #1 0x5611da260df4 in perf_session__delete util/session.c:201
      #2 0x5611da063de5 in __cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1300
      #3 0x5611da06973c in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1642
      #4 0x5611da17d038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
      #5 0x5611da17d577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
      #6 0x5611da17d97b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
      #7 0x5611da17e0e9 in main /home/changbin/work/linux/tools/perf/perf.c:520
      #8 0x7fdcc970f09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

  previously allocated by thread T0 here:
      #0 0x7fdccb04b138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138)
      #1 0x5611da26010c in zalloc util/util.h:23
      #2 0x5611da260824 in perf_session__new util/session.c:118
      #3 0x5611da0633a6 in __cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1192
      #4 0x5611da06973c in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1642
      #5 0x5611da17d038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
      #6 0x5611da17d577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
      #7 0x5611da17d97b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
      #8 0x5611da17e0e9 in main /home/changbin/work/linux/tools/perf/perf.c:520
      #9 0x7fdcc970f09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

  SUMMARY: AddressSanitizer: heap-use-after-free /home/work/linux/tools/include/linux/list.h:89 in __list_del
  Shadow bytes around the buggy address:
    0x0c567fff8570: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
    0x0c567fff8580: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
    0x0c567fff8590: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
    0x0c567fff85a0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
    0x0c567fff85b0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
  =>0x0c567fff85c0: fd fd fd fd fd fd fd[fd]fd fd fd fd fd fd fd fd
    0x0c567fff85d0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
    0x0c567fff85e0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
    0x0c567fff85f0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
    0x0c567fff8600: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
    0x0c567fff8610: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
  Shadow byte legend (one shadow byte represents 8 application bytes):
    Addressable:           00
    Partially addressable: 01 02 03 04 05 06 07
    Heap left redzone:       fa
    Freed heap region:       fd
    Stack left redzone:      f1
    Stack mid redzone:       f2
    Stack right redzone:     f3
    Stack after return:      f5
    Stack use after scope:   f8
    Global redzone:          f9
    Global init order:       f6
    Poisoned by user:        f7
    Container overflow:      fc
    Array cookie:            ac
    Intra object redzone:    bb
    ASan internal:           fe
    Left alloca redzone:     ca
    Right alloca redzone:    cb
  ==27350==ABORTING

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20190316080556.3075-8-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf build-id: Fix memory leak in print_sdt_events()

Detected with gcc's ASan:

  Direct leak of 4356 byte(s) in 120 object(s) allocated from:
      #0 0x7ff1a2b5a070 in __interceptor_strdup (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x3b070)
      #1 0x55719aef4814 in build_id_cache__origname util/build-id.c:215
      #2 0x55719af649b6 in print_sdt_events util/parse-events.c:2339
      #3 0x55719af66272 in print_events util/parse-events.c:2542
      #4 0x55719ad1ecaa in cmd_list /home/changbin/work/linux/tools/perf/builtin-list.c:58
      #5 0x55719aec745d in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
      #6 0x55719aec7d1a in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
      #7 0x55719aec8184 in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
      #8 0x55719aeca41a in main /home/changbin/work/linux/tools/perf/perf.c:520
      #9 0x7ff1a07ae09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fixes: 40218daea1db ("perf list: Show SDT and pre-cached events")
Link: http://lkml.kernel.org/r/20190316080556.3075-7-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf config: Fix a memory leak in collect_config()

Detected with gcc's ASan:

  Direct leak of 66 byte(s) in 5 object(s) allocated from:
      #0 0x7ff3b1f32070 in __interceptor_strdup (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x3b070)
      #1 0x560c8761034d in collect_config util/config.c:597
      #2 0x560c8760d9cb in get_value util/config.c:169
      #3 0x560c8760dfd7 in perf_parse_file util/config.c:285
      #4 0x560c8760e0d2 in perf_config_from_file util/config.c:476
      #5 0x560c876108fd in perf_config_set__init util/config.c:661
      #6 0x560c87610c72 in perf_config_set__new util/config.c:709
      #7 0x560c87610d2f in perf_config__init util/config.c:718
      #8 0x560c87610e5d in perf_config util/config.c:730
      #9 0x560c875ddea0 in main /home/changbin/work/linux/tools/perf/perf.c:442
      #10 0x7ff3afb8609a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Fixes: 20105ca1240c ("perf config: Introduce perf_config_set class")
Link: http://lkml.kernel.org/r/20190316080556.3075-6-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf config: Fix an error in the config template documentation

The option 'sort-order' should be 'sort_order'.

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fixes: 893c5c798be9 ("perf config: Show default report configuration in example and docs")
Link: http://lkml.kernel.org/r/20190316080556.3075-5-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix errors under optimization level '-Og'

Optimization level '-Og' offers a reasonable level of optimization while
maintaining fast compilation and a good debugging experience. This patch
tries to make it work.

  $ make DEBUG=1 EXTRA_CFLAGS='-Og'
  bench/epoll-ctl.c: In function ‘do_threads’:
  bench/epoll-ctl.c:274:9: error: ‘ret’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
    return ret;
           ^~~
  ...

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20190316080556.3075-4-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf list: Don't forget to drop the reference to the allocated thread_map

Detected via gcc's ASan:

  Direct leak of 2048 byte(s) in 64 object(s) allocated from:
    6     #0 0x7f606512e370 in __interceptor_realloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee370)
    7     #1 0x556b0f1d7ddd in thread_map__realloc util/thread_map.c:43
    8     #2 0x556b0f1d84c7 in thread_map__new_by_tid util/thread_map.c:85
    9     #3 0x556b0f0e045e in is_event_supported util/parse-events.c:2250
   10     #4 0x556b0f0e1aa1 in print_hwcache_events util/parse-events.c:2382
   11     #5 0x556b0f0e3231 in print_events util/parse-events.c:2514
   12     #6 0x556b0ee0a66e in cmd_list /home/changbin/work/linux/tools/perf/builtin-list.c:58
   13     #7 0x556b0f01e0ae in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
   14     #8 0x556b0f01e859 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
   15     #9 0x556b0f01edc8 in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
   16     #10 0x556b0f01f71f in main /home/changbin/work/linux/tools/perf/perf.c:520
   17     #11 0x7f6062ccf09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fixes: 89896051f8da ("perf tools: Do not put a variable sized type not at the end of a struct")
Link: http://lkml.kernel.org/r/20190316080556.3075-3-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add doc about how to build perf with Asan and UBSan

AddressSanitizer (or ASan) and UndefinedBehaviorSanitizer (or UBSan) are
very useful tools to detect program bugs:

 - AddressSanitizer (or ASan) is a GCC feature that detects memory
   corruption bugs such as buffer overflows and memory leaks.

 - UndefinedBehaviorSanitizer (or UBSan) is a fast undefined behavior
   detector supported by GCC. UBSan detects undefined behaviors of programs
   at runtime.

This patch adds a document about how to use them on perf. Later patches will fix
some of the issues disclosed by them.

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20190316080556.3075-2-changbin.du@gmail.com
[ Make some changes based on comments made by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf vendor events: Remove P8 HW events which are not supported

This patch is to remove following hardware events from JSON file which
are not supported on POWER8.

  pm_co_disp_fail
  pm_co_tm_sc_footprint
  pm_iside_disp
  pm_iside_disp_fail
  pm_iside_disp_fail_other
  pm_iside_mru_touch
  pm_l2_castout_mod
  pm_l2_castout_shr
  pm_l2_dc_inv
  pm_l2_disp_all_l2miss
  pm_l2_grp_guess_correct
  pm_l2_grp_guess_wrong
  pm_l2_ic_inv
  pm_l2_inst
  pm_l2_inst_miss
  pm_l2_ld
  pm_l2_ld_disp
  pm_l2_ld_hit
  pm_l2_ld_miss
  pm_l2_loc_guess_correct
  pm_l2_loc_guess_wrong
  pm_l2_rcld_disp
  pm_l2_rcld_disp_fail_addr
  pm_l2_rcld_disp_fail_other
  pm_l2_rcst_disp
  pm_l2_rcst_disp_fail_addr
  pm_l2_rcst_disp_fail_other
  pm_l2_rc_st_done
  pm_l2_rty_ld
  pm_l2_sn_m_rd_done
  pm_l2_sn_m_wr_done
  pm_l2_sn_sx_i_done
  pm_l2_st_disp
  pm_l2_st_hit
  pm_l2_sys_guess_correct
  pm_l2_sys_guess_wrong
  pm_l2_sys_pump
  pm_l3_ci_hit
  pm_l3_ci_miss
  pm_l3_cinj
  pm_l3_co
  pm_l3_co_lco
  pm_l3_grp_guess_correct
  pm_l3_grp_guess_wrong_high
  pm_l3_grp_guess_wrong_low
  pm_l3_hit
  pm_l3_l2_co_hit
  pm_l3_l2_co_miss
  pm_l3_lat_ci_hit
  pm_l3_lat_ci_miss
  pm_l3_ld_hit
  pm_l3_ld_miss
  pm_l3_loc_guess_correct
  pm_l3_loc_guess_wrong
  pm_l3_miss
  pm_l3_p0_co_l31
  pm_l3_p0_co_mem
  pm_l3_p0_co_rty
  pm_l3_p0_grp_pump
  pm_l3_p0_lco_data
  pm_l3_p0_lco_no_data
  pm_l3_p0_lco_rty
  pm_l3_p0_node_pump
  pm_l3_p0_pf_rty
  pm_l3_p0_sn_hit
  pm_l3_p0_sn_inv
  pm_l3_p0_sn_miss
  pm_l3_p0_sys_pump
  pm_l3_p1_co_l31
  pm_l3_p1_co_mem
  pm_l3_p1_co_rty
  pm_l3_p1_grp_pump
  pm_l3_p1_lco_data
  pm_l3_p1_lco_no_data
  pm_l3_p1_lco_rty
  pm_l3_p1_node_pump
  pm_l3_p1_pf_rty
  pm_l3_p1_sn_hit
  pm_l3_p1_sn_inv
  pm_l3_p1_sn_miss
  pm_l3_p1_sys_pump
  pm_l3_pf_hit_l3
  pm_l3_sys_guess_correct
  pm_l3_sys_guess_wrong
  pm_l3_trans_pf
  pm_l3_wi0_busy
  pm_l3_wi_usage
  pm_non_tm_rst_sc
  pm_rd_clearing_sc
  pm_rd_forming_sc
  pm_rd_hit_pf
  pm_snp_tm_hit_m
  pm_snp_tm_hit_t
  pm_st_caused_fail
  pm_tm_cam_overflow
  pm_tm_cap_overflow
  pm_tm_fav_caused_fail
  pm_tm_ld_caused_fail
  pm_tm_ld_conf
  pm_tm_rst_sc
  pm_tm_sc_co
  pm_tm_st_caused_fail
  pm_tm_st_conf

Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Fixes: 2a81fa3bb5ed ("perf vendor events: Add power8 PMU events")
Link: http://lkml.kernel.org/r/154953186583.11022.14819560028300370163.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf stat: Improve scaling

The multiplexing scaling in perf stat mysteriously adds 0.5 to the
value. This dates back to the original perf tool. Other scaling code
doesn't use that strange convention. Remove the extra 0.5.

Before:

$ perf stat -e 'cycles,cycles,cycles,cycles,cycles,cycles' grep -rq foo

 Performance counter stats for 'grep -rq foo':

         6,403,580      cycles                                                        (81.62%)
         6,404,341      cycles                                                        (81.64%)
         6,402,983      cycles                                                        (81.62%)
         6,399,941      cycles                                                        (81.63%)
         6,399,451      cycles                                                        (81.62%)
         6,436,105      cycles                                                        (91.87%)

       0.005843799 seconds time elapsed

       0.002905000 seconds user
       0.002902000 seconds sys

After:

$ perf stat -e 'cycles,cycles,cycles,cycles,cycles,cycles' grep -rq foo

 Performance counter stats for 'grep -rq foo':

         6,422,704      cycles                                                        (81.68%)
         6,401,842      cycles                                                        (81.68%)
         6,398,432      cycles                                                        (81.68%)
         6,397,098      cycles                                                        (81.68%)
         6,396,074      cycles                                                        (81.67%)
         6,434,980      cycles                                                        (91.62%)

       0.005884437 seconds time elapsed

       0.003580000 seconds user
       0.002356000 seconds sys

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
LPU-Reference: 20190314225002.30108-10-andi@firstfloor.org
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf stat: Fix --no-scale

The -c option to enable multiplex scaling has been useless for quite
some time because scaling is default.

It's only useful as --no-scale to disable scaling. But the non scaling
code path has bitrotted and doesn't print anything because perf output
code relies on value run/ena information.

Also even when we don't want to scale a value it's still useful to show
its multiplex percentage.

This patch:
  - Fixes help and documentation to show --no-scale instead of -c
  - Removes -c, only keeps the long option because -c doesn't support negatives.
  - Enables running/enabled even with --no-scale
  - And fixes some other problems in the no-scale output.

Before:

  $ perf stat --no-scale -e cycles true

   Performance counter stats for 'true':

       <not counted>      cycles

         0.000984154 seconds time elapsed

After:

  $ ./perf stat --no-scale -e cycles true

   Performance counter stats for 'true':

             706,070      cycles

         0.001219821 seconds time elapsed

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LPU-Reference: 20190314225002.30108-9-andi@firstfloor.org
Link: https://lkml.kernel.org/n/tip-xggjvwcdaj2aqy8ib3i4b1g6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf script: Support relative time

When comparing time stamps in 'perf script' traces it can be annoying to
work with the full perf time stamps.

Add a --reltime option that displays time stamps relative to the trace
start to make it easier to read the traces.

Note: not currently supported for --time. Report an error in this
case.

Before:

  % perf script
      swapper 0 [000] 245402.891216:    1 cycles:ppp: ffffffffa0068814 native_write_msr+0x4 ([kernel.kallsyms])
      swapper 0 [000] 245402.891223:    1 cycles:ppp: ffffffffa0068814 native_write_msr+0x4 ([kernel.kallsyms])
      swapper 0 [000] 245402.891227:    5 cycles:ppp: ffffffffa0068814 native_write_msr+0x4 ([kernel.kallsyms])
      swapper 0 [000] 245402.891231:   41 cycles:ppp: ffffffffa0068816 native_write_msr+0x6 ([kernel.kallsyms])
      swapper 0 [000] 245402.891235:  355 cycles:ppp: ffffffffa000dd51 intel_bts_enable_local+0x21 ([kernel.kallsyms])
      swapper 0 [000] 245402.891239: 3084 cycles:ppp: ffffffffa0a0150a end_repeat_nmi+0x48 ([kernel.kallsyms])

After:

  % perf script --reltime

      swapper 0 [000]     0.000000:    1 cycles:ppp: ffffffffa0068814 native_write_msr+0x4 ([kernel.kallsyms])
      swapper 0 [000]     0.000006:    1 cycles:ppp: ffffffffa0068814 native_write_msr+0x4 ([kernel.kallsyms])
      swapper 0 [000]     0.000010:    5 cycles:ppp: ffffffffa0068814 native_write_msr+0x4 ([kernel.kallsyms])
      swapper 0 [000]     0.000014:   41 cycles:ppp: ffffffffa0068816 native_write_msr+0x6 ([kernel.kallsyms])
      swapper 0 [000]     0.000018:  355 cycles:ppp: ffffffffa000dd51 intel_bts_enable_local+0x21 ([kernel.kallsyms])
      swapper 0 [000]     0.000022: 3084 cycles:ppp: ffffffffa0a0150a end_repeat_nmi+0x48 ([kernel.kallsyms])

Committer notes:

Do not use 'time' as the name of a variable, as this breaks the build on
older glibcs:

  cc1: warnings being treated as errors
  builtin-script.c: In function 'perf_sample__fprintf_start':
  builtin-script.c:691: warning: declaration of 'time' shadows a global declaration
  /usr/include/time.h:187: warning: shadowed declaration is here

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
LPU-Reference: 20190314225002.30108-8-andi@firstfloor.org
Link: https://lkml.kernel.org/n/tip-bpahyi6pr9r399mvihu65fvc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf report: Indicate JITed code better in report

Print [TID] tid %d instead of the crypted /tmp/perf-%d.map default.

% cat >loop.java
  public class loop {
          public static void main(String[] args)
          {
                  for (;;);
          }
  }
  ^D
  % javac loop.java
  % perf record java loop
  ^C

Before:

  % perf report --stdio
  ...
      56.09%  java     perf-34724.map      [.] 0x00007fd5bd021896
      19.12%  java     perf-34724.map      [.] 0x00007fd5bd021887
       9.79%  java     perf-34724.map      [.] 0x00007fd5bd021783
       8.97%  java     perf-34724.map      [.] 0x00007fd5bd02175b

After:

  % perf report --stdio
  ...
      56.09%  java     [JIT] tid 34724     [.] 0x00007fd5bd021896
      19.12%  java     [JIT] tid 34724     [.] 0x00007fd5bd021887
       9.79%  java     [JIT] tid 34724     [.] 0x00007fd5bd021783
       8.97%  java     [JIT] tid 34724     [.] 0x00007fd5bd02175b

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LPU-Reference: 20190314225002.30108-7-andi@firstfloor.org
Link: https://lkml.kernel.org/n/tip-r17l6py9g0sezb7mi1f286gt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf report: Show all sort keys in help output

Show all the supported sort keys in the command line help output, so
that it's not needed to refer to the manpage.

Before:

  % perf report -h
  ...
       -s, --sort <key[,key2...]>
                            sort by key(s): pid, comm, dso, symbol, parent, cpu, srcline, ... Please refer the man page for the complete list.

After:

  % perf report -h
  ...
      -s, --sort <key[,key2...]>
                            sort by key(s): overhead overhead_sys overhead_us overhead_guest_sys overhead_guest_us overhead_children sample period pid comm dso symbol parent cpu ...

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
LPU-Reference: 20190314225002.30108-5-andi@firstfloor.org
Link: https://lkml.kernel.org/n/tip-9r3uz2ch4izoi1uln3f889co@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf record: Clarify help for --switch-output

The help description for --switch-output looks like there are multiple
comma separated fields. But it's actually a choice of different options.
Make it clear and less confusing.

Before:

  % perf record -h
  ...
          --switch-output[=<signal,size,time>]
                            Switch output when receive SIGUSR2 or cross size,time threshold

After:

  % perf record -h
  ...

          --switch-output[=<signal or size[BKMG] or time[smhd]>]
                            Switch output when receiving SIGUSR2 (signal) or cross a size or time threshold

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
LPU-Reference: 20190314225002.30108-4-andi@firstfloor.org
Link: https://lkml.kernel.org/n/tip-9yecyuha04nyg8toyd1b2pgi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf record: Allow to limit number of reported perf.data files

When doing long term recording and waiting for some event to snapshot
on, we often only care about the last minute or so.

The --switch-output command line option supports rotating the perf.data
file when the size exceeds a threshold. But the disk would still be
filled with unnecessary old files.

Add a new option to only keep a number of rotated files, so that the
disk space usage can be limited.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
LPU-Reference: 20190314225002.30108-3-andi@firstfloor.org
Link: https://lkml.kernel.org/n/tip-y5u2lik0ragt4vlktz6qc9ks@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf list: Filter metrics too

When a filter is specified on the command line, filter the metrics too.

Before:

  % perf list foo
  List of pre-defined events (to be used in -e):

  Metric Groups:

  DSB:
    DSB_Coverage
         [Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)]
  ... more metrics ...

After:

% perf list foo

  List of pre-defined events (to be used in -e):

  Metric Groups:

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
LPU-Reference: 20190314225002.30108-1-andi@firstfloor.org
Link: https://lkml.kernel.org/n/tip-1y8oi2s8c4jhjtykgs5zvda1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools lib bpf: Fix the build by adding a missing stdarg.h include

The libbpf_print_fn_t typedef uses va_list without including the header
where that type is defined, stdarg.h, breaking in places where we're
unlucky for that type not to be already defined by some previously
included header.

Noticed while building on fedora 24 cross building tools/perf to the ARC
architecture using the uClibc C library:

  28 fedora:24-x-ARC-uClibc   : FAIL arc-linux-gcc (ARCompact ISA Linux uClibc toolchain 2017.09-rc2) 7.1.1 20170710

    CC       /tmp/build/perf/tests/llvm.o
  In file included from tests/llvm.c:3:0:
  /git/linux/tools/lib/bpf/libbpf.h:57:20: error: unknown type name 'va_list'
        const char *, va_list ap);
                      ^~~~~~~
  /git/linux/tools/lib/bpf/libbpf.h:59:34: error: unknown type name 'libbpf_print_fn_t'
   LIBBPF_API void libbpf_set_print(libbpf_print_fn_t fn);
                                    ^~~~~~~~~~~~~~~~~
  mv: cannot stat '/tmp/build/perf/tests/.llvm.o.tmp': No such file or directory

Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Yonghong Song <yhs@fb.com>
Fixes: a8a1f7d09cfc ("libbpf: fix libbpf_print")
Link: https://lkml.kernel.org/n/tip-5270n2quu2gqz22o7itfdx00@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools report: Add custom scripts to script menu

Add a way to define custom scripts through ~/.perfconfig, which are then
added to the scripts menu. The scripts get the same arguments as 'perf
script', in particular -i, --cpu, --tid.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190311144502.15423-10-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf ui browser: Fix ui popup argv browser for many entries

Fix the argv ui browser code to correctly display more entries than fit
on the screen without crashing. The problem was some type confusion with
pointer types in the ->seek function. Do the argv arithmetic correctly
with char ** pointers. Also add some asserts to find overruns and limit
the display function correctly.

Then finally remove a workaround for this in the res sample browser.

Committer testing:

1) Resize the x terminal to have just some 5 lines

2) Use 'perf report --samples 1' to activate the sample browser options
   in the menu

3) Press ENTER, this will cause the crash:

  # perf report --samples 1
  perf: Segmentation fault
  -------- backtrace --------
  perf[0x5a514a]
  /lib64/libc.so.6(+0x385bf)[0x7f27281b55bf]
  /lib64/libc.so.6(+0x161a67)[0x7f27282dea67]
  /lib64/libslang.so.2(SLsmg_write_wrapped_string+0x82)[0x7f272874a0b2]
  perf(ui_browser__argv_refresh+0x77)[0x5939a7]
  perf[0x5924cc]
  perf(ui_browser__run+0x39)[0x593449]
  perf(ui__popup_menu+0x83)[0x5a5263]
  perf[0x59f421]
  perf(perf_evlist__tui_browse_hists+0x3a0)[0x5a3780]
  perf(cmd_report+0x2746)[0x447136]
  perf[0x4a95fe]
  perf(main+0x61c)[0x42dc6c]
  /lib64/libc.so.6(__libc_start_main+0xf2)[0x7f27281a1412]
  perf(_start+0x2d)[0x42de9d]
  #

After applying this patch no crash takes place in such situation.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190311144502.15423-12-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf script: Add array bound checking to list_scripts

Don't overflow array when the scripts directory is too large, or the
script file name is too long.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190311144502.15423-11-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add some new tips describing the new options

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190311144502.15423-9-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf report: Implement browsing of individual samples

Now 'perf report' can show whole time periods with 'perf script', but
the user still has to find individual samples of interest manually.

It would be expensive and complicated to search for the right samples in
the whole perf file. Typically users only need to look at a small number
of samples for useful analysis.

Also the full scripts tend to show samples of all CPUs and all threads
mixed up, which can be very confusing on larger systems.

Add a new --samples option to save a small random number of samples per
hist entry.

Use a reservoir sample technique to select a representatve number of
samples.

Then allow browsing the samples using 'perf script' as part of the hist
entry context menu. This automatically adds the right filters, so only
the thread or cpu of the sample is displayed. Then we use less' search
functionality to directly jump the to the time stamp of the selected
sample.

It uses different menus for assembler and source display.  Assembler
needs xed installed and source needs debuginfo.

Currently it only supports as many samples as fit on the screen due to
some limitations in the slang ui code.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190311174605.GA29294@tassilo.jf.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf report: Support builtin perf script in scripts menu

The scripts menu traditionally only showed custom perf scripts.

Allow to run standard perf script with useful default options too.

- Normal perf script
- perf script with assembler (needs xed installed)
- perf script with source code output (needs debuginfo)
- perf script with custom arguments

Then we automatically select the right options to display the
information in the perf.data file.

For example with -b display branch contexts.

It's not easily possible to check for xed's existence in advance.  perf
script usually gives sensible error messages when it's not available.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190311144502.15423-7-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf report: Support running scripts for current time range

When using the time sort key, add new context menus to run scripts for
only the currently selected time range. Compute the correct range for
the selection add pass it as the --time option to perf script.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190311144502.15423-6-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf report: Support time sort key

Add a time sort key to perf report to display samples for different time
quantums separately. This allows easier analysis of workloads that
change over time, and also will allow looking at the context of samples.

% perf record ...
% perf report --sort time,overhead,symbol --time-quantum 1ms --stdio
...
     0.67%  277061.87300  [.] _dl_start
     0.50%  277061.87300  [.] f1
     0.50%  277061.87300  [.] f2
     0.33%  277061.87300  [.] main
     0.29%  277061.87300  [.] _dl_lookup_symbol_x
     0.29%  277061.87300  [.] dl_main
     0.29%  277061.87300  [.] do_lookup_x
     0.17%  277061.87300  [.] _dl_debug_initialize
     0.17%  277061.87300  [.] _dl_init_paths
     0.08%  277061.87300  [.] check_match
     0.04%  277061.87300  [.] _dl_count_modids
     1.33%  277061.87400  [.] f1
     1.33%  277061.87400  [.] f2
     1.33%  277061.87400  [.] main
     1.17%  277061.87500  [.] main
     1.08%  277061.87500  [.] f1
     1.08%  277061.87500  [.] f2
     1.00%  277061.87600  [.] main
     0.83%  277061.87600  [.] f1
     0.83%  277061.87600  [.] f2
     1.00%  277061.87700  [.] main

Committer notes:

Rename 'time' argument to hist_time() to htime to overcome this in older
distros:

  cc1: warnings being treated as errors
  util/hist.c: In function 'hist_time':
  util/hist.c:251: error: declaration of 'time' shadows a global declaration
  /usr/include/time.h:186: error: shadowed declaration is here

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190311144502.15423-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf script: Filter COMM/FORK/.. events by CPU

The --cpu option only filtered samples. Filter other perf events, such
as COMM, FORK, SWITCH by the CPU too.

Reported-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190311144502.15423-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools headers uapi: Update linux/in.h copy

To get the changes in:

  4effd28c1245 ("bridge: join all-snoopers multicast address")

That do not generate any changes in tools/ use of this file.

Silences this tools/perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h'
  diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Lüssing <linus.luessing@c0d3.blue>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ifpl634035266ho6wxuqgo81@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools headers uapi: Sync copy of asm-generic/unistd.h with the kernel sources

To get the changes in:

  c8ce48f06503 ("asm-generic: Make time32 syscall numbers optional")

Silencing these tools/perf build warnings:

  Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/unistd.h' differs from latest version at 'arch/arm64/include/uapi/asm/unistd.h'
  diff -u tools/arch/arm64/include/uapi/asm/unistd.h arch/arm64/include/uapi/asm/unistd.h
  Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
  diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h

Test built it under the ubuntu:14.04.4-x-linaro-arm64 cross build
environment and looked at the syscall table at
/tmp/build/perf/arch/arm64/include/generated/asm/syscalls.c, looks ok.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: https://lkml.kernel.org/n/tip-e4w7ngsmkq48bd6st52ty2kb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Update x86's syscall_64.tbl, no change in tools/perf behaviour

To pick the changes in 7948450d4556 ("x86/x32: use time64 versions of
sigtimedwait and recvmmsg"), that doesn't cause any change in behaviour
in tools/perf/ as it deals just with the x32 entries.

This silences this tools/perf build warning:

  Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
  diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-mqpvshayeqidlulx5qpioa59@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf script python: Add printdate function to SQL exporters

Introduce a printdate function to eliminate the repetitive use of
datetime.datetime.today() in the SQL exporting scripts.

Signed-off-by: Tony Jones <tonyj@suse.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/r/20190309000518.2438-5-tonyj@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf script python: Add Python3 support to export-to-sqlite.py

Support both Python2 and Python3 in the export-to-sqlite.py script

The use of 'from __future__' implies the minimum supported Python2 version
is now v2.6

Signed-off-by: Tony Jones <tonyj@suse.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/r/20190309000518.2438-4-tonyj@suse.de
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf script python: Add Python3 support to export-to-postgresql.py

Support both Python2 and Python3 in the export-to-postgresql.py script.

The use of 'from __future__' implies the minimum supported Python2 version
is now v2.6

Signed-off-by: Tony Jones <tonyj@suse.de>
Link: http://lkml.kernel.org/r/20190309000518.2438-3-tonyj@suse.de
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf script python: Add Python3 support to exported-sql-viewer.py

Support both Python2 and Python3 in the exported-sql-viewer.py script.

The use of 'from __future__' implies the minimum supported Python2 version
is now v2.6

Signed-off-by: Tony Jones <tonyj@suse.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/r/20190309000518.2438-2-tonyj@suse.de
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf report: Use less for scripts output

The UI viewer for scripts output has a lot of limitations: limited size,
no search or save function, slow, and various other issues.

Just use 'less' to display directly on the terminal instead.

This won't work in GTK mode, but GTK doesn't support these context menus
anyways. If that is ever done could use an terminal for the output.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Feng Tang <feng.tang@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190309055628.21617-8-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf session: Add process callback to reader object

Adding callback function to reader object so callers can process data in
different ways.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190308134745.5057-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf header: Add DIR_FORMAT feature to describe directory data

The data files layout is described by HEADER_DIR_FORMAT feature.
Currently it holds only version number (1):

     uint64_t version;

The current version holds only version value (1) means that data files:

  - Follow the 'data.*' name format.

  - Contain raw events data in standard perf format as read from kernel
    (and need to be sorted)

Future versions are expected to describe different data files layout
according to special needs.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190308134745.5057-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf data: Make perf_data__size() work over directory

Make perf_data__size() return proper size for directory data, summing up
all the individual file sizes.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190308134745.5057-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf data: Add perf_data__update_dir() function

Add perf_data__update_dir() to update the size for every file within the
perf.data directory.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190308134745.5057-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf data: Don't store auxtrace index for directory data file

We can't store the auxtrace index when we store into multiple files,
because we keep only offset for it, not the file.

The auxtrace data will be processed correctly in the 'pipe' mode.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190308134745.5057-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf data: Support having perf.data stored as a directory

The caller needs to set 'struct perf_data::is_dir flag and the path will
be treated as a directory.

The 'struct perf_data::file' is initialized and open as 'path/header'
file.

Add a check to the direcory interface functions to check the is_dir flag.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190308134745.5057-2-jolsa@kernel.org
[ Be consistent on how to signal failure, i.e. use -1 and let users check errno ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf vendor events amd: perf PMU events for AMD Family 17h

Thi patch adds PMC events for AMD Family 17 CPUs as defined in [1].  It
covers events described in section: 2.1.13. Regex pattern in mapfile.csv
covers all CPUs of the family.

[1] https://support.amd.com/TechDocs/54945_PPR_Family_17h_Models_00h-0Fh.pdf

Signed-off-by: Martin Liška <mliska@suse.cz>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jon Grimm <jon.grimm@amd.com>
Cc: Martin Jambor <mjambor@suse.cz>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/r/d65873ca-e402-b198-4fe9-8c4af81258c8@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf probe: Fix getting the kernel map

Since commit 4d99e4136580 ("perf machine: Workaround missing maps for
x86 PTI entry trampolines"), perf tools has been creating more than one
kernel map, however 'perf probe' assumed there could be only one.

Fix by using machine__kernel_map() to get the main kernel map.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Cc: Xu Yu <xuyu@linux.alibaba.com>
Fixes: 4d99e4136580 ("perf machine: Workaround missing maps for x86 PTI entry trampolines")
Fixes: d83212d5dd67 ("kallsyms, x86: Export addresses of PTI entry trampolines")
Link: http://lkml.kernel.org/r/2ed432de-e904-85d2-5c36-5897ddc5b23b@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf report: Parse time quantum

Many workloads change over time. 'perf report' currently aggregates the
whole time range reported in perf.data.

This patch adds an option for a time quantum to quantisize the perf.data
over time.

This just adds the option, will be used in follow on patches for a time
sort key.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20190305144758.12397-6-andi@firstfloor.org
[ Use NSEC_PER_[MU]SEC ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf time-utils: Add utility function to print time stamps in nanoseconds

Add a utility function to print nanosecond timestamps.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20190305144758.12397-11-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf report: Support output in nanoseconds

Upcoming changes add timestamp output in perf report. Add a --ns
argument similar to perf script to support nanoseconds resolution when
needed.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20190305144758.12397-5-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf script: Support insn output for normal samples

perf script -F +insn was only working for PT traces because the PT
instruction decoder was filling in the insn/insn_len sample attributes.
Support it for non PT samples too on x86 using the existing x86
instruction decoder.

This adds some extra checking to ensure that we don't try to decode
instructions when using perf.data from a different architecture.

  % perf record -a sleep 1
  % perf script -F ip,sym,insn --xed
   ffffffff811704c9 remote_function               movl  %eax, 0x18(%rbx)
   ffffffff8100bb50 intel_bts_enable_local                retq
   ffffffff81048612 native_apic_mem_write                 movl  %esi, -0xa04000(%rdi)
   ffffffff81048612 native_apic_mem_write                 movl  %esi, -0xa04000(%rdi)
   ffffffff81048612 native_apic_mem_write                 movl  %esi, -0xa04000(%rdi)
   ffffffff810f1f79 generic_exec_single           xor %eax, %eax
   ffffffff811704c9 remote_function               movl  %eax, 0x18(%rbx)
   ffffffff8100bb34 intel_bts_enable_local                movl  0x2000(%rax), %edx
   ffffffff81048610 native_apic_mem_write                 mov %edi, %edi
  ...

Committer testing:

Before:

  # perf script -F ip,sym,insn --xed | head -5
   ffffffffa4068804 native_write_msr  addb  %al, (%rax)
   ffffffffa4068804 native_write_msr  addb  %al, (%rax)
   ffffffffa4068804 native_write_msr  addb  %al, (%rax)
   ffffffffa4068806 native_write_msr  addb  %al, (%rax)
   ffffffffa4068806 native_write_msr  addb  %al, (%rax)
  # perf script -F ip,sym,insn --xed | grep -v "addb  %al, (%rax)"
  #

After:

  # perf script -F ip,sym,insn --xed | head -5
   ffffffffa4068804 native_write_msr  wrmsr
   ffffffffa4068804 native_write_msr  wrmsr
   ffffffffa4068804 native_write_msr  wrmsr
   ffffffffa4068806 native_write_msr  nopl  %eax, (%rax,%rax,1)
   ffffffffa4068806 native_write_msr  nopl  %eax, (%rax,%rax,1)
  # perf script -F ip,sym,insn --xed | grep -v "addb  %al, (%rax)" | head -5
   ffffffffa4068804 native_write_msr  wrmsr
   ffffffffa4068804 native_write_msr  wrmsr
   ffffffffa4068804 native_write_msr  wrmsr
   ffffffffa4068806 native_write_msr  nopl  %eax, (%rax,%rax,1)
   ffffffffa4068806 native_write_msr  nopl  %eax, (%rax,%rax,1)
  #

More examples:

  # perf script -F ip,sym,insn --xed | grep -v native_write_msr | head
   ffffffffa416b90e tick_check_broadcast_expired  btq  %rax, 0x1a5f42a(%rip)
   ffffffffa4956bd0 nmi_cpu_backtrace  pushq  %r13
   ffffffffa415b95e __hrtimer_next_event_base  movq  0x18(%rax), %rdx
   ffffffffa4956bf3 nmi_cpu_backtrace  popq  %r12
   ffffffffa4171d5c smp_call_function_single  pause
   ffffffffa4956bdd nmi_cpu_backtrace  mov %ebp, %r12d
   ffffffffa4797e4d menu_select  cmp $0x190, %rax
   ffffffffa4171d5c smp_call_function_single  pause
   ffffffffa405a7d8 nmi_cpu_backtrace_handler  callq  0xffffffffa4956bd0
   ffffffffa4797f7a menu_select  shr $0x3, %rax
  #

Which matches the annotate output modulo resolving callqs:

  # perf annotate --stdio2 nmi_cpu_backtrace_handler
  Samples: 4  of event 'cycles:ppp', 4000 Hz, Event count (approx.): 35908, [percent: local period]
  nmi_cpu_backtrace_handler() /lib/modules/5.0.0+/build/vmlinux
  Percent
              Disassembly of section .text:

              ffffffff8105a7d0 <nmi_cpu_backtrace_handler>:
              nmi_cpu_backtrace_handler():
                      nmi_trigger_cpumask_backtrace(mask, exclude_self,
                                                    nmi_raise_cpu_backtrace);
              }

              static int nmi_cpu_backtrace_handler(unsigned int cmd, struct pt_regs *regs)
              {
   24.45      → callq  __fentry__
                      if (nmi_cpu_backtrace(regs))
                mov    %rsi,%rdi
   75.55      → callq  nmi_cpu_backtrace
                              return NMI_HANDLED;
                movzbl %al,%eax

                      return NMI_DONE;
              }
              ← retq
    #

  # perf annotate --stdio2 __hrtimer_next_event_base
  Samples: 4  of event 'cycles:ppp', 4000 Hz, Event count (approx.): 767977, [percent: local period]
  __hrtimer_next_event_base() /lib/modules/5.0.0+/build/vmlinux
  Percent
              Disassembly of section .text:

              ffffffff8115b910 <__hrtimer_next_event_base>:
              __hrtimer_next_event_base():

              static ktime_t __hrtimer_next_event_base(struct hrtimer_cpu_base *cpu_base,
                                                       const struct hrtimer *exclude,
                                                       unsigned int active,
                                                       ktime_t expires_next)
              {
              → callq  __fentry__
<SNIP>
          4a:   add    $0x1,%r14
   77.31        mov    0x18(%rax),%rdx
                shl    $0x6,%r14
                sub    0x38(%rbx,%r14,1),%rdx
                              if (expires < expires_next) {
                cmp    %r12,%rdx
              ↓ jge    68
<SNIP>

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20190305144758.12397-3-andi@firstfloor.org
[ Converted fetch_exe() to use the name it ended up having when merged: thread__memcpy() ]
[ archinsn.c needs the instruction decoder that is only build when CONFIG_AUXTRACE=y, fix that ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf/core: Restore mmap record type correctly

On mmap(), perf_events generates a RECORD_MMAP record and then checks
which events are interested in this record. There are currently 2
versions of mmap records: RECORD_MMAP and RECORD_MMAP2. MMAP2 is larger.
The event configuration controls which version the user level tool
accepts.

If the event->attr.mmap2=1 field then MMAP2 record is returned.  The
perf_event_mmap_output() takes care of this. It checks attr->mmap2 and
corrects the record fields before putting it in the sampling buffer of
the event.  At the end the function restores the modified MMAP record
fields.

The problem is that the function restores the size but not the type.
Thus, if a subsequent event only accepts MMAP type, then it would
instead receive an MMAP2 record with a size of MMAP record.

This patch fixes the problem by restoring the record type on exit.

Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Fixes: 13d7a2410fa6 ("perf: Add attr->mmap2 attribute to an event")
Link: http://lkml.kernel.org/r/20190307185233.225521-1-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo-5.1-20190307' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/core changes from Arnaldo Carvalho de Melo:

perf bpf:

  Arnaldo Carvalho de Melo:

  - Automatically add BTF ELF markers to 'perf trace' BPF programs, so that
    tools such as 'bpftool map dump' can pretty print map keys and values.

perf c2c:

  Jiri Olsa:

  - Fix report for empty NUMA node.

perf diff:

  Jin Yao:

  - Support --time, --cpu, --pid and --tid filter options.

perf probe:

  Arnaldo Carvalho de Melo:

  - Clarify error message about not finding kernel modules debuginfo.

perf record:

  Jiri Olsa:

  - Fixup probing for max attr.precise_ip.

perf trace:

  Arnaldo Carvalho de Melo:

  - Add missing %s lost in the 'msg_flags' recvmmsg arg when adding prefix suppression logic.

perf annotate:

  Arnaldo Carvalho de Melo:

  - Calculate the max instruction name, align column to that, removing the
    hardcoded max 6 chars and cope with instructions with names longer than that,
    such as vpmovmskb, vpcmpeqb, etc.

kernel:

  Song Liu:

  - Consider events with attr.bpf_event set as side-band.

  Gustavo A. R. Silva:

  - Mark expected switch fall-through in perf_event_parse_addr_filter().

Libraries:

  Jiri Olsa:

  - Fix leaks and double frees on error paths.

libtraceevent:

  Tony Jones:

  - Fix buffer overflow in arg_eval().

python scripting:

  Tony Jones:

  - More python3 fixes.

Trivial:

  Yang Wei:

  - Remove needless extra semicolon in clang C++ glue code.

Intel PT/BTS:

  Adrian Hunter:

  - Improve auxtrace address filter error message when there is no DSO.

  - Fix divide by zero when TSC is not available.

  - Further improvements to the export to sqlite/posgresql python scripts
    and to the GUI sqlviewer, exporting 'parent_id' so that we have enable
    the creation of call trees.

  Andi Kleen:

  - Generalize function to copy from thread addr space from intel-bts code.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/core: Mark expected switch fall-through

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

This patch fixes the following warning:

  kernel/events/core.c: In function ‘perf_event_parse_addr_filter’:
  kernel/events/core.c:9154:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
      kernel = 1;
      ~~~~~~~^~~
  kernel/events/core.c:9156:3: note: here
     case IF_SRC_FILEADDR:
     ^~~~

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/20190212205430.GA8446@embeddedor
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel/uncore: Fix client IMC events return huge result

The client IMC bandwidth events currently return very large values:

  $ perf stat -e uncore_imc/data_reads/ -e uncore_imc/data_writes/ -I 10000 -a

  10.000117222 34,788.76 MiB uncore_imc/data_reads/
  10.000117222 8.26 MiB uncore_imc/data_writes/
  20.000374584 34,842.89 MiB uncore_imc/data_reads/
  20.000374584 10.45 MiB uncore_imc/data_writes/
  30.000633299 37,965.29 MiB uncore_imc/data_reads/
  30.000633299 323.62 MiB uncore_imc/data_writes/
  40.000891548 41,012.88 MiB uncore_imc/data_reads/
  40.000891548 6.98 MiB uncore_imc/data_writes/
  50.001142480 1,125,899,906,621,494.75 MiB uncore_imc/data_reads/
  50.001142480 6.97 MiB uncore_imc/data_writes/

The client IMC events are freerunning counters. They still use the
old event encoding format (0x1 for data_read and 0x2 for data write).
The counter bit width is calculated by common code, which assume that
the standard encoding format is used for the freerunning counters.
Error bit width information is calculated.

The patch intends to convert the old client IMC event encoding to the
standard encoding format.

Current common code uses event->attr.config which directly copy from
user space. We should not implicitly modify it for a converted event.
The event->hw.config is used to replace the event->attr.config in
common code.

For client IMC events, the event->attr.config is used to calculate a
converted event with standard encoding format in the custom
event_init(). The converted event is stored in event->hw.config.
For other events of freerunning counters, they already use the standard
encoding format. The same value as event->attr.config is assigned to
event->hw.config in common event_init().

Reported-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: stable@kernel.org # v4.18+
Fixes: 9aae1780e7e8 ("perf/x86/intel/uncore: Clean up client IMC uncore")
Link: https://lkml.kernel.org/r/20190227165729.1861-1-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/ring_buffer: Use high order allocations for AUX buffers optimistically

Currently, the AUX buffer allocator will use high-order allocations
for PMUs that don't support hardware scatter-gather chaining to ensure
large contiguous blocks of pages, and always use an array of single
pages otherwise.

There is, however, a tangible performance benefit in using larger chunks
of contiguous memory even in the latter case, that comes from not having
to fetch the next page's address at every page boundary. In particular,
a task running under Intel PT on an Atom CPU shows 1.5%-2% less runtime
penalty with a single multi-page output region in snapshot mode (no PMI)
than with multiple single-page output regions, from ~6% down to ~4%. For
the snapshot mode it does make a difference as it is intended to run over
long periods of time.

For this reason, change the allocation policy to always optimistically
start with the highest possible order when allocating pages for the AUX
buffer, desceding until the allocation succeeds or order zero allocation
fails.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/20190215114727.62648-2-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf data: Force perf_data__open|close zero data->file.path

Making sure the data->file.path is zeroed on perf_data__open error path
and in perf_data__close, so we don't double free it in case someone call
it twice.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de>
Cc: Nageswara R Sastry <nasastry@in.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lkml.kernel.org/r/20190305152536.21035-9-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf session: Fix double free in perf_data__close

We can't call perf_data__close and subsequently perf_session__delete,
because it will call perf_data__close again and cause double free for
data->file.path.

  $ perf report -i .
  incompatible file format (rerun with -v to learn more)
  free(): double free detected in tcache 2
  Aborted (core dumped)

In fact we don't need to call perf_data__close at all, because at the
time the got out_close is reached, session->data is already initialized,
so the perf_data__close call will be triggered from
perf_session__delete.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de>
Cc: Nageswara R Sastry <nasastry@in.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Fixes: 2d4f27999b88 ("perf data: Add global path holder")
Link: http://lkml.kernel.org/r/20190305152536.21035-8-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf evsel: Probe for precise_ip with simple attr

Currently we probe for precise_ip with user specified perf_event_attr,
which might fail because of unsupported kernel features, which would get
disabled during the open time anyway.

Switching the probe to take place on simple hw cycles, so the following
record sets proper precise_ip:

  # perf record -e cycles:P ls
  # perf evlist -v
  cycles:P: size: 112, ... precise_ip: 3, ...

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de>
Cc: Nageswara R Sastry <nasastry@in.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lkml.kernel.org/r/20190305152536.21035-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Read and store caps/max_precise in perf_pmu

Read the caps/max_precise value and store it in struct perf_pmu to be
used when setting the maximum precise_ip field in following patch.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de>
Cc: Nageswara R Sastry <nasastry@in.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lkml.kernel.org/r/20190305152536.21035-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hist: Fix memory leak of srcline

We can't allocate he->srcline unconditionaly, only when new hist_entry
is created. Moving he->srcline allocation into hist_entry__init
function.

Original-patch-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de>
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Nageswara R Sastry <nasastry@in.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lkml.kernel.org/r/20190305152536.21035-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hist: Add error path into hist_entry__init

Adding error path into hist_entry__init to unify error handling, so
every new member does not need to free everything else.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: nageswara r sastry <nasastry@in.ibm.com>
Link: http://lkml.kernel.org/r/20190305152536.21035-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf c2c: Fix c2c report for empty numa node

Ravi Bangoria reported that we fail with an empty NUMA node with the
following message:

  $ lscpu
  NUMA node0 CPU(s):
  NUMA node1 CPU(s):   0-4

  $ sudo ./perf c2c report
  node/cpu topology bugFailed setup nodes

Fix this by detecting the empty node and keeping its CPU set empty.

Reported-by: Nageswara R Sastry <nasastry@in.ibm.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190305152536.21035-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf script python: Add Python3 support to intel-pt-events.py

Support both Python2 and Python3 in the intel-pt-events.py script

There may be differences in the ordering of output lines due to
differences in dictionary ordering etc.  However the format within lines
should be unchanged.

The use of 'from __future__' implies the minimum supported Python2 version
is now v2.6

Signed-off-by: Tony Jones <tonyj@suse.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/r/fd26acf9-0c0f-717f-9664-a3c33043ce19@suse.de
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf script python: Add Python3 support to event_analyzing_sample.py

Support both Python2 and Python3 in the event_analyzing_sample.py script

There may be differences in the ordering of output lines due to
differences in dictionary ordering etc.  However the format within lines
should be unchanged.

The use of 'from __future__' implies the minimum supported Python2 version
is now v2.6

Signed-off-by: Tony Jones <tonyj@suse.de>
Cc: Feng Tang <feng.tang@intel.com>
Link: http://lkml.kernel.org/r/20190302011903.2416-5-tonyj@suse.de
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf script python: add Python3 support to check-perf-trace.py

Support both Python 2 and Python 3 in the check-perf-trace.py script.

There may be differences in the ordering of output lines due to
differences in dictionary ordering etc.  However the format within lines
should be unchanged.

The use of from __future__ implies the minimum supported version of
Python2 is now v2.6

Signed-off-by: Tony Jones <tonyj@suse.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: http://lkml.kernel.org/r/20190302011903.2416-4-tonyj@suse.de
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf script python: Add Python3 support to futex-contention.py

Support both Python2 and Python3 in the futex-contention.py script

There may be differences in the ordering of output lines due to
differences in dictionary ordering etc.  However the format within lines
should be unchanged.

The use of 'from __future__' implies the minimum supported Python2 version
is now v2.6

Signed-off-by: Tony Jones <tonyj@suse.de>
Link: http://lkml.kernel.org/r/20190302011903.2416-3-tonyj@suse.de
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf script python: Remove mixed indentation

Remove mixed indentation in Python scripts.  Revert to either all tabs
(most common form) or all spaces (4 or 8) depending on what was the
intent of the original commit.  This is necessary to complete Python3
support as it will flag an error if it encounters mixed indentation.

Signed-off-by: Tony Jones <tonyj@suse.de>
Link: http://lkml.kernel.org/r/20190302011903.2416-2-tonyj@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf diff: Support --pid/--tid filter options

Using the existing symbol_conf.pid_list_str and symbol_conf.tid_list_str
logic.

For example:

  perf diff --tid 13965

It'll only diff the samples for thread 13965.

Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1551791143-10334-4-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf diff: Support --cpu filter option

To improve 'perf diff', implement a --cpu filter option.

Multiple CPUs can be provided as a comma-separated list with no space:
0,1.  Ranges of CPUs are specified with -: 0-2. Default is to report
samples on all CPUs.

For example,

  perf diff --cpu 0,1

It only diff the samples for CPU0 and CPU1.

Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1551791143-10334-3-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf diff: Support --time filter option

To improve 'perf diff', implement a --time filter option to diff the
samples within given time window.

It supports time percent with multiple time ranges. The time string
format is 'a%/n,b%/m,...' or 'a%-b%,c%-%d,...'.

For example:

Select the second 10% time slice to diff:

  perf diff --time 10%/2

Select from 0% to 10% time slice to diff:

  perf diff --time 0%-10%

Select the first and the second 10% time slices to diff:

  perf diff --time 10%/1,10%/2

Select from 0% to 10% and 30% to 40% slices to diff:

  perf diff --time 0%-10%,30%-40%

It also supports analysing samples within a given time window
<start>,<stop>.

Times have the format seconds.microseconds.

If 'start' is not given (i.e., time string is ',x.y') then analysis starts at
the beginning of the file.

If the stop time is not given (i.e, time string is 'x.y,') then analysis
goes to end of file.

Time string is 'a1.b1,c1.d1:a2.b2,c2.d2'. Use ':' to separate timestamps for
different perf.data files.

For example, we get the timestamp information from perf script.

  perf script -i perf.data.old

    mgen 13940 [000]  3946.361400: ...

  perf script -i perf.data

    mgen 13940 [000]  3971.150589 ...

  perf diff --time 3946.361400,:3971.150589,

It analyzes the perf.data.old from the timestamp 3946.361400 to the end of
perf.data.old and analyzes the perf.data from the timestamp 3971.150589 to the
end of perf.data.

 v4:
 ---
 Update abstime_str_dup(), let it return error if strdup
 is failed, and update __cmd_diff() accordingly.

Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1551791143-10334-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf thread: Generalize function to copy from thread addr space from intel-bts code

Add a utility function to fetch executable code. Convert one
user over to it. There are more places doing that, but they
do significantly different actions, so they are not
easy to fit into a single library function.

Committer changes:

. No need to cast around, make 'buf' be a void pointer.

. Rename it to thread__memcpy() to reflect the fact it is about copying
  a chunk of memory from a thread, i.e. from its address space.

. No need to have it in a separate object file, move it to thread.[ch]

. Check the return of map__load(), the original code didn't do it, but
  since we're moving this around, check that as well.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/20190305144758.12397-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf annotate: Calculate the max instruction name, align column to that

We were hardcoding '6' as the max instruction name, and we have lots
that are longer than that, see the diff from two 'P' printed TUI
annotations for a libc function that uses instructions with long names,
such as 'vpmovmskb' with its 9 chars:

  --- __strcmp_avx2.annotation.before 2019-03-06 16:31:39.368020425 -0300
  +++ __strcmp_avx2.annotation 2019-03-06 16:32:12.079450508 -0300
  @@ -2,284 +2,284 @@
   Event: cycles:ppp

   Percent        endbr64
  -  0.10         mov    %edi,%eax
  +  0.10         mov        %edi,%eax
  -               xor    %edx,%edx
  +               xor        %edx,%edx
  -  3.54         vpxor  %ymm7,%ymm7,%ymm7
  +  3.54         vpxor      %ymm7,%ymm7,%ymm7
  -               or     %esi,%eax
  +               or         %esi,%eax
  -               and    $0xfff,%eax
  +               and        $0xfff,%eax
  -               cmp    $0xf80,%eax
  +               cmp        $0xf80,%eax
  -             ↓ jg     370
  +             ↓ jg         370
  - 27.07         vmovdqu (%rdi),%ymm1
  + 27.07         vmovdqu    (%rdi),%ymm1
  -  7.97         vpcmpeqb (%rsi),%ymm1,%ymm0
  +  7.97         vpcmpeqb   (%rsi),%ymm1,%ymm0
  -  2.15         vpminub %ymm1,%ymm0,%ymm0
  +  2.15         vpminub    %ymm1,%ymm0,%ymm0
  -  4.09         vpcmpeqb %ymm7,%ymm0,%ymm0
  +  4.09         vpcmpeqb   %ymm7,%ymm0,%ymm0
  -  0.43         vpmovmskb %ymm0,%ecx
  +  0.43         vpmovmskb  %ymm0,%ecx
  -  1.53         test   %ecx,%ecx
  +  1.53         test       %ecx,%ecx
  -             ↓ je     b0
  +             ↓ je         b0
  -  5.26         tzcnt  %ecx,%edx
  +  5.26         tzcnt      %ecx,%edx
  - 18.40         movzbl (%rdi,%rdx,1),%eax
  + 18.40         movzbl     (%rdi,%rdx,1),%eax
  -  7.09         movzbl (%rsi,%rdx,1),%edx
  +  7.09         movzbl     (%rsi,%rdx,1),%edx
  -  3.34         sub    %edx,%eax
  +  3.34         sub        %edx,%eax
     2.37         vzeroupper
                ← retq
                  nop
  -         50:   tzcnt  %ecx,%edx
  +         50:   tzcnt      %ecx,%edx
  -               movzbl 0x20(%rdi,%rdx,1),%eax
  +               movzbl     0x20(%rdi,%rdx,1),%eax
  -               movzbl 0x20(%rsi,%rdx,1),%edx
  +               movzbl     0x20(%rsi,%rdx,1),%edx
  -               sub    %edx,%eax
  +               sub        %edx,%eax
                  vzeroupper
                ← retq
  -               data16 nopw %cs:0x0(%rax,%rax,1)
  +               data16     nopw %cs:0x0(%rax,%rax,1)

Reported-by: Travis Downs <travis.downs@gmail.com>
LPU-Reference: CAOBGo4z1KfmWeOm6Et0cnX5Z6DWsG2PQbAvRn1MhVPJmXHrc5g@mail.gmail.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-89wsdd9h9g6bvq52sgp6d0u4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge branch 'x86-alternatives-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 alternative instruction updates from Ingo Molnar:
 "Small RDTSCP opimization, enabled by the newly added ALTERNATIVE_3(),
  and other small improvements"

* 'x86-alternatives-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/TSC: Use RDTSCP
  x86/alternatives: Add an ALTERNATIVE_3() macro
  x86/alternatives: Print containing function
  x86/alternatives: Add macro comments

Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler updates from Ingo Molnar:
 "The main changes in this cycle were:

   - refcount conversions

   - Solve the rq->leaf_cfs_rq_list can of worms for real.

   - improve power-aware scheduling

   - add sysctl knob for Energy Aware Scheduling

   - documentation updates

   - misc other changes"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
  kthread: Do not use TIMER_IRQSAFE
  kthread: Convert worker lock to raw spinlock
  sched/fair: Use non-atomic cpumask_{set,clear}_cpu()
  sched/fair: Remove unused 'sd' parameter from select_idle_smt()
  sched/wait: Use freezable_schedule() when possible
  sched/fair: Prune, fix and simplify the nohz_balancer_kick() comment block
  sched/fair: Explain LLC nohz kick condition
  sched/fair: Simplify nohz_balancer_kick()
  sched/topology: Fix percpu data types in struct sd_data & struct s_data
  sched/fair: Simplify post_init_entity_util_avg() by calling it with a task_struct pointer argument
  sched/fair: Fix O(nr_cgroups) in the load balancing path
  sched/fair: Optimize update_blocked_averages()
  sched/fair: Fix insertion in rq->leaf_cfs_rq_list
  sched/fair: Add tmp_alone_branch assertion
  sched/core: Use READ_ONCE()/WRITE_ONCE() in move_queued_task()/task_rq_lock()
  sched/debug: Initialize sd_sysctl_cpus if !CONFIG_CPUMASK_OFFSTACK
  sched/pelt: Skip updating util_est when utilization is higher than CPU's capacity
  sched/fair: Update scale invariance of PELT
  sched/fair: Move the rq_of() helper function
  sched/core: Convert task_struct.stack_refcount to refcount_t
  ...

Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf updates from Ingo Molnar:
 "Lots of tooling updates - too many to list, here's a few highlights:

   - Various subcommand updates to 'perf trace', 'perf report', 'perf
     record', 'perf annotate', 'perf script', 'perf test', etc.

   - CPU and NUMA topology and affinity handling improvements,

   - HW tracing and HW support updates:
      - Intel PT updates
      - ARM CoreSight updates
      - vendor HW event updates

   - BPF updates

   - Tons of infrastructure updates, both on the build system and the
     library support side

   - Documentation updates.

   - ... and lots of other changes, see the changelog for details.

  Kernel side updates:

   - Tighten up kprobes blacklist handling, reduce the number of places
     where developers can install a kprobe and hang/crash the system.

   - Fix/enhance vma address filter handling.

   - Various PMU driver updates, small fixes and additions.

   - refcount_t conversions

   - BPF updates

   - error code propagation enhancements

   - misc other changes"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (238 commits)
  perf script python: Add Python3 support to syscall-counts-by-pid.py
  perf script python: Add Python3 support to syscall-counts.py
  perf script python: Add Python3 support to stat-cpi.py
  perf script python: Add Python3 support to stackcollapse.py
  perf script python: Add Python3 support to sctop.py
  perf script python: Add Python3 support to powerpc-hcalls.py
  perf script python: Add Python3 support to net_dropmonitor.py
  perf script python: Add Python3 support to mem-phys-addr.py
  perf script python: Add Python3 support to failed-syscalls-by-pid.py
  perf script python: Add Python3 support to netdev-times.py
  perf tools: Add perf_exe() helper to find perf binary
  perf script: Handle missing fields with -F +..
  perf data: Add perf_data__open_dir_data function
  perf data: Add perf_data__(create_dir|close_dir) functions
  perf data: Fail check_backup in case of error
  perf data: Make check_backup work over directories
  perf tools: Add rm_rf_perf_data function
  perf tools: Add pattern name checking to rm_rf
  perf tools: Add depth checking to rm_rf
  perf data: Add global path holder
  ...

Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull locking updates from Ingo Molnar:
 "The biggest part of this tree is the new auto-generated atomics API
  wrappers by Mark Rutland.

  The primary motivation was to allow instrumentation without uglifying
  the primary source code.

  The linecount increase comes from adding the auto-generated files to
  the Git space as well:

    include/asm-generic/atomic-instrumented.h     | 1689 ++++++++++++++++--
    include/asm-generic/atomic-long.h             | 1174 ++++++++++---
    include/linux/atomic-fallback.h               | 2295 +++++++++++++++++++++++++
    include/linux/atomic.h                        | 1241 +------------

  I preferred this approach, so that the full call stack of the (already
  complex) locking APIs is still fully visible in 'git grep'.

  But if this is excessive we could certainly hide them.

  There's a separate build-time mechanism to determine whether the
  headers are out of date (they should never be stale if we do our job
  right).

  Anyway, nothing from this should be visible to regular kernel
  developers.

  Other changes:

   - Add support for dynamic keys, which removes a source of false
     positives in the workqueue code, among other things (Bart Van
     Assche)

   - Updates to tools/memory-model (Andrea Parri, Paul E. McKenney)

   - qspinlock, wake_q and lockdep micro-optimizations (Waiman Long)

   - misc other updates and enhancements"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits)
  locking/lockdep: Shrink struct lock_class_key
  locking/lockdep: Add module_param to enable consistency checks
  lockdep/lib/tests: Test dynamic key registration
  lockdep/lib/tests: Fix run_tests.sh
  kernel/workqueue: Use dynamic lockdep keys for workqueues
  locking/lockdep: Add support for dynamic keys
  locking/lockdep: Verify whether lock objects are small enough to be used as class keys
  locking/lockdep: Check data structure consistency
  locking/lockdep: Reuse lock chains that have been freed
  locking/lockdep: Fix a comment in add_chain_cache()
  locking/lockdep: Introduce lockdep_next_lockchain() and lock_chain_count()
  locking/lockdep: Reuse list entries that are no longer in use
  locking/lockdep: Free lock classes that are no longer in use
  locking/lockdep: Update two outdated comments
  locking/lockdep: Make it easy to detect whether or not inside a selftest
  locking/lockdep: Split lockdep_free_key_range() and lockdep_reset_lock()
  locking/lockdep: Initialize the locks_before and locks_after lists earlier
  locking/lockdep: Make zap_class() remove all matching lock order entries
  locking/lockdep: Reorder struct lock_class members
  locking/lockdep: Avoid that add_chain_cache() adds an invalid chain to the cache
  ...

Merge branch 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull EFI updates from Ingo Molnar:
 "The main EFI changes in this cycle were:

   - Use 32-bit alignment for efi_guid_t

   - Allow the SetVirtualAddressMap() call to be omitted

   - Implement earlycon=efifb based on existing earlyprintk code

   - Various minor fixes and code cleanups from Sai, Ard and me"

* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: Fix build error due to enum collision between efi.h and ima.h
  efi/x86: Convert x86 EFI earlyprintk into generic earlycon implementation
  x86: Make ARCH_USE_MEMREMAP_PROT a generic Kconfig symbol
  efi/arm/arm64: Allow SetVirtualAddressMap() to be omitted
  efi: Replace GPL license boilerplate with SPDX headers
  efi/fdt: Apply more cleanups
  efi: Use 32-bit alignment for efi_guid_t
  efi/memattr: Don't bail on zero VA if it equals the region's PA
  x86/efi: Mark can_free_region() as an __init function

perf clang: Remove needless extra semicolon

Delete a superfluous semicolon in getBPFObjectFromModule().

Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Wei <albin_yang@163.com>
Link: http://lkml.kernel.org/r/1551710174-3349-1-git-send-email-albin_yang@163.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>