ALSA: ppc: keywest: Drop explicit initialization of struct i2c_device_id::driver_data to 0
The driver doesn't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
ALSA: seq: Add tempo base unit for MIDI2 Set Tempo messages
MIDI2 Set Tempo message defines the tempo in 10ns unit for finer
accuracy, while MIDI1 was defined in 1us unit. For adapting this
different unit, introduce "tempo_base" field to snd_seq_queue_tempo
struct so that user-space can pass the proper tempo base unit.
The accepted value is limited, it must be either 0, 10 or 1000.
The protocol version is bumped to 1.0.4 along with this.
The access with the older protocol version ignores the tempo-base
value in ioctls and always treats as 1000.
Stefan Binding [Wed, 3 Jul 2024 14:07:28 +0000 (15:07 +0100)]
ALSA: hda: cs35l41: Fix missing Speaker ID GPIO description in _DSD
Laptop 10431A63 contains valid _DSD, but missing Speaker ID
description. Add this discription, but keep the rest of the _DSD to
ensure the correct firmware and tuning is loaded for this laptop.
Jaroslav Kysela [Tue, 25 Jun 2024 17:25:46 +0000 (19:25 +0200)]
ALSA: pcm: reinvent the stream synchronization ID API
Until the commit e11f0f90a626 ("ALSA: pcm: remove SNDRV_PCM_IOCTL1_INFO
internal command"), there was a possibility to pass information
about the synchronized streams to the user space. The mentioned
commit removed blindly the appropriate code with an irrelevant comment.
The revert may be appropriate, but since this API was lost for several
years without any complains, it's time to improve it. The hardware
parameters may change the used stream clock source (e.g. USB hardware)
so move this synchronization ID to hw_params as read-only field.
It seems that pipewire can benefit from this API (disable adaptive
resampling for perfectly synchronized PCM streams) now.
Note that the contents of ID is not supposed to be used for direct
comparison with a specific byte sequence. The "empty" case is when
all bytes are zero (driver does not offer this information)
and all other cases must be only used for equal comparison among
PCM streams (including different sound cards) if they are using
identical hardware clock.
Zhu Jun [Wed, 26 Jun 2024 08:48:59 +0000 (01:48 -0700)]
selftests/alsa:Fix printf format string in pcm-test.c
Inside of test_pcm_time() arguments are printed via printf
but '%d' is used to print @flags (of type unsigned int).
Use '%u' instead, just like we do everywhere else.
Takashi Iwai [Wed, 26 Jun 2024 20:02:55 +0000 (22:02 +0200)]
Merge tag 'asoc-fix-v6.10-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.10
A relatively large batch of updates, largely due to the long interval
since I last sent fixes due to various travel and holidays. There's a
lot of driver specific fixes and quirks in here, none of them too major,
and also some fixes for recently introduced memory safety issues in the
topology code.
Takashi Iwai [Wed, 26 Jun 2024 14:51:13 +0000 (16:51 +0200)]
ALSA: seq: Fix missing MSB in MIDI2 SPP conversion
The conversion of SPP to MIDI2 UMP called a wrong function, and the
secondary argument wasn't taken. As a result, MSB of SPP was always
zero. Fix to call the right function.
Takashi Iwai [Tue, 25 Jun 2024 15:52:12 +0000 (17:52 +0200)]
ALSA: hda/realtek: Fix conflicting quirk for PCI SSID 17aa:3820
The recent fix for Lenovo IdeaPad 330-17IKB replaced the quirk entry,
and this eventually breaks the existing quirk for Lenovo Yoga Duet 7
13ITL6 equipped with the same PCI SSID 17aa:3820.
For applying a proper quirk for each model, check the codec SSID
additionally. Fortunately Yoga Duet has a different codec SSID,
0x17aa3802.
(Interestingly, 17aa:3802 has another conflict of SSID between another
Yoga model vs 14IRP8 which we had to work around similarly.)
Takashi Iwai [Tue, 25 Jun 2024 11:33:55 +0000 (13:33 +0200)]
ALSA: pcm_dmaengine: Unify two close functions
Both snd_dmaengine_pcm_close() and
snd_dmaengine_pcm_close_release_chan() are almost identical except for
a call of dma_release_channel() in the latter. For code
simplification, unify them internally.
Just a code refactoring, and no functional changes.
Shengjiu Wang [Thu, 20 Jun 2024 02:40:18 +0000 (10:40 +0800)]
ALSA: dmaengine_pcm: terminate dmaengine before synchronize
When dmaengine supports pause function, in suspend state,
dmaengine_pause() is called instead of dmaengine_terminate_async(),
In end of playback stream, the runtime->state will go to
SNDRV_PCM_STATE_DRAINING, if system suspend & resume happen
at this time, application will not resume playback stream, the
stream will be closed directly, the dmaengine_terminate_async()
will not be called before the dmaengine_synchronize(), which
violates the call sequence for dmaengine_synchronize().
This behavior also happens for capture streams, but there is no
SNDRV_PCM_STATE_DRAINING state for capture. So use
dmaengine_tx_status() to check the DMA status if the status is
DMA_PAUSED, then call dmaengine_terminate_async() to terminate
dmaengine before dmaengine_synchronize().
Chen-Yu Tsai [Mon, 24 Jun 2024 06:12:56 +0000 (14:12 +0800)]
ASoC: mediatek: mt8195: Add platform entry for ETDM1_OUT_BE dai link
Commit e70b8dd26711 ("ASoC: mediatek: mt8195: Remove afe-dai component
and rework codec link") removed the codec entry for the ETDM1_OUT_BE
dai link entirely instead of replacing it with COMP_EMPTY(). This worked
by accident as the remaining COMP_EMPTY() platform entry became the codec
entry, and the platform entry became completely empty, effectively the
same as COMP_DUMMY() since snd_soc_fill_dummy_dai() doesn't do anything
for platform entries.
This causes a KASAN out-of-bounds warning in mtk_soundcard_common_probe()
in sound/soc/mediatek/common/mtk-soundcard-driver.c:
for_each_card_prelinks(card, i, dai_link) {
if (adsp_node && !strncmp(dai_link->name, "AFE_SOF", strlen("AFE_SOF")))
dai_link->platforms->of_node = adsp_node;
else if (!dai_link->platforms->name && !dai_link->platforms->of_node)
dai_link->platforms->of_node = platform_node;
}
where the code expects the platforms array to have space for at least one entry.
Add an COMP_EMPTY() entry so that dai_link->platforms has space.
Fixes: e70b8dd26711 ("ASoC: mediatek: mt8195: Remove afe-dai component and rework codec link") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patch.msgid.link/20240624061257.3115467-1-wenst@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Fri, 21 Jun 2024 07:39:09 +0000 (09:39 +0200)]
ALSA: hda: Use imply for suggesting CONFIG_SERIAL_MULTI_INSTANTIATE
The recent fix introduced a reverse selection of
CONFIG_SERIAL_MULTI_INSTANTIATE, but its condition isn't always met.
Use a weak reverse selection to suggest the config for avoiding such
inconsistencies, instead.
Elinor Montmasson [Thu, 20 Jun 2024 13:25:03 +0000 (15:25 +0200)]
ASoC: fsl-asoc-card: set priv->pdev before using it
priv->pdev pointer was set after being used in
fsl_asoc_card_audmux_init().
Move this assignment at the start of the probe function, so
sub-functions can correctly use pdev through priv.
fsl_asoc_card_audmux_init() dereferences priv->pdev to get access to the
dev struct, used with dev_err macros.
As priv is zero-initialised, there would be a NULL pointer dereference.
Note that if priv->dev is dereferenced before assignment but never used,
for example if there is no error to be printed, the driver won't crash
probably due to compiler optimisations.
The ACPI IDs used in the CS35L56 HDA drivers are all handled by the
serial multi-instantiate driver which starts multiple Linux device
instances from a single ACPI Device() node.
As serial multi-instantiate is not an optional part of the system add it
as a dependency in Kconfig so that it is not overlooked.
chip->flag variable assignment will be skipped when acp platform device
creation is skipped. In this case chip>flag value will not be set.
chip->flag variable should be assigned along with other structure
variables for 'chip' structure. Move chip->flag variable assignment
prior to acp platform device creation.
Vijendar Mukunda [Mon, 17 Jun 2024 07:28:35 +0000 (12:58 +0530)]
ASoC: amd: acp: remove i2s configuration check in acp_i2s_probe()
ACP supports different pin configurations for I2S IO. Checking ACP pin
configuration value against specific value breaks the functionality for
other I2S pin configurations. This check is no longer required in i2s dai
driver probe call as i2s configuration check will be verified during acp
platform device creation sequence.
Remove i2s_mode check in acp_i2s_probe() function.
Vijendar Mukunda [Mon, 17 Jun 2024 07:28:34 +0000 (12:58 +0530)]
ASoC: amd: acp: add a null check for chip_pdev structure
When acp platform device creation is skipped, chip->chip_pdev value will
remain NULL. Add NULL check for chip->chip_pdev structure in
snd_acp_resume() function to avoid null pointer dereference.
Simon Trimmer [Tue, 18 Jun 2024 13:00:11 +0000 (14:00 +0100)]
ALSA: hda: cs35l56: Perform firmware download in the background
It is possible that during system boot when there multiple devices
attempting simultaneous initialization on a slow control bus the
download of firmware and tuning data may take a user perceivable amount
of time (a slow I2C bus with 4 amps this work could take over 2
seconds).
Adopt a pattern used in the ASoC driver and perform this activity in a
background thread so that interactive performance is not impaired. The
system_long_wq is a parallel workqueue and driver instances will perform
their firmware downloads in parallel to make best use of available bus
bandwidth.
Takashi Iwai [Mon, 17 Jun 2024 10:05:23 +0000 (12:05 +0200)]
ALSA: control: Allow NULL passed to snd_ctl_remove()
There are lots of code checking NULL for kcontrol passed to
snd_ctl_remove() in the caller side. Let's make snd_ctl_remove()
accepting the NULL kcontrol instead a la free(), so that we can clean
up the caller side.
Takashi Iwai [Sun, 16 Jun 2024 07:34:47 +0000 (09:34 +0200)]
ALSA: hda: Add input value sanity checks to HDMI channel map controls
Add a simple sanity check to HD-audio HDMI Channel Map controls.
Although the value might not be accepted for the actual connection, we
can filter out some bogus values beforehand, and that should be enough
for making kselftest happier.
Takashi Iwai [Sun, 16 Jun 2024 07:34:46 +0000 (09:34 +0200)]
ALSA: chmap: Mark Channel Map controls as volatile
The values returned from Playback Channel Map and Capture Channel Map
controls may vary dynamically depending on the corresponding PCM
stream. Mark those as volatile to indicate the values are unstable
and not suitable for testing.
Note that we may change the driver to return -EINVAL, but this would
bring other side effects, such as "alsactl restore" would start
receiving unexpected errors. So we still keep returning 0 for those
invalid inputs.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Closes: https://lore.kernel.org/r/1d44be36-9bb9-4d82-8953-5ae2a4f09405@molgen.mpg.de Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/20240616073454.16512-6-tiwai@suse.de
Mark Brown [Sun, 16 Jun 2024 07:34:45 +0000 (09:34 +0200)]
kselftest/alsa: Fix validation of writes to volatile controls
When validating writes to controls we check that whatever value we wrote
actually appears in the control. For volatile controls we cannot assume
that this will be the case, the value may be changed at any time
including between our write and read. Handle this by moving the check
for volatile controls that we currently do for events to a separate
block and just verifying that whatever value we read is valid for the
control.
Takashi Iwai [Sun, 16 Jun 2024 07:34:44 +0000 (09:34 +0200)]
ALSA: control: Apply sanity check of input values for user elements
Although we have already a mechanism for sanity checks of input values
for control writes, it's not applied unless the kconfig
CONFIG_SND_CTL_INPUT_VALIDATION is set due to the performance reason.
Nevertheless, it still makes sense to apply the same check for user
elements despite of its cost, as that's the only way to filter out the
invalid values; the user controls are handled solely in ALSA core
code, and there is no corresponding driver, after all.
This patch adds the same input value validation for user control
elements at its put callback. The kselftest will be happier with this
change, as the incorrect values will be bailed out now with errors.
For other normal controls, the check is applied still only when
CONFIG_SND_CTL_INPUT_VALIDATION is set.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Closes: https://lore.kernel.org/r/1d44be36-9bb9-4d82-8953-5ae2a4f09405@molgen.mpg.de Reviewed-by: Jaroslav Kysela <perex@perex.cz> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/20240616073454.16512-4-tiwai@suse.de
Takashi Iwai [Sun, 16 Jun 2024 07:34:43 +0000 (09:34 +0200)]
ALSA: hda: Return -EINVAL for invalid volume/switch inputs
So far the HD-audio driver has been tolerant about the input values
and accepts any values by correcting the amp volume and switch values
internally. But now our own selftest starts complaining about this
behavior, so let's be picky and change the behavior to return -EINVAL
for invalid input values instead.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Closes: https://lore.kernel.org/r/1d44be36-9bb9-4d82-8953-5ae2a4f09405@molgen.mpg.de Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/20240616073454.16512-3-tiwai@suse.de
Takashi Iwai [Sun, 16 Jun 2024 07:34:42 +0000 (09:34 +0200)]
ALSA: vmaster: Return error for invalid input values
So far the vmaster code has been tolerant about the input values and
accepts any values by correcting internally. But now our own selftest
starts complaining about this behavior, so let's be picky and change
the behavior to return -EINVAL for invalid input values instead.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Closes: https://lore.kernel.org/r/1d44be36-9bb9-4d82-8953-5ae2a4f09405@molgen.mpg.de Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/20240616073454.16512-2-tiwai@suse.de
bo liu [Tue, 18 Jun 2024 01:01:21 +0000 (09:01 +0800)]
ALSA: hda/senarytech: add senarytech codec support
Add initial Senarytech codec support for SN6186. Note that this hda
patch relies on the configuration default registers to be set correctly
(normally by BIOS/firmware) in order for it to set up pin widgets
properly.
Simon Trimmer [Mon, 17 Jun 2024 15:41:05 +0000 (16:41 +0100)]
ALSA: hda: hda_component: Protect shared data with a mutex
The hda_component contains information shared from the amp drivers to
the codec that can be altered (for example as the driver unloads). Guard
the update and use of these to prevent use of stale data.
Simon Trimmer [Mon, 17 Jun 2024 15:41:04 +0000 (16:41 +0100)]
ALSA: hda: hda_component: Move codec field into the parent
There is one codec shared across all of the bound HDA components and a
copy is usually stashed in the amp driver so it doesn't need to be in
every hda_component.
In preparation for moving duplicated members from the hda_component
structure introduce a parent structure that wraps the array of
components. This also allows us to confine the knowledge of the maximum
number of entries to the hda_component files and eliminate passing that
redundant information around and making direct accesses to the array.
Gergely Meszaros [Sun, 16 Jun 2024 08:52:33 +0000 (10:52 +0200)]
ALSA: hda/realtek: Add quirk for Lenovo Yoga Pro 7 14ARP8
Similarly to other Lenovo laptops these also have a dual speaker
setup with a shared amplifier.
The model also seems to have a conflicting PCI SSID with the codec SSID for
the Legion Y9000X 2022 IAH7. Only tested on the Yoga Pro 7, as I don't have
access to the other laptop.
Srinivas Kandagatla [Thu, 13 Jun 2024 12:13:05 +0000 (13:13 +0100)]
ASoC: q6apm-lpass-dai: close graph on prepare errors
There is an issue around with error handling and graph management with
the exising code, none of the error paths close the graph, which result in
leaving the loaded graph in dsp, however the driver thinks otherwise.
This can have a nasty side effect specially when we try to load the same
graph to dsp, dsp returns error which leaves the board with no sound and
requires restart.
Fix this by properly closing the graph when we hit errors between
open and close.
Fixes: 30ad723b93ad ("ASoC: qdsp6: audioreach: add q6apm lpass dai support") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # X13s Link: https://lore.kernel.org/r/20240613-q6apm-fixes-v1-1-d88953675ab3@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
Richard Fitzgerald [Thu, 13 Jun 2024 13:25:27 +0000 (14:25 +0100)]
ASoC: cs35l56: Disconnect ASP1 TX sources when ASP1 DAI is hooked up
If the ASP1 DAI is hooked up by the machine driver the ASP TX mixer
sources should be initialized to disconnected. There aren't currently
any available products using the ASP so this doesn't affect any
existing systems.
The cs35l56 does not have any fixed default for the mixer source
registers. When the cs35l56 boots, its firmware patches these registers
to setup a system-specific routing; this is so that Windows can use
generic SDCA drivers instead of needing knowledge of chip-specific
registers. The setup varies between end-products, which each have
customized firmware, and so the default register state varies between
end-products. It can also change if the firmware on an end-product is
upgraded - for example if a change was needed to the routing for Windows
use-cases. It must be emphasized that the settings applied by the
firmware are not internal magic tuning; they are statically implementing
use-case setup that on Linux would be done via ALSA controls.
The driver is currently syncing the mixer controls with whatever
initial state the firmware wrote to the registers, so that they report
the actual audio routing. But if the ASP DAI is hooked up this can create
a powered-up DAPM graph without anything intentionally setting up a path.
This can lead to parts of the audio system powering up unexpectedly.
For example when cs35l56 is connected to cs42l43 using a codec-codec link,
this can create a complete DAPM graph which then powers-up cs42l43. But
the cs42l43 can only be clocked from its SoundWire bus so this causes a
bunch of errors in the kernel log where cs42l43 is unexpectedly powered-up
without a clock.
If the host is taking ownership of the ASP (either directly or as a
codec-to-codec link) there is no need to keep the mixer settings that the
firmware wrote. The driver has ALSA controls for setting these using
standard Linux mechanisms. So if the machine driver hooks up the ASP the
ASP mixers are initialized to "None" (no input). This prevents unintended
DAPM-graph power-ups, and means the initial state of the mixers is
always going to be None.
Since the initial state of the mixers can vary from system to system and
potentially between firmware upgrades, no use-case manager can currently
assume that cs35l56 has a known initial state. The firmware could just as
easily default them to "None" as to any input source. So defaulting them
to "None" in the driver is not increasing the entropy of the system.
Stefan Binding [Thu, 6 Jun 2024 13:03:51 +0000 (14:03 +0100)]
ALSA: hda/realtek: Support Lenovo Thinkbook 13x Gen 4
Add support for this laptop, which uses CS35L41 HDA amps.
The laptop does not contain valid _DSD for these amps, so requires
entries into the CS35L41 configuration table to function correctly.
Stefan Binding [Thu, 6 Jun 2024 13:03:50 +0000 (14:03 +0100)]
ALSA: hda/realtek: Support Lenovo Thinkbook 16P Gen 5
Add support for this laptop, which uses CS35L41 HDA amps.
The laptop does not contain valid _DSD for these amps, so requires
entries into the CS35L41 configuration table to function correctly.
[ fixed to lower hex numbers in quirk entries -- tiwai ]
Dustin L. Howett [Wed, 5 Jun 2024 17:01:32 +0000 (12:01 -0500)]
ALSA: hda/realtek: Remove Framework Laptop 16 from quirks
The Framework Laptop 16 does not have a combination headphone/headset
3.5mm jack; however, applying the pincfg from the Laptop 13 (nid=0x19)
erroneously informs hda that the node is present.
Amadeusz Sławiński [Thu, 13 Jun 2024 09:01:26 +0000 (11:01 +0200)]
ASoC: topology: Fix route memory corruption
It was reported that recent fix for memory corruption during topology
load, causes corruption in other cases. Instead of being overeager with
checking topology, assume that it is properly formatted and just
duplicate strings.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Closes: https://lore.kernel.org/linux-sound/171812236450.201359.3019210915105428447.b4-ty@kernel.org/T/#m8c4bd5abf453960fde6f826c4b7f84881da63e9d Suggested-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20240613090126.841189-1-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown [Wed, 12 Jun 2024 17:26:15 +0000 (18:26 +0100)]
Fixes for McASP and dmaengine_pcm
Merge series from Jai Luthra <j-luthra@ti.com>:
This series fixes two patches:
1. Fix the dmaengine API usage by calling dmaengine_synchronize() after
dmaengine_terminate_async() when xrun events occur in application
2. Use the McASP AFIFO property from DT to refine the period size,
instead of hardcoding minimum to 64 samples
Jai Luthra [Tue, 11 Jun 2024 12:32:56 +0000 (18:02 +0530)]
ASoC: ti: davinci-mcasp: Set min period size using FIFO config
The minimum period size was enforced to 64 as older devices integrating
McASP with EDMA used an internal FIFO of 64 samples.
With UDMA based platforms this internal McASP FIFO is optional, as the
DMA engine internally does some buffering which is already accounted for
when registering the platform. So we should read the actual FIFO
configuration (txnumevt/rxnumevt) instead of hardcoding frames.min to
64.
Jai Luthra [Tue, 11 Jun 2024 12:32:55 +0000 (18:02 +0530)]
ALSA: dmaengine: Synchronize dma channel after drop()
Sometimes the stream may be stopped due to XRUN events, in which case
the userspace can call snd_pcm_drop() and snd_pcm_prepare() to stop and
start the stream again.
In these cases, we must wait for the DMA channel to synchronize before
marking the stream as prepared for playback, as the DMA channel gets
stopped by drop() without any synchronization. Make sure the ALSA core
synchronizes the DMA channel by adding a sync_stop() hook.
Mark Brown [Tue, 11 Jun 2024 11:28:22 +0000 (12:28 +0100)]
ASoC: topology: Fix route memory corruption
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:
Originally reported here:
https://github.com/thesofproject/avs-topology-xml/issues/22#issuecomment-2127892605
There is various level of failure there, first of all when topology
loads routes, it points directly into FW file, but it may be freed after
topology load. After fixing the above, when avs driver parses topology
it should allocate its own memory, as target strings can be shorter than
needed. Also clean up soc_tplg_dapm_graph_elems_load() a bit.
Thomas GENTY [Sat, 8 Jun 2024 17:02:51 +0000 (19:02 +0200)]
bytcr_rt5640 : inverse jack detect for Archos 101 cesium
When headphones are plugged in, they appear absent; when they are removed,
they appear present.
Add a specific entry in bytcr_rt5640 for this device
Signed-off-by: Thomas GENTY <tomlohave@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20240608170251.99936-1-tomlohave@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
Amadeusz Sławiński [Mon, 3 Jun 2024 10:28:18 +0000 (12:28 +0200)]
ASoC: topology: Clean up route loading
Instead of using very long macro name, assign it to shorter variable
and use it instead. While doing that, we can reduce multiple if checks
using this define to one.
Amadeusz Sławiński [Mon, 3 Jun 2024 10:28:15 +0000 (12:28 +0200)]
ASoC: topology: Fix references to freed memory
Most users after parsing a topology file, release memory used by it, so
having pointer references directly into topology file contents is wrong.
Use devm_kmemdup(), to allocate memory as needed.
Andrei Simion [Tue, 4 Jun 2024 10:10:30 +0000 (13:10 +0300)]
ASoC: atmel: atmel-classd: Re-add dai_link->platform to fix card init
The removed dai_link->platform component cause a fail which
is exposed at runtime. (ex: when a sound tool is used)
This patch re-adds the dai_link->platform component to have
a full card registered.
Before this patch:
:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: CLASSD [CLASSD], device 0: CLASSD PCM snd-soc-dummy-dai-0 []
Subdevices: 1/1
Subdevice #0: subdevice #0
:~$ speaker-test -t sine
speaker-test 1.2.6
Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Sine wave rate is 440.0000Hz
Playback open error: -22,Invalid argument
After this patch which restores the platform component:
:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: CLASSD [CLASSD], device 0: CLASSD PCM snd-soc-dummy-dai-0
[CLASSD PCM snd-soc-dummy-dai-0]
Subdevices: 1/1
Subdevice #0: subdevice #0
-> Resolve the playback error.
Fixes: 2f650f87c03c ("ASoC: atmel: remove unnecessary dai_link->platform") Signed-off-by: Andrei Simion <andrei.simion@microchip.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://msgid.link/r/20240604101030.237792-1-andrei.simion@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
Hsin-Te Yuan [Fri, 31 May 2024 08:37:54 +0000 (08:37 +0000)]
ASoC: mediatek: mt8183-da7219-max98357: Fix kcontrol name collision
Since "Headphone Switch" kcontrol name has already been used by da7219,
rename the control name from "Headphone" to "Headphones" to prevent the
colision. Also, this change makes kcontrol name align with the one in
mt8186-mt6366-da7219-max98357.c.
Fixes: 9c7388baa2053 ("ASoC: mediatek: mt8183-da7219-max98357: Map missing jack kcontrols")
Change-Id: I9ae69a4673cd04786b247cc514fdd20f878ef009 Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://msgid.link/r/20240531-da7219-v1-1-ac3343f3ae6a@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
Alibek Omarov [Tue, 4 Jun 2024 18:47:52 +0000 (21:47 +0300)]
ASoC: rockchip: i2s-tdm: Fix trcm mode by setting clock on right mclk
When TRCM mode is enabled, I2S RX and TX clocks are synchronized through
selected clock source. Without this fix BCLK and LRCK might get parented
to an uninitialized MCLK and the DAI will receive data at wrong pace.
However, unlike in original i2s-tdm driver, there is no need to manually
synchronize mclk_rx and mclk_tx, as only one gets used anyway.
Tested on a board with RK3568 SoC and Silergy SY24145S codec with enabled and
disabled TRCM mode.
Maciej Strozek [Tue, 4 Jun 2024 13:28:43 +0000 (14:28 +0100)]
ASoC: cs42l43: Increase default type detect time and button delay
Some problematic headsets have been discovered, to help with correctly
identifying these, the detect time must be increased. Also improve the
reliability of the impedance value from the button detect by slightly
increasing the button detect delay.
Fixes: 686b8f711b99 ("ASoC: cs42l43: Lower default type detect time") Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://msgid.link/r/20240604132843.3309114-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
Dmitry Baryshkov [Thu, 30 May 2024 22:30:54 +0000 (01:30 +0300)]
MAINTAINERS: copy linux-arm-msm for sound/qcom changes
Not having linux-arm-msm@ in cc for audio-related changes for Qualcomm
platforms means that interested parties can easily miss the patches. Add
corresponding L: entry so that linux-arm-msm ML gets CC'ed for audio
patches too.
Linus Torvalds [Sun, 2 Jun 2024 20:30:53 +0000 (13:30 -0700)]
Merge tag 'ata-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- Add a quirk for three different devices that have shown issues with
LPM (link power management). These devices appear to not implement
LPM properly, since we see command timeouts when enabling LPM. The
quirk disables LPM for these problematic devices. (Me)
- Do not apply the Intel PCS quirk on Alder Lake. The quirk is not
needed and was originally added by mistake when LPM support was
enabled for this AHCI controller. Enabling the quirk when not needed
causes the the controller to not be able to detect the connected
devices on some platforms.
* tag 'ata-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: Add ATA_HORKAGE_NOLPM for Apacer AS340
ata: libata-core: Add ATA_HORKAGE_NOLPM for AMD Radeon S3 SSD
ata: libata-core: Add ATA_HORKAGE_NOLPM for Crucial CT240BX500SSD1
ata: ahci: Do not apply Intel PCS quirk on Intel Alder Lake
Linus Torvalds [Sun, 2 Jun 2024 16:32:34 +0000 (09:32 -0700)]
Merge tag 'x86-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Miscellaneous topology parsing fixes:
- Fix topology parsing regression on older CPUs in the new AMD/Hygon
parser
- Fix boot crash on odd Intel Quark and similar CPUs that do not fill
out cpuinfo_x86::x86_clflush_size and zero out
cpuinfo_x86::x86_cache_alignment as a result.
Provide 32 bytes as a general fallback value.
- Fix topology enumeration on certain rare CPUs where the BIOS locks
certain CPUID leaves and the kernel unlocked them late, which broke
with the new topology parsing code. Factor out this unlocking logic
and move it earlier in the parsing sequence"
* tag 'x86-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/topology/intel: Unlock CPUID before evaluating anything
x86/cpu: Provide default cache line size if not enumerated
x86/topology/amd: Evaluate SMT in CPUID leaf 0x8000001e only on family 0x17 and greater
* tag 'perf-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Add missing MODULE_DESCRIPTION() lines
perf/x86/rapl: Add missing MODULE_DESCRIPTION() line
Linus Torvalds [Sun, 2 Jun 2024 16:15:28 +0000 (09:15 -0700)]
Merge tag 'hardening-v6.10-rc2-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- scsi: mpt3sas: Avoid possible run-time warning with long manufacturer
strings
- mailmap: update entry for Kees Cook
- kunit/fortify: Remove __kmalloc_node() test
* tag 'hardening-v6.10-rc2-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kunit/fortify: Remove __kmalloc_node() test
mailmap: update entry for Kees Cook
scsi: mpt3sas: Avoid possible run-time warning with long manufacturer strings
projects / users / hch / configfs.git / log