Ryusuke Konishi [Wed, 21 Aug 2024 15:46:27 +0000 (00:46 +0900)]
nilfs2: do not propagate ENOENT error from nilfs_sufile_mark_dirty()
nilfs_sufile_mark_dirty(), which marks a block in the sufile metadata file
as dirty in preparation for log writing, returns -ENOENT to the caller if
the block containing the segment usage of the specified segment is
missing.
This internal code can propagate through the log writer to system calls
such as fsync. To prevent this, treat this case as a filesystem error and
return -EIO instead.
Ryusuke Konishi [Wed, 21 Aug 2024 15:46:26 +0000 (00:46 +0900)]
nilfs2: do not propagate ENOENT error from sufile during GC
nilfs_sufile_freev(), which is used to free segments in GC, aborts with
-ENOENT if the target segment usage is on a hole block.
This error only occurs if one of the segment numbers to be freed passed by
the GC ioctl is invalid, so return -EINVAL instead.
To avoid impairing readability, introduce a wrapper function that
encapsulates error handling including the error code conversion (and error
message output).
Ryusuke Konishi [Wed, 21 Aug 2024 15:46:25 +0000 (00:46 +0900)]
nilfs2: do not propagate ENOENT error from sufile during recovery
nilfs_sufile_free() returns the error code -ENOENT when the block where
the segment usage should be placed does not exist (hole block case), but
this error should not be propagated upwards to the mount system call.
In nilfs_prepare_segment_for_recovery(), one of the recovery steps during
mount, nilfs_sufile_free() is used and may return -ENOENT as is, so in
that case return -EINVAL instead.
Ryusuke Konishi [Wed, 21 Aug 2024 15:46:24 +0000 (00:46 +0900)]
nilfs2: treat missing cpfile header block as metadata corruption
The cpfile, a metadata file that holds metadata for checkpoint management,
also has statistical information in its first block, and if reading this
block fails, it receives the internal code -ENOENT and returns that code
to the callers.
As with sufile, to prevent this -ENOENT from being propagated to system
calls, return -EIO instead when reading the header block fails.
Ryusuke Konishi [Wed, 21 Aug 2024 15:46:23 +0000 (00:46 +0900)]
nilfs2: treat missing sufile header block as metadata corruption
Patch series "nilfs2: prevent unexpected ENOENT propagation".
This series fixes potential issues where the result code -ENOENT, which is
returned internally when a metadata file operation encouters a hole block,
is exposed to user space without being properly handled.
Several issues with the same cause leading to hangs or WARN_ON check
failures have been reported by syzbot and fixed each time in the past.
This collectively fixes the missing -ENOENT conversions that do not cause
stability issues and are not covered by syzbot.
This patch (of 5):
The sufile, a metadata file that holds metadata for segment management,
has statistical information in its first block, but if reading this block
fails, it receives the internal code -ENOENT and returns it unchanged to
the callers.
To prevent this -ENOENT from being propagated to system calls, if reading
the header block fails, return -EIO (or -EINVAL depending on the context)
instead.
Thorsten Blum [Tue, 20 Aug 2024 02:16:07 +0000 (04:16 +0200)]
ocfs2: use max() to improve ocfs2_dlm_seq_show()
Use the max() macro to simplify the ocfs2_dlm_seq_show() function and
improve its readability.
Link: https://lkml.kernel.org/r/20240820021605.97887-3-thorsten.blum@toblux.com Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
qasdev [Tue, 20 Aug 2024 01:22:09 +0000 (02:22 +0100)]
ocfs2: fix shift-out-of-bounds UBSAN bug in ocfs2_verify_volume()
This patch addresses a shift-out-of-bounds error in the
ocfs2_verify_volume() function, identified by UBSAN. The bug was
triggered by an invalid s_clustersize_bits value (e.g., 1548), which
caused the expression "1 <<
le32_to_cpu(di->id2.i_super.s_clustersize_bits)" to exceed the limits of a
32-bit integer, leading to an out-of-bounds shift.
Link: https://lkml.kernel.org/r/ZsPvwQAXd5R/jNY+@hostname Signed-off-by: Qasim Ijaz <qasdev00@gmail.com> Reported-by: syzbot <syzbot+f3fff775402751ebb471@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=f3fff775402751ebb471 Tested-by: syzbot <syzbot+f3fff775402751ebb471@syzkaller.appspotmail.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mateusz Guzik [Sat, 17 Aug 2024 12:37:54 +0000 (14:37 +0200)]
ratelimit: convert flags to int to save 8 bytes in size
Only bit 1 is used, making an unsigned long a total overkill.
This brings it from 40 to 32 bytes, which in turn shrinks user_struct from
136 to 128 bytes. Since the latter is allocated with hwalign, this means
the total usage goes down from 192 to 128 bytes per object.
It turns out that the root cause is from the physical host machine. More
specifically, it is caused by the ocfs2.
when the page_size is 64k, the block should advance by 16 each time
instead of 1. This will lead to a wrong mapping from the page to the
disk, which will zero some adjacent part of the disk.
Link: https://lkml.kernel.org/r/20240815092141.1223238-1-chizhiling@163.com Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn> Suggested-by: Shida Zhang <zhangshida@kylinos.cn> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kuan-Wei Chiu [Sat, 10 Aug 2024 19:53:16 +0000 (03:53 +0800)]
ocfs2: remove custom swap functions in favor of built-in sort swap
The custom swap functions used in ocfs2 do not perform any special
operations and can be replaced with the built-in swap function of sort.
This change not only reduces code size but also improves efficiency,
especially in scenarios where CONFIG_RETPOLINE is enabled, as it makes
indirect function calls more expensive.
By using the built-in swap, we avoid these costly indirect function calls,
leading to better performance.
Link: https://lkml.kernel.org/r/20240810195316.186504-1-visitorckw@gmail.com Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Cc: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mark@fasheh.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 79365026f869 ("crash: add a new kexec flag for hotplug support")
generalizes the crash hotplug support to allow architectures to update
multiple kexec segments on CPU/Memory hotplug and not just elfcorehdr.
Therefore, update the relevant kernel documentation to reflect the same.
No functional change.
Link: https://lkml.kernel.org/r/20240812041651.703156-1-sourabhjain@linux.ibm.com Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com> Reviewed-by: Petr Tesarik <ptesarik@suse.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Petr Tesarik <petr@tesarici.cz> Cc: Sourabh Jain <sourabhjain@linux.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ryusuke Konishi [Fri, 16 Aug 2024 07:43:18 +0000 (16:43 +0900)]
nilfs2: fix inconsistencies in kernel-doc comments in segment.h
Fix incorrect or missing variable names in the member variable
descriptions in the nilfs_recovery_info and nilfs_sc_info structures,
thereby eliminating the following warnings output by the kernel-doc
script:
fs/nilfs2/segment.h:49: warning: Function parameter or struct member
'ri_cno' not described in 'nilfs_recovery_info'
fs/nilfs2/segment.h:49: warning: Function parameter or struct member
'ri_lsegs_start_seq' not described in 'nilfs_recovery_info'
fs/nilfs2/segment.h:49: warning: Excess struct member 'ri_ri_cno'
description in 'nilfs_recovery_info'
fs/nilfs2/segment.h:49: warning: Excess struct member 'ri_lseg_start_seq'
description in 'nilfs_recovery_info'
fs/nilfs2/segment.h:177: warning: Function parameter or struct member
'sc_seq_accepted' not described in 'nilfs_sc_info'
fs/nilfs2/segment.h:177: warning: Function parameter or struct member
'sc_timer_task' not described in 'nilfs_sc_info'
fs/nilfs2/segment.h:177: warning: Excess struct member 'sc_seq_accept'
description in 'nilfs_sc_info'
Ryusuke Konishi [Fri, 16 Aug 2024 07:43:17 +0000 (16:43 +0900)]
nilfs2: describe the members of nilfs_bmap_operations structure
Add missing member variable descriptions in the kernel-doc comments for
the nilfs_bmap_operations structure, hiding the internal operations with
the "private:" tag. This eliminates the following warnings output by the
kernel-doc script:
fs/nilfs2/bmap.h:74: warning: Function parameter or struct member
'bop_lookup' not described in 'nilfs_bmap_operations'
fs/nilfs2/bmap.h:74: warning: Function parameter or struct member
'bop_lookup_contig' not described in 'nilfs_bmap_operations'
...
fs/nilfs2/bmap.h:74: warning: Function parameter or struct member
'bop_gather_data' not described in 'nilfs_bmap_operations'
Ryusuke Konishi [Fri, 16 Aug 2024 07:43:16 +0000 (16:43 +0900)]
nilfs2: add missing description of nilfs_btree_path structure
Add missing kernel-doc comment for the 'bp_ctxt' member variable of the
nilfs_btree_path structure, and eliminate the following warning output by
the kenrel-doc script:
fs/nilfs2/btree.h:39: warning: Function parameter or struct member
'bp_ctxt' not described in 'nilfs_btree_path'
Ryusuke Konishi [Fri, 16 Aug 2024 07:43:15 +0000 (16:43 +0900)]
nilfs2: fix incorrect kernel-doc declaration of nilfs_palloc_req structure
The "struct" keyword is missing from the kernel-doc comment of the
nilfs_palloc_req structure, so add it to eliminate the following warning
output by the kernel-doc script:
fs/nilfs2/alloc.h:46: warning: cannot understand function prototype:
'struct nilfs_palloc_req '
Ryusuke Konishi [Fri, 16 Aug 2024 07:43:14 +0000 (16:43 +0900)]
nilfs2: improve kernel-doc comments for b-tree node helpers
Revise kernel-doc comments for helper functions related to changing the
search key for b-tree node blocks, and eliminate the following warnings
output by the kernel-doc script:
fs/nilfs2/btnode.c:175: warning: Function parameter or struct member 'btnc'
not described in 'nilfs_btnode_prepare_change_key'
fs/nilfs2/btnode.c:175: warning: Function parameter or struct member 'ctxt'
not described in 'nilfs_btnode_prepare_change_key'
fs/nilfs2/btnode.c:238: warning: Function parameter or struct member 'btnc'
not described in 'nilfs_btnode_commit_change_key'
fs/nilfs2/btnode.c:238: warning: Function parameter or struct member 'ctxt'
not described in 'nilfs_btnode_commit_change_key'
fs/nilfs2/btnode.c:278: warning: Function parameter or struct member 'btnc'
not described in 'nilfs_btnode_abort_change_key'
fs/nilfs2/btnode.c:278: warning: Function parameter or struct member 'ctxt'
not described in 'nilfs_btnode_abort_change_key'
Ryusuke Konishi [Fri, 16 Aug 2024 07:43:13 +0000 (16:43 +0900)]
nilfs2: add missing argument descriptions for ioctl-related helpers
Add missing argument descriptions and return value information to the
kernel-doc comments for ioctl helper functions, and eliminate the
following warnings output by the kernel-doc script:
fs/nilfs2/ioctl.c:120: warning: Function parameter or struct member
'dentry' not described in 'nilfs_fileattr_get'
fs/nilfs2/ioctl.c:120: warning: Function parameter or struct member 'fa'
not described in 'nilfs_fileattr_get'
fs/nilfs2/ioctl.c:133: warning: Function parameter or struct member 'idmap'
not described in 'nilfs_fileattr_set'
fs/nilfs2/ioctl.c:133: warning: Function parameter or struct member
'dentry' not described in 'nilfs_fileattr_set'
fs/nilfs2/ioctl.c:133: warning: Function parameter or struct member 'fa'
not described in 'nilfs_fileattr_set'
fs/nilfs2/ioctl.c:164: warning: Function parameter or struct member 'inode'
not described in 'nilfs_ioctl_getversion'
fs/nilfs2/ioctl.c:164: warning: Function parameter or struct member 'argp'
not described in 'nilfs_ioctl_getversion'
Ryusuke Konishi [Fri, 16 Aug 2024 07:43:12 +0000 (16:43 +0900)]
nilfs2: add missing argument description for __nilfs_error()
Patch series "This series fixes a number of formatting issues in kernel
doc comments"
This series fixes a number of formatting issues in kernel doc comments
that were detected as warnings by the kernel-doc script, making violations
more noticeable when adding or modifying kernel doc.
There are still warnings output by "kernel-doc -Wall", but they are
widespread, so I plan to fix them at another time while considering
priorities.
This patch (of 8):
Add missing argument description to __nilfs_error function and remove the
following warnings from kernel-doc script output:
fs/nilfs2/super.c:121: warning: Function parameter or struct member 'sb'
not described in '__nilfs_error'
fs/nilfs2/super.c:121: warning: Function parameter or struct member
'function' not described in '__nilfs_error'
fs/nilfs2/super.c:121: warning: Function parameter or struct member 'fmt'
not described in '__nilfs_error'
Ryusuke Konishi [Fri, 16 Aug 2024 09:01:28 +0000 (18:01 +0900)]
nilfs2: do not output warnings when clearing dirty buffers
After detecting file system corruption and degrading to a read-only mount,
dirty folios and buffers in the page cache are cleared, and a large number
of warnings are output at that time, often filling up the kernel log.
In this case, since the degrading to a read-only mount is output to the
kernel log, these warnings are not very meaningful, and are rather a
nuisance in system management and debugging.
The related nilfs2-specific page/folio routines have a silent argument
that suppresses the warning output, but since it is not currently used
meaningfully, remove both the silent argument and the warning output.
Ryusuke Konishi [Thu, 15 Aug 2024 07:44:05 +0000 (16:44 +0900)]
nilfs2: add support for FS_IOC_GETUUID
Patch series "nilfs2: add support for some common ioctls".
This series adds support for common ioctls to nilfs2 for getting the
volume UUID and the relative path of an FS instance within the sysfs
namespace, and also implements ioctls for nilfs2 to get and set the volume
label.
This patch (of 2):
Expose the UUID of a file system instance using the super_set_uuid helper
and support the FS_IOC_GETUUID ioctl.
Uros Bizjak [Wed, 14 Aug 2024 06:44:13 +0000 (08:44 +0200)]
lib/percpu_counter: add missing __percpu qualifier to a cast
Add missing __percpu qualifier to a (void *) cast to fix
percpu_counter.c:212:36: warning: cast removes address space '__percpu' of expression
percpu_counter.c:212:33: warning: incorrect type in assignment (different address spaces)
percpu_counter.c:212:33: expected signed int [noderef] [usertype] __percpu *counters
percpu_counter.c:212:33: got void *
sparse warnings.
Found by GCC's named address space checks.
There were no changes in the resulting object file.
Link: https://lkml.kernel.org/r/20240814064437.940162-1-ubizjak@gmail.com Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kuan-Wei Chiu [Mon, 12 Aug 2024 17:02:29 +0000 (01:02 +0800)]
lib/bcd: optimize _bin2bcd() for improved performance
The original _bin2bcd() function used / 10 and % 10 operations for
conversion. Although GCC optimizes these operations and does not generate
division or modulus instructions, the new implementation reduces the
number of mov instructions in the generated code for both x86-64 and ARM
architectures.
This optimization calculates the tens digit using (val * 103) >> 10, which
is accurate for values of 'val' in the range [0, 178]. Given that the
valid input range is [0, 99], this method ensures correctness while
simplifying the generated code.
Jani Nikula [Tue, 13 Aug 2024 12:12:35 +0000 (15:12 +0300)]
fault-inject: improve build for CONFIG_FAULT_INJECTION=n
The fault-inject.h users across the kernel need to add a lot of #ifdef
CONFIG_FAULT_INJECTION to cater for shortcomings in the header. Make
fault-inject.h self-contained for CONFIG_FAULT_INJECTION=n, and add stubs
for DECLARE_FAULT_ATTR(), setup_fault_attr(), should_fail_ex(), and
should_fail() to allow removal of conditional compilation.
[akpm@linux-foundation.org: repair fallout from no longer including debugfs.h into fault-inject.h]
[akpm@linux-foundation.org: fix drivers/misc/xilinx_tmr_inject.c]
[akpm@linux-foundation.org: Add debugfs.h inclusion to more files, per Stephen] Link: https://lkml.kernel.org/r/20240813121237.2382534-1-jani.nikula@intel.com Fixes: 6ff1cb355e62 ("[PATCH] fault-injection capabilities infrastructure") Signed-off-by: Jani Nikula <jani.nikula@intel.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Davidlohr Bueso [Tue, 6 Aug 2024 15:39:27 +0000 (08:39 -0700)]
lib/rhashtable: cleanup fallback check in bucket_table_alloc()
Upon allocation failure, the current check with the nofail bits is
unnecessary, and further stands in the way of discouraging direct use of
__GFP_NOFAIL. Remove this and replace with the proper way of determining
if doing a non-blocking allocation for the nested table case.
Link: https://lkml.kernel.org/r/20240806153927.184515-1-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dave@stgolabs.net> Suggested-by: Michal Hocko <mhocko@suse.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Waiman Long [Fri, 2 Aug 2024 15:16:21 +0000 (11:16 -0400)]
watchdog: handle the ENODEV failure case of lockup_detector_delay_init() separately
When watchdog_hardlockup_probe() is being called by
lockup_detector_delay_init(), an error return of -ENODEV will happen
for the arm64 arch when arch_perf_nmi_is_available() returns false. This
means that NMI is not usable by the hard lockup detector and so has to
be disabled. This can be considered a deficiency in that particular
arm64 chip, but there is nothing we can do about it. That also means
the following error will always be reported when the kernel boot up.
watchdog: Delayed init of the lockup detector failed: -19
The word "failed" itself has a connotation that there is something
wrong with the kernel which is not really the case here. Handle this
special ENODEV case separately and explain the reason behind disabling
hard lockup detector without causing anxiety for those users who read
the above message and wonder about it.
Link: https://lkml.kernel.org/r/20240802151621.617244-1-longman@redhat.com Signed-off-by: Waiman Long <longman@redhat.com> Cc: Douglas Anderson <dianders@chromium.org> Cc: Joel Granados <j.granados@samsung.com> Cc: Li Zhe <lizhe.67@bytedance.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
J. R. Okajima [Tue, 23 Jul 2024 16:40:17 +0000 (16:40 +0000)]
lockdep: upper limit LOCKDEP_CHAINS_BITS
CONFIG_LOCKDEP_CHAINS_BITS value decides the size of chain_hlocks[] in
kernel/locking/lockdep.c, and it is checked by add_chain_cache() with
BUILD_BUG_ON((1UL << 24) <= ARRAY_SIZE(chain_hlocks));
This patch is just to silence BUILD_BUG_ON().
See also https://lore.kernel.org/all/30795.1620913191@jrobl/
[cmllamas@google.com: fix minor checkpatch issues in commit log] Link: https://lkml.kernel.org/r/20240723164018.2489615-1-cmllamas@google.com Signed-off-by: J. R. Okajima <hooanon05g@gmail.com> Signed-off-by: Carlos Llamas <cmllamas@google.com> Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Waiman Long <longman@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Change the file permissions of tools/testing/fault-injection/failcmd.sh to
allow execution. This ensures the script can be run directly without
explicitly invoking a shell.
fault-injection: enhance failcmd to exit on non-hex address input
The failcmd.sh script in the fault-injection toolkit does not currently
validate whether the provided address is in hexadecimal format. This can
lead to silent failures if the address is sourced from places like
`/proc/kallsyms`, which omits the '0x' prefix, potentially causing users
to operate under incorrect assumptions.
Introduce a new function, `exit_if_not_hex`, which checks the format of
the provided address and exits with an error message if the address is not
a valid hexadecimal number.
This enhancement prevents users from running the command with improperly
formatted addresses, thus improving the robustness and usability of the
failcmd tool.
Jeff Johnson [Tue, 30 Jul 2024 14:43:22 +0000 (07:43 -0700)]
locking/ww_mutex/test: add MODULE_DESCRIPTION()
Fix the 'make W=1' warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in kernel/locking/test-ww_mutex.o
Link: https://lkml.kernel.org/r/20240730-module_description_orphans-v1-5-7094088076c8@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Waiman Long <longman@redhat.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Alistar Popple <alistair@popple.id.au> Cc: Andrew Jeffery <andrew@codeconstruct.com.au> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Eddie James <eajames@linux.ibm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: Joel Stanley <joel@jms.id.au> Cc: Karol Herbst <karolherbst@gmail.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N Rao <naveen@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Nouveau <nouveau@lists.freedesktop.org> Cc: Pekka Paalanen <ppaalanen@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jeff Johnson [Tue, 30 Jul 2024 14:43:19 +0000 (07:43 -0700)]
x86/mm: add testmmiotrace MODULE_DESCRIPTION()
Fix the following 'make W=1' warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/x86/mm/testmmiotrace.o
Link: https://lkml.kernel.org/r/20240730-module_description_orphans-v1-2-7094088076c8@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Alistar Popple <alistair@popple.id.au> Cc: Andrew Jeffery <andrew@codeconstruct.com.au> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Eddie James <eajames@linux.ibm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: Joel Stanley <joel@jms.id.au> Cc: Karol Herbst <karolherbst@gmail.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N Rao <naveen@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Nouveau <nouveau@lists.freedesktop.org> Cc: Pekka Paalanen <ppaalanen@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Waiman Long <longman@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "treewide: add missing MODULE_DESCRIPTION() macros".
Since commit 1fffe7a34c89 ("script: modpost: emit a warning when the
description is missing"), a module without a MODULE_DESCRIPTION() will
result in a warning when built with make W=1.
Recently, multiple developers have been eradicating these warnings
treewide, and I personally submitted almost 300 patches over the past few
months. Almost all of my patches landed by 6.11-rc1, either by being
merged in a 6.10-rc or by being merged in the 6.11 merge window. However,
a few of my patches did not land.
This patch (of 5):
With ARCH=arm and CONFIG_KERNEL_MODE_NEON=y, make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/arm/lib/xor-neon.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Link: https://lkml.kernel.org/r/20240730-module_description_orphans-v1-0-7094088076c8@quicinc.com Link: https://lkml.kernel.org/r/20240730-module_description_orphans-v1-1-7094088076c8@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Alistar Popple <alistair@popple.id.au> Cc: Andrew Jeffery <andrew@codeconstruct.com.au> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Eddie James <eajames@linux.ibm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: Joel Stanley <joel@jms.id.au> Cc: Karol Herbst <karolherbst@gmail.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Cc: Naveen N Rao <naveen@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Nouveau <nouveau@lists.freedesktop.org> Cc: Pekka Paalanen <ppaalanen@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Waiman Long <longman@redhat.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
failcmd is one of the main interfaces to fault injection framework, but,
it is not listed under FAULT INJECTION SUPPORT entry in MAINTAINERS. This
is unfortunate, since git-send-email doesn't find emails to send the
patches to, forcing the user to try to guess who maintains it.
Akinobu Mita seems to be actively maintaining it, so, let's add the file
under FAULT INJECTION SUPPORT section.
crash: fix crash memory reserve exceed system memory bug
On x86_32 Qemu machine with 1GB memory, the cmdline "crashkernel=4G" is ok
as below:
crashkernel reserved: 0x0000000020000000 - 0x0000000120000000 (4096 MB)
It's similar on other architectures, such as ARM32 and RISCV32.
The cause is that the crash_size is parsed and printed with "unsigned long
long" data type which is 8 bytes but allocated used with "phys_addr_t"
which is 4 bytes in memblock_phys_alloc_range().
Fix it by checking if crash_size is greater than system RAM size and
return error if so.
After this patch, there is no above confusing reserve success info.
Link: https://lkml.kernel.org/r/20240729115252.1659112-1-ruanjinjie@huawei.com Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Suggested-by: Mike Rapoport <rppt@kernel.org> Acked-by: Baoquan He <bhe@redhat.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Dave Young <dyoung@redhat.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
fs/procfs: remove build ID-related code duplication in PROCMAP_QUERY
A piece of build ID handling code in PROCMAP_QUERY ioctl() was
accidentally duplicated. It wasn't meant to be part of ed5d583a88a9
("fs/procfs: implement efficient VMA querying API for /proc/<pid>/maps")
commit, which is what introduced duplication.
It has no correctness implications, but we unnecessarily perform the same
work twice, if build ID parsing is requested. Drop the duplication.
Link: https://lkml.kernel.org/r/20240729174044.4008399-1-andrii@kernel.org Fixes: ed5d583a88a9 ("fs/procfs: implement efficient VMA querying API for /proc/<pid>/maps") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reported-by: Jann Horn <jannh@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kuan-Ying Lee [Tue, 23 Jul 2024 06:48:59 +0000 (14:48 +0800)]
scripts/gdb: fix lx-mounts command error
(gdb) lx-mounts
mount super_block devname pathname fstype options
Python Exception <class 'gdb.error'>: There is no member named list.
Error occurred in Python: There is no member named list.
We encounter the above issue after commit 2eea9ce4310d ("mounts: keep
list of mounts in an rbtree"). The commit move a mount from list into
rbtree.
So we can instead use rbtree to iterate all mounts information.
Link: https://lkml.kernel.org/r/20240723064902.124154-4-kuan-ying.lee@canonical.com Fixes: 2eea9ce4310d ("mounts: keep list of mounts in an rbtree") Signed-off-by: Kuan-Ying Lee <kuan-ying.lee@canonical.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kuan-Ying Lee [Tue, 23 Jul 2024 06:48:58 +0000 (14:48 +0800)]
scripts/gdb: add iteration function for rbtree
Add inorder iteration function for rbtree usage.
This is a preparation patch for the next patch to fix the gdb mounts
issue.
Link: https://lkml.kernel.org/r/20240723064902.124154-3-kuan-ying.lee@canonical.com Fixes: 2eea9ce4310d ("mounts: keep list of mounts in an rbtree") Signed-off-by: Kuan-Ying Lee <kuan-ying.lee@canonical.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kuan-Ying Lee [Tue, 23 Jul 2024 06:48:57 +0000 (14:48 +0800)]
scripts/gdb: fix timerlist parsing issue
Patch series "Fix some GDB command error and add some GDB commands", v3.
Fix some GDB command errors and add some useful GDB commands.
This patch (of 5):
Commit 7988e5ae2be7 ("tick: Split nohz and highres features from
nohz_mode") and commit 7988e5ae2be7 ("tick: Split nohz and highres
features from nohz_mode") move 'tick_stopped' and 'nohz_mode' to flags
field which will break the gdb lx-mounts command:
(gdb) lx-timerlist
Python Exception <class 'gdb.error'>: There is no member named nohz_mode.
Error occurred in Python: There is no member named nohz_mode.
(gdb) lx-timerlist
Python Exception <class 'gdb.error'>: There is no member named tick_stopped.
Error occurred in Python: There is no member named tick_stopped.
We move 'tick_stopped' and 'nohz_mode' to flags field instead.
Julian Sun [Tue, 23 Jul 2024 09:11:54 +0000 (05:11 -0400)]
scripts: add macro_checker script to check unused parameters in macros
Recently, I saw a patch[1] on the ext4 mailing list regarding
the correction of a macro definition error. Jan mentioned
that "The bug in the macro is a really nasty trap...".
Because existing compilers are unable to detect
unused parameters in macro definitions. This inspired me
to write a script to check for unused parameters in
macro definitions and to run it.
Surprisingly, the script uncovered numerous issues across
various subsystems, including filesystems, drivers, and sound etc.
Some of these issues involved parameters that were accepted
but never used, for example:
#define XFS_DAENTER_DBS(mp,w) \
(XFS_DA_NODE_MAXDEPTH + (((w) == XFS_DATA_FORK) ? 2 : 0))
where mp was unused.
While others are actual bugs.
For example:
#define HAL_SEQ_WCSS_UMAC_CE0_SRC_REG(x) \
(ab->hw_params.regs->hal_seq_wcss_umac_ce0_src_reg)
#define HAL_SEQ_WCSS_UMAC_CE0_DST_REG(x) \
(ab->hw_params.regs->hal_seq_wcss_umac_ce0_dst_reg)
#define HAL_SEQ_WCSS_UMAC_CE1_SRC_REG(x) \
(ab->hw_params.regs->hal_seq_wcss_umac_ce1_src_reg)
#define HAL_SEQ_WCSS_UMAC_CE1_DST_REG(x) \
(ab->hw_params.regs->hal_seq_wcss_umac_ce1_dst_reg)
where x was entirely unused, and instead, a local variable ab was used.
I have submitted patches[2-5] to fix some of these issues,
but due to the large number, many still remain unaddressed.
I believe that the kernel and matainers would benefit from
this script to check for unused parameters in macro definitions.
It should be noted that it may cause some false positives
in conditional compilation scenarios, such as
#ifdef DEBUG
static int debug(arg) {};
#else
#define debug(arg)
#endif
So the caller needs to manually verify whether it is a true
issue. But this should be fine, because Maintainers should only
need to review their own subsystems, which typically results
in only a few reports.
[sunjunchao2870@gmail.com: reduce false positives] Link: https://lkml.kernel.org/r/20240726031310.254742-1-sunjunchao2870@gmail.com Link: https://lkml.kernel.org/r/20240723091154.52458-1-sunjunchao2870@gmail.com Signed-off-by: Julian Sun <sunjunchao2870@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Junchao Sun <sunjunchao2870@gmail.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Nicolas Schier <n.schier@avm.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lasse Collin [Wed, 24 Jul 2024 11:05:41 +0000 (14:05 +0300)]
xz: remove XZ_EXTERN and extern from functions
XZ_EXTERN was used to make internal functions static in the preboot code.
However, in other decompressors this hasn't been done. On x86-64, this
makes no difference to the kernel image size.
Omit XZ_EXTERN and let some of the internal functions be extern in the
preboot code. Omitting XZ_EXTERN from include/linux/xz.h fixes warnings
in "make htmldocs" and makes the intradocument links to xz_dec functions
work in Documentation/staging/xz.rst. The alternative would have been to
add "XZ_EXTERN" to c_id_attributes in Documentation/conf.py but omitting
XZ_EXTERN seemed cleaner.
Link: https://lore.kernel.org/lkml/20240723205437.3c0664b0@kaneli/ Link: https://lkml.kernel.org/r/20240724110544.16430-1-lasse.collin@tukaani.org Signed-off-by: Lasse Collin <lasse.collin@tukaani.org> Tested-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Cc: Jonathan Corbet <corbet@lwn.net> Cc: Sam James <sam@gentoo.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Jubin Zhong <zhongjubin@huawei.com> Cc: Jules Maselbas <jmaselbas@zdiv.net> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rui Li <me@lirui.org> Cc: Simon Glass <sjg@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20240721133633.47721-17-lasse.collin@tukaani.org Signed-off-by: Lasse Collin <lasse.collin@tukaani.org> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Jules Maselbas <jmaselbas@zdiv.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jubin Zhong <zhongjubin@huawei.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rui Li <me@lirui.org> Cc: Sam James <sam@gentoo.org> Cc: Simon Glass <sjg@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lasse Collin [Sun, 21 Jul 2024 13:36:30 +0000 (16:36 +0300)]
arm64: boot: add Image.xz support
The Image.* targets existed for other compressors already. Bootloader
support is needed for decompression.
This is for CONFIG_EFI_ZBOOT=n. With CONFIG_EFI_ZBOOT=y, XZ was already
available.
Link: https://lkml.kernel.org/r/20240721133633.47721-16-lasse.collin@tukaani.org Signed-off-by: Lasse Collin <lasse.collin@tukaani.org> Cc: Simon Glass <sjg@chromium.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Jules Maselbas <jmaselbas@zdiv.net> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jubin Zhong <zhongjubin@huawei.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rui Li <me@lirui.org> Cc: Sam James <sam@gentoo.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lasse Collin [Sun, 21 Jul 2024 13:36:29 +0000 (16:36 +0300)]
xz: adjust arch-specific options for better kernel compression
Use LZMA2 options that match the arch-specific alignment of instructions.
This change reduces compressed kernel size 0-2 % depending on the arch.
On 1-byte-aligned x86 it makes no difference and on 4-byte-aligned archs
it helps the most.
Use the ARM-Thumb filter for ARM-Thumb2 kernels. This reduces compressed
kernel size about 5 %.[1] Previously such kernels were compressed using
the ARM filter which didn't do anything useful with ARM-Thumb2 code.
Add BCJ filter support for ARM64 and RISC-V. Compared to unfiltered XZ or
plain LZMA, the compressed kernel size is reduced about 5 % on ARM64 and 7
% on RISC-V. A new enough version of the xz tool is required: 5.4.0 for
ARM64 and 5.6.0 for RISC-V. With an old xz version, a message is printed
to standard error and the kernel is compressed without the filter.
Update lib/decompress_unxz.c to match the changes to xz_wrap.sh.
Update the CONFIG_KERNEL_XZ help text in init/Kconfig:
- Add the RISC-V and ARM64 filters.
- Clarify that the PowerPC filter is for big endian only.
- Omit IA-64.
Link: https://lore.kernel.org/lkml/1637379771-39449-1-git-send-email-zhongjubin@huawei.com/ Link: https://lkml.kernel.org/r/20240721133633.47721-15-lasse.collin@tukaani.org Signed-off-by: Lasse Collin <lasse.collin@tukaani.org> Reviewed-by: Sam James <sam@gentoo.org> Cc: Simon Glass <sjg@chromium.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Jubin Zhong <zhongjubin@huawei.com> Cc: Jules Maselbas <jmaselbas@zdiv.net> Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rui Li <me@lirui.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lasse Collin [Sun, 21 Jul 2024 13:36:28 +0000 (16:36 +0300)]
xz: use 128 MiB dictionary and force single-threaded mode
This only affects kernel image compression, not any other xz usage.
Desktop kernels on x86-64 are already around 60 MiB. Using a dictionary
larger than 32 MiB should have no downsides nowadays as anyone building
the kernel should have plenty of RAM. 128 MiB dictionary needs 1346 MiB
of RAM with xz versions 5.0.x - 5.6.x in single-threaded mode. On archs
that use xz_wrap.sh, kernel decompression is done in single-call mode so a
larger dictionary doesn't affect boot-time memory requirements.
xz >= 5.6.0 uses multithreaded mode by default which compresses slightly
worse than single-threaded mode. Kernel compression rarely used more than
one thread anyway because with 32 MiB dictionary size the default block
size was 96 MiB in multithreaded mode. So only a single thread was used
anyway unless the kernel was over 96 MiB.
Comparison to CONFIG_KERNEL_LZMA: It uses "lzma -9" which mapped to 32 MiB
dictionary in LZMA Utils 4.32.7 (the final release in 2008). Nowadays the
lzma tool on most systems is from XZ Utils where -9 maps to 64 MiB
dictionary. So using a 32 MiB dictionary with CONFIG_KERNEL_XZ may have
compressed big kernels slightly worse than the old LZMA option.
Comparison to CONFIG_KERNEL_ZSTD: zstd uses 128 MiB dictionary.
Link: https://lkml.kernel.org/r/20240721133633.47721-14-lasse.collin@tukaani.org Signed-off-by: Lasse Collin <lasse.collin@tukaani.org> Reviewed-by: Sam James <sam@gentoo.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jubin Zhong <zhongjubin@huawei.com> Cc: Jules Maselbas <jmaselbas@zdiv.net> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rui Li <me@lirui.org> Cc: Simon Glass <sjg@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lasse Collin [Sun, 21 Jul 2024 13:36:27 +0000 (16:36 +0300)]
xz: add RISC-V BCJ filter
A later commit updates lib/decompress_unxz.c to enable this filter for
kernel decompression. lib/decompress_unxz.c is already used if
CONFIG_EFI_ZBOOT=y && CONFIG_KERNEL_XZ=y.
This filter can be used by Squashfs without modifications to the Squashfs
kernel code (only needs support in userspace Squashfs-tools).
Link: https://lkml.kernel.org/r/20240721133633.47721-13-lasse.collin@tukaani.org Signed-off-by: Lasse Collin <lasse.collin@tukaani.org> Reviewed-by: Sam James <sam@gentoo.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jubin Zhong <zhongjubin@huawei.com> Cc: Jules Maselbas <jmaselbas@zdiv.net> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rui Li <me@lirui.org> Cc: Simon Glass <sjg@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lasse Collin [Sun, 21 Jul 2024 13:36:26 +0000 (16:36 +0300)]
xz: Add ARM64 BCJ filter
Also omit a duplicated check for XZ_DEC_ARM in xz_private.h.
A later commit updates lib/decompress_unxz.c to enable this filter for
kernel decompression. lib/decompress_unxz.c is already used if
CONFIG_EFI_ZBOOT=y && CONFIG_KERNEL_XZ=y.
This filter can be used by Squashfs without modifications to the Squashfs
kernel code (only needs support in userspace Squashfs-tools).
Link: https://lkml.kernel.org/r/20240721133633.47721-12-lasse.collin@tukaani.org Signed-off-by: Lasse Collin <lasse.collin@tukaani.org> Reviewed-by: Sam James <sam@gentoo.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jubin Zhong <zhongjubin@huawei.com> Cc: Jules Maselbas <jmaselbas@zdiv.net> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rui Li <me@lirui.org> Cc: Simon Glass <sjg@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lasse Collin [Sun, 21 Jul 2024 13:36:25 +0000 (16:36 +0300)]
xz: optimize for-loop conditions in the BCJ decoders
Compilers cannot optimize the addition "i + 4" away since theoretically it
could overflow.
Link: https://lkml.kernel.org/r/20240721133633.47721-11-lasse.collin@tukaani.org Signed-off-by: Lasse Collin <lasse.collin@tukaani.org> Reviewed-by: Sam James <sam@gentoo.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jubin Zhong <zhongjubin@huawei.com> Cc: Jules Maselbas <jmaselbas@zdiv.net> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rui Li <me@lirui.org> Cc: Simon Glass <sjg@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lasse Collin [Sun, 21 Jul 2024 13:36:24 +0000 (16:36 +0300)]
xz: cleanup CRC32 edits from 2018
In 2018, a dependency on <linux/crc32poly.h> was added to avoid
duplicating the same constant in multiple files. Two months later it was
found to be a bad idea and the definition of CRC32_POLY_LE macro was moved
into xz_private.h to avoid including <linux/crc32poly.h>.
xz_private.h is a wrong place for it too. Revert back to the upstream
version which has the poly in xz_crc32_init() in xz_crc32.c.
Link: https://lkml.kernel.org/r/20240721133633.47721-10-lasse.collin@tukaani.org Fixes: faa16bc404d7 ("lib: Use existing define with polynomial") Fixes: 242cdad873a7 ("lib/xz: Put CRC32_POLY_LE in xz_private.h") Signed-off-by: Lasse Collin <lasse.collin@tukaani.org> Reviewed-by: Sam James <sam@gentoo.org> Tested-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jubin Zhong <zhongjubin@huawei.com> Cc: Jules Maselbas <jmaselbas@zdiv.net> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rui Li <me@lirui.org> Cc: Simon Glass <sjg@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Omit xz_dec_test info. That isn't relevant to developers of non-XZ code.
Revise the docs about xzkern and add xzkern_with_size. The latter was
added to scripts/Makefile.lib in the commit 7ce7e984ab2b ("kbuild: rename
cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22}").
Omit contact info as MAINTAINERS has it.
Omit other info that is outdated or not relevant in the kernel context.
Include the xz_dec kernel-doc from include/linux/xz.h.
Link: https://lkml.kernel.org/r/20240721133633.47721-8-lasse.collin@tukaani.org Signed-off-by: Lasse Collin <lasse.collin@tukaani.org> Reviewed-by: Sam James <sam@gentoo.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Cc: Rui Li <me@lirui.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jubin Zhong <zhongjubin@huawei.com> Cc: Jules Maselbas <jmaselbas@zdiv.net> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Simon Glass <sjg@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lasse Collin [Sun, 21 Jul 2024 13:36:21 +0000 (16:36 +0300)]
xz: improve the MicroLZMA kernel-doc in xz.h
Move the description of the format into a "DOC:" comment. Emphasize that
MicroLZMA functions aren't usually needed.
Link: https://lkml.kernel.org/r/20240721133633.47721-7-lasse.collin@tukaani.org Signed-off-by: Lasse Collin <lasse.collin@tukaani.org> Reviewed-by: Sam James <sam@gentoo.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jubin Zhong <zhongjubin@huawei.com> Cc: Jules Maselbas <jmaselbas@zdiv.net> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rui Li <me@lirui.org> Cc: Simon Glass <sjg@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lasse Collin [Sun, 21 Jul 2024 13:36:20 +0000 (16:36 +0300)]
xz: fix kernel-doc formatting errors in xz.h
The opaque structs xz_dec and xz_dec_microlzma are declared in xz.h but
their definitions are in xz_dec_lzma2.c without kernel-doc comments. Use
regular comments for these structs in xz.h to avoid errors when building
the docs.
Add a few missing colons.
Link: https://lkml.kernel.org/r/20240721133633.47721-6-lasse.collin@tukaani.org Signed-off-by: Lasse Collin <lasse.collin@tukaani.org> Reviewed-by: Sam James <sam@gentoo.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jubin Zhong <zhongjubin@huawei.com> Cc: Jules Maselbas <jmaselbas@zdiv.net> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rui Li <me@lirui.org> Cc: Simon Glass <sjg@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lasse Collin [Sun, 21 Jul 2024 13:36:19 +0000 (16:36 +0300)]
xz: fix comments and coding style
- Fix comments that were no longer in sync with the code below them.
- Fix language errors.
- Fix coding style.
Link: https://lkml.kernel.org/r/20240721133633.47721-5-lasse.collin@tukaani.org Signed-off-by: Lasse Collin <lasse.collin@tukaani.org> Reviewed-by: Sam James <sam@gentoo.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jubin Zhong <zhongjubin@huawei.com> Cc: Jules Maselbas <jmaselbas@zdiv.net> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rui Li <me@lirui.org> Cc: Simon Glass <sjg@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lasse Collin [Sun, 21 Jul 2024 13:36:18 +0000 (16:36 +0300)]
xz: switch from public domain to BSD Zero Clause License (0BSD)
Remove the public domain notices and add SPDX license identifiers.
Change MODULE_LICENSE from "GPL" to "Dual BSD/GPL" because 0BSD should
count as a BSD license variant here.
The switch to 0BSD was done in the upstream XZ Embedded project because
public domain has (real or perceived) legal issues in some jurisdictions.
Link: https://lkml.kernel.org/r/20240721133633.47721-4-lasse.collin@tukaani.org Signed-off-by: Lasse Collin <lasse.collin@tukaani.org> Reviewed-by: Sam James <sam@gentoo.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jubin Zhong <zhongjubin@huawei.com> Cc: Jules Maselbas <jmaselbas@zdiv.net> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rui Li <me@lirui.org> Cc: Simon Glass <sjg@chromium.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lasse Collin [Sun, 21 Jul 2024 13:36:17 +0000 (16:36 +0300)]
LICENSES: add 0BSD license text
The license text was copied from:
https://spdx.org/licenses/0BSD.html
Link: https://lkml.kernel.org/r/20240721133633.47721-3-lasse.collin@tukaani.org Signed-off-by: Lasse Collin <lasse.collin@tukaani.org> Reviewed-by: Sam James <sam@gentoo.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jubin Zhong <zhongjubin@huawei.com> Cc: Jules Maselbas <jmaselbas@zdiv.net> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rui Li <me@lirui.org> Cc: Simon Glass <sjg@chromium.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lasse Collin [Sun, 21 Jul 2024 13:36:16 +0000 (16:36 +0300)]
MAINTAINERS: add XZ Embedded maintainer
Patch series "xz: Updates to license, filters, and compression options",
v2.
XZ Embedded, the upstream project, switched from public domain to the BSD
Zero Clause License (0BSD). Now matching SPDX license identifiers can be
added.
Documentation was revised. Fix syntax errors in kernel-doc comments in
<linux/xz.h>. The xz_dec API docs from <linux/xz.h> are now included in
Documentation/staging/xz.rst.
The new ARM64 and RISC-V filters can be used for kernel decompression if
CONFIG_EFI_ZBOOT=y. The filters can be used by Squashfs too. (Userspace
Squashfs-tools already had the ARM64 filter support committed but it was
reverted due to backdoor fears. I try to get ARM64 and RISC-V filter
support added to Squashfs-tools somewhat soon.)
Account for the default threading change made in the xz command line tool
version 5.6.0. Tweak kernel compression options for archs that support XZ
compressed kernel.
This patch (of 16):
I have been the maintainer of the upstream project since I submitted the
code to Linux in 2010 but I forgot to add myself to MAINTAINERS.
Link: https://lkml.kernel.org/r/20240721133633.47721-1-lasse.collin@tukaani.org Link: https://lkml.kernel.org/r/20240721133633.47721-2-lasse.collin@tukaani.org Signed-off-by: Lasse Collin <lasse.collin@tukaani.org> Reviewed-by: Sam James <sam@gentoo.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jubin Zhong <zhongjubin@huawei.com> Cc: Jules Maselbas <jmaselbas@zdiv.net> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rui Li <me@lirui.org> Cc: Simon Glass <sjg@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ocfs2: fix the la space leak when unmounting an ocfs2 volume
This bug has existed since the initial OCFS2 code. The code logic in
ocfs2_sync_local_to_main() is wrong, as it ignores the last contiguous
free bits, which causes an OCFS2 volume to lose the last free clusters of
LA window on each umount command.
Link: https://lkml.kernel.org/r/20240719114310.14245-1-heming.zhao@suse.com Signed-off-by: Heming Zhao <heming.zhao@suse.com> Reviewed-by: Su Yue <glass.su@suse.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: Heming Zhao <heming.zhao@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kexec: use atomic_try_cmpxchg_acquire() in kexec_trylock()
Use atomic_try_cmpxchg_acquire(*ptr, &old, new) instead of
atomic_cmpxchg_acquire(*ptr, old, new) == old in kexec_trylock().
x86 CMPXCHG instruction returns success in ZF flag, so
this change saves a compare after cmpxchg.
Nicolas Pitre [Sun, 7 Jul 2024 19:05:19 +0000 (15:05 -0400)]
mul_u64_u64_div_u64: make it precise always
Patch series "mul_u64_u64_div_u64: new implementation", v3.
This provides an implementation for mul_u64_u64_div_u64() that always
produces exact results.
This patch (of 2):
Library facilities must always return exact results. If the caller may be
contented with approximations then it should do the approximation on its
own.
In this particular case the comment in the code says "the algorithm
... below might lose some precision". Well, if you try it with e.g.:
then the produced answer is 0 whereas the exact answer should be 18446462598732840959. This is _some_ precision lost indeed!
Let's reimplement this function so it always produces the exact result
regardless of its inputs while preserving existing fast paths when
possible.
Uwe said:
: My personal interest is to get the calculations in pwm drivers right.
: This function is used in several drivers below drivers/pwm/ . With the
: errors in mul_u64_u64_div_u64(), pwm consumers might not get the
: settings they request. Although I have to admit that I'm not aware it
: breaks real use cases (because typically the periods used are too short
: to make the involved multiplications overflow), but I pretty sure am
: not aware of all usages and it breaks testing.
:
: Another justification is commits like
: https://git.kernel.org/tip/77baa5bafcbe1b2a15ef9c37232c21279c95481c,
: where people start to work around the precision shortcomings of
: mul_u64_u64_div_u64().
Merge tag 'v6.11-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- copy_file_range fix
- two read fixes including read past end of file rc fix and read retry
crediting fix
- falloc zero range fix
* tag 'v6.11-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix FALLOC_FL_ZERO_RANGE to preflush buffered part of target region
cifs: Fix copy offload to flush destination region
netfs, cifs: Fix handling of short DIO read
cifs: Fix lack of credit renegotiation on read retry
Merge tag 'bcachefs-2024-08-21' of https://github.com/koverstreet/bcachefs
Push bcachefs fixes from Kent Overstreet:
"The data corruption in the buffered write path is troubling; inode
lock should not have been able to cause that...
- Fix a rare data corruption in the rebalance path, caught as a nonce
inconsistency on encrypted filesystems
- Revert lockless buffered write path
- Mark more errors as autofix"
* tag 'bcachefs-2024-08-21' of https://github.com/koverstreet/bcachefs:
bcachefs: Mark more errors as autofix
bcachefs: Revert lockless buffered IO path
bcachefs: Fix bch2_extents_match() false positive
bcachefs: Fix failure to return error in data_update_index_update()
Kent Overstreet [Thu, 22 Aug 2024 15:47:32 +0000 (11:47 -0400)]
bcachefs: Mark more errors as autofix
errors that are known to always be safe to fix should be autofix: this
should be most errors even at this point, but that will need some
thorough review.
note that errors are still logged in the superblock, so we'll still know
that they happened.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
It seems that writes are being dropped, but only when issued by QEMU,
and possibly only in snapshot mode. It's undetermined if it's write
calls are being dropped or dirty folios.
Further testing, via minimizing the original patch to just the change
that skips the inode lock on non appends/truncates, reveals that it
really is just not taking the inode lock that causes the corruption: it
has nothing to do with the other logic changes for preserving write
atomicity in corner cases.
It's also kernel config dependent: it doesn't reproduce with the minimal
kernel config that ktest uses, but it does reproduce with nixos's distro
config. Bisection the kernel config initially pointer the finger at page
migration or compaction, but it appears that was erroneous; we haven't
yet determined what kernel config option actually triggers it.
Sadly it appears this will have to be reverted since we're getting too
close to release and my plate is full, but we'd _really_ like to fully
debug it.
My suspicion is that this patch is exposing a preexisting bug - the
inode lock actually covers very little in IO paths, and we have a
different lock (the pagecache add lock) that guards against races with
truncate here.
Fixes: 7e64c86cdc6c ("bcachefs: Buffered write path now can avoid the inode lock") Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Linus Torvalds [Sat, 31 Aug 2024 21:18:48 +0000 (09:18 +1200)]
Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull misc fixes from Guenter Roeck.
These are fixes for regressions that Guenther has been reporting, and
the maintainers haven't picked up and sent in. With rc6 fairly imminent,
I'm taking them directly from Guenter.
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
apparmor: fix policy_unpack_test on big endian systems
Revert "MIPS: csrc-r4k: Apply verification clocksource flags"
microblaze: don't treat zero reserved memory regions as error
Linus Torvalds [Sat, 31 Aug 2024 21:07:44 +0000 (09:07 +1200)]
Merge tag 'pwrseq-fixes-for-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing fix from Bartosz Golaszewski:
"A follow-up fix for the power sequencing subsystem. It turned out the
previous fix for this driver was incomplete and broke the WLAN support
on some platforms. This addresses the issue.
- set the direction of the wlan-enable GPIO to output after
requesting it as-is"
* tag 'pwrseq-fixes-for-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: qcom-wcn: set the wlan-enable GPIO to output
Bartosz Golaszewski [Fri, 23 Aug 2024 11:55:00 +0000 (13:55 +0200)]
power: sequencing: qcom-wcn: set the wlan-enable GPIO to output
Commit a9aaf1ff88a8 ("power: sequencing: request the WLAN enable GPIO
as-is") broke WLAN on boards on which the wlan-enable GPIO enabling the
wifi module isn't in output mode by default. We need to set direction to
output while retaining the value that was already set to keep the ath
module on if it's already started.
Linus Torvalds [Sat, 31 Aug 2024 19:00:38 +0000 (07:00 +1200)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Minor fixes only.
The sd.c one ignores a sync cache request if format is in progress
which can happen if formatting a drive across suspend/resume"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Ignore command SYNCHRONIZE CACHE error if format in progress
scsi: aacraid: Fix double-free on probe failure
scsi: lpfc: Fix overflow build issue
Linus Torvalds [Sat, 31 Aug 2024 18:55:47 +0000 (06:55 +1200)]
Merge tag 'nfsd-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- One more write delegation fix
* tag 'nfsd-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: fix nfsd4_deleg_getattr_conflict in presence of third party lease
Linus Torvalds [Sat, 31 Aug 2024 18:48:37 +0000 (06:48 +1200)]
Merge tag 'xfs-6.11-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Chandan Babu:
- Do not call out v1 inodes with non-zero di_nlink field as being
corrupt
- Change xfs_finobt_count_blocks() to count "free inode btree" blocks
rather than "inode btree" blocks
- Don't report the number of trimmed bytes via FITRIM because the
underlying storage isn't required to do anything and failed discard
IOs aren't reported to the caller anyway
- Fix incorrect setting of rm_owner field in an rmap query
- Report missing disk offset range in an fsmap query
- Obtain m_growlock when extending realtime section of the filesystem
- Reset rootdir extent size hint after extending realtime section of
the filesystem
* tag 'xfs-6.11-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: reset rootdir extent size hint after growfsrt
xfs: take m_growlock when running growfsrt
xfs: Fix missing interval for missing_owner in xfs fsmap
xfs: use XFS_BUF_DADDR_NULL for daddrs in getfsmap code
xfs: Fix the owner setting issue for rmap query in xfs fsmap
xfs: don't bother reporting blocks trimmed via FITRIM
xfs: xfs_finobt_count_blocks() walks the wrong btree
xfs: fix folio dirtying for XFILE_ALLOC callers
xfs: fix di_onlink checking for V1/V2 inodes
Linus Torvalds [Sat, 31 Aug 2024 18:42:13 +0000 (06:42 +1200)]
Merge tag 'arm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There is a fairly large number of bug fixes for Qualcomm platforms,
most of them addressing issues with the devicetree files for the newly
added Snapdragon X1 based laptops to make them more reliable.
The Qualcomm driver changes address a few build-time issues as well as
runtime problems in the tzmem and scm firmware, the USB Type-C driver,
and the cmd-db and pmic_glink soc drivers.
The NXP i.MX usually gets a bunch of devicetree fixes that is
proportional to the number of supported machines. This includes both
warning fixes and correctness for the 64-bit i.MX9, i.MX8 and
layerscape platforms, as well as a single fix for a 32-bit i.MX6 based
board.
The other changes are the usual minor changes, including an update to
the MAINTAINERS file, an omap3 dts file and a SoC driver for mpfs
(risc-v)"
* tag 'arm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
firmware: microchip: fix incorrect error report of programming:timeout on success
soc: qcom: pd-mapper: Fix singleton refcount
firmware: qcom: tzmem: disable sdm670 platform
soc: qcom: pmic_glink: Actually communicate when remote goes down
usb: typec: ucsi: Move unregister out of atomic section
soc: qcom: pmic_glink: Fix race during initialization
firmware: qcom: qseecom: remove unused functions
firmware: qcom: tzmem: fix virtual-to-physical address conversion
firmware: qcom: scm: Mark get_wq_ctx() as atomic call
arm64: dts: qcom: x1e80100: Fix Adreno SMMU global interrupt
arm64: dts: qcom: disable GPU on x1e80100 by default
arm64: dts: imx8mm-phygate: fix typo pinctrcl-0
arm64: dts: imx95: correct L3Cache cache-sets
arm64: dts: imx95: correct a55 power-domains
arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo
arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges
ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design
arm64: dts: imx93: update default value for snps,clk-csr
arm64: dts: freescale: tqma9352: Fix watchdog reset
arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962
...
Linus Torvalds [Sat, 31 Aug 2024 03:32:38 +0000 (15:32 +1200)]
Merge tag 'input-for-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fix from Dmitry Torokhov:
- a fix for Cypress PS/2 touchpad for regression introduced in 6.11
merge window where a timeout condition is incorrectly reported for
all extended Cypress commands
* tag 'input-for-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cypress_ps2 - fix waiting for command response
Linus Torvalds [Sat, 31 Aug 2024 02:54:11 +0000 (14:54 +1200)]
Merge tag 'pci-v6.11-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Add Manivannan Sadhasivam as PCI native host bridge and endpoint
driver reviewer (Manivannan Sadhasivam)
- Disable MHI RAM data parity error interrupt for qcom SA8775P SoC to
work around hardware erratum that causes a constant stream of
interrupts (Manivannan Sadhasivam)
- Don't try to fall back to qcom Operating Performance Points (OPP)
support unless the platform actually supports OPP (Manivannan
Sadhasivam)
- Add imx@lists.linux.dev mailing list to MAINTAINERS for NXP
layerscape and imx6 PCI controller drivers (Frank Li)
* tag 'pci-v6.11-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
MAINTAINERS: PCI: Add NXP PCI controller mailing list imx@lists.linux.dev
PCI: qcom: Use OPP only if the platform supports it
PCI: qcom-ep: Disable MHI RAM data parity error interrupt for SA8775P SoC
MAINTAINERS: Add Manivannan Sadhasivam as Reviewer for PCI native host bridge and endpoint drivers
Linus Torvalds [Sat, 31 Aug 2024 01:51:27 +0000 (13:51 +1200)]
Merge tag 'io_uring-6.11-20240830' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- A fix for a regression that happened in 6.11 merge window, where the
copying of iovecs for compat mode applications got broken for certain
cases.
- Fix for a bug introduced in 6.10, where if using recv/send bundles
with classic provided buffers, the recv/send would fail to set the
right iovec count. This caused 0 byte send/recv results. Found via
code coverage testing and writing a test case to exercise it.
* tag 'io_uring-6.11-20240830' of git://git.kernel.dk/linux:
io_uring/kbuf: return correct iovec count from classic buffer peek
io_uring/rsrc: ensure compat iovecs are copied correctly
Linus Torvalds [Fri, 30 Aug 2024 18:33:59 +0000 (06:33 +1200)]
Merge tag 'lsm-pr-20240830' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm fix from Paul Moore:
"One small patch to correct a NFS permissions problem with SELinux and
Smack"
* tag 'lsm-pr-20240830' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
selinux,smack: don't bypass permissions check in inode_setsecctx hook
Linus Torvalds [Fri, 30 Aug 2024 18:25:34 +0000 (06:25 +1200)]
Merge tag 'pm-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix three issues in the amd-pstate cpufreq driver.
Specifics:
- Remove checks for highest performance match on preferred cores when
updating preferred core ranking in amd-pstate (Mario Limonciello)
- Make amd-pstate call topology_logical_package_id() instead of
logical_die_id() to get a socked ID for a CPU (Gautham Shenoy)
- Fix uninitialized variable in amd_pstate_cpu_boost_update() (Dan
Carpenter)"
* tag 'pm-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate-ut: Don't check for highest perf matching on prefcore
cpufreq/amd-pstate: Use topology_logical_package_id() instead of logical_die_id()
cpufreq: amd-pstate: Fix uninitialized variable in amd_pstate_cpu_boost_update()
Linus Torvalds [Fri, 30 Aug 2024 18:15:02 +0000 (06:15 +1200)]
Merge tag 'soundwire-6.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fix from Vinod Koul:
- Single fix for non-continous port map programming
* tag 'soundwire-6.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: stream: fix programming slave ports for non-continous port maps
Linus Torvalds [Fri, 30 Aug 2024 18:11:34 +0000 (06:11 +1200)]
Merge tag 'iommu-fixes-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Fix a device-stall problem in bad io-page-fault setups (faults
received from devices with no supporting domain attached).
- Context flush fix for Intel VT-d.
- Do not allow non-read+non-write mapping through iommufd as most
implementations can not handle that.
- Fix a possible infinite-loop issue in map_pages() path.
- Add Jean-Philippe as reviewer for SMMUv3 SVA support
* tag 'iommu-fixes-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
MAINTAINERS: Add Jean-Philippe as SMMUv3 SVA reviewer
iommu: Do not return 0 from map_pages if it doesn't do anything
iommufd: Do not allow creating areas without READ or WRITE
iommu/vt-d: Fix incorrect domain ID in context flush helper
iommu: Handle iommu faults for a bad iopf setup
Jens Axboe [Fri, 30 Aug 2024 16:45:54 +0000 (10:45 -0600)]
io_uring/kbuf: return correct iovec count from classic buffer peek
io_provided_buffers_select() returns 0 to indicate success, but it should
be returning 1 to indicate that 1 vec was mapped. This causes peeking
to fail with classic provided buffers, and while that's not a use case
that anyone should use, it should still work correctly.
The end result is that no buffer will be selected, and hence a completion
with '0' as the result will be posted, without a buffer attached.
NeilBrown [Wed, 28 Aug 2024 23:06:28 +0000 (09:06 +1000)]
nfsd: fix nfsd4_deleg_getattr_conflict in presence of third party lease
It is not safe to dereference fl->c.flc_owner without first confirming
fl->fl_lmops is the expected manager. nfsd4_deleg_getattr_conflict()
tests fl_lmops but largely ignores the result and assumes that flc_owner
is an nfs4_delegation anyway. This is wrong.
With this patch we restore the "!= &nfsd_lease_mng_ops" case to behave
as it did before the change mentioned below. This is the same as the
current code, but without any reference to a possible delegation.
Fixes: c5967721e106 ("NFSD: handle GETATTR conflict with write delegation") Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
projects / users / jedix / linux-maple.git / log