drm/nouveau/gsp: add hal for disp.get_active()

555.42.02 has incompatible changes to NV0073_CTRL_CMD_SYSTEM_GET_ACTIVE.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: add hal for disp.get_connect_state()

555.42.02 has incompatible changes to
NV0073_CTRL_CMD_SYSTEM_GET_CONNECT_STATE.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: add hal for disp.get_supported()

555.42.02 has incompatible changes to
NV0073_CTRL_CMD_SYSTEM_GET_SUPPORTED.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: add hals for fbsr.suspend/resume()

555.42.02 has incompatible changes to FBSR.

At the same time, move the calling of FBSR functions from the instmem
subdev's suspend/resume paths, to GSP's.  This is needed to fix ordering
issues that arise from changes to FBSR in newer RM versions.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: add hal for gsp.set_rmargs()

555.42.02 has incompatible changes to GSP_ARGUMENTS_CACHED.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: add hal for gr.get_ctxbufs_info()

NV2080_CTRL_CMD_INTERNAL_STATIC_KGR_GET_CONTEXT_BUFFERS_INFO has
incompatible changes in 550.40.07.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: add hal for fifo.ectx_size()

NV2080_CTRL_CMD_INTERNAL_GET_CONSTRUCTED_FALCON_INFO is moved to
NV2080_CTRL_CMD_GPU_GET_CONSTRUCTED_FALCON_INFO in 550.40.07.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: add hal for fifo.xlat_rm_engine_type()

550.40.07 has incompatible changes to RM_ENGINE_TYPE defines.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: add hal for disp.chan.set_pushbuf()

550.40.07 has incompatible changes to
NV2080_CTRL_CMD_INTERNAL_DISPLAY_CHANNEL_PUSHBUFFER.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: add hal for disp.get_static_info()

550.40.07 has incompatible changes to
NV2080_CTRL_CMD_INTERNAL_DISPLAY_GET_STATIC_INFO.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: add hal for disp.dp.set_indexed_link_rates()

545.23.06 has incompatible changes to
NV0073_CTRL_CMD_DP_CONFIG_INDEXED_LINK_RATES.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: add hal for disp.bl_ctrl()

545.23.06 has incompatible changes to
NV0073_CTRL_SPECIFIC_BACKLIGHT_BRIGHTNESS_PARAMS.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: add hal for gsp.drop_send_user_shared_data()

545.23.06 removes NV_VGPU_MSG_EVENT_GSP_SEND_USER_SHARED_DATA, but has
another event (NVLINK_FAULT_UP) in its place.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: add hal for gsp.xlat_mc_engine_idx()

545.23.06 has incompatible changes to MC_ENGINE_IDX definitions.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: add hal for gsp.get_static_info()

545.23.06 has incompatible changes to a number of definitions that
impact the layout of GspStaticConfigInfo.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: add hal for gsp.set_system_info()

545.23.06 has incompatible changes to GspSystemInfo.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: add hal for wpr config info + meta init

545.23.06 increases the libos3 heap size requirements, and GH100/GBxxx
will need their own implementation entirely.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: add defines for rmapi object handles

Add header containing defines for RMAPI handles used by NVKM, and
use them in place of magic values when calling RM_ALLOC.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: add common code for engines/engine objects

With minimal to no direct HW programming required, most nvkm_engine
implementations are nearly identical when running on top of GSP-RM.

Add a common implementation of the boilerplate, and use nvkm_rm_gpu to
expose the correct class IDs.

As they're now handled by common code, and there's no support for them
prior to GSP-RM support - this deletes the GA100 NVDEC/NVJPG/OFA HALs,
the GA102 NVENC/OFA HALs, and the AD102 GR/NVDEC/NVENC/NVJPG/OFA HALs.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: add channel class id to gpu hal

Use channel class ID from nvkm_rm_gpu, instead of copying it from the
non-GSP HALs.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: add usermode class id to gpu hal

Use usermode class ID from nvkm_rm_gpu, instead of copying it from the
non-GSP HALs.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: add display class ids to gpu hal

Use display class IDs from nvkm_rm_gpu, instead of copying them from the
non-GSP HALs.

Removes the AD102 display HAL, which is no longer required as there's no
support for it without GSP-RM.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: add gpu hal stubs

With GSP-RM handling the majority of the HW programming, NVKM's usual
HALs are more elaborate than necessary, resulting in a fair amount of
duplicated boilerplate.

Adds 'nvkm_rm_gpu' which serves to provide GPU-specific constants and
functions in a more streamlined manner.

This is initially used in subsequent commits to store engine class IDs,
and replace the per-engine/engobj boilerplate with common code for all
GSP-RM supported engines - and is further extended when adding GH100,
GB10x and GB20x support.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: switch to a simpler GSP-RM header layout

Rather than using OpenRM's directory structure for headers, move to a
layout that's split roughly around RM API boundaries.

Also move the headers from include/nvrm to subdev/gsp/rm/r535/nvrm,
with the rest of the r535-specific code.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: move subdev/engine impls to subdev/gsp/rm/r535/

Move all the remaining GSP-RM code together underneath a versioned path,
to make the code easier to work with when adding support for a newer RM
version.

Aside from adjusting include paths, no code change is intended.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: move booter handling to GPU-specific code

GH100/GBxxx have significant changes to the GSP-RM boot process.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: move firmware loading to GPU-specific code

GH100/GBxxx use a slightly different set of firmwares to boot GSP-RM.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: split device handling out on its own

Split handling of NV01_DEVICE (and other related objects) out into its
own module.

Aside from moving the function pointers, no code change is intended.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: split client handling out on its own

Split NV01_ROOT handling out into its own module.

Aside from moving the function pointers, no code change is intended.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: split rm alloc handling out on its own

Split base RM_ALLOC handling out into its own module.

Aside from moving the function pointers, no code change is intended.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: split rm ctrl handling out on its own

Split base RM_CONTROL handling out into its own module.

Aside from moving the function pointers, no code change is intended.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: split rpc handling out on its own

Later patches in the series add HALs around various RM APIs in order to
support a newer version of GSP-RM firmware.  In order to do this, begin
by splitting the code up into "modules" that roughly represent RM's API
boundaries so they can be more easily managed.

Aside from moving the RPC function pointers, no code change is indended.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/ofa: bump max instances to 2

560.28.03 supports more NVENC instances.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/nvenc: bump max instances to 4

570.86.16 supports more NVENC instances.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/ce: bump max instances to 20

560.28.03 supports more copy engine instances.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: remove gsp-specific chid allocation path

In order to specify a channel ID to RM during channel allocation, the
channel ID is broken down into a "userd page" index and an index into
that page.

It was assumed that RM would enforce that the same physical block of
memory be used for all CHIDs within a "userd page", and the GSP paths
override NVKM's normal CHID allocation to handle this.

However, none of that turns out to be necessary.

Remove the GSP-specific code and use the regular CHID allocation path.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/gsp: fix rm shutdown wait condition

Though the initial upstreamed GSP-RM version in nouveau was 535.113.01,
the code was developed against earlier versions.

535.42.02 modified the mailbox value used by GSP-RM to signal shutdown
has completed, which was missed at the time.

I'm not aware of any issues caused by this, but noticed the bug while
working on GB20x support.

Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'drm-intel-next-fixes-2025-05-15' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next

- Stop writing ALPM registers when PSR is enabled
- Use the correct connector while computing the link BPP limit on MST

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://lore.kernel.org/r/aCWlWk5rTE7TH1pN@jlahtine-mobl

Merge tag 'mediatek-drm-next-20250515' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next

Mediatek DRM Next - 20250515

1. Prepare for support MT8195/88 HDMIv2 and DDCv2
2. DPI: Cleanups and add support for more formats
3. Cleanups and sanitization
4. Replace custom compare_dev with component_compare_of

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20250514233647.15907-1-chunkuang.hu@kernel.org

Merge tag 'drm-misc-next-2025-05-12' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next

drm-misc-next for v6.16-rc1:

Once more, with async flips.

UAPI Changes:
- Add IN_FORMATS_ASYNC property, use in i915.

Cross-subsystem Changes:
- Remove some unused debug code in dma-buf.

Core Changes:

Driver Changes:
- Add Novatek NT37801 panel.
- Allow submitting empty commands in amdxdna.
- Convert cirrus to use managed request_all_regions.
- Move Sitronix from tiny to their own place.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/23ded62c-6a62-4195-9c08-4dfb81eafd72@linux.intel.com

drm/mediatek: Replace custom compare_dev with component_compare_of

Remove the custom device comparison function compare_dev and replace it
with the existing kernel helper component_compare_of

Signed-off-by: Tang Dongxing <tang.dongxing@zte.com.cn>
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250403155419406T5YhIJKId1FWor70EWWHG@zte.com.cn/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: mtk_drm_drv: Unbind secondary mmsys components on err

When calling component_bind_all(), if a component that is included
in the list fails, all of those that have been successfully bound
will be unbound, but this driver has two components lists for two
actual devices, as in, each mmsys instance has its own components
list.

In case mmsys0 (or actually vdosys0) is able to bind all of its
components, but the secondary one fails, all of the components of
the first are kept bound, while the ones of mmsys1/vdosys1 are
correctly cleaned up.

This is not right because, in case of a failure, the components
are re-bound for all of the mmsys/vdosys instances without caring
about the ones that were previously left in a bound state.

Fix that by calling component_unbind_all() on all of the previous
component masters that succeeded binding all subdevices when any
of the other masters errors out.

Fixes: 1ef7ed48356c ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support")
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250403104741.71045-4-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Fix kobject put for component sub-drivers

In function mtk_drm_get_all_drm_priv(), this driver is incrementing
the refcount for the sub-drivers of mediatek-drm with a call to
device_find_child() when taking a reference to all of those child
devices.

When the component bind fails multiple times this results in a
refcount_t overflow, as the reference count is never decremented:
fix that by adding a call to put_device() for all of the mmsys
devices in a loop, in error cases of mtk_drm_bind() and in the
mtk_drm_unbind() callback.

Fixes: 1ef7ed48356c ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support")
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250403104741.71045-3-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: mtk_drm_drv: Fix kobject put for mtk_mutex device ptr

This driver is taking a kobject for mtk_mutex only once per mmsys
device for each drm-mediatek driver instance, differently from the
behavior with other components, but it is decrementing the kobj's
refcount in a loop and once per mmsys: this is not right and will
result in a refcount_t underflow warning when mediatek-drm returns
multiple probe deferrals in one boot (or when manually bound and
unbound).

Besides that, the refcount for mutex_dev was not decremented for
error cases in mtk_drm_bind(), causing another refcount_t warning
but this time for overflow, when the failure happens not during
driver bind but during component bind.

In order to fix one of the reasons why this is happening, remove
the put_device(xx->mutex_dev) loop from the mtk_drm_kms_init()'s
put_mutex_dev label (and drop the label) and add a single call to
correctly free the single incremented refcount of mutex_dev to
the mtk_drm_unbind() function to fix the refcount_t underflow.

Moreover, add the same call to the error cases in mtk_drm_bind()
to fix the refcount_t overflow.

Fixes: 1ef7ed48356c ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support")
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250403104741.71045-2-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/i915/alpm: Stop writing ALPM registers when PSR is enabled

Currently we are seeing these on PTL:

xe 0000:00:02.0: [drm] *ERROR* Timeout waiting for DDI BUF A to get active

These seem to be caused by writing ALPM registers while Panel Replay is
enabled.

Fix this by writing ALPM registers only when Panel Replay is about to be
enabled.

v4: improve comment on intel_psr_panel_replay_enable_sink call
v3: enable/disable ALPM from PSR code

Fixes: 172757acd6f6 ("drm/i915/lobf: Add lobf enablement in post plane update")
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250513054814.3702977-3-jouni.hogander@intel.com
(cherry picked from commit a8eb102ce0944a9de2a62aa9d195861b7f26668a)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/alpm: Make intel_alpm_enable_sink available for PSR

We want to enable sink ALPM from PSR code. Make intel_alpm_enable_sink
available for PSR.

v2: do not add kerneldoc comments

Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250513054814.3702977-2-jouni.hogander@intel.com
(cherry picked from commit 2d278488761f0b5be651a3db41e615a964123d6c)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/dp_mst: Use the correct connector while computing the link BPP limit on MST

Atm, on an MST link in DSC mode
intel_dp_compute_config_link_bpp_limits() calculates the maximum link
bpp limit using the MST root connector's DSC capabilities. That's not
correct in general: the decompression could be performed by a branch
device downstream of the root branch device or the sink itself.

Fix the above by passing to intel_dp_compute_config_link_bpp_limits()
the actual connector being modeset, containing the correct DSC
capabilities.

Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Fixes: 1c5b72daff46 ("drm/i915/dp: Set the DSC link limits in intel_dp_compute_config_link_bpp_limits")
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250509180340.554867-2-imre.deak@intel.com
(cherry picked from commit 266e2fcfe2ea0d062ea392cd22f6250ae0d11c04)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/sitronix: move tiny Sitronix drivers to their own subdir

We start to have support many Sitronix displays in the tiny directory,
and we expect more to come.

Move them to their own subdirectory.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Suggested-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250512-sitronix-v3-1-bbf6cc413698@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>

Merge tag 'amd-drm-next-6.16-2025-05-09' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.16-2025-05-09:

amdgpu:
- IPS fixes
- DSC cleanup
- DC Scaling updates
- DC FP fixes
- Fused I2C-over-AUX updates
- SubVP fixes
- Freesync fix
- DMUB AUX fixes
- VCN fix
- Hibernation fixes
- HDP fixes
- DCN 2.1 fixes
- DPIA fixes
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- Misc code cleanups
- SR-IOV updates
- RAS updates
- PSP 12 cleanups

amdkfd:
- Update error messages for SDMA
- Userptr updates

drm:
- Add drm_file_err function

dma-buf:
- Add a helper to sort and deduplicate dma_fence arrays

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250509230951.3871914-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'drm-misc-next-2025-05-08' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next

drm-misc-next for v6.16-rc1:

Cross-subsystem Changes:
- Change vsprintf %p4cn to %p4chR, remove %p4cn.

Core Changes:
- Documentation updates (fb rendering, actual_brightness)

Driver Changes:
- Small fixes to appletbdrm, panthor, st7571-i2c, rockchip, renesas,
  panic handler, gpusvm, vkms, panel timings.
- Add AUO B140QAN08.H, BOE NE140WUM-N6S, CSW MNE007QS3-8, BOE TD4320 panels.
- Convert rk3066_hdmi to bridge driver.
- Improve HPD on anx7625.
- Speed up loading tegra firmware, and other small fixes to tegra & host1x.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/5428be12-fc08-4e28-8c5f-85d73b8a7e04@linux.intel.com

Merge tag 'drm-intel-next-2025-05-08' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next

Non-display related:
- Fix undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'

Display related:
- More work towards display separation (Jani)
- Stop writing VRR_CTL_IGN_MAX_SHIFT for MTL onwards (Jouni)
- DSC checks for 3 engines (Ankit)
- Add link rate and lane count to i915_display_info (Khaled)
- PSR fixes and workaround for underrun on idle (Jouni)
- LOBF enablement and ALMP fixes (Animesh)
- Clean up VGA plane handling (Ville)
- Use an intel_connector pointer everywhere (Imre)
- Fix warning for coffeelake on SunrisePoint PCH (Jiajia)
- Rework/Correction on minimum hblank calculation (Arun)
- Dmesg clean up (Jani)
- Add a couple of simple display workarounds (Ankit, Vinod)
- Refactor HDCP GSC (Jani)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aByyL3bEufPu79OM@intel.com

Merge tag 'drm-xe-next-2025-05-08' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next

UAPI Changes:
- Expose PCIe link downgrade attributes (Raag)

Cross-subsystem Changes:

Core Changes:
- gpusvm has_dma_mapping fix (Dafna)

Driver Changes:
- Forcewake hold fix (Tejas)
- Fix guc_info debugfs for VFs (Daniele)
- Fix devcoredump chunk alignment calculation (Arnd)
- Don't print timedout job message on killed exec queues (Matt Brost)
- Don't flush the GSC worker from the reset path (Daniele)
- Use copy_from_user() instead of __copy_from_user() (Harish)
- Only flush SVM garbage collector if CONFIG_DRM_XE_GPUSVM (Shuicheng)
- Fix forcewake vs runtime pm ref release ordering (Shuicheng)
- Move xe_device_sysfs_init() to xe_device_probe() (Raag)
- Append PCIe Gen5 limitations to xe_firmware document (Raag)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/aBzUwbzCzz7Qo7fA@fedora

drm/i915/display: Indexed 8bit format does not support async flip

Async flip is not supported with Indexed 8 bit format as it depends on
LUT and can't be updated atomically.

Note: This may change the alignment for C8 framebuffers on some
platforms.

Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250407-asyn-v13-5-b93ef83076c5@intel.com

drm/i915/display: Add i915 hook for format_mod_supported_async

Hook up the newly added plane function pointer
format_mod_supported_async to populate the modifiers/formats supported
by asynchronous flips.

v5: Correct the if condition for modifier support check (Chaitanya)
v6: Replace uint32_t/uint64_t with u32/u64 (Jani)
v7: Move plannar check from intel_async_flip_check_hw() to
intel_plane_format_mod_supported_async() (Ville)
v8: In case of error print format/modifier (Chaitanya)
v9: Exclude C8 format as its not supported by hardware
v10: filter only planar formats
     move changes in can_async_flip to new patch (Ville)

Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250407-asyn-v13-4-b93ef83076c5@intel.com

drm/i915/display: Acomodate format check in intel_plane_can_async_flip()

The function intel_plane_can_async_flip() checks for async supported
modifier, add format support check also in the same function.

Note: on ADL the surface base addr is required to be 16k aligned and if
not might generate DMAR and GGTT faults leading to glitches. This patch
changes the 16k alignment to 4k for planar formats.

v11: Move filtering Indexed 8bit to a separate patch (Ville)
v12: correct the commit msg and remove unwanted debug print (Ville)

Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250407-asyn-v13-3-b93ef83076c5@intel.com

drm/plane: modify create_in_formats to acommodate async

create_in_formats creates the list of supported format/modifiers for
synchronous flips, modify the same function so as to take the
format_mod_supported as argument and create list of format/modifier for
async as well.

v5: create_in_formats can return -ve value in failure case, correct the
if condition to check the creation of blob <Chaitanya>
Dont add the modifier for which none of the formats is not supported.
v6: Remove the code for masking the unsupported modifiers as UMD can
leave with it. (Naveen/Chaitanya)
v7: Retain the unsupported modifiers, userspace should have no
impact, return pointer to blob instead of blob_id(Ville)

Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Acked-by: Xaver Hugl <xaver.hugl@kde.org>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Naveen Kumar <naveen1.kumar@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250407-asyn-v13-2-b93ef83076c5@intel.com

drm/plane: Add new plane property IN_FORMATS_ASYNC

There exists a property IN_FORMATS which exposes the plane supported
modifiers/formats to the user. In some platforms when asynchronous flip
are used all of modifiers/formats mentioned in IN_FORMATS are not
supported. This patch adds a new plane property IN_FORMATS_ASYNC to
expose the async flip supported modifiers/formats so that user can use
this information ahead and do flip with unsupported
formats/modifiers. This will save flip failures.
Add a new function pointer similar to format_mod_supported specifically
for asynchronous flip.

v2: Remove async variable from drm_plane (Ville)
v3: Add new function pointer for async (Ville)
v5: Typo corrected in commit message & some correction in the kernel
documentation. (Chaitanya)
v7: Place IN_FORMATS_ASYNC next to IN_FORMATS (Ville)
v8: replace uint32_t with u32 and uint64_t with u64 (Chaitanya)

Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Acked-by: Xaver Hugl <xaver.hugl@kde.org>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Naveen Kumar <naveen1.kumar@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250407-asyn-v13-1-b93ef83076c5@intel.com

drm/cirrus: Use non-hybrid PCI devres API

cirrus enables its PCI device with pcim_enable_device(). This,
implicitly, switches the function pci_request_regions() into managed
mode, where it becomes a devres function.

The PCI subsystem wants to remove this hybrid nature from its
interfaces. To do so, users of the aforementioned combination of
functions must be ported to non-hybrid functions.

Replace the call to sometimes-managed pci_request_regions() with one to
the always-managed pcim_request_all_regions().

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250417094009.29297-2-phasta@kernel.org

Merge tag 'drm-intel-gt-next-2025-05-08-1' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next

Driver Changes:

- Fix SLPC wait boosting reference counting to avoid getting stuck on non-boost
  frequency on power saving profile on DG1/DG2 (Vinay)
- Add 20ms delay to engine reset for robustness on HSW (Nitin)

- Use proper sleeping functions for timeouts shorter than 20ms (Andi)
- Fix fence not released on early probe errors for HuC (Janusz)

- Remove const from struct i915_wa list allocation (Kees)
- Apply SPDX license format where missing and use single-line format (Andi)
- Whitespace fixes (Dan, Andi)
- Selftest improvements (Mikolaj, Badal, Sk,

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://lore.kernel.org/r/aBxNYp0IviE23zy-@jlahtine-mobl

accel/amdxdna: Support submit commands without arguments

The latest userspace runtime allows generating commands which do not
have any argument. Remove the corresponding check in driver IOCTL to
enable this use case.

Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250507161500.2339701-1-lizhi.hou@amd.com
Link: https://lore.kernel.org/r/20250507161500.2339701-1-lizhi.hou@amd.com

drm/panel: Add Novatek NT37801 panel driver

Add driver for the Novatek NT37801 or NT37810 AMOLED DSI 1440x3200
panel in CMD mode, used on Qualcomm MTP8750 board (SM8750).

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250508-sm8750-display-panel-v2-2-3ca072e3d1fa@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250508-sm8750-display-panel-v2-2-3ca072e3d1fa@linaro.org

dt-bindings: display: panel: Add Novatek NT37801

Add bindings for the Novatek NT37801 or NT37810 AMOLED DSI panel.
Sources, like downstream DTS, schematics and hardware manuals, use two
model names (NT37801 and NT37810), so choose one and hope it is correct.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250508-sm8750-display-panel-v2-1-3ca072e3d1fa@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250508-sm8750-display-panel-v2-1-3ca072e3d1fa@linaro.org

dt-bindings: display: panel: convert truly,nt35597.txt to dt-schema

Convert the Truly NT35597 2K display panel bindings to dt-schema.

The vdispp-supply & vdispn-supply are not marked as required since
in practice they are not defined in sdm845-mtp.dts which is the
only used of these bindings.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250507-topic-misc-truly-nt35597-yaml-v1-1-bc719ad8dfff@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250507-topic-misc-truly-nt35597-yaml-v1-1-bc719ad8dfff@linaro.org

Reapply: drm/amdgpu: Use generic hdp flush function

Except HDP v5.2 all use a common logic for HDP flush. Use a generic
function. HDP v5.2 forces NO_KIQ logic, revisit it later.

Reapply after fixing up an HDP regression.

v2: merge the fix (Alex)

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/hdp7: use memcfg register to post the write for HDP flush

Reading back the remapped HDP flush register seems to cause
problems on some platforms. All we need is a read, so read back
the memcfg register.

Fixes: 689275140cb8 ("drm/amdgpu/hdp7.0: do a posting read when flushing HDP")
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lists.freedesktop.org/archives/amd-gfx/2025-April/123150.html
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4119
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3908
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/hdp6: use memcfg register to post the write for HDP flush

Reading back the remapped HDP flush register seems to cause
problems on some platforms. All we need is a read, so read back
the memcfg register.

Fixes: abe1cbaec6cf ("drm/amdgpu/hdp6.0: do a posting read when flushing HDP")
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lists.freedesktop.org/archives/amd-gfx/2025-April/123150.html
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4119
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3908
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: cleanup sriov function for psp v12

PSP v12 won't have SRIOV function.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/hdp5.2: use memcfg register to post the write for HDP flush

Reading back the remapped HDP flush register seems to cause
problems on some platforms. All we need is a read, so read back
the memcfg register.

Fixes: f756dbac1ce1 ("drm/amdgpu/hdp5.2: do a posting read when flushing HDP")
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lists.freedesktop.org/archives/amd-gfx/2025-April/123150.html
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4119
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3908
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/hdp5: use memcfg register to post the write for HDP flush

Reading back the remapped HDP flush register seems to cause
problems on some platforms. All we need is a read, so read back
the memcfg register.

Fixes: cf424020e040 ("drm/amdgpu/hdp5.0: do a posting read when flushing HDP")
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lists.freedesktop.org/archives/amd-gfx/2025-April/123150.html
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4119
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3908
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove re-route ih in psp v12

APU doesn't have second IH ring, so re-routing action here is a no-op.
It will take a lot of time to wait timeout from PSP during the
initialization. So remove the function in psp v12.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

dma-buf/sw-sync: Remove unused debug code

sync_file_debug_add() and sync_file_debug_remove() have been unused
since 2016's
commit d4cab38e153d ("staging/android: prepare sync_file for de-staging")

Remove them.

Since sync_file_debug_add was the only thing to add to
sync_file_list_head, the code that dumps it in part of
sync_info_debugfs_show can be removed, and the declaration of
the list and it's associated lock can be removed.
(The 'fences:\n...' marker in that debugfs file is left in
so as not to change the output)

That leaves the sync_print_sync_file() helper unused, and
is thus removed.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250505233838.105668-1-linux@treblig.org

drm/amd: Add per-ring reset for vcn v5.0.0 use

If there is a problem requiring a reset of the VCN engine, it is better to
reset the VCN engine rather than the entire GPU.

Add a reset callback for the ring which will stop and start VCN if an
issue happens.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250506204948.12048-4-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Add per-ring reset for vcn v4.0.0 use

If there is a problem requiring a reset of the VCN engine, it is better to
reset the VCN engine rather than the entire GPU.

Add a reset callback for the ring which will stop and start VCN if an
issue happens.

Link: https://lore.kernel.org/r/20250506204948.12048-3-mario.limonciello@amd.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Add per-ring reset for vcn v4.0.5 use

There is a problem occurring on VCN 4.0.5 where in some situations a job
is timing out.  This triggers a job timeout which then causes a GPU
reset for recovery.  That has exposed a number of issues with GPU reset
that have since been fixed. But also a GPU reset isn't actually needed
for this circumstance. Just restarting the ring is enough.

Add a reset callback for the ring which will stop and start VCN if the
issue happens.

Link: https://gitlab.freedesktop.org/mesa/mesa/-/issues/12528
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3909
Link: https://lore.kernel.org/r/20250506204948.12048-2-mario.limonciello@amd.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/hdp4: use memcfg register to post the write for HDP flush

Reading back the remapped HDP flush register seems to cause
problems on some platforms. All we need is a read, so read back
the memcfg register.

Fixes: c9b8dcabb52a ("drm/amdgpu/hdp4.0: do a posting read when flushing HDP")
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lists.freedesktop.org/archives/amd-gfx/2025-April/123150.html
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4119
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3908
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu: Use generic hdp flush function"

This reverts commit 18a878fd8aef0ec21648a3782f55a79790cd4073.

Revert this temporarily to make it easier to fix a regression
in the HDP handling.

Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm/smu13: Remove unused smu_v3 functions

smu_v13_0_display_clock_voltage_request() and
smu_v13_0_set_min_deep_sleep_dcefclk() were added in 2020 by
commit c05d1c401572 ("drm/amd/swsmu: add aldebaran smu13 ip support (v3)")
but have remained unused.

Remove them.

smu_v13_0_display_clock_voltage_request() was the only user
of smu_v13_0_set_hard_freq_limited_range().  Remove it.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm/smu11: Remove unused smu_v11_0_get_dpm_level_range

The last use of smu_v11_0_get_dpm_level_range() was removed in 2020 by
commit 46a301e14e8a ("drm/amd/powerplay: drop unnecessary Navi1x specific
APIs")

Remove it.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm/smu7: Remove unused smu7_copy_bytes_from_smc

smu7_copy_bytes_from_smc() was added in 2016 by
commit 1ff55f465103 ("drm/amd/powerplay: implement smu7_smumgr for asics
with smu ip version 7.")

but never used.

Remove it.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix the indentation

fix the indentation
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:6992 gfx_v11_ip_dump

compiler: gcc-11 (Debian 11.3.0-12) 11.3.0

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202505071619.7sHTLpNg-lkp@intel.com/
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove mdelay in psp v12

Since secure firmware is more stable than bring up phase, I believe we
don't need such mdelays any more before wait PSP response on PSP v12.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Trigger Huang <Trigger.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amd/amdkfd: Trigger segfault for early userptr unmmapping

If applications unmap the memory before destroying the userptr, it needs
trigger a segfault to notify user space to correct the free sequence in
VM debug mode.

v2: Send gpu access fault to user space
v3: Report gpu address to user space, remove unnecessary params
v4: update pr_err into one line, remove userptr log info

Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add debug bit for userptr usage

In VM debug mode, it is desirable to notify the application
to correct the freeing sequence by unmapping the memory before
destroying the userptr in the old userptr path. Add a bitmask
to decide whether to send gpu vm fault to the applition.

Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: unreserve the gem BO before returning from attach error

It requires unlocking the reserved gem BO before returning from
attaching the eviction fence error.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: promote the implicit sync to the dependent read fences

The driver doesn't want to implicitly sync on the DMA_RESV_USAGE_BOOKKEEP
usage fences, and the BOOKEEP fences should be synced explicitly. So, as
the VM implicit syncing only need to return and sync the dependent read
fences.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/psp: mark securedisplay TA as optional

This is an optional TA which is only available on
certain embedded systems.  Mark it as optional to avoid
user confusion.  This mirrors what we already do for
other optional TAs.

Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4181
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix pm notifier handling

Set the s3/s0ix and s4 flags in the pm notifier so that we can skip
the resource evictions properly in pm prepare based on whether
we are suspending or hibernating.  Drop the eviction as processes
are not frozen at this time, we we can end up getting stuck trying
to evict VRAM while applications continue to submit work which
causes the buffers to get pulled back into VRAM.

v2: Move suspend flags out of pm notifier (Mario)

Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4178
Fixes: 2965e6355dcd ("drm/amd: Add Suspend/Hibernate notification callback support")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Implement unrecoverable error message handling for VFs

This notification may arrive in VF mailbox while polling for response from
another event.

This patches covers the following scenarios:

- If VF is already in RMA state, then do not attempt to contact the host.
  Host will ignore the VF after sending the notification.

- If the notification is detected during polling, then set the RMA status,
  and return error to caller.

- If the notification arrives by interrupt, then set the RMA status and
  queue a reset.  This reset will fail and VF will stop runtime services.

Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add unrecoverable error message definitions for VFs

Host may stop runtime services after reaching a bad page threshold.

This notification will indicate to the VF that it no longer has
access to the GPU.

Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd: Stop evicting resources on APUs in suspend"

This reverts commit 3a9626c816db901def438dc2513622e281186d39.

This breaks S4 because we end up setting the s3/s0ix flags
even when we are entering s4 since prepare is used by both
flows.  The causes both the S3/s0ix and s4 flags to be set
which breaks several checks in the driver which assume they
are mutually exclusive.

Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3634
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: using separate VCN1_AON_SOC offset

VCN1_AON_SOC_ADDRESS_3_0 offset varies on different
VCN generations, the issue in vcn4.0.5 is caused by
a different VCN1_AON_SOC_ADDRESS_3_0 offset.

This patch does the following:

    1. use the same offset for other VCN generations.
    2. use the vcn4.0.5 special offset
    3. update vcn_4_0 and vcn_5_0

Acked-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix the eviction fence dereference

The dma_resv_add_fence() already refers to the added fence.
So when attaching the evciton fence to the gem bo, it needn't
refer to it anymore.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Implement Runtime Bad Page query for VFs

Host will send a notification when new bad pages are available.

Uopn guest request, the first 256 bad page addresses
will be placed into the PF2VF region.
Guest should pause the PF2VF worker thread while
the copy is in progress.

Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add Runtime Bad Page message definitions for VFs

Currently VFs rely on poison consumption interrupt from HW
to kick off the bad page retirement process. Part of this process
includes a VF reset.

This patch adds the following:

1) Host Bad Pages notification message.
2) Guest request bad pages message.

When combined, VFs are able to reserve the pages early, and potentially
avoid future poison consumption that will disrupt user services
from consequent FLR.

Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Documentation/gpu: Add new entries to amdgpu glossary

Add some additional entries.

Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add documentation to some parts of the AMDGPU ring and wb

Add some random documentation associated with the ring buffer
manipulations and writeback.

Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: change error to warning message for SDMA queues creation

SDMA doesn't support oversubsciption, it is the user matter to create
queues over HW limit, but not supposed to be a KFD error.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Don't check for NULL divisor in fixpt code

[Why]
We check for a NULL divisor but don't act on it.
This check does nothing other than throw a warning.
It does confuse static checkers though:
See https://lkml.org/lkml/2025/4/26/371

[How]
Drop the ASSERTs in both DC and SPL variants.

Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)")
Fixes: 6efc0ab3b05d ("drm/amd/display: add back quality EASF and ISHARP and dc dependency changes")
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use true/false for boolean variables in DML2 core files

Replace 0 and 1 with false and true for boolean variables in
dml2_core_dcn4_calcs.c and dml2_core_utils.c to align with the Linux
kernel coding style guidelines, which recommend using C99 bool type
with true/false values.

Signed-off-by: Ivan Shamliev <ivan.shamliev.dev@abv.bg>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: adds kernel-doc comment for dc_stream_remove_writeback()

Adds kernel-doc for externally linked dc_stream_remove_writeback function.

Signed-off-by: James Flowers <bold.zone2373@fastmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>