Linus Torvalds [Fri, 17 Oct 2025 15:16:58 +0000 (08:16 -0700)]
Merge tag 'drm-fixes-2025-10-17' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"As per usual xe/amdgpu are the leaders, with some i915 and then a
bunch of scattered fixes. There are a bunch of stability fixes for
some older amdgpu cards.
draw:
- Avoid color truncation
gpuvm:
- Avoid kernel-doc warning
sched:
- Avoid double free
i915:
- Skip GuC communication warning if reset is in progress
- Couple frontbuffer related fixes
- Deactivate PSR only on LNL and when selective fetch enabled
xe:
- Increase global invalidation timeout to handle some workloads
- Fix NPD while evicting BOs in an array of VM binds
- Fix resizable BAR to account for possibly needing to move BARs
other than the LMEMBAR
- Fix error handling in xe_migrate_init()
- Fix atomic fault handling with mixed mappings or if the page is
already in VRAM
- Enable media samplers power gating for platforms before Xe2
- Fix de-registering exec queue from GuC when unbinding
- Ensure data migration to system if indicated by madvise with SVM
- Fix kerneldoc for kunit change
- Always account for cacheline alignment on migration
- Drop bogus assertion on eviction
amdgpu:
- Backlight fix
- SI fixes
- CIK fix
- Make CE support debug only
- IP discovery fix
- Ring reset fixes
- GPUVM fault memory barrier fix
- Drop unused structures in amdgpu_drm.h
- JPEG debugfs fix
- VRAM handling fixes for GPUs without VRAM
- GC 12 MES fixes
amdkfd:
- MES fix
ast:
- Fix display output after reboot
bridge:
- lt9211: Fix version check
panthor:
- Fix MCU suspend
qaic:
- Init bootlog in correct order
- Treat remaining == 0 as error in find_and_map_user_pages()
- Lock access to DBC request queue
rockchip:
- vop2: Fix destination size in atomic check"
* tag 'drm-fixes-2025-10-17' of https://gitlab.freedesktop.org/drm/kernel: (44 commits)
drm/sched: Fix potential double free in drm_sched_job_add_resv_dependencies
drm/xe/evict: drop bogus assert
drm/xe/migrate: don't misalign current bytes
drm/xe/kunit: Fix kerneldoc for parameterized tests
drm/xe/svm: Ensure data will be migrated to system if indicated by madvise.
drm/gpuvm: Fix kernel-doc warning for drm_gpuvm_map_req.map
drm/i915/psr: Deactivate PSR only on LNL and when selective fetch enabled
drm/ast: Blank with VGACR17 sync enable, always clear VGACRB6 sync off
accel/qaic: Synchronize access to DBC request queue head & tail pointer
accel/qaic: Treat remaining == 0 as error in find_and_map_user_pages()
accel/qaic: Fix bootlog initialization ordering
drm/rockchip: vop2: use correct destination rectangle height check
drm/draw: fix color truncation in drm_draw_fill24
drm/xe/guc: Check GuC running state before deregistering exec queue
drm/xe: Enable media sampler power gating
drm/xe: Handle mixed mappings and existing VRAM on atomic faults
drm/xe/migrate: Fix an error path
drm/xe: Move rebar to be done earlier
drm/xe: Don't allow evicting of BOs in same VM in array of VM binds
drm/xe: Increase global invalidation timeout to 1000us
...
Dave Airlie [Thu, 16 Oct 2025 23:39:34 +0000 (09:39 +1000)]
Merge tag 'drm-xe-fixes-2025-10-16' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Increase global invalidation timeout to handle some workloads
(Kenneth Graunke)
- Fix NPD while evicting BOs in an array of VM binds (Matthew Brost)
- Fix resizable BAR to account for possibly needing to move BARs other
than the LMEMBAR (Lucas De Marchi)
- Fix error handling in xe_migrate_init() (Thomas Hellström)
- Fix atomic fault handling with mixed mappings or if the page is
already in VRAM (Matthew Brost)
- Enable media samplers power gating for platforms before Xe2 (Vinay
Belgaumkar)
- Fix de-registering exec queue from GuC when unbinding (Matthew Brost)
- Ensure data migration to system if indicated by madvise with SVM
(Thomas Hellström)
- Fix kerneldoc for kunit change (Matt Roper)
- Always account for cacheline alignment on migration (Matthew Auld)
- Drop bogus assertion on eviction (Matthew Auld)
Dave Airlie [Thu, 16 Oct 2025 20:57:44 +0000 (06:57 +1000)]
Merge tag 'amd-drm-fixes-6.18-2025-10-16' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.18-2025-10-16:
amdgpu:
- Backlight fix
- SI fixes
- CIK fix
- Make CE support debug only
- IP discovery fix
- Ring reset fixes
- GPUVM fault memory barrier fix
- Drop unused structures in amdgpu_drm.h
- JPEG debugfs fix
- VRAM handling fixes for GPUs without VRAM
- GC 12 MES fixes
Dave Airlie [Thu, 16 Oct 2025 20:46:14 +0000 (06:46 +1000)]
Merge tag 'drm-intel-fixes-2025-10-16' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Skip GuC communication warning if reset is in progress (Zhanjun)
- Couple frontbuffer related fixes (Ville)
- Deactivate PSR only on LNL and when selective fetch enabled (Jouni)
Takashi Iwai [Thu, 16 Oct 2025 18:14:24 +0000 (20:14 +0200)]
Merge tag 'asoc-fix-v6.18-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.18
A moderately large collection of driver specific fixes, plus a few new
quirks and device IDs. The NAU8821 changes are a little large but more
in mechanical ways than in ways that are complex.
Linus Torvalds [Thu, 16 Oct 2025 17:22:38 +0000 (10:22 -0700)]
Merge tag 'for-6.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- in tree-checker fix extref bounds check
- reorder send context structure to avoid
-Wflex-array-member-not-at-end warning
- fix extent readahead length for compressed extents
- fix memory leaks on error paths (qgroup assign ioctl, zone loading
with raid stripe tree enabled)
- fix how device specific mount options are applied, in particular the
'ssd' option will be set unexpectedly
- fix tracking of relocation state when tasks are running and
cancellation is attempted
- adjust assertion condition for folios allocated for scrub
- remove incorrect assertion checking for block group when populating
free space tree
* tag 'for-6.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: send: fix -Wflex-array-member-not-at-end warning in struct send_ctx
btrfs: tree-checker: fix bounds check in check_inode_extref()
btrfs: fix memory leaks when rejecting a non SINGLE data profile without an RST
btrfs: fix incorrect readahead expansion length
btrfs: do not assert we found block group item when creating free space tree
btrfs: do not use folio_test_partial_kmap() in ASSERT()s
btrfs: only set the device specific options after devices are opened
btrfs: fix memory leak on duplicated memory in the qgroup assign ioctl
btrfs: fix clearing of BTRFS_FS_RELOC_RUNNING if relocation already running
Linus Torvalds [Thu, 16 Oct 2025 17:16:41 +0000 (10:16 -0700)]
Merge tag 'v6.18-rc1-smb-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Fix RPC hang due to locking bug
- Fix for memory leak in read and refcount leak (in session setup)
- Minor cleanup
* tag 'v6.18-rc1-smb-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix recursive locking in RPC handle list access
smb/server: fix possible refcount leak in smb2_sess_setup()
smb/server: fix possible memory leak in smb2_read()
smb: server: Use common error handling code in smb_direct_rdma_xmit()
Linus Torvalds [Thu, 16 Oct 2025 16:41:21 +0000 (09:41 -0700)]
Merge tag 'net-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN
Current release - regressions:
- udp: do not use skb_release_head_state() before
skb_attempt_defer_free()
- gro_cells: use nested-BH locking for gro_cell
- dpll: zl3073x: increase maximum size of flash utility
Previous releases - regressions:
- core: fix lockdep splat on device unregister
- tcp: fix tcp_tso_should_defer() vs large RTT
- tls:
- don't rely on tx_work during send()
- wait for pending async decryptions if tls_strp_msg_hold fails
- can: j1939: add missing calls in NETDEV_UNREGISTER notification
handler
- eth: lan78xx: fix lost EEPROM write timeout in
lan78xx_write_raw_eeprom
Previous releases - always broken:
- ip6_tunnel: prevent perpetual tunnel growth
- dpll: zl3073x: handle missing or corrupted flash configuration
- can: m_can: fix pm_runtime and CAN state handling
- eth:
- ixgbe: fix too early devlink_free() in ixgbe_remove()
- ixgbevf: fix mailbox API compatibility
- gve: Check valid ts bit on RX descriptor before hw timestamping
- idpf: cleanup remaining SKBs in PTP flows
- r8169: fix packet truncation after S4 resume on RTL8168H/RTL8111H"
* tag 'net-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
udp: do not use skb_release_head_state() before skb_attempt_defer_free()
net: usb: lan78xx: fix use of improperly initialized dev->chipid in lan78xx_reset
netdevsim: set the carrier when the device goes up
selftests: tls: add test for short splice due to full skmsg
selftests: net: tls: add tests for cmsg vs MSG_MORE
tls: don't rely on tx_work during send()
tls: wait for pending async decryptions if tls_strp_msg_hold fails
tls: always set record_type in tls_process_cmsg
tls: wait for async encrypt in case of error during latter iterations of sendmsg
tls: trim encrypted message to match the plaintext on short splice
tg3: prevent use of uninitialized remote_adv and local_adv variables
MAINTAINERS: new entry for IPv6 IOAM
gve: Check valid ts bit on RX descriptor before hw timestamping
net: core: fix lockdep splat on device unregister
MAINTAINERS: add myself as maintainer for b53
selftests: net: check jq command is supported
net: airoha: Take into account out-of-order tx completions in airoha_dev_xmit()
tcp: fix tcp_tso_should_defer() vs large RTT
r8152: add error handling in rtl8152_driver_init
usbnet: Fix using smp_processor_id() in preemptible code warnings
...
Linus Torvalds [Thu, 16 Oct 2025 16:39:29 +0000 (09:39 -0700)]
Merge tag 'ata-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- Do not print an error message (and assume that the General Purpose
Log Directory log page is not supported) for a device that reports a
bogus General Purpose Logging Version.
Unsurprisingly, many vendors fail to report the only valid General
Purpose Logging Version (Damien)
* tag 'ata-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: relax checks in ata_read_log_directory()
Eric Dumazet [Wed, 15 Oct 2025 05:27:15 +0000 (05:27 +0000)]
udp: do not use skb_release_head_state() before skb_attempt_defer_free()
Michal reported and bisected an issue after recent adoption
of skb_attempt_defer_free() in UDP.
The issue here is that skb_release_head_state() is called twice per skb,
one time from skb_consume_udp(), then a second time from skb_defer_free_flush()
and napi_consume_skb().
As Sabrina suggested, remove skb_release_head_state() call from
skb_consume_udp().
Add a DEBUG_NET_WARN_ON_ONCE(skb_nfct(skb)) in skb_attempt_defer_free()
Many thanks to Michal, Sabrina, Paolo and Florian for their help.
Fixes: 6471658dc66c ("udp: use skb_attempt_defer_free()") Reported-and-bisected-by: Michal Kubecek <mkubecek@suse.cz> Closes: https://lore.kernel.org/netdev/gpjh4lrotyephiqpuldtxxizrsg6job7cvhiqrw72saz2ubs3h@g6fgbvexgl3r/ Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Michal Kubecek <mkubecek@suse.cz> Cc: Sabrina Dubroca <sd@queasysnail.net> Cc: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://patch.msgid.link/20251015052715.4140493-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tvrtko Ursulin [Wed, 15 Oct 2025 08:40:15 +0000 (09:40 +0100)]
drm/sched: Fix potential double free in drm_sched_job_add_resv_dependencies
When adding dependencies with drm_sched_job_add_dependency(), that
function consumes the fence reference both on success and failure, so in
the latter case the dma_fence_put() on the error path (xarray failed to
expand) is a double free.
Interestingly this bug appears to have been present ever since
commit ebd5f74255b9 ("drm/sched: Add dependency tracking"), since the code
back then looked like this:
drm_sched_job_add_implicit_dependencies():
...
for (i = 0; i < fence_count; i++) {
ret = drm_sched_job_add_dependency(job, fences[i]);
if (ret)
break;
}
for (; i < fence_count; i++)
dma_fence_put(fences[i]);
Which means for the failing 'i' the dma_fence_put was already a double
free. Possibly there were no users at that time, or the test cases were
insufficient to hit it.
The bug was then only noticed and fixed after
commit 9c2ba265352a ("drm/scheduler: use new iterator in drm_sched_job_add_implicit_dependencies v2")
landed, with its fixup of
commit 4eaf02d6076c ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies").
At that point it was a slightly different flavour of a double free, which
commit 963d0b356935 ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder")
noticed and attempted to fix.
But it only moved the double free from happening inside the
drm_sched_job_add_dependency(), when releasing the reference not yet
obtained, to the caller, when releasing the reference already released by
the former in the failure case.
As such it is not easy to identify the right target for the fixes tag so
lets keep it simple and just continue the chain.
While fixing we also improve the comment and explain the reason for taking
the reference and not dropping it.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Fixes: 963d0b356935 ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/dri-devel/aNFbXq8OeYl3QSdm@stanley.mountain/ Cc: Christian König <christian.koenig@amd.com> Cc: Rob Clark <robdclark@chromium.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Philipp Stanner <phasta@kernel.org> Cc: Christian König <ckoenig.leichtzumerken@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: stable@vger.kernel.org # v5.16+ Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://lore.kernel.org/r/20251015084015.6273-1-tvrtko.ursulin@igalia.com
Mark Brown [Thu, 16 Oct 2025 11:41:35 +0000 (12:41 +0100)]
ASoC: nau8821: Fix IRQ handling and improve jack
Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:
This patch series addresses a set of issues in the Nuvoton NAU88L21
audio codec driver related to interrupt handling and jack hotplug
detection reliability.
The changes focus on:
* Eliminating race conditions between jack insertion and ejection events
* Ensuring interrupts are consistently and correctly cleared before
unmasking
* Introducing a DMI-based quirk to bypass the jack debounce circuit on
Valve Steam Deck, improving detection accuracy under stress
* Improving robustness of the IRQ handler by avoiding unnecessary
blocking operations
The series has been tested on affected hardware to verify correct
behavior during repeated and rapid jack hotplug cycles.
Mark Brown [Thu, 16 Oct 2025 11:41:30 +0000 (12:41 +0100)]
ASoC: Add QCS615 sound card support
Merge series from Le Qi <le.qi@oss.qualcomm.com>:
This patch series adds support for the QCS615 sound card:
- Updates device tree bindings for SM8250 to include QCS615.
- Adds QCS615 support in the SC8280XP ASoC driver.
Pauli Virtanen [Wed, 15 Oct 2025 19:47:10 +0000 (22:47 +0300)]
ALSA: usb-audio: add volume quirks for MS LifeChat LX-3000
ID 045e:070f Microsoft Corp. LifeChat LX-3000 Headset
has muted minimum Speaker Playback Volume, and 4 amixer steps were
observed to produce 1 actual volume step.
Apply min_mute quirk and correct res=48 -> 4*48.
Tested with the device.
Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Matthew Auld [Fri, 10 Oct 2025 15:24:58 +0000 (16:24 +0100)]
drm/xe/evict: drop bogus assert
This assert can trigger here with non pin_map users that select
LATE_RESTORE, since the vmap is allowed to be NULL given that
save/restore can now use the blitter instead. The check here doesn't
seem to have much value anymore given that we no longer move pinned
memory, so any existing vmap is left well alone, and doesn't need to be
recreated upon restore, so just drop the assert here.
Fixes: 86f69c26113c ("drm/xe: use backup object for pinned save/restore") Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6213 Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://lore.kernel.org/r/20251010152457.177884-2-matthew.auld@intel.com
(cherry picked from commit a10b4a69c7f8f596d2c5218fbe84430734fab3b2) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Matthew Auld [Fri, 10 Oct 2025 16:20:21 +0000 (17:20 +0100)]
drm/xe/migrate: don't misalign current bytes
If current bytes exceeds the max copy size, ensure the clamped size
still accounts for the XE_CACHELINE_BYTES alignment, otherwise we
trigger the assert in xe_migrate_vram with the size now being out of
alignment.
Matt Roper [Mon, 13 Oct 2025 15:30:15 +0000 (08:30 -0700)]
drm/xe/kunit: Fix kerneldoc for parameterized tests
Kunit's generate_params() was recently updated to take an additional
test context parameter. Xe's IP and platform parameter generators were
updated accordingly at the same time, but the new parameter was not
added to the functions' kerneldoc, resulting in the following warnings:
Warning: drivers/gpu/drm/xe/tests/xe_pci.c:78 function parameter 'test' not described in 'xe_pci_fake_data_gen_params'
Warning: drivers/gpu/drm/xe/tests/xe_pci.c:254 function parameter 'test' not described in 'xe_pci_graphics_ip_gen_param'
Warning: drivers/gpu/drm/xe/tests/xe_pci.c:278 function parameter 'test' not described in 'xe_pci_media_ip_gen_param'
Warning: drivers/gpu/drm/xe/tests/xe_pci.c:302 function parameter 'test' not described in 'xe_pci_id_gen_param'
Warning: drivers/gpu/drm/xe/tests/xe_pci.c:390 function parameter 'test' not described in 'xe_pci_live_device_gen_param'
5 warnings as errors
Document the new parameter to eliminate the warnings and make CI happy.
Thomas Hellström [Fri, 10 Oct 2025 10:41:48 +0000 (12:41 +0200)]
drm/xe/svm: Ensure data will be migrated to system if indicated by madvise.
If the location madvise() is set to
DRM_XE_PREFERRED_LOC_DEFAULT_SYSTEM, the drm_pagemap in the
SVM gpu fault handler will be set to NULL. However there is nothing
that explicitly migrates the data to system if it is already present
in device memory.
In that case, set the device memory owner to NULL to ensure
data gets properly migrated to system on page-fault.
I Viswanath [Mon, 13 Oct 2025 18:16:48 +0000 (23:46 +0530)]
net: usb: lan78xx: fix use of improperly initialized dev->chipid in lan78xx_reset
dev->chipid is used in lan78xx_init_mac_address before it's initialized:
lan78xx_reset() {
lan78xx_init_mac_address()
lan78xx_read_eeprom()
lan78xx_read_raw_eeprom() <- dev->chipid is used here
dev->chipid = ... <- dev->chipid is initialized correctly here
}
Reorder initialization so that dev->chipid is set before calling
lan78xx_init_mac_address().
Fixes: a0db7d10b76e ("lan78xx: Add to handle mux control per chip id") Signed-off-by: I Viswanath <viswanathiyyappan@gmail.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Khalid Aziz <khalid@kernel.org> Link: https://patch.msgid.link/20251013181648.35153-1-viswanathiyyappan@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 16 Oct 2025 00:56:20 +0000 (17:56 -0700)]
Merge tag 'linux-can-fixes-for-6.18-20251014' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-10-14
The first 2 paches are by Celeste Liu and target the gS_usb driver.
The first patch remove the limitation to 3 CAN interface per USB
device. The second patch adds the missing population of
net_device->dev_port.
The next 4 patches are by me and fix the m_can driver. They add a
missing pm_runtime_disable(), fix the CAN state transition back to
Error Active and fix the state after ifup and suspend/resume.
Another patch by me targets the m_can driver, too and replaces Dong
Aisheng's old email address.
The next 2 patches are by Vincent Mailhol and update the CAN
networking Documentation.
Tetsuo Handa contributes the last patch that add missing cleanup calls
in the NETDEV_UNREGISTER notification handler.
* tag 'linux-can-fixes-for-6.18-20251014' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: j1939: add missing calls in NETDEV_UNREGISTER notification handler
can: add Transmitter Delay Compensation (TDC) documentation
can: remove false statement about 1:1 mapping between DLC and length
can: m_can: replace Dong Aisheng's old email address
can: m_can: fix CAN state in system PM
can: m_can: m_can_chip_config(): bring up interface in correct state
can: m_can: m_can_handle_state_errors(): fix CAN state transition to Error Active
can: m_can: m_can_plat_remove(): add missing pm_runtime_disable()
can: gs_usb: gs_make_candev(): populate net_device->dev_port
can: gs_usb: increase max interface to U8_MAX
====================
Breno Leitao [Tue, 14 Oct 2025 09:17:25 +0000 (02:17 -0700)]
netdevsim: set the carrier when the device goes up
Bringing a linked netdevsim device down and then up causes communication
failure because both interfaces lack carrier. Basically a ifdown/ifup on
the interface make the link broken.
Commit 3762ec05a9fbda ("netdevsim: add NAPI support") added supported
for NAPI, calling netif_carrier_off() in nsim_stop(). This patch
re-enables the carrier symmetrically on nsim_open(), in case the device
is linked and the peer is up.
Jakub Kicinski [Thu, 16 Oct 2025 00:41:47 +0000 (17:41 -0700)]
Merge branch 'tls-misc-bugfixes'
Sabrina Dubroca says:
====================
tls: misc bugfixes
Jann Horn reported multiple bugs in kTLS. This series addresses them,
and adds some corresponding selftests for those that are reproducible
(and without failure injection).
====================
Sabrina Dubroca [Tue, 14 Oct 2025 09:17:01 +0000 (11:17 +0200)]
selftests: net: tls: add tests for cmsg vs MSG_MORE
We don't have a test to check that MSG_MORE won't let us merge records
of different types across sendmsg calls.
Add new tests that check:
- MSG_MORE is only allowed for DATA records
- a pending DATA record gets closed and pushed before a non-DATA
record is processed
Sabrina Dubroca [Tue, 14 Oct 2025 09:17:00 +0000 (11:17 +0200)]
tls: don't rely on tx_work during send()
With async crypto, we rely on tx_work to actually transmit records
once encryption completes. But while send() is running, both the
tx_lock and socket lock are held, so tx_work_handler cannot process
the queue of encrypted records, and simply reschedules itself. During
a large send(), this could last a long time, and use a lot of memory.
Transmit any pending encrypted records before restarting the main
loop of tls_sw_sendmsg_locked.
Sabrina Dubroca [Tue, 14 Oct 2025 09:16:59 +0000 (11:16 +0200)]
tls: wait for pending async decryptions if tls_strp_msg_hold fails
Async decryption calls tls_strp_msg_hold to create a clone of the
input skb to hold references to the memory it uses. If we fail to
allocate that clone, proceeding with async decryption can lead to
various issues (UAF on the skb, writing into userspace memory after
the recv() call has returned).
In this case, wait for all pending decryption requests.
Sabrina Dubroca [Tue, 14 Oct 2025 09:16:58 +0000 (11:16 +0200)]
tls: always set record_type in tls_process_cmsg
When userspace wants to send a non-DATA record (via the
TLS_SET_RECORD_TYPE cmsg), we need to send any pending data from a
previous MSG_MORE send() as a separate DATA record. If that DATA record
is encrypted asynchronously, tls_handle_open_record will return
-EINPROGRESS. This is currently treated as an error by
tls_process_cmsg, and it will skip setting record_type to the correct
value, but the caller (tls_sw_sendmsg_locked) handles that return
value correctly and proceeds with sending the new message with an
incorrect record_type (DATA instead of whatever was requested in the
cmsg).
Always set record_type before handling the open record. If
tls_handle_open_record returns an error, record_type will be
ignored. If it succeeds, whether with synchronous crypto (returning 0)
or asynchronous (returning -EINPROGRESS), the caller will proceed
correctly.
Sabrina Dubroca [Tue, 14 Oct 2025 09:16:57 +0000 (11:16 +0200)]
tls: wait for async encrypt in case of error during latter iterations of sendmsg
If we hit an error during the main loop of tls_sw_sendmsg_locked (eg
failed allocation), we jump to send_end and immediately
return. Previous iterations may have queued async encryption requests
that are still pending. We should wait for those before returning, as
we could otherwise be reading from memory that userspace believes
we're not using anymore, which would be a sort of use-after-free.
This is similar to what tls_sw_recvmsg already does: failures during
the main loop jump to the "wait for async" code, not straight to the
unlock/return.
Sabrina Dubroca [Tue, 14 Oct 2025 09:16:56 +0000 (11:16 +0200)]
tls: trim encrypted message to match the plaintext on short splice
During tls_sw_sendmsg_locked, we pre-allocate the encrypted message
for the size we're expecting to send during the current iteration, but
we may end up sending less, for example when splicing: if we're
getting the data from small fragments of memory, we may fill up all
the slots in the skmsg with less data than expected.
In this case, we need to trim the encrypted message to only the length
we actually need, to avoid pushing uninitialized bytes down the
underlying TCP socket.
Justin Iurman [Tue, 14 Oct 2025 17:06:50 +0000 (19:06 +0200)]
MAINTAINERS: new entry for IPv6 IOAM
Create a maintainer entry for IPv6 IOAM. Add myself as I authored most
if not all of the IPv6 IOAM code in the kernel and actively participate
in the related IETF groups.
Li Qiang [Wed, 15 Oct 2025 07:55:30 +0000 (15:55 +0800)]
ASoC: amd/sdw_utils: avoid NULL deref when devm_kasprintf() fails
devm_kasprintf() may return NULL on memory allocation failure,
but the debug message prints cpus->dai_name before checking it.
Move the dev_dbg() call after the NULL check to prevent potential
NULL pointer dereference.
The widgets DMIC3_ENA and DMIC4_ENA must be defined in the DAPM
suppy widget, just like DMICL_ENA and DMICR_ENA. Whenever they
are turned on or off, the required startup or shutdown sequences
must be taken care by the max98090_shdn_event.
Add compatible string fsl,imx-audio-tlv320 to fix below CHECK_DTBS warning:
arch/arm/boot/dts/nxp/imx/imx6dl-gw5903.dtb: /sound: failed to match any schema with compatible: ['fsl,imx-audio-tlv320']
Tim Hostetler [Tue, 14 Oct 2025 00:47:39 +0000 (00:47 +0000)]
gve: Check valid ts bit on RX descriptor before hw timestamping
The device returns a valid bit in the LSB of the low timestamp byte in
the completion descriptor that the driver should check before
setting the SKB's hardware timestamp. If the timestamp is not valid, do not
hardware timestamp the SKB.
Cc: stable@vger.kernel.org Fixes: b2c7aeb49056 ("gve: Implement ndo_hwtstamp_get/set for RX timestamping") Reviewed-by: Joshua Washington <joshwash@google.com> Signed-off-by: Tim Hostetler <thostet@google.com> Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20251014004740.2775957-1-hramamurthy@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 15 Oct 2025 14:57:28 +0000 (07:57 -0700)]
Remove long-stale ext3 defconfig option
Inspired by commit c065b6046b34 ("Use CONFIG_EXT4_FS instead of
CONFIG_EXT3_FS in all of the defconfigs") I looked around for any other
left-over EXT3 config options, and found some old defconfig files still
mentioned CONFIG_EXT3_DEFAULTS_TO_ORDERED.
That config option was removed a decade ago in commit c290ea01abb7 ("fs:
Remove ext3 filesystem driver"). It had a good run, but let's remove it
for good.
Linus Torvalds [Wed, 15 Oct 2025 14:51:57 +0000 (07:51 -0700)]
Merge tag 'ext4_for_linus-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bug fixes from Ted Ts'o:
- Fix regression caused by removing CONFIG_EXT3_FS when testing some
very old defconfigs
- Avoid a BUG_ON when opening a file on a maliciously corrupted file
system
- Avoid mm warnings when freeing a very large orphan file metadata
- Avoid a theoretical races between metadata writeback and checkpoints
(it's very hard to hit in practice, since the race requires that the
writeback take a very long time)
* tag 'ext4_for_linus-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
Use CONFIG_EXT4_FS instead of CONFIG_EXT3_FS in all of the defconfigs
ext4: free orphan info with kvfree
ext4: detect invalid INLINE_DATA + EXTENTS flag combination
ext4, doc: fix and improve directory hash tree description
ext4: wait for ongoing I/O to complete before freeing blocks
jbd2: ensure that all ongoing I/O complete before freeing blocks
Nicolas Frattaroli [Mon, 13 Oct 2025 07:34:04 +0000 (09:34 +0200)]
PM / devfreq: rockchip-dfi: switch to FIELD_PREP_WM16 macro
The era of hand-rolled HIWORD_UPDATE macros is over, at least for those
drivers that use constant masks.
Like many other Rockchip drivers, rockchip-dfi brings with it its own
HIWORD_UPDATE macro. This variant doesn't shift the value (and like the
others, doesn't do any checking).
Remove it, and replace instances of it with hw_bitfield.h's
FIELD_PREP_WM16. Since FIELD_PREP_WM16 requires contiguous masks and
shifts the value for us, some reshuffling of definitions needs to
happen.
This gives us better compile-time error checking, and in my opinion,
nicer code.
Tested on an RK3568 ODROID-M1 board (LPDDR4X at 1560 MHz, an RK3588
Radxa ROCK 5B board (LPDDR4X at 2112 MHz) and an RK3588 Radxa ROCK 5T
board (LPDDR5 at 2400 MHz). perf measurements were consistent with the
measurements of stress-ng --stream in all cases.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com> Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
drm/i915/psr: Deactivate PSR only on LNL and when selective fetch enabled
Using intel_psr_exit in frontbuffer flush on older platforms seems to be
causing problems.
Sending single full frame update using intel_psr_force_update is anyways
more optimal compared to psr deactivate/activate -> move back to this
approach on PSR1, PSR HW tracking and Panel Replay full frame update and
use deactivate/activate only on LunarLake and only when selective fetch is
enabled.
Tested-by: Lemen <lemen@lemen.xyz> Tested-by: Koos Vriezen <koos.vriezen@gmail.com> Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14946 Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Link: https://lore.kernel.org/r/20250922102725.2752742-1-jouni.hogander@intel.com
(cherry picked from commit 924adb0bbdd8fef25fd229c76e3f602c3e8752ee) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Kernel side:
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/0:0 state:D stack:0 pid:5021 tgid:5021 ppid:2 flags:0x00200000
Workqueue: ksmbd-io handle_ksmbd_work
Call trace:
__schedule from schedule+0x3c/0x58
schedule from schedule_preempt_disabled+0xc/0x10
schedule_preempt_disabled from rwsem_down_read_slowpath+0x1b0/0x1d8
rwsem_down_read_slowpath from down_read+0x28/0x30
down_read from ksmbd_session_rpc_method+0x18/0x3c
ksmbd_session_rpc_method from ksmbd_rpc_open+0x34/0x68
ksmbd_rpc_open from ksmbd_session_rpc_open+0x194/0x228
ksmbd_session_rpc_open from create_smb2_pipe+0x8c/0x2c8
create_smb2_pipe from smb2_open+0x10c/0x27ac
smb2_open from handle_ksmbd_work+0x238/0x3dc
handle_ksmbd_work from process_scheduled_works+0x160/0x25c
process_scheduled_works from worker_thread+0x16c/0x1e8
worker_thread from kthread+0xa8/0xb8
kthread from ret_from_fork+0x14/0x38
Exception stack(0x8529ffb0 to 0x8529fff8)
The task deadlocks because the lock is already held:
ksmbd_session_rpc_open
down_write(&sess->rpc_lock)
ksmbd_rpc_open
ksmbd_session_rpc_method
down_read(&sess->rpc_lock) <-- deadlock
Adjust ksmbd_session_rpc_method() callers to take the lock when necessary.
Fixes: 305853cce3794 ("ksmbd: Fix race condition in RPC handle list access") Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Component bind callbacks already does runtime pm calls, soundwire codec
also tries to do the exactly same thing resulting in Unbalanced
pm_runtime_enable and disable calls.
Remove the redundant calls from wcd938x-sdw driver.
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Fixes: ebaf88c0546d ("ASoC: codecs: wcd-common: move component ops to common") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Link: https://patch.msgid.link/20251008145801.3479-1-srinivas.kandagatla@oss.qualcomm.com Signed-off-by: Mark Brown <broonie@kernel.org>
Jiaming Zhang [Wed, 15 Oct 2025 05:16:45 +0000 (13:16 +0800)]
ALSA: usb-audio: Fix NULL pointer deference in try_to_register_card
In try_to_register_card(), the return value of usb_ifnum_to_if() is
passed directly to usb_interface_claimed() without a NULL check, which
will lead to a NULL pointer dereference when creating an invalid
USB audio device. Fix this by adding a check to ensure the interface
pointer is valid before passing it to usb_interface_claimed().
Fixes: 39efc9c8a973 ("ALSA: usb-audio: Fix last interface check for registration") Closes: https://lore.kernel.org/all/CANypQFYtQxHL5ghREs-BujZG413RPJGnO5TH=xjFBKpPts33tA@mail.gmail.com/ Signed-off-by: Jiaming Zhang <r772577952@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Thomas Zimmermann [Tue, 14 Oct 2025 08:46:34 +0000 (10:46 +0200)]
drm/ast: Blank with VGACR17 sync enable, always clear VGACRB6 sync off
Blank the display by disabling sync pulses with VGACR17<7>. Unblank
by reenabling them. This VGA setting should be supported by all Aspeed
hardware.
Ast currently blanks via sync-off bits in VGACRB6. Not all BMCs handle
VGACRB6 correctly. After disabling sync during a reboot, some BMCs do
not reenable it after the soft reset. The display output remains dark.
When the display is off during boot, some BMCs set the sync-off bits in
VGACRB6, so the display remains dark. Observed with Blackbird AST2500
BMCs. Clearing the sync-off bits unconditionally fixes these issues.
Also do not modify VGASR1's SD bit for blanking, as it only disables GPU
access to video memory.
v2:
- init vgacrb6 correctly (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: ce3d99c83495 ("drm: Call drm_atomic_helper_shutdown() at shutdown time for misc drivers") Tested-by: Nick Bowler <nbowler@draconx.ca> Reported-by: Nick Bowler <nbowler@draconx.ca> Closes: https://lore.kernel.org/dri-devel/wpwd7rit6t4mnu6kdqbtsnk5bhftgslio6e2jgkz6kgw6cuvvr@xbfswsczfqsi/ Cc: Douglas Anderson <dianders@chromium.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v6.7+ Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://lore.kernel.org/r/20251014084743.18242-1-tzimmermann@suse.de
Florian Westphal [Mon, 13 Oct 2025 18:50:52 +0000 (20:50 +0200)]
net: core: fix lockdep splat on device unregister
Since blamed commit, unregister_netdevice_many_notify() takes the netdev
mutex if the device needs it.
If the device list is too long, this will lock more device mutexes than
lockdep can handle:
unshare -n \
bash -c 'for i in $(seq 1 100);do ip link add foo$i type dummy;done'
BUG: MAX_LOCK_DEPTH too low!
turning off the locking correctness validator.
depth: 48 max: 48!
48 locks held by kworker/u16:1/69:
#0: ..148 ((wq_completion)netns){+.+.}-{0:0}, at: process_one_work
#1: ..d40 (net_cleanup_work){+.+.}-{0:0}, at: process_one_work
#2: ..bd0 (pernet_ops_rwsem){++++}-{4:4}, at: cleanup_net
#3: ..aa8 (rtnl_mutex){+.+.}-{4:4}, at: default_device_exit_batch
#4: ..cb0 (&dev_instance_lock_key#3){+.+.}-{4:4}, at: unregister_netdevice_many_notify
[..]
Add a helper to close and then unlock a list of net_devices.
Devices that are not up have to be skipped - netif_close_many always
removes them from the list without any other actions taken, so they'd
remain in locked state.
Close devices whenever we've used up half of the tracking slots or we
processed entire list without hitting the limit.
Fixes: 7e4d784f5810 ("net: hold netdev instance lock during rtnetlink operations") Signed-off-by: Florian Westphal <fw@strlen.de> Link: https://patch.msgid.link/20251013185052.14021-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Tue, 14 Oct 2025 16:15:45 +0000 (09:15 -0700)]
Merge tag 'for-linus-6.18-2' of https://github.com/cminyard/linux-ipmi
Pull IPMI fixes from Corey Minyard:
"A few bug fixes for patches that went in this release: a refcount
error and some missing or incorrect error checks"
* tag 'for-linus-6.18-2' of https://github.com/cminyard/linux-ipmi:
ipmi: Fix handling of messages with provided receive message pointer
mfd: ls2kbmc: check for devm_mfd_add_devices() failure
mfd: ls2kbmc: Fix an IS_ERR() vs NULL check in probe()
accel/qaic: Synchronize access to DBC request queue head & tail pointer
Two threads of the same process can potential read and write parallelly to
head and tail pointers of the same DBC request queue. This could lead to a
race condition and corrupt the DBC request queue.
Fixes: ff13be830333 ("accel/qaic: Add datapath") Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com> Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
[jhugo: Add fixes tag] Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251007061837.206132-1-youssef.abdulrahman@oss.qualcomm.com
Youssef Samir [Tue, 7 Oct 2025 12:23:20 +0000 (14:23 +0200)]
accel/qaic: Treat remaining == 0 as error in find_and_map_user_pages()
Currently, if find_and_map_user_pages() takes a DMA xfer request from the
user with a length field set to 0, or in a rare case, the host receives
QAIC_TRANS_DMA_XFER_CONT from the device where resources->xferred_dma_size
is equal to the requested transaction size, the function will return 0
before allocating an sgt or setting the fields of the dma_xfer struct.
In that case, encode_addr_size_pairs() will try to access the sgt which
will lead to a general protection fault.
Return an EINVAL in case the user provides a zero-sized ALP, or the device
requests continuation after all of the bytes have been transferred.
Fixes: 96d3c1cadedb ("accel/qaic: Clean up integer overflow checking in map_user_pages()") Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com> Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com> Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com> Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251007122320.339654-1-youssef.abdulrahman@oss.qualcomm.com
Jeffrey Hugo [Tue, 7 Oct 2025 11:57:50 +0000 (13:57 +0200)]
accel/qaic: Fix bootlog initialization ordering
As soon as we queue MHI buffers to receive the bootlog from the device,
we could be receiving data. Therefore all the resources needed to
process that data need to be setup prior to queuing the buffers.
We currently initialize some of the resources after queuing the buffers
which creates a race between the probe() and any data that comes back
from the device. If the uninitialized resources are accessed, we could
see page faults.
Fix the init ordering to close the race.
Fixes: 5f8df5c6def6 ("accel/qaic: Add bootlog debugfs") Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com> Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com> Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251007115750.332169-1-youssef.abdulrahman@oss.qualcomm.com
Fix spelling of CIP_NO_HEADER to prevent a kernel-doc warning.
Warning: amdtp-stream.h:57 Enum value 'CIP_NO_HEADER' not described in enum 'cip_flags'
Warning: amdtp-stream.h:57 Excess enum value '%CIP_NO_HEADERS' description in 'cip_flags'
Wang Liang [Mon, 13 Oct 2025 08:00:39 +0000 (16:00 +0800)]
selftests: net: check jq command is supported
The jq command is used in vlan_bridge_binding.sh, if it is not supported,
the test will spam the following log.
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# TEST: Test bridge_binding on->off when lower down [FAIL]
# Got operstate of , expected 0
The rtnetlink.sh has the same problem. It makes sense to check if jq is
installed before running these tests. After this patch, the
vlan_bridge_binding.sh skipped if jq is not supported:
# timeout set to 3600
# selftests: net: vlan_bridge_binding.sh
# TEST: jq not installed [SKIP]
Fixes: dca12e9ab760 ("selftests: net: Add a VLAN bridge binding selftest") Fixes: 6a414fd77f61 ("selftests: rtnetlink: Add an address proto test") Signed-off-by: Wang Liang <wangliang74@huawei.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20251013080039.3035898-1-wangliang74@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Hans de Goede [Wed, 1 Oct 2025 21:23:10 +0000 (23:23 +0200)]
i2c: usbio: Add ACPI device-id for MTL-CVF devices
Add "INTC10D2" ACPI device-id for MTL-CVF devices, like the Dell Latitude
7450.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2368506 Signed-off-by: Hans de Goede <hansg@kernel.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Israel Cepeda <israel.a.cepeda.lopez@intel.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Lorenzo Bianconi [Sun, 12 Oct 2025 09:19:44 +0000 (11:19 +0200)]
net: airoha: Take into account out-of-order tx completions in airoha_dev_xmit()
Completion napi can free out-of-order tx descriptors if hw QoS is
enabled and packets with different priority are queued to same DMA ring.
Take into account possible out-of-order reports checking if the tx queue
is full using circular buffer head/tail pointer instead of the number of
queued packets.
Fixes: 23020f0493270 ("net: airoha: Introduce ethernet support for EN7581 SoC") Suggested-by: Simon Horman <horms@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251012-airoha-tx-busy-queue-v2-1-a600b08bab2d@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Eric Dumazet [Sat, 11 Oct 2025 11:57:42 +0000 (11:57 +0000)]
tcp: fix tcp_tso_should_defer() vs large RTT
Neal reported that using neper tcp_stream with TCP_TX_DELAY
set to 50ms would often lead to flows stuck in a small cwnd mode,
regardless of the congestion control.
While tcp_stream sets TCP_TX_DELAY too late after the connect(),
it highlighted two kernel bugs.
The following heuristic in tcp_tso_should_defer() seems wrong
for large RTT:
delta = tp->tcp_clock_cache - head->tstamp;
/* If next ACK is likely to come too late (half srtt), do not defer */
if ((s64)(delta - (u64)NSEC_PER_USEC * (tp->srtt_us >> 4)) < 0)
goto send_now;
If next ACK is expected to come in more than 1 ms, we should
not defer because we prefer a smooth ACK clocking.
While blamed commit was a step in the good direction, it was not
generic enough.
Another patch fixing TCP_TX_DELAY for established flows
will be proposed when net-next reopens.
For historical and portability reasons, the netif_rx() is usually
run in the softirq or interrupt context, this commit therefore add
local_bh_disable/enable() protection in the usbnet_resume_rx().
Alok Tiwari [Sun, 12 Oct 2025 14:20:01 +0000 (07:20 -0700)]
drm/rockchip: vop2: use correct destination rectangle height check
The vop2_plane_atomic_check() function incorrectly checks
drm_rect_width(dest) twice instead of verifying both width and height.
Fix the second condition to use drm_rect_height(dest) so that invalid
destination rectangles with height < 4 are correctly rejected.
Raju Rangoju [Fri, 10 Oct 2025 06:51:42 +0000 (12:21 +0530)]
amd-xgbe: Avoid spurious link down messages during interface toggle
During interface toggle operations (ifdown/ifup), the driver currently
resets the local helper variable 'phy_link' to -1. This causes the link
state machine to incorrectly interpret the state as a link change event,
resulting in spurious "Link is down" messages being logged when the
interface is brought back up.
Preserve the phy_link state across interface toggles to avoid treating
the -1 sentinel value as a legitimate link state transition.
Fixes: 88131a812b16 ("amd-xgbe: Perform phy connect/disconnect at dev open/stop") Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Link: https://patch.msgid.link/20251010065142.1189310-1-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Francesco Valla [Fri, 3 Oct 2025 10:33:03 +0000 (12:33 +0200)]
drm/draw: fix color truncation in drm_draw_fill24
The color parameter passed to drm_draw_fill24() was truncated to 16
bits, leading to an incorrect color drawn to the target iosys_map.
Fix this behavior, widening the parameter to 32 bits.
Theodore Ts'o [Tue, 14 Oct 2025 01:50:40 +0000 (21:50 -0400)]
Use CONFIG_EXT4_FS instead of CONFIG_EXT3_FS in all of the defconfigs
Commit d6ace46c82fd ("ext4: remove obsolete EXT3 config options")
removed the obsolete EXT3_CONFIG options, since it had been over a
decade since fs/ext3 had been removed. Unfortunately, there were a
number of defconfigs that still used CONFIG_EXT3_FS which the cleanup
commit didn't fix up. This led to a large number of defconfig test
builds to fail. Oops.
Marek Vasut [Sat, 11 Oct 2025 11:02:49 +0000 (13:02 +0200)]
net: phy: realtek: Avoid PHYCR2 access if PHYCR2 not present
The driver is currently checking for PHYCR2 register presence in
rtl8211f_config_init(), but it does so after accessing PHYCR2 to
disable EEE. This was introduced in commit bfc17c165835 ("net:
phy: realtek: disable PHY-mode EEE"). Move the PHYCR2 presence
test before the EEE disablement and simplify the code.
Fixes: bfc17c165835 ("net: phy: realtek: disable PHY-mode EEE") Signed-off-by: Marek Vasut <marek.vasut@mailbox.org> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20251011110309.12664-1-marek.vasut@mailbox.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Intel Wired LAN Driver Updates 2025-10-01 (idpf, ixgbe, ixgbevf)
For idpf:
Milena fixes a memory leak in the idpf reset logic when the driver resets
with an outstanding Tx timestamp.
For ixgbe and ixgbevf:
Jedrzej fixes an issue with reporting link speed on E610 VFs.
Jedrzej also fixes the VF mailbox API incompatibilities caused by the
confusion with API v1.4, v1.5, and v1.6. The v1.4 API introduced IPSEC
offload, but this was only supported on Linux hosts. The v1.5 API
introduced a new mailbox API which is necessary to resolve issues on ESX
hosts. The v1.6 API introduced a new link management API for E610. Jedrzej
introduces a new v1.7 API with a feature negotiation which enables properly
checking if features such as IPSEC or the ESX mailbox APIs are supported.
This resolves issues with compatibility on different hosts, and aligns the
API across hosts instead of having Linux require custom mailbox API
versions for IPSEC offload.
Koichiro fixes a KASAN use-after-free bug in ixgbe_remove().
====================
Koichiro Den [Fri, 10 Oct 2025 00:03:51 +0000 (17:03 -0700)]
ixgbe: fix too early devlink_free() in ixgbe_remove()
Since ixgbe_adapter is embedded in devlink, calling devlink_free()
prematurely in the ixgbe_remove() path can lead to UAF. Move devlink_free()
to the end.
Jedrzej Jagielski [Fri, 10 Oct 2025 00:03:49 +0000 (17:03 -0700)]
ixgbevf: fix mailbox API compatibility by negotiating supported features
There was backward compatibility in the terms of mailbox API. Various
drivers from various OSes supporting 10G adapters from Intel portfolio
could easily negotiate mailbox API.
This convention has been broken since introducing API 1.4.
Commit 0062e7cc955e ("ixgbevf: add VF IPsec offload code") added support
for IPSec which is specific only for the kernel ixgbe driver. None of the
rest of the Intel 10G PF/VF drivers supports it. And actually lack of
support was not included in the IPSec implementation - there were no such
code paths. No possibility to negotiate support for the feature was
introduced along with introduction of the feature itself.
Commit 339f28964147 ("ixgbevf: Add support for new mailbox communication
between PF and VF") increasing API version to 1.5 did the same - it
introduced code supported specifically by the PF ESX driver. It altered API
version for the VF driver in the same time not touching the version
defined for the PF ixgbe driver. It led to additional discrepancies,
as the code provided within API 1.6 cannot be supported for Linux ixgbe
driver as it causes crashes.
The issue was noticed some time ago and mitigated by Jake within the commit d0725312adf5 ("ixgbevf: stop attempting IPSEC offload on Mailbox API 1.5").
As a result we have regression for IPsec support and after increasing API
to version 1.6 ixgbevf driver stopped to support ESX MBX.
To fix this mess add new mailbox op asking PF driver about supported
features. Basing on a response determine whether to set support for IPSec
and ESX-specific enhanced mailbox.
New mailbox op, for compatibility purposes, must be added within new API
revision, as API version of OOT PF & VF drivers is already increased to
1.6 and doesn't incorporate features negotiate op.
Features negotiation mechanism gives possibility to be extended with new
features when needed in the future.
Reported-by: Jacob Keller <jacob.e.keller@intel.com> Closes: https://lore.kernel.org/intel-wired-lan/20241101-jk-ixgbevf-mailbox-v1-5-fixes-v1-0-f556dc9a66ed@intel.com/ Fixes: 0062e7cc955e ("ixgbevf: add VF IPsec offload code") Fixes: 339f28964147 ("ixgbevf: Add support for new mailbox communication between PF and VF") Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-4-ef32a425b92a@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update supported API version and provide handler for
IXGBE_VF_GET_PF_LINK_STATE cmd.
Simply put stored values of link speed and link_up from adapter context.
Jedrzej Jagielski [Fri, 10 Oct 2025 00:03:47 +0000 (17:03 -0700)]
ixgbevf: fix getting link speed data for E610 devices
E610 adapters no longer use the VFLINKS register to read PF's link
speed and linkup state. As a result VF driver cannot get actual link
state and it incorrectly reports 10G which is the default option.
It leads to a situation where even 1G adapters print 10G as actual
link speed. The same happens when PF driver set speed different than 10G.
Add new mailbox operation to let the VF driver request a PF driver
to provide actual link data. Update the mailbox api to v1.6.
Incorporate both ways of getting link status within the legacy
ixgbe_check_mac_link_vf() function.
Fixes: 4c44b450c69b ("ixgbevf: Add support for Intel(R) E610 device") Co-developed-by: Andrzej Wilczynski <andrzejx.wilczynski@intel.com> Signed-off-by: Andrzej Wilczynski <andrzejx.wilczynski@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-2-ef32a425b92a@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Milena Olech [Fri, 10 Oct 2025 00:03:46 +0000 (17:03 -0700)]
idpf: cleanup remaining SKBs in PTP flows
When the driver requests Tx timestamp value, one of the first steps is
to clone SKB using skb_get. It increases the reference counter for that
SKB to prevent unexpected freeing by another component.
However, there may be a case where the index is requested, SKB is
assigned and never consumed by PTP flows - for example due to reset during
running PTP apps.
Add a check in release timestamping function to verify if the SKB
assigned to Tx timestamp latch was freed, and release remaining SKBs.
Fixes: 4901e83a94ef ("idpf: add Tx timestamp capabilities negotiation") Signed-off-by: Milena Olech <milena.olech@intel.com> Signed-off-by: Anton Nadezhdin <anton.nadezhdin@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-1-ef32a425b92a@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dmitry Safonov [Thu, 9 Oct 2025 15:02:19 +0000 (16:02 +0100)]
net/ip6_tunnel: Prevent perpetual tunnel growth
Similarly to ipv4 tunnel, ipv6 version updates dev->needed_headroom, too.
While ipv4 tunnel headroom adjustment growth was limited in
commit 5ae1e9922bbd ("net: ip_tunnel: prevent perpetual headroom growth"),
ipv6 tunnel yet increases the headroom without any ceiling.
Reflect ipv4 tunnel headroom adjustment limit on ipv6 version.
Credits to Francesco Ruggeri, who was originally debugging this issue
and wrote local Arista-specific patch and a reproducer.
The Broadcom bcm54811 is hardware-strapped to select among RGMII and
GMII/MII/MII-Lite modes. However, the corresponding bit, RGMII Enable
in Miscellaneous Control Register must be also set to select desired
RGMII or MII(-lite)/GMII mode.
Linmao Li [Thu, 9 Oct 2025 12:25:49 +0000 (20:25 +0800)]
r8169: fix packet truncation after S4 resume on RTL8168H/RTL8111H
After resume from S4 (hibernate), RTL8168H/RTL8111H truncates incoming
packets. Packet captures show messages like "IP truncated-ip - 146 bytes
missing!".
The issue is caused by RxConfig not being properly re-initialized after
resume. Re-initializing the RxConfig register before the chip
re-initialization sequence avoids the truncation and restores correct
packet reception.
This follows the same pattern as commit ef9da46ddef0 ("r8169: fix data
corruption issue on RTL8402").
Fixes: 6e1d0b898818 ("r8169:add support for RTL8168H and RTL8107E") Signed-off-by: Linmao Li <lilinmao@kylinos.cn> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/20251009122549.3955845-1-lilinmao@kylinos.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sebastian Andrzej Siewior [Thu, 9 Oct 2025 09:43:38 +0000 (11:43 +0200)]
net: gro_cells: Use nested-BH locking for gro_cell
The gro_cell data structure is per-CPU variable and relies on disabled
BH for its locking. Without per-CPU locking in local_bh_disable() on
PREEMPT_RT this data structure requires explicit locking.
Add a local_lock_t to the data structure and use
local_lock_nested_bh() for locking. This change adds only lockdep
coverage and does not alter the functional behaviour for !PREEMPT_RT.
Reported-by: syzbot+8715dd783e9b0bef43b1@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/68c6c3b1.050a0220.2ff435.0382.GAE@google.com/ Fixes: 3253cb49cbad ("softirq: Allow to drop the softirq-BKL lock on PREEMPT_RT") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://patch.msgid.link/20251009094338.j1jyKfjR@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ivan Vecera [Wed, 8 Oct 2025 14:14:45 +0000 (16:14 +0200)]
dpll: zl3073x: Handle missing or corrupted flash configuration
If the internal flash contains missing or corrupted configuration,
basic communication over the bus still functions, but the device
is not capable of normal operation (for example, using mailboxes).
This condition is indicated in the info register by the ready bit.
If this bit is cleared, the probe procedure times out while fetching
the device state.
Handle this case by checking the ready bit value in zl3073x_dev_start()
and skipping DPLL device and pin registration if it is cleared.
Do not report this condition as an error, allowing the devlink device
to be registered and enabling the user to flash the correct configuration.
Prior this patch:
[ 31.112299] zl3073x-i2c 1-0070: Failed to fetch input state: -ETIMEDOUT
[ 31.116332] zl3073x-i2c 1-0070: error -ETIMEDOUT: Failed to start device
[ 31.136881] zl3073x-i2c 1-0070: probe with driver zl3073x-i2c failed with error -110
After this patch:
[ 41.011438] zl3073x-i2c 1-0070: FW not fully ready - missing or corrupted config
Fixes: 75a71ecc24125 ("dpll: zl3073x: Register DPLL devices and pins") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251008141445.841113-1-ivecera@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In this example, we should give the relative map of the target block device
ranging from 0x3caa9 to 0x3ffa9 where the length should be calculated by
0x37ebfff + 1 - 0x37ebfa9.
In the below equation, however, map->m_pblk was supposed to be the original
address instead of the one from the target block address.
Gustavo A. R. Silva [Fri, 3 Oct 2025 14:11:06 +0000 (15:11 +0100)]
btrfs: send: fix -Wflex-array-member-not-at-end warning in struct send_ctx
The warning -Wflex-array-member-not-at-end was introduced in GCC-14, and
we are getting ready to enable it, globally.
Fix the following warning:
fs/btrfs/send.c:181:24: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
and move the declaration of send_ctx::cur_inode_path to the end.
Notice that struct fs_path contains a flexible array member inline_buf,
but also a padding array and a limit calculated for the usable space of
inline_buf (FS_PATH_INLINE_SIZE). It is not the pattern where flexible
array is in the middle of a structure and could potentially overwrite
other members.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Dan Carpenter [Wed, 8 Oct 2025 15:08:58 +0000 (18:08 +0300)]
btrfs: tree-checker: fix bounds check in check_inode_extref()
The parentheses for the unlikely() annotation were put in the wrong
place so it means that the condition is basically never true and the
bounds checking is skipped.
Fixes: aab9458b9f00 ("btrfs: tree-checker: add inode extref checks") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
btrfs: fix memory leaks when rejecting a non SINGLE data profile without an RST
At the end of btrfs_load_block_group_zone_info() the first thing we do
is to ensure that if the mapping type is not a SINGLE one and there is
no RAID stripe tree, then we return early with an error.
Doing that, though, prevents the code from running the last calls from
this function which are about freeing memory allocated during its
run. Hence, in this case, instead of returning early, we set the ret
value and fall through the rest of the cleanup code.
Fixes: 5906333cc4af ("btrfs: zoned: don't skip block group profile checks on conventional zones") CC: stable@vger.kernel.org # 6.8+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Miquel Sabaté Solà <mssola@mssola.com> Signed-off-by: David Sterba <dsterba@suse.com>
Boris Burkov [Wed, 1 Oct 2025 04:05:17 +0000 (21:05 -0700)]
btrfs: fix incorrect readahead expansion length
The intent of btrfs_readahead_expand() was to expand to the length of
the current compressed extent being read. However, "ram_bytes" is *not*
that, in the case where a single physical compressed extent is used for
multiple file extents.
Consider this case with a large compressed extent C and then later two
non-compressed extents N1 and N2 written over C, leaving C1 and C2
pointing to offset/len pairs of C:
[ C ]
[ N1 ][ C1 ][ N2 ][ C2 ]
In such a case, ram_bytes for both C1 and C2 is the full uncompressed
length of C. So starting readahead in C1 will expand the readahead past
the end of C1, past N2, and into C2. This will then expand readahead
again, to C2_start + ram_bytes, way past EOF. First of all, this is
totally undesirable, we don't want to read the whole file in arbitrary
chunks of the large underlying extent if it happens to exist. Secondly,
it results in zeroing the range past the end of C2 up to ram_bytes. This
is particularly unpleasant with fs-verity as it can zero and set
uptodate pages in the verity virtual space past EOF. This incorrect
readahead behavior can lead to verity verification errors, if we iterate
in a way that happens to do the wrong readahead.
Fix this by using em->len for readahead expansion, not em->ram_bytes,
resulting in the expected behavior of stopping readahead at the extent
boundary.
Reported-by: Max Chernoff <git@maxchernoff.ca> Link: https://bugzilla.redhat.com/show_bug.cgi?id=2399898 Fixes: 9e9ff875e417 ("btrfs: use readahead_expand() on compressed extents") CC: stable@vger.kernel.org # 6.17 Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Wed, 1 Oct 2025 10:08:13 +0000 (11:08 +0100)]
btrfs: do not assert we found block group item when creating free space tree
Currently, when building a free space tree at populate_free_space_tree(),
if we are not using the block group tree feature, we always expect to find
block group items (either extent items or a block group item with key type
BTRFS_BLOCK_GROUP_ITEM_KEY) when we search the extent tree with
btrfs_search_slot_for_read(), so we assert that we found an item. However
this expectation is wrong since we can have a new block group created in
the current transaction which is still empty and for which we still have
not added the block group's item to the extent tree, in which case we do
not have any items in the extent tree associated to the block group.
The insertion of a new block group's block group item in the extent tree
happens at btrfs_create_pending_block_groups() when it calls the helper
insert_block_group_item(). This typically is done when a transaction
handle is released, committed or when running delayed refs (either as
part of a transaction commit or when serving tickets for space reservation
if we are low on free space).
So remove the assertion at populate_free_space_tree() even when the block
group tree feature is not enabled and update the comment to mention this
case.
Syzbot reported this with the following stack trace:
btrfs: do not use folio_test_partial_kmap() in ASSERT()s
[BUG]
Syzbot reported an ASSERT() triggered inside scrub:
BTRFS info (device loop0): scrub: started on devid 1
assertion failed: !folio_test_partial_kmap(folio) :: 0, in fs/btrfs/scrub.c:697
------------[ cut here ]------------
kernel BUG at fs/btrfs/scrub.c:697!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 0 UID: 0 PID: 6077 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025
RIP: 0010:scrub_stripe_get_kaddr+0x1bb/0x1c0 fs/btrfs/scrub.c:697
Call Trace:
<TASK>
scrub_bio_add_sector fs/btrfs/scrub.c:932 [inline]
scrub_submit_initial_read+0xf21/0x1120 fs/btrfs/scrub.c:1897
submit_initial_group_read+0x423/0x5b0 fs/btrfs/scrub.c:1952
flush_scrub_stripes+0x18f/0x1150 fs/btrfs/scrub.c:1973
scrub_stripe+0xbea/0x2a30 fs/btrfs/scrub.c:2516
scrub_chunk+0x2a3/0x430 fs/btrfs/scrub.c:2575
scrub_enumerate_chunks+0xa70/0x1350 fs/btrfs/scrub.c:2839
btrfs_scrub_dev+0x6e7/0x10e0 fs/btrfs/scrub.c:3153
btrfs_ioctl_scrub+0x249/0x4b0 fs/btrfs/ioctl.c:3163
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
---[ end trace 0000000000000000 ]---
Which doesn't make much sense, as all the folios we allocated for scrub
should not be highmem.
[CAUSE]
Thankfully syzbot has a detailed kernel config file, showing that
CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP is set to y.
And that debug option will force all folio_test_partial_kmap() to return
true, to improve coverage on highmem tests.
But in our case we really just want to make sure the folios we allocated
are not highmem (and they are indeed not). Such incorrect result from
folio_test_partial_kmap() is just screwing up everything.
[FIX]
Replace folio_test_partial_kmap() to folio_test_highmem() so that we
won't bother those highmem specific debuging options.
Fixes: 5fbaae4b8567 ("btrfs: prepare scrub to support bs > ps cases") Reported-by: syzbot+bde59221318c592e6346@syzkaller.appspotmail.com Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
projects / users / hch / misc.git / log