Arnd Bergmann [Tue, 3 May 2022 13:25:36 +0000 (15:25 +0200)]
Merge tag 'bindings-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Clock binding updates for omaps
Minor clock binding changes to document clock-output-names usage for omaps
so we can fix lots of related dt bindings check warnings. The related driver
changes already got merged for v5.18.
* tag 'bindings-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
dt-bindings: clock: ti: Add clock-output-names for TI composite clocks
dt-bindings: clock: ti: Add clock-output-names for clockctrl
dt-bindings: omap: Add clock-output-names and #clock-cells
Arnd Bergmann [Tue, 3 May 2022 13:24:08 +0000 (15:24 +0200)]
Merge tag 'renesas-arm-dt-for-v5.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.19
- ADC, SDHI, CAN-FD, I2C, QSPI, timer, watchdog, sound, USB, SPI, GPU,
cpufreq, and thermal support for the RZ/V2L SoC, and the RZ/V2L
SMARC EVK development board,
- USB, I2C, Audio, NOR Flash, timer, SPI support for RZ/G2LC SMARC EVK
development board,
- Can-FD support for the R-Car M30W+ and V3U SoCs, and the Falcon
development board,
- I2C and GPIO support for the R-Car S4-8 SoC,
- I2C EEPROM support for the Falcon development board,
- SPI Multi I/O Bus Controller (RPC-IF) support for the R-Car H3,
M3-W(+), M3-N, E3, and D3 SoCs,
- RPC HyperFlash support for the Draak, Ebisu, Salvator-X(S), and ULCB
development boards,
- Initial support (UART, DMAC, pin control, SDHI, eMMC, Ethernet) for
the RZ/G2UL SoC, and the RZ/G2UL SMARC EVK development board,
- Miscellaneous fixes and improvements.
Merge tag 'samsung-dt64-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.19
1. Cleanup: move aliases of board-related features to board in
Exynos850.
2. Add specific compatibles to Multi Core Timer to allow stricter DT
schema matching.
* tag 'samsung-dt64-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: tesla: add a specific compatible to MCT on FSD
arm64: dts: exynos: add a specific compatible to MCT
arm64: dts: exynos: move aliases to board in Exynos850
Merge tag 'samsung-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.19
1. Several DT schema related changes to make DTBs passing schema checks:
EHCI/OHCI/DMA/Ethernet node names, DMA channels order, USB-like
compatibles.
2. Add specific compatibles to Multi Core Timer to allow stricter DT
schema matching.
3. Cleanup from deprecated bindings:
- Remove deprecated unit-address workaround for Exynos5422 Odroid XU3
LPDDR3 memory timings.
- Do not use unit-address (and SFR region) in Exynos5250 MIPI phy in
favor of syscon node (unit-address deprecated in 2016).
- Use standard generic PHYs for EHCI/OHCI device in S5PV210.
4. Fix inverted SPI CS (thus blank panel) on S5PV210 Aries boards.
5. Correct Bluetooth interupt name on S5PV210 Aries boards.
* tag 'samsung-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: s5pv210: align DMA channels with dtschema
ARM: dts: s5pv210: Adjust DMA node names to match spec
ARM: dts: s5pv210: Adjust memory reg entries to match spec
ARM: dts: s5pv210: Correct interrupt name for bluetooth in Aries
ARM: dts: s5pv210: Remove spi-cs-high on panel in Aries
ARM: dts: s5pv210: Use standard arrays of generic PHYs for EHCI/OHCI device
ARM: dts: s5pv210: align EHCI/OHCI nodes with dtschema
ARM: dts: exynos: align EHCI/OHCI nodes with dtschema on Exynos4
ARM: dts: exynos: drop deprecated SFR region from MIPI phy
ARM: dts: exynos: add a specific compatible to MCT
ARM: dts: exynos: remove deprecated unit address for LPDDR3 timings on Odroid
ARM: dts: exynos: fix compatible strings for Ethernet USB devices
ARM: dts: exynos: fix ethernet node name for different odroid boards
Merge tag 'dt-cleanup-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Minor cleanup of ARM DTS for v5.19
Align node names and unit addresses to DT schema and DT coding style in
nspire, ox820 and socfpga.
* tag 'dt-cleanup-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: socfpga: align interrupt controller node name with dtschema
ARM: dts: ox820: align interrupt controller node name with dtschema
ARM: dts: nspire: use lower case hex addresses in node unit addresses
ARM: dts: am335x-baltos: update MPU regulator range
Update the max MPU voltage range to align with the maximum
possible value allowed in the operating-points table, which is max
target voltage of 132500 uV + 2%.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Message-Id: <20220419143923.25196-1-yegorslists@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Update partition table to save env and splash image
* GPMC config values optimized for Bosch Guardian Board
* NAND Chip used by Bosch Guardian Board is Micron MT29F4G08ABBFA
Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com>
Message-Id: <20220325100613.1494-2-Gireesh.Hiremath@in.bosch.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Oleksij Rempel [Wed, 16 Feb 2022 07:49:25 +0000 (08:49 +0100)]
ARM: dts: omap3/4/5: fix ethernet node name for different OMAP boards
The node name of Ethernet controller should be "ethernet" instead of
"usbether" as required by Ethernet controller devicetree schema:
Documentation/devicetree/bindings/net/ethernet-controller.yaml
This patch can potentially affect boot loaders patching against full
node path instead of using device aliases.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Message-Id: <20220216074927.3619425-8-o.rempel@pengutronix.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: dts: r9a06g032: Drop "arm,cortex-a7-timer" from timer node
"make dtbs_check":
arch/arm/boot/dts/r9a06g032-rzn1d400-db.dt.yaml: timer: compatible: 'oneOf' conditional failed, one must be fixed:
['arm,cortex-a7-timer', 'arm,armv7-timer'] is too long
'arm,cortex-a7-timer' is not one of ['arm,cortex-a15-timer']
'arm,cortex-a7-timer' is not one of ['arm,armv7-timer']
'arm,cortex-a7-timer' is not one of ['arm,armv8-timer']
From schema: Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
The Cortex-A7 timer should just declare compatibility with
"arm,armv7-timer".
Biju Das [Sat, 2 Apr 2022 08:13:26 +0000 (09:13 +0100)]
arm64: dts: renesas: rzg2ul-smarc: Enable microSD on SMARC platform
Enable the microSD card slot connected to SDHI1 on the RZ/G2UL SMARC
platform by removing the sdhi1 override which disabled it, and by adding
the necessary pinmux required for SDHI1.
This patch also adds gpios property to vccq_sdhi1 regulator.
Biju Das [Sat, 2 Apr 2022 08:13:23 +0000 (09:13 +0100)]
arm64: dts: renesas: rzg2ul-smarc: Add scif0 and audio clk pins
Add scif0 and audio clk pins to soc pinctrl dtsi and drop deleting
the pinctrl-0 and pinctrl-names properties for scif0 node so that
we now actually make use of these properties for scif0.
Biju Das [Tue, 12 Apr 2022 16:13:14 +0000 (17:13 +0100)]
arm64: dts: renesas: Add initial device tree for RZ/G2UL Type-1 SMARC EVK
Add basic support for RZ/G2UL SMARC EVK (based on R9A07G043U11):
- memory
- External input clock
- CPG
- DMA
- SCIF
It shares the same carrier board with RZ/G2L, but the pin mapping is
different. Disable the device nodes which are not tested and delete the
corresponding pinctrl definitions.
Biju Das [Tue, 12 Apr 2022 16:13:13 +0000 (17:13 +0100)]
arm64: dts: renesas: Add initial DTSI for RZ/G2UL SoC
Add initial DTSI for RZ/G2UL SoC.
Both RZ/G2L and RZ/G2UL uses the same SMARC EVK. Therefore they share
the common dtsi (rz-smarc.dtsi) file. Place holders are added in
device nodes to avoid compilation errors for the devices which have
not been enabled yet on RZ/G2UL SoC.
Biju Das [Fri, 1 Apr 2022 17:54:27 +0000 (18:54 +0100)]
arm64: dts: renesas: rzg2l-smarc: Move gpios property of vccq_sdhi1 from common dtsi
On RZ/G2{L,LC} SoM module, gpio for power selection is connected to
P39_1 whereas on RZ/G2UL it is connected to P6_1. So move gpios property
of vccq_sdhi1 regulator from common dtsi to soc specific dtsi.
Biju Das [Fri, 1 Apr 2022 14:57:02 +0000 (15:57 +0100)]
arm64: dts: renesas: rzg2lc-smarc: Enable RSPI1 on carrier board
RSPI1 (SPI1) interface is available on PMOD0 connector (J1) on the
carrier board. This patch adds pinmux and spi1 nodes to the carrier
board dtsi file and drops deleting pinctl* properties from DTS file.
RSPI1 interface is tested by setting the macro SW_RSPI_CAN to 0.
Add device nodes for the SPI Multi I/O Bus Controllers (RPC-IF) on the
various R-Car Gen3 SoCs that do not have support for them yet in their
device trees (R-Car H3, M3-W, M3-W+, M3-N, E3, and D3).
Biju Das [Sat, 2 Apr 2022 07:30:34 +0000 (08:30 +0100)]
dt-bindings: clock: Add R9A07G043 CPG Clock and Reset Definitions
Define RZ/G2UL (R9A07G043U) Clock Pulse Generator Core Clock and module
clock outputs, as listed in Table 7.1.4.2 ("Clock List r0.51") and also
add Reset definitions referring to registers CPG_RST_* in Section 7.2.3
("Register configuration") of the RZ/G2UL Hardware User's Manual (Rev.
0.51, Nov. 2021).
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220402073037.23947-3-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Document the Renesas SMARC EVK board which is based on the Renesas
RZ/G2UL Type-1 (R9A07G043U11) SoC. The SMARC EVK consists of an
RZ/G2UL Type-1 SoM module and a SMARC carrier board. The SoM module
sits on top of the carrier board.
Tony Lindgren [Fri, 4 Feb 2022 08:43:38 +0000 (10:43 +0200)]
ARM: dts: Drop custom clkctrl compatible and update omap5 l4per
We can now use the clock-output-names and don't need custom compatible
values for each clkctrl instance. And we can use a generic name also for
the clock manager instance.
Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Message-Id: <20220204084339.12341-5-tony@atomide.com>
Tony Lindgren [Fri, 4 Feb 2022 08:43:37 +0000 (10:43 +0200)]
ARM: dts: Add clock-output-names for omap5
To stop using the non-standard node name based clock naming, let's
first add the clock-output-names property. This allows us to stop using
the internal legacy clock naming and unify the naming for the TI SoCs in
the following patches.
Note that we must wait on fixing the node naming issues until after the
internal clock names have been updated to avoid adding name translation
unnecessarily.
Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Message-Id: <20220204084339.12341-4-tony@atomide.com>
Tony Lindgren [Fri, 4 Feb 2022 08:43:36 +0000 (10:43 +0200)]
ARM: dts: Drop custom clkctrl compatible and update omap4 l4per
We can now use the clock-output-names and don't need custom compatible
values for each clkctrl instance. And we can use a generic name also for
the clock manager instance.
Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Message-Id: <20220204084339.12341-3-tony@atomide.com>
Tony Lindgren [Fri, 4 Feb 2022 08:43:35 +0000 (10:43 +0200)]
ARM: dts: Add clock-output-names for omap4
To stop using the non-standard node name based clock naming, let's
first add the clock-output-names property. This allows us to stop using
the internal legacy clock naming and unify the naming for the TI SoCs in
the following patches.
Note that we must wait on fixing the node naming issues until after the
internal clock names have been updated to avoid adding name translation
unnecessarily.
Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Message-Id: <20220204084339.12341-2-tony@atomide.com>
Tony Lindgren [Fri, 4 Feb 2022 08:15:29 +0000 (10:15 +0200)]
ARM: dts: Use clock-output-names for am4
With the TI clocks supporting the use of clock-output-names devicetree
property, we no longer need to use non-standard node names for clocks.
Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Message-Id: <20220204081529.57694-1-tony@atomide.com>
Tony Lindgren [Fri, 4 Feb 2022 08:08:42 +0000 (10:08 +0200)]
ARM: dts: Use clock-output-names for dra7
With the TI clocks supporting the use of clock-output-names devicetree
property, we no longer need to use non-standard node names for clocks.
Depends-on: 31aa7056bbec ("ARM: dts: Don't use legacy clock defines for dra7 clkctrl")
Depends-on: 9206a3af4fc0 ("clk: ti: Move dra7 clock devices out of the legacy section") Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Message-Id: <20220204080842.40673-1-tony@atomide.com>
Tony Lindgren [Fri, 4 Feb 2022 07:33:33 +0000 (09:33 +0200)]
ARM: dts: Use clock-output-names for am3
With the TI clocks supporting the use of clock-output-names devicetree
property, we no longer need to use non-standard node names for clocks.
Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Message-Id: <20220204073333.18175-5-tony@atomide.com>
Tony Lindgren [Fri, 4 Feb 2022 07:33:32 +0000 (09:33 +0200)]
ARM: dts: Add clksel node for am3 clkout
Let's add a clksel node for the component clocks to avoid devicetree
unique_unit_address warnings. The component clocks can now get IO address
from the parent clksel node.
Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Message-Id: <20220204073333.18175-4-tony@atomide.com>
Tony Lindgren [Fri, 4 Feb 2022 07:33:31 +0000 (09:33 +0200)]
ARM: dts: Add clksel node for am3 gfx
Let's add a clksel node for the component clocks to avoid devicetree
unique_unit_address warnings. The component clocks can now get IO address
from the parent clksel node.
Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Message-Id: <20220204073333.18175-3-tony@atomide.com>
Tony Lindgren [Fri, 4 Feb 2022 07:33:30 +0000 (09:33 +0200)]
ARM: dts: Add clksel node for am3 ehrpwm
Let's add a clksel node for the component clocks to avoid devicetree
unique_unit_address warnings. The component clocks can now get IO address
from the parent clksel node.
Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Message-Id: <20220204073333.18175-2-tony@atomide.com>
Tony Lindgren [Thu, 3 Feb 2022 11:23:37 +0000 (13:23 +0200)]
dt-bindings: clock: ti: Add clock-output-names for TI composite clocks
For the TI composite clocks, we currently have only the divider clock
list clock-output-names as an optional devicetree property. Let's add
clock-output-names for all the TI composite clock bindings.
This allows us to use clock-output-names for the clockctrl instance name
instead of relying on a custom compatible or non-standard node names.
Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org>
Message-Id: <20220203112337.19821-3-tony@atomide.com>
Tony Lindgren [Thu, 3 Feb 2022 11:23:36 +0000 (13:23 +0200)]
dt-bindings: clock: ti: Add clock-output-names for clockctrl
This allows us to use clock-output-names for the clockctrl instance
name instead of relying on a custom compatible or non-standard node
names.
Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org>
Message-Id: <20220203112337.19821-2-tony@atomide.com>
Tony Lindgren [Thu, 3 Feb 2022 11:23:35 +0000 (13:23 +0200)]
dt-bindings: omap: Add clock-output-names and #clock-cells
This allows us to use clock-output-names for the clock manager instance
name instead of relying on non-standard node names.
Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org>
Message-Id: <20220203112337.19821-1-tony@atomide.com>
Krzysztof Kozlowski [Sun, 27 Mar 2022 18:08:54 +0000 (11:08 -0700)]
ARM: dts: s5pv210: align DMA channels with dtschema
dtschema expects DMA channels in specific order (tx, rx and tx-sec).
The order actually should not matter because dma-names is used however
let's make it aligned with dtschema to suppress warnings like:
i2s@eee30000: dma-names: ['rx', 'tx', 'tx-sec'] is not valid under any of the given schemas
Jonathan Bakker [Sun, 27 Mar 2022 18:08:50 +0000 (11:08 -0700)]
ARM: dts: s5pv210: Remove spi-cs-high on panel in Aries
Since commit 766c6b63aa04 ("spi: fix client driver breakages when using
GPIO descriptors"), the panel has been blank due to an inverted CS GPIO.
In order to correct this, drop the spi-cs-high from the panel SPI device.
Krzysztof Kozlowski [Thu, 7 Apr 2022 20:41:15 +0000 (22:41 +0200)]
arm64: dts: synaptics: remove unused DTSI for AS370
The as370.dtsi for Synaptics AS370 SoC does not have a user (DTS board
file), is uncompilable and untestable. It was added back in 2018. No
user appeared since that time, so assume it won't be added.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tony Lindgren [Thu, 31 Mar 2022 06:23:01 +0000 (09:23 +0300)]
iommu/omap: Fix regression in probe for NULL pointer dereference
Commit 3f6634d997db ("iommu: Use right way to retrieve iommu_ops") started
triggering a NULL pointer dereference for some omap variants:
__iommu_probe_device from probe_iommu_group+0x2c/0x38
probe_iommu_group from bus_for_each_dev+0x74/0xbc
bus_for_each_dev from bus_iommu_probe+0x34/0x2e8
bus_iommu_probe from bus_set_iommu+0x80/0xc8
bus_set_iommu from omap_iommu_init+0x88/0xcc
omap_iommu_init from do_one_initcall+0x44/0x24
This is caused by omap iommu probe returning 0 instead of ERR_PTR(-ENODEV)
as noted by Jason Gunthorpe <jgg@ziepe.ca>.
Looks like the regression already happened with an earlier commit 6785eb9105e3 ("iommu/omap: Convert to probe/release_device() call-backs")
that changed the function return type and missed converting one place.
Cc: Drew Fustini <dfustini@baylibre.com> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: Suman Anna <s-anna@ti.com> Suggested-by: Jason Gunthorpe <jgg@ziepe.ca> Fixes: 6785eb9105e3 ("iommu/omap: Convert to probe/release_device() call-backs") Fixes: 3f6634d997db ("iommu: Use right way to retrieve iommu_ops") Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Drew Fustini <dfustini@baylibre.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20220331062301.24269-1-tony@atomide.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
Krzysztof Kozlowski [Mon, 4 Apr 2022 16:56:11 +0000 (18:56 +0200)]
ARM: dts: s5pv210: Use standard arrays of generic PHYs for EHCI/OHCI device
Move USB PHYs to a standard arrays for S5PV210 EHCI/OHCI devices. This
resolves the conflict between S5PV210 EHCI/OHCI sub-nodes and generic USB
device bindings.
Krzysztof Kozlowski [Mon, 4 Apr 2022 16:54:46 +0000 (18:54 +0200)]
ARM: dts: exynos: drop deprecated SFR region from MIPI phy
Commit e4b3d38088df ("phy: exynos-video-mipi: Fix regression by adding
support for PMU regmap") deprecated the usage of unit address in MIPI
phy node, in favor of a syscon phandle. Deprecating was a correct
approach because that unit address was actually coming from Power
Management Unit SFR range so its usage here caused overlapped memory
mapping.
In 2016 commit 26dbadba495f ("phy: exynos-mipi-video: Drop support for
direct access to PMU") fully removed support for parsing that MIPI phy
unit address (SFR range) but the address stayed in Exynos5250 DTSI for
compatibility reasons.
Remove that deprecated unit address from Exynos5250 MIPI phy, because it
has been almost 6 years since it was deprecated and it causes now DT
schema validation warnings:
video-phy@10040710: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
Any out-of-tree users of Exynos5250 DTSI, should update their code to
use newer syscon property.
Krzysztof Kozlowski [Mon, 4 Apr 2022 16:53:08 +0000 (18:53 +0200)]
arm64: dts: tesla: add a specific compatible to MCT on FSD
One compatible is used for the Multi-Core Timer on Tesla FSD SoC, which
is correct but not specific enough. The MCT blocks have different
number of interrupts, so add a second specific compatible to Tesla FSD.
Krzysztof Kozlowski [Mon, 4 Apr 2022 16:52:55 +0000 (18:52 +0200)]
arm64: dts: exynos: add a specific compatible to MCT
One compatible is used for the Multi-Core Timer on most of the Samsung
Exynos SoCs, which is correct but not specific enough. These MCT blocks
have different number of interrupts, so add a second specific
compatible to Exynos5433 and Exynos850.
Krzysztof Kozlowski [Mon, 4 Apr 2022 16:51:20 +0000 (18:51 +0200)]
ARM: dts: exynos: add a specific compatible to MCT
One compatible is used for the Multi-Core Timer on most of the Samsung
Exynos SoCs, which is correct but not specific enough. These MCT blocks
have different number of interrupts, so add a second specific
compatible to Exynos3250 and all Exynos5 SoCs.
Krzysztof Kozlowski [Mon, 4 Apr 2022 16:47:40 +0000 (18:47 +0200)]
arm64: dts: exynos: move aliases to board in Exynos850
The aliases for typical blocks which are disabled by default in DTSI
(like I2C, UART and MMC) should be defined in the board DTS. The board
should add aliases only for enabled blocks according to its specific
order.
On Exynos850, move aliases of enabled blocks to E850-96 board and remove
unused ones.
Oleksij Rempel [Wed, 16 Feb 2022 07:49:24 +0000 (08:49 +0100)]
ARM: dts: exynos: fix compatible strings for Ethernet USB devices
Fix compatible string for Ethernet USB device as required by USB device schema:
Documentation/devicetree/bindings/usb/usb-device.yaml
The textual representation of VID and PID shall be in lower case hexadecimal
with leading zeroes suppressed.
Since there are no kernel driver matching against this compatibles, I
expect no regressions with this patch. At the same time, without this fix, we
are not be able to validate this device nodes with newly provided DT
schema.
Oleksij Rempel [Wed, 16 Feb 2022 07:49:23 +0000 (08:49 +0100)]
ARM: dts: exynos: fix ethernet node name for different odroid boards
The node name of Ethernet controller should be "ethernet" instead of
"usbether" as required by Ethernet controller devicetree schema:
Documentation/devicetree/bindings/net/ethernet-controller.yaml
This patch can potentially affect boot loaders patching against full
node path instead of using device aliases.
Kieran Bingham [Wed, 9 Mar 2022 19:06:31 +0000 (19:06 +0000)]
arm64: dts: renesas: falcon-cpu: Use INTC_EX for SN65DSI86
The INTC block is a better choice for handling the interrupts on the V3U
as the INTC will always be powered, while the GPIO block may be
de-clocked if not in use. Further more, it may be likely to have a lower
power consumption as it does not need to drive the pins.
Switch the interrupt parent and interrupts definition from gpio1 to
irq0 on intc_ex, and configure the PFC accordingly.
Biju Das [Thu, 3 Mar 2022 16:41:55 +0000 (16:41 +0000)]
arm64: dts: renesas: rzg2lc-smarc: Enable Audio
Enable Audio on RZ/G2LC SMARC EVK by deleting ssi0 entries from
board DT and adding pincontrol entries to the soc-pinctrl dtsi,
so that entries from common dtsi kick in and make audio functionality
operational.
Enable i2c{0,1} on RZ/G2LC SMARC EVK by deleting respective
entries from board dts and adding pincontrol entries to the
soc-pinctrl dtsi. Also enable i2c2 by adding to soc dtsi.
projects / users / jedix / linux-maple.git / log