Ryusuke Konishi [Tue, 7 Jan 2025 20:00:46 +0000 (05:00 +0900)]
nilfs2: do not force clear folio if buffer is referenced
Patch series "nilfs2: protect busy buffer heads from being force-cleared".
This series fixes the buffer head state inconsistency issues reported by
syzbot that occurs when the filesystem is corrupted and falls back to
read-only, and the associated buffer head use-after-free issue.
This patch (of 2):
Syzbot has reported that after nilfs2 detects filesystem corruption and
falls back to read-only, inconsistencies in the buffer state may occur.
One of the inconsistencies is that when nilfs2 calls mark_buffer_dirty()
to set a data or metadata buffer as dirty, but it detects that the buffer
is not in the uptodate state:
The other is when nilfs_btree_propagate(), which propagates the dirty
state to the ancestor nodes of a b-tree that point to a dirty buffer,
detects that the origin buffer is not dirty, even though it should be:
Both of these issues are caused by the callbacks that handle the
page/folio write requests, forcibly clear various states, including the
working state of the buffers they hold, at unexpected times when they
detect read-only fallback.
Fix these issues by checking if the buffer is referenced before clearing
the page/folio state, and skipping the clear if it is.
Su Yue [Mon, 6 Jan 2025 14:06:34 +0000 (22:06 +0800)]
ocfs2: remove parameter parent_fe_bh from __ocfs2_mknod_locked
The parameter is not used in __ocfs2_mknod_locked(). So remove it.
No functional change.
Link: https://lkml.kernel.org/r/20250106140634.92241-1-glass.su@suse.com Signed-off-by: Su Yue <glass.su@suse.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Su Yue [Mon, 6 Jan 2025 14:06:53 +0000 (22:06 +0800)]
ocfs2: mark dquot as inactive if failed to start trans while releasing dquot
While running fstests generic/329, the kernel workqueue
quota_release_workfn is dead looping in calling ocfs2_release_dquot().
The ocfs2 state is already readonly but ocfs2_release_dquot wants to
start a transaction but fails and returns.
=====================================================================
[ 2918.123602 ][ T275 ] On-disk corruption discovered. Please run
fsck.ocfs2 once the filesystem is unmounted.
[ 2918.124034 ][ T275 ] (kworker/u135:1,275,11):ocfs2_release_dquot:765
ERROR: status = -30
[ 2918.124452 ][ T275 ] (kworker/u135:1,275,11):ocfs2_release_dquot:795
ERROR: status = -30
[ 2918.124883 ][ T275 ] (kworker/u135:1,275,11):ocfs2_start_trans:357
ERROR: status = -30
[ 2918.125276 ][ T275 ] OCFS2: abort (device dm-0): ocfs2_start_trans:
Detected aborted journal
[ 2918.125710 ][ T275 ] On-disk corruption discovered. Please run
fsck.ocfs2 once the filesystem is unmounted.
=====================================================================
ocfs2_release_dquot() is much like dquot_release(), which is called by
ext4 to handle similar situation. So here fix it by marking the dquot as
inactive like what dquot_release() does.
Link: https://lkml.kernel.org/r/20250106140653.92292-1-glass.su@suse.com Fixes: 9e33d69f553a ("ocfs2: Implementation of local and global quota file handling") Signed-off-by: Su Yue <glass.su@suse.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The fuzz image has a truncate log inode whose tl_count is bigger than
ocfs2_truncate_recs_per_inode() so it triggers the BUG in
ocfs2_truncate_log_append().
As what the check in ocfs2_truncate_log_append() does, just do same check
into ocfs2_get_truncate_log_info when truncate log inode is reading in so
we can bail out earlier.
Link: https://lkml.kernel.org/r/20250108024119.60313-1-glass.su@suse.com Signed-off-by: Su Yue <glass.su@suse.com> Reported-by: Liebes Wang <wanghaichi0403@gmail.com> Link: https://lore.kernel.org/ocfs2-devel/CADCV8souQhdP0RdQF1U7KTWtuHDfpn+3LnTt-EEuMmB-pMRrgQ@mail.gmail.com/T/#u Reported-by: syzbot+a66542ca5ebb4233b563@syzkaller.appspotmail.com Tested-by: syzbot+a66542ca5ebb4233b563@syzkaller.appspotmail.com Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Julian Sun [Mon, 6 Jan 2025 02:34:32 +0000 (10:34 +0800)]
ocfs2: correct l_next_free_rec in online check
Correct the value of l_next_free_rec to l_count during the online check,
as done in the check_el() function in ocfs2_tools.
Link: https://lkml.kernel.org/r/20250106023432.1320904-2-sunjunchao2870@gmail.com Signed-off-by: Julian Sun <sunjunchao2870@gmail.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Julian Sun [Mon, 6 Jan 2025 02:34:31 +0000 (10:34 +0800)]
ocfs2: check el->l_next_free_rec in ocfs2_get_clusters_nocache
Recently syzbot reported a use-after-free issue[1].
The root cause of the problem is that the journal inode recorded in this
file system image is corrupted. The value of
"di->id2.i_list.l_next_free_rec" is 8193, which is greater than the value
of "di->id2.i_list.l_count" (19).
To solve this problem, an additional check should be added within
ocfs2_get_clusters_nocache(). If the check fails, an error will be
returned and the file system will be set to read-only.
Link: https://lkml.kernel.org/r/20250106023432.1320904-1-sunjunchao2870@gmail.com Signed-off-by: Julian Sun <sunjunchao2870@gmail.com> Reported-by: syzbot+2313dda4dc4885c93578@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=2313dda4dc4885c93578 Tested-by: syzbot+2313dda4dc4885c93578@syzkaller.appspotmail.com Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kuan-Wei Chiu [Mon, 6 Jan 2025 17:01:04 +0000 (01:01 +0800)]
lib/list_sort: clarify comparison function requirements in list_sort()
Add a detailed explanation in the list_sort() kernel doc comment
specifying that the comparison function must satisfy antisymmetry and
transitivity. These properties are essential for the sorting algorithm to
produce correct results.
Issues have arisen in the past [1][2][3][4] where comparison functions
violated the transitivity property, causing sorting algorithms to fail to
correctly order elements. While these requirements may seem
straightforward, they are commonly misunderstood or overlooked, leading to
bugs. Highlighting these properties in the documentation will help
prevent such mistakes in the future.
Kuan-Wei Chiu [Mon, 6 Jan 2025 17:01:03 +0000 (01:01 +0800)]
lib/sort: clarify comparison function requirements in sort_r()
Patch series "lib: clarify comparison function requirements", v2.
Add a detailed explanation in the sort_r/list_sort kernel doc comment
specifying that the comparison function must satisfy antisymmetry and
transitivity. These properties are essential for the sorting algorithm to
produce correct results.
Issues have arisen in the past [1][2][3][4] where comparison functions
violated the transitivity property, causing sorting algorithms to fail to
correctly order elements. While these requirements may seem
straightforward, they are commonly misunderstood or overlooked, leading to
bugs. Highlighting these properties in the documentation will help
prevent such mistakes in the future.
Add a detailed explanation in the sort_r() kernel doc comment specifying
that the comparison function must satisfy antisymmetry and transitivity.
These properties are essential for the sorting algorithm to produce
correct results.
Issues have arisen in the past [1][2][3][4] where comparison functions
violated the transitivity property, causing sorting algorithms to fail to
correctly order elements. While these requirements may seem
straightforward, they are commonly misunderstood or overlooked, leading to
bugs. Highlighting these properties in the documentation will help
prevent such mistakes in the future.
Rob Herring (Arm) [Tue, 31 Dec 2024 15:54:14 +0000 (09:54 -0600)]
MAINTAINERS: fix list entries with display names
get_maintainers.pl doesn't expect list entries to have a display name.
Entries with a display name are omitted and print just the description:
(open list:PIN CONTROLLER - FREESCALE)
These cases are pretty much aliases to a few people, not lists which are
archived and can be subscribed to. Change these cases to be reviewers
instead.
Matthew Wilcox (Oracle) [Fri, 20 Dec 2024 22:46:28 +0000 (22:46 +0000)]
squashfs: convert squashfs_fill_page() to take a folio
squashfs_fill_page is only used in this file, so make it static.
Use kmap_local instead of kmap_atomic, and return a bool so that
the caller can use folio_end_read() which saves an atomic operation
over calling folio_mark_uptodate() followed by folio_unlock().
Phillip Lougher [Sun, 29 Dec 2024 23:37:51 +0000 (23:37 +0000)]
Documentation: update the Squashfs filesystem documentation
This patch updates the following which are out of date.
- Zstd has been added to the compression algorithms supported.
- The filesystem mailing list (for the kernel code) is changed to
linux-fsdevel rather than the now very little used Sourceforge
mailing list.
- The Squashfs website has been changed to the Squashfs-tools github
repository.
- The fact that Squashfs-tools is likely packaged by the linux
distribution is mentioned.
Phillip Lougher [Sun, 29 Dec 2024 23:37:50 +0000 (23:37 +0000)]
squashfs: don't allocate read_page cache if SQUASHFS_FILE_DIRECT configured
If Squashfs has been configured to directly read datablocks into the page
cache (SQUASHFS_FILE_DIRECT), then the read_page cache is unnecessary.
This improvement is due to the following two commits, which added the
ability to read datablocks into the page cache when pages were missing,
enabling the fallback which used an intermediate buffer to be removed.
commit f268eedddf359 ("squashfs: extend "page actor" to handle missing pages")
commit 1bb1a07afad97 ("squashfs: don't use intermediate buffer if pages missing")
This reduces the amount of memory used when mounting a filesystem by
block_size * maximum number of threads.
Phillip Lougher [Sun, 29 Dec 2024 23:37:49 +0000 (23:37 +0000)]
squashfs: make squashfs_cache_init() return ERR_PTR(-ENOMEM)
Patch series "squashfs: reduce memory usage and update docs".
This patchset reduces the amount of memory that Squashfs uses when
CONFIG_FILE_DIRECT is configured, and updates various out of date
information in the documentation and Kconfig.
This patch (of 4):
Make squashfs_cache_init() return an ERR_PTR(-ENOMEM) on failure rather
than NULL.
This tidies up some calling code, but, it also allows NULL to be returned
as a valid result when a cache hasn't be allocated.
Wang Yaxin [Fri, 20 Dec 2024 09:31:05 +0000 (17:31 +0800)]
delayacct: add delay min to record delay peak
Delay accounting can now calculate the average delay of processes, detect
the overall system load, and also record the 'delay max' to identify
potential abnormal delays. However, 'delay min' can help us identify
another useful delay peak. By comparing the difference between 'delay
max' and 'delay min', we can understand the optimization space for
latency, providing a reference for the optimization of latency
performance.
Use case
=========
bash-4.4# ./getdelays -d -t 242
print delayacct stats ON
TGID 242
CPU count real total virtual total delay total delay average delay max delay min
39 1560000001565765792111069 0.054ms 0.212296ms 0.031307ms
IO count delay total delay average delay max delay min
0 0 0.000ms 0.000000ms 0.000000ms
SWAP count delay total delay average delay max delay min
0 0 0.000ms 0.000000ms 0.000000ms
RECLAIM count delay total delay average delay max delay min
0 0 0.000ms 0.000000ms 0.000000ms
THRASHING count delay total delay average delay max delay min
0 0 0.000ms 0.000000ms 0.000000ms
COMPACT count delay total delay average delay max delay min
0 0 0.000ms 0.000000ms 0.000000ms
WPCOPY count delay total delay average delay max delay min
156 11215873 0.072ms 0.207403ms 0.033913ms
IRQ count delay total delay average delay max delay min
0 0 0.000ms 0.000000ms 0.000000ms
Link: https://lkml.kernel.org/r/20241220173105906EOdsPhzjMLYNJJBqgz1ga@zte.com.cn Co-developed-by: Wang Yong <wang.yong12@zte.com.cn> Signed-off-by: Wang Yong <wang.yong12@zte.com.cn> Co-developed-by: xu xin <xu.xin16@zte.com.cn> Signed-off-by: xu xin <xu.xin16@zte.com.cn> Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn> Co-developed-by: Kun Jiang <jiang.kun2@zte.com.cn> Signed-off-by: Kun Jiang <jiang.kun2@zte.com.cn> Cc: Balbir Singh <bsingharora@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Fan Yu <fan.yu9@zte.com.cn> Cc: Peilin He <he.peilin@zte.com.cn> Cc: tuqiang <tu.qiang35@zte.com.cn> Cc: ye xingchen <ye.xingchen@zte.com.cn> Cc: Yunkai Zhang <zhang.yunkai@zte.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yafang Shao [Thu, 19 Dec 2024 02:34:52 +0000 (10:34 +0800)]
drivers: remove get_task_comm() and print task comm directly
Since task->comm is guaranteed to be NUL-terminated, we can print it
directly without the need to copy it into a separate buffer. This
simplifies the code and avoids unnecessary operations.
Link: https://lkml.kernel.org/r/20241219023452.69907-6-laoar.shao@gmail.com Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> (For tty) Reviewed-by: Lyude Paul <lyude@redhat.com> (For nouveau) Cc: Oded Gabbay <ogabbay@kernel.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tursulin@ursulin.net> Cc: David Airlie <airlied@gmail.com> Cc: Simona Vetter <simona@ffwll.ch> Cc: Karol Herbst <kherbst@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Danilo Krummrich <dakr@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: "André Almeida" <andrealmeid@igalia.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Darren Hart <dvhart@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Kalle Valo <kvalo@kernel.org> Cc: Kees Cook <kees@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Moore <paul@paul-moore.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vineet Gupta <vgupta@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yafang Shao [Thu, 19 Dec 2024 02:34:51 +0000 (10:34 +0800)]
security: remove get_task_comm() and print task comm directly
Since task->comm is guaranteed to be NUL-terminated, we can print it
directly without the need to copy it into a separate buffer. This
simplifies the code and avoids unnecessary operations.
Link: https://lkml.kernel.org/r/20241219023452.69907-5-laoar.shao@gmail.com Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Reviewed-by: Paul Moore <paul@paul-moore.com> Acked-by: Kees Cook <kees@kernel.org> Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: "André Almeida" <andrealmeid@igalia.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Danilo Krummrich <dakr@redhat.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: Karol Herbst <kherbst@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lyude Paul <lyude@redhat.com> Cc: Oded Gabbay <ogabbay@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Simona Vetter <simona@ffwll.ch> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tvrtko Ursulin <tursulin@ursulin.net> Cc: Vineet Gupta <vgupta@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yafang Shao [Thu, 19 Dec 2024 02:34:50 +0000 (10:34 +0800)]
net: remove get_task_comm() and print task comm directly
Since task->comm is guaranteed to be NUL-terminated, we can print it
directly without the need to copy it into a separate buffer. This
simplifies the code and avoids unnecessary operations.
Link: https://lkml.kernel.org/r/20241219023452.69907-4-laoar.shao@gmail.com Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: "André Almeida" <andrealmeid@igalia.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Danilo Krummrich <dakr@redhat.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: Karol Herbst <kherbst@redhat.com> Cc: Kees Cook <kees@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lyude Paul <lyude@redhat.com> Cc: Oded Gabbay <ogabbay@kernel.org> Cc: Paul Moore <paul@paul-moore.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Simona Vetter <simona@ffwll.ch> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tvrtko Ursulin <tursulin@ursulin.net> Cc: Vineet Gupta <vgupta@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yafang Shao [Thu, 19 Dec 2024 02:34:49 +0000 (10:34 +0800)]
arch: remove get_task_comm() and print task comm directly
Since task->comm is guaranteed to be NUL-terminated, we can print it
directly without the need to copy it into a separate buffer. This
simplifies the code and avoids unnecessary operations.
Link: https://lkml.kernel.org/r/20241219023452.69907-3-laoar.shao@gmail.com Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "André Almeida" <andrealmeid@igalia.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Danilo Krummrich <dakr@redhat.com> Cc: Darren Hart <dvhart@infradead.org> Cc: David Airlie <airlied@gmail.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: James Morris <jmorris@namei.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: Karol Herbst <kherbst@redhat.com> Cc: Kees Cook <kees@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lyude Paul <lyude@redhat.com> Cc: Oded Gabbay <ogabbay@kernel.org> Cc: Paul Moore <paul@paul-moore.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Simona Vetter <simona@ffwll.ch> Cc: Tvrtko Ursulin <tursulin@ursulin.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yafang Shao [Thu, 19 Dec 2024 02:34:48 +0000 (10:34 +0800)]
kernel: remove get_task_comm() and print task comm directly
Patch series "Remove get_task_comm() and print task comm directly", v2.
Since task->comm is guaranteed to be NUL-terminated, we can print it
directly without the need to copy it into a separate buffer. This
simplifies the code and avoids unnecessary operations.
This patch (of 5):
Since task->comm is guaranteed to be NUL-terminated, we can print it
directly without the need to copy it into a separate buffer. This
simplifies the code and avoids unnecessary operations.
Link: https://lkml.kernel.org/r/20241219023452.69907-1-laoar.shao@gmail.com Link: https://lkml.kernel.org/r/20241219023452.69907-2-laoar.shao@gmail.com Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Cc: Serge Hallyn <serge@hallyn.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Darren Hart <dvhart@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: "André Almeida" <andrealmeid@igalia.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Kalle Valo <kvalo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Danilo Krummrich <dakr@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: James Morris <jmorris@namei.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Kees Cook <kees@kernel.org> Cc: Lyude Paul <lyude@redhat.com> Cc: Oded Gabbay <ogabbay@kernel.org> Cc: Paul Moore <paul@paul-moore.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Simona Vetter <simona@ffwll.ch> Cc: Tvrtko Ursulin <tursulin@ursulin.net> Cc: Vineet Gupta <vgupta@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mark Tinguely [Thu, 5 Dec 2024 17:16:51 +0000 (17:16 +0000)]
ocfs2: support large folios in ocfs2_write_zero_page()
Remove assumptions that a folio is PAGE_SIZE.
Link: https://lkml.kernel.org/r/20241205171653.3179945-24-willy@infradead.org Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mark Tinguely [Thu, 5 Dec 2024 17:16:50 +0000 (17:16 +0000)]
ocfs2: support large folios in ocfs2_zero_cluster_folios()
Remove assumptions that a folio is one page in size.
Link: https://lkml.kernel.org/r/20241205171653.3179945-23-willy@infradead.org Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20241205171653.3179945-22-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Mark Tinguely <mark.tinguely@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Thu, 5 Dec 2024 17:16:48 +0000 (17:16 +0000)]
ocfs2: use a folio in ocfs2_fast_symlink_read_folio()
Use folio_end_read() instead of SetPageUptodate() and unlock_page(). Use
memcpy_to_folio() instead of open-coding a kmap_atomic() sequence.
Link: https://lkml.kernel.org/r/20241205171653.3179945-21-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Mark Tinguely <mark.tinguely@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Thu, 5 Dec 2024 17:16:47 +0000 (17:16 +0000)]
ocfs2: convert ocfs2_read_inline_data() to take a folio
All callers now have a folio, so pass it in. We can use folio_fill_tail()
instead of open-coding it. Saves a call to compound_head().
Link: https://lkml.kernel.org/r/20241205171653.3179945-20-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Mark Tinguely <mark.tinguely@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mark Tinguely [Thu, 5 Dec 2024 17:16:46 +0000 (17:16 +0000)]
ocfs2: convert ocfs2_map_and_dirty_page() to ocfs2_map_and_dirty_folio()
All callers now have a folio, so skip the folio->page->folio conversion.
Link: https://lkml.kernel.org/r/20241205171653.3179945-19-willy@infradead.org Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mark Tinguely [Thu, 5 Dec 2024 17:16:45 +0000 (17:16 +0000)]
ocfs2: convert ocfs2_duplicate_clusters_by_page() to use a folio
Retrieve folios from the page cache, not pages, and use a folio throughout
this function. Removes seven calls to compound_head().
Link: https://lkml.kernel.org/r/20241205171653.3179945-18-willy@infradead.org Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mark Tinguely [Thu, 5 Dec 2024 17:16:44 +0000 (17:16 +0000)]
ocfs2: use an array of folios instead of an array of pages
The ocfs2_zero_cluster_folios() / ocfs2_grab_folios() /
ocfs2_grab_eof_folios() family of functions pass around an array of pages.
Convert them to pass around an array of folios. This removes the last
caller of ocfs2_unlock_and_free_pages(), so delete it.
Link: https://lkml.kernel.org/r/20241205171653.3179945-17-willy@infradead.org Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mark Tinguely [Thu, 5 Dec 2024 17:16:43 +0000 (17:16 +0000)]
ocfs2: convert ocfs2_clear_page_regions() to ocfs2_clear_folio_regions()
Pass in and use the folio instead of its page.
Link: https://lkml.kernel.org/r/20241205171653.3179945-16-willy@infradead.org Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mark Tinguely [Thu, 5 Dec 2024 17:16:42 +0000 (17:16 +0000)]
ocfs2: convert ocfs2_map_page_blocks() to ocfs2_map_folio_blocks()
All callers now have a folio, so pass it in instead of converting
folio->page->folio.
Link: https://lkml.kernel.org/r/20241205171653.3179945-15-willy@infradead.org Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mark Tinguely [Thu, 5 Dec 2024 17:16:41 +0000 (17:16 +0000)]
ocfs2: use a folio in ocfs2_map_and_dirty_page()
Convert the incoming page to a folio and use it throughout the function.
Removes a couple of calls to compound_head().
Link: https://lkml.kernel.org/r/20241205171653.3179945-14-willy@infradead.org Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mark Tinguely [Thu, 5 Dec 2024 17:16:40 +0000 (17:16 +0000)]
ocfs2: use a folio in ocfs2_prepare_page_for_write()
Update to the new APIs. Removes a few page->folio conversions.
Link: https://lkml.kernel.org/r/20241205171653.3179945-13-willy@infradead.org Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mark Tinguely [Thu, 5 Dec 2024 17:16:39 +0000 (17:16 +0000)]
ocfs2: use a folio in ocfs2_write_end_nolock()
Remove an access to page->index. Remove some PAGE_SIZE assumptions.
Link: https://lkml.kernel.org/r/20241205171653.3179945-12-willy@infradead.org Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mark Tinguely [Thu, 5 Dec 2024 17:16:38 +0000 (17:16 +0000)]
ocfs2: convert ocfs2_write_failure() to use a folio
Remove the folio->page conversion and just use the folio.
Link: https://lkml.kernel.org/r/20241205171653.3179945-11-willy@infradead.org Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mark Tinguely [Thu, 5 Dec 2024 17:16:37 +0000 (17:16 +0000)]
ocfs2: convert w_pages to w_folios
Pass around an array of folios instead of an array of pages. Removes a
few calls to compound_head().
Link: https://lkml.kernel.org/r/20241205171653.3179945-10-willy@infradead.org Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mark Tinguely [Thu, 5 Dec 2024 17:16:36 +0000 (17:16 +0000)]
ocfs2: convert ocfs2_inode_lock_with_page() to ocfs2_inode_lock_with_folio()
Saves a hidden call to compound_head().
Link: https://lkml.kernel.org/r/20241205171653.3179945-9-willy@infradead.org Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mark Tinguely [Thu, 5 Dec 2024 17:16:35 +0000 (17:16 +0000)]
ocfs2: convert ocfs2_readpage_inline() to take a folio
Save a couple of calls to compound_head() by using a folio throughout this
function.
Link: https://lkml.kernel.org/r/20241205171653.3179945-8-willy@infradead.org Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Thu, 5 Dec 2024 17:16:34 +0000 (17:16 +0000)]
ocfs2: pass mmap_folio around instead of mmap_page
Saves a few hidden calls to compound_head() and accesses to page->mapping.
Link: https://lkml.kernel.org/r/20241205171653.3179945-7-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Mark Tinguely <mark.tinguely@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mark Tinguely [Thu, 5 Dec 2024 17:16:33 +0000 (17:16 +0000)]
ocfs2: use a folio in ocfs2_write_begin_inline()
Retrieve a folio from the page cache instead of a page and use that
folio throught the function. Saves a couple of calls to compound_head().
Link: https://lkml.kernel.org/r/20241205171653.3179945-6-willy@infradead.org Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mark Tinguely [Thu, 5 Dec 2024 17:16:32 +0000 (17:16 +0000)]
ocfs2: use a folio in ocfs2_zero_new_buffers()
Convert to the new APIs, saving at least one hidden call to
compound_head().
Link: https://lkml.kernel.org/r/20241205171653.3179945-5-willy@infradead.org Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mark Tinguely [Thu, 5 Dec 2024 17:16:31 +0000 (17:16 +0000)]
ocfs2: convert w_target_page to w_target_folio
Pass a folio around instead of a page. Saves a few hidden calls to
compound_head() and removes a call to kmap_atomic().
Link: https://lkml.kernel.org/r/20241205171653.3179945-4-willy@infradead.org Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Thu, 5 Dec 2024 17:16:30 +0000 (17:16 +0000)]
ocfs2: convert ocfs2_page_mkwrite() to use a folio
Pass the folio into __ocfs2_page_mkwrite() and use it throughout. Does
not attempt to support large folios.
Link: https://lkml.kernel.org/r/20241205171653.3179945-3-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Mark Tinguely <mark.tinguely@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Thu, 5 Dec 2024 17:16:29 +0000 (17:16 +0000)]
ocfs2: handle a symlink read error correctly
Patch series "Convert ocfs2 to use folios".
Mark did a conversion of ocfs2 to use folios and sent it to me as a
giant patch for review ;-)
So I've redone it as individual patches, and credited Mark for the patches
where his code is substantially the same. It's not a bad way to do it;
his patch had some bugs and my patches had some bugs. Hopefully all our
bugs were different from each other. And hopefully Mark likes all the
changes I made to his code!
This patch (of 23):
If we can't read the buffer, be sure to unlock the page before returning.
Link: https://lkml.kernel.org/r/20241205171653.3179945-1-willy@infradead.org Link: https://lkml.kernel.org/r/20241205171653.3179945-2-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: Mark Tinguely <mark.tinguely@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tamir Duberstein [Tue, 5 Nov 2024 12:03:42 +0000 (08:03 -0400)]
XArray: minor documentation improvements
- Replace "they" with "you" where "you" is used in the preceding
sentence fragment.
- Mention `xa_erase` in discussion of multi-index entries. Split this
into a separate sentence.
- Add "call" parentheses on "xa_store" for consistency and
linkification.
- Add caveat that `xa_store` and `xa_erase` are not equivalent in the
presence of `XA_FLAGS_ALLOC`.
Link: https://lkml.kernel.org/r/20241105-xarray-documentation-v5-1-8e1702321b41@gmail.com Signed-off-by: Tamir Duberstein <tamird@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Daniel Yang [Fri, 15 Nov 2024 08:00:17 +0000 (00:00 -0800)]
ocfs2: replace deprecated simple_strtol with kstrtol
simple_strtol() ignores overflows and has an awkward interface for error
checking. Replace with the recommended kstrtol function leads to clearer
error checking and safer conversions.
Link: https://lkml.kernel.org/r/20241115080018.5372-1-danielyangkang@gmail.com Signed-off-by: Daniel Yang <danielyangkang@gmail.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dmitry Antipov [Fri, 15 Nov 2024 15:10:13 +0000 (18:10 +0300)]
ocfs2: miscellaneous spelling fixes
Correct spelling here and there as suggested by codespell.
Link: https://lkml.kernel.org/r/20241115151013.1404929-1-dmantipov@yandex.ru Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Daniel Yang [Sun, 17 Nov 2024 21:52:18 +0000 (13:52 -0800)]
ocfs2: heartbeat: replace simple_strtoul with kstrtoul
simple_strtoul() is deprecated due to ignoring overflows and also requires
clunkier error checking. Replacing with kstrtoul() leads to safer code
and cleaner error checking.
Link: https://lkml.kernel.org/r/20241117215219.4012-1-danielyangkang@gmail.com Signed-off-by: Daniel Yang <danielyangkang@gmail.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mateusz Guzik [Tue, 19 Nov 2024 14:35:26 +0000 (15:35 +0100)]
get_task_exe_file: check PF_KTHREAD locklessly
Same thing as 8ac5dc66599c ("get_task_mm: check PF_KTHREAD lockless")
Nowadays PF_KTHREAD is sticky and it was never protected by ->alloc_lock.
Move the PF_KTHREAD check outside of task_lock() section to make this code
more understandable.
Yunhui Cui [Tue, 10 Dec 2024 09:52:38 +0000 (17:52 +0800)]
watchdog: output this_cpu when printing hard LOCKUP
When printing "Watchdog detected hard LOCKUP on cpu", also output the
detecting CPU. It's more intuitive.
Link: https://lkml.kernel.org/r/20241210095238.63444-1-cuiyunhui@bytedance.com Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Cc: Bitao Hu <yaoma@linux.alibaba.com> Cc: Joel Granados <joel.granados@kernel.org> Cc: John Ogness <john.ogness@linutronix.de> Cc: Liu Song <liusong@linux.alibaba.com> Cc: Song Liu <song@kernel.org> Cc: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Easwar Hariharan [Tue, 10 Dec 2024 22:02:50 +0000 (22:02 +0000)]
ALSA: line6: convert timeouts to secs_to_jiffies()
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
Easwar Hariharan [Tue, 10 Dec 2024 22:02:49 +0000 (22:02 +0000)]
livepatch: convert timeouts to secs_to_jiffies()
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
Easwar Hariharan [Tue, 10 Dec 2024 22:02:48 +0000 (22:02 +0000)]
ceph: convert timeouts to secs_to_jiffies()
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
Easwar Hariharan [Tue, 10 Dec 2024 22:02:47 +0000 (22:02 +0000)]
staging: vc04_services: convert timeouts to secs_to_jiffies()
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
Easwar Hariharan [Tue, 10 Dec 2024 22:02:46 +0000 (22:02 +0000)]
bluetooth: mgmt: convert timeouts to secs_to_jiffies()
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
Easwar Hariharan [Tue, 10 Dec 2024 22:02:45 +0000 (22:02 +0000)]
wifi: ath11k: convert timeouts to secs_to_jiffies()
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
Easwar Hariharan [Tue, 10 Dec 2024 22:02:43 +0000 (22:02 +0000)]
xen/blkback: convert timeouts to secs_to_jiffies()
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
Easwar Hariharan [Tue, 10 Dec 2024 22:02:42 +0000 (22:02 +0000)]
scsi: pm8001: convert timeouts to secs_to_jiffies()
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
Easwar Hariharan [Tue, 10 Dec 2024 22:02:41 +0000 (22:02 +0000)]
scsi: arcmsr: convert timeouts to secs_to_jiffies()
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
Easwar Hariharan [Tue, 10 Dec 2024 22:02:40 +0000 (22:02 +0000)]
scsi: lpfc: convert timeouts to secs_to_jiffies()
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
Easwar Hariharan [Tue, 10 Dec 2024 22:02:39 +0000 (22:02 +0000)]
drm/xe: convert timeout to secs_to_jiffies()
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
Easwar Hariharan [Tue, 10 Dec 2024 22:02:38 +0000 (22:02 +0000)]
accel/habanalabs: convert timeouts to secs_to_jiffies()
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
Easwar Hariharan [Tue, 10 Dec 2024 22:02:37 +0000 (22:02 +0000)]
mm: kmemleak: convert timeouts to secs_to_jiffies()
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
Easwar Hariharan [Tue, 10 Dec 2024 22:02:36 +0000 (22:02 +0000)]
powerpc/papr_scm: convert timeouts to secs_to_jiffies()
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
Easwar Hariharan [Tue, 10 Dec 2024 22:02:35 +0000 (22:02 +0000)]
s390: kernel: convert timeouts to use secs_to_jiffies()
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the values here are a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
Easwar Hariharan [Tue, 10 Dec 2024 22:02:34 +0000 (22:02 +0000)]
arm: pxa: convert timeouts to use secs_to_jiffies()
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
Easwar Hariharan [Tue, 10 Dec 2024 22:02:33 +0000 (22:02 +0000)]
coccinelle: misc: add secs_to_jiffies script
This script finds and suggests conversions of timeout patterns that result
in seconds-denominated timeouts to use the new secs_to_jiffies() API in
include/linux/jiffies.h for better readability.
Link: https://lkml.kernel.org/r/20241210-converge-secs-to-jiffies-v3-2-ddfefd7e9f2a@linux.microsoft.com Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com> Suggested-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andrew Lunn <andrew+netdev@lunn.ch> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Daniel Mack <daniel@zonque.org> Cc: David Airlie <airlied@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dick Kennedy <dick.kennedy@broadcom.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Florian Fainelli <florian.fainelli@broadcom.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: James Smart <james.smart@broadcom.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Jeff Johnson <jjohnson@kernel.org> Cc: Jeff Johnson <quic_jjohnson@quicinc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jeroen de Borst <jeroendb@google.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Josh Poimboeuf <jpoimboe@kernel.org> Cc: Jozsef Kadlecsik <kadlec@netfilter.org> Cc: Julia Lawall <julia.lawall@inria.fr> Cc: Kalle Valo <kvalo@kernel.org> Cc: Louis Peens <louis.peens@corigine.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Naveen N Rao <naveen@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Nicolas Palix <nicolas.palix@imag.fr> Cc: Oded Gabbay <ogabbay@kernel.org> Cc: Ofir Bitton <obitton@habana.ai> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Praveen Kaligineedi <pkaligineedi@google.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Roger Pau Monné <roger.pau@citrix.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Scott Branden <sbranden@broadcom.com> Cc: Shailend Chand <shailend@google.com> Cc: Simona Vetter <simona@ffwll.ch> Cc: Simon Horman <horms@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Takashi Iwai <tiwai@suse.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Xiubo Li <xiubli@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Easwar Hariharan [Tue, 10 Dec 2024 22:02:32 +0000 (22:02 +0000)]
netfilter: conntrack: cleanup timeout definitions
Patch series "Converge on using secs_to_jiffies()", v3.
This is a series that follows up on my previous series to introduce
secs_to_jiffies() and convert a few initial users.[1] In the review for
that series, Anna-Maria requested converting other users with Coccinelle.
[2] This is part 1 that converts users of msecs_to_jiffies() that use the
multiply pattern of either of:
- msecs_to_jiffies(N*1000), or
- msecs_to_jiffies(N*MSEC_PER_SEC)
where N is a constant, to avoid the multiplication.
The entire conversion is made with Coccinelle in the script added in
patch 2. Some changes suggested by Coccinelle have been deferred to
later parts that will address other possible variant patterns.
None of the higher order definitions are used anymore, so remove
definitions for minutes, hours, and days timeouts. Convert the seconds
denominated timeouts to secs_to_jiffies()
Link: https://lkml.kernel.org/r/20241210-converge-secs-to-jiffies-v3-0-ddfefd7e9f2a@linux.microsoft.com Link: https://lkml.kernel.org/r/20241210-converge-secs-to-jiffies-v3-1-ddfefd7e9f2a@linux.microsoft.com Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andrew Lunn <andrew+netdev@lunn.ch> Cc: Anna-Maria Behnsen <anna-maria@linutronix.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Daniel Mack <daniel@zonque.org> Cc: David Airlie <airlied@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dick Kennedy <dick.kennedy@broadcom.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Florian Fainelli <florian.fainelli@broadcom.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: James Smart <james.smart@broadcom.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Jeff Johnson <jjohnson@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jeroen de Borst <jeroendb@google.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Johan Hedberg <johan.hedberg@gmail.com>: Cc: Josh Poimboeuf <jpoimboe@kernel.org> Cc: Jozsef Kadlecsik <kadlec@netfilter.org> Cc: Julia Lawall <julia.lawall@inria.fr> Cc: Kalle Valo <kvalo@kernel.org> Cc: Louis Peens <louis.peens@corigine.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Marcel Holtmann <marcel@holtmann.org>: Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Naveen N Rao <naveen@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Nicolas Palix <nicolas.palix@imag.fr> Cc: Oded Gabbay <ogabbay@kernel.org> Cc: Ofir Bitton <obitton@habana.ai> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Praveen Kaligineedi <pkaligineedi@google.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Roger Pau Monné <roger.pau@citrix.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Scott Branden <sbranden@broadcom.com> Cc: Shailend Chand <shailend@google.com> Cc: Simona Vetter <simona@ffwll.ch> Cc: Simon Horman <horms@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Takashi Iwai <tiwai@suse.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Xiubo Li <xiubli@redhat.com> Cc: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Akinobu Mita [Sun, 8 Dec 2024 14:24:15 +0000 (23:24 +0900)]
fault-inject: use prandom where cryptographically secure randomness is not needed
Currently get_random*() is used to determine the probability of fault
injection, but cryptographically secure random numbers are not required.
There is no big problem in using prandom instead of get_random*() to
determine the probability of fault injection, and it also avoids acquiring
a spinlock, which is unsafe in some contexts.
Tamir Duberstein [Wed, 4 Dec 2024 18:41:06 +0000 (13:41 -0500)]
checkpatch: check return of `git_commit_info`
Avoid string concatenation with an undefined variable when a reference to
a missing commit is contained in a `Fixes` tag.
Given this patch:
: From: Tamir Duberstein <tamird@gmail.com>
: Subject: Test patch
: Date: Fri, 25 Oct 2024 19:30:51 -0400
:
: This is a test patch.
:
: Fixes: deadbeef111
: Signed-off-by: Tamir Duberstein <tamird@gmail.com>
: --- /dev/null
: +++ b/new-file
: @@ -0,0 +1 @@
: +Test.
Before:
WARNING: Please use correct Fixes: style 'Fixes: <12 chars of sha1> ("<title line>")' - ie: 'Fixes: ("commit title")'
WARNING: Unknown commit id 'deadbeef111', maybe rebased or not pulled?
Use of uninitialized value $cid in concatenation (.) or string at scripts/checkpatch.pl line 3242.
After:
WARNING: Unknown commit id 'deadbeef111', maybe rebased or not pulled?
MengEn Sun [Fri, 6 Dec 2024 04:13:47 +0000 (12:13 +0800)]
ucounts: move kfree() out of critical zone protected by ucounts_lock
Although kfree is a non-sleep function, it is possible to enter a long
chain of calls probabilistically, so it looks better to move kfree from
alloc_ucounts() out of the critical zone of ucounts_lock.
Link: https://lkml.kernel.org/r/1733458427-11794-1-git-send-email-mengensun@tencent.com Signed-off-by: MengEn Sun <mengensun@tencent.com> Reviewed-by: YueHong Wu <yuehongwu@tencent.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andrei Vagin <avagin@google.com> Cc: Joel Granados <joel.granados@kernel.org> Cc: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tamir Duberstein [Thu, 5 Dec 2024 15:11:26 +0000 (10:11 -0500)]
xarray: port tests to kunit
Minimally rewrite the XArray unit tests to use kunit. This integrates
nicely with existing kunit tools which produce nicer human-readable output
compared to the existing machinery.
Running the xarray tests before this change requires an obscure
invocation
Wang Yaxin [Tue, 3 Dec 2024 08:48:48 +0000 (16:48 +0800)]
delayacct: add delay max to record delay peak
Introduce the use cases of delay max, which can help quickly detect
potential abnormal delays in the system and record the types and specific
details of delay spikes.
Problem
========
Delay accounting can track the average delay of processes to show
system workload. However, when a process experiences a significant
delay, maybe a delay spike, which adversely affects performance,
getdelays can only display the average system delay over a period
of time. Yet, average delay is unhelpful for diagnosing delay peak.
It is not even possible to determine which type of delay has spiked,
as this information might be masked by the average delay.
Solution
=========
the 'delay max' can display delay peak since the system's startup,
which can record potential abnormal delays over time, including
the type of delay and the maximum delay. This is helpful for
quickly identifying crash caused by delay.
Use case
=========
bash# ./getdelays -d -p 244
print delayacct stats ON
PID 244
CPU count real total virtual total delay total delay average delay max
68 192000000213676651 705643 0.010ms 0.306381ms
IO count delay total delay average delay max
0 0 0.000ms 0.000000ms
SWAP count delay total delay average delay max
0 0 0.000ms 0.000000ms
RECLAIM count delay total delay average delay max
0 0 0.000ms 0.000000ms
THRASHING count delay total delay average delay max
0 0 0.000ms 0.000000ms
COMPACT count delay total delay average delay max
0 0 0.000ms 0.000000ms
WPCOPY count delay total delay average delay max
235 15648284 0.067ms 0.263842ms
IRQ count delay total delay average delay max
0 0 0.000ms 0.000000ms
[wang.yaxin@zte.com.cn: update docs and fix some spelling errors] Link: https://lkml.kernel.org/r/20241213192700771XKZ8H30OtHSeziGqRVMs0@zte.com.cn Link: https://lkml.kernel.org/r/20241203164848805CS62CQPQWG9GLdQj2_BxS@zte.com.cn Co-developed-by: Wang Yong <wang.yong12@zte.com.cn> Signed-off-by: Wang Yong <wang.yong12@zte.com.cn> Co-developed-by: xu xin <xu.xin16@zte.com.cn> Signed-off-by: xu xin <xu.xin16@zte.com.cn> Co-developed-by: Wang Yaxin <wang.yaxin@zte.com.cn> Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn> Signed-off-by: Kun Jiang <jiang.kun2@zte.com.cn> Cc: Balbir Singh <bsingharora@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Fan Yu <fan.yu9@zte.com.cn> Cc: Peilin He <he.peilin@zte.com.cn> Cc: tuqiang <tu.qiang35@zte.com.cn> Cc: Yang Yang <yang.yang29@zte.com.cn> Cc: ye xingchen <ye.xingchen@zte.com.cn> Cc: Yunkai Zhang <zhang.yunkai@zte.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zijun Hu [Thu, 17 Oct 2024 15:34:49 +0000 (23:34 +0800)]
kernel/resource: simplify API __devm_release_region() implementation
Simplify __devm_release_region() implementation by dedicated API
devres_release() which have below advantages than current
__release_region() + devres_destroy():
It is simpler if __devm_release_region() is undoing what
__devm_request_region() did, otherwise, it can avoid wrong and undesired
__release_region().
Link: https://lkml.kernel.org/r/20241017-release_region_fix-v1-1-84a3e8441284@quicinc.com Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tamir Duberstein [Tue, 12 Nov 2024 19:25:37 +0000 (14:25 -0500)]
xarray: extract helper from __xa_{insert,cmpxchg}
Reduce code duplication by extracting a static inline function. This
function is identical to __xa_cmpxchg with the exception that it does not
coerce zero entries to null on the return path.
Tamir Duberstein [Tue, 12 Nov 2024 19:25:36 +0000 (14:25 -0500)]
xarray: extract xa_zero_to_null
Patch series "xarray: extract __xa_cmpxchg_raw".
This series reduces duplication between __xa_cmpxchg and __xa_insert by
extracting a new function that does not coerce zero entries to null on the
return path.
The new function may be used by the upcoming Rust xarray abstraction in
its reservation API where it is useful to tell the difference between zero
entries and null slots.
This patch (of 2):
Reduce code duplication by extracting a static inline function that
returns its argument if it is non-zero and NULL otherwise.
This changes xas_result to check for errors before checking for zero but
this cannot change the behavior of existing callers:
- __xa_erase: passes the result of xas_store(_, NULL) which cannot fail.
- __xa_store: passes the result of xas_store(_, entry) which may fail.
xas_store calls xas_create when entry is not NULL which returns NULL
on error, which is immediately checked. This should not change
observable behavior.
- __xa_cmpxchg: passes the result of xas_load(_) which might be zero.
This would previously return NULL regardless of the outcome of
xas_store but xas_store cannot fail if xas_load returns zero
because there is no need to allocate memory.
- xa_store_range: same as __xa_erase.
Kuan-Wei Chiu [Fri, 29 Nov 2024 18:12:22 +0000 (02:12 +0800)]
Documentation/core-api: min_heap: add author information
As with other documentation files, author information is added to
min_heap.rst, providing contact details for any questions regarding the
Min Heap API or the document itself.
Kuan-Wei Chiu [Fri, 29 Nov 2024 18:12:21 +0000 (02:12 +0800)]
lib min_heap: add brief introduction to Min Heap API
A short description of the Min Heap API is added to the min_heap.h,
explaining its purpose for managing min-heaps and emphasizing the use of
macro wrappers instead of direct function calls. For more details, users
are directed to the documentation at Documentation/core-api/min_heap.rst.
Kuan-Wei Chiu [Fri, 29 Nov 2024 18:12:20 +0000 (02:12 +0800)]
lib/test_min_heap: use inline min heap variants to reduce attack vector
To address concerns about increasing the attack vector, remove the select
MIN_HEAP dependency from TEST_MIN_HEAP in Kconfig.debug.
Additionally, all min heap test function calls in lib/test_min_heap.c are
replaced with their inline variants. By exclusively using inline
variants, we eliminate the need to enable CONFIG_MIN_HEAP for testing
purposes.
Kuan-Wei Chiu [Fri, 29 Nov 2024 18:12:19 +0000 (02:12 +0800)]
lib min_heap: improve type safety in min_heap macros by using container_of
Patch series "lib min_heap: Improve min_heap safety, testing, and
documentation".
Improve the min heap implementation by enhancing type safety with
container_of, reducing the attack vector by replacing test function calls
with inline variants, and adding a brief API introduction in min_heap.h.
It also includes author information in
Documentation/core-api/min_heap.rst.
This patch (of 4):
The current implementation of min_heap macros uses explicit casting to
min_heap_char *, which prevents the compiler from detecting incorrect
pointer types. This can lead to errors if non-min_heap pointers are
passed inadvertently.
To enhance safety, replace all explicit casts to min_heap_char * with the
use of container_of(&(_heap)->nr, min_heap_char, nr). This approach
ensures that the _heap parameter is indeed a min_heap_char-compatible
structure, allowing the compiler to catch improper usages.
projects / users / jedix / linux-maple.git / log