Ovidiu Panait [Fri, 28 May 2021 10:37:55 +0000 (13:37 +0300)]
selftests/bpf: add selftest part of "bpf: improve verifier branch analysis"
Backport the missing selftest part of commit 7da6cd690c43 ("bpf: improve
verifier branch analysis") in order to fix the following test_verifier
failures:
Fix up test_verifier error messages for the case where the original error
message changed, or for the case where pointer alu errors differ between
privileged and unprivileged tests. Also, add alternative tests for keeping
coverage of the original verifier rejection error message (fp alu), and
newly reject map_ptr += rX where rX == 0 given we now forbid alu on these
types for unprivileged. All test_verifier cases pass after the change. The
test case fixups were kept separate to ease backporting of core changes.
Signed-off-by: Piotr Krysiuk <piotras@gmail.com> Co-developed-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org>
[OP: backport to 4.19, skipping non-existent tests] Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ovidiu Panait [Fri, 28 May 2021 10:37:52 +0000 (13:37 +0300)]
bpf: fix up selftests after backports were fixed
After the backport of the changes to fix CVE 2019-7308, the
selftests also need to be fixed up, as was done originally
in mainline 80c9b2fae87b ("bpf: add various test cases to selftests").
This is a backport of upstream commit 80c9b2fae87b ("bpf: add various test
cases to selftests") adapted to 4.19 in order to fix the
selftests that began to fail after CVE-2019-7308 fixes.
Suggested-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usb3_start_pipen() is called by renesas_usb3_ep_queue() and
usb3_request_done_pipen() so that usb3_start_pipen() is possible
to cause a race when getting usb3_first_req like below:
renesas_usb3_ep_queue()
spin_lock_irqsave()
list_add_tail()
spin_unlock_irqrestore()
usb3_start_pipen()
usb3_first_req = usb3_get_request() --- [1]
--- interrupt ---
usb3_irq_dma_int()
usb3_request_done_pipen()
usb3_get_request()
usb3_start_pipen()
usb3_first_req = usb3_get_request()
...
(the req is possible to be finished in the interrupt)
The usb3_first_req [1] above may have been finished after the interrupt
ended so that this driver caused to start a transfer wrongly. To fix this
issue, getting/checking the usb3_first_req are under spin_lock_irqsave()
in the same section.
The driver incorrectly uses req->num_pending_sgs to track both the
number of pending and queued SG entries. It only prepares the next
request if the previous is done, and it doesn't update num_pending_sgs
until there is TRB completion interrupt. This may starve the controller
of more TRBs until the num_pending_sgs is decremented.
Fix this by decrementing the num_pending_sgs after they are queued and
properly track both num_mapped_sgs and num_queued_sgs.
Fixes: c96e6725db9d ("usb: dwc3: gadget: Correct the logic for queuing sgs") Cc: <stable@vger.kernel.org> Reported-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Tested-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/ba24591dbcaad8f244a3e88bd449bb7205a5aec3.1620874069.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In 'rp2_probe', the driver registers 'rp2_uart_interrupt' then calls
'rp2_fw_cb' through 'request_firmware_nowait'. In 'rp2_fw_cb', if the
firmware don't exists, function just return without initializing ports
of 'rp2_card'. But now the interrupt handler function has been
registered, and when an interrupt comes, 'rp2_uart_interrupt' may access
those ports then causing NULL pointer dereference or other bugs.
Because the driver does some initialization work in 'rp2_fw_cb', in
order to make the driver ready to handle interrupts, 'request_firmware'
should be used instead of asynchronous 'request_firmware_nowait'.
The Receive FIFO Data Count Trigger field (RTRG[6:0]) in the Receive
FIFO Data Count Trigger Register (HSRTRGR) of HSCIF can only hold values
ranging from 0-127. As the FIFO size is equal to 128 on HSCIF, the user
can write an out-of-range value, touching reserved bits.
Fix this by limiting the trigger value to the FIFO size minus one.
Reverse the order of the checks, to avoid rx_trig becoming zero if the
FIFO size is one.
Note that this change has no impact on other SCIF variants, as their
maximum supported trigger value is lower than the FIFO size anyway, and
the code below takes care of enforcing these limits.
Syzbot found that the kernel generates a WARNing if the user tries to
submit a bulk transfer through usbfs with a buffer that is way too
large. This isn't a bug in the kernel; it's merely an invalid request
from the user and the usbfs code does handle it correctly.
In theory the same thing can happen with async transfers, or with the
packet descriptor table for isochronous transfers.
To prevent the MM subsystem from complaining about these bad
allocation requests, add the __GFP_NOWARN flag to the kmalloc calls
for these buffers.
CC: Andrew Morton <akpm@linux-foundation.org> CC: <stable@vger.kernel.org> Reported-and-tested-by: syzbot+882a85c0c8ec4a3e2281@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20210518201835.GA1140918@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the set-speed request which erroneously used USB_DIR_IN and update
the default timeout argument to match (same value).
AD7745 devices don't have the CIN2 pins and therefore can't handle related
channels. Forcing the number of AD7746 channels may lead to enabling more
channels than what the hardware actually supports.
Avoid num_channels being overwritten after first assignment.
Signed-off-by: Lucas Stankus <lucas.p.stankus@gmail.com> Fixes: 83e416f458d53 ("staging: iio: adc: Replace, rewrite ad7745 from scratch.") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A rx flow control waiting in the control queue may block autosuspend.
Re-request autosuspend after flow control been sent to unblock
the transition to the low power state.
Up to 64 bytes of data can be read from NVM in one go. Read address
must be dword aligned. Data is read into a local buffer.
If caller asks to read data starting at an unaligned address then full
dword is anyway read from NVM into a local buffer. Data is then copied
from the local buffer starting at the unaligned offset to the caller
buffer.
In cases where asked data length + unaligned offset is over 64 bytes
we need to make sure we don't read past the 64 bytes in the local
buffer when copying to caller buffer, and make sure that we don't
skip copying unaligned offset bytes from local buffer anymore after
the first round of 64 byte NVM data read.
Fixes: 3e13676862f9 ("thunderbolt: Add support for DMA configuration based mailbox") Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
40cc3a80bb42 ("kgdb: fix gcc-11 warning on indentation") tried to fix up
the gcc-11 complaints in this file by just reformatting the #defines.
That worked for gcc 11.1.0, but in gcc 11.1.1 as shipped by Fedora 34,
the warning came back for one of the #defines.
Fix this up again by putting { } around the if statement, now it is
quiet again.
Fixes: 40cc3a80bb42 ("kgdb: fix gcc-11 warning on indentation") Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Link: https://lore.kernel.org/r/20210520130839.51987-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If an origin target has no snapshots, o->split_boundary is set to 0.
This causes BUG_ON(sectors <= 0) in block/bio.c:bio_split().
Fix this by initializing chunk_size, and in turn split_boundary, to
rounddown_pow_of_two(UINT_MAX) -- the largest power of two that fits
into "unsigned" type.
In certain scenarios a normal MSDU can be received as an A-MSDU when
the A-MSDU present bit of a QoS header gets flipped during reception.
Since this bit is unauthenticated, the hardware crypto engine can pass
the frame to the driver without any error indication.
This could result in processing unintended subframes collected in the
A-MSDU list. Hence, validate A-MSDU list by checking if the first frame
has a valid subframe header.
Comparing the non-aggregated MSDU and an A-MSDU, the fields of the first
subframe DA matches the LLC/SNAP header fields of a normal MSDU.
In order to avoid processing such frames, add a validation to
filter such A-MSDU frames where the first subframe header DA matches
with the LLC/SNAP header pattern.
For some chips/drivers, e.g., QCA6174 with ath10k, the decryption is
done by the hardware, and the Protected bit in the Frame Control field
is cleared in the lower level driver before the frame is passed to
mac80211. In such cases, the condition for ieee80211_has_protected() is
not met in ieee80211_rx_h_defragment() of mac80211 and the new security
validation steps are not executed.
Extend mac80211 to cover the case where the Protected bit has been
cleared, but the frame is indicated as having been decrypted by the
hardware. This extends protection against mixed key and fragment cache
attack for additional drivers/chips. This fixes CVE-2020-24586 and
CVE-2020-24587 for such cases.
EAPOL frames are used for authentication and key management between the
AP and each individual STA associated in the BSS. Those frames are not
supposed to be sent by one associated STA to another associated STA
(either unicast for broadcast/multicast).
Similarly, in 802.11 they're supposed to be sent to the authenticator
(AP) address.
Since it is possible for unexpected EAPOL frames to result in misbehavior
in supplicant implementations, it is better for the AP to not allow such
cases to be forwarded to other clients either directly, or indirectly if
the AP interface is part of a bridge.
Accept EAPOL (control port) frames only if they're transmitted to the
own address, or, due to interoperability concerns, to the PAE group
address.
Disable forwarding of EAPOL (or well, the configured control port
protocol) frames back to wireless medium in all cases. Previously, these
frames were accepted from fully authenticated and authorized stations
and also from unauthenticated stations for one of the cases.
Additionally, to avoid forwarding by the bridge, rewrite the PAE group
address case to the local MAC address.
Similar to the issues fixed in previous patches, TKIP and WEP
should be protected even if for TKIP we have the Michael MIC
protecting it, and WEP is broken anyway.
However, this also somewhat protects potential other algorithms
that drivers might implement.
As pointed out by Mathy Vanhoef, we implement the RX PN check
on fragmented frames incorrectly - we check against the last
received PN prior to the new frame, rather than to the one in
this frame itself.
Prior patches addressed the security issue here, but in order
to be able to reason better about the code, fix it to really
compare against the current frame's PN, not the last stored
one.
Prior patches protected against fragmentation cache attacks
by coloring keys, but this shows that it can lead to issues
when multiple stations use the same sequence number. Add a
fragment cache to struct sta_info (in addition to the one in
the interface) to separate fragments for different stations
properly.
This then automatically clear most of the fragment cache when a
station disconnects (or reassociates) from an AP, or when client
interfaces disconnect from the network, etc.
On the way, also fix the comment there since this brings us in line
with the recommendation in 802.11-2016 ("An AP should support ...").
Additionally, remove a useless condition (since there's no problem
purging an already empty list).
With old ciphers (WEP and TKIP) we shouldn't be using A-MSDUs
since A-MSDUs are only supported if we know that they are, and
the only practical way for that is HT support which doesn't
support old ciphers.
However, we would normally accept them anyway. Since we check
the MMIC before deaggregating A-MSDUs, and the A-MSDU bit in
the QoS header is not protected in TKIP (or WEP), this enables
attacks similar to CVE-2020-24588. To prevent that, drop A-MSDUs
completely with old ciphers.
Mitigate A-MSDU injection attacks (CVE-2020-24588) by detecting if the
destination address of a subframe equals an RFC1042 (i.e., LLC/SNAP)
header, and if so dropping the complete A-MSDU frame. This mitigates
known attacks, although new (unknown) aggregation-based attacks may
remain possible.
This defense works because in A-MSDU aggregation injection attacks, a
normal encrypted Wi-Fi frame is turned into an A-MSDU frame. This means
the first 6 bytes of the first A-MSDU subframe correspond to an RFC1042
header. In other words, the destination MAC address of the first A-MSDU
subframe contains the start of an RFC1042 header during an aggregation
attack. We can detect this and thereby prevent this specific attack.
For details, see Section 7.2 of "Fragment and Forge: Breaking Wi-Fi
Through Frame Aggregation and Fragmentation".
Note that for kernel 4.9 and above this patch depends on "mac80211:
properly handle A-MSDUs that start with a rfc1042 header". Otherwise
this patch has no impact and attacks will remain possible.
Properly parse A-MSDUs whose first 6 bytes happen to equal a rfc1042
header. This can occur in practice when the destination MAC address
equals AA:AA:03:00:00:00. More importantly, this simplifies the next
patch to mitigate A-MSDU injection attacks.
Simultaneously prevent mixed key attacks (CVE-2020-24587) and fragment
cache attacks (CVE-2020-24586). This is accomplished by assigning a
unique color to every key (per interface) and using this to track which
key was used to decrypt a fragment. When reassembling frames, it is
now checked whether all fragments were decrypted using the same key.
To assure that fragment cache attacks are also prevented, the ID that is
assigned to keys is unique even over (re)associations and (re)connects.
This means fragments separated by a (re)association or (re)connect will
not be reassembled. Because mac80211 now also prevents the reassembly of
mixed encrypted and plaintext fragments, all cache attacks are prevented.
Do not mix plaintext and encrypted fragments in protected Wi-Fi
networks. This fixes CVE-2020-26147.
Previously, an attacker was able to first forward a legitimate encrypted
fragment towards a victim, followed by a plaintext fragment. The
encrypted and plaintext fragment would then be reassembled. For further
details see Section 6.3 and Appendix D in the paper "Fragment and Forge:
Breaking Wi-Fi Through Frame Aggregation and Fragmentation".
Because of this change there are now two equivalent conditions in the
code to determine if a received fragment requires sequential PNs, so we
also move this test to a separate function to make the code easier to
maintain.
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the tiocmset and rfkill requests which erroneously used
usb_rcvctrlpipe().
Fixes: 72dc1c096c70 ("HSO: add option hso driver") Cc: stable@vger.kernel.org # 2.6.27 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix another "confused deputy" weakness[1]. Writes to /proc/$pid/attr/
files need to check the opener credentials, since these fds do not
transition state across execve(). Without this, it is possible to
trick another process (which may have different credentials) to write
to its own /proc/$pid/attr/ files, leading to unexpected and possibly
exploitable behaviors.
When adding support for power events, some handling of FUP packets was
unified. That resulted in breaking reporting of TSX aborts, by not
considering the associated TIP packet. Fix that.
Example:
A machine that supports TSX is required. It will have flag "rtm". Kernel
parameter tsx=on may be required.
# for w in `cat /proc/cpuinfo | grep -m1 flags `;do echo $w | grep rtm ; done
rtm
Test program:
#include <stdio.h>
#include <immintrin.h>
int main()
{
int x = 0;
if (_xbegin() == _XBEGIN_STARTED) {
x = 1;
_xabort(1);
} else {
printf("x = %d\n", x);
}
return 0;
}
Compile with -mrtm i.e.
gcc -Wall -Wextra -mrtm xabort.c -o xabort
Record:
perf record -e intel_pt/cyc/u --filter 'filter main @ ./xabort' ./xabort
The decoder reports the current instruction if it was decoded. In some
cases the current instruction is not decoded, in which case the instruction
bytes length must be set to zero. Ensure that is always done.
Note perf script can anyway get the instruction bytes for any samples where
they are not present.
Also note, that there is a redundant "ptq->insn_len = 0" statement which is
not removed until a subsequent patch in order to make this patch apply
cleanly to stable branches.
Example:
A machne that supports TSX is required. It will have flag "rtm". Kernel
parameter tsx=on may be required.
# for w in `cat /proc/cpuinfo | grep -m1 flags `;do echo $w | grep rtm ; done
rtm
Test program:
#include <stdio.h>
#include <immintrin.h>
int main()
{
int x = 0;
if (_xbegin() == _XBEGIN_STARTED) {
x = 1;
_xabort(1);
} else {
printf("x = %d\n", x);
}
return 0;
}
Compile with -mrtm i.e.
gcc -Wall -Wextra -mrtm xabort.c -o xabort
Record:
perf record -e intel_pt/cyc/u --filter 'filter main @ ./xabort' ./xabort
Commit de144ff4234f changes _pnfs_return_layout() to call
pnfs_mark_matching_lsegs_return() passing NULL as the struct
pnfs_layout_range argument. Unfortunately,
pnfs_mark_matching_lsegs_return() doesn't check if we have a value here
before dereferencing it, causing an oops.
I'm able to hit this crash consistently when running connectathon basic
tests on NFS v4.1/v4.2 against Ontap.
Fixes: de144ff4234f ("NFSv4: Don't discard segments marked for return in _pnfs_return_layout()") Cc: stable@vger.kernel.org Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: syzbot+19bcfc64a8df1318d1c3@syzkaller.appspotmail.com Fixes: 11f54f228643 ("NFC: nci: Add HCI over NCI protocol support") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 72704f876f50 ("dwc3: gadget: Implement the suspend entry event
handler") introduced (nearly 5 years ago!) an interrupt handler for
U3/L1-L2 suspend events. The problem is that these events aren't
currently enabled in the DEVTEN register so the handler is never
even invoked. Fix this simply by enabling the corresponding bit
in dwc3_gadget_enable_irq() using the same revision check as found
in the handler.
Fixes: 72704f876f50 ("dwc3: gadget: Implement the suspend entry event handler") Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Jack Pham <jackp@codeaurora.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210428090111.3370-1-jackp@codeaurora.org
[jackp@codeaurora.org: backport to pre-5.7 by replacing
DWC3_IS_VER_PRIOR check with direct comparison of dwc->revision] Signed-off-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 93b3a674485f ("mm,vmstat: reduce zone->lock holding time by
/proc/pagetypeinfo") upstream caps the number of iterations over each
free_list at 100,000, and also drops the zone->lock in between each
migrate type. Capping the iteration count alters the file contents in
some cases, which means this approach may not be suitable for stable
backports.
However, dropping zone->lock in between migrate types (and, as a result,
page orders) will not change the /proc/pagetypeinfo file contents. It
can significantly reduce the length of time spent with IRQs disabled,
which can prevent missed interrupts or soft lockups which we have
observed on systems with particularly large memory.
Thus, this commit is a modified version of the upstream one which only
drops the lock in between migrate types.
Fixes: 467c996c1e19 ("Print out statistics in relation to fragmentation avoidance to /proc/pagetypeinfo") Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com> Reviewed-by: Aruna Ramakrishna <aruna.ramakrishna@oracle.com> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The return value of hga_card_detect() is not properly handled causing
the probe to succeed even though hga_card_detect() failed. Since probe
succeeds, hgafb_open() can be called which will end up operating on an
unmapped hga_vram. This results in an out-of-bounds access as reported
by kernel test robot [1].
To fix this, correctly detect failure of hga_card_detect() by checking
for a non-zero error code.
syzbot is reporting OOB write at vga16fb_imageblit() [1], for
resize_screen() from ioctl(VT_RESIZE) returns 0 without checking whether
requested rows/columns fit the amount of memory reserved for the graphical
screen if current mode is KD_GRAPHICS.
Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter
which is the number of pixel rows per character (cell) rather than the
height of the font used.
For framebuffer devices the two values are always the same, because the
former is inferred from the latter one. For VGA used as a true text
mode device these two parameters are independent from each other: the
number of pixel rows per character is set in the CRT controller, while
font height is in fact hardwired to 32 pixel rows and fonts of heights
below that value are handled by padding their data with blanks when
loaded to hardware for use by the character generator. One can change
the setting in the CRT controller and it will update the screen contents
accordingly regardless of the font loaded.
The `v_clin' parameter is used by the `vgacon' driver to set the height
of the character cell and then the cursor position within. Make the
parameter explicit then, by defining a new `vc_cell_height' struct
member of `vc_data', set it instead of `vc_font.height' from `v_clin' in
the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver
except where actual font data is accessed which as noted above is
independent from the CRTC setting.
This way the framebuffer console driver is free to ignore the `v_clin'
parameter as irrelevant, as it always should have, avoiding any issues
attempts to give the parameter a meaning there could have caused, such
as one that has led to commit 988d0763361b ("vt_ioctl: make VT_RESIZEX
behave like VT_RESIZE"):
"syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2],
for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height
larger than actual font height calculated by con_font_set() from
ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates
minimal amount of memory based on actual font height calculated by
con_font_set(), use of vt_resizex() can cause UAF/OOB read for font
data."
The problem first appeared around Linux 2.5.66 which predates our repo
history, but the origin could be identified with the old MIPS/Linux repo
also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git>
as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX
code in `vt_ioctl' was updated as follows:
if (clin)
- video_font_height = clin;
+ vc->vc_font.height = clin;
making the parameter apply to framebuffer devices as well, perhaps due
to the use of "font" in the name of the original `video_font_height'
variable. Use "cell" in the new struct member then to avoid ambiguity.
Fix an issue with VGA console font size changes made after the initial
video text mode has been changed with a user tool like `svgatextmode'
calling the VT_RESIZEX ioctl. As it stands in that case the original
screen geometry continues being used to validate further VT resizing.
Consequently when the video adapter is firstly reprogrammed from the
original say 80x25 text mode using a 9x16 character cell (720x400 pixel
resolution) to say 80x37 text mode and the same character cell (720x592
pixel resolution), and secondly the CRTC character cell updated to 9x8
(by loading a suitable font with the KD_FONT_OP_SET request of the
KDFONTOP ioctl), the VT geometry does not get further updated from 80x37
and only upper half of the screen is used for the VT, with the lower
half showing rubbish corresponding to whatever happens to be there in
the video memory that maps to that part of the screen. Of course the
proportions change according to text mode geometries and font sizes
chosen.
Address the problem then, by updating the text mode geometry defaults
rather than checking against them whenever the VT is resized via a user
ioctl.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: e400b6ec4ede ("vt/vgacon: Check if screen resize request comes from userspace") Cc: stable@vger.kernel.org # v2.6.24+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function qlcnic_dl_lb_test() currently calls netdev_alloc_skb()
without checking afterwards that the allocation succeeded. Fix this by
checking if the skb is NULL and returning an error in such a case.
Breaking out of the loop if the skb is NULL is not correct as no error
would be reported to the caller and no message would be printed for the
user.
Check return value of lp5xx_read and if non-zero, jump to code at end of
the function, causing lp5523_stop_all_engines to be executed before
returning the error value up the call chain. This fixes the original
commit (248b57015f35) which was reverted due to the University of Minnesota
problems.
If alloc_workqueue() fails, properly catch this and propagate the error
to the calling functions, so that the devuce initialization will
properly error out.
Move ufshcd_set_variant call in ufs_hisi_init_common to common error
section at end of the function, and then jump to this from the error
checking statements for both devm_reset_control_get and
ufs_hisi_get_resource. This fixes the original commit (63a06181d7ce)
which was reverted due to the University of Minnesota problems.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Avri Altman <avri.altman@wdc.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Phillip Potter <phil@philpotter.co.uk> Link: https://lore.kernel.org/r/20210503115736.2104747-32-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case clk_prepare() fails, capture and propagate the error code up the
stack. If regulator_enable() was called earlier, properly unwind it by
calling regulator_disable().
niu_pci_eeprom_read() may fail, so add checks to its return value and
propagate the error up the callstack.
An examination of the callstack up to niu_pci_eeprom_read shows that:
niu_pci_eeprom_read() // returns int
niu_pci_vpd_scan_props() // returns int
niu_pci_vpd_fetch() // returns *void*
niu_get_invariants() // returns int
since niu_pci_vpd_fetch() returns void which breaks the bubbling up,
change its return type to int so that error is propagated upwards.
Signed-off-by: Du Cheng <ducheng2@gmail.com> Cc: Shannon Nelson <shannon.lee.nelson@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210503115736.2104747-24-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The change here was incorrect. While it is nice to check if
niu_pci_eeprom_read() succeeded or not when using the data, any error
that might have happened was not propagated upwards properly, causing
the kernel to assume that these reads were successful, which results in
invalid data in the buffer that was to contain the successfully read
data.
Cc: Kangjie Lu <kjlu@umn.edu> Cc: Shannon Nelson <shannon.lee.nelson@gmail.com> Cc: David S. Miller <davem@davemloft.net> Fixes: 26fd962bde0b ("niu: fix missing checks of niu_pci_eeprom_read") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210503115736.2104747-23-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
This commit does not properly detect if an error happens because the
logic after this loop will not detect that there was a failed
allocation.
Cc: Aditya Pakki <pakki001@umn.edu> Cc: David S. Miller <davem@davemloft.net> Fixes: 5bf7295fe34a ("qlcnic: Avoid potential NULL pointer dereference") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210503115736.2104747-25-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
This commit is not correct, it should not have used unlikely() and is
not propagating the error properly to the calling function, so it should
be reverted at this point in time. Also, if the check failed, the
work queue was still assumed to be allocated, so further accesses would
have continued to fail, meaning this patch does nothing to solve the
root issues at all.
Cc: Kangjie Lu <kjlu@umn.edu> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Bryan Brattlof <hello@bryanbrattlof.com> Fixes: 765976285a8c ("rtlwifi: fix a potential NULL pointer dereference") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210503115736.2104747-13-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, it was determined that this commit is not needed at all as
the media core already prevents memory disclosure on this codepath, so
just drop the extra memset happening here.
As Peter points out, if we were to disconnect and then reconnect this
driver from a device, the "global" state of the device would contain odd
values and could cause problems. Fix this up by just initializing the
whole thing to 0 at probe() time.
Ideally this would be a per-device variable, but given the age and the
total lack of users of it, that would require a lot of s/./->/g changes
for really no good reason.
Reported-by: Peter Rosin <peda@axentia.se> Cc: Jens Axboe <axboe@kernel.dk> Reviewed-by: Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/YJP2j6AU82MqEY2M@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fields, "toc" and "cd_info", of "struct gdrom_unit gd" are allocated
in "probe_gdrom()". Prevent a memory leak by making sure "gd.cd_info" is
deallocated in the "remove_gdrom()" function.
Also prevent double free of the field "gd.toc" by moving it from the
module's exit function to "remove_gdrom()". This is because, in
"probe_gdrom()", the function makes sure to deallocate "gd.toc" in case
of any errors, so the exit function invoked later would again free
"gd.toc".
The patch also maintains consistency by deallocating the above mentioned
fields in "remove_gdrom()" along with another memory allocated field
"gd.disk".
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
Because of this, all submissions from this group must be reverted from
the kernel tree and will need to be re-reviewed again to determine if
they actually are a valid fix. Until that work is complete, remove this
change to ensure that no problems are being introduced into the
codebase.
Cc: Wenwen Wang <wang6495@umn.edu> Cc: Peter Rosin <peda@axentia.se> Cc: Jens Axboe <axboe@kernel.dk> Fixes: 093c48213ee3 ("gdrom: fix a memory leak bug") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210503115736.2104747-27-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit is incorrect, it does not properly clean up on the
error path, so I'll keep the revert and fix it up properly with a
follow-on patch.
Cc: Kangjie Lu <kjlu@umn.edu> Cc: Avri Altman <avri.altman@wdc.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Fixes: 63a06181d7ce ("scsi: ufs: fix a missing check of devm_reset_control_get") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210503115736.2104747-31-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit log for this change was incorrect, no "error
handling code" was added, things will blow up just as badly as before if
any of these cases ever were true. As this BUG_ON() never fired, and
most of these checks are "obviously" never going to be true, let's just
revert to the original code for now until this gets unwound to be done
correctly in the future.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit here, while technically correct, did not fully
handle all of the reported issues that the commit stated it was fixing,
so revert it until it can be "fixed" fully.
Note, ioremap() probably will never fail for old hardware like this, and
if anyone actually used this hardware (a PowerMac era PCI display card),
they would not be using fbdev anymore.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, it was determined that this commit is not needed at all so
just revert it. Also, the call to lm80_init_client() was not properly
handled, so if error handling is needed in the lm80_probe() function,
then it should be done properly, not half-baked like the commit being
reverted here did.
Cc: Kangjie Lu <kjlu@umn.edu> Fixes: 9aa3aa15f4c2 ("hwmon: (lm80) fix a missing check of bus read in lm80 probe") Cc: stable <stable@vger.kernel.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210503115736.2104747-5-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit does not properly unwind if there is an error
condition so it needs to be reverted at this point in time.
Cc: Kangjie Lu <kjlu@umn.edu> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: stable <stable@vger.kernel.org> Fixes: 248b57015f35 ("leds: lp5523: fix a missing check of return value of lp55xx_read") Link: https://lore.kernel.org/r/20210503115736.2104747-9-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit causes a memory leak when it is trying to claim it
is properly handling errors. Revert this change and fix it up properly
in a follow-on commit.
Cc: Kangjie Lu <kjlu@umn.edu> Cc: David S. Miller <davem@davemloft.net> Fixes: f86a3b83833e ("net: stmicro: fix a missing check of clk_prepare") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210503115736.2104747-21-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
This patch "looks" correct, but the driver keeps on running and will
fail horribly right afterward if this error condition ever trips.
So points for trying to resolve an issue, but a huge NEGATIVE value for
providing a "fake" fix for the problem as nothing actually got resolved
at all. I'll go fix this up properly...
modprobe brd rd_size=1048576
dmsetup create o --table "0 `blockdev --getsize /dev/ram0` snapshot-origin /dev/ram0"
dmsetup create s --table "0 `blockdev --getsize /dev/ram0` snapshot /dev/ram0 /dev/ram1 N 0"
The reason is that when we test for zero chunk size, we jump to the label
bad_read_metadata without setting the "r" variable. The function
snapshot_ctr destroys all the structures and then exits with "r == 0". The
kernel then crashes because it falsely believes that snapshot_ctr
succeeded.
In order to fix the bug, we set the variable "r" to -EINVAL.
When multiple PCI devices get assigned to a guest right at boot, libxl
incrementally populates the backend tree. The writes for the first of
the devices trigger the backend watch. In turn xen_pcibk_setup_backend()
will set the XenBus state to Initialised, at which point no further
reconfigures would happen unless a device got hotplugged. Arrange for
reconfigure to also get triggered from the backend watch handler.
Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: stable@vger.kernel.org Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/2337cbd6-94b9-4187-9862-c03ea12e0c61@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be not be needed at all as the
change was useless because this function can only be called when
of_match_device matched on something. So it should be reverted.
In case create_workqueue() fails, release all resources and return -ENOMEM
to caller to avoid potential NULL pointer deref later. Move up the
create_workequeue() call to return early and avoid unwinding the call to
riocm_rx_fill().
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit has a memory leak on the error path here, it does
not clean up everything properly.
Cc: Kangjie Lu <kjlu@umn.edu> Cc: Alexandre Bounine <alex.bou9@gmail.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Fixes: 23015b22e47c ("rapidio: fix a NULL pointer dereference when create_workqueue() fails") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210503115736.2104747-45-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ubuntu users reported an audio bug on the Lenovo Yoga Slim 7 14IIL05,
he installed dual OS (Windows + Linux), if he booted to the Linux
from Windows, the Speaker can't work well, it has crackling noise,
if he poweroff the machine first after Windows, the Speaker worked
well.
Before rebooting or shutdown from Windows, the Windows changes the
codec eapd coeff value, but the BIOS doesn't re-initialize its value,
when booting into the Linux from Windows, the eapd coeff value is not
correct. To fix it, set the codec default value to that coeff register
in the alsa driver.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit message for this change was incorrect as the code
path can never result in a NULL dereference, alluding to the fact that
whatever tool was used to "find this" is broken. It's just an optional
resource reservation, so removing this check is fine.
Cc: Kangjie Lu <kjlu@umn.edu> Acked-by: Takashi Iwai <tiwai@suse.de> Fixes: dcd0feac9bab ("ALSA: sb8: add a check for request_region") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210503115736.2104747-35-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mackie d.2 has an extension card for IEEE 1394 communication, which uses
BridgeCo DM1000 ASIC. On the other hand, Mackie d.4 Pro has built-in
function for IEEE 1394 communication by Oxford Semiconductor OXFW971,
according to schematic diagram available in Mackie website. Although I
misunderstood that Mackie d.2 Pro would be also a model with OXFW971,
it's wrong. Mackie d.2 Pro is a model which includes the extension card
as factory settings.
This commit fixes entries in Kconfig and comment in ALSA OXFW driver.
Cc: <stable@vger.kernel.org> Fixes: fd6f4b0dc167 ("ALSA: bebob: Add skelton for BeBoB based devices") Fixes: ec4dba5053e1 ("ALSA: oxfw: Add support for Behringer/Mackie devices") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210513125652.110249-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
snd_usbmidi_get_ms_info() may access beyond the border when a
malformed descriptor is passed. This patch adds the sanity checks of
the given MS endpoint descriptors, and skips invalid ones.
Alesis iO 26 FireWire has two pairs of digital optical interface. It
delivers PCM frames from the interfaces by second isochronous packet
streaming. Although both of the interfaces are available at 44.1/48.0
kHz, first one of them is only available at 88.2/96.0 kHz. It reduces
the number of PCM samples to 4 in Multi Bit Linear Audio data channel
of data blocks on the second isochronous packet streaming.
This commit fixes hardcoded stream formats.
Cc: <stable@vger.kernel.org> Fixes: 28b208f600a3 ("ALSA: dice: add parameters of stream formats for models produced by Alesis") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210513125652.110249-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The initialization of MIDI devices that are found on some LINE6
drivers are currently done in a racy way; namely, the MIDI buffer
instance is allocated and initialized in each private_init callback
while the communication with the interface is already started via
line6_init_cap_control() call before that point. This may lead to
Oops in line6_data_received() when a spurious event is received, as
reported by syzkaller.
This patch moves the MIDI initialization to line6_init_cap_control()
as well instead of the too-lately-called private_init for avoiding the
race. Also this reduces slightly more lines, so it's a win-win
change.
At high sampling transfer frequency, TC Electronic Konnekt Live
transfers/receives 6 audio data frames in multi bit linear audio data
channel of data block in CIP payload. Current hard-coded stream format
is wrong.
Cc: <stable@vger.kernel.org> Fixes: f1f0f330b1d0 ("ALSA: dice: add parameters of stream formats for models produced by TC Electronic") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210518012612.37268-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When using smb2_copychunk_range() for large ranges we will
run through several iterations of a loop calling SMB2_ioctl()
but never actually free the returned buffer except for the final
iteration.
This leads to memory leaks everytime a large copychunk is requested.
Fixes: 9bf0c9cd4314 ("CIFS: Fix SMB2/SMB3 Copy offload support (refcopy) for large files") Cc: <stable@vger.kernel.org> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a interruptible mutex locker is interrupted by a signal
without acquiring this lock and removed from the wait queue.
if the mutex isn't contended enough to have a waiter
put into the wait queue again, the setting of the WAITER
bit will force mutex locker to go into the slowpath to
acquire the lock every time, so if the wait queue is empty,
the WAITER bit need to be clear.
Fixes: 040a0a371005 ("mutex: Add support for wound/wait style locks") Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Zqiang <qiang.zhang@windriver.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210517034005.30828-1-qiang.zhang@windriver.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Reset the ns->file value to NULL also in the error case in
nvmet_file_ns_enable().
The ns->file variable points either to file object or contains the
error code after the filp_open() call. This can lead to following
problem:
When the user first setups an invalid file backend and tries to enable
the ns, it will fail. Then the user switches over to a bdev backend
and enables successfully the ns. The first received I/O will crash the
system because the IO backend is chosen based on the ns->file value:
Suppose we have 2 threads, the group-leader L and a sub-theread T,
both parked in ptrace_stop(). Debugger tries to resume both threads
and does
ptrace(PTRACE_CONT, T);
ptrace(PTRACE_CONT, L);
If the sub-thread T execs in between, the 2nd PTRACE_CONT doesn not
resume the old leader L, it resumes the post-exec thread T which was
actually now stopped in PTHREAD_EVENT_EXEC. In this case the
PTHREAD_EVENT_EXEC event is lost, and the tracer can't know that the
tracee changed its pid.
This patch makes ptrace() fail in this case until debugger does wait()
and consumes PTHREAD_EVENT_EXEC which reports old_pid. This affects all
ptrace requests except the "asynchronous" PTRACE_INTERRUPT/KILL.
The patch doesn't add the new PTRACE_ option to not complicate the API,
and I _hope_ this won't cause any noticeable regression:
- If debugger uses PTRACE_O_TRACEEXEC and the thread did an exec
and the tracer does a ptrace request without having consumed
the exec event, it's 100% sure that the thread the ptracer
thinks it is targeting does not exist anymore, or isn't the
same as the one it thinks it is targeting.
- To some degree this patch adds nothing new. In the scenario
above ptrace(L) can fail with -ESRCH if it is called after the
execing sub-thread wakes the leader up and before it "steals"
the leader's pid.
init_dell_smbios_wmi() only registers the dell_smbios_wmi_driver on systems
where the Dell WMI interface is supported. While exit_dell_smbios_wmi()
unregisters it unconditionally, this leads to the following oops:
When there is fatal event on the slave port, the device is marked as not
active. We need to mark it as active again when the slave is recovered to
regain full functionality.
rxe_qp_do_cleanup() relies on valid pointer values in QP for the properly
created ones, but in case rxe_qp_from_init() failed it was filled with
garbage and caused tot the following error.
How the type promotion works in ternary expressions is a bit tricky.
The problem is that scpi_clk_get_val() returns longs, "ret" is a int
which holds a negative error code, and le32_to_cpu() is an unsigned int.
We want the negative error code to be cast to a negative long. But
because le32_to_cpu() is an u32 then "ret" is type promoted to u32 and
becomes a high positive and then it is promoted to long and it is still
a high positive value.
Fix this by getting rid of the ternary.
Link: https://lore.kernel.org/r/YIE7pdqV/h10tEAK@mwanda Fixes: 8cb7cf56c9fe ("firmware: add support for ARM System Control and Power Interface(SCPI) protocol") Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[sudeep.holla: changed to return 0 as clock rate on error] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some distributions are about to switch to Python 3 support only.
This means that /usr/bin/python, which is Python 2, is not available
anymore. Hence, switch scripts to use Python 3 explicitly.
Change every shebang which does not need an argument to use /usr/bin/env.
This is needed as not every distro has everything under /usr/bin,
sometimes not even bash.
When a VCPU is created, the kvm_vcpu struct is initialized to zero in
kvm_vm_ioctl_create_vcpu(). On VHE systems, the first time
vcpu.arch.mdcr_el2 is loaded on hardware is in vcpu_load(), before it is
set to a sensible value in kvm_arm_setup_debug() later in the run loop. The
result is that KVM executes for a short time with MDCR_EL2 set to zero.
This has several unintended consequences:
* Setting MDCR_EL2.HPMN to 0 is constrained unpredictable according to ARM
DDI 0487G.a, page D13-3820. The behavior specified by the architecture
in this case is for the PE to behave as if MDCR_EL2.HPMN is set to a
value less than or equal to PMCR_EL0.N, which means that an unknown
number of counters are now disabled by MDCR_EL2.HPME, which is zero.
* The host configuration for the other debug features controlled by
MDCR_EL2 is temporarily lost. This has been harmless so far, as Linux
doesn't use the other fields, but that might change in the future.
Let's avoid both issues by initializing the VCPU's mdcr_el2 field in
kvm_vcpu_vcpu_first_run_init(), thus making sure that the MDCR_EL2 register
has a consistent value after each vcpu_load().
Fixes: d5a21bcc2995 ("KVM: arm64: Move common VHE/non-VHE trap config in separate functions") Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210407144857.199746-3-alexandru.elisei@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bio completions can race when a page spans more than one file system
block. Add a spinlock to synchronize marking the page uptodate.
Fixes: 9dc55f1389f9 ("iomap: add support for sub-pagesize buffered I/O without buffer heads") Reported-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Same reasons than for the previous commits : 6289a98f0817 ("sit: proper dev_{hold|put} in ndo_[un]init methods") 40cb881b5aaa ("ip6_vti: proper dev_{hold|put} in ndo_[un]init methods") 7f700334be9a ("ip6_gre: proper dev_{hold|put} in ndo_[un]init methods")
After adopting CONFIG_PCPU_DEV_REFCNT=n option, syzbot was able to trigger
a warning [1]
Issue here is that:
- all dev_put() should be paired with a corresponding prior dev_hold().
- A driver doing a dev_put() in its ndo_uninit() MUST also
do a dev_hold() in its ndo_init(), only when ndo_init()
is returning 0.
Otherwise, register_netdevice() would call ndo_uninit()
in its error path and release a refcount too soon.
projects / users / dwmw2 / linux.git / log