Arnd Bergmann [Fri, 14 Mar 2025 17:00:03 +0000 (18:00 +0100)]
Merge tag 'qcom-arm64-fixes-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm Arm64 Devicetree fixes for v6.14
Revert the change to marking SDM845 SMMU dma-coherent, as this is
reported not to be true.
* tag 'qcom-arm64-fixes-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
Revert "arm64: dts: qcom: sdm845: Affirm IDR0.CCTW on apps_smmu"
Arnd Bergmann [Fri, 14 Mar 2025 16:55:55 +0000 (17:55 +0100)]
Merge tag 'asahi-soc-maintainers-6.14-fixes' of https://github.com/AsahiLinux/linux into arm/fixes
Two updates to our ARM/APPLE MACHINE SUPPORT section in MAINTAINERS:
- Added Neal Gompa as reviewer
- Added the files for our SPI controller driver
* tag 'asahi-soc-maintainers-6.14-fixes' of https://github.com/AsahiLinux/linux:
MAINTAINERS: Add myself (Neal Gompa) as a reviewer for ARM Apple support
MAINTAINERS: Add apple-spi driver & binding files
Arnd Bergmann [Fri, 14 Mar 2025 16:54:27 +0000 (17:54 +0100)]
Merge tag 'arm-soc/for-6.14/devicetree-fixes-part2' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
6.14, please pull the following:
- Chester fixes the switch port assignments on the ASUS RT-AC3200 and
RT-AC5300 routers
- Phil removes a Device Tree property flagging the BCM2711 ARM timers as
not being configured which would have prevented the use of vDSO on the
Pi 4 running a 32-bit kernel
* tag 'arm-soc/for-6.14/devicetree-fixes-part2' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: Fix switch port labels of ASUS RT-AC3200
ARM: dts: BCM5301X: Fix switch port labels of ASUS RT-AC5300
ARM: dts: bcm2711: Don't mark timer regs unconfigured
Neal Gompa [Mon, 3 Mar 2025 15:40:10 +0000 (10:40 -0500)]
MAINTAINERS: Add myself (Neal Gompa) as a reviewer for ARM Apple support
As a member of the Asahi Linux project, I (Neal) have been involved in
reviewing the patches downstream as part of enabling the Fedora Asahi Remix
distribution for years and have recently been reviewing patches for upstream
submission as well.
This formalizes my role as a reviewer for ARM Apple system support patches.
Jianfeng Liu [Fri, 28 Feb 2025 14:33:08 +0000 (22:33 +0800)]
arm64: dts: rockchip: slow down emmc freq for rock 5 itx
The current max-frequency 200000000 of emmc is not stable. When doing
heavy write there will be I/O Error. After setting max-frequency to 150000000 the emmc is stable under write.
Also remove property mmc-hs200-1_8v because we are already running at
HS400 mode.
Chester A. Unal [Tue, 4 Mar 2025 15:55:36 +0000 (15:55 +0000)]
ARM: dts: BCM5301X: Fix switch port labels of ASUS RT-AC3200
After using the device for a while, Tom reports that he initially described
the switch port labels incorrectly. Apparently, ASUS's own firmware also
describes them incorrectly. Correct them to what is seen on the chassis.
Phil Elwell [Sat, 22 Feb 2025 09:41:13 +0000 (10:41 +0100)]
ARM: dts: bcm2711: Don't mark timer regs unconfigured
During upstream process of Raspberry Pi 4 back in 2019 the ARMv7 stubs
didn't configured the ARM architectural timer. This firmware issue has
been fixed in 2020, which gave users enough time to update their system.
So drop this property to allow the use of the vDSO version of
clock_gettime.
Arnd Bergmann [Wed, 5 Feb 2025 12:11:33 +0000 (13:11 +0100)]
ARM: OMAP1: select CONFIG_GENERIC_IRQ_CHIP
When GENERIC_IRQ_CHIP is disabled, OMAP1 kernels fail to link:
arm-linux-gnueabi-ld: arch/arm/mach-omap1/irq.o: in function `omap1_init_irq':
irq.c:(.init.text+0x1e8): undefined reference to `irq_alloc_generic_chip'
arm-linux-gnueabi-ld: irq.c:(.init.text+0x228): undefined reference to `irq_setup_generic_chip'
arm-linux-gnueabi-ld: irq.c:(.init.text+0x2a8): undefined reference to `irq_gc_set_wake'
arm-linux-gnueabi-ld: irq.c:(.init.text+0x2b0): undefined reference to `irq_gc_mask_set_bit'
arm-linux-gnueabi-ld: irq.c:(.init.text+0x2b4): undefined reference to `irq_gc_mask_clr_bit'
This has apparently been the case for many years, but I never caught it
in randconfig builds until now, as there are dozens of other drivers
that also 'select GENERIC_IRQ_CHIP' and statistically there is almost
always one of them enabled.
Arnd Bergmann [Thu, 6 Mar 2025 15:34:42 +0000 (16:34 +0100)]
Merge tag 'riscv-dt-fixes-for-v6.14-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V Devicetree fix for v6.14-rc6
A single fix for an incorrect define in the jh7110 pinctrl header.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-fixes-for-v6.14-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: starfive: Fix a typo in StarFive JH7110 pin function definitions
Arnd Bergmann [Thu, 6 Mar 2025 15:32:48 +0000 (16:32 +0100)]
Merge tag 'imx-fixes-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.14:
- A tqma8mpql board fix from Alexander Stein to correct vqmmc-supply for
usdhc3
- A change from Joe Hattori to fix OF node leak in imx-scu driver probe
- A soc-imx8m driver fix from Peng Fan unregister cpufreq and soc device
in cleanup path
- A couple of changes from Stefan Eichenberger to fix iMX6 Apalis
poweroff and iMX8M verdin-dahlia sound-card descriptions
* tag 'imx-fixes-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: freescale: imx8mm-verdin-dahlia: add Microphone Jack to sound card
arm64: dts: freescale: imx8mp-verdin-dahlia: add Microphone Jack to sound card
soc: imx8m: Unregister cpufreq and soc dev in cleanup path
ARM: dts: imx6qdl-apalis: Fix poweroff on Apalis iMX6
arm64: dts: freescale: tqma8mpql: Fix vqmmc-supply
firmware: imx-scu: fix OF node leak in .probe()
Arnd Bergmann [Thu, 6 Mar 2025 15:31:22 +0000 (16:31 +0100)]
Merge tag 'arm-soc/for-6.14/devicetree-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
6.14:
- Stefan fixes the xHCI power domain on the Raspberry Pi 4
- Phil fixes the Raspberry Pi 4 PL011 UART primecell ID to indicate they are
r1p5 and thus have a 32-byte FIFO
* tag 'arm-soc/for-6.14/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2711: PL011 UARTs are actually r1p5
ARM: dts: bcm2711: Fix xHCI power-domain
Add missing "vpcie0v9-supply" and "vpcie1v8-supply" properties to the "pcie0"
node in the Pine64 RockPro64 board dtsi file. This eliminates the following
warnings from the kernel log:
rockchip-pcie f8000000.pcie: supply vpcie1v8 not found, using dummy regulator
rockchip-pcie f8000000.pcie: supply vpcie0v9 not found, using dummy regulator
These additions improve the accuracy of hardware description of the RockPro64
and, in theory, they should result in no functional changes to the way board
works after the changes, because the "vcca_0v9" and "vcca_1v8" regulators are
always enabled. [1][2] However, extended reliability testing, performed by
Chris, [3] has proven that the age-old issues with some PCI Express cards,
when used with a Pine64 RockPro64, are also resolved.
Those issues were already mentioned in the commit 43853e843aa6 (arm64: dts:
rockchip: Remove unsupported node from the Pinebook Pro dts, 2024-04-01),
together with a brief description of the out-of-tree enumeration delay patch
that reportedly resolves those issues. In a nutshell, booting a RockPro64
with some PCI Express cards attached to it caused a kernel oops. [4]
Symptomatically enough, to the commit author's best knowledge, only the Pine64
RockPro64, out of all RK3399-based boards and devices supported upstream, has
been reported to suffer from those PCI Express issues, and only the RockPro64
had some of the PCI Express supplies missing in its DT. Thus, perhaps some
weird timing issues exist that caused the "vcca_1v8" always-on regulator,
which is part of the RK808 PMIC, to actually not be enabled before the PCI
Express is initialized and enumerated on the RockPro64, causing oopses with
some PCIe cards, and the aforementioned enumeration delay patch [4] probably
acted as just a workaround for the underlying timing issue.
Admittedly, the Pine64 RockPro64 is a bit specific board by having a standard
PCI Express slot, allowing use of various standard cards, but pretty much
standard PCI Express cards have been attached to other RK3399 boards as well,
and the commit author is unaware ot such issues reported for them.
It's quite hard to be sure that the PCI Express issues are fully resolved by
these additions to the DT, without some really extensive and time-consuming
testing. However, these additions to the DT can result in good things and
improvements anyway, making them perfectly safe from the standpoint of being
unable to do any harm or cause some unforeseen regressions.
These changes apply to the both supported hardware revisions of the Pine64
RockPro64, i.e. to the production-run revisions 2.0 and 2.1. [1][2]
Add missing "avdd-0v9-supply" and "avdd-1v8-supply" properties to the "hdmi"
node in the Pine64 RockPro64 board dtsi file. To achieve this, also add the
associated "vcca_0v9" regulator that produces the 0.9 V supply, [1][2] which
hasn't been defined previously in the board dtsi file.
This also eliminates the following warnings from the kernel log:
dwhdmi-rockchip ff940000.hdmi: supply avdd-0v9 not found, using dummy regulator
dwhdmi-rockchip ff940000.hdmi: supply avdd-1v8 not found, using dummy regulator
There are no functional changes to the way board works with these additions,
because the "vcc1v8_dvp" and "vcca_0v9" regulators are always enabled, [1][2]
but these additions improve the accuracy of hardware description.
These changes apply to the both supported hardware revisions of the Pine64
RockPro64, i.e. to the production-run revisions 2.0 and 2.1. [1][2]
Linus Torvalds [Sun, 2 Mar 2025 18:08:45 +0000 (10:08 -0800)]
Merge tag 'dmaengine-fix-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- tegra210 div_u64 divison and max page fixes
- revert Qualcomm unavailable register workaround which is causing
regression, fixes have been proposed but still gaps are present so
revert this for now
* tag 'dmaengine-fix-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: Revert "dmaengine: qcom: bam_dma: Avoid writing unavailable register"
dmaengine: tegra210-adma: check for adma max page
dmaengine: tegra210-adma: Use div_u64 for 64 bit division
Linus Torvalds [Sun, 2 Mar 2025 17:54:25 +0000 (09:54 -0800)]
Merge tag 'phy-fixes-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- rockchip phy kconfig dependency fix with USB_COMMON and regression
fix for old DT
- stm32 phy overflow assertion fix
- exonysfs phy refclk masks fix and power gate on exit fix
- freescale fix for clock dividor valid range
- TI regmap syscon register fix
- tegra reset registers on init fix
* tag 'phy-fixes-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: tegra: xusb: reset VBUS & ID OVERRIDE
phy: ti: gmii-sel: Do not use syscon helper to build regmap
phy: exynos5-usbdrd: gs101: ensure power is gated to SS phy in phy_exit()
phy: freescale: fsl-samsung-hdmi: Limit PLL lock detection clock divider to valid range
phy: exynos5-usbdrd: fix MPLL_MULTIPLIER and SSC_REFCLKSEL masks in refclk
phy: stm32: Fix constant-value overflow assertion
phy: rockchip: naneng-combphy: compatible reset with old DT
phy: rockchip: fix Kconfig dependency more
Linus Torvalds [Sat, 1 Mar 2025 21:44:51 +0000 (13:44 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Ryan's been hard at work finding and fixing mm bugs in the arm64 code,
so here's a small crop of fixes for -rc5.
The main changes are to fix our zapping of non-present PTEs for
hugetlb entries created using the contiguous bit in the page-table
rather than a block entry at the level above. Prior to these fixes, we
were pulling the contiguous bit back out of the PTE in order to
determine the size of the hugetlb page but this is clearly bogus if
the thing isn't present and consequently both the clearing of the
PTE(s) and the TLB invalidation were unreliable.
Although the problem was found by code inspection, we really don't
want this sitting around waiting to trigger and the changes are CC'd
to stable accordingly.
Note that the diffstat looks a lot worse than it really is;
huge_ptep_get_and_clear() now takes a size argument from the core code
and so all the arch implementations of that have been updated in a
pretty mechanical fashion.
- Fix a sporadic boot failure due to incorrect randomization of the
linear map on systems that support it
- Fix the zapping (both clearing the entries *and* invalidating the
TLB) of hugetlb PTEs constructed using the contiguous bit"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: hugetlb: Fix flush_hugetlb_tlb_range() invalidation level
arm64: hugetlb: Fix huge_ptep_get_and_clear() for non-present ptes
mm: hugetlb: Add huge page size param to huge_ptep_get_and_clear()
arm64/mm: Fix Boot panic on Ampere Altra
Linus Torvalds [Sat, 1 Mar 2025 20:43:11 +0000 (12:43 -0800)]
Merge tag 'i2c-for-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"All driver fixes this time:
- fix interrupt initialization sequence (npcm)
- fix frequency setting (ls2x)
- re-enable interrupts properly at irq handler's exit (amd-asf)"
* tag 'i2c-for-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: amd-asf: Fix EOI register write to enable successive interrupts
i2c: ls2x: Fix frequency division register access
i2c: npcm: disable interrupt enable bit before devm_request_irq
Linus Torvalds [Sat, 1 Mar 2025 16:59:29 +0000 (08:59 -0800)]
Merge tag 'ata-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- Fix a regression where the enablement of the PHYs would be skipped
for device trees without any port child nodes (me)
- Revert ATA_QUIRK_NOLPM for Samsung SSD 870 QVO drives, as it stops
systems from entering lower package states. LPM works on newer
firmware versions. We will need a more refined quirk that only
targets the older firmware versions (me)
* tag 'ata-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
Revert "ata: libata-core: Add ATA_QUIRK_NOLPM for Samsung SSD 870 QVO drives"
ata: ahci: Make ahci_ignore_port() handle empty mask_port_map
Linus Torvalds [Sat, 1 Mar 2025 16:48:53 +0000 (08:48 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix TCR_EL2 configuration to not use the ASID in TTBR1_EL2 and not
mess-up T1SZ/PS by using the HCR_EL2.E2H==0 layout.
- Bring back the VMID allocation to the vcpu_load phase, ensuring
that we only setup VTTBR_EL2 once on VHE. This cures an ugly race
that would lead to running with an unallocated VMID.
RISC-V:
- Fix hart status check in SBI HSM extension
- Fix hart suspend_type usage in SBI HSM extension
- Fix error returned by SBI IPI and TIME extensions for unsupported
function IDs
- Fix suspend_type usage in SBI SUSP extension
- Remove unnecessary vcpu kick after injecting interrupt via IMSIC
guest file
x86:
- Fix an nVMX bug where KVM fails to detect that, after nested
VM-Exit, L1 has a pending IRQ (or NMI).
- To avoid freeing the PIC while vCPUs are still around, which would
cause a NULL pointer access with the previous patch, destroy vCPUs
before any VM-level destruction.
- Handle failures to create vhost_tasks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: retry nx_huge_page_recovery_thread creation
vhost: return task creation error instead of NULL
KVM: nVMX: Process events on nested VM-Exit if injectable IRQ or NMI is pending
KVM: x86: Free vCPUs before freeing VM state
riscv: KVM: Remove unnecessary vcpu kick
KVM: arm64: Ensure a VMID is allocated before programming VTTBR_EL2
KVM: arm64: Fix tcr_el2 initialisation in hVHE mode
riscv: KVM: Fix SBI sleep_type use
riscv: KVM: Fix SBI TIME error generation
riscv: KVM: Fix SBI IPI error generation
riscv: KVM: Fix hart suspend_type use
riscv: KVM: Fix hart suspend status check
It was reported that adding ATA_QUIRK_NOLPM for Samsung SSD 870 QVO drives
breaks entering lower package states for certain systems.
It turns out that Samsung SSD 870 QVO actually has working LPM when using
a recent SSD firmware version.
The author of commit cc77e2ce187d ("ata: libata-core: Add ATA_QUIRK_NOLPM
for Samsung SSD 870 QVO drives") reported himself that only older SSD
firmware versions have broken LPM:
https://lore.kernel.org/stable/93c10d38-718c-459d-84a5-4d87680b4da7@debian.org/
Unfortunately, he did not specify which older firmware version he was using
which had broken LPM.
Let's revert this quirk, which has FW version field specified as NULL
(which means that it applies for all Samsung SSD 870 QVO firmware versions)
for now. Once the author reports which older firmware version(s) that are
broken, we can create a more fine grained quirk, which populates the FW
version field accordingly.
Keith Busch [Thu, 27 Feb 2025 23:06:31 +0000 (15:06 -0800)]
kvm: retry nx_huge_page_recovery_thread creation
A VMM may send a non-fatal signal to its threads, including vCPU tasks,
at any time, and thus may signal vCPU tasks during KVM_RUN. If a vCPU
task receives the signal while its trying to spawn the huge page recovery
vhost task, then KVM_RUN will fail due to copy_process() returning
-ERESTARTNOINTR.
Rework call_once() to mark the call complete if and only if the called
function succeeds, and plumb the function's true error code back to the
call_once() invoker. This provides userspace with the correct, non-fatal
error code so that the VMM doesn't terminate the VM on -ENOMEM, and allows
subsequent KVM_RUN a succeed by virtue of retrying creation of the NX huge
page task.
Co-developed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
[implemented the kvm user side] Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-ID: <20250227230631.303431-3-kbusch@meta.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Keith Busch [Thu, 27 Feb 2025 23:06:30 +0000 (15:06 -0800)]
vhost: return task creation error instead of NULL
Lets callers distinguish why the vhost task creation failed. No one
currently cares why it failed, so no real runtime change from this
patch, but that will not be the case for long.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-ID: <20250227230631.303431-2-kbusch@meta.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Sat, 1 Mar 2025 02:02:23 +0000 (18:02 -0800)]
Merge tag 'thermal-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix the processing of DT thermal properties and the Power
Allocator thermal governor:
- Fix parsing cooling-maps in DT for trip points with more than one
cooling device (Rafael Wysocki)
- Fix granted_power computation in the Power Allocator thermal
governor and make it update total_weight on configuration changes
after the thermal zone has been registered (Yu-Che Cheng)"
* tag 'thermal-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: gov_power_allocator: Update total_weight on bind and cdev updates
thermal/of: Fix cdev lookup in thermal_of_should_bind()
thermal: gov_power_allocator: Fix incorrect calculation in divvy_up_power()
Linus Torvalds [Sat, 1 Mar 2025 01:40:27 +0000 (17:40 -0800)]
Merge tag 'pm-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix the handling of processors that stop the TSC in deeper C-states in
the intel_idle driver (Thomas Gleixner)"
* tag 'pm-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
intel_idle: Handle older CPUs, which stop the TSC in deeper C states, correctly
Linus Torvalds [Sat, 1 Mar 2025 01:05:22 +0000 (17:05 -0800)]
Merge tag 'x86-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix conflicts between devicetree and ACPI SMP discovery & setup
- Fix a warm-boot lockup on AMD SC1100 SoC systems
- Fix a W=1 build warning related to x86 IRQ trace event setup
- Fix a kernel-doc warning
* tag 'x86-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Fix kernel-doc warning
x86/irq: Define trace events conditionally
x86/CPU: Fix warm boot hang regression on AMD SC1100 SoC systems
x86/of: Don't use DTB for SMP setup if ACPI is enabled
Linus Torvalds [Sat, 1 Mar 2025 01:00:16 +0000 (17:00 -0800)]
Merge tag 'sched-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Prevent cond_resched() based preemption when interrupts are disabled,
on PREEMPT_NONE and PREEMPT_VOLUNTARY kernels"
* tag 'sched-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Prevent rescheduling when interrupts are disabled
Linus Torvalds [Sat, 1 Mar 2025 00:52:10 +0000 (16:52 -0800)]
Merge tag 'perf-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fixes from Ingo Molnar:
"Miscellaneous perf events fixes and a minor HW enablement change:
- Fix missing RCU protection in perf_iterate_ctx()
- Fix pmu_ctx_list ordering bug
- Reject the zero page in uprobes
- Fix a family of bugs related to low frequency sampling
- Add Intel Arrow Lake U CPUs to the generic Arrow Lake RAPL support
table
- Fix a lockdep-assert false positive in uretprobes"
* tag 'perf-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
uprobes: Remove too strict lockdep_assert() condition in hprobe_expire()
perf/x86/rapl: Add support for Intel Arrow Lake U
perf/x86/intel: Use better start period for frequency mode
perf/core: Fix low freq setting via IOC_PERIOD
perf/x86: Fix low freqency setting issue
uprobes: Reject the shared zeropage in uprobe_write_opcode()
perf/core: Order the PMU list to fix warning about unordered pmu_ctx_list
perf/core: Add RCU read lock protection to perf_iterate_ctx()
Linus Torvalds [Sat, 1 Mar 2025 00:45:36 +0000 (16:45 -0800)]
Merge tag 'objtool-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"Fix an objtool false positive, and objtool related build warnings that
happens on PIE-enabled architectures such as LoongArch"
* tag 'objtool-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Add bch2_trans_unlocked_or_in_restart_error() to bcachefs noreturns
objtool: Fix C jump table annotations for Clang
vmlinux.lds: Ensure that const vars with relocations are mapped R/O
Linus Torvalds [Fri, 28 Feb 2025 23:43:32 +0000 (15:43 -0800)]
Merge tag 'trace-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix crash from bad histogram entry
An error path in the histogram creation could leave an entry in a
link list that gets freed. Then when a new entry is added it can
cause a u-a-f bug. This is fixed by restructuring the code so that
the histogram is consistent on failure and everything is cleaned up
appropriately.
- Fix fprobe self test
The fprobe self test relies on no function being attached by ftrace.
BPF programs can attach to functions via ftrace and systemd now does
so. This causes those functions to appear in the enabled_functions
list which holds all functions attached by ftrace. The selftest also
uses that file to see if functions are being connected correctly. It
counts the functions in the file, but if there's already functions in
the file, it fails. Instead, add the number of functions in the file
at the start of the test to all the calculations during the test.
- Fix potential division by zero of the function profiler stddev
The calculated divisor that calculates the standard deviation of the
function times can overflow. If the overflow happens to land on zero,
that can cause a division by zero. Check for zero from the
calculation before doing the division.
TODO: Catch when it ever overflows and report it accordingly. For
now, just prevent the system from crashing.
* tag 'trace-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Avoid potential division by zero in function_stat_show()
selftests/ftrace: Let fprobe test consider already enabled functions
tracing: Fix bad hist from corrupting named_triggers list
Yao Zi [Fri, 28 Feb 2025 16:31:18 +0000 (16:31 +0000)]
arm64: dts: rockchip: Remove undocumented sdmmc property from lubancat-1
Property "supports-sd" isn't documented anywhere and is unnecessary for
mainline driver to function. It seems a property used by downstream
kernel was brought into mainline.
This should be reported by dtbs_check, but mmc-controller-common.yaml
defaults additionalProperties to true thus allows it. Remove the
property to clean the devicetree up and avoid possible confusion.
Thomas Gleixner [Tue, 25 Feb 2025 22:37:08 +0000 (23:37 +0100)]
intel_idle: Handle older CPUs, which stop the TSC in deeper C states, correctly
The Intel idle driver is preferred over the ACPI processor idle driver,
but fails to implement the work around for Core2 generation CPUs, where
the TSC stops in C2 and deeper C-states. This causes stalls and boot
delays, when the clocksource watchdog does not catch the unstable TSC
before the CPU goes deep idle for the first time.
The ACPI driver marks the TSC unstable when it detects that the CPU
supports C2 or deeper and the CPU does not have a non-stop TSC.
Add the equivivalent work around to the Intel idle driver to cure that.
Fixes: 18734958e9bf ("intel_idle: Use ACPI _CST for processor models without C-state tables") Reported-by: Fab Stz <fabstz-it@yahoo.fr> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Fab Stz <fabstz-it@yahoo.fr> Cc: All applicable <stable@vger.kernel.org> Closes: https://lore.kernel.org/all/10cf96aa-1276-4bd4-8966-c890377030c3@yahoo.fr Link: https://patch.msgid.link/87bjupfy7f.ffs@tglx Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* tag 'block-6.14-20250228' of git://git.kernel.dk/linux:
block: fix 'kmem_cache of name 'bio-108' already exists'
block: Remove zone write plugs when handling native zone append writes
block: make segment size limit workable for > 4K PAGE_SIZE
Linus Torvalds [Fri, 28 Feb 2025 16:47:21 +0000 (08:47 -0800)]
Merge tag 'efi-fixes-for-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"Another couple of EFI fixes for v6.14.
Only James's patch stands out, as it implements a workaround for odd
behavior in fwupd in user space, which creates EFI variables by
touching a file in efivarfs, clearing the immutable bit (which gets
set automatically for $reasons) and then opening it again for writing,
none of which is really necessary.
The fwupd author and LVFS maintainer is already rolling out a fix for
this on the fwupd side, and suggested that the workaround in this PR
could be backed out again during the next cycle.
(There is a semantic mismatch in efivarfs where some essential
variable attributes are stored in the first 4 bytes of the file, and
so zero length files cannot exist, as they cannot be written back to
the underlying variable store. So now, they are dropped once the last
reference is released.)
Summary:
- Fix CPER error record parsing bugs
- Fix a couple of efivarfs issues that were introduced in the merge
window
- Fix an issue in the early remapping code of the MOKvar table"
* tag 'efi-fixes-for-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/mokvar-table: Avoid repeated map/unmap of the same page
efi: Don't map the entire mokvar table to determine its size
efivarfs: allow creation of zero length files
efivarfs: Defer PM notifier registration until .fill_super
efi/cper: Fix cper_arm_ctx_info alignment
efi/cper: Fix cper_ia_proc_ctx alignment
Dan Carpenter [Fri, 28 Feb 2025 13:03:47 +0000 (16:03 +0300)]
gpiolib: Fix Oops in gpiod_direction_input_nonotify()
The gpiod_direction_input_nonotify() function is supposed to return zero
if the direction for the pin is input. But instead it accidentally
returns GPIO_LINE_DIRECTION_IN (1) which will be cast into an ERR_PTR()
in gpiochip_request_own_desc(). The callers dereference it and it leads
to a crash.
I changed gpiod_direction_output_raw_commit() just for consistency but
returning GPIO_LINE_DIRECTION_OUT (0) is fine.
Cc: stable@vger.kernel.org Fixes: 9d846b1aebbe ("gpiolib: check the return value of gpio_chip::get_direction()") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/254f3925-3015-4c9d-aac5-bb9b4b2cd2c5@stanley.mountain
[Bartosz: moved the variable declarations to the top of the functions] Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Ming Lei [Fri, 28 Feb 2025 13:26:56 +0000 (21:26 +0800)]
block: fix 'kmem_cache of name 'bio-108' already exists'
Device mapper bioset often has big bio_slab size, which can be more than
1000, then 8byte can't hold the slab name any more, cause the kmem_cache
allocation warning of 'kmem_cache of name 'bio-108' already exists'.
Fix the warning by extending bio_slab->name to 12 bytes, but fix output
of /proc/slabinfo
Lu Baolu [Fri, 28 Feb 2025 10:27:26 +0000 (18:27 +0800)]
iommu/vt-d: Fix suspicious RCU usage
Commit <d74169ceb0d2> ("iommu/vt-d: Allocate DMAR fault interrupts
locally") moved the call to enable_drhd_fault_handling() to a code
path that does not hold any lock while traversing the drhd list. Fix
it by ensuring the dmar_global_lock lock is held when traversing the
drhd list.
Without this fix, the following warning is triggered:
=============================
WARNING: suspicious RCU usage
6.14.0-rc3 #55 Not tainted
-----------------------------
drivers/iommu/intel/dmar.c:2046 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 1
2 locks held by cpuhp/1/23:
#0: ffffffff84a67c50 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0
#1: ffffffff84a6a380 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0
stack backtrace:
CPU: 1 UID: 0 PID: 23 Comm: cpuhp/1 Not tainted 6.14.0-rc3 #55
Call Trace:
<TASK>
dump_stack_lvl+0xb7/0xd0
lockdep_rcu_suspicious+0x159/0x1f0
? __pfx_enable_drhd_fault_handling+0x10/0x10
enable_drhd_fault_handling+0x151/0x180
cpuhp_invoke_callback+0x1df/0x990
cpuhp_thread_fun+0x1ea/0x2c0
smpboot_thread_fn+0x1f5/0x2e0
? __pfx_smpboot_thread_fn+0x10/0x10
kthread+0x12a/0x2d0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x4a/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Holding the lock in enable_drhd_fault_handling() triggers a lockdep splat
about a possible deadlock between dmar_global_lock and cpu_hotplug_lock.
This is avoided by not holding dmar_global_lock when calling
iommu_device_register(), which initiates the device probe process.
Jerry Snitselaar [Fri, 28 Feb 2025 10:27:25 +0000 (18:27 +0800)]
iommu/vt-d: Remove device comparison in context_setup_pass_through_cb
Remove the device comparison check in context_setup_pass_through_cb.
pci_for_each_dma_alias already makes a decision on whether the
callback function should be called for a device. With the check
in place it will fail to create context entries for aliases as
it walks up to the root bus.
Fixes: 2031c469f816 ("iommu/vt-d: Add support for static identity domain") Closes: https://lore.kernel.org/linux-iommu/82499eb6-00b7-4f83-879a-e97b4144f576@linux.intel.com/ Cc: stable@vger.kernel.org Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com> Link: https://lore.kernel.org/r/20250224180316.140123-1-jsnitsel@redhat.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
When updating the page table root field on the DTE, avoid overwriting any
bits that are already set. The earlier call to make_clear_dte() writes
default values that all DTEs must have set (currently DTE[V]), and those
must be preserved.
Currently this doesn't cause problems since the page table root update is
the first field that is set after make_clear_dte() is called, and
DTE_FLAG_V is set again later along with the permission bits (IR/IW).
Remove this redundant assignment too.
Linus Torvalds [Fri, 28 Feb 2025 05:17:58 +0000 (21:17 -0800)]
Merge tag 'drm-fixes-2025-02-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"This week's fixes pull, amdgpu mostly, with some xe and a few misc
others, the fb defio fix is bit of a change, but it avoids some nasty
NULL pointer crashes due to defio assuming page backing in places it
didn't have pages.
i915:
- Fix encoder HW state readout for DP UHBR MST
xe:
- OA uapi fix (Umesh)
- Userptr related fixes
- Remove a duplicated register entry
- Scheduler related fix to prevent exec races when freeing it"
* tag 'drm-fixes-2025-02-28' of https://gitlab.freedesktop.org/drm/kernel: (25 commits)
drm/fbdev-dma: Add shadow buffering for deferred I/O
drm/nouveau: Do not override forced connector status
drm/i915/dp_mst: Fix encoder HW state readout for UHBR MST
drm/xe: cancel pending job timer before freeing scheduler
drm/xe/regs: remove a duplicate definition for RING_CTL_SIZE(size)
drm/imagination: remove unnecessary header include path
drm/amdgpu: init return value in amdgpu_ttm_clear_buffer
drm/amd/display: Fix HPD after gpu reset
drm/amd/display: add a quirk to enable eDP0 on DP1
drm/amd/display: Disable PSR-SU on eDP panels
MAINTAINERS: Update AMDGPU DML maintainers info
drm/amd/display: restore edid reading from a given i2c adapter
mailmap: Add entry for Rodrigo Siqueira
MAINTAINERS: Change my role from Maintainer to Reviewer
drm/amdgpu/mes: keep enforce isolation up to date
drm/amdgpu/gfx: only call mes for enforce isolation if supported
MAINTAINERS: update amdgpu maintainers list
drm/amdgpu: disable BAR resize on Dell G5 SE
drm/amdkfd: Preserve cp_hqd_pq_control on update_mqd
amdgpu/pm/legacy: fix suspend/resume issues
...
Nikolay Kuratov [Thu, 6 Feb 2025 09:01:56 +0000 (12:01 +0300)]
ftrace: Avoid potential division by zero in function_stat_show()
Check whether denominator expression x * (x - 1) * 1000 mod {2^32, 2^64}
produce zero and skip stddev computation in that case.
For now don't care about rec->counter * rec->counter overflow because
rec->time * rec->time overflow will likely happen earlier.
Cc: stable@vger.kernel.org Cc: Wen Yang <wenyang@linux.alibaba.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/20250206090156.1561783-1-kniv@yandex-team.ru Fixes: e31f7939c1c27 ("ftrace: Avoid potential division by zero in function profiler") Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Heiko Carstens [Wed, 26 Feb 2025 14:27:03 +0000 (15:27 +0100)]
selftests/ftrace: Let fprobe test consider already enabled functions
The fprobe test fails on Fedora 41 since the fprobe test assumption that
the number of enabled_functions is zero before the test starts is not
necessarily true. Some user space tools, like systemd, add BPF programs
that attach to functions. Those will show up in the enabled_functions table
and must be taken into account by the fprobe test.
Therefore count the number of lines of enabled_functions before tests
start, and use that as base when comparing expected results.
Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Link: https://lore.kernel.org/20250226142703.910860-1-hca@linux.ibm.com Fixes: e85c5e9792b9 ("selftests/ftrace: Update fprobe test to check enabled_functions file") Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
ret = create_actions(); (return -EINVAL)
if (ret)
goto out_unreg;
[..]
ret = hist_trigger_enable(data, ...) {
list_add_tail_rcu(&data->list, &file->triggers); <<<---- SKIPPED!!! (this is important!)
[..]
out_unreg:
event_hist_unregister(.., data) {
cmd_ops->unreg(.., data, ..) [hist_unregister_trigger()] {
list_for_each_entry(iter, &file->triggers, list) {
if (!hist_trigger_match(data, iter, named_data, false)) <- never matches
continue;
[..]
test = iter;
}
if (test && test->ops->free) <<<-- test is NULL
test->ops->free(test) [event_hist_trigger_free()] {
[..]
if (data->name)
del_named_trigger(data) {
list_del(&data->named_list); <<<<-- NEVER gets removed!
}
}
}
}
[..]
kfree(data); <<<-- frees item but it is still on list
The next time a hist with name is registered, it causes an u-a-f bug and
the kernel can crash.
Move the code around such that if event_trigger_register() succeeds, the
next thing called is hist_trigger_enable() which adds it to the list.
A bunch of actions is called if get_named_trigger_data() returns false.
But that doesn't need to be called after event_trigger_register(), so it
can be moved up, allowing event_trigger_register() to be called just
before hist_trigger_enable() keeping them together and allowing the
file->triggers to be properly populated.
Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/20250227163944.1c37f85f@gandalf.local.home Fixes: 067fe038e70f6 ("tracing: Add variable reference handling to hist triggers") Reported-by: Tomas Glozar <tglozar@redhat.com> Tested-by: Tomas Glozar <tglozar@redhat.com> Reviewed-by: Tom Zanussi <zanussi@kernel.org> Closes: https://lore.kernel.org/all/CAP4=nvTsxjckSBTz=Oe_UYh8keD9_sZC4i++4h72mJLic4_W4A@mail.gmail.com/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Dave Airlie [Fri, 28 Feb 2025 00:45:58 +0000 (10:45 +1000)]
Merge tag 'drm-xe-fixes-2025-02-27' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
uAPI:
- OA uapi fix (Umesh)
Driver:
- Userptr related fixes (Auld)
- Remove a duplicated register entry (Mingong)
- Scheduler related fix to prevent exec races when freeing it (Tejas)
Thomas Gleixner [Mon, 16 Dec 2024 13:20:56 +0000 (14:20 +0100)]
sched/core: Prevent rescheduling when interrupts are disabled
David reported a warning observed while loop testing kexec jump:
Interrupts enabled after irqrouter_resume+0x0/0x50
WARNING: CPU: 0 PID: 560 at drivers/base/syscore.c:103 syscore_resume+0x18a/0x220
kernel_kexec+0xf6/0x180
__do_sys_reboot+0x206/0x250
do_syscall_64+0x95/0x180
The corresponding interrupt flag trace:
hardirqs last enabled at (15573): [<ffffffffa8281b8e>] __up_console_sem+0x7e/0x90
hardirqs last disabled at (15580): [<ffffffffa8281b73>] __up_console_sem+0x63/0x90
That means __up_console_sem() was invoked with interrupts enabled. Further
instrumentation revealed that in the interrupt disabled section of kexec
jump one of the syscore_suspend() callbacks woke up a task, which set the
NEED_RESCHED flag. A later callback in the resume path invoked
cond_resched() which in turn led to the invocation of the scheduler:
This is a long standing problem, which probably got more visible with
the recent printk changes. Something does a task wakeup and the
scheduler sets the NEED_RESCHED flag. cond_resched() sees it set and
invokes schedule() from a completely bogus context. The scheduler
enables interrupts after context switching, which causes the above
warning at the end.
Quite some of the code paths in syscore_suspend()/resume() can result in
triggering a wakeup with the exactly same consequences. They might not
have done so yet, but as they share a lot of code with normal operations
it's just a question of time.
The problem only affects the PREEMPT_NONE and PREEMPT_VOLUNTARY scheduling
models. Full preemption is not affected as cond_resched() is disabled and
the preemption check preemptible() takes the interrupt disabled flag into
account.
Cure the problem by adding a corresponding check into cond_resched().
Reported-by: David Woodhouse <dwmw@amazon.co.uk> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: David Woodhouse <dwmw@amazon.co.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@vger.kernel.org Closes: https://lore.kernel.org/all/7717fe2ac0ce5f0a2c43fdab8b11f4483d54a2a4.camel@infradead.org
commit c910f2b65518 ("arm64/mm: Update tlb invalidation routines for
FEAT_LPA2") changed the "invalidation level unknown" hint from 0 to
TLBI_TTL_UNKNOWN (INT_MAX). But the fallback "unknown level" path in
flush_hugetlb_tlb_range() was not updated. So as it stands, when trying
to invalidate CONT_PMD_SIZE or CONT_PTE_SIZE hugetlb mappings, we will
spuriously try to invalidate at level 0 on LPA2-enabled systems.
Fix this so that the fallback passes TLBI_TTL_UNKNOWN, and while we are
at it, explicitly use the correct stride and level for CONT_PMD_SIZE and
CONT_PTE_SIZE, which should provide a minor optimization.
Cc: stable@vger.kernel.org Fixes: c910f2b65518 ("arm64/mm: Update tlb invalidation routines for FEAT_LPA2") Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Link: https://lore.kernel.org/r/20250226120656.2400136-4-ryan.roberts@arm.com Signed-off-by: Will Deacon <will@kernel.org>
Ryan Roberts [Wed, 26 Feb 2025 12:06:52 +0000 (12:06 +0000)]
arm64: hugetlb: Fix huge_ptep_get_and_clear() for non-present ptes
arm64 supports multiple huge_pte sizes. Some of the sizes are covered by
a single pte entry at a particular level (PMD_SIZE, PUD_SIZE), and some
are covered by multiple ptes at a particular level (CONT_PTE_SIZE,
CONT_PMD_SIZE). So the function has to figure out the size from the
huge_pte pointer. This was previously done by walking the pgtable to
determine the level and by using the PTE_CONT bit to determine the
number of ptes at the level.
But the PTE_CONT bit is only valid when the pte is present. For
non-present pte values (e.g. markers, migration entries), the previous
implementation was therefore erroneously determining the size. There is
at least one known caller in core-mm, move_huge_pte(), which may call
huge_ptep_get_and_clear() for a non-present pte. So we must be robust to
this case. Additionally the "regular" ptep_get_and_clear() is robust to
being called for non-present ptes so it makes sense to follow the
behavior.
Fix this by using the new sz parameter which is now provided to the
function. Additionally when clearing each pte in a contig range, don't
gather the access and dirty bits if the pte is not present.
An alternative approach that would not require API changes would be to
store the PTE_CONT bit in a spare bit in the swap entry pte for the
non-present case. But it felt cleaner to follow other APIs' lead and
just pass in the size.
As an aside, PTE_CONT is bit 52, which corresponds to bit 40 in the swap
entry offset field (layout of non-present pte). Since hugetlb is never
swapped to disk, this field will only be populated for markers, which
always set this bit to 0 and hwpoison swap entries, which set the offset
field to a PFN; So it would only ever be 1 for a 52-bit PVA system where
memory in that high half was poisoned (I think!). So in practice, this
bit would almost always be zero for non-present ptes and we would only
clear the first entry if it was actually a contiguous block. That's
probably a less severe symptom than if it was always interpreted as 1
and cleared out potentially-present neighboring PTEs.
Cc: stable@vger.kernel.org Fixes: 66b3923a1a0f ("arm64: hugetlb: add support for PTE contiguous bit") Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Link: https://lore.kernel.org/r/20250226120656.2400136-3-ryan.roberts@arm.com Signed-off-by: Will Deacon <will@kernel.org>
Ryan Roberts [Wed, 26 Feb 2025 12:06:51 +0000 (12:06 +0000)]
mm: hugetlb: Add huge page size param to huge_ptep_get_and_clear()
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the huge_pte is being cleared in huge_ptep_get_and_clear().
Provide for this by adding an `unsigned long sz` parameter to the
function. This follows the same pattern as huge_pte_clear() and
set_huge_pte_at().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, loongarch, mips,
parisc, powerpc, riscv, s390, sparc). The actual arm64 bug will be fixed
in a separate commit.
Cc: stable@vger.kernel.org Fixes: 66b3923a1a0f ("arm64: hugetlb: add support for PTE contiguous bit") Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> # riscv Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> # s390 Link: https://lore.kernel.org/r/20250226120656.2400136-2-ryan.roberts@arm.com Signed-off-by: Will Deacon <will@kernel.org>
Linus Torvalds [Thu, 27 Feb 2025 17:32:42 +0000 (09:32 -0800)]
Merge tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth.
We didn't get netfilter or wireless PRs this week, so next week's PR
is probably going to be bigger. A healthy dose of fixes for bugs
introduced in the current release nonetheless.
Current release - regressions:
- Bluetooth: always allow SCO packets for user channel
- af_unix: fix memory leak in unix_dgram_sendmsg()
- rxrpc:
- remove redundant peer->mtu_lock causing lockdep splats
- fix spinlock flavor issues with the peer record hash
- eth: iavf: fix circular lock dependency with netdev_lock
- net: use rtnl_net_dev_lock() in
register_netdevice_notifier_dev_net() RDMA driver register notifier
after the device
Current release - new code bugs:
- ethtool: fix ioctl confusing drivers about desired HDS user config
- eth: ixgbe: fix media cage present detection for E610 device
Previous releases - regressions:
- loopback: avoid sending IP packets without an Ethernet header
- mptcp: reset connection when MPTCP opts are dropped after join
Previous releases - always broken:
- net: better track kernel sockets lifetime
- ipv6: fix dst ref loop on input in seg6 and rpl lw tunnels
- phy: qca807x: use right value from DTS for DAC_DSP_BIAS_CURRENT
- eth: enetc: number of error handling fixes
- dsa: rtl8366rb: reshuffle the code to fix config / build issue with
LED support"
* tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
net: ti: icss-iep: Reject perout generation request
idpf: fix checksums set in idpf_rx_rsc()
selftests: drv-net: Check if combined-count exists
net: ipv6: fix dst ref loop on input in rpl lwt
net: ipv6: fix dst ref loop on input in seg6 lwt
usbnet: gl620a: fix endpoint checking in genelink_bind()
net/mlx5: IRQ, Fix null string in debug print
net/mlx5: Restore missing trace event when enabling vport QoS
net/mlx5: Fix vport QoS cleanup on error
net: mvpp2: cls: Fixed Non IP flow, with vlan tag flow defination.
af_unix: Fix memory leak in unix_dgram_sendmsg()
net: Handle napi_schedule() calls from non-interrupt
net: Clear old fragment checksum value in napi_reuse_skb
gve: unlink old napi when stopping a queue using queue API
net: Use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net().
tcp: Defer ts_recent changes until req is owned
net: enetc: fix the off-by-one issue in enetc_map_tx_tso_buffs()
net: enetc: remove the mm_lock from the ENETC v4 driver
net: enetc: add missing enetc4_link_deinit()
net: enetc: update UDP checksum when updating originTimestamp field
...
Ard Biesheuvel [Thu, 27 Feb 2025 13:30:22 +0000 (14:30 +0100)]
efi/mokvar-table: Avoid repeated map/unmap of the same page
Tweak the logic that traverses the MOKVAR UEFI configuration table to
only unmap the entry header and map the next one if they don't live in
the same physical page.
Peter Jones [Wed, 26 Feb 2025 20:18:39 +0000 (15:18 -0500)]
efi: Don't map the entire mokvar table to determine its size
Currently, when validating the mokvar table, we (re)map the entire table
on each iteration of the loop, adding space as we discover new entries.
If the table grows over a certain size, this fails due to limitations of
early_memmap(), and we get a failure and traceback:
Mapping the entire structure isn't actually necessary, as we don't ever
need more than one entry header mapped at once.
Changes efi_mokvar_table_init() to only map each entry header, not the
entire table, when determining the table size. Since we're not mapping
any data past the variable name, it also changes the code to enforce
that each variable name is NUL terminated, rather than attempting to
verify it in place.
Cc: <stable@vger.kernel.org> Signed-off-by: Peter Jones <pjones@redhat.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Linus Torvalds [Thu, 27 Feb 2025 16:41:19 +0000 (08:41 -0800)]
Merge tag 'sound-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes. The only slightly large change is for ASoC
Cirrus codec, but that's still in a normal range. All the rest are
small device-specific fixes and should be fairly safe to take"
* tag 'sound-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix microphone regression on ASUS N705UD
ALSA: hda/realtek: Fix wrong mic setup for ASUS VivoBook 15
ASoC: cs35l56: Prevent races when soft-resetting using SPI control
firmware: cs_dsp: Remove async regmap writes
ASoC: Intel: sof_sdw: warn both sdw and pch dmic are used
ASoC: SOF: Intel: don't check number of sdw links when set dmic_fixup
ASoC: dapm-graph: set fill colour of turned on nodes
ASoC: fsl: Rename stream name of SAI DAI driver
ASoC: es8328: fix route from DAC to output
ALSA: usb-audio: Re-add sample rate quirk for Pioneer DJM-900NXS2
ASoC: tas2764: Set the SDOUT polarity correctly
ASoC: tas2764: Fix power control mask
ALSA: usb-audio: Avoid dropping MIDI events at closing multiple ports
ASoC: tas2770: Fix volume scale
IEP driver supports both perout and pps signal generation
but perout feature is faulty with half-cooked support
due to some missing configuration. Remove perout
support from the driver and reject perout requests with
"not supported" error code.
Change the test to check if 'combined-count' is a key in the dictionary
first and if not assume that this means the driver has separate RX and
TX queues.
With this change, the test now passes successfully on tg3 and mlx5
(which does have a 'combined-count').
Fixes: 1cf270424218 ("net: selftest: add test for netdev netlink queue-get API") Signed-off-by: Joe Damato <jdamato@fastly.com> Reviewed-by: David Wei <dw@davidwei.uk> Link: https://patch.msgid.link/20250226181957.212189-1-jdamato@fastly.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Quentin Schulz [Tue, 25 Feb 2025 11:53:29 +0000 (12:53 +0100)]
arm64: dts: rockchip: fix pinmux of UART0 for PX30 Ringneck on Haikou
UART0 pinmux by default configures GPIO0_B5 in its UART RTS function for
UART0. However, by default on Haikou, it is used as GPIO as UART RTS for
UART5.
Therefore, let's update UART0 pinmux to not configure the pin in that
mode, a later commit will make UART5 request the GPIO pinmux.
====================
fixes for seg6 and rpl lwtunnels on input
As a follow up to commit 92191dd10730 ("net: ipv6: fix dst ref loops in
rpl, seg6 and ioam6 lwtunnels"), we also need a conditional dst cache on
input for seg6_iptunnel and rpl_iptunnel to prevent dst ref loops (i.e.,
if the packet destination did not change, we may end up recording a
reference to the lwtunnel in its own cache, and the lwtunnel state will
never be freed). This series provides a fix to respectively prevent a
dst ref loop on input in seg6_iptunnel and rpl_iptunnel.
Justin Klaassen [Tue, 25 Feb 2025 17:03:58 +0000 (17:03 +0000)]
arm64: dts: rockchip: fix u2phy1_host status for NanoPi R4S
The u2phy1_host should always have the same status as usb_host1_ehci
and usb_host1_ohci, otherwise the EHCI and OHCI drivers may be
initialized for a disabled usb port.
Per the NanoPi R4S schematic, the phy-supply for u2phy1_host is set to
the vdd_5v regulator.
Nikita Zhandarovich [Mon, 24 Feb 2025 17:29:17 +0000 (20:29 +0300)]
usbnet: gl620a: fix endpoint checking in genelink_bind()
Syzbot reports [1] a warning in usb_submit_urb() triggered by
inconsistencies between expected and actually present endpoints
in gl620a driver. Since genelink_bind() does not properly
verify whether specified eps are in fact provided by the device,
in this case, an artificially manufactured one, one may get a
mismatch.
Fix the issue by resorting to a usbnet utility function
usbnet_get_endpoints(), usually reserved for this very problem.
Check for endpoints and return early before proceeding further if
any are missing.
James Bottomley [Wed, 26 Feb 2025 21:48:26 +0000 (16:48 -0500)]
efivarfs: allow creation of zero length files
Temporarily allow the creation of zero length files in efivarfs so the
'fwupd' user space firmware update tool can continue to operate. This
hack should be reverted as soon as the fwupd mechanisms for updating
firmware have been fixed.
fwupd has been coded to open a firmware file, close it, remove the
immutable bit and write to it. Since commit 908af31f4896 ("efivarfs:
fix error on write to new variable leaving remnants") this behaviour
results in the first close removing the file which causes the second
write to fail. To allow fwupd to keep working code up an indicator of
size 1 if a write fails and only remove the file on that condition (so
create at zero size is allowed).
Tested-by: Richard Hughes <richard@hughsie.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
[ardb: replace LVFS with fwupd, as suggested by Richard] Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Xi Ruoyao [Wed, 26 Feb 2025 13:28:41 +0000 (21:28 +0800)]
MIPS: Ignore relocs against __ex_table for relocatable kernel
Since commit 6f2c2f93a190 ("scripts/sorttable: Remove unneeded
Elf_Rel"), sorttable no longer clears relocs against __ex_table,
claiming "it was never used." But in fact MIPS relocatable kernel had
been implicitly depending on this behavior, so after this commit the
MIPS relocatable kernel has started to spit oops like:
Thomas Zimmermann [Wed, 11 Dec 2024 09:06:28 +0000 (10:06 +0100)]
drm/fbdev-dma: Add shadow buffering for deferred I/O
DMA areas are not necessarily backed by struct page, so we cannot
rely on it for deferred I/O. Allocate a shadow buffer for drivers
that require deferred I/O and use it as framebuffer memory.
Fixes driver errors about being "Unable to handle kernel NULL pointer
dereference at virtual address" or "Unable to handle kernel paging
request at virtual address".
The patch splits drm_fbdev_dma_driver_fbdev_probe() in an initial
allocation, which creates the DMA-backed buffer object, and a tail
that sets up the fbdev data structures. There is a tail function for
direct memory mappings and a tail function for deferred I/O with
the shadow buffer.
It is no longer possible to use deferred I/O without shadow buffer.
It can be re-added if there exists a reliably test for usable struct
page in the allocated DMA-backed buffer object.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reported-by: Nuno Gonçalves <nunojpg@gmail.com>
CLoses: https://lore.kernel.org/dri-devel/CAEXMXLR55DziAMbv_+2hmLeH-jP96pmit6nhs6siB22cpQFr9w@mail.gmail.com/ Tested-by: Nuno Gonçalves <nunojpg@gmail.com> Fixes: 5ab91447aa13 ("drm/tiny/ili9225: Use fbdev-dma") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: <stable@vger.kernel.org> # v6.11+ Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241211090643.74250-1-tzimmermann@suse.de
Fixes: 1274daede3ef ("net: mvpp2: cls: Add steering based on vlan Id and priority.") Signed-off-by: Harshal Chaudhari <hchaudhari@marvell.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250225042058.2643838-1-hchaudhari@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 689c398885cc ("af_unix: Defer sock_put() to clean up path in
unix_dgram_sendmsg().") defers sock_put() in the error handling path.
However, it fails to account for the condition 'msg->msg_namelen != 0',
resulting in a memory leak when the code jumps to the 'lookup' label.
Fix issue by calling sock_put() if 'msg->msg_namelen != 0' is met.
Fixes: 689c398885cc ("af_unix: Defer sock_put() to clean up path in unix_dgram_sendmsg().") Signed-off-by: Adrian Huang <ahuang12@lenovo.com> Acked-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250225021457.1824-1-ahuang12@lenovo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Frederic Weisbecker [Sun, 23 Feb 2025 22:17:08 +0000 (23:17 +0100)]
net: Handle napi_schedule() calls from non-interrupt
napi_schedule() is expected to be called either:
* From an interrupt, where raised softirqs are handled on IRQ exit
* From a softirq disabled section, where raised softirqs are handled on
the next call to local_bh_enable().
* From a softirq handler, where raised softirqs are handled on the next
round in do_softirq(), or further deferred to a dedicated kthread.
Other bare tasks context may end up ignoring the raised NET_RX vector
until the next random softirq handling opportunity, which may not
happen before a while if the CPU goes idle afterwards with the tick
stopped.
Such "misuses" have been detected on several places thanks to messages
of the kind:
"NOHZ tick-stop error: local softirq work is pending, handler #08!!!"
019edd01d174 ("ath10k: sdio: Add missing BH locking around napi_schdule()") 330068589389 ("idpf: disable local BH when scheduling napi for marker packets") e3d5d70cb483 ("net: lan78xx: fix "softirq work is pending" error") e55c27ed9ccf ("mt76: mt7615: add missing bh-disable around rx napi schedule") c0182aa98570 ("mt76: mt7915: add missing bh-disable around tx napi enable/schedule") 970be1dff26d ("mt76: disable BH around napi_schedule() calls") 019edd01d174 ("ath10k: sdio: Add missing BH locking around napi_schdule()") 30bfec4fec59 ("can: rx-offload: can_rx_offload_threaded_irq_finish(): add new function to be called from threaded interrupt") e63052a5dd3c ("mlx5e: add add missing BH locking around napi_schdule()") 83a0c6e58901 ("i40e: Invoke softirqs after napi_reschedule") bd4ce941c8d5 ("mlx4: Invoke softirqs after napi_reschedule") 8cf699ec849f ("mlx4: do not call napi_schedule() without care") ec13ee80145c ("virtio_net: invoke softirqs after __napi_schedule")
This shows that relying on the caller to arrange a proper context for
the softirqs to be handled while calling napi_schedule() is very fragile
and error prone. Also fixing them can also prove challenging if the
caller may be called from different kinds of contexts.
Therefore fix this from napi_schedule() itself with waking up ksoftirqd
when softirqs are raised from task contexts.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Reported-by: Jakub Kicinski <kuba@kernel.org> Reported-by: Francois Romieu <romieu@fr.zoreil.com> Closes: https://lore.kernel.org/lkml/354a2690-9bbf-4ccb-8769-fa94707a9340@molgen.mpg.de/ Cc: Breno Leitao <leitao@debian.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250223221708.27130-1-frederic@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mohammad Heib [Tue, 25 Feb 2025 11:28:52 +0000 (13:28 +0200)]
net: Clear old fragment checksum value in napi_reuse_skb
In certain cases, napi_get_frags() returns an skb that points to an old
received fragment, This skb may have its skb->ip_summed, csum, and other
fields set from previous fragment handling.
Some network drivers set skb->ip_summed to either CHECKSUM_COMPLETE or
CHECKSUM_UNNECESSARY when getting skb from napi_get_frags(), while
others only set skb->ip_summed when RX checksum offload is enabled on
the device, and do not set any value for skb->ip_summed when hardware
checksum offload is disabled, assuming that the skb->ip_summed
initiated to zero by napi_reuse_skb, ionic driver for example will
ignore/unset any value for the ip_summed filed if HW checksum offload is
disabled, and if we have a situation where the user disables the
checksum offload during a traffic that could lead to the following
errors shown in the kernel logs:
<IRQ>
dump_stack_lvl+0x34/0x48
__skb_gro_checksum_complete+0x7e/0x90
tcp6_gro_receive+0xc6/0x190
ipv6_gro_receive+0x1ec/0x430
dev_gro_receive+0x188/0x360
? ionic_rx_clean+0x25a/0x460 [ionic]
napi_gro_frags+0x13c/0x300
? __pfx_ionic_rx_service+0x10/0x10 [ionic]
ionic_rx_service+0x67/0x80 [ionic]
ionic_cq_service+0x58/0x90 [ionic]
ionic_txrx_napi+0x64/0x1b0 [ionic]
__napi_poll+0x27/0x170
net_rx_action+0x29c/0x370
handle_softirqs+0xce/0x270
__irq_exit_rcu+0xa3/0xc0
common_interrupt+0x80/0xa0
</IRQ>
This inconsistency sometimes leads to checksum validation issues in the
upper layers of the network stack.
To resolve this, this patch clears the skb->ip_summed value for each
reused skb in by napi_reuse_skb(), ensuring that the caller is responsible
for setting the correct checksum status. This eliminates potential
checksum validation issues caused by improper handling of
skb->ip_summed.
Fixes: 76620aafd66f ("gro: New frags interface to avoid copying shinfo") Signed-off-by: Mohammad Heib <mheib@redhat.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250225112852.2507709-1-mheib@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima [Tue, 25 Feb 2025 21:10:23 +0000 (13:10 -0800)]
net: Use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net().
Breno Leitao reported the splat below. [0]
Commit 65161fb544aa ("net: Fix dev_net(dev) race in
unregister_netdevice_notifier_dev_net().") added the
DEBUG_NET_WARN_ON_ONCE(), assuming that the netdev is not
registered before register_netdevice_notifier_dev_net().
But the assumption was simply wrong.
Let's use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net().
Linus Torvalds [Thu, 27 Feb 2025 00:55:30 +0000 (16:55 -0800)]
Merge tag 'bcachefs-2025-02-26' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"A couple small ones, the main user visible changes/fixes are:
- Fix a bug where truncate would rarely fail and return 1
- Revert the directory i_size code: this turned out to have a number
of issues that weren't noticed because the fsck code wasn't
correctly reporting errors (ouch), and we're late enough in the
cycle that it can just wait until 6.15"
* tag 'bcachefs-2025-02-26' of git://evilpiepirate.org/bcachefs:
bcachefs: Fix truncate sometimes failing and returning 1
bcachefs: Fix deadlock
bcachefs: Check for -BCH_ERR_open_buckets_empty in journal resize
bcachefs: Revert directory i_size
bcachefs: fix bch2_extent_ptr_eq()
bcachefs: Fix memmove when move keys down
bcachefs: print op->nonce on data update inconsistency
Ryan Roberts [Tue, 25 Feb 2025 11:46:36 +0000 (11:46 +0000)]
arm64/mm: Fix Boot panic on Ampere Altra
When the range of present physical memory is sufficiently small enough
and the reserved address space for the linear map is sufficiently large
enough, The linear map base address is randomized in
arm64_memblock_init().
Prior to commit 62cffa496aac ("arm64/mm: Override PARange for !LPA2 and
use it consistently"), we decided if the sizes were suitable with the
help of the raw mmfr0.parange. But the commit changed this to use the
sanitized version instead. But the function runs before the register has
been sanitized so this returns 0, interpreted as a parange of 32 bits.
Some fun wrapping occurs and the logic concludes that there is enough
room to randomize the linear map base address, when really there isn't.
So the top of the linear map ends up outside the reserved address space.
Since the PA range cannot be overridden in the first place, restore the
mmfr0 reading logic to its state prior to 62cffa496aac, where the raw
register value is used.
Reported-by: Luiz Capitulino <luizcap@redhat.com> Suggested-by: Ard Biesheuvel <ardb@kernel.org> Closes: https://lore.kernel.org/all/a3d9acbe-07c2-43b6-9ba9-a7585f770e83@redhat.com/ Fixes: 62cffa496aac ("arm64/mm: Override PARange for !LPA2 and use it consistently") Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Link: https://lore.kernel.org/r/20250225114638.2038006-1-ryan.roberts@arm.com Cc: stable@vger.kernel.org Signed-off-by: Will Deacon <will@kernel.org>
Linus Torvalds [Wed, 26 Feb 2025 23:13:10 +0000 (15:13 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Small ufs fixes and a core change to clear the command private area on
every retry (which fixes a reported bug in virtio_scsi)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: bsg: Fix crash when arpmb command fails
scsi: ufs: core: Set default runtime/system PM levels before ufshcd_hba_init()
scsi: core: Clear driver private data when retrying request
scsi: ufs: core: Fix ufshcd_is_ufs_dev_busy() and ufshcd_eh_timed_out()
Shyam Sundar S K [Wed, 19 Feb 2025 13:57:47 +0000 (19:27 +0530)]
i2c: amd-asf: Fix EOI register write to enable successive interrupts
The commit b1f8921dfbaa
("i2c: amd-asf: Clear remote IRR bit to get successive interrupt")
introduced a method to enable successive interrupts but inadvertently
omitted the necessary write to the EOI register, resulting in a failure to
receive successive interrupts.
Fix this by adding the required write to the EOI register.
Fixes: b1f8921dfbaa ("i2c: amd-asf: Clear remote IRR bit to get successive interrupt") Cc: stable@vger.kernel.org # v6.13+ Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com> Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Fixes: 9b25419ad397 ("i2c: amd-asf: Add routine to handle the ASF slave process") Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250219135747.3251182-1-Shyam-sundar.S-k@amd.com
projects / users / hch / misc.git / log