Daniel Vetter [Fri, 5 Jul 2024 09:36:24 +0000 (11:36 +0200)]
Merge tag 'mediatek-drm-next-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 6.11
1. Convert to platform remove callback returning void
2. Drop chain_mode_fixup call in mode_valid()
3. Fixes the errors of MediaTek display driver found by IGT.
4. Add display support for the MT8365-EVK board
5. Fix bit depth overwritten for mtk_ovl_set bit_depth()
6. Remove less-than-zero comparison of an unsigned value
7. Call drm_atomic_helper_shutdown() at shutdown time
8. Log errors in probe with dev_err_probe()
9. Fix possible_crtcs calculation
10. Fix spurious kfree()
Daniel Vetter [Fri, 5 Jul 2024 09:21:34 +0000 (11:21 +0200)]
Merge tag 'exynos-drm-next-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Some cleanups to Exynos Virtual Display driver
- Use drm_edid_duplicate() instead of kmemdup().
- Replace existing EDID handling with struct drm_edid functions
for improved management.
- Keep an allocated raw_edid or NULL and handle fake_edid_info in get_modes().
Daniel Vetter [Fri, 5 Jul 2024 08:35:14 +0000 (10:35 +0200)]
Merge v6.10-rc6 into drm-next
The exynos-next pull is based on a newer -rc than drm-next. hence
backmerge first to make sure the unrelated conflicts we accumulated
don't end up randomly in the exynos merge pull, but are separated out.
Conflicts are all benign: Adjacent changes in amdgpu and fbdev-dma
code, and cherry-pick conflict in xe.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Thu, 30 May 2024 10:01:54 +0000 (13:01 +0300)]
drm/exynos/vidi: convert to struct drm_edid
Prefer the struct drm_edid based functions for storing the EDID and
updating the connector.
It would be better if the vidi connection ioctl passed in the EDID size
separately instead of relying on the extension count specified in the
EDID, but that's what we have to rely on.
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Jani Nikula [Thu, 30 May 2024 10:01:53 +0000 (13:01 +0300)]
drm/exynos/vidi: simplify fake edid handling
Avoid assigning fake_edid_info to ctx->raw_edid. Always keep
ctx->raw_edid either an allocated pointer or NULL. Defer fake_edid_info
handling to .get_modes().
This should be functionally equivalent but slightly easier to follow.
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
drm/amdgpu: fix out of bounds access in gfx11 during ip dump
During ip dump in gfx11 the index variable is reused but is
not reinitialized to 0 and this causes the index calculation
to be wrong and access out of bound access.
Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tim Huang [Wed, 15 May 2024 04:57:02 +0000 (12:57 +0800)]
drm/amd/pm: add SMU IP v14.0.4 support
This patch is to add SMU 14.0.4 support.
Signed-off-by: Li Ma <li.ma@amd.com> Signed-off-by: Tim Huang <Tim.Huang@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace IP VERSION with smu->is_apu in if condition.
And the dpmtable of smu v14.0.4 is same as smu v14.0.0.
Signed-off-by: Li Ma <li.ma@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: fix out of bounds access in gfx10 during ip dump
During ip dump in gfx10 the index variable is reused but is
not reinitialized to 0 and this causes the index calculation
to be wrong and access out of bound access.
Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix unsigned comparison with less than zero
The return value from the call to dml21_find_dc_pipes_for_plane() is int.
However, the return value is being assigned to an unsigned int variable
'num_pipes', the condition if(num_pipes <= 0) is not rigorous enough,
so making 'num_pipes' an int.
./drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_wrapper.c:318:6-15: WARNING: Unsigned expression compared with zero: num_pipes <= 0.
./drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_wrapper.c:360:6-15: WARNING: Unsigned expression compared with zero: num_pipes <= 0.
Extend this WA to BMG GT as well. In this case media GT is
not affected. The cap frequencies and max allowed ggtt writes
are different as well. On BMG, we need to do a flush after 1100
GGTT writes, and we need to limit the GT frequency request
to 2133 Mhz during driver load and leave it at that value after
driver unloads.
Marek Olšák [Sat, 1 Jun 2024 19:05:20 +0000 (15:05 -0400)]
drm/amdgpu: add amdgpu_framebuffer::gfx12_dcc
amdgpu_framebuffer doesn't have tiling_flags, so we need this.
amdgpu_display_get_fb_info never gets NULL parameters, so checking for NULL
was useless.
Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Marek Olšák [Sat, 1 Jun 2024 23:53:01 +0000 (19:53 -0400)]
drm/amdgpu: handle gfx12 in amdgpu_display_verify_sizes
It verified GFX9-11 swizzle modes on GFX12, which has undefined behavior.
Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Marek Olšák [Sat, 1 Jun 2024 21:25:51 +0000 (17:25 -0400)]
drm/amdgpu: don't use amdgpu_lookup_format_info on gfx12
It only uses fields for GFX9-11 related to the separate DCC buffer,
which doesn't exist in GFX12.
Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Marek Olšák [Fri, 31 May 2024 23:48:05 +0000 (19:48 -0400)]
drm/amdgpu/gfx12: remove GDS leftovers
GDS doesn't exist in gfx12. The incomplete packet allows userspace to hang
the hw from the kernel.
Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Marek Olšák [Fri, 31 May 2024 23:38:18 +0000 (19:38 -0400)]
drm/amdgpu/gfx12: remove superfluous cache flags
If any INV flags are needed, they should be executed via ACQUIRE_MEM
before INDIRECT_BUFFER.
GLM flags are also removed because the hw ignores them.
Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Marek Olšák [Fri, 31 May 2024 23:38:18 +0000 (19:38 -0400)]
drm/amdgpu/gfx11: remove superfluous cache flags
If any INV flags are needed, they should be executed via ACQUIRE_MEM
before INDIRECT_BUFFER.
Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Marek Olšák [Sat, 1 Jun 2024 20:36:27 +0000 (16:36 -0400)]
drm/amdgpu: check for LINEAR_ALIGNED correctly in check_tiling_flags_gfx6
Fix incorrect check.
Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Wed, 26 Jun 2024 18:08:41 +0000 (14:08 -0400)]
drm/amd/display: Fix array-index-out-of-bounds in dml2/FCLKChangeSupport
[Why]
Potential out of bounds access in dml2_calculate_rq_and_dlg_params()
because the value of out_lowest_state_idx used as an index for FCLKChangeSupport
array can be greater than 1.
[How]
Currently dml2 core specifies identical values for all FCLKChangeSupport
elements. Always use index 0 in the condition to avoid out of bounds access.
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom Chung [Fri, 14 Jun 2024 07:38:56 +0000 (15:38 +0800)]
drm/amd/display: Fix refresh rate range for some panel
[Why]
Some of the panels does not have the refresh rate range info
in base EDID and only have the refresh rate range info in
DisplayID block.
It will cause the max/min freesync refresh rate set to 0.
[How]
Try to parse the refresh rate range info from DisplayID if the
max/min refresh rate is 0.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Xi (Alex) Liu [Wed, 12 Jun 2024 16:45:19 +0000 (12:45 -0400)]
drm/amd/display: replace CRTC disable function call
[Why]
In OTG disable workarund, CRTC is disabled immediately
to improve performance, but this may cause timing issue
in DP HPO encoder FIFO and result in blank CRCs.
[How]
Replace the immediate CRTC disable call with normal disable call
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Xi (Alex) Liu <xi.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Thu, 20 Jun 2024 19:11:38 +0000 (15:11 -0400)]
drm/amd/display: Account for cursor prefetch BW in DML1 mode support
[Description]
We need to ensure to take into account cursor prefetch BW in
mode support or we may pass ModeQuery but fail an actual flip
which will cause a hang. Flip may fail because the cursor_pre_bw
is populated during mode programming (and mode programming is
never called prior to ModeQuery).
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Mon, 17 Jun 2024 16:58:35 +0000 (12:58 -0400)]
drm/amd/display: fix a crash when clock source is reference for non otg master pipe
[why]
The function enumerates all pipes without checking pipe type. It is only
supposed to call program pixel clock for OTG master pipe only.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Mon, 17 Jun 2024 19:45:51 +0000 (15:45 -0400)]
drm/amd/display: Add debug option for disabling SLDO optimizations
[Why]
DM can hook this up to disable SLDO optimizations in firmware during
DMCUB initialization for debug purposes.
[How]
Add the option and pass it through dmub_srv.
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Paul Hsieh [Thu, 20 Jun 2024 09:09:25 +0000 (17:09 +0800)]
drm/amd/display: un-block 8k with single dimm
[Why]
Driver doesn't validate multi-display with scaling when OS calls DDI.
This behavior causes the validated result to be a mismatch
between some automated test cases.
To address this issue, some workaround was added that caused issues in 8k.
[How]
Since the origin issue had been root caused,
revert the previous workaround and unblock 8k with a single dimm.
Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ryan Seto [Thu, 20 Jun 2024 17:40:43 +0000 (13:40 -0400)]
drm/amd/display: Add available bandwidth calculation for audio
[Why]
Audio for 8K 240Hz monitor was not available when it should be
[How]
Added calculation based on stream state
Co-developed-by: Ryan Seto <ryanseto@amd.com> Reviewed-by: George Shen <george.shen@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Ryan Seto <ryanseto@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom Chung [Wed, 19 Jun 2024 06:03:55 +0000 (14:03 +0800)]
drm/amd/display: Add refresh rate range check
[Why]
We only enable the VRR while monitor usable refresh rate range
is greater than 10 Hz.
But we did not check the range in DRM_EDID_FEATURE_CONTINUOUS_FREQ
case.
[How]
Add a refresh rate range check before set the freesync_capable flag
in DRM_EDID_FEATURE_CONTINUOUS_FREQ case.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dillon Varone [Wed, 19 Jun 2024 14:05:12 +0000 (10:05 -0400)]
drm/amd/display: Cleanup dce_get_dp_ref_freq_khz
[WHY&HOW]
Cleanup unnecessary code pathes as compile guards were added and removed
overtime.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Hung [Tue, 18 Jun 2024 22:19:48 +0000 (16:19 -0600)]
drm/amd/display: Check denominator crb_pipes before used
[WHAT & HOW]
A denominator cannot be 0, and is checked before used.
This fixes 2 DIVIDE_BY_ZERO issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Hung [Tue, 18 Jun 2024 22:21:20 +0000 (16:21 -0600)]
drm/amd/display: Check denominator pbn_div before used
[WHAT & HOW]
A denominator cannot be 0, and is checked before used.
This fixes 1 DIVIDE_BY_ZERO issue reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nevenko Stupar [Wed, 19 Jun 2024 20:08:41 +0000 (16:08 -0400)]
drm/amd/display: Adjust cursor visibility between MPC slices
[Why & How]
When MPC enabled, need to adjust x and hot spot x
position on one pipe when the cursor is between
MPC slices i.e. when the cursor is moving from one
MPC slice to next slice, while whole cursor size is not
contained within one pipe, to make part of the cursor
to be visible on the other pipe.
Reviewed-by: Sridevi Arvindekar <sridevi.arvindekar@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Nevenko Stupar <nevenko.stupar@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sherry Wang [Thu, 6 Jun 2024 08:51:43 +0000 (16:51 +0800)]
drm/amd/display: Skip unnecessary abm disable
[Why]
We try to disable abm immediately when it's being gradually
disabled, which causes backlight ramping being paused in the
middle
[How]
Don't disable abm immediately if abm has been or is being
disabled through set_abm_level path
Reviewed-by: Anthony Koo <anthony.koo@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Sherry Wang <yao.wang1@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Hung [Sat, 8 Jun 2024 04:09:53 +0000 (22:09 -0600)]
drm/amd/display: Fix possible overflow in integer multiplication
[WHAT & HOW]
Integer multiplies integer may overflow in context that expects an
expression of unsigned/siged long long (64 bits). This can be fixed
by casting integer to unsigned/siged long long to force 64 bits results.
This fixes 26 OVERFLOW_BEFORE_WIDEN issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
George Shen [Mon, 17 Jun 2024 20:32:15 +0000 (16:32 -0400)]
drm/amd/display: Add ASIC cap to limit DCC surface width
[Why]
Certain configurations of DCN401 require ODM4:1 to support DCC for 10K
surfaces. DCC should be conservatively disabled in those cases.
The issue is that current logic limits 10K surface DCC for all
configurations of DCN401.
[How]
Add DC ASIC cap to indicate max surface width that can support DCC.
Disable DCC if this ASIC cap is non-zero and surface width exceeds it.
Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Teeger <gateeger@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sung Joon Kim [Fri, 14 Jun 2024 23:14:31 +0000 (19:14 -0400)]
drm/amd/display: Choose HUBP unbounded request based on DML output
[why]
Previously, we decide on the unbounded request
purely based on pipe_cnt which is a wrong variable
to use to determine how many pipes are in "use".
DML already accounts for number of pipes in use
along with other various factors and is a more reliable
method of determination.
[how]
Use UnboundedRequestEnabledThisState to decide
on unbounbded_req_enabled.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Joshua Aberback [Mon, 17 Jun 2024 19:22:44 +0000 (15:22 -0400)]
drm/amd/display: Remove unnecessary error message
[Why]
This error message is unnecessary because returning when aconnector is
uninitialized is the desired outcome during initialization. As well, there
is no equivalent error message for read_dpcd.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
George Shen [Sat, 15 Jun 2024 01:13:43 +0000 (21:13 -0400)]
drm/amd/display: Fix divide by zero in CURSOR_DST_X_OFFSET calculation
[Why]
Certain situations cause pipes to have a recout of 0, such as when the
dst_rect lies completely outside of a given ODM slice.
[How]
Skip calculation that transforms cursor coordinates to viewport space.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom Chung [Mon, 17 Jun 2024 07:59:06 +0000 (15:59 +0800)]
drm/amd/display: Reset freesync config before update new state
[Why]
Sometimes the new_crtc_state->vrr_infopacket did not sync up with the
current state.
It will affect the update_freesync_state_on_stream() does not update
the state correctly.
[How]
Reset the freesync config before get_freesync_config_for_crtc() to
make sure we have the correct new_crtc_state for VRR.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Sat, 15 Jun 2024 16:51:44 +0000 (12:51 -0400)]
drm/amd/display: Add replay state entry to replay_state
- Add new Replay states 2A (initial Replay entry) and 4E (frame update)
to check is there is new frame update before sending
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 26 Jun 2024 21:35:41 +0000 (17:35 -0400)]
drm/amd/display: use vmalloc for struct dc_state
This is a big structure so use vmalloc as malloc can
fail when there is memory pressure.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3454 Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lucas De Marchi [Fri, 28 Jun 2024 16:17:26 +0000 (09:17 -0700)]
drm/xe/rtp: Fix out-of-bounds array access
Increment the counter before checking for number of rules, otherwise
when there's no XE_RTP_MATCH_OR an out-of-bounds access is done, as
reported by kasan:
BUG: KASAN: global-out-of-bounds in rule_matches+0xb6d/0x11c0 [xe]
Read of size 1 at addr ffffffffa0a50b70 by task systemd-udevd/243
Michal Wajdeczko [Mon, 1 Jul 2024 10:27:37 +0000 (12:27 +0200)]
drm/xe/pf: Restart VFs provisioning after GT reset
Any prior configurations pushed to the GuC are lost when the GT
is reset. Push again all non-empty VF configurations to the GuC
as part of the GuC reset procedure.
This will also help restore early manual provisioning, when the
PF was in the meantime suspended and then resumed.
Michal Wajdeczko [Mon, 1 Jul 2024 10:27:36 +0000 (12:27 +0200)]
drm/xe/pf: Skip fair VFs provisioning if already provisioned
Our debugfs allows to view and change VFs' provisioning configs.
If we attempt to experiment with VFs provisioning before enabling
them, this early config will affect fair provisioning calculations,
and will also be overwritten, which is undesirable behavior.
To improve this, check if the VFs configs are empty (unprovisioned)
before starting the fair provisioning procedure.
Nirmoy Das [Fri, 28 Jun 2024 08:58:45 +0000 (10:58 +0200)]
drm/xe/guc: Configure TLB timeout based on CT buffer size
GuC TLB invalidation depends on GuC to process the request from the CT
queue and then the real time to invalidate TLB. Add a function to return
overestimated possible time a TLB inval H2G might take which can be used
as timeout value for TLB invalidation wait time.
v4: Make sure CTB is in 4K blocks(Michal) and other doc fixes
v3: Pass CT to xe_guc_ct_queue_proc_time_jiffies() (Michal)
Add tlb_timeout_jiffies() that replaces TLB_TIMEOUT(Michal)
v2: Address reviews from Michal.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1622 Cc: Matthew Brost <matthew.brost@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Acked-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240628085845.2369-1-nirmoy.das@intel.com Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Linus Torvalds [Sun, 30 Jun 2024 21:32:24 +0000 (14:32 -0700)]
Merge tag 'ata-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- Add NOLPM quirk for for all Crucial BX SSD1 models.
Considering that we now have had bug reports for 3 different BX SSD1
variants from Crucial with the same product name, make the quirk more
inclusive, to catch more device models from the same generation.
- Fix a trivial NULL pointer dereference in the error path for
ata_host_release().
- Create a ata_port_free(), so that we don't miss freeing ata_port
struct members when freeing a struct ata_port.
- Fix a trivial double free in the error path for ata_host_alloc().
- Ensure that we remove the libata "remapped NVMe device count" sysfs
entry on .probe() error.
* tag 'ata-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: ahci: Clean up sysfs file on error
ata: libata-core: Fix double free on error
ata,scsi: libata-core: Do not leak memory for ata_port struct members
ata: libata-core: Fix null pointer dereference on error
ata: libata-core: Add ATA_HORKAGE_NOLPM for all Crucial BX SSD1 models
Niklas Cassel [Sat, 29 Jun 2024 12:42:14 +0000 (14:42 +0200)]
ata: ahci: Clean up sysfs file on error
.probe() (ahci_init_one()) calls sysfs_add_file_to_group(), however,
if probe() fails after this call, we currently never call
sysfs_remove_file_from_group().
(The sysfs_remove_file_from_group() call in .remove() (ahci_remove_one())
does not help, as .remove() is not called on .probe() error.)
Thus, if probe() fails after the sysfs_add_file_to_group() call, the next
time we insmod the module we will get:
Niklas Cassel [Sat, 29 Jun 2024 12:42:13 +0000 (14:42 +0200)]
ata: libata-core: Fix double free on error
If e.g. the ata_port_alloc() call in ata_host_alloc() fails, we will jump
to the err_out label, which will call devres_release_group().
devres_release_group() will trigger a call to ata_host_release().
ata_host_release() calls kfree(host), so executing the kfree(host) in
ata_host_alloc() will lead to a double free:
Niklas Cassel [Sat, 29 Jun 2024 12:42:12 +0000 (14:42 +0200)]
ata,scsi: libata-core: Do not leak memory for ata_port struct members
libsas is currently not freeing all the struct ata_port struct members,
e.g. ncq_sense_buf for a driver supporting Command Duration Limits (CDL).
Add a function, ata_port_free(), that is used to free a ata_port,
including its struct members. It makes sense to keep the code related to
freeing a ata_port in its own function, which will also free all the
struct members of struct ata_port.
Do not access ata_port struct members unconditionally.
Fixes: 633273a3ed1c ("libata-pmp: hook PMP support and enable it") Cc: stable@vger.kernel.org Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20240629124210.181537-7-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org>
projects / nvme.git / log