Starting from 6.11, AMDGPU driver, while being loaded with amdgpu.dc=1,
due to lack of .is_two_pixels_per_container function in dce60_tg_funcs,
causes a NULL pointer dereference on PCs with old GPUs, such as R9 280X.
So this fix adds missing .is_two_pixels_per_container to dce60_tg_funcs.
Reported-by: Rosen Penev <rosenp@gmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3942 Fixes: e6a901a00822 ("drm/amd/display: use even ODM slice width for two pixels per container") Signed-off-by: Aliaksei Urbanski <aliaksei.urbanski@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shiwu Zhang [Tue, 4 Mar 2025 03:13:48 +0000 (11:13 +0800)]
drm/amdgpu: fix the gb_addr_config_fields init value mismatch
For gfx_v9_4_3 specifically, before regGB_ADDR_CONFIG is overwritten
in gfx hw_init it is read out to popluate the gb_addr_config_fields
in the sw_init stage, which causes mismatch.
Fix it by using the golden value in sw_init as well.
v2: This is a driver-set golden reg and keep as it is (Lijo)
Tao Zhou [Thu, 6 Mar 2025 03:36:49 +0000 (11:36 +0800)]
drm/amdgpu: increase RAS bad page threshold
For default policy, driver will issue an RMA event when the number of
bad pages is greater than 8 physical rows, rather than reaches 8
physical rows, don't rely on threshold configurable parameters in
default mode.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Emily Deng [Mon, 3 Mar 2025 07:10:22 +0000 (15:10 +0800)]
drm/amdgpu: Fix missing drain retry fault the last entry
While the entry get in svm_range_unmap_from_cpu is the last entry, and
the entry is page fault, it also need to be dropped. So for equal case,
it also need to be dropped.
v2:
Only modify the svm_range_restore_pages.
Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Xiaogang Chen<xiaogang.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Victor Lu [Thu, 13 Feb 2025 23:49:46 +0000 (18:49 -0500)]
drm/amdgpu: Do not set power brake sequence for Aldebaran SRIOV
Aldebaran SRIOV VF cannot access the power brake feature regs.
The accesses can be skipped to avoid a dmesg warning.
v2: Remove redundant asic type check
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Victor Lu [Thu, 13 Feb 2025 23:41:26 +0000 (18:41 -0500)]
drm/amdgpu: Do not write to GRBM_CNTL if Aldebaran SRIOV
Aldebaran SRIOV VF does not have write permissions to GRBM_CTNL.
This access can be skipped to avoid a dmesg warning.
v2: Use GC IP version check instead of asic check
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sathishkumar S [Wed, 26 Feb 2025 10:29:47 +0000 (15:59 +0530)]
drm/amdgpu: Fix core reset sequence for JPEG5_0_1
For cores 1 through 9 repair the core reset sequence by
adjusting offsets to access the expected registers.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jonathan Kim [Wed, 26 Feb 2025 19:22:02 +0000 (14:22 -0500)]
drm/amdkfd: flag per-sdma queue reset supported to user space
Similar to compute queue reset, flag SDMA queue reset capabilities to
user space for safe testing.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Harish Kasiviswanathan <harish.kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jonathan Kim [Wed, 15 Jan 2025 20:29:34 +0000 (15:29 -0500)]
drm/amdkfd: implement per queue sdma reset for gfx 9.4+
To reset hung SDMA queues on GFX 9.4+ for the GFX9 family, a soft reset
must be issued through SMU. Since soft resets will reset an entire SDMA
engine, use a common KGD call to do the reset as the KGD will handle
avoiding a reset of in flight GFX and paging queues on that engine.
In addition, create a common call for all reset types to simplify
the handling of module parameter settings that block gpu resets.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Harish Kasiviswanathan <harish.kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Victor Lu [Thu, 13 Feb 2025 23:38:28 +0000 (18:38 -0500)]
drm/amdgpu: Do not program AGP BAR regs under SRIOV in gfxhub_v1_0.c
SRIOV VF does not have write access to AGP BAR regs.
Skip the writes to avoid a dmesg warning.
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sathishkumar S [Wed, 26 Feb 2025 10:18:39 +0000 (15:48 +0530)]
drm/amdgpu: Fix core reset sequence for JPEG4_0_3
For cores 1 through 7 repair the core reset sequence by
adjusting offsets to access the expected registers.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tony Yi [Wed, 26 Feb 2025 22:03:10 +0000 (17:03 -0500)]
drm/amdgpu: Add support for CPERs on virtualization
Add support for CPERs on VFs.
VFs do not receive PMFW messages directly; as such, they need to
query them from the host. To avoid hitting host event guard,
CPER queries need to be rate limited. CPER queries share the same
RAS telemetry buffer as error count query, so a mutex protecting
the shared buffer was added as well.
For readability, the amdgpu_detect_virtualization was refactored
into multiple individual functions.
Signed-off-by: Tony Yi <Tony.Yi@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Zhu [Mon, 3 Mar 2025 18:10:33 +0000 (13:10 -0500)]
drm/amdkfd: remove unnecessary cpu domain validation
before move to GTT domain.
Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aurabindo Pillai [Mon, 24 Feb 2025 19:27:54 +0000 (14:27 -0500)]
drm/amd/display: use drm_* instead of DRM_ in apply_edid_quirks()
drm_* macros are more helpful that DRM_* macros since the former
indicates the associated DRM device that prints the error, which maybe
helpful when debugging.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tony Yi [Wed, 26 Feb 2025 21:56:02 +0000 (16:56 -0500)]
drm/amdgpu: Update headers for CPER support on SRIOV
Update amdgv_sriovmsg.h and mxgpu_nv.h to add new definitions for
CPER support on VFs. PMFW ACA messages are not available on VFs,
and VFs must query CPERs from host.
Signed-off-by: Tony Yi <Tony.Yi@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kenneth Feng [Fri, 28 Feb 2025 09:02:11 +0000 (17:02 +0800)]
drm/amd/pm: always allow ih interrupt from fw
always allow ih interrupt from fw on smu v14 based on
the interface requirement
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lijo Lazar [Wed, 26 Feb 2025 07:23:48 +0000 (12:53 +0530)]
drm/amdgpu: Reinit FW shared flags on VCN v5.0.1
After a full device reset, shared memory region will clear out and it's
not possible to reliably save the region in case of RAS errors.
Reinitialize the flags if required.
Andrew Martin [Fri, 28 Feb 2025 16:26:48 +0000 (11:26 -0500)]
drm/amdkfd: Fix NULL Pointer Dereference in KFD queue
Through KFD IOCTL Fuzzing we encountered a NULL pointer derefrence
when calling kfd_queue_acquire_buffers.
Fixes: 629568d25fea ("drm/amdkfd: Validate queue cwsr area and eop buffer size") Signed-off-by: Andrew Martin <Andrew.Martin@amd.com> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Andrew Martin <Andrew.Martin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Asad Kamal [Thu, 27 Feb 2025 12:09:16 +0000 (20:09 +0800)]
drm/amdgpu: Set PG state to gating for vcn_v_5_0_1
For vcn_v_5_0_1, set power state to gating during hw fini. Also there may
be scenario where VCN engine hangs during a job execution, then it's not
safe to assume that set_pg_state works fine during hw_fini to put the state
to gated. After a reset, we can assume that it's in the default state,
therefore reset the driver maintained state. Put the default state as gated
during reset as per this assumption.
Signed-off-by: Asad Kamal <asad.kamal@amd.com> Suggested-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dr. David Alan Gilbert [Mon, 3 Mar 2025 14:39:19 +0000 (14:39 +0000)]
drm/amdgpu: Remove powerdown_uvd member
With phm_powerdown_uvd() gone in the previous patch, there's
now no longer anything that reads the powerdown_uvd member of the
pp_hwmgr_func.
Remove it.
There are a few assignments to it; a boring NULL which can just go,
and two functions, but those functions are called explicitly anyway
so the assignments to the member go.
One of those (smu7_powerdown_uvd) wasn't static previously;
make it static.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dr. David Alan Gilbert [Mon, 3 Mar 2025 14:39:17 +0000 (14:39 +0000)]
drm/amdgpu: Remove ppatomfwctrl deadcode
pp_atomfwctrl_get_pp_assign_pin() and pp_atomfwctrl_get_pp_assign_pin()
were added in 2017 by
commit 0d2c7569e196 ("drm/amdgpu: add new atomfirmware based helpers for
powerplay")
but have remained unused.
Remove them, and the helper functions they used.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Richard Thier [Mon, 17 Jun 2019 21:46:27 +0000 (23:46 +0200)]
drm/radeon: Fix rs400_gpu_init for ATI mobility radeon Xpress 200M
num_gb_pipes was set to a wrong value using r420_pipe_config
This have lead to HyperZ glitches on fast Z clearing.
Closes: https://bugs.freedesktop.org/show_bug.cgi?id=110897 Reviewed-by: Marek Olšák <marek.olsak@amd.com> Signed-off-by: Richard Thier <u9vata@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Fri, 28 Feb 2025 18:51:45 +0000 (12:51 -0600)]
drm/amd/display: Add a new dcdebugmask to allow turning off brightness curve
Upgrading the kernel may cause some systems that were previously not using
a firmware specified brightness curve to use one.
In the event of problems with this curve (for example an interpolation
error) add a new dcdebugmask value that can be used to turn it off. Also
add an info message to show that custom brightness curves are currently in
use.
Mario Limonciello [Fri, 28 Feb 2025 18:51:44 +0000 (12:51 -0600)]
drm/amd/display: Add support for custom brightness curve
Some systems specify in the firmware a brightness curve that better
reflects the characteristics of the panel used. This is done in the
form of data points and matching luminance percentage.
When converting a userspace requested brightness value use that curve
to convert to a firmware intended brightness value.
Taimur Hassan [Mon, 24 Feb 2025 01:39:00 +0000 (20:39 -0500)]
drm/amd/display: Promote DAL to 3.2.323
This version brings along following fixes:
- Various cleanups to amdgpu dm
- Add DP tunneling IRQ handler
- Fix display corruption for dcn35
- Fix dmcub reset problem
- Adjust BW determination for PCON
- DIO encoder refactor
- Fix performance with SubVP under gaming
Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Tue, 18 Feb 2025 04:58:40 +0000 (22:58 -0600)]
drm/amd/display: Use drm_err() for handle_hpd_irq_helper()
drm_err() will show which device has the error.
Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Tue, 18 Feb 2025 04:58:39 +0000 (22:58 -0600)]
drm/amd/display: Use scoped guards for handle_hpd_irq_helper()
Scoped guards will release the mutex when they go out of scope.
Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Tue, 18 Feb 2025 04:58:38 +0000 (22:58 -0600)]
drm/amd/display: Use _free() macro for amdgpu_dm_update_connector_after_detect()
By using a _free() macro multiple duplicated snippets of code to free
the sink can be dropped. The sink will be released when leaving scope.
Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Tue, 18 Feb 2025 04:58:37 +0000 (22:58 -0600)]
drm/amd/display: Use scoped guard for amdgpu_dm_update_connector_after_detect()
A scoped guard will release the mutex when it goes out of scope.
Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Tue, 18 Feb 2025 04:58:36 +0000 (22:58 -0600)]
drm/amd/display: Use _free(kfree) for dm_gpureset_commit_state()
Using a _free(kfree) macro drops the need for a goto statement
as it will be freed when it goes out of scope.
Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Tue, 18 Feb 2025 04:58:35 +0000 (22:58 -0600)]
drm/amd/display: Change amdgpu_dm_irq_resume_*() to void
amdgpu_dm_irq_resume_early() and amdgpu_dm_irq_resume_late() don't
have any error flows. Change the return type from integer to void.
Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Tue, 18 Feb 2025 04:58:34 +0000 (22:58 -0600)]
drm/amd/display: Change amdgpu_dm_irq_resume_*() to use drm_dbg()
drm_dbg() is helpful to show which device had the debug statement.
Adjust to using this instead for debug messages.
Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Tue, 18 Feb 2025 04:58:33 +0000 (22:58 -0600)]
drm/amd/display: Use scoped guard for dm_resume()
Scoped guards will release the mutex when they go out of scope.
Adjust the code to use these instead.
Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Tue, 18 Feb 2025 04:58:32 +0000 (22:58 -0600)]
drm/amd/display: Use drm_err() instead of DRM_ERROR in dm_resume()
drm_err() is helpful to show which device had the error. Adjust to
using this instead for error messages.
Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Tue, 18 Feb 2025 04:58:31 +0000 (22:58 -0600)]
drm/amd/display: Use _free() macro for amdgpu_dm_commit_zero_streams()
All cases except a failure to create a copy of the current context will
call dc_state_release() on the copied context.
Use a _free() macro to free the context and then adjust the error handling
flow to drop the unnecessary use of goto statements.
Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Tue, 18 Feb 2025 04:58:30 +0000 (22:58 -0600)]
drm/amd/display: Catch failures for amdgpu_dm_commit_zero_streams()
amdgpu_dm_commit_zero_streams() returns a DC error code that isn't
checked. Add an explicit check to this and fail dm_suspend() if it
is not DC_OK.
Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Tue, 18 Feb 2025 04:58:29 +0000 (22:58 -0600)]
drm/amd/display: Drop `ret` variable from dm_suspend()
The `ret` variable in dm_suspend() doesn't get set and is just used
to return 0. Drop the needless declaration.
Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Tue, 18 Feb 2025 04:58:28 +0000 (22:58 -0600)]
drm/amd/display: Change amdgpu_dm_irq_suspend() to void
amdgpu_dm_irq_suspend() doesn't have any error flows and always
returns zero.
Change the function to void.
Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cruise Hung [Thu, 20 Feb 2025 03:29:50 +0000 (11:29 +0800)]
drm/amd/display: Add tunneling IRQ handler
USB4 DP BW Allocation uses DP_TUNNELING_IRQ to indicate the status update.
The DP_TUNNELING_IRQ is defined in LINK_SERVICE_IRQ_VECTOR_ESI0. When
receiving DP HPD IRQ in USB4, read the LINK_SERVICE_IRQ_VECTOR_ESI0.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Cruise Hung <Cruise.Hung@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Zeng [Wed, 19 Feb 2025 15:29:39 +0000 (10:29 -0500)]
drm/amd/display: Added visual confirm for DCC
[WHY]
We want to add a visual confirm mode for DCC and MCache for
debugging purpose.
[HOW]
color pipes based on whether DCC is enabled and what MCache id
is used.
black - DCC disabled
red - DCC enabled
grey - 2 different MCaches used
other colors - 1 MCache used
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Leo Zeng <Leo.Zeng@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Wed, 19 Feb 2025 14:56:53 +0000 (09:56 -0500)]
drm/amd/display: Ensure DMCUB idle before reset on DCN31/DCN35
[Why]
If we soft reset before halt finishes and there are outstanding
memory transactions then the memory interface may produce unexpected
results, such as out of order transactions when the firmware next runs.
These can manifest as random or unexpected load/store violations.
[How]
Increase the timeout before soft reset to ensure the DMCUB has quiesced.
This is effectively 1s maximum based on experimentation.
Use the enable bit check on DCN31 like we're doing on DCN35 and reorder
the reset writes to follow the HW programming guide.
Ensure we're reading SCRATCH7 instead of SCRATCH8 for the HALT code.
No current versions of DMCUB firmware use the SCRATCH8 boot bit to
dynamically switch where the HALT code goes to maintain backwards
compatibility with PSP.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Wed, 19 Feb 2025 14:46:55 +0000 (09:46 -0500)]
drm/amd/display: Revert "Increase halt timeout for DMCUB to 1s"
This reverts commit 50f040c53ea9 ("drm/amd/display: Increase halt
timeout for DMCUB to 1s")
There's two issues here:
1. Each poll is closer to 10us than 1us so it stalls for 15s on PNP.
2. We're reading the wrong scratch register to check for the HALT code.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Hung [Wed, 19 Feb 2025 04:14:47 +0000 (21:14 -0700)]
drm/amd/display: Check NULL connector before it is used
[Why & How]
amdgpu_dm_find_first_crtc_matching_connector can return NULL.
It is necessary to the returned connector before passing it
drm_atomic_get_new_connector_state which always assumes connector is
not NULL.
Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
George Shen [Fri, 14 Feb 2025 15:57:08 +0000 (10:57 -0500)]
drm/amd/display: Remove unused struct definition
[Why/How]
The struct is not and will not be used, as it is no longer relevant nor
supported.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
George Shen [Sat, 15 Feb 2025 03:00:13 +0000 (22:00 -0500)]
drm/amd/display: Skip checking FRL_MODE bit for PCON BW determination
[Why/How]
Certain PCON will clear the FRL_MODE bit despite supporting the link BW
indicated in the other bits.
Thus, skip checking the FRL_MODE bit when interpreting the
hdmi_encoded_link_bw struct.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Peichen Huang [Tue, 11 Feb 2025 06:41:11 +0000 (14:41 +0800)]
drm/amd/display: misc for dio encoder refactor
[WHY]
These are left required changes for dio encoder refactor.
[HOW]
1. original logic is separated by config option
2. new link encoder dp enable/disable code for dcn35
3. process fec only for DP 8b10b encoding
Reviewed-by: Cruise Hung <cruise.hung@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hansen Dsouza [Fri, 24 Jan 2025 20:12:37 +0000 (15:12 -0500)]
drm/amd/display: read mso dpcd caps
[Why & How]
Read if panel support multi-sst links
Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dillon Varone [Thu, 13 Feb 2025 18:10:41 +0000 (13:10 -0500)]
drm/amd/display: Fix DMUB reset sequence for DCN401
[WHY]
It should no longer use DMCUB_SOFT_RESET as it can result
in the memory request path becoming desynchronized.
[HOW]
To ensure robustness in the reset sequence:
1) Extend timeout on the "halt" command sent via gpint, and check for
controller to enter "wait" as a stronger guarantee that there are no
requests to memory still in flight.
2) Remove usage of DMCUB_SOFT_RESET
3) Rely on PSP to reset the controller safely
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dillon Varone [Wed, 12 Feb 2025 22:06:42 +0000 (17:06 -0500)]
drm/amd/display: Fix p-state type when p-state is unsupported
[WHY&HOW]
P-state type would remain on previously used when unsupported which
causes confusion in logging and visual confirm, so set back to zero
when unsupported.
Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Thu, 23 Jan 2025 21:39:52 +0000 (16:39 -0500)]
drm/amd/display: Request HW cursor on DCN3.2 with SubVP
[why]
When SubVP is active the HW cursor size is limited to 64x64, and
anything larger will force composition which is bad for gaming on
DCN3.2 if the game uses a larger cursor.
[how]
If HW cursor is requested, typically by a fullscreen game, do not
enable SubVP so that up to 256x256 cursor sizes are available for
DCN3.2.
Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Aric Cyr <Aric.Cyr@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Vitaliy Shevtsov [Wed, 26 Feb 2025 20:28:51 +0000 (01:28 +0500)]
drm/amd/display: fix type mismatch in CalculateDynamicMetadataParameters()
There is a type mismatch between what CalculateDynamicMetadataParameters()
takes and what is passed to it. Currently this function accepts several
args as signed long but it's called with unsigned integers and integer. On
some systems where long is 32 bits and one of these unsigned int params is
greater than INT_MAX it may cause passing input params as negative values.
Fix this by changing these argument types from long to unsigned int and to
int respectively. Also this will align the function's definition with
similar functions in other dcn* drivers.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: 6725a88f88a7 ("drm/amd/display: Add DCN3 DML") Signed-off-by: Vitaliy Shevtsov <v.shevtsov@mt-integration.ru> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jesse.zhang@amd.com [Thu, 13 Feb 2025 05:33:34 +0000 (13:33 +0800)]
drm/amdgpu: Update SDMA scheduler mask handling to include page queue
This patch updates the SDMA scheduler mask handling to include the page queue
if it exists. The scheduler mask is calculated based on the number of SDMA
instances and the presence of the page queue. The mask is updated to reflect
the state of both the SDMA gfx ring and the page queue.
Changes:
- Add handling for the SDMA page queue in `amdgpu_debugfs_sdma_sched_mask_set`.
- Update scheduler mask calculations to include the page queue.
- Modify `amdgpu_debugfs_sdma_sched_mask_get` to return the correct mask value.
This change is necessary to verify multiple queues (SDMA gfx queue + page queue)
and ensure proper scheduling and state management for SDMA instances.
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Wed, 26 Feb 2025 01:50:51 +0000 (07:20 +0530)]
drm/amdgpu: Fix parameter annotation in vcn_v5_0_0_is_idle
Update parameter description in the vcn_v5_0_0_is_idle function
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/vcn_v5_0_0.c:1231: warning: Function parameter or struct member 'ip_block' not described in 'vcn_v5_0_0_is_idle'
drivers/gpu/drm/amd/amdgpu/vcn_v5_0_0.c:1231: warning: Excess function parameter 'handle' description in 'vcn_v5_0_0_is_idle'
Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Mon, 10 Feb 2025 14:42:31 +0000 (09:42 -0500)]
drm/amdkfd: debugfs hang_hws skip GPU with MES
debugfs hang_hws is used by GPU reset test with HWS, for MES this crash
the kernel with NULL pointer access because dqm->packet_mgr is not setup
for MES path.
Skip GPU with MES for now, MES hang_hws debugfs interface will be
supported later.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Thu, 20 Feb 2025 21:02:13 +0000 (16:02 -0500)]
drm/amdkfd: Fix pqm_destroy_queue race with GPU reset
If GPU in reset, destroy_queue return -EIO, pqm_destroy_queue should
delete the queue from process_queue_list and free the resource.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Srinivasan Shanmugam [Wed, 26 Feb 2025 01:40:38 +0000 (07:10 +0530)]
drm/amdgpu: Fix parameter annotations for VCN clock gating functions
The previous references to a non-existent `adev` parameter have been
removed & corrected to reflect the use of the `vinst` pointer, which
points to the VCN instance structure, in the below files:
- vcn_v1_0.c
- vcn_v2_0.c
- vcn_v3_0.c
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c:624: warning: Function parameter or struct member 'vinst' not described in 'vcn_v1_0_enable_clock_gating'
drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c:624: warning: Excess function parameter 'adev' description in 'vcn_v1_0_enable_clock_gating'
drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:376: warning: Function parameter or struct member 'vinst' not described in 'vcn_v2_0_mc_resume'
drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:376: warning: Excess function parameter 'adev' description in 'vcn_v2_0_mc_resume'
drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c:776: warning: Function parameter or struct member 'vinst' not described in 'vcn_v3_0_disable_clock_gating'
drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c:776: warning: Excess function parameter 'adev' description in 'vcn_v3_0_disable_clock_gating'
drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c:776: warning: Excess function parameter 'inst' description in 'vcn_v3_0_disable_clock_gating'
drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c:965: warning: Function parameter or struct member 'vinst' not described in 'vcn_v3_0_enable_clock_gating'
drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c:965: warning: Excess function parameter 'adev' description in 'vcn_v3_0_enable_clock_gating'
drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c:965: warning: Excess function parameter 'inst' description in 'vcn_v3_0_enable_clock_gating'
Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Thu, 6 Feb 2025 22:50:13 +0000 (17:50 -0500)]
drm/amdkfd: Fix mode1 reset crash issue
If HW scheduler hangs and mode1 reset is used to recover GPU, KFD signal
user space to abort the processes. After process abort exit, user queues
still use the GPU to access system memory before h/w is reset while KFD
cleanup worker free system memory and free VRAM.
There is use-after-free race bug that KFD allocate and reuse the freed
system memory, and user queue write to the same system memory to corrupt
the data structure and cause driver crash.
To fix this race, KFD cleanup worker terminate user queues, then flush
reset_domain wq to wait for any GPU ongoing reset complete, and then
free outstanding BOs.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To fix this, KFD create process move flush release work outside
kfd_process_mutex.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With GPU reset-domain worker implemented, KFD hw_exception worker is not
needed any more, just call amdgpu_amdkfd_gpu_reset directly from
kfd_hws_hang.
Suggested-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lijo Lazar [Thu, 6 Feb 2025 11:54:51 +0000 (17:24 +0530)]
drm/amdgpu: Add xgmi speed/width related info
Add APIs to initialize XGMI speed, width details and get to max
bandwidth supported. It is assumed that a device only supports same
generation of XGMI links with uniform width.
Kenneth Feng [Thu, 27 Feb 2025 02:13:53 +0000 (10:13 +0800)]
drm/amd/pm: add fan abnormal detection
add fan abnormal detection on smu v14.0.2&smu v14.0.3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Yat Sin [Tue, 25 Feb 2025 23:08:02 +0000 (18:08 -0500)]
drm/amdkfd: clamp queue size to minimum
If queue size is less than minimum, clamp it to minimum to prevent
underflow when writing queue mqd.
Signed-off-by: David Yat Sin <David.YatSin@amd.com> Reviewed-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
André Almeida [Wed, 26 Feb 2025 13:11:18 +0000 (10:11 -0300)]
drm/amdgpu: Create a debug option to disable ring reset
Prior to the addition of ring reset, the debug option
`debug_disable_soft_recovery` could be used to force a full device
reset. Now that we have ring reset, create a debug option to disable
them in amdgpu, forcing the driver to go with the full device
reset path again when both options are combined.
This option is useful for testing and debugging purposes when one wants
to test the full reset from userspace.
Signed-off-by: André Almeida <andrealmeid@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ma Ke [Wed, 26 Feb 2025 08:37:31 +0000 (16:37 +0800)]
drm/amd/display: Fix null check for pipe_ctx->plane_state in resource_build_scaling_params
Null pointer dereference issue could occur when pipe_ctx->plane_state
is null. The fix adds a check to ensure 'pipe_ctx->plane_state' is not
null before accessing. This prevents a null pointer dereference.
Found by code review.
Fixes: 3be5262e353b ("drm/amd/display: Rename more dc_surface stuff to plane_state") Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ma Ke <make24@iscas.ac.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 20 Feb 2025 15:42:30 +0000 (10:42 -0500)]
drm/amdgpu/mes11: drop amdgpu_mes_suspend()/amdgpu_mes_resume() calls
They are noops on GFX11 for most firmware versions. KFD already
handles its own queues and they should already be unmapped at this
point so even if this runs, it's not doing anything.
Reviewed-by: Shaoyun.liu <Shaoyun.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Colin Ian King [Wed, 26 Feb 2025 08:57:33 +0000 (08:57 +0000)]
drm/amdgpu: Fix spelling mistake "initiailize" -> "initialize" and grammar
There is a spelling mistake and a grammatical error in a dev_err
message. Fix it.
Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Le Ma [Tue, 11 Feb 2025 06:06:54 +0000 (14:06 +0800)]
drm/amdgpu: add sdma page queue irq processing for sdma442
Add the trap irq processing for page queue of sdma442
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by and Tested-by: Jesse Zhang <jesse.zhang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / users / hch / misc.git / log