Laurent Vivier [Wed, 21 May 2025 09:22:35 +0000 (11:22 +0200)]
virtio_net: Cleanup '2+MAX_SKB_FRAGS'
Improve consistency by using everywhere it is needed
'MAX_SKB_FRAGS + 2' rather than '2+MAX_SKB_FRAGS' or
'2 + MAX_SKB_FRAGS'.
No functional change.
Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20250521092236.661410-3-lvivier@redhat.com Tested-by: Lei Yang <leiyang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Laurent Vivier [Wed, 21 May 2025 09:22:34 +0000 (11:22 +0200)]
virtio_ring: Fix error reporting in virtqueue_resize
The virtqueue_resize() function was not correctly propagating error codes
from its internal resize helper functions, specifically
virtqueue_resize_packet() and virtqueue_resize_split(). If these helpers
returned an error, but the subsequent call to virtqueue_enable_after_reset()
succeeded, the original error from the resize operation would be masked.
Consequently, virtqueue_resize() could incorrectly report success to its
caller despite an underlying resize failure.
This change restores the original code behavior:
if (vdev->config->enable_vq_after_reset(_vq))
return -EBUSY;
return err;
Fix: commit ad48d53b5b3f ("virtio_ring: separate the logic of reset/enable from virtqueue_resize") Cc: xuanzhuo@linux.alibaba.com Signed-off-by: Laurent Vivier <lvivier@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20250521092236.661410-2-lvivier@redhat.com Tested-by: Lei Yang <leiyang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When calling buf_to_xdp, the len argument is the frame data's length
without virtio header's length (vi->hdr_len). We check that len with
xsk_pool_get_rx_frame_size() + vi->hdr_len
to ensure the provided len does not larger than the allocated chunk
size. The additional vi->hdr_len is because in virtnet_add_recvbuf_xsk,
we use part of XDP_PACKET_HEADROOM for virtio header and ask the vhost
to start placing data from
hard_start + XDP_PACKET_HEADROOM - vi->hdr_len
not
hard_start + XDP_PACKET_HEADROOM
But the first buffer has virtio_header, so the maximum frame's length in
the first buffer can only be
xsk_pool_get_rx_frame_size()
not
xsk_pool_get_rx_frame_size() + vi->hdr_len
like in the current check.
This commit adds an additional argument to buf_to_xdp differentiate
between the first buffer and other ones to correctly calculate the maximum
frame's length.
Cc: stable@vger.kernel.org Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Fixes: a4e7ba702701 ("virtio_net: xsk: rx: support recv small mode") Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com> Link: https://patch.msgid.link/20250630151315.86722-2-minhquangbui99@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
====================
virtio-net: fixes for mergeable XDP receive path
This series contains fixes for XDP receive path in virtio-net
- Patch 1: add a missing check for the received data length with our
allocated buffer size in mergeable mode.
- Patch 2: remove a redundant truesize check with PAGE_SIZE in mergeable
mode
- Patch 3: make the current repeated code use the check_mergeable_len to
check for received data length in mergeable mode
====================
virtio-net: remove redundant truesize check with PAGE_SIZE
The truesize is guaranteed not to exceed PAGE_SIZE in
get_mergeable_buf_len(). It is saved in mergeable context, which is not
changeable by the host side, so the check in receive path is quite
redundant.
virtio-net: ensure the received length does not exceed allocated size
In xdp_linearize_page, when reading the following buffers from the ring,
we forget to check the received length with the true allocate size. This
can lead to an out-of-bound read. This commit adds that missing check.
Cc: <stable@vger.kernel.org> Fixes: 4941d472bf95 ("virtio-net: do not reset during XDP set") Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20250630144212.48471-2-minhquangbui99@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski [Wed, 2 Jul 2025 21:52:25 +0000 (14:52 -0700)]
Merge branch '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-07-01 (idpf, igc)
For idpf:
Michal returns 0 for key size when RSS is not supported.
Ahmed changes control queue to a spinlock due to sleeping calls.
For igc:
Vitaly disables L1.2 PCI-E link substate on I226 devices to resolve
performance issues.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: disable L1.2 PCI-E link substate to avoid performance issue
idpf: convert control queue mutex to a spinlock
idpf: return 0 size for RSS key if not supported
====================
Antoine Tenart [Tue, 1 Jul 2025 07:49:34 +0000 (09:49 +0200)]
net: ipv4: fix stat increase when udp early demux drops the packet
udp_v4_early_demux now returns drop reasons as it either returns 0 or
ip_mc_validate_source, which returns itself a drop reason. However its
use was not converted in ip_rcv_finish_core and the drop reason is
ignored, leading to potentially skipping increasing LINUX_MIB_IPRPFILTER
if the drop reason is SKB_DROP_REASON_IP_RPFILTER.
This is a fix and we're not converting udp_v4_early_demux to explicitly
return a drop reason to ease backports; this can be done as a follow-up.
Fixes: d46f827016d8 ("net: ip: make ip_mc_validate_source() return drop reason") Cc: Menglong Dong <menglong8.dong@gmail.com> Reported-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://patch.msgid.link/20250701074935.144134-1-atenart@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: libwx: fix the incorrect display of the queue number
When setting "ethtool -L eth0 combined 1", the number of RX/TX queue is
changed to be 1. RSS is disabled at this moment, and the indices of FDIR
have not be changed in wx_set_rss_queues(). So the combined count still
shows the previous value. This issue was introduced when supporting
FDIR. Fix it for those devices that support FDIR.
The link status is latched low so that momentary link drops
can be detected. Always double-reading the status defeats this
design feature. Only double read if link was already down
This prevents unnecessary duplicate readings of the link status.
Fixes: 4f3b20bfbb75 ("amd-xgbe: add support for rx-adaptation") Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250701065016.4140707-1-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lion Ackermann [Mon, 30 Jun 2025 13:27:30 +0000 (15:27 +0200)]
net/sched: Always pass notifications when child class becomes empty
Certain classful qdiscs may invoke their classes' dequeue handler on an
enqueue operation. This may unexpectedly empty the child qdisc and thus
make an in-flight class passive via qlen_notify(). Most qdiscs do not
expect such behaviour at this point in time and may re-activate the
class eventually anyways which will lead to a use-after-free.
The referenced fix commit attempted to fix this behavior for the HFSC
case by moving the backlog accounting around, though this turned out to
be incomplete since the parent's parent may run into the issue too.
The following reproducer demonstrates this use-after-free:
tc qdisc add dev lo root handle 1: drr
tc filter add dev lo parent 1: basic classid 1:1
tc class add dev lo parent 1: classid 1:1 drr
tc qdisc add dev lo parent 1:1 handle 2: hfsc def 1
tc class add dev lo parent 2: classid 2:1 hfsc rt m1 8 d 1 m2 0
tc qdisc add dev lo parent 2:1 handle 3: netem
tc qdisc add dev lo parent 3:1 handle 4: blackhole
echo 1 | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888
tc class delete dev lo classid 1:1
echo 1 | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888
Since backlog accounting issues leading to a use-after-frees on stale
class pointers is a recurring pattern at this point, this patch takes
a different approach. Instead of trying to fix the accounting, the patch
ensures that qdisc_tree_reduce_backlog always calls qlen_notify when
the child qdisc is empty. This solves the problem because deletion of
qdiscs always involves a call to qdisc_reset() and / or
qdisc_purge_queue() which ultimately resets its qlen to 0 thus causing
the following qdisc_tree_reduce_backlog() to report to the parent. Note
that this may call qlen_notify on passive classes multiple times. This
is not a problem after the recent patch series that made all the
classful qdiscs qlen_notify() handlers idempotent.
Fixes: 3f981138109f ("sch_hfsc: Fix qlen accounting bug when using peek in hfsc_enqueue()") Signed-off-by: Lion Ackermann <nnamrec@gmail.com> Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/d912cbd7-193b-4269-9857-525bee8bbb6a@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Thomas Fourier [Mon, 30 Jun 2025 08:36:43 +0000 (10:36 +0200)]
nui: Fix dma_mapping_error() check
dma_map_XXX() functions return values DMA_MAPPING_ERROR as error values
which is often ~0. The error value should be tested with
dma_mapping_error().
This patch creates a new function in niu_ops to test if the mapping
failed. The test is fixed in niu_rbr_add_page(), added in
niu_start_xmit() and the successfully mapped pages are unmaped upon error.
Fixes: ec2deec1f352 ("niu: Fix to check for dma mapping errors.") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Kohei Enju [Sun, 29 Jun 2025 03:06:31 +0000 (12:06 +0900)]
rose: fix dangling neighbour pointers in rose_rt_device_down()
There are two bugs in rose_rt_device_down() that can cause
use-after-free:
1. The loop bound `t->count` is modified within the loop, which can
cause the loop to terminate early and miss some entries.
2. When removing an entry from the neighbour array, the subsequent entries
are moved up to fill the gap, but the loop index `i` is still
incremented, causing the next entry to be skipped.
For example, if a node has three neighbours (A, A, B) with count=3 and A
is being removed, the second A is not checked.
i=0: (A, A, B) -> (A, B) with count=2
^ checked
i=1: (A, B) -> (A, B) with count=2
^ checked (B, not A!)
i=2: (doesn't occur because i < count is false)
This leaves the second A in the array with count=2, but the rose_neigh
structure has been freed. Code that accesses these entries assumes that
the first `count` entries are valid pointers, causing a use-after-free
when it accesses the dangling pointer.
Fix both issues by iterating over the array in reverse order with a fixed
loop bound. This ensures that all entries are examined and that the removal
of an entry doesn't affect subsequent iterations.
Alok Tiwari [Sat, 28 Jun 2025 14:56:05 +0000 (07:56 -0700)]
enic: fix incorrect MTU comparison in enic_change_mtu()
The comparison in enic_change_mtu() incorrectly used the current
netdev->mtu instead of the new new_mtu value when warning about
an MTU exceeding the port MTU. This could suppress valid warnings
or issue incorrect ones.
Fix the condition and log to properly reflect the new_mtu.
Fixes: ab123fe071c9 ("enic: handle mtu change for vf properly") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Acked-by: John Daley <johndale@cisco.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250628145612.476096-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Raju Rangoju [Mon, 30 Jun 2025 19:26:36 +0000 (00:56 +0530)]
amd-xgbe: align CL37 AN sequence as per databook
Update the Clause 37 Auto-Negotiation implementation to properly align
with the PCS hardware specifications:
- Fix incorrect bit settings in Link Status and Link Duplex fields
- Implement missing sequence steps 2 and 7
These changes ensure CL37 auto-negotiation protocol follows the exact
sequence patterns as specified in the hardware databook.
Dan Carpenter [Mon, 30 Jun 2025 19:36:40 +0000 (14:36 -0500)]
lib: test_objagg: Set error message in check_expect_hints_stats()
Smatch complains that the error message isn't set in the caller:
lib/test_objagg.c:923 test_hints_case2()
error: uninitialized symbol 'errmsg'.
This static checker warning only showed up after a recent refactoring
but the bug dates back to when the code was originally added. This
likely doesn't affect anything in real life.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/r/202506281403.DsuyHFTZ-lkp@intel.com/ Fixes: 0a020d416d0a ("lib: introduce initial implementation of object aggregation manager") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/8548f423-2e3b-4bb7-b816-5041de2762aa@sabinyo.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vitaly Lifshits [Wed, 11 Jun 2025 12:52:54 +0000 (15:52 +0300)]
igc: disable L1.2 PCI-E link substate to avoid performance issue
I226 devices advertise support for the PCI-E link L1.2 substate. However,
due to a hardware limitation, the exit latency from this low-power state
is longer than the packet buffer can tolerate under high traffic
conditions. This can lead to packet loss and degraded performance.
To mitigate this, disable the L1.2 substate. The increased power draw
between L1.1 and L1.2 is insignificant.
Fixes: 43546211738e ("igc: Add new device ID's") Link: https://lore.kernel.org/intel-wired-lan/15248b4f-3271-42dd-8e35-02bfc92b25e1@intel.com Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The sequence is as follows:
rtnl_newlink()->
__dev_change_flags()->
__dev_open()->
dev_set_rx_mode() - > # disables BH and grabs "dev->addr_list_lock"
idpf_set_rx_mode() -> # proceed only if VIRTCHNL2_CAP_MACFILTER is ON
__dev_uc_sync() ->
idpf_add_mac_filter ->
idpf_add_del_mac_filters ->
idpf_send_mb_msg() ->
idpf_mb_clean() ->
idpf_ctlq_clean_sq() # mutex_lock(cq_lock)
Fix by converting cq_lock to a spinlock. All operations under the new
lock are safe except freeing the DMA memory, which may use vunmap(). Fix
by requesting a contiguous physical memory for the DMA mapping.
Fixes: a251eee62133 ("idpf: add SRIOV support and other ndo_ops") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jakub Kicinski [Tue, 1 Jul 2025 01:58:47 +0000 (18:58 -0700)]
Merge tag 'for-net-2025-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- MGMT: set_mesh: update LE scan interval and window
- MGMT: mesh_send: check instances prior disabling advertising
- hci_sync: revert some mesh modifications
- hci_sync: Set extended advertising data synchronously
- hci_sync: Prevent unintended pause by checking if advertising is active
* tag 'for-net-2025-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: HCI: Set extended advertising data synchronously
Bluetooth: MGMT: mesh_send: check instances prior disabling advertising
Bluetooth: MGMT: set_mesh: update LE scan interval and window
Bluetooth: hci_sync: revert some mesh modifications
Bluetooth: Prevent unintended pause by checking if advertising is active
====================
Lukas Bulwahn [Fri, 27 Jun 2025 13:44:53 +0000 (15:44 +0200)]
MAINTAINERS: adjust file entry after renaming rzv2h-gbeth dtb
Commit d53320aeef18 ("dt-bindings: net: Rename
renesas,r9a09g057-gbeth.yaml") renames the net devicetree binding
renesas,r9a09g057-gbeth.yaml to renesas,rzv2h-gbeth.yaml, but misses to
adjust the file entry in the RENESAS RZ/V2H(P) DWMAC GBETH GLUE LAYER
DRIVER section in MAINTAINERS.
Oleksij Rempel [Fri, 27 Jun 2025 05:13:46 +0000 (07:13 +0200)]
net: usb: lan78xx: fix WARN in __netif_napi_del_locked on disconnect
Remove redundant netif_napi_del() call from disconnect path.
A WARN may be triggered in __netif_napi_del_locked() during USB device
disconnect:
WARNING: CPU: 0 PID: 11 at net/core/dev.c:7417 __netif_napi_del_locked+0x2b4/0x350
This happens because netif_napi_del() is called in the disconnect path while
NAPI is still enabled. However, it is not necessary to call netif_napi_del()
explicitly, since unregister_netdev() will handle NAPI teardown automatically
and safely. Removing the redundant call avoids triggering the warning.
Jiawen Wu [Thu, 26 Jun 2025 08:51:53 +0000 (16:51 +0800)]
net: txgbe: fix the issue of TX failure
There is a occasional problem that ping is failed between AML devices.
That is because the manual enablement of the security Tx path on the
hardware is missing, no matter what its previous state was.
Mark Bloch [Fri, 27 Jun 2025 01:42:52 +0000 (18:42 -0700)]
MAINTAINERS: Add myself as mlx5 core and mlx5e co-maintainer
I have been working on mlx5 related code for several years,
contributing features, code reviews, and occasional maintainer tasks
when needed. This patch makes my maintainer role official.
The `dma_map_XXX()` functions can fail and must be checked using
`dma_mapping_error()`. This patch adds proper error handling for all
DMA mapping calls.
In `atl1_alloc_rx_buffers()`, if DMA mapping fails, the buffer is
deallocated and marked accordingly.
In `atl1_tx_map()`, previously mapped buffers are unmapped and the
packet is dropped on failure.
If `atl1_xmit_frame()` drops the packet, increment the tx_error counter.
Ulrich Weber [Thu, 26 Jun 2025 14:56:18 +0000 (16:56 +0200)]
doc: tls: socket needs to be established to enable ulp
To enable TLS ulp socket needs to be in established state.
This was added in commit d91c3e17f75f ("net/tls: Only attach
to sockets in ESTABLISHED state"), in 2018.
Jakub Kicinski [Thu, 26 Jun 2025 18:20:55 +0000 (11:20 -0700)]
docs: netdev: correct the heading level for co-posting selftests
"Co-posting selftests" belongs in the "netdev patch review" section,
same as "co-posting changes to user space components". It was
erroneously added as its own section.
Jan Karcher [Thu, 26 Jun 2025 05:16:53 +0000 (07:16 +0200)]
MAINTAINERS: update smc section
Due to changes of my responsibilities within IBM i
can no longer act as maintainer for smc.
As a result of the co-operation with Alibaba over
the last years we decided to, once more, give them
more responsibility for smc by appointing
D. Wythe <alibuda@linux.alibaba.com> and
Dust Li <dust.li@linux.alibaba.com>
as maintainers as well.
Within IBM Sidraya Jayagond <sidraya@linux.ibm.com>
and Mahanta Jambigi <mjambigi@linux.ibm.com>
are going to take over the maintainership for smc.
Christian Eggers [Fri, 27 Jun 2025 07:05:08 +0000 (09:05 +0200)]
Bluetooth: HCI: Set extended advertising data synchronously
Currently, for controllers with extended advertising, the advertising
data is set in the asynchronous response handler for extended
adverstising params. As most advertising settings are performed in a
synchronous context, the (asynchronous) setting of the advertising data
is done too late (after enabling the advertising).
Move setting of adverstising data from asynchronous response handler
into synchronous context to fix ordering of HCI commands.
Signed-off-by: Christian Eggers <ceggers@arri.de> Fixes: a0fb3726ba55 ("Bluetooth: Use Set ext adv/scan rsp data if controller supports") Cc: stable@vger.kernel.org
v2: https://lore.kernel.org/linux-bluetooth/20250626115209.17839-1-ceggers@arri.de/ Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The unconditional call of hci_disable_advertising_sync() in
mesh_send_done_sync() also disables other LE advertisings (non mesh
related).
I am not sure whether this call is required at all, but checking the
adv_instances list (like done at other places) seems to solve the
problem.
Fixes: b338d91703fa ("Bluetooth: Implement support for Mesh") Cc: stable@vger.kernel.org Signed-off-by: Christian Eggers <ceggers@arri.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Christian Eggers [Wed, 25 Jun 2025 13:09:30 +0000 (15:09 +0200)]
Bluetooth: MGMT: set_mesh: update LE scan interval and window
According to the message of commit b338d91703fa ("Bluetooth: Implement
support for Mesh"), MGMT_OP_SET_MESH_RECEIVER should set the passive scan
parameters. Currently the scan interval and window parameters are
silently ignored, although user space (bluetooth-meshd) expects that
they can be used [1]
[1] https://git.kernel.org/pub/scm/bluetooth/bluez.git/tree/mesh/mesh-io-mgmt.c#n344 Fixes: b338d91703fa ("Bluetooth: Implement support for Mesh") Cc: stable@vger.kernel.org Signed-off-by: Christian Eggers <ceggers@arri.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Christian Eggers [Wed, 25 Jun 2025 13:09:29 +0000 (15:09 +0200)]
Bluetooth: hci_sync: revert some mesh modifications
This reverts minor parts of the changes made in commit b338d91703fa
("Bluetooth: Implement support for Mesh"). It looks like these changes
were only made for development purposes but shouldn't have been part of
the commit.
Fixes: b338d91703fa ("Bluetooth: Implement support for Mesh") Cc: stable@vger.kernel.org Signed-off-by: Christian Eggers <ceggers@arri.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Yang Li [Thu, 19 Jun 2025 03:01:07 +0000 (11:01 +0800)]
Bluetooth: Prevent unintended pause by checking if advertising is active
When PA Create Sync is enabled, advertising resumes unexpectedly.
Therefore, it's necessary to check whether advertising is currently
active before attempting to pause it.
< HCI Command: LE Add Device To... (0x08|0x0011) plen 7 #1345 [hci0] 48.306205
Address type: Random (0x01)
Address: 4F:84:84:5F:88:17 (Resolvable)
Identity type: Random (0x01)
Identity: FC:5B:8C:F7:5D:FB (Static)
< HCI Command: LE Set Address Re.. (0x08|0x002d) plen 1 #1347 [hci0] 48.308023
Address resolution: Enabled (0x01)
...
< HCI Command: LE Set Extended A.. (0x08|0x0039) plen 6 #1349 [hci0] 48.309650
Extended advertising: Enabled (0x01)
Number of sets: 1 (0x01)
Entry 0
Handle: 0x01
Duration: 0 ms (0x00)
Max ext adv events: 0
...
< HCI Command: LE Periodic Adve.. (0x08|0x0044) plen 14 #1355 [hci0] 48.314575
Options: 0x0000
Use advertising SID, Advertiser Address Type and address
Reporting initially enabled
SID: 0x02
Adv address type: Random (0x01)
Adv address: 4F:84:84:5F:88:17 (Resolvable)
Identity type: Random (0x01)
Identity: FC:5B:8C:F7:5D:FB (Static)
Skip: 0x0000
Sync timeout: 20000 msec (0x07d0)
Sync CTE type: 0x0000
Fixes: ad383c2c65a5 ("Bluetooth: hci_sync: Enable advertising when LL privacy is enabled") Signed-off-by: Yang Li <yang.li@amlogic.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Jiawen Wu [Wed, 25 Jun 2025 02:39:24 +0000 (10:39 +0800)]
net: libwx: fix the creation of page_pool
'rx_ring->size' means the count of ring descriptors multiplied by the
size of one descriptor. When increasing the count of ring descriptors,
it may exceed the limit of pool size.
[ 864.209610] page_pool_create_percpu() gave up with errno -7
[ 864.209613] txgbe 0000:11:00.0: Page pool creation failed: -7
Fix to set the pool_size to the count of ring descriptors.
Fixes: 850b971110b2 ("net: libwx: Allocate Rx and Tx resources") Cc: stable@vger.kernel.org Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Link: https://patch.msgid.link/434C72BFB40E350A+20250625023924.21821-1-jiawenwu@trustnetic.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski [Tue, 24 Jun 2025 18:32:58 +0000 (11:32 -0700)]
net: selftests: fix TCP packet checksum
The length in the pseudo header should be the length of the L3 payload
AKA the L4 header+payload. The selftest code builds the packet from
the lower layers up, so all the headers are pushed already when it
constructs L4. We need to subtract the lower layer headers from skb->len.
Linus Torvalds [Thu, 26 Jun 2025 04:09:02 +0000 (21:09 -0700)]
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Fix use-after-free in libbpf when map is resized (Adin Scannell)
- Fix verifier assumptions about 2nd argument of bpf_sysctl_get_name
(Jerome Marchand)
- Fix verifier assumption of nullness of d_inode in dentry (Song Liu)
- Fix global starvation of LRU map (Willem de Bruijn)
- Fix potential NULL dereference in btf_dump__free (Yuan Chen)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: adapt one more case in test_lru_map to the new target_free
libbpf: Fix possible use-after-free for externs
selftests/bpf: Convert test_sysctl to prog_tests
bpf: Specify access type of bpf_sysctl_get_name args
libbpf: Fix null pointer dereference in btf_dump__free on allocation failure
bpf: Adjust free target to avoid global starvation of LRU map
bpf: Mark dentry->d_inode as trusted_or_null
Linus Torvalds [Thu, 26 Jun 2025 03:48:48 +0000 (20:48 -0700)]
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull mount fixes from Al Viro:
"Several mount-related fixes"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
userns and mnt_idmap leak in open_tree_attr(2)
attach_recursive_mnt(): do not lock the covering tree when sliding something under it
replace collect_mounts()/drop_collected_mounts() with a safer variant
Kuniyuki Iwashima [Tue, 24 Jun 2025 21:45:00 +0000 (14:45 -0700)]
atm: Release atm_dev_mutex after removing procfs in atm_dev_deregister().
syzbot reported a warning below during atm_dev_register(). [0]
Before creating a new device and procfs/sysfs for it, atm_dev_register()
looks up a duplicated device by __atm_dev_lookup(). These operations are
done under atm_dev_mutex.
However, when removing a device in atm_dev_deregister(), it releases the
mutex just after removing the device from the list that __atm_dev_lookup()
iterates over.
So, there will be a small race window where the device does not exist on
the device list but procfs/sysfs are still not removed, triggering the
splat.
Let's hold the mutex until procfs/sysfs are removed in
atm_dev_deregister().
====================
netlink: specs: enforce strict naming of properties
I got annoyed once again by the name properties in the ethtool spec
which use underscore instead of dash. I previously assumed that there
is a lot of such properties in the specs so fixing them now would
be near impossible. On a closer look, however, I only found 22
(rough grep suggests we have ~4.8k names in the specs, so bad ones
are just 0.46%).
Add a regex to the JSON schema to enforce the naming, fix the few
bad names. I was hoping we could start enforcing this from newer
families, but there's no correlation between the protocol and the
number of errors. If anything classic netlink has more recently
added specs so it has fewer errors.
The regex is just for name properties which will end up visible
to the user (in Python or YNL CLI). I left the c-name properties
alone, those don't matter as much. C codegen rewrites them, anyway.
I'm not updating the spec for genetlink-c. Looks like it has no
users, new families use genetlink, all old ones need genetlink-legacy.
If these patches are merged I will remove genetlink-c completely
in net-next.
====================
Jakub Kicinski [Tue, 24 Jun 2025 21:10:02 +0000 (14:10 -0700)]
netlink: specs: enforce strict naming of properties
Add a regexp to make sure all names which may end up being visible
to the user consist of lower case characters, numbers and dashes.
Underscores keep sneaking into the specs, which is not visible
in the C code but makes the Python and alike inconsistent.
Note that starting with a number is okay, as in C the full
name will include the family name.
For legacy families we can't enforce the naming in the family
name or the multicast group names, as these are part of the
binary uAPI of the kernel.
For classic netlink we need to allow capital letters in names
of struct members. TC has some structs with capitalized members.
Jakub Kicinski [Tue, 24 Jun 2025 21:10:01 +0000 (14:10 -0700)]
netlink: specs: tc: replace underscores with dashes in names
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Jakub Kicinski [Tue, 24 Jun 2025 21:10:00 +0000 (14:10 -0700)]
netlink: specs: rt-link: replace underscores with dashes in names
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: b2f63d904e72 ("doc/netlink: Add spec for rt link messages") Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250624211002.3475021-9-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 24 Jun 2025 21:09:59 +0000 (14:09 -0700)]
netlink: specs: mptcp: replace underscores with dashes in names
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: bc8aeb2045e2 ("Documentation: netlink: add a YAML spec for mptcp") Reviewed-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250624211002.3475021-8-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 24 Jun 2025 21:09:58 +0000 (14:09 -0700)]
netlink: specs: ovs_flow: replace underscores with dashes in names
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: 93b230b549bc ("netlink: specs: add ynl spec for ovs_flow") Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Reviewed-by: Ilya Maximets <i.maximets@ovn.org> Reviewed-by: Eelco Chaudron <echaudro@redhat.com> Link: https://patch.msgid.link/20250624211002.3475021-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 24 Jun 2025 21:09:57 +0000 (14:09 -0700)]
netlink: specs: devlink: replace underscores with dashes in names
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: 429ac6211494 ("devlink: define enum for attr types of dynamic attributes") Fixes: f2f9dd164db0 ("netlink: specs: devlink: add the remaining command to generate complete split_ops") Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250624211002.3475021-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 24 Jun 2025 21:09:56 +0000 (14:09 -0700)]
netlink: specs: dpll: replace underscores with dashes in names
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: 3badff3a25d8 ("dpll: spec: Add Netlink spec in YAML") Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250624211002.3475021-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 24 Jun 2025 21:09:55 +0000 (14:09 -0700)]
netlink: specs: ethtool: replace underscores with dashes in names
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen replaces special chars in names)
but gives more uniform naming in Python.
Fixes: 13e59344fb9d ("net: ethtool: add support for symmetric-xor RSS hash") Fixes: 46fb3ba95b93 ("ethtool: Add an interface for flashing transceiver modules' firmware") Reviewed-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250624211002.3475021-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 24 Jun 2025 21:09:54 +0000 (14:09 -0700)]
netlink: specs: fou: replace underscores with dashes in names
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Jakub Kicinski [Tue, 24 Jun 2025 21:09:53 +0000 (14:09 -0700)]
netlink: specs: nfsd: replace underscores with dashes in names
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: 13727f85b49b ("NFSD: introduce netlink stubs") Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Link: https://patch.msgid.link/20250624211002.3475021-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon Horman [Tue, 24 Jun 2025 16:35:12 +0000 (17:35 +0100)]
net: enetc: Correct endianness handling in _enetc_rd_reg64
enetc_hw.h provides two versions of _enetc_rd_reg64.
One which simply calls ioread64() when available.
And another that composes the 64-bit result from ioread32() calls.
In the second case the code appears to assume that each ioread32() call
returns a little-endian value. However both the shift and logical or
used to compose the return value would not work correctly on big endian
systems if this were the case. Moreover, this is inconsistent with the
first case where the return value of ioread64() is assumed to be in host
byte order.
It appears that the correct approach is for both versions to treat the
return value of ioread*() functions as being in host byte order. And
this patch corrects the ioread32()-based version to do so.
This is a bug but would only manifest on big endian systems
that make use of the ioread32-based implementation of _enetc_rd_reg64.
While all in-tree users of this driver are little endian and
make use of the ioread64-based implementation of _enetc_rd_reg64.
Thus, no in-tree user of this driver is affected by this bug.
Adin Scannell [Wed, 25 Jun 2025 05:02:15 +0000 (22:02 -0700)]
libbpf: Fix possible use-after-free for externs
The `name` field in `obj->externs` points into the BTF data at initial
open time. However, some functions may invalidate this after opening and
before loading (e.g. `bpf_map__set_value_size`), which results in
pointers into freed memory and undefined behavior.
The simplest solution is to simply `strdup` these strings, similar to
the `essent_name`, and free them at the same time.
In order to test this path, the `global_map_resize` BPF selftest is
modified slightly to ensure the presence of an extern, which causes this
test to fail prior to the fix. Given there isn't an obvious API or error
to test against, I opted to add this to the existing test as an aspect
of the resizing feature rather than duplicate the test.
Linus Torvalds [Wed, 25 Jun 2025 18:20:14 +0000 (11:20 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Fixes all in drivers.
ufs and megaraid_sas are small and obvious.
The large diffstat in fnic comes from two pieces: the addition of
quite a bit of logging (no change to function) and the reworking of
the timeout allocation path for the two conditions that can occur
simultaneously to prevent reusing the same abort frame and then both
trying to free it"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: fnic: Fix missing DMA mapping error in fnic_send_frame()
scsi: fnic: Set appropriate logging level for log message
scsi: fnic: Add and improve logs in FDMI and FDMI ABTS paths
scsi: fnic: Turn off FDMI ACTIVE flags on link down
scsi: fnic: Fix crash in fnic_wq_cmpl_handler when FDMI times out
scsi: ufs: core: Fix clk scaling to be conditional in reset and restore
scsi: megaraid_sas: Fix invalid node index
Linus Torvalds [Wed, 25 Jun 2025 18:13:31 +0000 (11:13 -0700)]
Merge tag 'uml-for-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML fixes from Johannes Berg:
- fix FP registers in seccomp mode
- prevent duplicate devices in VFIO support
- don't ignore errors in UBD thread start
- reduce stack use with clang 19
* tag 'uml-for-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: vector: Reduce stack usage in vector_eth_configure()
um: Use correct data source in fpregs_legacy_set()
um: vfio: Prevent duplicate device assignments
um: ubd: Add missing error check in start_io_thread()
Jakub Kicinski [Wed, 25 Jun 2025 17:26:16 +0000 (10:26 -0700)]
Merge tag 'wireless-2025-06-25' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Just a few fixes:
- iwlegacy: work around large stack with clang/kasan
- mac80211: fix integer overflow
- mac80211: fix link struct init vs. RCU publish
- iwlwifi: fix warning on IFF_UP
* tag 'wireless-2025-06-25' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: finish link init before RCU publish
wifi: iwlwifi: mvm: assume '1' as the default mac_config_cmd version
wifi: mac80211: fix beacon interval calculation overflow
wifi: iwlegacy: work around excessive stack usage on clang/kasan
====================
Tiwei Bie [Mon, 23 Jun 2025 11:08:29 +0000 (19:08 +0800)]
um: vector: Reduce stack usage in vector_eth_configure()
When compiling with clang (19.1.7), initializing *vp using a compound
literal may result in excessive stack usage. Fix it by initializing the
required fields of *vp individually.
From the crash dump, we found that the cpu_map_flush_list inside
redirect info is partially corrupted: its list_head->next points to
itself, but list_head->prev points to a valid list of unflushed bq
entries.
This turned out to be a result of missed XDP flush on redirect lists. By
digging in the actual source code, we found that
commit 7f0a168b0441 ("bnxt_en: Add completion ring pointer in TX and RX
ring structures") incorrectly overwrites the event mask for XDP_REDIRECT
in bnxt_rx_xdp. We can stably reproduce this crash by returning XDP_TX
and XDP_REDIRECT randomly for incoming packets in a naive XDP program.
Properly propagate the XDP_REDIRECT events back fixes the crash.
Fixes: a7559bc8c17c ("bnxt: support transmit and free of aggregation buffers") Tested-by: Andrew Rzeznik <arzeznik@cloudflare.com> Signed-off-by: Yan Zhai <yan@cloudflare.com> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Link: https://patch.msgid.link/aFl7jpCNzscumuN2@debian.debian Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 25 Jun 2025 00:20:43 +0000 (17:20 -0700)]
Merge tag 'selinux-pr-20250624' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"Another small SELinux patch to fix a problem seen by the dracut-ng
folks during early boot when SELinux is enabled, but the policy has
yet to be loaded"
* tag 'selinux-pr-20250624' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: change security_compute_sid to return the ssid or tsid on match
If a userspace application just include <linux/vm_sockets.h> will fail
to build with the following errors:
/usr/include/linux/vm_sockets.h:182:39: error: invalid application of ‘sizeof’ to incomplete type ‘struct sockaddr’
182 | unsigned char svm_zero[sizeof(struct sockaddr) -
| ^~~~~~
/usr/include/linux/vm_sockets.h:183:39: error: ‘sa_family_t’ undeclared here (not in a function)
183 | sizeof(sa_family_t) -
|
Include <sys/socket.h> for userspace (guarded by ifndef __KERNEL__)
where `struct sockaddr` and `sa_family_t` are defined.
We already do something similar in <linux/mptcp.h> and <linux/if.h>.
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Reported-by: Daan De Meyer <daan.j.demeyer@gmail.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20250623100053.40979-1-sgarzare@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Having PM put sync in remove function is causing PM underflow during
remove operation. This is caused by the function, runtime_pm_get_sync,
not being called anywhere during the op. Ensure that calls to
pm_runtime_enable()/pm_runtime_disable() and
pm_runtime_get_sync()/pm_runtime_put_sync() match.
Continuous bind/unbind will result in an "Unbalanced pm_runtime_enable" error.
Subsequent unbind attempts will return a "No such device" error, while bind
attempts will return a "Resource temporarily unavailable" error.
Also, change clk_disable_unprepare() to clk_disable() since continuous
bind and unbind operations will trigger a warning indicating that the clock is
already unprepared.
Al Viro [Tue, 24 Jun 2025 14:25:04 +0000 (10:25 -0400)]
userns and mnt_idmap leak in open_tree_attr(2)
Once want_mount_setattr() has returned a positive, it does require
finish_mount_kattr() to release ->mnt_userns. Failing do_mount_setattr()
does not change that.
As the result, we can end up leaking userns and possibly mnt_idmap as
well.
Fixes: c4a16820d901 ("fs: add open_tree_attr()") Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Johannes Berg [Tue, 24 Jun 2025 11:07:49 +0000 (13:07 +0200)]
wifi: mac80211: finish link init before RCU publish
Since the link/conf pointers can be accessed without any
protection other than RCU, make sure the data is actually
set up before publishing the structures.
Miri Korenblit [Tue, 24 Jun 2025 07:14:27 +0000 (10:14 +0300)]
wifi: iwlwifi: mvm: assume '1' as the default mac_config_cmd version
Unfortunately, FWs of some devices don't have the version of the
iwl_mac_config_cmd defined in the TLVs. We send 0 as the 'def argument
to iwl_fw_lookup_cmd_ver, so for such FWs, the return value will be 0,
leading to a warning, and to not sending the command.
Fix this by assuming that the default version is 1.
Paolo Abeni [Tue, 24 Jun 2025 08:10:09 +0000 (10:10 +0200)]
Merge branch 'af_unix-fix-two-oob-issues'
Kuniyuki Iwashima says:
====================
af_unix: Fix two OOB issues.
From: Kuniyuki Iwashima <kuniyu@google.com>
Recently, two issues are reported regarding MSG_OOB.
Patch 1 fixes issues that happen when multiple consumed OOB
skbs are placed consecutively in the recv queue.
Patch 2 fixes an inconsistent behaviour that close()ing a socket
with a consumed OOB skb at the head of the recv queue triggers
-ECONNRESET on the peer's recv().
Kuniyuki Iwashima [Thu, 19 Jun 2025 04:13:57 +0000 (21:13 -0700)]
af_unix: Don't set -ECONNRESET for consumed OOB skb.
Christian Brauner reported that even after MSG_OOB data is consumed,
calling close() on the receiver socket causes the peer's recv() to
return -ECONNRESET:
Kuniyuki Iwashima [Thu, 19 Jun 2025 04:13:56 +0000 (21:13 -0700)]
af_unix: Add test for consecutive consumed OOB.
Let's add a test case where consecutive concumed OOB skbs stay
at the head of the queue.
Without the previous patch, ioctl(SIOCATMARK) assertion fails.
Before:
# RUN msg_oob.no_peek.ex_oob_ex_oob_oob ...
# msg_oob.c:305:ex_oob_ex_oob_oob:Expected answ[0] (0) == oob_head (1)
# ex_oob_ex_oob_oob: Test terminated by assertion
# FAIL msg_oob.no_peek.ex_oob_ex_oob_oob
not ok 12 msg_oob.no_peek.ex_oob_ex_oob_oob
After:
# RUN msg_oob.no_peek.ex_oob_ex_oob_oob ...
# OK msg_oob.no_peek.ex_oob_ex_oob_oob
ok 12 msg_oob.no_peek.ex_oob_ex_oob_oob
Even though a user reads OOB data, the skb holding the data stays on
the recv queue to mark the OOB boundary and break the next recv().
After the last send() in the scenario above, the sk2's recv queue has
2 leading consumed OOB skbs and 1 real OOB skb.
Then, the following happens during the next recv() without MSG_OOB
1. unix_stream_read_generic() peeks the first consumed OOB skb
2. manage_oob() returns the next consumed OOB skb
3. unix_stream_read_generic() fetches the next not-yet-consumed OOB skb
4. unix_stream_read_generic() reads and frees the OOB skb
, and the last recv(MSG_OOB) triggers KASAN splat.
The 3. above occurs because of the SO_PEEK_OFF code, which does not
expect unix_skb_len(skb) to be 0, but this is true for such consumed
OOB skbs.
In addition to this use-after-free, there is another issue that
ioctl(SIOCATMARK) does not function properly with consecutive consumed
OOB skbs.
So, nothing good comes out of such a situation.
Instead of complicating manage_oob(), ioctl() handling, and the next
ECONNRESET fix by introducing a loop for consecutive consumed OOB skbs,
let's not leave such consecutive OOB unnecessarily.
Now, while receiving an OOB skb in unix_stream_recv_urg(), if its
previous skb is a consumed OOB skb, it is freed.
[0]:
BUG: KASAN: slab-use-after-free in unix_stream_read_actor (net/unix/af_unix.c:3027)
Read of size 4 at addr ffff888106ef2904 by task python3/315
The buggy address belongs to the object at ffff888106ef28c0
which belongs to the cache skbuff_head_cache of size 224
The buggy address is located 68 bytes inside of
freed 224-byte region [ffff888106ef28c0, ffff888106ef29a0)
Memory state around the buggy address: ffff888106ef2800: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc ffff888106ef2880: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
>ffff888106ef2900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^ ffff888106ef2980: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc ffff888106ef2a00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Arnd Bergmann [Fri, 20 Jun 2025 11:39:42 +0000 (13:39 +0200)]
wifi: iwlegacy: work around excessive stack usage on clang/kasan
In some rare randconfig builds, I seem to trigger a bug in clang where
it unrolls a loop but then runs out of registers, which then get
spilled to the stack:
This seems to be the same one I saw in the omapdrm driver, and there is
an easy workaround by not inlining the il4965_rs_rate_scale_clear_win
function.
====================
bpf: Specify access type of bpf_sysctl_get_name args
The second argument of bpf_sysctl_get_name() helper is a pointer to a
buffer that is being written to. However that isn't specify in the
prototype. Until commit 37cce22dbd51a ("bpf: verifier: Refactor helper
access type tracking") that mistake was hidden by the way the verifier
treated helper accesses. Since then, the verifier, working on wrong
infromation from the prototype, can make faulty optimization that
would had been caught by the test_sysctl selftests if it was run by
the CI.
The first patch fixes bpf_sysctl_get_name prototype.
The second patch converts the test_sysctl to prog_tests so that it
will be run by the CI and catch similar issues in the future.
Changes in v3:
- Use ASSERT* macro instead of CHECK_FAIL.
- Remove useless code.
Changes in v2:
- Replace ARG_PTR_TO_UNINIT_MEM by ARG_PTR_TO_MEM | MEM_WRITE.
- Converts test_sysctl to prog_tests.
====================
Jerome Marchand [Thu, 19 Jun 2025 14:06:02 +0000 (16:06 +0200)]
bpf: Specify access type of bpf_sysctl_get_name args
The second argument of bpf_sysctl_get_name() helper is a pointer to a
buffer that is being written to. However that isn't specify in the
prototype.
Until commit 37cce22dbd51a ("bpf: verifier: Refactor helper access
type tracking"), all helper accesses were considered as a possible
write access by the verifier, so no big harm was done. However, since
then, the verifier might make wrong asssumption about the content of
that address which might lead it to make faulty optimizations (such as
removing code that was wrongly labeled dead). This is what happens in
test_sysctl selftest to the tests related to sysctl_get_name.
Add MEM_WRITE flag the second argument of bpf_sysctl_get_name().
Ido Schimmel [Thu, 19 Jun 2025 18:22:28 +0000 (21:22 +0300)]
bridge: mcast: Fix use-after-free during router port configuration
The bridge maintains a global list of ports behind which a multicast
router resides. The list is consulted during forwarding to ensure
multicast packets are forwarded to these ports even if the ports are not
member in the matching MDB entry.
When per-VLAN multicast snooping is enabled, the per-port multicast
context is disabled on each port and the port is removed from the global
router port list:
# ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1
# ip link add name dummy1 up master br1 type dummy
# ip link set dev dummy1 type bridge_slave mcast_router 2
$ bridge -d mdb show | grep router
router ports on br1: dummy1
# ip link set dev br1 type bridge mcast_vlan_snooping 1
$ bridge -d mdb show | grep router
However, the port can be re-added to the global list even when per-VLAN
multicast snooping is enabled:
# ip link set dev dummy1 type bridge_slave mcast_router 0
# ip link set dev dummy1 type bridge_slave mcast_router 2
$ bridge -d mdb show | grep router
router ports on br1: dummy1
Since commit 4b30ae9adb04 ("net: bridge: mcast: re-implement
br_multicast_{enable, disable}_port functions"), when per-VLAN multicast
snooping is enabled, multicast disablement on a port will disable the
per-{port, VLAN} multicast contexts and not the per-port one. As a
result, a port will remain in the global router port list even after it
is deleted. This will lead to a use-after-free [1] when the list is
traversed (when adding a new port to the list, for example):
# ip link del dev dummy1
# ip link add name dummy2 up master br1 type dummy
# ip link set dev dummy2 type bridge_slave mcast_router 2
Similarly, stale entries can also be found in the per-VLAN router port
list. When per-VLAN multicast snooping is disabled, the per-{port, VLAN}
contexts are disabled on each port and the port is removed from the
per-VLAN router port list:
# ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1
# ip link add name dummy1 up master br1 type dummy
# bridge vlan add vid 2 dev dummy1
# bridge vlan global set vid 2 dev br1 mcast_snooping 1
# bridge vlan set vid 2 dev dummy1 mcast_router 2
$ bridge vlan global show dev br1 vid 2 | grep router
router ports: dummy1
# ip link set dev br1 type bridge mcast_vlan_snooping 0
$ bridge vlan global show dev br1 vid 2 | grep router
However, the port can be re-added to the per-VLAN list even when
per-VLAN multicast snooping is disabled:
# bridge vlan set vid 2 dev dummy1 mcast_router 0
# bridge vlan set vid 2 dev dummy1 mcast_router 2
$ bridge vlan global show dev br1 vid 2 | grep router
router ports: dummy1
When the VLAN is deleted from the port, the per-{port, VLAN} multicast
context will not be disabled since multicast snooping is not enabled
on the VLAN. As a result, the port will remain in the per-VLAN router
port list even after it is no longer member in the VLAN. This will lead
to a use-after-free [2] when the list is traversed (when adding a new
port to the list, for example):
# ip link add name dummy2 up master br1 type dummy
# bridge vlan add vid 2 dev dummy2
# bridge vlan del vid 2 dev dummy1
# bridge vlan set vid 2 dev dummy2 mcast_router 2
Fix these issues by removing the port from the relevant (global or
per-VLAN) router port list in br_multicast_port_ctx_deinit(). The
function is invoked during port deletion with the per-port multicast
context and during VLAN deletion with the per-{port, VLAN} multicast
context.
Note that deleting the multicast router timer is not enough as it only
takes care of the temporary multicast router states (1 or 3) and not the
permanent one (2).
[1]
BUG: KASAN: slab-out-of-bounds in br_multicast_add_router.part.0+0x3f1/0x560
Write of size 8 at addr ffff888004a67328 by task ip/384
[...]
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xa0
print_address_description.constprop.0+0x6f/0x350
print_report+0x108/0x205
kasan_report+0xdf/0x110
br_multicast_add_router.part.0+0x3f1/0x560
br_multicast_set_port_router+0x74e/0xac0
br_setport+0xa55/0x1870
br_port_slave_changelink+0x95/0x120
__rtnl_newlink+0x5e8/0xa40
rtnl_newlink+0x627/0xb00
rtnetlink_rcv_msg+0x6fb/0xb70
netlink_rcv_skb+0x11f/0x350
netlink_unicast+0x426/0x710
netlink_sendmsg+0x75a/0xc20
__sock_sendmsg+0xc1/0x150
____sys_sendmsg+0x5aa/0x7b0
___sys_sendmsg+0xfc/0x180
__sys_sendmsg+0x124/0x1c0
do_syscall_64+0xbb/0x360
entry_SYSCALL_64_after_hwframe+0x4b/0x53
[2]
BUG: KASAN: slab-use-after-free in br_multicast_add_router.part.0+0x378/0x560
Read of size 8 at addr ffff888009f00840 by task bridge/391
[...]
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xa0
print_address_description.constprop.0+0x6f/0x350
print_report+0x108/0x205
kasan_report+0xdf/0x110
br_multicast_add_router.part.0+0x378/0x560
br_multicast_set_port_router+0x6f9/0xac0
br_vlan_process_options+0x8b6/0x1430
br_vlan_rtm_process_one+0x605/0xa30
br_vlan_rtm_process+0x396/0x4c0
rtnetlink_rcv_msg+0x2f7/0xb70
netlink_rcv_skb+0x11f/0x350
netlink_unicast+0x426/0x710
netlink_sendmsg+0x75a/0xc20
__sock_sendmsg+0xc1/0x150
____sys_sendmsg+0x5aa/0x7b0
___sys_sendmsg+0xfc/0x180
__sys_sendmsg+0x124/0x1c0
do_syscall_64+0xbb/0x360
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Linus Torvalds [Mon, 23 Jun 2025 22:02:57 +0000 (15:02 -0700)]
Merge tag 'for-6.16/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mikulas Patocka:
- dm-crypt: fix a crash on 32-bit machines
- dm-raid: replace "rdev" with correct loop variable name "r"
* tag 'for-6.16/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-raid: fix variable in journal device check
dm-crypt: Extend state buffer size in crypt_iv_lmk_one
Linus Torvalds [Mon, 23 Jun 2025 21:55:40 +0000 (14:55 -0700)]
Merge tag 'f2fs-for-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs fixes from Jaegeuk Kim:
- fix double-unlock introduced by the recent folio conversion
- fix stale page content beyond EOF complained by xfstests/generic/363
* tag 'f2fs-for-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: fix to zero post-eof page
f2fs: Fix __write_node_folio() conversion
Breno Leitao [Fri, 20 Jun 2025 18:48:55 +0000 (11:48 -0700)]
net: netpoll: Initialize UDP checksum field before checksumming
commit f1fce08e63fe ("netpoll: Eliminate redundant assignment") removed
the initialization of the UDP checksum, which was wrong and broke
netpoll IPv6 transmission due to bad checksumming.
udph->check needs to be set before calling csum_ipv6_magic().
Linus Torvalds [Mon, 23 Jun 2025 18:16:38 +0000 (11:16 -0700)]
Merge tag 'for-6.16-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Fixes:
- fix invalid inode pointer dereferences during log replay
- fix a race between renames and directory logging
- fix shutting down delayed iput worker
- fix device byte accounting when dropping chunk
- in zoned mode, fix offset calculations for DUP profile when
conventional and sequential zones are used together
Regression fixes:
- fix possible double unlock of extent buffer tree (xarray
conversion)
- in zoned mode, fix extent buffer refcount when writing out extents
(xarray conversion)
Error handling fixes and updates:
- handle unexpected extent type when replaying log
- check and warn if there are remaining delayed inodes when putting a
root
- fix assertion when building free space tree
- handle csum tree error with mount option 'rescue=ibadroot'
Other:
- error message updates: add prefix to all scrub related messages,
include other information in messages"
* tag 'for-6.16-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: fix alloc_offset calculation for partly conventional block groups
btrfs: handle csum tree error with rescue=ibadroots correctly
btrfs: fix race between async reclaim worker and close_ctree()
btrfs: fix assertion when building free space tree
btrfs: don't silently ignore unexpected extent type when replaying log
btrfs: fix invalid inode pointer dereferences during log replay
btrfs: fix double unlock of buffer_tree xarray when releasing subpage eb
btrfs: update superblock's device bytes_used when dropping chunk
btrfs: fix a race between renames and directory logging
btrfs: scrub: add prefix for the error messages
btrfs: warn if leaking delayed_nodes in btrfs_put_root()
btrfs: fix delayed ref refcount leak in debug assertion
btrfs: include root in error message when unlinking inode
btrfs: don't drop a reference if btrfs_check_write_meta_pointer() fails
Yuan Chen [Wed, 18 Jun 2025 01:19:33 +0000 (09:19 +0800)]
libbpf: Fix null pointer dereference in btf_dump__free on allocation failure
When btf_dump__new() fails to allocate memory for the internal hashmap
(btf_dump->type_names), it returns an error code. However, the cleanup
function btf_dump__free() does not check if btf_dump->type_names is NULL
before attempting to free it. This leads to a null pointer dereference
when btf_dump__free() is called on a btf_dump object.
Al Viro [Sun, 22 Jun 2025 22:03:29 +0000 (18:03 -0400)]
attach_recursive_mnt(): do not lock the covering tree when sliding something under it
If we are propagating across the userns boundary, we need to lock the
mounts added there. However, in case when something has already
been mounted there and we end up sliding a new tree under that,
the stuff that had been there before should not get locked.
IOW, lock_mnt_tree() should be called before we reparent the
preexisting tree on top of what we are adding.
Fixes: 3bd045cc9c4b ("separate copying and locking mount tree on cross-userns copies") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Tue, 17 Jun 2025 04:09:51 +0000 (00:09 -0400)]
replace collect_mounts()/drop_collected_mounts() with a safer variant
collect_mounts() has several problems - one can't iterate over the results
directly, so it has to be done with callback passed to iterate_mounts();
it has an oopsable race with d_invalidate(); it creates temporary clones
of mounts invisibly for sync umount (IOW, you can have non-lazy umount
succeed leaving filesystem not mounted anywhere and yet still busy).
A saner approach is to give caller an array of struct path that would pin
every mount in a subtree, without cloning any mounts.
* collect_mounts()/drop_collected_mounts()/iterate_mounts() is gone
* collect_paths(where, preallocated, size) gives either ERR_PTR(-E...) or
a pointer to array of struct path, one for each chunk of tree visible under
'where' (i.e. the first element is a copy of where, followed by (mount,root)
for everything mounted under it - the same set collect_mounts() would give).
Unlike collect_mounts(), the mounts are *not* cloned - we just get pinning
references to the roots of subtrees in the caller's namespace.
Array is terminated by {NULL, NULL} struct path. If it fits into
preallocated array (on-stack, normally), that's where it goes; otherwise
it's allocated by kmalloc_array(). Passing 0 as size means that 'preallocated'
is ignored (and expected to be NULL).
* drop_collected_paths(paths, preallocated) is given the array returned
by an earlier call of collect_paths() and the preallocated array passed to that
call. All mount/dentry references are dropped and array is kfree'd if it's not
equal to 'preallocated'.
* instead of iterate_mounts(), users should just iterate over array
of struct path - nothing exotic is needed for that. Existing users (all in
audit_tree.c) are converted.
[folded a fix for braino reported by Venkat Rao Bagalkote <venkat88@linux.ibm.com>]
Fixes: 80b5dce8c59b0 ("vfs: Add a function to lazily unmount all mounts from any dentry") Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Mon, 23 Jun 2025 16:20:39 +0000 (09:20 -0700)]
Merge tag 'mm-hotfixes-stable-2025-06-22-18-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes. 7 are cc:stable and the remainder address post-6.15
issues or aren't considered necessary for -stable kernels. Only 4 are
for MM.
- The series `Revert "bcache: update min_heap_callbacks to use
default builtin swap"' from Kuan-Wei Chiu backs out the author's
recent min_heap changes due to a performance regression.
A fix for this regression has been developed but we felt it best to
go back to the known-good version to give the new code more bake
time.
- A lot of MAINTAINERS maintenance.
I like to get these changes upstreamed promptly because they can't
break things and more accurate/complete MAINTAINERS info hopefully
improves the speed and accuracy of our responses to submitters and
reporters"
* tag 'mm-hotfixes-stable-2025-06-22-18-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: add additional mmap-related files to mmap section
MAINTAINERS: add memfd, shmem quota files to shmem section
MAINTAINERS: add stray rmap file to mm rmap section
MAINTAINERS: add hugetlb_cgroup.c to hugetlb section
MAINTAINERS: add further init files to mm init block
MAINTAINERS: update maintainers for HugeTLB
maple_tree: fix MA_STATE_PREALLOC flag in mas_preallocate()
MAINTAINERS: add missing test files to mm gup section
MAINTAINERS: add missing mm/workingset.c file to mm reclaim section
selftests/mm: skip uprobe vma merge test if uprobes are not enabled
bcache: remove unnecessary select MIN_HEAP
Revert "bcache: remove heap-related macros and switch to generic min_heap"
Revert "bcache: update min_heap_callbacks to use default builtin swap"
selftests/mm: add configs to fix testcase failure
kho: initialize tail pages for higher order folios properly
MAINTAINERS: add linux-mm@ list to Kexec Handover
mm: userfaultfd: fix race of userfaultfd_move and swap cache
mm/gup: revert "mm: gup: fix infinite loop within __get_longterm_locked"
selftests/mm: increase timeout from 180 to 900 seconds
mm/shmem, swap: fix softlockup with mTHP swapin
Kuniyuki Iwashima [Tue, 17 Jun 2025 16:58:13 +0000 (09:58 -0700)]
Bluetooth: hci_core: Fix use-after-free in vhci_flush()
syzbot reported use-after-free in vhci_flush() without repro. [0]
From the splat, a thread close()d a vhci file descriptor while
its device was being used by iotcl() on another thread.
Once the last fd refcnt is released, vhci_release() calls
hci_unregister_dev(), hci_free_dev(), and kfree() for struct
vhci_data, which is set to hci_dev->dev->driver_data.
The problem is that there is no synchronisation after unlinking
hdev from hci_dev_list in hci_unregister_dev(). There might be
another thread still accessing the hdev which was fetched before
the unlink operation.
We can use SRCU for such synchronisation.
Let's run hci_dev_reset() under SRCU and wait for its completion
in hci_unregister_dev().
Another option would be to restore hci_dev->destruct(), which was
removed in commit 587ae086f6e4 ("Bluetooth: Remove unused
hci-destruct cb"). However, this would not be a good solution, as
we should not run hci_unregister_dev() while there are in-flight
ioctl() requests, which could lead to another data-race KCSAN splat.
Note that other drivers seem to have the same problem, for exmaple,
virtbt_remove().
[0]:
BUG: KASAN: slab-use-after-free in skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline]
BUG: KASAN: slab-use-after-free in skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937
Read of size 8 at addr ffff88807cb8d858 by task syz.1.219/6718
The buggy address belongs to the object at ffff88807cb8d800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 88 bytes inside of
freed 1024-byte region [ffff88807cb8d800, ffff88807cb8dc00)
Fixes: bf18c7118cf8 ("Bluetooth: vhci: Free driver_data on file release") Reported-by: syzbot+2faa4825e556199361f9@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=f62d64848fc4c7c30cd6 Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Acked-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Arnd Bergmann [Fri, 20 Jun 2025 13:09:53 +0000 (15:09 +0200)]
net: qed: reduce stack usage for TLV processing
clang gets a bit confused by the code in the qed_mfw_process_tlv_req and
ends up spilling registers to the stack hundreds of times. When sanitizers
are enabled, this can end up blowing the stack warning limit:
Apparently the problem is the complexity of qed_mfw_update_tlvs()
after inlining, and marking the four main branches of that function
as noinline_for_stack makes this problem completely go away, the stack
usage goes down to 100 bytes.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Mon, 23 Jun 2025 11:11:50 +0000 (19:11 +0800)]
dm-crypt: Extend state buffer size in crypt_iv_lmk_one
Add a macro CRYPTO_MD5_STATESIZE for the Crypto API export state
size of md5 and use that in dm-crypt instead of relying on the
size of struct md5_state (the latter is currently undergoing a
transition and may shrink).
Eric Dumazet [Fri, 20 Jun 2025 14:28:44 +0000 (14:28 +0000)]
atm: clip: prevent NULL deref in clip_push()
Blamed commit missed that vcc_destroy_socket() calls
clip_push() with a NULL skb.
If clip_devs is NULL, clip_push() then crashes when reading
skb->truesize.
Fixes: 93a2014afbac ("atm: fix a UAF in lec_arp_clear_vccs()") Reported-by: syzbot+1316233c4c6803382a8b@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/68556f59.a00a0220.137b3.004e.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Gengming Liu <l.dmxcsnsbh@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 22 Jun 2025 17:50:36 +0000 (10:50 -0700)]
Merge tag 'i2c-for-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- subsystem: convert drivers to use recent callbacks of struct
i2c_algorithm A typical after-rc1 cleanup, which I couldn't send in
time for rc2
- tegra: fix YAML conversion of device tree bindings
- k1: re-add a check which got lost during upstreaming
* tag 'i2c-for-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: k1: check for transfer error
i2c: use inclusive callbacks in struct i2c_algorithm
dt-bindings: i2c: nvidia,tegra20-i2c: Specify the required properties
projects / users / jedix / linux-maple.git / log