Mark Brown [Tue, 7 May 2024 01:37:51 +0000 (10:37 +0900)]
ALSA/ASoC: Intel: clarify Copyright information
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset does not change any functionality. It only clarifies the
Copyright information in ASoC/HDAudio contributions, where an "All
rights reserved" notice was mistakenly added in a number of files over
the years, likely due to copy/paste. The Intel template never included
this statement.
Mark Brown [Mon, 6 May 2024 15:31:25 +0000 (00:31 +0900)]
ASoC: SOF: Intel: remove circular dependency for
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The SoundWire BPT support will rely on the HDaudio DMA. This exposes a
circular dependency module dependency which has to be resolved by
splitting common parts used by HDaudio and SoundWire parts, and
'generic' parts used by HDaudio only.
This patchset does not change any functionality, it just moves code
around, exposes symbols that are used in the new module. The code has
been in use for more than one kernel cycle already so it really
shouldn't break any existing platforms.
The main issue with such code moves is that it makes backports or
fixes more complicated. That's the main reason why we held back these
patches until we were reasonably confident on the maturity of MTL and
LNL drivers.
Mark Brown [Mon, 6 May 2024 15:31:18 +0000 (00:31 +0900)]
ASoC: SOF: Intel: HDA/DMIC updates
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The first patch handles a problematic configuration where the wrong
machine driver/topology is used: when the hardware reports an external
HDaudio codec the direction is to ignore/discard ACPI SoundWire
devices.
The last two patch deal with DMIC format configurations and allow
users to select S16_LE even if the DMIC and internal copiers only
support 24 or 32-bits. The code changes are located in sound/soc/sof/
but in the scope of Intel DAIs.
Shenghao Ding [Sun, 5 May 2024 12:23:45 +0000 (20:23 +0800)]
ASoC: tas2781: Fix a warning reported by robot kernel test
Fix a warning reported by robot kernel test that 'fw_entry' in function
'tas2781_load_calibration' is used uninitialized with compiler
sh4-linux-gcc (GCC) 13.2.0, an update of copyright and a correction of the
comments.
Pierre-Louis Bossart [Fri, 3 May 2024 13:52:20 +0000 (08:52 -0500)]
ASoC: SOF: Intel: remove circular dependency on hda_sdw_process_wakeen()
hda_sdw_process_wakeen() is used in hda-loader.c, but defined in
hda.c. This code split will create a circular dependency when hda.c is
moved to a different module. Rather than an invasive code change, this
patch follows the model used for sdw_check_wakeen_irq() with an
abstraction. For now all abstractions point to the same common
routine, which is arguably not great, but this also provides us with a
future-proof way of addressing platform-specific wake processing.
Pierre-Louis Bossart [Fri, 3 May 2024 13:52:19 +0000 (08:52 -0500)]
ASoC: SOF: Intel: move tracepoint creation
CREATE_TRACEPOINTS is supposed to be used once. To avoid modpost
issues when creating modules, let's move the tracepoint creation in a
single object file.
Pierre-Louis Bossart [Fri, 3 May 2024 13:52:17 +0000 (08:52 -0500)]
ASoC: SOF: Intel: start splitting top-level from common parts
The existing code relies on the 'HDA_COMMON' module and namespace. We
need to start splitting top-level parts from the low-level ones,
otherwise we will not be able to reuse the low-level parts DMA support
for SoundWire/BPT.
This patch adds the initial split between the sof-pci-intel-xxx
modules and the common parts, in a follow-up patch we will further
split the HDA_COMMON parts
Since the PCI modules are not all independent, i.e. the CNL parts are
also used in JSL and TGL, additional Kconfig and namespace modules
were added.
Pierre-Louis Bossart [Fri, 3 May 2024 13:52:16 +0000 (08:52 -0500)]
ASoC: SOF: Intel: regroup all SoundWire/Intel functions in hda.c
To avoid circular dependencies between SOF/Intel and SoundWire/Intel,
we need to split the top-level hda.c from the rest of the code. This
patch first regroups all SoundWire related code in hda.c.
Export this helper so that we can report the DPIB position if the BPT
DMA do not complete - this is very useful to see if the DMA started or
gets stuck somehow with invalid bandwidth configurations.
Peter Ujfalusi [Fri, 3 May 2024 13:32:53 +0000 (08:32 -0500)]
ASoC: SOF: ipc4-topology: Correct DAI copier config and NHLT blob request
In case of capture and when the DAI copier have single bit depth supported
on it's input side we should use this format instead of the one in
fe_params.
Regardless of the stream direction for the NHLT blob lookup when the DAI
copier only supports single bit depth on the DAI side we should only look
for a blob which matches with this single configuration.
For DMIC if the DAI copier supports multiple bit depths, try to request
32-bit blob first if the requested bit depth is 16-bit.
If the 32-bit blob is available then look for marching (32-bit) copier
format to make sure that both the blob and copier have correct parameters.
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20240503133253.108201-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Fri, 3 May 2024 13:32:52 +0000 (08:32 -0500)]
ASoC: SOF: ipc4-topology: Allow selective update in sof_ipc4_update_hw_params
Add a bitmask parameter to sof_ipc4_update_hw_params() to be able to select
the param to be updated.
This feature can be used when not all params should be updated, for example
if caller only wants to update the format in the params, leaving the
channels and rates untouched.
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20240503133253.108201-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Pierre-Louis Bossart [Fri, 3 May 2024 13:32:51 +0000 (08:32 -0500)]
ASoC: SOF: Intel: discard SoundWire configuration if HDaudio codec is reported
The machine driver and topology selection starts with I2S, then
SoundWire and last uses HDaudio as a fallback. That assumes that the
ACPI information is correct but there are of course exceptions to the
rule.
On a Lenovo platform, an external HDaudio codec is detected, but the
ACPI tables expose TWO RT711 jack codecs. This patch skips the
SoundWire selection in case an external HDaudio codec is detected -
which only works with the additional assumption that no one will mix
HDaudio and SoundWire.
Closes: https://github.com/thesofproject/linux/issues/4962 Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20240503133253.108201-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Uwe Kleine-König [Thu, 2 May 2024 07:47:20 +0000 (09:47 +0200)]
ASoC: codecs: Drop explicit initialization of struct i2c_device_id::driver_data to 0
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Krzysztof Kozlowski [Wed, 1 May 2024 17:51:27 +0000 (19:51 +0200)]
ASoC: Use inline function for type safety in snd_soc_substream_to_rtd()
A common pattern in sound drivers is getting 'struct snd_soc_pcm_runtime'
from 'struct snd_pcm_substream' opaque pointer private_data field with
snd_soc_substream_to_rtd(). However 'private_data' appears in several
other structures as well, including 'struct snd_compr_stream'. The
field might not hold the same type for every structure, although seems
the case at least for 'struct snd_compr_stream', so code can easily make
a mistake by using macro for wrong structure passed as argument.
Switch from macro to inline function, so such mistake will be build-time
detectable.
Mark Brown [Tue, 30 Apr 2024 15:00:17 +0000 (00:00 +0900)]
ASoC: doc: dapm: various improvements
Merge series from Luca Ceresoli <luca.ceresoli@bootlin.com>:
This series applies various improvements to the DAPM documentation: a
rewrite of a few sections for clarity, style improvements and typo fixes.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
---
Changes in v2:
- avoid wrapping in patch 3 as suggested by Alex
- Link to v1: https://lore.kernel.org/r/20240416-dapm-docs-v1-0-a818d2819bf6@bootlin.com
---
Luca Ceresoli (12):
ASoC: doc: dapm: fix typos
ASoC: doc: dapm: fix struct name
ASoC: doc: dapm: minor rewording
ASoC: doc: dapm: remove dash after colon
ASoC: doc: dapm: clarify it's an internal API
ASoC: doc: dapm: replace "map" with "graph"
ASoC: doc: dapm: extend initial descrption
ASoC: doc: dapm: describe how widgets and routes are registered
ASoC: doc: dapm: fix and improve section "Registering DAPM controls"
ASoC: doc: dapm: improve section "Codec/DSP Widget Interconnections"
ASoC: doc: dapm: update section "DAPM Widget Events"
ASoC: doc: dapm: update event types
Mark Brown [Tue, 30 Apr 2024 14:35:00 +0000 (23:35 +0900)]
ASoC: Intel: avs: PCM code cleanup
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
A set of changes that aims to improve readability of cohesiveness of the
pcm code for the avs-driver.
Start off with a change that synchronizes DAI open/close - DAIs are
started up in ascending order yet their shutdown does not follow the
scheme - it is done in the ascending order too, rather than desceding
one. This patch is a dependency for the next one in line.
To align the HDAudio DAI startup/shutdown with the non-HDAudio
equivalents, relocate the code from component to DAI. The reason above
is a dependency stems from codec driver requirements - HDAudio code
found in sound/pci/hda/ expects substream->runtime->private_data to
point to a valid stream (HOST) pointer.
With the hard part done, the follow up changes update the existing code
to reduce it is complexity - removal of duplicates, renaming of
ambiguous functions and adding new fields to DAI-data object so that the
number of local variables and casts is reduced.
Mark Brown [Tue, 30 Apr 2024 14:34:51 +0000 (23:34 +0900)]
ASoC: Constify local snd_sof_dsp_ops
Merge series from Krzysztof Kozlowski <krzk@kernel.org>:
The core code does not modify the 'struct snd_sof_dsp_ops' passed via
pointer in various places, so this can be made pointer to const in few
places. This in turn allows few drivers to have the local (usually
static) 'struct snd_sof_dsp_ops' as const which increased code safety,
as it is now part of rodata.
Not all drivers can be made safer that way. Intel and AMD rely on
customizing that 'struct snd_sof_dsp_ops' before passing to SOF, so they
won't benefit. They don't lose anything., either.
Mark Brown [Tue, 30 Apr 2024 14:34:44 +0000 (23:34 +0900)]
ASoc: SOF: misc updates for 6.10
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Fixes when fw_lib_prefix is not set, updated error messages, improved
dmesg logs to SoundWire configurations not supported by ACPI
tables/topology and support for IEC61937 passthrough.
Mark Brown [Tue, 30 Apr 2024 14:34:37 +0000 (23:34 +0900)]
ASoC: Intel: updates for 6.10 - part5
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset corrects a couple of mistakes corrected, improves
snd_soc_card allocation. The new functionality is mostly for
SoundWire platforms, with new SKUs for Dell and Acer, and support for
the Cirrus Logic bridge/sidecar amplifier topology.
ASoC: sunxi: DMIC: Add controls for adjusting the mic gains
The AllWinner H6 and later SoCs that sport a DMIC block contain a set of registers to control
the gain (left + right) of each of the four supported channels.
Add ASoC controls for changing each of the stereo channel gains using alsamixer and alike
ASoC: dt-bindings: tegra30-i2s: convert to dt schema
Convert NVIDIA Tegra30 I2S binding to DT schema and
add "clock-names" property used by multiple tegra i2s blocks
in arch/arm64/boot/dts/nvidia/tegra132.dtsi. This is not a
required property by the binding.
'struct snd_sof_dsp_ops' is not modified by core code, so it can be made
const for increased code safety.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20240426-n-const-ops-var-v2-14-e553fe67ae82@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
'struct snd_sof_dsp_ops' is not modified by core code, so it can be made
const for increased code safety.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20240426-n-const-ops-var-v2-13-e553fe67ae82@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
Krzysztof Kozlowski [Fri, 26 Apr 2024 09:03:51 +0000 (11:03 +0200)]
ASoC: SOF: Constify stored pointer to snd_sof_dsp_ops
The core code does not modify the 'struct snd_sof_dsp_ops', stored in
'struct sof_dev_desc'. Make the pointer to 'struct snd_sof_dsp_ops'
const to annotate this, make code a bit safer and allow individual
drivers to also define this structure as const.
If a PCM is set to use ChainDMA then add it to the card->components string
after a marker of iec61937-pcm:, for example on current HDA platforms where
HDMI is set to use ChainDMA:
iec61937-pcm:5,4,3 (the order of the PCM ids can differ)
UCM is expected to parse and use this property to allow applications to
use bytestream passthrough in a standard way.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20240426153902.39560-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: SOF: Intel: hda: list SoundWire peripherals on mismatch
Most of the SoundWire support issues come from bad ACPI information,
or configuration reported by ACPI that are not supported by the SOF
driver/topology. The users see a "No SoundWire machine driver found"
message without any details, and the fallback to HDaudio w/ HDMI is
used.
We can reduce our support load with a clear dev_info() log that will
give us a clear hint on the mismatch and why a machine driver/topology
were not found.
Example log on a MTL device:
[ 13.158599] sof-audio-pci-intel-mtl 0000:00:1f.3: No SoundWire machine driver found for the ACPI-reported configuration:
[ 13.158603] sof-audio-pci-intel-mtl 0000:00:1f.3: link 0 mfg_id 0x025d part_id 0x0713 version 0x3
[ 13.158606] sof-audio-pci-intel-mtl 0000:00:1f.3: link 1 mfg_id 0x025d part_id 0x1316 version 0x3
[ 13.158608] sof-audio-pci-intel-mtl 0000:00:1f.3: link 2 mfg_id 0x025d part_id 0x1316 version 0x3
In parallel, we will also provide an update to `alsa-info` to log all
SoundWire peripherals found in ACPI tables.
ASoC: SOF: topology: remove incorrect widget id in error message
In sof_widget_ready() function, the shift field of
struct snd_soc_tplg_dapm_widget is incorrectly used to print
widget id in dev_err(scomp->dev, "error: failed to add widget id %d ..",
this patch removes the useless tw->shift from the error output.
Peter Ujfalusi [Fri, 26 Apr 2024 15:38:58 +0000 (10:38 -0500)]
ASoC: SOF: debug: Handle cases when fw_lib_prefix is not set, NULL
The firmware libraries are not supported by IPC3, the fw_lib_path is not
a valid parameter and it is always NULL.
Do not create the debugfs file for IPC3 at all as it is not applicable.
With IPC4 some vendors/platforms might not support loadable libraries and
the fw_lib_prefix is left to NULL to indicate this.
Handle such case with allocating "Not supported" string.
Reviewed-by: Marc Herbert <marc.herbert@intel.com> Fixes: 17f4041244e6 ("ASoC: SOF: debug: show firmware/topology prefix/names") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20240426153902.39560-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Maciej Strozek [Fri, 26 Apr 2024 15:21:23 +0000 (10:21 -0500)]
ASoC: intel: sof_sdw: Add support for cs42l43-cs35l56 sidecar amps
The cs42l43 has both a SPI master and an I2S interface, these can
be used to populate 2 cs35l56 amplifiers as sidecar devices along
side the cs42l43. Giving a system that looks like:
Add a quirk to specify this feature is present and use it to add
codec to codec DAI link to connect the amplifiers into the sound
card, add appropriate widgets, and setup clocking on the
amplifiers.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20240426152123.36284-13-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax [Fri, 26 Apr 2024 15:21:22 +0000 (10:21 -0500)]
ASoC: Intel: sof_sdw: Add callbacks to register sidecar devices
Add support for systems that have additional non-SoundWire devices
(sidecars) connected to one of the SoundWire devices in the
system. This is done through the addition of two callbacks, one used
at endpoint parsing time that will return the number of devices and
DAI links to be added, and another called later as the DAI links are
created that will populate those devices into the appropriate arrays.
Charles Keepax [Fri, 26 Apr 2024 15:21:21 +0000 (10:21 -0500)]
ASoC: Intel: sof_sdw: Delay update of the codec_conf array
Move the population of the codec_conf array from endpoint parsing
time to link creation time. This is slightly cleaner as the
population is done whilst the DAI links are also being populated,
putting all population together. However, primarily this facilitates
allowing additional non-SoundWire devices to be easily added into
the array in future feature additions.
ASoC: Intel: sof_sdw: add a space before cfg-amp in components
UCM parse amp with Regex " cfg-amp:([0-9]+)". The "ASoC: Intel: sof_sdw:
remove FOUR_SPEAKER quirks" patch removed "cfg-spk:%d " from components
which removed the necessary space as well and cause UCM can't parse the
amp number properly.
UCM can load a board-specific file based on the card long_name. Remove
the constant "Intel Soundwire SOF" long_name so that the ASoC core can
set the long_name based on DMI information.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20240426152123.36284-8-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
The static card_sof_sdw struct is modified during runtime and in case the
module is not removed, but the card is, then the next time the card is
created the card_sof_sdw will contain information from the previous card
which might lead to hard to debug issues, side effects.
Move the snd_soc_card into mc_private and use that to make sure that the
card is initialized correctly.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20240426152123.36284-7-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
The static hda_soc_card might be modified during runtime which might cause
issues on next time when the card is created.
For example if the dmic_num was set with module parameter then removed for
the next module loading then the card's components will still going to
point to the previous boot's cfg-dmics:X string.
There might be other places where devm allocated memory have been freed but
the hda_soc_card still pointing to the now unallocated memory (the memory
is freed when the platform device is removed).
Fix this issue by moving the snd_soc_card into skl_hda_private and use it
for the card registration to ensure that it is correctly initialized every
time.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20240426152123.36284-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: Intel: avs: Store pointer to link_stream in dma_data
While the HDAudio codec driver expectations must be met - store valid
pointer to HDAudio LINK stream in substream->runtime->private_data - the
code is more readable and easier to maintain if dma_data stores pointers
to both HOST and LINK stream.
DAI BE operations can refer to the LINK stream with data->link_stream,
similarly to how DAI FE operations access the HOST stream with
data->host_stream.
ASoC: Intel: avs: Remove redundancy around DAI prepare
Drop unused arguments in the avs_dai_prepare() function. With the
function updated, it matches its template in snd_soc_dai_ops and can be
referenced throughout the pcm.c file without need of any wrappers.
ASoC: Intel: avs: Remove redundancy around DAI startup
Half of the arguments in avs_dai_startup() are unused and can be
dropped. With the function updated, it matches its template in
snd_soc_dai_ops and can be referenced throughout the pcm.c file without
need of any wrappers.
ASoC: Intel: avs: Remove redundancy around DAI shutdown
Move avs_dai_nonhda_be_shutdown() to avs_dai_shutdown() as the function
is common for all transfer types, not just non-HDAudio ones. Use it
to simplify avs_dai_fe_shutdown().
While at it, fix explicit kfree(data) and use the destructor instead.
ASoC: Intel: avs: Relocate HDA BE DAI specific operations
DAI's startup()/shutdown() shall deal with allocation and freeing of
resources needed to facilitate streaming over it. Currently for HDAudio
BE DAIs some of that task is done in component->open()/close(). Relocate
the relevant pieces to address that.
ASoC: pcm: Reverse iterate DAIs when shutting them down
During startup snd_soc_dai_startup() is launched in ascending order and
the exact same thing is done during shutdown procedure. Reverse the
order in the latter so that it is symmetric to the former.
The example in this section is not in the kernel sources anymore. Replace
it with an up to date code fragment. Reword the initial paragraph. Remove
"Please" which is not standard practice in documentation.
Improve wording in a few places, cleanup ReST colon syntax, remove space
before colon, and remove the "codec" parameter in the parentheses of
snd_soc_dapm_new_widgets() (there should be no parameters in the docs, and
that function takes a card, not a codec).
ASoC: doc: dapm: fix and improve section "Registering DAPM controls"
Extend the first paragraph to mention the {,num_}dapm_routes fields just
like the widget conterparts. Mention the route fields also in the code
example. Fix "at build time", this really means "at probe time".
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://lore.kernel.org/r/20240426-dapm-docs-v2-9-87b07547eb5b@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: doc: dapm: describe how widgets and routes are registered
The small paragraph describing how to register widgets is incomplete (does
not mention routes) and mentions snd_soc_dapm_new_control() which is not
really used. Moreover it appears as a part of the "Virtual Widgets"
subsection.
Replace it with a detailed and current description of how widgets and
routes are registered, mentioning both static declaration and runtime
registration. Also make this a section on its own.
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://lore.kernel.org/r/20240426-dapm-docs-v2-8-87b07547eb5b@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
Extend the initial description providing clearer definitions of "widget"
and "route", and to stop using the word "component" to mean "widget". Give
more details and clarify wording and add a picture representing a real DAPM
graph.
Group all the introductory paragraphs before the "DAPM power domains", and
split the latter to a specific section.
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://lore.kernel.org/r/20240426-dapm-docs-v2-7-87b07547eb5b@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
Brent Lu [Fri, 26 Apr 2024 15:25:29 +0000 (10:25 -0500)]
ASoC: Intel: sof-rt5682: support bclk as PLL source on rt5682s
For rt5682s codec, we could use bclk as PLL source when the frequency
is 3.072MHz but no 2.4MHz. Update the code to select correct pll_id
and clk_id for 3.072MHz bclk.
Brent Lu [Fri, 26 Apr 2024 15:25:28 +0000 (10:25 -0500)]
ASoC: Intel: sof-rt5682: get bclk frequency from topology
A different bclk frequency 3.072MHz was introduced to tgl platform and
is used in mtl topologies. Use SOF API to get frequency from topology
instead of hardcoding.
Brent Lu [Fri, 26 Apr 2024 15:25:26 +0000 (10:25 -0500)]
ASoC: Intel: sof-rt5682: add driver_data to sof_rt5682 board
Move default BYT/CHT quirk to driver_data of sof_rt5682 board. This
fixes a problem that DMI quirk of Minnowboard board got overwritten in
probe function since it's a BYT board.
Fixes: c68e07970eca ("ASoC: intel: sof_rt5682: Add quirk for number of HDMI DAI's") Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Brent Lu <brent.lu@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20240426152529.38345-21-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Brent Lu [Fri, 26 Apr 2024 15:25:21 +0000 (10:25 -0500)]
ASoC: Intel: sof_rt5682: support MAX98357A on glk boards
For glk boards, MAX98357A speaker amplifier is supported by machine
driver glk_rt5682_mx98357a with sound card name glkrt5682max. Use same
name for backward compatibility with existing devices on market.
Brent Lu [Fri, 26 Apr 2024 15:25:20 +0000 (10:25 -0500)]
ASoC: Intel: sof_rt5682: add glk_rt5682_def for glk boards
Add the board config glk_rt5682_def to rt5682 machine driver for all
glk boards using default SSP port allocation (headphone codec on SSP2,
speaker amplifiers on SSP1).
Brent Lu [Fri, 26 Apr 2024 15:25:18 +0000 (10:25 -0500)]
ASoC: Intel: sof_da7219: support MAX98357A on glk boards
For glk boards, MAX98357A speaker amplifier is supported by machine
driver bxt_da7219_max98357a with sound card name glkda7219max. Use
same name for backward compatibility with existing devices on market.
Brent Lu [Fri, 26 Apr 2024 15:25:17 +0000 (10:25 -0500)]
ASoC: Intel: sof_da7219: add glk_da7219_def for glk boards
Add the board config glk_da7219_def to da7219 machine driver for all
glk boards using default SSP port allocation (headphone codec on SSP2,
speaker amplifiers on SSP1).
Brent Lu [Fri, 26 Apr 2024 15:25:15 +0000 (10:25 -0500)]
ASoC: Intel: sof_da7219: support MAX98357A on cml boards
For cml boards, MAX98357A speaker amplifier is supported by machine
driver bxt_da7219_max98357a with sound card name cmlda7219max. Use
same name for backward compatibility with existing devices on market.
projects / users / jedix / linux-maple.git / log