Merge tag 'imx-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers change for 6.1:
- Update i.MX8MP blk-ctrl driver to handle PCIe PHY reset bit.
- Add interconnect support into i.MX8MP blk-ctrl driver, so that i.MX8MP
NoC can be set up properly after related power domain is up.
- Add blk-ctrl support for i.MX8MP HDMI HDCP/HRV and VPU block.
- Add i.MX93 SRC power domain and MEDIA blk-ctrl driver.
- Update imx8m-blk-ctrl driver to use genpd_xlate_onecell.
* tag 'imx-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (26 commits)
soc: imx: add i.MX93 media blk ctrl driver
soc: imx: add i.MX93 SRC power domain driver
soc: imx: imx8m-blk-ctrl: Use genpd_xlate_onecell
soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets
soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl
soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR
soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl
soc: imx: add icc paths for i.MX8MP media blk ctrl
dt-bindings: arm: imx: update fsl.yaml for imx8dxl
dt-bindings: firmware: add missing resource IDs for imx8dxl
dt-bindings: arm: Add i.MX8M Mini Gateworks GW7904 board
dt-bindings: soc: add i.MX93 mediamix blk ctrl
dt-bindings: soc: add i.MX93 SRC
dt-bindings: mfd: syscon: Add i.MX93 blk ctrl system registers
dt-bindings: arm: fsl: Add MSC SM2S-IMX8PLUS SoM and SM2-MB-EP1 Carrier
dt-bindings: arm: fsl: Add Kontron BL i.MX8MM OSM-S board
dt-bindings: arm: fsl: Rename compatibles for Kontron i.MX8MM SoM/board
dt-bindings: soc: imx: add i.MX8MP vpu blk ctrl
dt-bindings: soc: imx: add interconnect property for i.MX8MM vpu blk ctrl
dt-bindings: soc: imx: drop minItems for i.MX8MM vpu blk ctrl
...
Merge tag 'tegra-for-6.1-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
soc/tegra: Changes for v6.1-rc1
This contains an assortment of small fixes and cleanups. One new feature
is introduced in the form of simple wake events which are needed to wake
the system from sleep on USB port events.
* tag 'tegra-for-6.1-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Check device node status property
soc/tegra: pmc: Use devm_clk_get_optional()
soc/tegra: fuse: Drop Kconfig dependency on TEGRA20_APB_DMA
soc/tegra: pmc: Add USB port wake events for Tegra194
soc/tegra: pmc: Add support for simple wake events
soc/tegra: pmc: Remove leading space
soc/tegra: fuse: Add missing of_node_put()
soc/tegra: fuse: Add missing of_node_put() in tegra_init_fuse()
Hector Martin [Wed, 14 Sep 2022 08:34:31 +0000 (09:34 +0100)]
soc: apple: rtkit: Add apple_rtkit_poll
This allows a client to receive messages in atomic context, by polling.
Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Sven Peter <sven@svenpeter.dev> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Peng Fan [Tue, 6 Sep 2022 03:28:15 +0000 (11:28 +0800)]
soc: imx: add i.MX93 media blk ctrl driver
Add i.MX93 mediamix blk ctrl support.
i.MX93 mediamix blk ctrl has registers to set QoS(priority) value.
It support default QoS value and cfg QoS value. Set an initial
value from i.MX design team. If LCDIF/ISI/PXP wanna a different QoS
value in future, they could use interconnect to request bandwidth.
Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Shenwei Wang [Wed, 14 Sep 2022 13:58:45 +0000 (08:58 -0500)]
dt-bindings: arm: imx: update fsl.yaml for imx8dxl
i.MX8DXL is a device targeting the automotive and industrial market
segments. The chip is designed to achieve both high performance and
low power consumption. It has a dual (2x) Cortex-A35 processor.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Martyn Welch [Tue, 23 Aug 2022 14:01:21 +0000 (15:01 +0100)]
dt-bindings: arm: fsl: Add MSC SM2S-IMX8PLUS SoM and SM2-MB-EP1 Carrier
Add DT compatible strings for a combination of the 14N0600E variant of
the Avnet (MSC branded) SM2S-IMX8PLUS SoM on it's own and in combination
with the SM2-MB-EP1 carrier board.
This updates the bindings in order to simplify the devicetree
structure and to add names for the boards that follow the latest
convention used by Kontron marketing.
It also gets rid of the N6xxx notation in the compatibles and
file names, as they are not really used anymore and often result
in confusion.
This is a breaking change, but the impact shouldn't be too big
and it makes usage and maintenance easier in the future.
Merge tag 'ffa-updates-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers
Arm FF-A firmware driver updates for v6.1
Small set of changes in preparation to add support for FF-A v1.1
specification later. It mainly contains:
1. Splitting up ffa_ops into different categories namely information,
message and memory. It helps to make info and memory operations
independent from ffa_device so thata generic memory management
module can use it without specific ffa_dev.
2. Adds support for querying FF-A features and use the same to detect
the support for 64-bit operations.
3. Adds v1.1 get_partition_info support and use the same to set up
32-bit execution mode flag automatically.
4. Adds pointer to the ffa_dev_ops in struct ffa_dev and drop
ffa_dev_ops_get() which enables to drop ffa_ops in optee_ffa
structure using ffa_dev->ops directly. Additionally ffa_dev_ops is
renamed as ffa_ops.
* tag 'ffa-updates-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Split up ffa_ops into info, message and memory operations
firmware: arm_ffa: Set up 32bit execution mode flag using partiion property
firmware: arm_ffa: Add v1.1 get_partition_info support
firmware: arm_ffa: Rename ffa_dev_ops as ffa_ops
firmware: arm_ffa: Make memory apis ffa_device independent
firmware: arm_ffa: Use FFA_FEATURES to detect if native versions are supported
firmware: arm_ffa: Add support for querying FF-A features
firmware: arm_ffa: Remove ffa_dev_ops_get()
tee: optee: Drop ffa_ops in optee_ffa structure using ffa_dev->ops directly
firmware: arm_ffa: Add pointer to the ffa_dev_ops in struct ffa_dev
Merge tag 'arm-soc/for-6.1/drivers' of https://github.com/Broadcom/stblinux into arm/drivers
This pull request contains Broadcom ARM/ARM64 SoC drivers updates for
6.1, please pull the following:
- Guilherme adds a comment to the panic notifier, part of his big panic
notifier rework series
- William migrates all of ARCH_BCM4908 dependencies to ARCH_BCMBCA
* tag 'arm-soc/for-6.1/drivers' of https://github.com/Broadcom/stblinux:
arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
soc: bcm: brcmstb: Document panic notifier action and remove useless header
soc/tegra: fuse: Drop Kconfig dependency on TEGRA20_APB_DMA
The DMA subsystem could be entirely disabled in Kconfig and then the
TEGRA20_APB_DMA option isn't available too. Hence kernel configuration
fails if DMADEVICES Kconfig option is disabled due to the unsatisfiable
dependency.
The FUSE driver isn't a critical driver and currently it only provides
NVMEM interface to userspace which isn't known to be widely used, and
thus, it's fine if FUSE driver fails to load.
Let's remove the erroneous Kconfig dependency and let the FUSE driver to
fail the probing if DMA is unavailable.
soc/tegra: pmc: Add USB port wake events for Tegra194
Tegra194 supports waking up from suspend when activity is detected on
any of the USB ports. Add these wake events so that the system can be
woken on such activity.
soc/tegra: pmc: Add support for simple wake events
Simple wake events are neither mapped to GIC interrupts nor have an
associated GPIO line. They are close to GPIO-backed wake events in that
the IRQ hierarchy processing needs to stop at the PMC level, but since
there is no dedicated GPIO line for them, let's turn them into a
separate type.
Liang He [Wed, 15 Jun 2022 12:32:32 +0000 (20:32 +0800)]
soc/tegra: fuse: Add missing of_node_put()
In tegra_init_apbmisc(), of_find_matching_node() will return a node
pointer with refcount incremented. We should use of_node_put() in each
failure path or when it is not used anymore.
Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Liang He [Thu, 16 Jun 2022 01:46:36 +0000 (09:46 +0800)]
soc/tegra: fuse: Add missing of_node_put() in tegra_init_fuse()
In this function, of_find_matching_node() will return a node pointer
with refcount incremented. We should use of_node_put() when the "np"
pointer is not used anymore.
Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
* tag 'samsung-drivers-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
MAINTAINERS: Drop Bartlomiej Zolnierkiewicz
MAINTAINERS: pwm-fan: Drop Bartlomiej Zolnierkiewicz
dt-bindings: media: samsung,exynos5250-gsc: convert to dtschema
Merge tag 'v6.1-rockchip-drivers1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/drivers
Powerdomain drivers for rv1126 and rk3588 socs, keep current state of
power-domains instead of always enabling when adding them, add rv1126
io domains and add binding for another "general register files" syscon.
* tag 'v6.1-rockchip-drivers1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
soc: rockchip: power-domain: add power domain support for rk3588
soc: rockchip: power-domain: do not enable domain when adding it
dt-bindings: power: rockchip: Add bindings for rk3588
dt-bindings: arm: rockchip: add rk5388 compatible string to pmu.yaml
dt-bindings: power: add power-domain header for rk3588
soc: rockchip: io-domain: Add RV1126 IO domains
dt-bindings: power: rockchip: Document RV1126 PMU IO domains
soc: rockchip: power-domain: Add RV1126 power domains
dt-bindings: power: rockchip: Document RV1126 power-controller
dt-bindings: power: Add power-domain header for RV1126
dt-bindings: soc: grf: add pcie30-{phy,pipe}-grf
Merge tag 'memory-controller-drv-mediatek-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v6.1 - MediaTek
Add support for the mt8188 SMI memory controller.
* tag 'memory-controller-drv-mediatek-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: mtk-smi: mt8188: Add SMI Support
memory: mtk-smi: Add enable IOMMU SMC command for MM master
memory: mtk-smi: Add return value for configure port function
dt-bindings: memory: mediatek: Add mt8188 smi binding
Merge tag 'memory-controller-drv-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v6.1
1. Fix OF node refcount leaks in pl353-smc and generic of_memory code.
2. Add support for FPGA DFL EMIF revision 1.
3. Update bindings for Mediatek SMI mt8195.
* tag 'memory-controller-drv-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
dt-bindings: memory: mediatek,smi: Update condition for mt8195 smi node
memory: of: Fix refcount leak bug in of_lpddr3_get_ddr_timings()
memory: of: Fix refcount leak bug in of_get_ddr_timings()
memory: dfl-emif: Update the dfl emif driver support revision 1
memory: pl353-smc: Fix refcount leak bug in pl353_smc_probe()
Krzysztof Kozlowski [Mon, 8 Aug 2022 10:15:24 +0000 (13:15 +0300)]
MAINTAINERS: Drop Bartlomiej Zolnierkiewicz
Bartlomiej's Samsung email address is not working since around last
year and there was no follow up patch take over of the drivers, so drop
the email from maintainers.
Merge tag 'amlogic-drivers-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/drivers
Amlogic Drivers changes for v6.1:
- Hold reference returned by of_get_parent() in meson_pwrc
* tag 'amlogic-drivers-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
soc: amlogic: meson-pwrc: Hold reference returned by of_get_parent()
firmware: arm_ffa: Split up ffa_ops into info, message and memory operations
In preparation to make memory operations accessible for a non
ffa_driver/device, it is better to split the ffa_ops into different
categories of operations: info, message and memory. The info and memory
are ffa_device independent and can be used without any associated
ffa_device from a non ffa_driver.
However, we don't export these info and memory APIs yet without the user.
The first users of these APIs can export them.
firmware: arm_ffa: Set up 32bit execution mode flag using partiion property
FF-A v1.1 adds a flag in the partition properties to indicate if the
partition runs in the AArch32 or AArch64 execution state. Use the same
to set-up the 32-bit execution flag mode in the ffa_dev automatically
if the detected firmware version is above v1.0 and ignore any requests
to do the same from the ffa_driver.
firmware: arm_ffa: Add v1.1 get_partition_info support
FF-A v1.1 adds support to discovery the UUIDs of the partitions that was
missing in v1.0 and which the driver workarounds by using UUIDs supplied
by the ffa_drivers.
Add the v1.1 get_partition_info support and disable the workaround if
the detected FF-A version is greater than v1.0.
firmware: arm_ffa: Make memory apis ffa_device independent
There is a requirement to make memory APIs independent of the ffa_device.
One of the use-case is to have a common memory driver that manages the
memory for all the ffa_devices. That common memory driver won't be a
ffa_driver or won't have any ffa_device associated with it. So having
these memory APIs accessible without a ffa_device is needed and should
be possible as most of these are handled by the partition manager(SPM
or hypervisor).
Drop the ffa_device argument to the memory APIs and make them ffa_device
independent.
firmware: arm_ffa: Use FFA_FEATURES to detect if native versions are supported
Currently, the ffa_dev->mode_32bit is use to detect if the native 64-bit
or 32-bit versions of FF-A ABI needs to be used. However for the FF-A
memory ABIs, it is not dependent on the ffa_device(i.e. the partition)
itself, but the partition manager(SPM).
So, the FFA_FEATURES can be use to detect if the native 64bit ABIs are
supported or not and appropriate calls can be made based on that.
Use FFA_FEATURES to detect if native versions of MEM_LEND or MEM_SHARE
are implemented and make of the same to use native memory ABIs later on.
firmware: arm_ffa: Add support for querying FF-A features
Add support for FFA_FEATURES to discover properties supported at the
FF-A interface. This interface can be used to query:
- If an FF-A interface is implemented by the component at the higher EL,
- If an implemented FF-A interface also implements any optional features
described in its interface definition, and
- Any implementation details exported by an implemented FF-A interface
as described in its interface definition.
firmware: arm_ffa: Add pointer to the ffa_dev_ops in struct ffa_dev
Currently ffa_dev_ops_get() is the way to fetch the ffa_dev_ops pointer.
It checks if the ffa_dev structure pointer is valid before returning the
ffa_dev_ops pointer.
Instead, the pointer can be made part of the ffa_dev structure and since
the core driver is incharge of creating ffa_device for each identified
partition, there is no need to check for the validity explicitly if the
pointer is embedded in the structure.
Add the pointer to the ffa_dev_ops in the ffa_dev structure itself and
initialise the same as part of creation of the device.
Krzysztof Kozlowski [Mon, 8 Aug 2022 10:15:25 +0000 (13:15 +0300)]
MAINTAINERS: pwm-fan: Drop Bartlomiej Zolnierkiewicz
Bartlomiej's Samsung email address is not working since around last
year and there was no follow up patch take over of the drivers, so drop
the email from maintainers.
Krzysztof Kozlowski [Tue, 30 Aug 2022 18:09:27 +0000 (21:09 +0300)]
dt-bindings: media: samsung,exynos5250-gsc: convert to dtschema
Convert the Samsung Exynos SoC G-Scaler bindings to DT schema.
Changes done during conversion:
1. A typical (already used) properties like clocks, iommus and
power-domains.
2. Require clocks, because they are essential for the block to operate.
3. Describe the differences in clocks between the Exynos5250/5420 and
the Exynos5433 G-Scalers. This includes the fifth Exynos5433 clock
"gsd" (GSCL Smart Deck) which was added to the DTS, but not to the
bindings and Linux driver. Similarly to Exynos5433 DECON change [1],
the clock should be used.
Liang He [Tue, 26 Jul 2022 07:38:41 +0000 (15:38 +0800)]
soc: amlogic: meson-pwrc: Hold reference returned by of_get_parent()
We should hold the reference returned by of_get_parent() and use
it to call of_node_put() for refcount balance.
Signed-off-by: Liang He <windhl@126.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220726073841.1320509-1-windhl@126.com
Chengci.Xu [Wed, 17 Aug 2022 12:46:07 +0000 (20:46 +0800)]
memory: mtk-smi: Add enable IOMMU SMC command for MM master
For concerns about security, the register to enable/disable IOMMU of
SMI LARB should only be configured in secure world. Thus, we add some
SMC command for multimedia master to enable/disable MM IOMMU in ATF by
setting the register of SMI LARB. This function is prepared for MT8188.
Chengci.Xu [Wed, 17 Aug 2022 12:46:06 +0000 (20:46 +0800)]
memory: mtk-smi: Add return value for configure port function
In MT8188, the register to enable/disable IOMMU can only be configured
in secure world by SMC call. We should add a return value for configure
port function for preparation because SMC call may return an error result.
In mt8188, there are two smi-common HW, one is for vdo(video output),
the other is for vpp(video processing pipe). They connect with different
smi-larbs, then some setting(bus_sel) is different. Differentiate them
with the compatible string.
Linus Torvalds [Sun, 28 Aug 2022 21:49:59 +0000 (14:49 -0700)]
Merge tag 'mm-hotfixes-stable-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more hotfixes from Andrew Morton:
"Seventeen hotfixes. Mostly memory management things.
Ten patches are cc:stable, addressing pre-6.0 issues"
* tag 'mm-hotfixes-stable-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
.mailmap: update Luca Ceresoli's e-mail address
mm/mprotect: only reference swap pfn page if type match
squashfs: don't call kmalloc in decompressors
mm/damon/dbgfs: avoid duplicate context directory creation
mailmap: update email address for Colin King
asm-generic: sections: refactor memory_intersects
bootmem: remove the vmemmap pages from kmemleak in put_page_bootmem
ocfs2: fix freeing uninitialized resource on ocfs2_dlm_shutdown
Revert "memcg: cleanup racy sum avoidance code"
mm/zsmalloc: do not attempt to free IS_ERR handle
binder_alloc: add missing mmap_lock calls when using the VMA
mm: re-allow pinning of zero pfns (again)
vmcoreinfo: add kallsyms_num_syms symbol
mailmap: update Guilherme G. Piccoli's email addresses
writeback: avoid use-after-free after removing device
shmem: update folio if shmem_replace_page() updates the page
mm/hugetlb: avoid corrupting page->mapping in hugetlb_mcopy_atomic_pte
Linus Torvalds [Sun, 28 Aug 2022 21:36:27 +0000 (14:36 -0700)]
Merge tag 'bitmap-6.0-rc3' of github.com:/norov/linux
Pull bitmap fixes from Yury Norov:
"Fix the reported issues, and implements the suggested improvements,
for the version of the cpumask tests [1] that was merged with commit c41e8866c28c ("lib/test: introduce cpumask KUnit test suite").
These changes include fixes for the tests, and better alignment with
the KUnit style guidelines"
* tag 'bitmap-6.0-rc3' of github.com:/norov/linux:
lib/cpumask_kunit: add tests file to MAINTAINERS
lib/cpumask_kunit: log mask contents
lib/test_cpumask: follow KUnit style guidelines
lib/test_cpumask: fix cpu_possible_mask last test
lib/test_cpumask: drop cpu_possible_mask full test
Peter Xu [Tue, 23 Aug 2022 22:11:38 +0000 (18:11 -0400)]
mm/mprotect: only reference swap pfn page if type match
Yu Zhao reported a bug after the commit "mm/swap: Add swp_offset_pfn() to
fetch PFN from swap entry" added a check in swp_offset_pfn() for swap type [1]:
When user tries to create a DAMON context via the DAMON debugfs interface
with a name of an already existing context, the context directory creation
fails but a new context is created and added in the internal data
structure, due to absence of the directory creation success check. As a
result, memory could leak and DAMON cannot be turned on. An example test
case is as below:
Return value of 'debugfs_create_dir()' is expected to be ignored in
general, but this is an exceptional case as DAMON feature is depending
on the debugfs functionality and it has the potential duplicate name
issue. This commit therefore fixes the issue by checking the directory
creation failure and immediately return the error in the case.
Link: https://lkml.kernel.org/r/20220821180853.2400-1-sj@kernel.org Fixes: 75c1c2b53c78 ("mm/damon/dbgfs: support multiple contexts") Signed-off-by: Badari Pulavarty <badari.pulavarty@intel.com> Signed-off-by: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> [ 5.15.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Colin Ian King [Wed, 17 Aug 2022 21:27:53 +0000 (22:27 +0100)]
mailmap: update email address for Colin King
Colin King is working on kernel janitorial fixes in his spare time and
using his Intel email is confusing. Use his gmail account as the default
email address.
Quanyang Wang [Fri, 19 Aug 2022 08:11:45 +0000 (16:11 +0800)]
asm-generic: sections: refactor memory_intersects
There are two problems with the current code of memory_intersects:
First, it doesn't check whether the region (begin, end) falls inside the
region (virt, vend), that is (virt < begin && vend > end).
The second problem is if vend is equal to begin, it will return true but
this is wrong since vend (virt + size) is not the last address of the
memory region but (virt + size -1) is. The wrong determination will
trigger the misreporting when the function check_for_illegal_area calls
memory_intersects to check if the dma region intersects with stext region.
The misreporting is as below (stext is at 0x80100000):
WARNING: CPU: 0 PID: 77 at kernel/dma/debug.c:1073 check_for_illegal_area+0x130/0x168
DMA-API: chipidea-usb2 e0002000.usb: device driver maps memory from kernel text or rodata [addr=800f0000] [len=65536]
Modules linked in:
CPU: 1 PID: 77 Comm: usb-storage Not tainted 5.19.0-yocto-standard #5
Hardware name: Xilinx Zynq Platform
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x58/0x70
dump_stack_lvl from __warn+0xb0/0x198
__warn from warn_slowpath_fmt+0x80/0xb4
warn_slowpath_fmt from check_for_illegal_area+0x130/0x168
check_for_illegal_area from debug_dma_map_sg+0x94/0x368
debug_dma_map_sg from __dma_map_sg_attrs+0x114/0x128
__dma_map_sg_attrs from dma_map_sg_attrs+0x18/0x24
dma_map_sg_attrs from usb_hcd_map_urb_for_dma+0x250/0x3b4
usb_hcd_map_urb_for_dma from usb_hcd_submit_urb+0x194/0x214
usb_hcd_submit_urb from usb_sg_wait+0xa4/0x118
usb_sg_wait from usb_stor_bulk_transfer_sglist+0xa0/0xec
usb_stor_bulk_transfer_sglist from usb_stor_bulk_srb+0x38/0x70
usb_stor_bulk_srb from usb_stor_Bulk_transport+0x150/0x360
usb_stor_Bulk_transport from usb_stor_invoke_transport+0x38/0x440
usb_stor_invoke_transport from usb_stor_control_thread+0x1e0/0x238
usb_stor_control_thread from kthread+0xf8/0x104
kthread from ret_from_fork+0x14/0x2c
Refactor memory_intersects to fix the two problems above.
Before the 1d7db834a027e ("dma-debug: use memory_intersects()
directly"), memory_intersects is called only by printk_late_init:
There were few places where memory_intersects was called.
When commit 1d7db834a027e ("dma-debug: use memory_intersects()
directly") was merged and CONFIG_DMA_API_DEBUG is enabled, the DMA
subsystem uses it to check for an illegal area and the calltrace above
is triggered.
[akpm@linux-foundation.org: fix nearby comment typo] Link: https://lkml.kernel.org/r/20220819081145.948016-1-quanyang.wang@windriver.com Fixes: 979559362516 ("asm/sections: add helpers to check for section data") Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thierry Reding <treding@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Liu Shixin [Fri, 19 Aug 2022 09:40:05 +0000 (17:40 +0800)]
bootmem: remove the vmemmap pages from kmemleak in put_page_bootmem
The vmemmap pages is marked by kmemleak when allocated from memblock.
Remove it from kmemleak when freeing the page. Otherwise, when we reuse
the page, kmemleak may report such an error and then stop working.
Link: https://lkml.kernel.org/r/20220819094005.2928241-1-liushixin2@huawei.com Fixes: f41f2ed43ca5 (mm: hugetlb: free the vmemmap pages associated with each HugeTLB page) Signed-off-by: Liu Shixin <liushixin2@huawei.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Heming Zhao [Mon, 15 Aug 2022 08:57:54 +0000 (16:57 +0800)]
ocfs2: fix freeing uninitialized resource on ocfs2_dlm_shutdown
After commit 0737e01de9c4 ("ocfs2: ocfs2_mount_volume does cleanup job
before return error"), any procedure after ocfs2_dlm_init() fails will
trigger crash when calling ocfs2_dlm_shutdown().
ie: On local mount mode, no dlm resource is initialized. If
ocfs2_mount_volume() fails in ocfs2_find_slot(), error handling will call
ocfs2_dlm_shutdown(), then does dlm resource cleanup job, which will
trigger kernel crash.
This solution should bypass uninitialized resources in
ocfs2_dlm_shutdown().
Link: https://lkml.kernel.org/r/20220815085754.20417-1-heming.zhao@suse.com Fixes: 0737e01de9c4 ("ocfs2: ocfs2_mount_volume does cleanup job before return error") Signed-off-by: Heming Zhao <heming.zhao@suse.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Recently we started running the kernel with rstat infrastructure on
production traffic and begin to see negative memcg stats values.
Particularly the 'sock' stat is the one which we observed having negative
value.
For now we are only seeing this issue on large machines (256 CPUs) and
only with 'sock' stat. I think the networking stack increase the stat on
one cpu and decrease it on another cpu much more often. So, this negative
sock is due to rstat flusher flushing the stats on the CPU that has seen
the decrement of sock but missed the CPU that has increments. A typical
race condition.
For easy stable backport, revert is the most simple solution. For long
term solution, I am thinking of two directions. First is just reduce the
race window by optimizing the rstat flusher. Second is if the reader sees
a negative stat value, force flush and restart the stat collection.
Basically retry but limited.
Link: https://lkml.kernel.org/r/20220817172139.3141101-1-shakeelb@google.com Fixes: 96e51ccf1af33e8 ("memcg: cleanup racy sum avoidance code") Signed-off-by: Shakeel Butt <shakeelb@google.com> Cc: "Michal Koutný" <mkoutny@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Muchun Song <songmuchun@bytedance.com> Cc: David Hildenbrand <david@redhat.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: <stable@vger.kernel.org> [5.15] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sergey Senozhatsky [Tue, 16 Aug 2022 05:09:06 +0000 (14:09 +0900)]
mm/zsmalloc: do not attempt to free IS_ERR handle
zsmalloc() now returns ERR_PTR values as handles, which zram accidentally
can pass to zs_free(). Another bad scenario is when zcomp_compress()
fails - handle has default -ENOMEM value, and zs_free() will try to free
that "pointer value".
Add the missing check and make sure that zs_free() bails out when
ERR_PTR() is passed to it.
Link: https://lkml.kernel.org/r/20220816050906.2583956-1-senozhatsky@chromium.org Fixes: c7e6f17b52e9 ("zsmalloc: zs_malloc: return ERR_PTR on failure") Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org>, Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Liam Howlett [Wed, 10 Aug 2022 16:02:25 +0000 (16:02 +0000)]
binder_alloc: add missing mmap_lock calls when using the VMA
Take the mmap_read_lock() when using the VMA in binder_alloc_print_pages()
and when checking for a VMA in binder_alloc_new_buf_locked().
It is worth noting binder_alloc_new_buf_locked() drops the VMA read lock
after it verifies a VMA exists, but may be taken again deeper in the call
stack, if necessary.
Link: https://lkml.kernel.org/r/20220810160209.1630707-1-Liam.Howlett@oracle.com Fixes: a43cfc87caaf (android: binder: stop saving a pointer to the VMA) Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reported-by: Ondrej Mosnacek <omosnace@redhat.com> Reported-by: <syzbot+a7b60a176ec13cafb793@syzkaller.appspotmail.com> Acked-by: Carlos Llamas <cmllamas@google.com> Tested-by: Ondrej Mosnacek <omosnace@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Christian Brauner (Microsoft) <brauner@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hridya Valsaraju <hridya@google.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Martijn Coenen <maco@android.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Todd Kjos <tkjos@android.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: "Arve Hjønnevåg" <arve@android.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alex Williamson [Wed, 10 Aug 2022 16:53:59 +0000 (10:53 -0600)]
mm: re-allow pinning of zero pfns (again)
The below referenced commit makes the same error as 1c563432588d ("mm: fix
is_pinnable_page against a cma page"), re-interpreting the logic to
exclude pinning of the zero page, which breaks device assignment with
vfio.
To avoid further subtle mistakes, split the logic into discrete tests.
[akpm@linux-foundation.org: simplify comment, per John] Link: https://lkml.kernel.org/r/166015037385.760108.16881097713975517242.stgit@omen Link: https://lore.kernel.org/all/165490039431.944052.12458624139225785964.stgit@omen Fixes: f25cbb7a95a2 ("mm: add zone device coherent type memory support") Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Suggested-by: Matthew Wilcox <willy@infradead.org> Suggested-by: Felix Kuehling <felix.kuehling@amd.com> Tested-by: Slawomir Laba <slawomirx.laba@intel.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: Alex Sierra <alex.sierra@amd.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Alistair Popple <apopple@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stephen Brennan [Mon, 8 Aug 2022 20:54:10 +0000 (13:54 -0700)]
vmcoreinfo: add kallsyms_num_syms symbol
The rest of the kallsyms symbols are useless without knowing the number of
symbols in the table. In an earlier patch, I somehow dropped the
kallsyms_num_syms symbol, so add it back in.
Link: https://lkml.kernel.org/r/20220808205410.18590-1-stephen.s.brennan@oracle.com Fixes: 5fd8fea935a1 ("vmcoreinfo: include kallsyms symbols") Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com> Cc: Baoquan He <bhe@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Khazhismel Kumykov [Mon, 1 Aug 2022 15:50:34 +0000 (08:50 -0700)]
writeback: avoid use-after-free after removing device
When a disk is removed, bdi_unregister gets called to stop further
writeback and wait for associated delayed work to complete. However,
wb_inode_writeback_end() may schedule bandwidth estimation dwork after
this has completed, which can result in the timer attempting to access the
just freed bdi_writeback.
Fix this by checking if the bdi_writeback is alive, similar to when
scheduling writeback work.
Since this requires wb->work_lock, and wb_inode_writeback_end() may get
called from interrupt, switch wb->work_lock to an irqsafe lock.
Link: https://lkml.kernel.org/r/20220801155034.3772543-1-khazhy@google.com Fixes: 45a2966fd641 ("writeback: fix bandwidth estimate for spiky workload") Signed-off-by: Khazhismel Kumykov <khazhy@google.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Michael Stapelberg <stapelberg+linux@google.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Tue, 12 Jul 2022 13:05:42 +0000 (21:05 +0800)]
mm/hugetlb: avoid corrupting page->mapping in hugetlb_mcopy_atomic_pte
In MCOPY_ATOMIC_CONTINUE case with a non-shared VMA, pages in the page
cache are installed in the ptes. But hugepage_add_new_anon_rmap is called
for them mistakenly because they're not vm_shared. This will corrupt the
page->mapping used by page cache code.
Link: https://lkml.kernel.org/r/20220712130542.18836-1-linmiaohe@huawei.com Fixes: f619147104c8 ("userfaultfd: add UFFDIO_CONTINUE ioctl") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Linus Torvalds [Sun, 28 Aug 2022 17:44:04 +0000 (10:44 -0700)]
Merge tag 'for-6.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Fixes:
- check that subvolume is writable when changing xattrs from security
namespace
- fix memory leak in device lookup helper
- update generation of hole file extent item when merging holes
- fix space cache corruption and potential double allocations; this
is a rare bug but can be serious once it happens, stable backports
and analysis tool will be provided
- fix error handling when deleting root references
- fix crash due to assert when attempting to cancel suspended device
replace, add message what to do if mount fails due to missing
replace item
Regressions:
- don't merge pages into bio if their page offset is not contiguous
- don't allow large NOWAIT direct reads, this could lead to short
reads eg. in io_uring"
* tag 'for-6.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: add info when mount fails due to stale replace target
btrfs: replace: drop assert for suspended replace
btrfs: fix silent failure when deleting root reference
btrfs: fix space cache corruption and potential double allocations
btrfs: don't allow large NOWAIT direct reads
btrfs: don't merge pages into bio if their page offset is not contiguous
btrfs: update generation of hole file extent item when merging holes
btrfs: fix possible memory leak in btrfs_get_dev_args_from_path()
btrfs: check if root is readonly while setting security xattr
Linus Torvalds [Sun, 28 Aug 2022 17:35:16 +0000 (10:35 -0700)]
Merge tag '6.0-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cfis fixes from Steve French:
- two locking fixes (zero range, punch hole)
- DFS 9 fix (padding), affecting some servers
- three minor cleanup changes
* tag '6.0-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Add helper function to check smb1+ server
cifs: Use help macro to get the mid header size
cifs: Use help macro to get the header preamble size
cifs: skip extra NULL byte in filenames
smb3: missing inode locks in punch hole
smb3: missing inode locks in zero range
Linus Torvalds [Sun, 28 Aug 2022 17:10:23 +0000 (10:10 -0700)]
Merge tag 'x86-urgent-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix PAT on Xen, which caused i915 driver failures
- Fix compat INT 80 entry crash on Xen PV guests
- Fix 'MMIO Stale Data' mitigation status reporting on older Intel CPUs
- Fix RSB stuffing regressions
- Fix ORC unwinding on ftrace trampolines
- Add Intel Raptor Lake CPU model number
- Fix (work around) a SEV-SNP bootloader bug providing bogus values in
boot_params->cc_blob_address, by ignoring the value on !SEV-SNP
bootups.
- Fix SEV-SNP early boot failure
- Fix the objtool list of noreturn functions and annotate snp_abort(),
which bug confused objtool on gcc-12.
- Fix the documentation for retbleed
* tag 'x86-urgent-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/ABI: Mention retbleed vulnerability info file for sysfs
x86/sev: Mark snp_abort() noreturn
x86/sev: Don't use cc_platform_has() for early SEV-SNP calls
x86/boot: Don't propagate uninitialized boot_params->cc_blob_address
x86/cpu: Add new Raptor Lake CPU model number
x86/unwind/orc: Unwind ftrace trampolines with correct ORC entry
x86/nospec: Fix i386 RSB stuffing
x86/nospec: Unwreck the RSB stuffing
x86/bugs: Add "unknown" reporting for MMIO Stale Data
x86/entry: Fix entry_INT80_compat for Xen PV guests
x86/PAT: Have pat_enabled() properly reflect state when running on Xen
Linus Torvalds [Sun, 28 Aug 2022 17:05:42 +0000 (10:05 -0700)]
Merge tag 'perf-urgent-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fixes from Ingo Molnar:
"Misc fixes: an Arch-LBR fix, a PEBS enumeration fix, an Intel DS fix,
PEBS constraints fix on Alder Lake CPUs and an Intel uncore PMU fix"
* tag 'perf-urgent-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Fix broken read_counter() for SNB IMC PMU
perf/x86/intel: Fix pebs event constraints for ADL
perf/x86/intel/ds: Fix precise store latency handling
perf/x86/core: Set pebs_capable and PMU_FL_PEBS_ALL for the Baseline
perf/x86/lbr: Enable the branch type for the Arch LBR by default
projects / users / jedix / linux-maple.git / log