Sui Jingfeng [Wed, 1 May 2024 05:13:23 +0000 (13:13 +0800)]
drm/debugfs: Drop conditionals around of_node pointers
Having conditional around the of_node pointer of the drm_bridge structure
is not necessary anymore, since drm_bridge structure always has the of_node
member since the commit d8dfccde2709 ("drm/bridge: Drop conditionals around
of_node pointers").
So drop the conditional, please also note that this patch is following the
convention used by driver core, see commit c9e358dfc4a8 ("driver-core:
remove conditionals around devicetree pointers").
Add the missing break statement that causes the following build error
CC [M] drivers/gpu/drm/i915/display/intel_display_device.o
../drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c: In function ‘build_registry’:
../drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1266:3: error: label at end of compound statement
1266 | default:
| ^~~~~~~
CC [M] drivers/gpu/drm/amd/amdgpu/gfx_v10_0.o
HDRTEST drivers/gpu/drm/xe/compat-i915-headers/i915_reg.h
CC [M] drivers/gpu/drm/amd/amdgpu/imu_v11_0.o
make[7]: *** [../scripts/Makefile.build:244: drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.o] Error 1
make[7]: *** Waiting for unfinished jobs....
Fixes: b58a0bc904ff ("nouveau: add command-line GSP-RM registry support") Closes: https://lore.kernel.org/all/913052ca6c0988db1bab293cfae38529251b4594.camel@nvidia.com/T/#m3c9acebac754f2e74a85b76c858c093bb1aacaf0 Closes: https://lore.kernel.org/all/CA+G9fYu7Ug0K8h9QJT0WbtWh_LL9Juc+VC0WMU_Z_vSSPDNymg@mail.gmail.com/ Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240430131840.742924-1-chaitanya.kumar.borah@intel.com
After IGT migrating to dynamic sub-tests, the pipe prefixes
in the expected fails list are incorrect. Lets drop those
to accurately match the expected fails.
In addition, update the xfails list to match the current passing
list. This should have ideally failed in the CI run because some
tests were marked as fail even though they passed but due to the
mismatch in test names, the matching didn't correctly work and was
resulting in those failures not being seen.
Here is the passing pipeline for apq8016 with this change:
The regulator_disable() added by the original commit solves one kind of
regulator imbalance but adds another one as it allows the regulator to be
disabled one more time than it is enabled in the following scenario:
The use case for introducing the additional regulator_disable() was
removing the module for debugging (see link below for the discussion). If
the module is removed after a .atomic_pre_enable, i.e. with an active
pipeline from the DRM point of view, .atomic_disable is not called and thus
the regulator would not be disabled.
According to the discussion however there is no actual use case for
removing the module with an active pipeline, except for
debugging/development.
On the other hand, the occurrence of a PLL lock failure is possible due to
any physical reason (e.g. a temporary hardware failure for electrical
reasons) so handling it gracefully should be supported. As there is no way
for .atomic[_pre]_enable to report an error to the core, the only clean way
to support it is calling regulator_disabled() only in .atomic_disable,
unconditionally, as it was before.
Sean Anderson [Fri, 8 Mar 2024 20:47:41 +0000 (15:47 -0500)]
drm: zynqmp_dpsub: Always register bridge
We must always register the DRM bridge, since zynqmp_dp_hpd_work_func
calls drm_bridge_hpd_notify, which in turn expects hpd_mutex to be
initialized. We do this before zynqmp_dpsub_drm_init since that calls
drm_bridge_attach. This fixes the following lockdep warning:
Fixes: eb2d64bfcc17 ("drm: xlnx: zynqmp_dpsub: Report HPD through the bridge") Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240308204741.3631919-1-sean.anderson@linux.dev
Sean Anderson [Tue, 23 Apr 2024 17:18:50 +0000 (13:18 -0400)]
drm: zynqmp_dp: Adjust training values per-lane
The feedback we get from the DPRX is per-lane. Make changes using this
information, instead of picking the maximum values from all lanes. This
results in more-consistent training on marginal links.
Sean Anderson [Tue, 23 Apr 2024 17:18:47 +0000 (13:18 -0400)]
drm: xlnx: Store base pointers in zynqmp_disp directly
The blend, avbuf, and audio members of zynqmp_disp are anonymous structs
with only one member each. This is rather pointless, so move the members
up a level.
Timur Tabi [Wed, 17 Apr 2024 21:53:17 +0000 (16:53 -0500)]
nouveau: add command-line GSP-RM registry support
Add the NVreg_RegistryDwords command line parameter, which allows
specifying additional registry keys to be sent to GSP-RM. This
allows additional configuration, debugging, and experimentation
with GSP-RM, which uses these keys to alter its behavior.
Note that these keys are passed as-is to GSP-RM, and Nouveau does
not parse them. This is in contrast to the Nvidia driver, which may
parse some of the keys to configure some functionality in concert with
GSP-RM. Therefore, any keys which also require action by the driver
may not function correctly when passed by Nouveau. Caveat emptor.
The name and format of NVreg_RegistryDwords is the same as used by
the Nvidia driver, to maintain compatibility.
Adam Ford [Mon, 22 Apr 2024 10:33:52 +0000 (05:33 -0500)]
drm/bridge: imx: Fix unmet depenency for PHY_FSL_SAMSUNG_HDMI_PHY
When enabling i.MX8MP DWC HDMI driver, it automatically selects
PHY_FSL_SAMSUNG_HDMI_PHY, since it wont' work without the phy.
This may cause some Kconfig warnings during various build tests.
Fix this by implying the phy instead of selecting the phy.
To prevent this from happening with the DRM_IMX8MP_HDMI_PVI, also
imply it instead of selecting it.
Fixes: 1f36d634670d ("drm/bridge: imx: add bridge wrapper driver for i.MX8MP DWC HDMI") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202404190103.lLm8LtuP-lkp@intel.com/ Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240422103352.8886-1-aford173@gmail.com
Program live video input format according to selected media bus format.
In the bridge mode of operation, DPSUB is connected to FPGA CRTC which
almost certainly supports a single media bus format as its output. Expect
this to be delivered via the new bridge atomic state. Program DPSUB
registers accordingly.
drm: xlnx: zynqmp_dpsub: Minimize usage of global flag
Avoid usage of global zynqmp_dpsub.dma_enabled flag in DPSUB layer
context. This flag signals whether the driver runs in DRM CRTC or DRM
bridge mode, assuming that all display layers share the same live or
non-live mode of operation. Using per-layer mode instead of global flag
will simplify future support of the hybrid scenario.
Remove redundant checks in DMA request/release contexts as
zynqmp_disp_layer.info is well-defined for all layer types, including the
correct number of DMA channels required for each particular layer.
DPSUB in bridge mode supports multiple input media bus formats.
Announce the list of supported input media bus formats via
drm_bridge.atomic_get_input_bus_fmts callback. Introduce a set of live
input formats supported by DPSUB. Add safeguards to format list functions
to prevent their misuse in the different layer modes contexts.
drm: xlnx: zynqmp_dpsub: Update live format defines
Update live format defines to match DPSUB AV_BUF_LIVE_VID_CONFIG register
layout. These defines were never referenced before, so no other changes
required.
drm: xlnx: zynqmp_dpsub: Set layer mode during creation
Set layer mode of operation (live or dma-based) during layer creation.
Each DPSUB layer mode of operation is defined by corresponding DT node port
connection, so it is possible to assign it during layer object creation.
Previously it was set in layer enable functions, although it is too late
as setting layer format depends on layer mode, and should be done before
given layer enabled.
Dmitry Baryshkov [Sun, 31 Mar 2024 20:45:48 +0000 (23:45 +0300)]
drm/bridge: adv7511: make it honour next bridge in DT
DT bindings for adv7511 and adv7533 bridges specify HDMI output to be
present at the port@1. This allows board DT to add e.g. HDMI connector
nodes or any other next chained bridge. Make adv7511 driver discover
that bridge and attach it to the chain.
drm/panel: novatek-nt36672e: stop setting register load before disable
It is pointless to set register load before disabling the register. This
vote is going to be dropped as soon as the register is disabled. Drop
these register_set_load calls.
drm/v3d: Fix race-condition between sysfs/fdinfo and interrupt handler
In V3D, the conclusion of a job is indicated by a IRQ. When a job
finishes, then we update the local and the global GPU stats of that
queue. But, while the GPU stats are being updated, a user might be
reading the stats from sysfs or fdinfo.
For example, on `gpu_stats_show()`, we could think about a scenario where
`v3d->queue[queue].start_ns != 0`, then an interrupt happens, we update
the value of `v3d->queue[queue].start_ns` to 0, we come back to
`gpu_stats_show()` to calculate `active_runtime` and now,
`active_runtime = timestamp`.
In this simple example, the user would see a spike in the queue usage,
that didn't match reality.
In order to address this issue properly, use a seqcount to protect read
and write sections of the code.
Create a function to decouple the stats calculation from the printing.
This will be useful in the next step when we add a seqcount to protect
the stats.
drm/v3d: Create function to update a set of GPU stats
Given a set of GPU stats, that is, a `struct v3d_stats` related to a
queue in a given context, create a function that can update this set
of GPU stats.
This will make it easier to instantiate the GPU stats variables and it
will create a structure where we can store all the variables that refer
to GPU stats.
Note that, when we created the struct `v3d_stats`, we renamed
`jobs_sent` to `jobs_completed`. This better express the semantics of
the variable, as we are only accounting jobs that have been completed.
drm/v3d: Create two functions to update all GPU stats variables
Currently, we manually perform all operations to update the GPU stats
variables. Apart from the code repetition, this is very prone to errors,
as we can see on commit 35f4f8c9fc97 ("drm/v3d: Don't increment
`enabled_ns` twice").
Therefore, create two functions to manage updating all GPU stats
variables. Now, the jobs only need to call for `v3d_job_update_stats()`
when the job is done and `v3d_job_start_stats()` when starting the job.
Tony Lindgren [Sun, 25 Feb 2024 06:19:39 +0000 (08:19 +0200)]
drm/bridge: tc358775: Configure hs_rate and lp_rate
The hs_rate and lp_rate may be used by the dsi host for timing
calculations. The tc358775 has a maximum bit rate of 1 Gbps/lane,
tc358765 has maximurate of 800 Mbps per lane.
Tony Lindgren [Sun, 25 Feb 2024 06:19:38 +0000 (08:19 +0200)]
drm/bridge: tc358775: Add support for tc358765
The tc358775 bridge is pin compatible with earlier tc358765 according to
the tc358774xbg_datasheet_en_20190118.pdf documentation. Compared to the
tc358765, the tc358775 supports a STBY GPIO and higher data rates.
The tc358765 has a register bit for video event mode vs video pulse mode.
We must set it to video event mode for the LCD output to work, and on the
tc358775, this bit no longer exists.
Looks like the registers seem to match otherwise based on a quick glance
comparing the defines to the earlier Android kernel tc358765 driver.
Tony Lindgren [Sun, 25 Feb 2024 06:19:35 +0000 (08:19 +0200)]
drm/bridge: tc358775: Get bridge data lanes instead of the DSI host lanes
The current code assumes the data-lanes property is configured on the
DSI host side instead of the bridge side, and assumes DSI host endpoint 1.
Let's standardize on what the other bridge drivers are doing and parse the
data-lanes property for the bridge. Only if data-lanes property is not found,
let's be nice and also check the DSI host for old dtb in use and warn.
And as Dmitry pointed out, the lanes for the host and the bridge may be
different because the lanes may be swapped on the host side.
Michael Walle [Sun, 25 Feb 2024 06:19:33 +0000 (08:19 +0200)]
drm/bridge: tc358775: fix support for jeida-18 and jeida-24
The bridge always uses 24bpp internally. Therefore, for jeida-18
mapping we need to discard the lowest two bits for each channel and thus
starting with LV_[RGB]2. jeida-24 has the same mapping but uses four
lanes instead of three, with the forth pair transmitting the lowest two
bits of each channel. Thus, the mapping between jeida-18 and jeida-24
is actually the same, except that one channel is turned off (by
selecting the RGB666 format in VPCTRL).
While at it, remove the bogus comment about the hardware default because
the default is overwritten in any case.
Tested with a jeida-18 display (Evervision VGG644804).
Fixes: b26975593b17 ("display/drm/bridge: TC358775 DSI/LVDS driver") Signed-off-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-5-tony@atomide.com
Tony Lindgren [Sun, 25 Feb 2024 06:19:32 +0000 (08:19 +0200)]
dt-bindings: display: bridge: tc358775: Add support for tc358765
The tc358765 is similar to tc358775. The tc358765 just an earlier version
of the hardware, and it's pin and register compatible with tc358775 for
most part.
From the binding point of view the only difference is that the tc358765
does not have stdby-gpios.
The device uses a clock lane, and 1 to 4 DSI data lanes. Let's add the
data-lanes property starting at 1 similar to what the other bridge
bindings are doing.
Let's also drop the data-lanes properties in the example for the DSI host
controller to avoid confusion. The configuration of the DSI host depends
on the controller used and is unrelated to the bridge binding.
Michael Walle [Sun, 25 Feb 2024 06:19:30 +0000 (08:19 +0200)]
dt-bindings: display: bridge: tc358775: make stby gpio optional
For a normal operation, the stby GPIO is not needed.
The reset pin is required because once the PPI (PHY protocol interface)
is started, it can only be stopped by asserting the reset pin.
Signed-off-by: Michael Walle <mwalle@kernel.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[tony@atomide.com: dropped regulator related changes] Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-2-tony@atomide.com
drm/bridge: add lvds controller support for sam9x7
Add a new LVDS controller driver for sam9x7 which does the following:
- Prepares and enables the LVDS Peripheral clock
- Defines its connector type as DRM_MODE_CONNECTOR_LVDS and adds itself
to the global bridge list.
- Identifies its output endpoint as panel and adds it to the encoder
display pipeline
- Enables the LVDS serializer
Add the 'sam9x75-lvds' compatible binding, which describes the Low Voltage
Differential Signaling (LVDS) Controller found on some Microchip's sam9x7
series System-on-Chip (SoC) devices. This binding will be used to define
the properties and configuration for the LVDS Controller in DT.
drm/tests: Add a test case for drm buddy clear allocation
Add a new test case for the drm buddy clear and dirty
allocation.
v2:(Matthew)
- make size as u32
- rename PAGE_SIZE with SZ_4K
- dont fragment the address space for all the order allocation
iterations. we can do it once and just increment and allocate
the size.
- create new mm with non power-of-two size to ensure the multi-root
force_merge during fini.
v1(Christian):
- Dont handle clear page as TTM flag since when moving the BO back
in from GTT again we don't need that.
- Make a specialized version of amdgpu_fill_buffer() which only
clears the VRAM areas which are not already cleared
- Drop the TTM_PL_FLAG_WIPE_ON_RELEASE check in
amdgpu_object.c
v2:
- Modify the function name amdgpu_ttm_* (Alex)
- Drop the delayed parameter (Christian)
- handle amdgpu_res_cleared(&cursor) just above the size
calculation (Christian)
- Use AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE for clearing the buffers
in the free path to properly wait for fences etc.. (Christian)
v3(Christian):
- Remove buffer clear code in VRAM manager instead change the
AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE handling to set
the DRM_BUDDY_CLEARED flag.
- Remove ! from amdgpu_res_cleared(&cursor) check.
v4(Christian):
- vres flag setting move to vram manager file
- use dma_fence_get_stub in amdgpu_ttm_clear_buffer function
- make fence a mandatory parameter and drop the if and the get/put dance
- Driver should enable the DRM_BUDDY_CLEARED flag if it
successfully clears the blocks in the free path. On the otherhand,
DRM buddy marks each block as cleared.
- Track the available cleared pages size
- If driver requests cleared memory we prefer cleared memory
but fallback to uncleared if we can't find the cleared blocks.
when driver requests uncleared memory we try to use uncleared but
fallback to cleared memory if necessary.
- When a block gets freed we clear it and mark the freed block as cleared,
when there are buddies which are cleared as well we can merge them.
Otherwise, we prefer to keep the blocks as separated.
- Add a function to support defragmentation.
v1:
- Depends on the flag check DRM_BUDDY_CLEARED, enable the block as
cleared. Else, reset the clear flag for each block in the list(Christian)
- For merging the 2 cleared blocks compare as below,
drm_buddy_is_clear(block) != drm_buddy_is_clear(buddy)(Christian)
- Defragment the memory beginning from min_order
till the required memory space is available.
v2: (Matthew)
- Add a wrapper drm_buddy_free_list_internal for the freeing of blocks
operation within drm buddy.
- Write a macro block_incompatible() to allocate the required blocks.
- Update the xe driver for the drm_buddy_free_list change in arguments.
- add a warning if the two blocks are incompatible on
defragmentation
- call full defragmentation in the fini() function
- place a condition to test if min_order is equal to 0
- replace the list with safe_reverse() variant as we might
remove the block from the list.
v3:
- fix Gitlab user reported lockup issue.
- Keep DRM_BUDDY_HEADER_CLEAR define sorted(Matthew)
- modify to pass the root order instead max_order in fini()
function(Matthew)
- change bool 1 to true(Matthew)
- add check if min_block_size is power of 2(Matthew)
- modify the min_block_size datatype to u64(Matthew)
v4:
- rename the function drm_buddy_defrag with __force_merge.
- Include __force_merge directly in drm buddy file and remove
the defrag use in amdgpu driver.
- Remove list_empty() check(Matthew)
- Remove unnecessary space, headers and placement of new variables(Matthew)
- Add a unit test case(Matthew)
v5:
- remove force merge support to actual range allocation and not to bail
out when contains && split(Matthew)
- add range support to force merge function.
v6:
- modify the alloc_range() function clear page non merged blocks
allocation(Matthew)
- correct the list_insert function name(Matthew).
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Suggested-by: Christian König <christian.koenig@amd.com> Suggested-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240419063538.11957-1-Arunpravin.PaneerSelvam@amd.com Signed-off-by: Christian König <christian.koenig@amd.com>
Ville Syrjälä [Wed, 10 Apr 2024 18:01:39 +0000 (21:01 +0300)]
drm/edid: Parse topology block for all DispID structure v1.x
DisplayID spec v1.3 revision history notes do claim that
the toplogy block was added in v1.3 so requiring structure
v1.2 would seem correct, but there is at least one EDID in
edid.tv with a topology block and structure v1.0. And
there are also EDIDs with DisplayID structure v1.3 which
seems to be totally incorrect as DisplayID spec v1.3 lists
structure v1.2 as the only legal value.
Unfortunately I couldn't find copies of DisplayID spec
v1.0-v1.2 anywhere (even on vesa.org), so I'll have to
go on empirical evidence alone.
We used to parse the topology block on all v1.x
structures until the check for structure v2.0 was added.
Let's go back to doing that as the evidence does suggest
that there are DisplayIDs in the wild that would miss
out on the topology stuff otherwise.
Also toss out DISPLAY_ID_STRUCTURE_VER_12 entirely as
it doesn't appear we can really use it for anything.
I *think* we could technically skip all the structure
version checks as the block tags shouldn't conflict
between v2.0 and v1.x. But no harm in having a bit of
extra sanity checks I guess.
So far I'm not aware of any user reported regressions
from overly strict check, but I do know that it broke
igt/kms_tiled_display's fake DisplayID as that one
gets generated with structure v1.0.
Cc: Jani Nikula <jani.nikula@intel.com> Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com> Fixes: c5a486af9df7 ("drm/edid: parse Tiled Display Topology Data Block for DisplayID 2.0") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240410180139.21352-1-ville.syrjala@linux.intel.com Acked-by: Jani Nikula <jani.nikula@intel.com>
This add Khadas TS050 V2 Panel and make it compatible with old one.
Controller of V2 panel is "Himax HX8399-C" and the old panel is "NT35596".
In driver file, the only different between them is the timing squence.
Dan Carpenter [Mon, 8 Apr 2024 07:36:35 +0000 (10:36 +0300)]
drm/panthor: clean up some types in panthor_sched_suspend()
These variables should be u32 instead of u64 because they're only
storing u32 values. Also static checkers complain when we do:
suspended_slots &= ~upd_ctx.timedout_mask;
In this code "suspended_slots" is a u64 and "upd_ctx.timedout_mask". The
mask clears out the top 32 bits which would likely be a bug if anything
were stored there.
Dave Airlie [Mon, 22 Apr 2024 02:29:17 +0000 (12:29 +1000)]
Merge tag 'drm-misc-next-2024-04-19' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.10-rc1:
UAPI Changes:
- Add SIZE_HINTS property for cursor planes.
Cross-subsystem Changes:
Core Changes:
- Document the requirements and expectations of adding new
driver-specific properties.
- Assorted small fixes to ttm.
- More Kconfig fixes.
- Add struct drm_edid_product_id and helpers.
- Use drm device based logging in more drm functions.
- Fixes for drm-panic, and option to test it.
- Assorted small fixes and updates to edid.
- Add drm_crtc_vblank_crtc and use it in vkms, nouveau.
Driver Changes:
- Assorted small fixes and improvements to bridge/imx8mp-hdmi-tx, nouveau, ast, qaic, lima, vc4, bridge/anx7625, mipi-dsi.
- Add drm panic to simpledrm, mgag200, imx, ast.
- Use dev_err_probe in bridge/panel drivers.
- Add Innolux G121X1-L03, LG sw43408 panels.
- Use struct drm_edid in i915 bios parsing.
Merge tag 'char-misc-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver fixes from Greg KH:
"Here are some small char/misc and other driver fixes for 6.9-rc5.
Included in here are the following:
- binder driver fix for reported problem
- speakup crash fix
- mei driver fixes for reported problems
- comdei driver fix
- interconnect driver fixes
- rtsx driver fix
- peci.h kernel doc fix
All of these have been in linux-next for over a week with no reported
problems"
* tag 'char-misc-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
peci: linux/peci.h: fix Excess kernel-doc description warning
binder: check offset alignment in binder_get_object()
comedi: vmk80xx: fix incomplete endpoint checking
mei: vsc: Unregister interrupt handler for system suspend
Revert "mei: vsc: Call wake_up() in the threaded IRQ handler"
misc: rtsx: Fix rts5264 driver status incorrect when card removed
mei: me: disable RPL-S on SPS and IGN firmwares
speakup: Avoid crash on very long word
interconnect: Don't access req_list while it's being manipulated
interconnect: qcom: x1e80100: Remove inexistent ACV_PERF BCM
Merge tag 'driver-core-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull kernfs bugfix and documentation update from Greg KH:
"Here are two changes for 6.9-rc5 that deal with "driver core" stuff,
that do the following:
- sysfs reference leak fix
- embargoed-hardware-issues.rst update for Power
Both of these have been in linux-next for over a week with no reported
issues"
* tag 'driver-core-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation: embargoed-hardware-issues.rst: Add myself for Power
fs: sysfs: Fix reference leak in sysfs_break_active_protection()
Merge tag 'tty-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.9-rc5 that
resolve a bunch of reported problems. Included in here are:
- MAINTAINERS and .mailmap update for Richard Genoud
- serial core regression fixes from 6.9-rc1 changes
- pci id cleanups
- serial core crash fix
- stm32 driver fixes
- 8250 driver fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: stm32: Reset .throttled state in .startup()
serial: stm32: Return IRQ_NONE in the ISR if no handling happend
serial: core: Fix missing shutdown and startup for serial base port
serial: core: Clearing the circular buffer before NULLifying it
MAINTAINERS: mailmap: update Richard Genoud's email address
serial/pmac_zilog: Remove flawed mitigation for rx irq flood
serial: 8250_pci: Remove redundant PCI IDs
serial: core: Fix regression when runtime PM is not enabled
serial: mxs-auart: add spinlock around changing cts state
serial: 8250_dw: Revert: Do not reclock if already at correct rate
serial: 8250_lpc18xx: disable clks on error in probe()
Merge tag 'usb-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 6.9-rc5.
Included in here are:
- MAINTAINER file update for invalid email address
- usb-serial device id updates
- typec driver fixes
- thunderbolt / usb4 driver fixes
- usb core shutdown fixes
- cdc-wdm driver revert for reported problem in -rc1
- usb gadget driver fixes
- xhci driver fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
USB: serial: option: add Telit FN920C04 rmnet compositions
usb: dwc3: ep0: Don't reset resource alloc flag
Revert "usb: cdc-wdm: close race between read and workqueue"
USB: serial: option: add Rolling RW101-GL and RW135-GL support
USB: serial: option: add Lonsung U8300/U9300 product
USB: serial: option: add support for Fibocom FM650/FG650
USB: serial: option: support Quectel EM060K sub-models
USB: serial: option: add Fibocom FM135-GL variants
usb: misc: onboard_usb_hub: Disable the USB hub clock on failure
thunderbolt: Avoid notify PM core about runtime PM resume
thunderbolt: Fix wake configurations after device unplug
usb: dwc2: host: Fix dereference issue in DDMA completion flow.
usb: typec: mux: it5205: Fix ChipID value typo
MAINTAINERS: Drop Li Yang as their email address stopped working
usb: gadget: fsl: Initialize udc before using it
usb: Disable USB3 LPM at shutdown
usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error
usb: typec: tcpm: Correct the PDO counting in pd_set
usb: gadget: functionfs: Wait for fences before enqueueing DMABUF
usb: gadget: functionfs: Fix inverted DMA fence direction
...
Merge tag 'x86_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix CPU feature dependencies of GFNI, VAES, and VPCLMULQDQ
- Print the correct error code when FRED reports a bad event type
- Add a FRED-specific INT80 handler without the special dances that
need to happen in the current one
- Enable the using-the-default-return-thunk-but-you-should-not warning
only on configs which actually enable those special return thunks
- Check the proper feature flags when selecting BHI retpoline
mitigation
* tag 'x86_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpufeatures: Fix dependencies for GFNI, VAES, and VPCLMULQDQ
x86/fred: Fix incorrect error code printout in fred_bad_type()
x86/fred: Fix INT80 emulation for FRED
x86/retpolines: Enable the default thunk warning only on relevant configs
x86/bugs: Fix BHI retpoline check
Merge tag 'block-6.9-20240420' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Just two minor fixes that should go into the 6.9 kernel release, one
fixing a regression with partition scanning errors, and one fixing a
WARN_ON() that can get triggered if we race with a timer"
* tag 'block-6.9-20240420' of git://git.kernel.dk/linux:
blk-iocost: do not WARN if iocg was already offlined
block: propagate partition scanning errors to the BLKRRPART ioctl
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"This is a bit on the large side, mostly due to two changes:
- Changes to disable some broken PMU virtualization (see below for
details under "x86 PMU")
- Clean up SVM's enter/exit assembly code so that it can be compiled
without OBJECT_FILES_NON_STANDARD. This fixes a warning "Unpatched
return thunk in use. This should not happen!" when running KVM
selftests.
Everything else is small bugfixes and selftest changes:
- Fix a mostly benign bug in the gfn_to_pfn_cache infrastructure
where KVM would allow userspace to refresh the cache with a bogus
GPA. The bug has existed for quite some time, but was exposed by a
new sanity check added in 6.9 (to ensure a cache is either
GPA-based or HVA-based).
- Drop an unused param from gfn_to_pfn_cache_invalidate_start() that
got left behind during a 6.9 cleanup.
- Fix a math goof in x86's hugepage logic for
KVM_SET_MEMORY_ATTRIBUTES that results in an array overflow
(detected by KASAN).
- Fix a bug where KVM incorrectly clears root_role.direct when
userspace sets guest CPUID.
- Fix a dirty logging bug in the where KVM fails to write-protect
SPTEs used by a nested guest, if KVM is using Page-Modification
Logging and the nested hypervisor is NOT using EPT.
x86 PMU:
- Drop support for virtualizing adaptive PEBS, as KVM's
implementation is architecturally broken without an obvious/easy
path forward, and because exposing adaptive PEBS can leak host LBRs
to the guest, i.e. can leak host kernel addresses to the guest.
- Set the enable bits for general purpose counters in
PERF_GLOBAL_CTRL at RESET time, as done by both Intel and AMD
processors.
- Disable LBR virtualization on CPUs that don't support LBR
callstacks, as KVM unconditionally uses
PERF_SAMPLE_BRANCH_CALL_STACK when creating the perf event, and
would fail on such CPUs.
Tests:
- Fix a flaw in the max_guest_memory selftest that results in it
exhausting the supply of ucall structures when run with more than
256 vCPUs.
- Mark KVM_MEM_READONLY as supported for RISC-V in
set_memory_region_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (30 commits)
KVM: Drop unused @may_block param from gfn_to_pfn_cache_invalidate_start()
KVM: selftests: Add coverage of EPT-disabled to vmx_dirty_log_test
KVM: x86/mmu: Fix and clarify comments about clearing D-bit vs. write-protecting
KVM: x86/mmu: Remove function comments above clear_dirty_{gfn_range,pt_masked}()
KVM: x86/mmu: Write-protect L2 SPTEs in TDP MMU when clearing dirty status
KVM: x86/mmu: Precisely invalidate MMU root_role during CPUID update
KVM: VMX: Disable LBR virtualization if the CPU doesn't support LBR callstacks
perf/x86/intel: Expose existence of callback support to KVM
KVM: VMX: Snapshot LBR capabilities during module initialization
KVM: x86/pmu: Do not mask LVTPC when handling a PMI on AMD platforms
KVM: x86: Snapshot if a vCPU's vendor model is AMD vs. Intel compatible
KVM: x86: Stop compiling vmenter.S with OBJECT_FILES_NON_STANDARD
KVM: SVM: Create a stack frame in __svm_sev_es_vcpu_run()
KVM: SVM: Save/restore args across SEV-ES VMRUN via host save area
KVM: SVM: Save/restore non-volatile GPRs in SEV-ES VMRUN via host save area
KVM: SVM: Clobber RAX instead of RBX when discarding spec_ctrl_intercepted
KVM: SVM: Drop 32-bit "support" from __svm_sev_es_vcpu_run()
KVM: SVM: Wrap __svm_sev_es_vcpu_run() with #ifdef CONFIG_KVM_AMD_SEV
KVM: SVM: Create a stack frame in __svm_vcpu_run() for unwinding
KVM: SVM: Remove a useless zeroing of allocated memory
...
Merge tag 'powerpc-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix wireguard loading failure on pre-Power10 due to Power10 crypto
routines
- Fix papr-vpd selftest failure due to missing variable initialization
- Avoid unnecessary get/put in spapr_tce_platform_iommu_attach_dev()
Thanks to Geetika Moolchandani, Jason Gunthorpe, Michal Suchánek, Nathan
Lynch, and Shivaprasad G Bhat.
* tag 'powerpc-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc/papr-vpd: Fix missing variable initialization
powerpc/crypto/chacha-p10: Fix failure on non Power10
powerpc/iommu: Refactor spapr_tce_platform_iommu_attach_dev()
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A couple clk driver fixes, a build fix, and a deadlock fix:
- Mediatek mt7988 has broken PCIe because the wrong parent is used
- Mediatek clk drivers may deadlock when registering their clks
because the clk provider device is repeatedly runtime PM resumed
and suspended during probe and clk registration.
Resuming the clk provider device deadlocks with an ABBA deadlock
due to genpd_lock and the clk prepare_lock. The fix is to keep the
device runtime resumed while registering clks.
- Another runtime PM related deadlock, this time with disabling
unused clks during late init.
We get an ABBA deadlock where a device is runtime PM resuming (or
suspending) while the disabling of unused clks is happening in
parallel. That runtime PM action calls into the clk framework and
tries to grab the clk prepare_lock while the disabling of unused
clks holds the prepare_lock and is waiting for that runtime PM
action to complete.
The fix is to runtime resume all the clk provider devices before
grabbing the clk prepare_lock during disable unused.
- A build fix to provide an empty devm_clk_rate_exclusive_get()
function when CONFIG_COMMON_CLK=n"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: mediatek: mt7988-infracfg: fix clocks for 2nd PCIe port
clk: mediatek: Do a runtime PM get on controllers during probe
clk: Get runtime PM before walking tree for clk_summary
clk: Get runtime PM before walking tree during disable_unused
clk: Initialize struct clk_core kref earlier
clk: Don't hold prepare_lock when calling kref_put()
clk: Remove prepare_lock hold assertion in __clk_release()
clk: Provide !COMMON_CLK dummy for devm_clk_rate_exclusive_get()
Merge tag 'perf-tools-fixes-for-v6.9-2024-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"A random set of small bug fixes:
- Fix perf annotate TUI when used with data type profiling
- Work around BPF verifier about sighand lock checking
And a set of kernel header synchronization"
* tag 'perf-tools-fixes-for-v6.9-2024-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
tools/include: Sync arm64 asm/cputype.h with the kernel sources
tools/include: Sync asm-generic/bitops/fls.h with the kernel sources
tools/include: Sync x86 asm/msr-index.h with the kernel sources
tools/include: Sync x86 asm/irq_vectors.h with the kernel sources
tools/include: Sync x86 CPU feature headers with the kernel sources
tools/include: Sync uapi/sound/asound.h with the kernel sources
tools/include: Sync uapi/linux/kvm.h and asm/kvm.h with the kernel sources
tools/include: Sync uapi/linux/fs.h with the kernel sources
tools/include: Sync uapi/drm/i915_drm.h with the kernel sources
perf lock contention: Add a missing NULL check
perf annotate: Make sure to call symbol__annotate2() in TUI
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"Two fixes for the selftests:
- CONFIG_IOMMUFD_TEST needs CONFIG_IOMMUFD_DRIVER to work
- The kconfig fragment sshould include fault injection so the fault
injection test can work"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Add config needed for iommufd_fail_nth
iommufd: Add missing IOMMUFD_DRIVER kconfig for the selftest
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
- Add a missing mutex_destroy() in rxe
- Enhance the debugging print for cm_destroy failures to help debug
these
- Fix mlx5 MAD processing in cases where multiport devices are running
in switchedev mode
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/mlx5: Fix port number for counter query in multi-port configuration
RDMA/cm: Print the old state when cm_destroy_id gets timeout
RDMA/rxe: Fix the problem "mutex_destroy missing"
Merge tag '9p-fixes-for-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
Pull fs/9p fixes from Eric Van Hensbergen:
"This contains a reversion of one of the original 6.9 patches which
seems to have been the cause of most of the instability. It also
incorporates several fixes to legacy support and cache fixes.
There are few additional changes to improve stability, but I want
another week of testing before sending them upstream"
* tag '9p-fixes-for-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
fs/9p: drop inodes immediately on non-.L too
fs/9p: Revert "fs/9p: fix dups even in uncached mode"
fs/9p: remove erroneous nlink init from legacy stat2inode
9p: explicitly deny setlease attempts
fs/9p: fix the cache always being enabled on files with qid flags
fs/9p: translate O_TRUNC into OTRUNC
fs/9p: only translate RWX permissions for plain 9P2000
Merge tag 'fuse-fixes-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
- Fix two bugs in the new passthrough mode
- Fix a statx bug introduced in v6.6
- Fix code documentation
* tag 'fuse-fixes-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
cuse: add kernel-doc comments to cuse_process_init_reply()
fuse: fix leaked ENOSYS error on first statx call
fuse: fix parallel dio write on file open in passthrough mode
fuse: fix wrong ff->iomode state changes from parallel dio write
projects / users / jedix / linux-maple.git / log