Avoid this by testing the channel state before calling iop_do_send().
When sending, and iop_send_queue is empty, call iop_do_send() because
the channel is idle. If iop_send_queue is not empty, iop_do_send() will
get called later by iop_handle_send().
Currently we are not initializing the scmi clock with discrete rates
correctly. We fetch the min_rate and max_rate value only for clocks with
ranges and ignore the ones with discrete rates. This will lead to wrong
initialization of rate range when clock supports discrete rate.
Fix this by using the first and the last rate in the sorted list of the
discrete clock rates while registering the clock.
Link: https://lore.kernel.org/r/20200709081705.46084-2-sudeep.holla@arm.com Fixes: 6d6a1d82eaef7 ("clk: add support for clocks provided by SCMI") Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reported-and-tested-by: Dien Pham <dien.pham.ry@renesas.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
struct uclamp_rq was zeroed out entirely in assumption that in the first
call to uclamp_rq_inc() they'd be initialized correctly in accordance to
default settings.
But when next patch introduces a static key to skip
uclamp_rq_{inc,dec}() until userspace opts in to use uclamp, schedutil
will fail to perform any frequency changes because the
rq->uclamp[UCLAMP_MAX].value is zeroed at init and stays as such. Which
means all rqs are capped to 0 by default.
Fix it by making sure we do proper initialization at init without
relying on uclamp_rq_inc() doing it later.
Once regulators are disabled after kernel boot, on Espresso board silent
hang observed because of LDO7 being disabled. LDO7 actually provide
power to CPU cores and non-cpu blocks circuitries. Keep this regulator
always-on to fix this hang.
Fixes: 9589f7721e16 ("arm64: dts: Add S2MPS15 PMIC node on exynos7-espresso") Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Call exynos_cpu_power_up(cpunr) unconditionally. This is needed by the
big.LITTLE cpuidle driver and has no side-effects on other code paths.
The additional soft-reset call during little core power up has been added
to properly boot all cores on the Exynos5422-based boards with secure
firmware (like Odroid XU3/XU4 family). This however broke big.LITTLE
CPUidle driver, which worked only on boards without secure firmware (like
Peach-Pit/Pi Chromebooks). Apply the workaround only when board is
running under secure firmware.
Fixes: 833b5794e330 ("ARM: EXYNOS: reset Little cores when cpu is up") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
On commit 6ac93117ab00 ("blktrace: use existing disk debugfs directory")
merged on v4.12 Omar fixed the original blktrace code for request-based
drivers (multiqueue). This however left in place a possible crash, if you
happen to abuse blktrace while racing to remove / add a device.
We used to use asynchronous removal of the request_queue, and with that
the issue was easier to reproduce. Now that we have reverted to
synchronous removal of the request_queue, the issue is still possible to
reproduce, its however just a bit more difficult.
We essentially run two instances of break-blktrace which add/remove
a loop device, and setup a blktrace and just never tear the blktrace
down. We do this twice in parallel. This is easily reproduced with the
script run_0004.sh from break-blktrace [0].
We can end up with two types of panics each reflecting where we
race, one a failed blktrace setup:
debugfs: Directory 'loop0' with parent 'block' already present
This crash happens because of how blktrace uses the debugfs directory
where it places its files. Upon init we always create the same directory
which would be needed by blktrace but we only do this for make_request
drivers (multiqueue) block drivers. When you race a removal of these
devices with a blktrace setup you end up in a situation where the
make_request recursive debugfs removal will sweep away the blktrace
files and then later blktrace will also try to remove individual
dentries which are already NULL. The inverse is also possible and hence
the two types of use after frees.
We don't create the block debugfs directory on init for these types of
block devices:
* request-based block driver block devices
* every possible partition
* scsi-generic
And so, this race should in theory only be possible with make_request
drivers.
We can fix the UAF by simply re-using the debugfs directory for
make_request drivers (multiqueue) and only creating the ephemeral
directory for the other type of block devices. The new clarifications
on relying on the q->blk_trace_mutex *and* also checking for q->blk_trace
*prior* to processing a blktrace ensures the debugfs directories are
only created if no possible directory name clashes are possible.
This goes tested with:
o nvme partitions
o ISCSI with tgt, and blktracing against scsi-generic with:
o block
o tape
o cdrom
o media changer
o blktests
This patch is part of the work which disputes the severity of
CVE-2019-19770 which shows this issue is not a core debugfs issue, but
a misuse of debugfs within blktace.
Fixes: 6ac93117ab00 ("blktrace: use existing disk debugfs directory") Reported-by: syzbot+603294af2d01acfdd6da@syzkaller.appspotmail.com Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Omar Sandoval <osandov@fb.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Nicolai Stange <nstange@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: yu kuai <yukuai3@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
msm8916-pins.dtsi specifies "bias-pull-none" for most of the audio
pin configurations. This was likely copied from the qcom kernel fork
where the same property was used for these audio pins.
However, "bias-pull-none" actually does not exist at all - not in
mainline and not in downstream. I can only guess that the original
intention was to configure "no pull", i.e. bias-disable.
The crypto notify call occurs with a read mutex held so you must
not do any substantial work directly. In particular, you cannot
call crypto_alloc_* as they may trigger further notifications
which may dead-lock in the presence of another writer.
This patch fixes this by postponing the work into a work queue and
taking the same lock in the module init function.
While we're at it this patch also ensures that all RCU accesses are
marked appropriately (tested with sparse).
Finally this also reveals a race condition in module param show
function as it may be called prior to the module init function.
It's fixed by testing whether crct10dif_tfm is NULL (this is true
iff the init function has not completed assuming fallback is false).
Fixes: 11dcb1037f40 ("crc-t10dif: Allow current transform to be...") Fixes: b76377543b73 ("crc-t10dif: Pick better transform if one...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
When kobject_init_and_add() returns an error, it should be handled
because kobject_init_and_add() takes a reference even when it fails. If
this function returns an error, kobject_put() must be called to properly
clean up the memory associated with the object.
Therefore, replace calling kfree() and call kobject_put() and add a
missing kobject_put() in the edac_device_register_sysfs_main_kobj()
error path.
The puma gmac node currently uses opposite active-values for the
gmac phy reset pin. The gpio-declaration uses active-high while the
separate snps,reset-active-low property marks the pin as active low.
While on the kernel side this works ok, other DT users may get
confused - as seen with uboot right now.
So bring this in line and make both properties match, similar to the
other Rockchip board.
The puma vcc5v0_host regulator node currently uses opposite active-values
for the enable pin. The gpio-declaration uses active-high while the
separate enable-active-low property marks the pin as active low.
While on the kernel side this works ok, other DT users may get
confused - as seen with uboot right now.
So bring this in line and make both properties match, similar to the
gmac fix.
The lion gmac node currently uses opposite active-values for the
gmac phy reset pin. The gpio-declaration uses active-high while the
separate snps,reset-active-low property marks the pin as active low.
While on the kernel side this works ok, other DT users may get
confused - as seen with uboot right now.
So bring this in line and make both properties match, similar to the
other Rockchip board.
During sched domain init, we check whether non-topological SD_flags are
returned by tl->sd_flags(), if found, fire a waning and correct the
violation, but the code failed to correct the violation. Correct this.
Fixes: 143e1e28cb40 ("sched: Rework sched_domain topology definition") Signed-off-by: Peng Liu <iwtbavbm@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Link: https://lkml.kernel.org/r/20200609150936.GA13060@iZj6chx1xj0e0buvshuecpZ Signed-off-by: Sasha Levin <sashal@kernel.org>
With commit:
'b7031a02ec75 ("sched/fair: Add NOHZ_STATS_KICK")'
rebalance_domains of the local cfs_rq happens before others idle cpus have
updated nohz.next_balance and its value is overwritten.
Move the update of nohz.next_balance for other idles cpus before balancing
and updating the next_balance of local cfs_rq.
Also, the nohz.next_balance is now updated only if all idle cpus got a
chance to rebalance their domains and the idle balance has not been aborted
because of new activities on the CPU. In case of need_resched, the idle
load balance will be kick the next jiffie in order to address remaining
ilb.
The current implementation always uses rpmh_write_async, which doesn't
wait for completion. That's fine for disable requests since there's no
immediate need for the clocks and they can be disabled in the
background. However, for enable requests we need to ensure the clocks
are actually enabled before returning to the client. Otherwise, clients
can end up accessing their HW before the necessary clocks are enabled,
which can lead to bus errors.
Use the synchronous version of this API (rpmh_write) for enable requests
in the active set to ensure completion.
Completion isn't required for sleep/wake sets, since they don't take
effect until after we enter sleep. All rpmh requests are automatically
flushed prior to entering sleep.
Fixes: 9c7e47025a6b ("clk: qcom: clk-rpmh: Add QCOM RPMh clock driver") Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lkml.kernel.org/r/20200215021232.1149-1-mdtipton@codeaurora.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[sboyd@kernel.org: Reorg code a bit for readability, rename to 'wait' to
make local variable not conflict with completion.h mechanism] Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Liu Yong [Thu, 13 Aug 2020 06:56:44 +0000 (23:56 -0700)]
fs/io_uring.c: Fix uninitialized variable is referenced in io_submit_sqe
the commit <a4d61e66ee4a> ("<io_uring: prevent re-read of sqe->opcode>")
caused another vulnerability. After io_get_req(), the sqe_submit struct
in req is not initialized, but the following code defaults that
req->submit.opcode is available.
Signed-off-by: Liu Yong <pkfxxxing@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some devices, particularly the 3DConnexion Spacemouse wireless 3D
controllers, return more than just the battery capacity in the battery
report. The Spacemouse devices return an additional byte with a device
specific field. However, hidinput_query_battery_capacity() only
requests a 2 byte transfer.
When a spacemouse is connected via USB (direct wire, no wireless dongle)
and it returns a 3 byte report instead of the assumed 2 byte battery
report the larger transfer confuses and frightens the USB subsystem
which chooses to ignore the transfer. Then after 2 seconds assume the
device has stopped responding and reset it. This can be reproduced
easily by using a wired connection with a wireless spacemouse. The
Spacemouse will enter a loop of resetting every 2 seconds which can be
observed in dmesg.
This patch solves the problem by increasing the transfer request to 4
bytes instead of 2. The fix isn't particularly elegant, but it is simple
and safe to backport to stable kernels. A further patch will follow to
more elegantly handle battery reports that contain additional data.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Darren Hart <darren@dvhart.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Tested-by: Darren Hart <dvhart@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
__tracepoint_string's have their string data stored in .rodata, and an
address to that data stored in the "__tracepoint_str" section. Functions
that refer to those strings refer to the symbol of the address. Compiler
optimization can replace those address references with references
directly to the string data. If the address doesn't appear to have other
uses, then it appears dead to the compiler and is removed. This can
break the /tracing/printk_formats sysfs node which iterates the
addresses stored in the "__tracepoint_str" section.
Like other strings stored in custom sections in this header, mark these
__used to inform the compiler that there are other non-obvious users of
the address, so they should still be emitted.
Link: https://lkml.kernel.org/r/20200730224555.2142154-2-ndesaulniers@google.com Cc: Ingo Molnar <mingo@redhat.com> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: stable@vger.kernel.org Fixes: 102c9323c35a8 ("tracing: Add __tracepoint_string() to export string pointers") Reported-by: Tim Murray <timmurray@google.com> Reported-by: Simon MacMullen <simonmacm@google.com> Suggested-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
svcrdma expects that the payload falls precisely into the xdr_buf
page vector. This does not seem to be the case for
nfsd4_encode_readv().
This code is called only when fops->splice_read is missing or when
RQ_SPLICE_OK is clear, so it's not a noticeable problem in many
common cases.
Add new transport method: ->xpo_read_payload so that when a READ
payload does not fit exactly in rq_res's page vector, the XDR
encoder can inform the RPC transport exactly where that payload is,
without the payload's XDR pad.
That way, when a Write chunk is present, the transport knows what
byte range in the Reply message is supposed to be matched with the
chunk.
Note that the Linux NFS server implementation of NFS/RDMA can
currently handle only one Write chunk per RPC-over-RDMA message.
This simplifies the implementation of this fix.
The IMA_APPRAISE_BOOTPARAM config allows enabling different "ima_appraise="
modes - log, fix, enforce - at run time, but not when IMA architecture
specific policies are enabled. This prevents properly labeling the
filesystem on systems where secure boot is supported, but not enabled on the
platform. Only when secure boot is actually enabled should these IMA
appraise modes be disabled.
This patch removes the compile time dependency and makes it a runtime
decision, based on the secure boot state of that platform.
For retransmitted packets, TCP needs to resort to using TCP timestamps
for computing RTT samples. In the common case where the data and ACK
fall in the same 1-millisecond interval, TCP senders with millisecond-
granularity TCP timestamps compute a ca_rtt_us of 0. This ca_rtt_us
of 0 propagates to rs->rtt_us.
This value of 0 can cause performance problems for congestion control
modules. For example, in BBR, the zero min_rtt sample can bring the
min_rtt and BDP estimate down to 0, reduce snd_cwnd and result in a
low throughput. It would be hard to mitigate this with filtering in
the congestion control module, because the proper floor to apply would
depend on the method of RTT sampling (using timestamp options or
internally-saved transmission timestamps).
This fix applies a floor of 1 for the RTT sample delta from TCP
timestamps, so that seq_rtt_us, ca_rtt_us, and rs->rtt_us will be at
least 1 * (USEC_PER_SEC / TCP_TS_HZ).
Note that the receiver RTT computation in tcp_rcv_rtt_measure() and
min_rtt computation in tcp_update_rtt_min() both already apply a floor
of 1 timestamp tick, so this commit makes the code more consistent in
avoiding this edge case of a value of 0.
Signed-off-by: Jianfeng Wang <jfwang@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Kevin Yang <yyd@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The msg_zerocopy test pins the sender and receiver threads to separate
cores to reduce variance between runs.
But it hardcodes the cores and skips core 0, so it fails on machines
with the selected cores offline, or simply fewer cores.
The test mainly gives code coverage in automated runs. The throughput
of zerocopy ('-z') and non-zerocopy runs is logged for manual
inspection.
Continue even when sched_setaffinity fails. Just log to warn anyone
interpreting the data.
Fixes: 07b65c5b31ce ("test: add msg_zerocopy test") Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To take all the DSCP info in xmit, we should revert the patch and just push
all tos bits to ip_tunnel_ecn_encap(), which will handling ECN field later.
Fixes: 71130f29979c ("vxlan: fix tos value before xmit") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ovs_ct_put_key() is potentially copying uninitialized kernel stack memory
into socket buffers, since the compiler may leave a 3-byte hole at the end
of `struct ovs_key_ct_tuple_ipv4` and `struct ovs_key_ct_tuple_ipv6`. Fix
it by initializing `orig` with memset().
Fixes: 9dd7f8907c37 ("openvswitch: Add original direction conntrack tuple to sw_flow_key.") Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To fix it, it needs to disable bh on [1], so that the timer on [2]
wouldn't be triggered until rx_mode_wq_lock is released. So change
to use spin_lock_bh() instead of spin_lock().
Thanks to Paolo for helping with this.
v1->v2:
- post to netdev.
Reported-by: Rafael P. <rparrazo@redhat.com> Tested-by: Dean Nelson <dnelson@redhat.com> Fixes: 469998c861fa ("net: thunderx: prevent concurrent data re-writing by nicvf_set_rx_mode") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The GRE tunnel can be used to transport traffic that does not rely on a
Internet checksum (e.g. SCTP). The issue can be triggered creating a GRE
or GRETAP tunnel and transmitting SCTP traffic ontop of it where CRC
offload has been disabled. In order to fix the issue we need to
recompute the GRE csum in gre_gso_segment() not relying on the inner
checksum.
The issue is still present when we have the CRC offload enabled.
In this case we need to disable the CRC offload if we require GRE
checksum since otherwise skb_checksum() will report a wrong value.
Fixes: 90017accff61 ("sctp: Add GSO support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the accelerated networking SRIOV VF device has lost carrier
use the synthetic network device which is available as backup
path. This is a rare case since if VF link goes down, normally
the VMBus device will also loose external connectivity as well.
But if the communication is between two VM's on the same host
the VMBus device will still work.
Reported-by: "Shah, Ashish N" <ashish.n.shah@intel.com> Fixes: 0c195567a8f6 ("netvsc: transparent VF management") Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c:2419
alloc_channel() warn: passing zero to 'ERR_PTR'
setup_dpcon() should return ERR_PTR(err) instead of zero in error
handling case.
Fixes: d7f5a9d89a55 ("dpaa2-eth: defer probe on object allocate") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop the bogus endpoint-lookup helper which could end up accepting
interfaces based on endpoints belonging to unrelated altsettings.
Note that the returned bulk pipes and interrupt endpoint descriptor
were never actually used. Instead the bulk-endpoint numbers are
hardcoded to 1 and 2 (matching the specification), while the interrupt-
endpoint descriptor was assumed to be the third descriptor created by
USB core.
Try to bring some order to this by dropping the bogus lookup helper and
adding the missing endpoint sanity checks while keeping the interrupt-
descriptor assumption for now.
Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit cited below removed the RCU read-side critical section from
rtnl_fdb_dump() which means that the ndo_fdb_dump() callback is invoked
without RCU protection.
This results in the following warning [1] in the VXLAN driver, which
relied on the callback being invoked from an RCU read-side critical
section.
Fix this by calling rcu_read_lock() in the VXLAN driver, as already done
in the bridge driver.
[1]
WARNING: suspicious RCU usage 5.8.0-rc4-custom-01521-g481007553ce6 #29 Not tainted
-----------------------------
drivers/net/vxlan.c:1379 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by bridge/166:
#0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0xea/0x1090
Fixes: 5e6d24358799 ("bridge: netlink dump interface at par with brctl") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's a race between rxrpc_sendmsg setting up a call, but then failing to
send anything on it due to an error, and recvmsg() seeing the call
completion occur and trying to return the state to the user.
An assertion fails in rxrpc_recvmsg() because the call has already been
released from the socket and is about to be released again as recvmsg deals
with it. (The recvmsg_q queue on the socket holds a ref, so there's no
problem with use-after-free.)
We also have to be careful not to end up reporting an error twice, in such
a way that both returns indicate to userspace that the user ID supplied
with the call is no longer in use - which could cause the client to
malfunction if it recycles the user ID fast enough.
Fix this by the following means:
(1) When sendmsg() creates a call after the point that the call has been
successfully added to the socket, don't return any errors through
sendmsg(), but rather complete the call and let recvmsg() retrieve
them. Make sendmsg() return 0 at this point. Further calls to
sendmsg() for that call will fail with ESHUTDOWN.
Note that at this point, we haven't send any packets yet, so the
server doesn't yet know about the call.
(2) If sendmsg() returns an error when it was expected to create a new
call, it means that the user ID wasn't used.
(3) Mark the call disconnected before marking it completed to prevent an
oops in rxrpc_release_call().
(4) recvmsg() will then retrieve the error and set MSG_EOR to indicate
that the user ID is no longer known by the kernel.
Fixes: 357f5ef64628 ("rxrpc: Call rxrpc_release_call() on error in rxrpc_new_client_call()") Reported-by: syzbot+b54969381df354936d96@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
in recent kernel versions there are warnings about incorrect MTU size
like these:
eth0: mtu greater than device maximum
mtk_soc_eth 1b100000.ethernet eth0: error -22 setting MTU to include DSA overhead
Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports") Fixes: 72579e14a1d3 ("net: dsa: don't fail to probe if we couldn't set the MTU") Fixes: 7a4c53bee332 ("net: report invalid mtu value via netlink extack") Signed-off-by: Landen Chao <landen.chao@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ip6_route_info_create() invokes nexthop_get(), which increases the
refcount of the "nh".
When ip6_route_info_create() returns, local variable "nh" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
ip6_route_info_create(). When nexthops can not be used with source
routing, the function forgets to decrease the refcnt increased by
nexthop_get(), causing a refcnt leak.
Fix this issue by pulling up the error source routing handling when
nexthops can not be used with source routing.
Fixes: f88d8ea67fbd ("ipv6: Plumb support for nexthop object in a fib6_info") Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
IPV6_ADDRFORM causes resource leaks when converting an IPv6 socket
to IPv4, particularly struct ipv6_ac_socklist. Similar to
struct ipv6_mc_socklist, we should just close it on this path.
This bug can be easily reproduced with the following C program:
value = AF_INET;
setsockopt(s, SOL_IPV6, IPV6_ADDRFORM, &value, sizeof(value));
close(s);
return 0;
}
Reported-by: ch3332xr@gmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fib_trie_unmerge() is called with RTNL held, but not from an RCU
read-side critical section. This leads to the following warning [1] when
the FIB alias list in a leaf is traversed with
hlist_for_each_entry_rcu().
Since the function is always called with RTNL held and since
modification of the list is protected by RTNL, simply use
hlist_for_each_entry() and silence the warning.
[1]
WARNING: suspicious RCU usage 5.8.0-rc4-custom-01520-gc1f937f3f83b #30 Not tainted
-----------------------------
net/ipv4/fib_trie.c:1867 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/164:
#0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0
After that, the ethernet NIC is not functional anymore even after
reloading the r8169 module. After a reboot, this is reproducible by
copying a large file over the NIC to the MMC.
For some reason this is not reproducible when files are copied to a tmpfs.
* Little background on the fixup, by Manikanta Maddireddy:
"In the internal testing with dGPU on Tegra124, CmplTO is reported by
dGPU. This happened because FIFO queue in AFI(AXI to PCIe) module
get full by upstream posted writes. Back to back upstream writes
interleaved with infrequent reads, triggers RAW violation and CmpltTO.
This is fixed by reducing the posted write credits and by changing
updateFC timer frequency. These settings are fixed after stress test.
In the current case, RTL NIC is also reporting CmplTO. These settings
seems to be aggravating the issue instead of fixing it."
Link: https://lore.kernel.org/r/20200718100710.15398-1-kwizart@gmail.com Fixes: 191cd6fb5d2c ("PCI: tegra: Add SW fixup for RAW violations") Signed-off-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Manikanta Maddireddy <mmaddireddy@nvidia.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit moved too much work in kasan_init(). The allocation
of shadow pages has to be moved for the reason explained in that
patch, but the allocation of page tables still need to be done
before switching to the final hash table.
First revert the incorrect commit, following patch redoes it
properly.
set/removexattr on an exported filesystem should break NFS delegations.
This is true in general, but also for the upcoming support for
RFC 8726 (NFSv4 extended attribute support). Make sure that they do.
Additionally, they need to grow a _locked variant, since callers might
call this with i_rwsem held (like the NFS server code).
Cc: stable@vger.kernel.org # v4.9+ Cc: linux-fsdevel@vger.kernel.org Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a Linux hv_sock app tries to connect to a Service GUID on which no
host app is listening, a recent host (RS3+) sends a
CHANNELMSG_TL_CONNECT_RESULT (23) message to Linux and this triggers such
a warning:
unknown msgtype=23
WARNING: CPU: 2 PID: 0 at drivers/hv/vmbus_drv.c:1031 vmbus_on_msg_dpc
Actually Linux can safely ignore the message because the Linux app's
connect() will time out in 2 seconds: see VSOCK_DEFAULT_CONNECT_TIMEOUT
and vsock_stream_connect(). We don't bother to make use of the message
because: 1) it's only supported on recent hosts; 2) a non-trivial effort
is required to use the message in Linux, but the benefit is small.
So, let's not see the warning by silently ignoring the message.
Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
I compiled with AddressSanitizer and I had these memory leaks while I
was using the tep_parse_format function:
Direct leak of 28 byte(s) in 4 object(s) allocated from:
#0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe)
#1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985
#2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140
#3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206
#4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291
#5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299
#6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849
#7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161
#8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207
#9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786
#10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285
#11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369
#12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335
#13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389
#14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431
#15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251
#16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284
#17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593
#18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727
#19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048
#20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127
#21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152
#22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252
#23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347
#24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461
#25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673
#26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2)
The token variable in the process_dynamic_array_len function is
allocated in the read_expect_type function, but is not freed before
calling the read_token function.
Free the token variable before calling read_token in order to plug the
leak.
atmtcp_remove_persistent() invokes atm_dev_lookup(), which returns a
reference of atm_dev with increased refcount or NULL if fails.
The refcount leaks issues occur in two error handling paths. If
dev_data->persist is zero or PRIV(dev)->vcc isn't NULL, the function
returns 0 without decreasing the refcount kept by a local variable,
resulting in refcount leaks.
Fix the issue by adding atm_dev_put() before returning 0 both when
dev_data->persist is zero or PRIV(dev)->vcc isn't NULL.
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit applies to igb_reset_task the same changes that
were applied to ixgbe in commit 2f90b8657ec9 ("ixgbe: this patch
adds support for DCB to the kernel and ixgbe driver"),
commit 8f4c5c9fb87a ("ixgbe: reinit_locked() should be called with
rtnl_lock") and commit 88adce4ea8f9 ("ixgbe: fix possible race in
reset subtask").
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the case where a vendor command does not implement doit, and has no
flags set, doit would not be validated and a NULL pointer dereference
would occur, for example when invoking the vendor command via iw.
I encountered this while developing new vendor commands. Perhaps in
practice it is advisable to always implement doit along with dumpit,
but it seems reasonable to me to always check doit anyway, not just
when NEED_WDEV.
kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.
Callback function fw_cfg_sysfs_release_entry() in kobject_put()
can handle the pointer "entry" properly.
When the ASoC card registration fails and the codec component driver
never probes, the codec device is not initialized and therefore
memory for codec->wcaps is not allocated. This results in a NULL pointer
dereference when the codec driver suspend callback is invoked during
system suspend. Fix this by returning without performing any actions
during codec suspend/resume if the card was not registered successfully.
Modify mtk_gmac0_rgmii_adjust() so it can always be called.
mtk_gmac0_rgmii_adjust() sets-up the TRGMII clocks.
Signed-off-by: René van Dorst <opensource@vdorst.com> Signed-off-By: David Woodhouse <dwmw2@infradead.org> Tested-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Recent kernels have been reported to panic using the bochs_drm
framebuffer under qemu-system-sparc64 which was bisected to
commit 7a0483ac4ffc ("drm/bochs: switch to generic drm fbdev emulation").
The backtrace indicates that the shadow framebuffer copy in
drm_fb_helper_dirty_blit_real() is trying to access the real
framebuffer using a virtual address rather than use an IO access
typically implemented using a physical (ASI_PHYS) access on SPARC.
The fix is to replace the memcpy with memcpy_toio() from io.h.
memcpy_toio() uses writeb() where the original fbdev code
used sbus_memcpy_toio(). The latter uses sbus_writeb().
The difference between writeb() and sbus_memcpy_toio() is
that writeb() writes bytes in little-endian, where sbus_writeb() writes
bytes in big-endian. As endian does not matter for byte writes they are
the same. So we can safely use memcpy_toio() here.
Note that this only fixes bochs, in general fbdev helpers still have
issues with mixing up system memory and __iomem space. Fixing that will
require a lot more work.
v2:
- Added missing __iomem cast (kernel test robot)
- Made changelog readable and fix typos (Mark)
- Add flag to select iomem - and set it in the bochs driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reported-by: kernel test robot <lkp@intel.com> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20200709193016.291267-1-sam@ravnborg.org Link: https://patchwork.freedesktop.org/patch/msgid/20200725191012.GA434957@ravnborg.org Signed-off-by: Sasha Levin <sashal@kernel.org>
After commit 6e02318eaea5 ("nvme: add support for the Write Zeroes
command"), SK hynix PC400 becomes very slow with the following error
message:
[ 224.567695] blk_update_request: operation not supported error, dev nvme1n1, sector 499384320 op 0x9:(WRITE_ZEROES) flags 0x1000000 phys_seg 0 prio class 0]
SK Hynix PC400 has a buggy firmware that treats NLB as max value instead
of a range, so the NLB passed isn't a valid value to the firmware.
According to SK hynix there are three commands are affected:
- Write Zeroes
- Compare
- Write Uncorrectable
Right now only Write Zeroes is implemented, so disable it completely on
SK hynix PC400.
BugLink: https://bugs.launchpad.net/bugs/1872383 Cc: kyounghwan sohn <kyounghwan.sohn@sk.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
p9_fd_open just fgets file descriptors passed in from userspace, but
doesn't verify that they are valid for read or writing. This gets
cought down in the VFS when actually attempting a read or write, but
a new warning added in linux-next upsets syzcaller.
Fix this by just verifying the fds early on.
Link: http://lkml.kernel.org/r/20200710085722.435850-1-hch@lst.de Reported-by: syzbot+e6f77e16ff68b2434a2c@syzkaller.appspotmail.com Signed-off-by: Christoph Hellwig <hch@lst.de>
[Dominique: amend goto as per Doug Nazar's review] Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Several MFD child drivers register their class devices directly under
the parent device. This means you cannot blindly do devres conversions
so that deregistration ends up being tied to the parent device,
something which leads to use-after-free on driver unbind when the class
device is released while still being registered.
Fixes: 375446df95ee ("leds: 88pm860x: Use devm_led_classdev_register") Cc: stable <stable@vger.kernel.org> # 4.6 Cc: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several MFD child drivers register their class devices directly under
the parent device. This means you cannot blindly do devres conversions
so that deregistration ends up being tied to the parent device,
something which leads to use-after-free on driver unbind when the class
device is released while still being registered.
Fixes: 50154e29e5cc ("leds: lm3533: Use devm_led_classdev_register") Cc: stable <stable@vger.kernel.org> # 4.6 Cc: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several MFD child drivers register their class devices directly under
the parent device. This means you cannot blindly do devres conversions
so that deregistration ends up being tied to the parent device,
something which leads to use-after-free on driver unbind when the class
device is released while still being registered.
Fixes: eed16255d66b ("leds: da903x: Use devm_led_classdev_register") Cc: stable <stable@vger.kernel.org> # 4.6 Cc: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several MFD child drivers register their class devices directly under
the parent device. This means you cannot use devres so that
deregistration ends up being tied to the parent device, something which
leads to use-after-free on driver unbind when the class device is
released while still being registered.
Fixes: 11e1bbc116a7 ("leds: lm36274: Introduce the TI LM36274 LED driver") Cc: stable <stable@vger.kernel.org> # 5.3 Cc: Dan Murphy <dmurphy@ti.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several MFD child drivers register their class devices directly under
the parent device. This means you cannot blindly do devres conversions
so that deregistration ends up being tied to the parent device,
something which leads to use-after-free on driver unbind when the class
device is released while still being registered.
Fixes: 8d3b6a4001ce ("leds: wm831x-status: Use devm_led_classdev_register") Cc: stable <stable@vger.kernel.org> # 4.6 Cc: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When doing a "write" ioctl call, properly check that we have permissions
to do so before copying anything from userspace or anything else so we
can "fail fast". This includes also covering the MEMWRITE ioctl which
previously missed checking for this.
vgacon_scrollback_update() always leaves enbough room in the scrollback
buffer for the next call, but if the console size changed that room
might not actually be enough, and so we need to re-check.
The check should be in the loop since vgacon_scrollback_cur->tail is
updated in the loop and count may be more than 1 when triggered by CSI M,
as Jiri's PoC:
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <fcntl.h>
int main(int argc, char** argv)
{
int fd = open("/dev/tty1", O_RDWR);
unsigned short size[3] = {25, 200, 0};
ioctl(fd, 0x5609, size); // VT_RESIZE
write(fd, "\e[1;1H", 6);
for (int i = 0; i < 30; i++)
write(fd, "\e[10M", 5);
}
It leads to various crashes as vgacon_scrollback_update writes out of
the buffer:
BUG: unable to handle page fault for address: ffffc900001752a0
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
RIP: 0010:mutex_unlock+0x13/0x30
...
Call Trace:
n_tty_write+0x1a0/0x4d0
tty_write+0x1a0/0x2e0
Or to KASAN reports:
BUG: KASAN: slab-out-of-bounds in vgacon_scroll+0x57a/0x8ed
This fixes CVE-2020-14331.
Reported-by: 张云海 <zhangyunhai@nsfocus.com> Reported-by: Yang Yingliang <yangyingliang@huawei.com> Reported-by: Kyungtae Kim <kt0755@gmail.com> Fixes: 15bdab959c9b ([PATCH] vgacon: Add support for soft scrollback) Cc: stable@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Solar Designer <solar@openwall.com> Cc: "Srivatsa S. Bhat" <srivatsa@csail.mit.edu> Cc: Anthony Liguori <aliguori@amazon.com> Cc: Yang Yingliang <yangyingliang@huawei.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Yunhai Zhang <zhangyunhai@nsfocus.com> Link: https://lore.kernel.org/r/9fb43895-ca91-9b07-ebfd-808cf854ca95@nsfocus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When running `make coccicheck` in report mode using the
add_namespace.cocci file, it will fail for files that contain
MODULE_LICENSE. Those match the replacement precondition, but spatch
errors out as virtual.ns is not set.
In order to fix that, add the virtual rule nsdeps and only do search and
replace if that rule has been explicitly requested.
In order to make spatch happy in report mode, we also need a dummy rule,
as otherwise it errors out with "No rules apply". Using a script:python
rule appears unrelated and odd, but this is the shortest I could come up
with.
Adjust scripts/nsdeps accordingly to set the nsdeps rule when run trough
`make nsdeps`.
smk_write_relabel_self() frees memory from the task's credentials with
no locking, which can easily cause a use-after-free because multiple
tasks can share the same credentials structure.
Fix this by using prepare_creds() and commit_creds() to correctly modify
the task's credentials.
Reproducer for "BUG: KASAN: use-after-free in smk_write_relabel_self":
Binder is designed such that a binder_proc never has references to
itself. If this rule is violated, memory corruption can occur when a
process sends a transaction to itself; see e.g.
<https://syzkaller.appspot.com/bug?extid=09e05aba06723a94d43d>.
There is a remaining edgecase through which such a transaction-to-self
can still occur from the context of a task with BINDER_SET_CONTEXT_MGR
access:
- task A opens /dev/binder twice, creating binder_proc instances P1
and P2
- P1 becomes context manager
- P2 calls ACQUIRE on the magic handle 0, allocating index 0 in its
handle table
- P1 dies (by closing the /dev/binder fd and waiting a bit)
- P2 becomes context manager
- P2 calls ACQUIRE on the magic handle 0, allocating index 1 in its
handle table
[this triggers a warning: "binder: 1974:1974 tried to acquire
reference to desc 0, got 1 instead"]
- task B opens /dev/binder once, creating binder_proc instance P3
- P3 calls P2 (via magic handle 0) with (void*)1 as argument (two-way
transaction)
- P2 receives the handle and uses it to call P3 (two-way transaction)
- P3 calls P2 (via magic handle 0) (two-way transaction)
- P2 calls P2 (via handle 1) (two-way transaction)
And then, if P2 does *NOT* accept the incoming transaction work, but
instead closes the binder fd, we get a crash.
Solve it by preventing the context manager from using ACQUIRE on ref 0.
There shouldn't be any legitimate reason for the context manager to do
that.
Additionally, print a warning if someone manages to find another way to
trigger a transaction-to-self bug in the future.
The drm/omap driver was fixed to correct an issue where using a
divider of 32 breaks the DSS despite the TRM stating 32 is a valid
number. Through experimentation, it appears that 31 works, and
it is consistent with the value used by the drm/omap driver.
This patch fixes the divider for fbdev driver instead of the drm.
Fixes: f76ee892a99e ("omapfb: copy omapdss & displays for omapfb") Cc: <stable@vger.kernel.org> #4.5+ Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Dave Airlie <airlied@gmail.com> Cc: Rob Clark <robdclark@gmail.com>
[b.zolnierkie: mark patch as applicable to stable 4.5+ (was 4.9+)] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200630182636.439015-1-aford173@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check upon `num_rsp` is insufficient. A malformed event packet with a
large `num_rsp` number makes hci_extended_inquiry_result_evt() go out
of bounds. Fix it.
The variable authmode can be uninitialized. The danger would be if
it equals to _WPA_IE_ID_ (0xdd) or _WPA2_IE_ID_ (0x33). We can avoid
this by setting it to zero instead. This is the approach that was
used in the rtl8723bs driver.
Fixes: 7b464c9fa5cc ("staging: r8188eu: Add files for new driver - part 4") Co-developed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200728072153.9202-1-dinghao.liu@zju.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
when firmware fails to load we should not call unregister_netdev()
this patch fixes a race condition between rtl871x_load_fw_cb() and
r871xu_dev_remove() and fixes the bug reported by syzbot
syzbot report [1] describes a deadlock when write operation against an
ashmem fd executed at the time when ashmem is shrinking its cache results
in the following lock sequence:
kswapd takes fs_reclaim and then inode_lock while generic_perform_write
takes inode_lock and then fs_reclaim. However ashmem does not support
writing into backing shmem with a write syscall. The only way to change
its content is to mmap it and operate on mapped memory. Therefore the race
that lockdep is warning about is not valid. Resolve this by introducing a
separate lockdep class for the backing shmem inodes.
Some ioctls via OSS sequencer API may race and lead to UAF when the
port create and delete are performed concurrently, as spotted by a
couple of syzkaller cases. This patch is an attempt to address it by
serializing the ioctls with the existing register_mutex.
Basically OSS sequencer API is an obsoleted interface and was designed
without much consideration of the concurrency. There are very few
applications with it, and the concurrent performance isn't asked,
hence this "big hammer" approach should be good enough.
When the ZxR headphone gain control was added, the ca0132_switch_get
function was not updated, which meant that the changes to the control
state were not saved when entering/exiting alsamixer.
There are several Loongson-3 based laptops produced by CZC or Lemote,
they use alc269/alc662 codecs and need specific pin-tables, this patch
add their pin-tables.
This reverts commit 9a6418487b56 ("ALSA: hda: call runtime_allow()
for all hda controllers").
The reverted patch already introduced some regressions on some
machines:
- on gemini-lake machines, the error of "azx_get_response timeout"
happens in the hda driver.
- on the machines with alc662 codec, the audio jack detection doesn't
work anymore.
Guoyu Huang [Wed, 5 Aug 2020 19:10:25 +0000 (13:10 -0600)]
io_uring: Fix use-after-free in io_sq_wq_submit_work()
when ctx->sqo_mm is zero, io_sq_wq_submit_work() frees 'req'
without deleting it from 'task_list'. After that, 'req' is
accessed in io_ring_ctx_wait_and_kill() which lead to
a use-after-free.
Jens Axboe [Wed, 5 Aug 2020 18:34:09 +0000 (12:34 -0600)]
io_uring: prevent re-read of sqe->opcode
Liu reports that he can trigger a NULL pointer dereference with
IORING_OP_SENDMSG, by changing the sqe->opcode after we've validated
that the previous opcode didn't need a file and didn't assign one.
Ensure we validate and read the opcode only once.
Reported-by: Liu Yong <pkfxxxing@gmail.com> Tested-by: Liu Yong <pkfxxxing@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I've confirmed that the ASMedia ASM1142 has the same problem as the
ASM2142/ASM3142, in that it too reports that it supports 64-bit DMA
addresses when in fact it does not. As with the ASM2142/ASM3142, this
can cause problems on systems where the upper bits matter, and adding
the XHCI_NO_64BIT_SUPPORT quirk completely fixes the issue.
Not all ASMedia host controllers have a device ID that matches its part
number. #define some of these IDs to make it clearer at a glance which
chips require what quirks.
In previous patches that added support for new iowarrior devices, the
handling of the report size was not done correct.
Fix that up and update the copyright date for the driver
Reworked from an original patch written by Christoph Jung.
Fixes: bab5417f5f01 ("USB: misc: iowarrior: add support for the 100 device") Fixes: 5f6f8da2d7b5 ("USB: misc: iowarrior: add support for the 28 and 28L devices") Fixes: 461d8deb26a7 ("USB: misc: iowarrior: add support for 2 OEMed devices") Cc: stable <stable@kernel.org> Reported-by: Christoph Jung <jung@codemercs.com> Link: https://lore.kernel.org/r/20200726094939.1268978-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When running qmi-firmware-update on the Sierra Wireless EM7305 in a Toshiba
laptop, it changed product ID to 0x9062 when entering QDL mode:
usb 2-4: new high-speed USB device number 78 using xhci_hcd
usb 2-4: New USB device found, idVendor=1199, idProduct=9062, bcdDevice= 0.00
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-4: Product: EM7305
usb 2-4: Manufacturer: Sierra Wireless, Incorporated
The upgrade could complete after running
# echo 1199 9062 > /sys/bus/usb-serial/drivers/qcserial/new_id
qcserial 2-4:1.0: Qualcomm USB modem converter detected
usb 2-4: Qualcomm USB modem converter now attached to ttyUSB0
The sockmap code currently ignores the value of attach_bpf_fd when
detaching a program. This is contrary to the usual behaviour of
checking that attach_bpf_fd represents the currently attached
program.
Ensure that attach_bpf_fd is indeed the currently attached
program. It turns out that all sockmap selftests already do this,
which indicates that this is unlikely to cause breakage.
Fix sockmap tests which rely on old bpf_prog_dispatch behaviour.
In the first case, the tests check that detaching without giving
a program succeeds. Since these are not the desired semantics,
invert the condition. In the second case, the clean up code doesn't
supply the necessary program fds.
Fixes: bb0de3131f4c ("bpf: sockmap: Require attach_bpf_fd when detaching a program") Reported-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20200709115151.75829-1-lmb@cloudflare.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
do {
ret = read(fd, buf, BUF_SIZE);
printf("ret=%d\n",ret);
if (ret < 0) {
perror("write test.jar failed");
}
} while (ret > 0);
free(buf);
close(fd);
}
(3) Compile the source file:
$gcc direct_io_read_file.c -D_GNU_SOURCE
(4) Run the test program:
$./a.out
The result is as following:
ret=1024
ret=1024
ret=952
ret=-1
write test.jar failed: Invalid argument.
I have tested this program on XFS filesystem, XFS does not have
this problem, because XFS use iomap_dio_rw() to do direct I/O
read. And the comparing between read offset and file size is done
in iomap_dio_rw(), the code is as following:
...only when "pos < size", direct I/O can be done, or 0 will be return.
I have tested the fix patch on Ext4, it is up to the mustard of
EINVAL in man2(read) as following:
#include <unistd.h>
ssize_t read(int fd, void *buf, size_t count);
EINVAL
fd is attached to an object which is unsuitable for reading;
or the file was opened with the O_DIRECT flag, and either the
address specified in buf, the value specified in count, or the
current file offset is not suitably aligned.
So I think this patch can be applied to fix ext4 direct I/O error.
However Ext4 introduces direct I/O read using iomap infrastructure
on kernel 5.5, the patch is commit <b1b4705d54ab>
("ext4: introduce direct I/O read using iomap infrastructure"),
then Ext4 will be the same as XFS, they all use iomap_dio_rw() to do direct
I/O read. So this problem does not exist on kernel 5.5 for Ext4.
>From above description, we can see this problem exists on all the kernel
versions between kernel 3.14 and kernel 5.4. It will cause the Applications
to fail to read. For example, when the search service downloads a new full
index file, the search engine is loading the previous index file and is
processing the search request, it can not use buffer io that may squeeze
the previous index file in use from pagecache, so the serch service must
use direct I/O read.
Please apply this patch on these kernel versions, or please use the method
on kernel 5.5 to fix this problem.
Fixes: 9fe55eea7e4b ("Fix race when checking i_size on direct i/o read") Reviewed-by: Jan Kara <jack@suse.cz> Co-developed-by: Wang Long <wanglong19@meituan.com> Signed-off-by: Wang Long <wanglong19@meituan.com> Signed-off-by: Jiang Ying <jiangying8582@126.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Zyngier [Wed, 5 Aug 2020 11:10:44 +0000 (12:10 +0100)]
arm64: Workaround circular dependency in pointer_auth.h
With the backport of f227e3ec3b5c ("random32: update the net random
state on interrupt and activity") and its associated fixes, the
arm64 build explodes early:
In file included from ../include/linux/smp.h:67,
from ../include/linux/percpu.h:7,
from ../include/linux/prandom.h:12,
from ../include/linux/random.h:118,
from ../arch/arm64/include/asm/pointer_auth.h:6,
from ../arch/arm64/include/asm/processor.h:39,
from ../include/linux/mutex.h:19,
from ../include/linux/kernfs.h:12,
from ../include/linux/sysfs.h:16,
from ../include/linux/kobject.h:20,
from ../include/linux/of.h:17,
from ../include/linux/irqdomain.h:35,
from ../include/linux/acpi.h:13,
from ../include/acpi/apei.h:9,
from ../include/acpi/ghes.h:5,
from ../include/linux/arm_sdei.h:8,
from ../arch/arm64/kernel/asm-offsets.c:10:
../arch/arm64/include/asm/smp.h:100:29: error: field ‘ptrauth_key’ has
incomplete type
This is due to struct ptrauth_keys_kernel not being defined before
we transitively include asm/smp.h from linux/random.h.
Paper over it by moving the inclusion of linux/random.h *after* the
type has been defined.
Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The addition of percpu.h to the list of includes in random.h revealed
some circular dependencies on arm64 and possibly other platforms. This
include was added solely for the pseudo-random definitions, which have
nothing to do with the rest of the definitions in this file but are
still there for legacy reasons.
This patch moves the pseudo-random parts to linux/prandom.h and the
percpu.h include with it, which is now guarded by _LINUX_PRANDOM_H and
protected against recursive inclusion.
A further cleanup step would be to remove this from <linux/random.h>
entirely, and make people who use the prandom infrastructure include
just the new header file. That's a bit of a churn patch, but grepping
for "prandom_" and "next_pseudo_random32" "struct rnd_state" should
catch most users.
But it turns out that that nice cleanup step is fairly painful, because
a _lot_ of code currently seems to depend on the implicit include of
<linux/random.h>, which can currently come in a lot of ways, including
such fairly core headfers as <linux/net.h>.
So the "nice cleanup" part may or may never happen.
Fixes: 1c9df907da83 ("random: fix circular include dependency on arm64 after addition of percpu.h") Tested-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It turns out that the plugin right now ends up being really unhappy
about the change from 'static' to 'extern' storage that happened in
commit f227e3ec3b5c ("random32: update the net random state on interrupt
and activity").
This is probably a trivial fix for the latent_entropy plugin, but for
now, just remove net_rand_state from the list of things the plugin
worries about.
Daniel Díaz and Kees Cook independently reported that commit f227e3ec3b5c ("random32: update the net random state on interrupt and
activity") broke arm64 due to a circular dependency on include files
since the addition of percpu.h in random.h.
The correct fix would definitely be to move all the prandom32 stuff out
of random.h but for backporting, a smaller solution is preferred.
This one replaces linux/percpu.h with asm/percpu.h, and this fixes the
problem on x86_64, arm64, arm, and mips. Note that moving percpu.h
around didn't change anything and that removing it entirely broke
differently. When backporting, such options might still be considered
if this patch fails to help.
[ It turns out that an alternate fix seems to be to just remove the
troublesome <asm/pointer_auth.h> remove from the arm64 <asm/smp.h>
that causes the circular dependency.
But we might as well do the whole belt-and-suspenders thing, and
minimize inclusion in <linux/random.h> too. Either will fix the
problem, and both are good changes. - Linus ]
Reported-by: Daniel Díaz <daniel.diaz@linaro.org> Reported-by: Kees Cook <keescook@chromium.org> Tested-by: Marc Zyngier <maz@kernel.org> Fixes: f227e3ec3b5c Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix build error for the case:
defined(CONFIG_SMP) && !defined(CONFIG_CPU_V6)
config: keystone_defconfig
CC arch/arm/kernel/signal.o
In file included from ../include/linux/random.h:14,
from ../arch/arm/kernel/signal.c:8:
../arch/arm/include/asm/percpu.h: In function ‘__my_cpu_offset’:
../arch/arm/include/asm/percpu.h:29:34: error: ‘current_stack_pointer’ undeclared (first use in this function); did you mean ‘user_stack_pointer’?
: "Q" (*(const unsigned long *)current_stack_pointer));
^~~~~~~~~~~~~~~~~~~~~
user_stack_pointer
Fixes: f227e3ec3b5c ("random32: update the net random state on interrupt and activity") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This modifies the first 32 bits out of the 128 bits of a random CPU's
net_rand_state on interrupt or CPU activity to complicate remote
observations that could lead to guessing the network RNG's internal
state.
Note that depending on some network devices' interrupt rate moderation
or binding, this re-seeding might happen on every packet or even almost
never.
In addition, with NOHZ some CPUs might not even get timer interrupts,
leaving their local state rarely updated, while they are running
networked processes making use of the random state. For this reason, we
also perform this update in update_process_times() in order to at least
update the state when there is user or system activity, since it's the
only case we care about.
Reported-by: Amit Klein <aksecurity@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Eric Dumazet <edumazet@google.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / users / dwmw2 / linux.git / log