Currently, ipmi driver fakes it self as a userland process
to access ipmi vldc channel.
This patch uses new cleaner vldc kernel interface that is added
for ipmi driver.
Signed-off-by: Atish Patra <atish.patra@oracle.com> Reviewed-by: Rob Gardner <rob.gardner@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com>
(cherry picked from commit 7a0d1deac3289130680a5ab1626c609b76c9f053)
IPMI driver will have a stale vldc file pointer if ILOM resets.
Thus, IPMI drivers failed to work after the reset is complete.
IPMI driver need to close that file pointer and open another after
ilom reset is complete.
This is achieved by trying to open vldc file in every 15 seconds
in a process context. As vldc or ldc can not detect a ILOM reset,
this is the best possible approach for the problem.
This is based on Rob's patch for mc reset fix. Signed-off-by: Atish Patra <atish.patra@oracle.com> Reviewed-by: Rob Gardner <rob.gardner@oracle.com>
(cherry picked from commit cf5139791a8241fcab1f59c1da0a9058def661f2) Signed-off-by: Allen Pais <allen.pais@oracle.com>
Vijay Kumar [Sun, 2 Oct 2016 21:40:18 +0000 (15:40 -0600)]
sparc64:mm/hugetlb: Set correct huge_pte_count index for 8M hugepages
Both set_huge_pte_at(...) and huge_ptep_get_and_clear(...)
call real_hugepage_size_to_pte_count_idx(hugepage_size) when adjusting
huge_pte_count. For 8MB/4MB the huge_pte_count index computed is 1(one).
This is incorrect because this index is for xl_hugepages. So the tsb
grow code in the mm fault path does not grow the tsb for 8MB/4MB
hugepages.
Signed-off-by: Bob Picco <bob.picco@oracle.com> Signed-off-by: Vijay Kumar <vijay.ac.kumar@oracle.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Tested-by: Mike Kravetz <mike.kravetz@oracle.com>
Orabug: 24490586
(cherry picked from commit c928d6fccaa59bd4b6cffc904144fa67a4726ff6) Signed-off-by: Allen Pais <allen.pais@oracle.com>
As pages are allocated by a task, counters in the mm and mm_context
structures are used to track these allocations. These counters are
then used to size the task's TSBs. This patch addresses issues where
counts are not maintained properly, and TSBs of the incorrect size
are created for the task.
- hugetlb pages are not included in a task's RSS calculations. However,
the routine do_sparc64_fault() calculates the size of base TSB block
by subtracting total size of hugetlb pages from RSS. Since hugetlb
size is likely larger than RSS, a negative value is passed as an
unsigned value to the routine which allocates the TSB block. The
'negative unsigned' value appears as a really big value and results in
a maximum sized base TSB being allocated. This is the case for almost
all tasks using hugetlb pages.
THP pages are also counted in huge_pte_count[MM_PTES_HUGE]. And
unlike hugetlb pages, THP pages are included in a task's RSS.
Therefore, both hugetlb and THP can not be counted for in
huge_pte_count[MM_PTES_HUGE].
Add a new counter thp_pte_count for THP pages, and use this value for
adjusting RSS to size the base TSB.
- In order to save memory, THP makes use of a huge zero page. This huge
zero page does not count against a task's RSS, but it does consume TSB
entries. Therefore, count huge zero page entries in
huge_pte_count[MM_PTES_HUGE].
- Accounting of THP pages is done in the routine set_pmd_at().
Unfortunately, this does not catch the case where a THP page is split.
To handle this case, decrement the count in pmdp_invalidate().
pmdp_invalidate is only called when splitting a THP. However, 'sanity
checks' are added in case it is ever called for other purposes.
- huge_pte_count[MM_PTES_HUGE] tracks the number of HPAGE_SIZE (8M) pages
used by the task. This value is used to size the TSB for HPAGE_SIZE
pages. However, for each HPAGE_SIZE (8M) there are two REAL_HPAGE_SIZE
(4M) pages. The TSB contains an entry for each REAL_HPAGE_SIZE page.
Therefore, the number of REAL_HPAGE_SIZE pages used by the task should
be used to size the MM_PTES_HUGE TSB. A new compile time constant
REAL_HPAGE_PER_HPAGE is used to multiply huge_pte_count[MM_PTES_HUGE]
before sizing the TSB.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Vijay Kumar <vijay.ac.kumar@oracle.com> Tested-by: Vijay Kumar <vijay.ac.kumar@oracle.com>
(cherry picked from commit 417fc85e759b6d4c4602fbdbdd5375ec5ddf2cb0) Signed-off-by: Allen Pais <allen.pais@oracle.com>
Currently, irq stack bootmem is allocated for all possible cpus
before nr_cpus value changes the list of possible cpus. As a result,
there is unnecessary wastage of bootmemory.
Move the irq stack bootmem allocation so that it happens after
possible cpu list is modified based on nr_cpus value.
If kernel boot parameter nr_cpus is set, it should define the number
of CPUs that can ever be available in the system i.e.
cpu_possible_mask. setup_nr_cpu_ids() overrides the nr_cpu_ids based
on the cpu_possible_mask during kernel initialization. If
cpu_possible_mask is not set based on the nr_cpus value, earlier part
of the kernel would be initialized using nr_cpus value leading to a
kernel crash.
Set cpu_possible_mask based on nr_cpus value. Thus setup_nr_cpu_ids()
becomes redundant and does not corrupt nr_cpu_ids value.
Signed-off-by: Atish Patra <atish.patra@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Reviewed-by: Vijay Kumar <vijay.ac.kumar@oracle.com>
(cherry picked from commit f539e5b332d8d969301bc43f076d905569c2b12c) Signed-off-by: Allen Pais <allen.pais@oracle.com>
Nitin Gupta [Thu, 25 Aug 2016 18:33:27 +0000 (11:33 -0700)]
sparc64: Fix sentinel page table entry for 16G
Currently no page table trimming is done for 16G pages
so _PAGE_PMD_HUGE must not be set for 16G. Also, for
this size, trimming would be done at PUD level, so
this flag should not be set anyways.
Nitin Gupta [Thu, 2 Jun 2016 22:14:42 +0000 (15:14 -0700)]
sparc64: Trim page tables for 2G pages
Currently mapping a 2G page requires 256*1024 PTE entries.
This results in large amounts of RAM to be used just for
storing page tables. We now use 256 PMD entries to map a
2G page which is much more space efficient.
Nitin Gupta [Fri, 27 May 2016 21:58:13 +0000 (14:58 -0700)]
sparc64: Trim page tables at PMD for hugepages
For PMD aligned (8M) hugepages, we currently allocate
all four page table levels which is wasteful. We now
allocate till PMD level only which saves memory usage
from page tables.
Signed-off-by: Larry Bassel <larry.bassel@oracle.com> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com>
All signal frames must be at least 16-byte aligned, because that is
the alignment we explicitly create when we build signal return stack
frames.
All stack pointers must be at least 8-byte aligned.
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
arch/sparc/kernel/signal32.c - modified patch context so that it would apply
Signed-off-by: Larry Bassel <larry.bassel@oracle.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com>
Number of context IDs supported by the hardware
is reported via machine descriptor for sun4v
systems. For systems > T3, 16 bits are used
to represent context ID in the HW. For these
systems the context ID wrap around happens if
there are more that 65536 processes running
simultaneously. For systems older than that
13 bits are used and the context ID wraps around
if there are 8192 processes running simultaneously.
Reviewed-by: Babu Moger <babu.moger@oracle.com> Acked-by: Rob Gardner <rob.gardner@oracle.com> Signed-off-by: Sanath Kumar <sanath.s.kumar@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com>
David S. Miller [Sun, 29 May 2016 03:41:12 +0000 (20:41 -0700)]
sparc64: Fix return from trap window fill crashes.
We must handle data access exception as well as memory address unaligned
exceptions from return from trap window fill faults, not just normal
TLB misses.
Otherwise we can get an OOPS that looks like this:
The window trap handlers are slightly clever, the trap table entries for them are
composed of two pieces of code. First comes the code that actually performs
the window fill or spill trap handling, and then there are three instructions at
the end which are for exception processing.
And the way this works is that if any of those memory accesses
generate an exception, the exception handler can revector to one of
those final three branch instructions depending upon which kind of
exception the memory access took. In this way, the fault handler
doesn't have to know if it was a spill or a fill that it's handling
the fault for. It just always branches to the last instruction in
the parent trap's handler.
All window trap handlers are 0x80 aligned, so if we "or" 0x7c into the
trap time program counter, we'll get that final instruction in the
trap handler.
On return from trap, we have to pull the register window in but we do
this by hand instead of just executing a "restore" instruction for
several reasons. The largest being that from Niagara and onward we
simply don't have enough levels in the trap stack to fully resolve all
possible exception cases of a window fault when we are already at
trap level 1 (which we enter to get ready to return from the original
trap).
This is executed inline via the FILL_*_RTRAP handlers. rtrap_64.S's
code branches directly to these to do the window fill by hand if
necessary. Now if you look at them, we'll see at the end:
And oops, all three cases are handled like a fault.
This doesn't work because each of these trap types (data access
exception, memory address unaligned, and faults) store their auxiliary
info in different registers to pass on to the C handler which does the
real work.
So in the case where the stack was unaligned, the unaligned trap
handler sets up the arg registers one way, and then we branched to
the fault handler which expects them setup another way.
So the FAULT_TYPE_* value ends up basically being garbage, and
randomly would generate the backtrace seen above.
David S. Miller [Wed, 25 May 2016 19:51:20 +0000 (12:51 -0700)]
sparc64: Take ctx_alloc_lock properly in hugetlb_setup().
On cheetahplus chips we take the ctx_alloc_lock in order to
modify the TLB lookup parameters for the indexed TLBs, which
are stored in the context register.
This is called with interrupts disabled, however ctx_alloc_lock
is an IRQ safe lock, therefore we must take acquire/release it
properly with spin_{lock,unlock}_irq().
Reported-by: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Allen Pais <allen.pais@oracle.com>
Reported-by: Ilya Malakhov <ilmalakhovthefirst@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Allen Pais <allen.pais@oracle.com>
max_active determines the maximum number of execution contexts per
CPU which can be assigned to the work items of a wq. For example,
with @max_active of 16, at most 16 work items of the wq can be
executing at the same time per CPU.
Currently, for a bound wq, the maximum limit for @max_active is 512
and the default value used when 0 is specified is 256. For an unbound
wq, the limit is higher of 512 and 4 * num_possible_cpus(). These
values are chosen sufficiently high such that they are not the
limiting factor while providing protection in runaway cases.
The number of active work items of a wq is usually regulated by the
users of the wq, more specifically, by how many work items the users
may queue at the same time. Unless there is a specific need for
throttling the number of active work items, specifying '0' is
recommended.
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Reviewed-by: Liam Merwick <Liam.Merwick@oracle.com> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
(cherry picked from commit b584786e611e8e8a28830386e8b3db8874d794c5)
(cherry picked from commit f2559a96b70562267f01d5bb62ef44aa9f0c0cd8) Signed-off-by: Allen Pais <allen.pais@oracle.com>
Nitin Gupta [Thu, 26 May 2016 21:56:19 +0000 (14:56 -0700)]
sparc64: Reduce TLB flushes during hugepte changes
During hugepage map/unmap, TSB and TLB flushes are currently
issued at every PAGE_SIZE'd boundary which is unnecessary.
We now issue the flush at REAL_HPAGE_SIZE boundaries only.
Without this patch workloads which unmap a large hugepage
backed VMA region get CPU lockups due to excessive TLB
flush calls.
Dwight Engen [Fri, 16 Jan 2015 22:19:39 +0000 (17:19 -0500)]
sunvdc: don't dereference port->disk before disk probe finishes
If the backing file for a vdisk is not present in the service domain an
ldc reset can occur during the initial port/disk probing. The ldc reset
logic was dereferencing port->disk, which may not have been setup yet.
Guard against this case.
chris hyser [Tue, 17 May 2016 20:05:35 +0000 (13:05 -0700)]
sparc64: This patch adds PRIQ support.
This patch supports INT_A through INT_D interrupts as described
by the Open Firmware device tree as well as MSI vectors registered
by PCIe drivers. pci=nomsi may not work though frankly that makes no
sense on a SPARC machine.
The command line parameter priq=off reverts to prior MSIEQ interrupt
mechanism.
chris hyser [Thu, 19 May 2016 20:05:47 +0000 (13:05 -0700)]
sparc64: Enable aggressive setting of PCIe MPS settings
This patch connects SPARC PCIe into the generic PCIe framework enabling
MPS and MRRS to be set aggressively subject to the standard command line
flags. To enable put "pci=pcie_bus_perf" on command line.
chris hyser [Tue, 17 May 2016 16:39:25 +0000 (09:39 -0700)]
sparc64: Allow redirection of MSI/MSI-X IRQs
Allows redirection of MSI/MSI-X IRQs by finding appropriate MSIEQ and
re-routing its IRQ. Also handles driver IRQs sharing the same MSIEQ.
Affinity masks for all such shared interrupts as well as MSIQ IRQ
are modified. Note, based on the HW sharing this patch can change
related driver IRQs in an invisible manner. While confusing and not
desirable, this is an artifact of the HW design.
Rob Gardner [Tue, 9 Feb 2016 22:38:05 +0000 (15:38 -0700)]
IPMI: Driver for Sparc T4/T5/T7 Platforms
Functional IPMI interface driver for Sparc T4/T5/T7. This will
probably also work for other platforms that use an iLOM channel
for IPMI services, including older and future ones, though these
have not been tested.
This driver provides the transport between the IPMI message layer
and the Sparc platform IPMI endpoint in iLOM. The Virtual Logical
Domain Channel (VLDC) driver claims the host endpoint, and we call
it to move data to/from iLOM. So there is an unusual dependency
on another loadable module which requires several compromises
until we work out a plan to restructure the VLDC driver to provide
a cleaner interface:
* An artificial symbolic dependency on vldc is created so that
"modprobe ipmi_si" will ensure that vldc is loaded also.
* ipmi_vldc uses filp_open/kernel_read/kernel_write on device
files provided by vldc, ie, /sys/class/vldc/ipmi/mode and
/dev/vldc/ipmi.
Bug 22804422 has been created to deal with these issues.
Sending this driver upstream is on hold until we work out these
issues. Also, the vldc driver itself has not yet been sent upstream
and that is obviously a prerequisite.
Commit: 5075a47f3765e778b45367ba4873c1bd08b21d0e
fix-up code base for v4.1.12-46 merge
should not have removed "#include <linux/hugetlb.h>"
Add it back in after applying adfc71b605:
fix-up - add back include of linux/dtrace_os.h
so that it will merge with master.
Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com>
Commit: bd52d0fd57c96146f8d1838588753ab9dabcd2fe:
sparc64: Log warning for invalid hugepages boot param
removes "#include <linux/dtrace_os.h>" from arch/sparc/mm/fault_64.c.
That header file is needed by dtrace. Add it back in.
Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com>
Aaron Young [Tue, 1 Mar 2016 15:47:02 +0000 (07:47 -0800)]
SPARC64: UEK4 LDOMS DOMAIN SERVICES UPDATE 3
This update provides the following fix for LDom domain services on UEK4.
1. Add an event to the vlds driver which is used to signal
process(es) using libds that the vlds /dev devices have been updated.
When it receives this event, libds will refresh/update it's internal
list of vlds devices allowing the list to stay immediately up-to-date
when vlds devices have changed. This event fixes some DR related libds
problems found during regression testing due to libds internal vlds
device list becoming stale.
Signed-off-by: Aaron Young <aaron.young@oracle.com> Reviewed-by: Alexandre Chartre <Alexandre.Chartre@oracle.com>
Orabug: 22853109
Alexandre Chartre [Thu, 17 Mar 2016 10:31:24 +0000 (03:31 -0700)]
Interface to mark SR-IOV device ready for use by LDoms guest
Add a iov_ready file to all PCI devices (/sys/bus/pci/devices/*/iov_ready).
The iov_ready file is write only, and mapped to the pci_iov_dev_ready
hypervisor call, which is used to indicate that a PCI device is ready
or no longer ready to be shared with other domains
Write "1" to the file to indicate that the PCI device is ready.
For example:
Vijay Kumar [Wed, 9 Mar 2016 19:48:38 +0000 (11:48 -0800)]
sparc64: Log warning for invalid hugepages boot param
When an invalid hugepage param is mentioned in kernel boot param,
appropriate warning should be logged to indicate if it's not
a) software supported
b) MMU support for xl_hugepagesz
c) xl_hugepagesz not in use
Signed-off-by: Bob Picco <bob.picco@oracle.com> Signed-off-by: Vijay Kumar <vijay.ac.kumar@oracle.com> Acked-by: Nitin Gupta <nitin.m.gupta@oracle.com>
Orabug: 22729791 Signed-off-by: Allen Pais <allen.pais@oracle.com>
Note: Resending this patch. There is no change in this patch since v1.
Jalap?no was verified repaired.
Now to find performance issues.
One performance issue is subordinate page table state (SPTS). The SPTS will
be tricky because of protection changes for COW and other. For example,
a 2Gb hugepage will have 1UL << (31-23) PMD entries. Do we want 256 IPI-s
for a hugepage TTE(pte) change?
chris hyser [Fri, 1 Apr 2016 19:44:22 +0000 (12:44 -0700)]
sparc64: Fix I/O NUMA parsing and sysfs display code.
I/O NUMA node parsing has been broke since T5 and did not work on
T7. The code also did not correctly handle PCIe root complexes
crossbar connected to multiple memory/cpu NUMA nodes. Additionally,
the numa_node attributes displayed in sysfs were incorrect.
Example: T7-4 showing round-robin spread of multiply connected root
complexes.
[ 3723.288247] /pci@305: On NUMA node 0
[ 3723.363398] /pci@304: On NUMA node 2
[ 3723.437486] /pci@307: On NUMA node 0
[ 3723.510510] /pci@306: On NUMA node 2
[ 3723.582582] /pci@313: On NUMA node 0
[ 3723.655276] /pci@308: On NUMA node 2
[ 3723.728077] /pci@302: On NUMA node 0
[ 3723.800774] /pci@30a: On NUMA node 2
[ 3723.874895] /pci@309: On NUMA node 0
[ 3723.947089] /pci@301: On NUMA node 2
[ 3724.020218] /pci@30b: On NUMA node 1
[ 3724.092902] /pci@300: On NUMA node 3
[ 3724.167630] /pci@303: On NUMA node 1
[ 3724.240287] /pci@30c: On NUMA node 3
[ 3724.312245] /pci@312: On NUMA node 1
[ 3724.384857] /pci@30e: On NUMA node 3
[ 3724.457482] /pci@30d: On NUMA node 1
[ 3724.531679] /pci@310: On NUMA node 3
[ 3724.603621] /pci@30f: On NUMA node 1
[ 3724.675695] /pci@311: On NUMA node 3
chris hyser [Thu, 7 Apr 2016 20:55:56 +0000 (13:55 -0700)]
sparc64: Set up core sibling list correctly for T7.
The important definition of core sibling is that some level of cache is shared.
The prior SPARC notion of socket was defined as highest level of shared cache.
On T7 platforms, the MD record now describes the CPUs that share the physical
socket and this is no longer tied to shared cache. This patch correctly
separates these two concepts.
chris hyser [Thu, 7 Apr 2016 19:12:05 +0000 (12:12 -0700)]
sparc64: Fix CPU package information in /sys
CPU package information in
/sys/bus/cpu/devices/cpu*/topology/physical_package_id
is inconisistent with the use by tools such as irqbalance. This patch
uses the socket ID to be consistent and useful.
chris hyser [Thu, 7 Apr 2016 19:32:48 +0000 (12:32 -0700)]
sparc64: Add 3rd level cache info to /sys
This patch pulls line size and cache size info from the machine description and
adds l3 caches files to /sys/bus/cpu/devices/cpu* directories. It also
structures the information in the same directory hierachy as x86 so that user
programs like irqbalance can find the needed information to work correctly.
Rob Gardner [Sun, 27 Mar 2016 22:39:13 +0000 (16:39 -0600)]
sparc64: Add lightweight syscall mechanism for lwp_info
This patch introduces a new "light weight" system call
mechanism which has the ability to retrieve small bits
of information and/or perform minor computations without
the need for a full blown save/switch/restore context.
Solaris provides _lwp_info(), which returns basically the
same information as getrusage(RUSAGE_THREAD) but much faster.
This is used extensively by the database code, and returns
the utime and stime for the calling thread.
(This patch also provides a fast getcpu function just as
a demonstration of how additional calls might be added.
Unlike x86, there is no unprivileged instruction to do this,
and so it is a fairly expensive system call.)
Allen Pais [Tue, 29 Mar 2016 08:50:33 +0000 (14:20 +0530)]
sparc64:piggback program generates a.out header with incorrect section sizes
piggyback in uek for SPARC generates an a.out that has section sizes that are
too large. This causes problems when booting with OpenBoot because OpenBoot
uses those sizes to map and copy the image to its specified VA and runs into
unmapped memory during the copies.
Signed-off-by: Jose Marchesi <jose.marchesi@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com>
(cherry picked from commit bd99ee7ceffb1a472ccd8841dd7011d15e7fa258)
wim.coekaerts@oracle.com [Fri, 29 Jan 2016 17:39:38 +0000 (09:39 -0800)]
Add sun4v_wdt watchdog driver
This driver adds sparc hypervisor watchdog support. The default
timeout is 60 seconds and the range is between 1 and 31536000 seconds. Both watchdog-resolution and
watchdog-max-timeout MD properties settings are supported.
Signed-off-by: Wim Coekaerts <wim.coekaerts@oracle.com> Reviewed-by: Julian Calaby <julian.calaby@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Allen Pais <allen.pais@oracle.com>
(cherry picked from commit eccc96426978c0fa963f8712077ecb6247f0e57e)
SR-IOV code looks for arch specific data while enabling
VFs. When VF device is added, driver probe function makes set
of calls to initialize the pci device. Because the VF device is
added different way than the normal PF device(which happens via
of_create_pci_dev for sparc), some of the arch specific initialization
does not happen for VF device. That causes panic when archdata is
accessed.
To fix this, I have used already defined weak function
pcibios_setup_device to copy archdata from PF to VF.
Also verified the fix.
Signed-off-by: Babu Moger <babu.moger@oracle.com> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com>
(cherry picked from commit be81c7e3cc48d3ff8b26021be3fd49e997743cbc)
chris hyser [Thu, 4 Feb 2016 21:14:43 +0000 (13:14 -0800)]
sparc64: enable "relaxed ordering" in IOMMU mappings
Enable relaxed ordering for memory writes in IOMMU TSB entry from
dma_4v_map_page() and dma_4v_map_sg() when dma_attrs
DMA_ATTR_WEAK_ORDERING is set. This requires vPCI version 2.0 API.
chris hyser [Thu, 4 Feb 2016 20:07:03 +0000 (12:07 -0800)]
sparc64: Enable PCI IOMMU version 2 API
Enable Version 2 of the PCI IOMMU API needed for advanced features
such as PCI Relaxed Ordering and greater than 2 GB DMA address
space per root complex.
Sowmini Varadhan [Tue, 2 Feb 2016 18:41:56 +0000 (10:41 -0800)]
sunvnet: perf tracepoint invocations to trace LDC state machine
Use sunvnet perf trace macros to monitor LDC message exchange state.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 5fa4282fdb6d30937abcf1b1a9d367aaf472178a)
Sowmini Varadhan [Tue, 2 Feb 2016 18:41:55 +0000 (10:41 -0800)]
sunvnet: Add support for perf LDC event tracing
Add perf event macros for support of tracing and instrumentation
of LDC state machine
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 61cf74d322a9d8ef172251e32c3008cf60964b70)
- Disable cpu timer only for hot-remove and not for hot-add
- Update interrupt affinities before interrupt redistribution
- Default to simple round-robin interrupt redistribution for ldoms
Tushar Dave [Thu, 7 Jan 2016 23:24:26 +0000 (15:24 -0800)]
sparc64: bypass iommu to use 64bit address space
This patch is internal only not for UPSTREAM. This is a temporary
workaround based on UEK2 commit c1a12ed1d125
("sparc64: enable iommu bypass workaround for IB. This is temporary.")
Current design of sparc iommu is based on iommu V1 APIs which at max
can have 2G/8K DMA addresses. Due to this, kernel entity (e.g. i40e,
PSIF) requesting more than 2G/8K DMA addresses does not work at all.
This patch adds temporary workaround to remedy this issue by bypassing
iommu.
When 64bit iommu implementation is complete, this workaround will be
reverted.
Dave Kleikamp [Thu, 4 Feb 2016 16:43:48 +0000 (10:43 -0600)]
sparc64: call crash_kexec() directly from die_if_kernel()
A direct call to crash_kexec() here allows the crashing register state
to be saved to the PT_NOTE. When called from panic(), a new register
state is created which is less useful.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Occasionally, the crash kernel will fail to configure a virtual disk
because the hypervisor leaves an old request in the rx queue even after
it is reconfigured in ldc_bind(). Fix this with a call to ldc_rx_reset().
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Dave Kleikamp [Fri, 20 Mar 2015 21:38:42 +0000 (16:38 -0500)]
sparc64: restore prom_cif_stack
Commit ef3e035c stopped using the firmware stack and thus stopped saving
it's location in p1275buf. However, kexec wants to be using the firmware
stack when launching the new kernel.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
If sparc_perf_event_update() is called between performcnce counter
overflow interrupts then everything is fine and the total event
count calculation is correct. If however, the
sparc_perf_event_update() is only called when the performance counter
overflows, we do not take the counter wrap into consideration.
This leaves us with an incorrect value for the total event count.
This patch fixes this issue by taking the counter overflow situation
into consideration.
Signed-off-by: Dave Aldridge <david.j.aldridge@oracle.com>
(cherry picked from commit 6c89361408f964ad2c2c29200987aece3a7c222d) Signed-off-by: Allen Pais <allen.pais@oracle.com>
Dave Aldridge [Thu, 21 Jan 2016 14:17:11 +0000 (06:17 -0800)]
sparc64: Fix for perf event counts sometimes reported as negative numbers
Use an unsigned number to prevent sign extension in the calculation
to work out the difference between the previous and the current
count obtained from the perfomance instrumentation counters.
Currently, NUMA node distance matrix is initialized only
when a machine descriptor (MD) exists. However, sun4u
machines (e.g. Sun Blade 2500) do not have an MD and thus
distance values were left uninitialized. The initialization
is now moved such that it happens on both sun4u and sun4v.
Signed-off-by: Nitin Gupta <nitin.m.gupta@oracle.com> Tested-by: Mikael Pettersson <mikpelinux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 36beca6571c941b28b0798667608239731f9bc3a) Signed-off-by: Allen Pais <allen.pais@oracle.com>
Dmitry V. Levin [Sat, 26 Dec 2015 23:13:27 +0000 (02:13 +0300)]
sparc64: fix incorrect sign extension in sys_sparc64_personality
The value returned by sys_personality has type "long int".
It is saved to a variable of type "int", which is not a problem
yet because the type of task_struct->pesonality is "unsigned int".
The problem is the sign extension from "int" to "long int"
that happens on return from sys_sparc64_personality.
For example, a userspace call personality((unsigned) -EINVAL) will
result to any subsequent personality call, including absolutely
harmless read-only personality(0xffffffff) call, failing with
errno set to EINVAL.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Cc: <stable@vger.kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 525fd5a94e1be0776fa652df5c687697db508c91) Signed-off-by: Allen Pais <allen.pais@oracle.com>
projects / users / jedix / linux-maple.git / log