Olof Johansson [Thu, 24 Jun 2021 02:04:14 +0000 (19:04 -0700)]
Merge tag 'v5.14-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Basic support for the new rk3568 soc.
* tag 'v5.14-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: add basic dts for RK3568 EVB
arm64: dts: rockchip: add core dtsi for RK3568 SoC
arm64: dts: rockchip: add generic pinconfig settings used by most Rockchip socs
Olof Johansson [Thu, 24 Jun 2021 02:02:33 +0000 (19:02 -0700)]
Merge tag 'v5.14-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Nodes for the Hantro-based video codecs on
rk3036, rk3066, rk3188 and rk322x.
* tag 'v5.14-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: add vpu and vdec node for RK322x
ARM: dts: rockchip: add vpu nodes for RK3066 and RK3188
ARM: dts: rockchip: add vpu node for RK3036
Olof Johansson [Thu, 24 Jun 2021 02:01:39 +0000 (19:01 -0700)]
Merge tag 'qcom-arm64-for-5.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Additional Qualcomm ARM64 DT updates for v5.14
After a series of refactorings and additions to the SM8150 and SM8250
platform definitions, this adds new devicetree definitions for Sony
Xperia 1, 5, 1II and 5II.
It defines the Qualcomm SA8155p automotive platform as a derrivative of
SM8150 and introduces the Automotive Deveopment Platform board.
Lastly ipq8074 gains the definiton of an additiona I2C master and the
SDHCI bus votes for sc7180 are tweaked.
* tag 'qcom-arm64-for-5.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (25 commits)
arm64: dts: ipq8074: Add QUP6 I2C node
arm64: dts: qcom: sc7180: bus votes for eMMC and SD card
arm64: dts: qcom: sm8250-edo: Add Samsung touchscreen
arm64: dts: qcom: sm8250-edo: Enable GPI DMA
arm64: dts: qcom: sm8250-edo: Enable ADSP/CDSP/SLPI
arm64: dts: qcom: sm8250-edo: Enable PCIe
arm64: dts: qcom: sm8250: Commonize PCIe pins
arm64: dts: qcom: sm8250-edo: Add hardware keys
arm64: dts: qcom: sa8155p-adp: Add base dts file
arm64: dts: qcom: pmm8155au_2: Add base dts file
arm64: dts: qcom: pmm8155au_1: Add base dts file
arm64: dts: qcom: sm8250-edo: Fix up double "pinctrl-1"
arm64: dts: qcom: sm8[12]50-pm8150: Move RESIN to pm8150 dtsi
arm64: dts: qcom: sm8250: Add support for SONY Xperia 1 II / 5 II (Edo platform)
arm64: dts: qcom: sm8250: Move gpio.h inclusion to SoC DTSI
arm64: dts: qcom: sm8250: Add SDHCI2 sleep mode pinctrl
arm64: dts: qcom: sm8150: Add support for SONY Xperia 1 / 5 (Kumano platform)
arm64: dts: qcom: sm8150: Disable Adreno and modem by default
arm64: dts: qcom: sm8250: Disable Adreno and Venus by default
arm64: dts: qcom: sm8250: Add GPI DMA nodes
...
Olof Johansson [Thu, 24 Jun 2021 02:00:04 +0000 (19:00 -0700)]
Merge tag 'v5.14-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
A lot of dt-yaml related fixes; PCIe, USB and pwm-fans for Helios64;
Display rotation and audio codec for the Odroid Go Advance;
IR, spdif and usb-c support for rk3399-firefly;
USB support for rk3308 and some rk3328 boards and setting
the PCIe link speed to actually only supported speed on rk3399.
* tag 'v5.14-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (30 commits)
arm64: dts: rockchip: Re-add regulator-always-on for vcc_sdio for rk3399-roc-pc
arm64: dts: rockchip: Re-add regulator-boot-on, regulator-always-on for vdd_gpu on rk3399-roc-pc
arm64: dts: rockchip: add ir-receiver for rk3399-roc-pc
arm64: dts: rockchip: Add USB-C port details for rk3399 Firefly
arm64: dts: rockchip: Sort rk3399 firefly pinmux entries
arm64: dts: rockchip: add infrared receiver node to RK3399 Firefly
arm64: dts: rockchip: add SPDIF node for rk3399-firefly
arm64: dts: rockchip: Add Rotation Property for OGA Panel
arm64: dts: rockchip: Add support for USB on helios64
arm64: dts: rockchip: add USB support to rk3308.dtsi
arm64: dts: rockchip: rename nodename for phy-rockchip-inno-usb2
arm64: dts: rockchip: add rk817 codec to Odroid Go
arm64: dts: rename grf-gpio nodename in rk3328.dtsi
arm64: dts: rockchip: Add support for PCIe on helios64
arm64: dts: rockchip: Add support for two PWM fans on helios64
arm64: dts: rockchip: fix regulator-gpio states array
arm64: dts: rockchip: add #power-domain-cells to power domain nodes
arm64: dts: rockchip: Fix power-controller node names for rk3399
arm64: dts: rockchip: Fix power-controller node names for rk3328
arm64: dts: rockchip: Fix power-controller node names for px30
...
Olof Johansson [Thu, 24 Jun 2021 01:58:56 +0000 (18:58 -0700)]
Merge tag 'v5.14-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
A lot of fixes related to the dt-binding yaml conversion,
power-domain additions for rk322x and rk3036 and the missing
mmc aliases move to board files on rk3066/rk3188.
* tag 'v5.14-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: add power controller for RK322x
ARM: dts: rockchip: add power controller for RK3036
ARM: dts: rockchip: add labels to the timer nodes on rk3066a
ARM: dts: rockchip: fix supply properties in io-domains nodes
ARM: dts: rockchip: remove #phy-cells from usbphy node rk3066/rk3188
ARM: dts: rockchip: rename nodename for phy-rockchip-inno-usb2
ARM: dts: rockchip: move mmc aliases to board dts on rk3066/rk3188
ARM: dts: rockchip: move and restyle grf nodes rk3066/rk3188
ARM: dts: rockchip: rename vcc_stdby node name for rk3066a-rayeager.dts
ARM: dts: rockchip: Remove more clock-names from PWM nodes
ARM: dts: rockchip: add #power-domain-cells to power domain nodes
ARM: dts: rockchip: Fix power-controller node names for rk3288
ARM: dts: rockchip: Fix power-controller node names for rk3188
ARM: dts: rockchip: Fix power-controller node names for rk3066a
ARM: dts: rockchip: Remove useless interrupt-names on IOMMU node on rk3036
ARM: dts: rockchip: Fix IOMMU nodes properties on rk322x
ARM: dts: rockchip: Fix the timer clocks order
ARM: dts: rockchip: fix pinctrl sleep nodename for rk3036-kylin and rk3288
ARM: dts: rockchip: Fix thermal sensor cells o rk322x
Olof Johansson [Thu, 24 Jun 2021 01:49:10 +0000 (18:49 -0700)]
Merge tag 'ti-k3-dt-for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/dt
Devicetree changes for TI K3 platforms for v5.14 merge window:
* New features:
- AM64 gains PCIe and USB3 for am64-sk board, R5 remote proc (includes
AM64 rproc bindings tag from Bjorn's tree)
- AM65, J721e gains ICSSG MDIO nodes
- AM65: UHS mode speed enabled on am65
* Fixes:
- Fixups on AM64 SRAM model thanks to a ROM bug for USB DFU mode
- Schema related cleanups across j7*, am65, 64
- Few misc Fixups on AM64 where MAC address could conflict; j7200 for
USB2 Rx sensitivity etc.
* tag 'ti-k3-dt-for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux: (37 commits)
arm64: dts: ti: k3-am642-evm/sk: Add DDR carveout memory nodes for R5Fs
arm64: dts: ti: k3-am642-evm/sk: Add mailboxes to R5Fs
arm64: dts: ti: k3-am64-main: Add MAIN domain R5F cluster nodes
arm64: dts: ti: k3-am64-main: Update TF-A load address to workaround USB DFU limitation
arm64: dts: ti: k3-am64-main: Reserve OCMRAM for DMSC-lite and secure proxy communication
arm64: dts: ti: k3-am64-main: Update TF-A's maximum size and node name
arm64: dts: ti: Drop reg-io-width/reg-shift from UART nodes
arm64: dts: ti: k3-am642-evm: align ti,pindir-d0-out-d1-in property with dt-shema
arm64: dts: ti: am65: align ti,pindir-d0-out-d1-in property with dt-shema
arm64: dts: ti: k3-am642-main: fix ports mac properties
arm64: dts: ti: iot2050: Configure r5f cluster on basic variant in split mode
arm64: dts: ti: k3-am642-sk: Disable PCIe
arm64: dts: ti: k3-am642-sk: Enable USB Super-Speed HOST port
arm64: dts: ti: k3-am642-evm: Enable PCIe and SERDES
arm64: dts: ti: k3-am64-main: Add PCIe DT node
arm64: dts: ti: k3-am64-main: Add SERDES DT node
arm64: dts: ti: k3-j721e-common-proc-board: Re-name "link" name as "phy"
arm64: dts: ti: k3-j721e-common-proc-board: Use external clock for SERDES
arm64: dts: ti: k3-j721e-main: Add #clock-cells property to serdes DT node
arm64: dts: ti: k3-j721e-main: Fix external refclk input to SERDES
...
Olof Johansson [Thu, 24 Jun 2021 01:46:19 +0000 (18:46 -0700)]
Merge tag 'omap-for-v5.14/dt-cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree binding clean-up for omaps for v5.14
Minor devicetree clean-up for omaps for the binding checks:
- Drop unsupported dmas for omap2/3 i2c
- Drop redundant ehrpwm compatible
- Drop am33xx-ecap compatible no longer needed
- Correct node names for ecap
- Drop unsupported interrupts for ecap
- Drop redundant ti,pcf8575
- Correct usage for ti,pindir-d0-out-d1-in
* tag 'omap-for-v5.14/dt-cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am437x: align ti,pindir-d0-out-d1-in property with dt-shema
ARM: dts: am335x: align ti,pindir-d0-out-d1-in property with dt-shema
ARM: dts: dra7x-evm: Drop "ti,pcf8575"
ARM: dts: am33xx: Drop interrupt property from ecap nodes
ARM: dts: ti: Fix node name for all ecap dt nodes
ARM: dts: ti: Drop usage of ti,am33xx-ecap from DT nodes
ARM: dts: ti: drop usage of redundant compatible
ARM: dts: omap2/3: Drop dmas property from I2C node
Liang Chen [Tue, 22 Jun 2021 02:05:16 +0000 (10:05 +0800)]
arm64: dts: rockchip: add core dtsi for RK3568 SoC
RK3568 is a high-performance and low power quad-core application processor
designed for personal mobile internet device and AIoT equipment. This patch
add basic core dtsi file for it.
We use scmi_clk for cortex-a55 instead of standard ARMCLK, so that
kernel/uboot/rtos can change cpu clk with the same code in ATF, and we will
enalbe a special high-performance PLL when high frequency is required. The
smci_clk code is in ATF, and clkid for cpu is 0, as below:
Liang Chen [Tue, 22 Jun 2021 02:05:15 +0000 (10:05 +0800)]
arm64: dts: rockchip: add generic pinconfig settings used by most Rockchip socs
The pinconfig settings for Rockchip SoCs are pretty similar on all socs,
so move them to a shared dtsi to be included, instead of redefining them
for each soc.
Alex Bee [Sat, 19 Jun 2021 12:13:06 +0000 (14:13 +0200)]
arm64: dts: rockchip: Re-add regulator-always-on for vcc_sdio for rk3399-roc-pc
Re-add the regulator-always-on property for vcc_sdio which supplies sdmmc,
since it gets disabled during reboot now and the bootrom expects it to be
enabled when booting from SD card. This makes rebooting impossible in that
case and requires a hard reset to boot again.
Fixes: 04a0077fdb19 ("arm64: dts: rockchip: Remove always-on properties from regulator nodes on rk3399-roc-pc.") Signed-off-by: Alex Bee <knaerzche@gmail.com> Link: https://lore.kernel.org/r/20210619121306.7740-1-knaerzche@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Alex Bee [Sat, 19 Jun 2021 12:14:46 +0000 (14:14 +0200)]
arm64: dts: rockchip: Re-add regulator-boot-on, regulator-always-on for vdd_gpu on rk3399-roc-pc
This might be a limitation of either the current panfrost driver
devfreq implementation or how the gpu is implemented in RK3399 SoC.
The gpu regulator must never get disabled or the registers get
(randomly?) inaccessable by the driver. (see all other RK3399 boards)
arm64: dts: qcom: sc7180: bus votes for eMMC and SD card
Update peak bandwidth and average bandwidth vote values for eMMC and
SDCard. This patch calculates the new votes as per the comments from
https://lore.kernel.org/patchwork/patch/1399453/#1619566.
Enabling the hardware thankfully comes down to a simple status = "okay".
We assume that the firmware is provided by the Linux distribution, as it's
signed and needs to come from the stock Android.
Konrad Dybcio [Wed, 16 Jun 2021 12:27:03 +0000 (14:27 +0200)]
arm64: dts: qcom: sm8250-edo: Add hardware keys
Volume Down, GAssist (pdx206 only) and camera keys live on PMIC pins,
with the latter kind being broken for now.. Add these and PON-connected
Volume Up & PWR.
Bhupesh Sharma [Thu, 17 Jun 2021 05:45:48 +0000 (11:15 +0530)]
arm64: dts: qcom: sa8155p-adp: Add base dts file
Add base DTS file for SA8155p Automotive Development Platform.
It enables boot to console, adds tlmm reserved range and ufs flash.
It also includes pmic file.
SA8155p-adp board is based on sa8155p Qualcomm Snapdragon SoC.
SA8155p platform is similar to the SM8150, so use this as base
for now.
Two carveout reserved memory nodes each have been added for each of the
R5F remote processor devices within the MAIN domain on the TI AM642 EVM
and SK boards. These nodes are assigned to the respective rproc device
nodes as well. The first region will be used as the DMA pool for the rproc
devices, and the second region will furnish the static carveout regions
for the firmware memory.
An additional reserved memory node is also added to reserve a portion of
the DDR memory to be used for performing inter-processor communication
between all the remote processors running RTOS or baremetal firmwares.
8 MB of memory is reserved for this purpose, and this accounts for all
the vrings and vring buffers between all the possible pairs of remote
processors.
The current carveout addresses and sizes are defined statically for each
rproc device. The R5F processors do not have an MMU, and as such require
the exact memory used by the firmwares to be set-aside. The firmware
images do not require any RSC_CARVEOUT entries in their resource tables
to allocate the memory for firmware memory segments.
NOTE:
1. The R5F1 carveouts are needed only if the R5F cluster is running in
Split (non Single-CPU) mode. The reserved memory nodes can be disabled
later on if there is no use-case defined to use the corresponding
remote processor.
2. The AM64x SoCs do not have any DSPs and one less R5F cluster compared
to J721E SoCs. So, while the carveout memories reserved for the R5F
clusters present on the SoC match to those on J721E, the overall
memory map reserved for firmwares is quite different. The number of
R5F clusters on AM64x SoCs are same as on J7200 SoCs, but the AM64x
SoCs also have an additional M4F core, so the RTOS IPC memory region
is 1 MB higher than on J7200 SoCs.
Suman Anna [Tue, 15 Jun 2021 19:57:17 +0000 (14:57 -0500)]
arm64: dts: ti: k3-am642-evm/sk: Add mailboxes to R5Fs
Add the required 'mboxes' property to all the R5F processors for the
TI AM642 EVM and SK boards. The mailboxes and some shared memory are
required for running the Remote Processor Messaging (RPMsg) stack
between the host processor and each of the R5Fs.
The chosen sub-mailboxes match the values used in the current firmware
images. This can be changed, if needed, as per the system integration
needs after making appropriate changes on the firmware side as well.
Note that any R5F Core1 resources are needed and used only when that
R5F cluster is configured for Split-mode.
Suman Anna [Tue, 15 Jun 2021 19:57:16 +0000 (14:57 -0500)]
arm64: dts: ti: k3-am64-main: Add MAIN domain R5F cluster nodes
The AM64x SoCs have 2 dual-core Arm Cortex-R5F processor (R5FSS)
subsystems/clusters. Both the R5F clusters are present within the
MAIN domain (MAIN_R5FSS0 & MAIN_R5FSS1). Each of these can be
configured at boot time to be either run in a new "Single-CPU" mode
or in an Asymmetric Multi Processing (AMP) fashion in Split-mode.
The mode is restricted to "Single-CPU" on some devices with the
appropriate eFuse bit set, but the most common devices support both
modes. These subsystems have 64 KB each Tightly-Coupled Memory (TCM)
internal memories for each core split between two banks - ATCM and
BTCM (further interleaved into two banks). The TCMs of both Cores
are combined in Single-CPU mode to provide a larger 128 KB of memory.
The other notable difference is that the TCMs are spaced 1 MB apart
on these SoCs unlike the existing SoCs.
Add the DT nodes for both these MAIN domain R5F cluster/subsystems,
the two R5F cores are added as child nodes to each of the corresponding
R5F cluster node. Both the clusters are configured to run in Split mode
by default, with the ATCMs enabled to allow the R5 cores to execute
code from DDR with boot-strapping code from ATCM. The inter-processor
communication between the main A72 cores and these processors is
achieved through shared memory and Mailboxes.
The following firmware names are used by default for these cores, and
can be overridden in a board dts file if desired:
MAIN R5FSS0 Core0: am64-main-r5f0_0-fw (both in Single-CPU & Split modes)
MAIN R5FSS0 Core1: am64-main-r5f0_1-fw (needed only in Split mode)
MAIN R5FSS1 Core0: am64-main-r5f1_0-fw (both in Single-CPU & Split modes)
MAIN R5FSS1 Core1: am64-main-r5f1_1-fw (needed only in Split mode)
NOTE:
A R5FSS cluster can be configured in "Single-CPU" mode by using a
value of 2 for the "ti,cluster-mode" property. Value of 1 is not
permitted (fails the dtbs_check).
* tag '20210327143117.1840-2-s-anna@ti.com' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
dt-bindings: remoteproc: k3-r5f: Update bindings for AM64x SoCs
Marcin Wojtas [Mon, 22 Mar 2021 00:39:15 +0000 (01:39 +0100)]
arm64: dts: ensure backward compatibility of the AP807 Xenon
A recent switch to a dedicated AP807 compatible string for the Xenon
SD/MMC controller result in the driver not being probed when
using updated device tree with the older kernel revisions.
It may also be problematic for other OSs/firmware that use
Linux device tree sources as a reference. Resolve the problem
with backward compatibility by restoring a previous compatible
string as secondary one.
Signed-off-by: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Move the turris-mox-rwtm firmware node from Turris MOX' device tree into
the generic armada-37xx.dtsi file and use the generic compatible string
'marvell,armada-3700-rwtm-firmware' instead of the current one.
Turris MOX DTS file contains also old compatible string for backward
compatibility.
The Turris MOX rWTM firmware can be used on any Armada 37xx device,
giving them access to the rWTM hardware random number generator, which
is otherwise unavailable.
This change allows Linux to load the turris-mox-rwtm.ko module on these
boards.
Tested on ESPRESSObin v5 with both default Marvell WTMI firmware and
CZ.NIC's firmware. With default WTMI firmware the turris-mox-rwtm fails
to probe, while with CZ.NIC's firmware it registers the HW random number
generator.
Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Olof Johansson [Thu, 17 Jun 2021 00:33:11 +0000 (17:33 -0700)]
Merge tag 'amlogic-arm-dt-for-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dt
Amlogic ARM DT changes for v5.14:
- Set the fifo-size of uart_A to 128 bytes like the ARM64 counterpart
* tag 'amlogic-arm-dt-for-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
ARM: dts: meson: Set the fifo-size of uart_A to 128 bytes
Aswath Govindraju [Wed, 16 Jun 2021 17:12:24 +0000 (22:42 +0530)]
arm64: dts: ti: k3-am64-main: Update TF-A load address to workaround USB DFU limitation
Due to a limitation for USB DFU boot mode, SPL load address has to be less
than or equal to 0x70001000. So, load address of SPL and TF-A have been
moved to 0x70000000 and 0x701c0000 respectively, in U-Boot version 2021.10.
Therefore, update TF-A's location in the device tree node.
Aswath Govindraju [Wed, 16 Jun 2021 17:12:23 +0000 (22:42 +0530)]
arm64: dts: ti: k3-am64-main: Reserve OCMRAM for DMSC-lite and secure proxy communication
The final 128KB in SRAM is reserved by default for DMSC-lite code and
secure proxy communication buffer. The memory region used for DMSC-lite
code can be optionally freed up by secure firmware API[1]. However, the
buffer for secure proxy communication is not configurable. This default
hardware configuration is unique for AM64.
Therefore, indicate the area reserved for DMSC-lite code and secure proxy
communication buffer in the oc_sram device tree node.
Aswath Govindraju [Wed, 16 Jun 2021 17:12:22 +0000 (22:42 +0530)]
arm64: dts: ti: k3-am64-main: Update TF-A's maximum size and node name
The maximum size of TF-A 2.5 has been increased to 0x1c000 [1]. In order to
account for future expansions too, increase the allocated size for TF-A to
0x20000, in the device tree node.
Konrad Dybcio [Sun, 13 Jun 2021 12:48:22 +0000 (14:48 +0200)]
arm64: dts: qcom: sm8[12]50-pm8150: Move RESIN to pm8150 dtsi
It's not worth duplicating the same node over and over and over and over again,
so let's keep the common bits in the pm8150 DTSI, making only changing the
status and keycode necessary.
Konrad Dybcio [Wed, 16 Jun 2021 00:23:21 +0000 (02:23 +0200)]
arm64: dts: qcom: sm8250: Add support for SONY Xperia 1 II / 5 II (Edo platform)
Add support for SONY Xperia 1 II and 5 II smartphones (read one/five mark two).
They are based on the Qualcomm SM8250 chipset and both feature 5G modems. There
also exists a third Edo board, namely the Xperia PRO (PDX204), but it's $2500
and no developers have obtained it so far (to my knowledge).
The devices are affected by a scary UFS behaviour where sending a certain UFS
command (which is worked around on downstream) renders the device unbootable,
by effectively erasing the bootloader. Therefore UFS AND UFSPHY are strictly
disabled for now.
Konrad Dybcio [Wed, 16 Jun 2021 00:23:20 +0000 (02:23 +0200)]
arm64: dts: qcom: sm8250: Move gpio.h inclusion to SoC DTSI
Almost any board that boots and has a way to interact with it
(say for the rare cases of just-pstore or let's-rely-on-bootloader-setup)
needs to set some GPIOs, so it makes no sense to include gpio.h separately
each time. Hence move it to SoC DTSI.
Add required pins for SDHCI2, so that the interface can work reliably.
This commit adds sleep_state setup to the SoC DTSI, as it is common for
all boards.
Konrad Dybcio [Fri, 11 Jun 2021 20:33:01 +0000 (22:33 +0200)]
arm64: dts: qcom: sm8150: Add support for SONY Xperia 1 / 5 (Kumano platform)
Add support for SONY Xperia 1 and 5 smartphones, both based on the
Qualcomm SM8150 chipset. There also exist 5G-capable versions of these
devices, but they weren't sold much (if at all) outside Japan.
The devices are affected by a scary UFS behaviour where sending a certain UFS
command (which is worked around on downstream) renders the device unbootable,
by effectively erasing the bootloader. Therefore UFS AND UFSPHY are strictly
disabled for now.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Tested-by: Marijn Suijten <marijn.suijten@somainline.org> (On Bahamut) Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210611203301.101067-2-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Konrad Dybcio [Fri, 11 Jun 2021 20:33:00 +0000 (22:33 +0200)]
arm64: dts: qcom: sm8150: Disable Adreno and modem by default
Components that rely on proprietary (not to mention signed!) firmware should
not be enabled by default, as lack of the aforementioned firmware could cause
various issues, from random errors to straight-up failing to boot.
Not enabling modem back on the HDK, as it uses a sa8150.
Also fixed a sorting mistake in both boards' dt while at it.
Konrad Dybcio [Sat, 12 Jun 2021 19:23:56 +0000 (21:23 +0200)]
arm64: dts: qcom: sm8250: Disable Adreno and Venus by default
Components that rely on proprietary (not to mention signed!) firmware should
not be enabled by default, as lack of the aforementioned firmware could cause
various issues, from random errors to straight-up failing to boot.
Konrad Dybcio [Sun, 13 Jun 2021 11:43:56 +0000 (13:43 +0200)]
arm64: dts: qcom: sm8250: Add size/address-cells to dsi[01]
Add the aforementioned properties in the SoC DTSI so that everybody doesn't
have to copy that into their device DTs, effectively reducing code
duplication.
Olof Johansson [Tue, 15 Jun 2021 15:37:29 +0000 (08:37 -0700)]
Merge tag 'tegra-for-5.14-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v5.14-rc1
Contains changes to consolidate audio card names, adds audio support on
Jetson Xavier NX and enables SMMU on Tegra194.
* tag 'tegra-for-5.14-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Enable SMMU support on Tegra194
arm64: tegra: Hook up memory controller to SMMU on Tegra186
arm64: tegra: Use correct compatible string for Tegra186 SMMU
arm64: tegra: Audio graph sound card for Jetson Xavier NX
arm64: tegra: Consolidate audio card names
arm64: tegra: Add PMU node for Tegra194
Olof Johansson [Tue, 15 Jun 2021 15:36:25 +0000 (08:36 -0700)]
Merge tag 'tegra-for-5.14-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
ARM: tegra: Device tree changes for v5.14-rc1
This contains various improvements (such as microphone detection and
thermal zones) for some older Tegra devices (such as the Nexus 7 or
the Acer A500).
* tag 'tegra-for-5.14-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: ouya: Enable memory frequency thermal throttling using ACTMON
ARM: tegra: nexus7: Enable memory frequency thermal throttling using ACTMON
ARM: tegra: Add cooling cells to ACTMON device-tree node
ARM: tegra: nexus7: Correct 3v3 regulator GPIO of PM269 variant
ARM: tegra: nexus7: Remove monitored-battery property
ARM: tegra: nexus7: Improve thermal zones
ARM: tegra: nexus7: Add i2c-thermtrip node
ARM: tegra: paz00: Add CPU thermal zone
ARM: tegra: wm8903: Fix polarity of headphones-detection GPIO in device-trees
ARM: tegra: Add reg property to Tegra20 EMC table device-tree nodes
ARM: tegra: acer-a500: Bump thermal trips by 10C
ARM: tegra: acer-a500: Specify proper voltage for WiFi SDIO bus
ARM: tegra: acer-a500: Improve microphone detection
Olof Johansson [Tue, 15 Jun 2021 15:33:45 +0000 (08:33 -0700)]
Merge tag 'tegra-for-5.14-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
dt-bindings: Changes for v5.14-rc1
This contains a conversion of the Tegra clock and reset controller
device tree bindings to the new json-schema format and adds the core
power domain to the PMC device tree bindings.
* tag 'tegra-for-5.14-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: soc: tegra-pmc: Document core power domain
dt-bindings: clock: tegra: Convert to schema
Olof Johansson [Tue, 15 Jun 2021 15:18:09 +0000 (08:18 -0700)]
Merge tag 'visconti-arm-dt-for-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti into arm/dt
Visconti device tree updates for 5.14
- Add DT support for Toshiba Visconti5 PWM driver
* tag 'visconti-arm-dt-for-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti:
arm64: dts: visconti: Add PWM support for TMPV7708 SoC
Olof Johansson [Tue, 15 Jun 2021 15:17:30 +0000 (08:17 -0700)]
Merge tag 'qcom-dts-for-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm DTS updates for v5.14
This adds DMA, NAND controllers, USB controller and PHY, RPM, L2CC,
thermal sensors and defines thermal zones. It them enables these for the
RB3011.
* tag 'qcom-dts-for-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: Enable NAND + USB for RB3011
ARM: dts: qcom: add L2CC and RPM for IPQ8064
ARM: dts: qcom: Add USB port definitions to ipq806x
ARM: dts: qcom: Add tsens details to ipq806x
ARM: dts: qcom: Add ADM DMA + NAND definitions to ipq806x
Olof Johansson [Tue, 15 Jun 2021 15:11:54 +0000 (08:11 -0700)]
Merge tag 'imx-dt64-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree chagnes for 5.14:
- New board support: i.MX8MM Gateworks GW7901 board.
- Add SPBA bus description for i.MX8MN and i.MX8MM.
- A series of update on imx8mq-nitrogen board to add USB OTG/Host and
LT8912 MIPI-DSI to HDMI support.
- Correct enet clock description for i.MX8 Connection Subsystem.
- A couple of patches from Heiko Schocher to add FlexSPI device for
i.MX8MP SoC and enable SPI NOR Flash support on imx8mp-phycore-som.
- Remove the reference to audio IPG clock on i.MX8MP.
- Enable EQOS Ethernet and PMIC device support for imx8mp-evk.
- Disable USB over-current on imx8mm-evk and imx8mn-evk.
- Add dma-ranges description for i.MX8MM and i.MX8MN SoC.
- Add PCIe clock description for i.MX8MQ SoC.
- Enable PCIe support on freeway board.
- Enable OPTEE support on ls1028a-rdb board.
* tag 'imx-dt64-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (24 commits)
arm64: dts: imx8mn-evk: disable over current for usb
arm64: dts: imx8mm-evk: disable over current for usb1
arm64: dts: freescale: Separate each group of data in the property 'reg'
arm64: dts: imx8: conn: fix enet clock setting
arm64: dts: imx8mq: assign PCIe clocks
arm64: dts: imx8mn: specify dma-ranges
arm64: dts: imx8mm: specify dma-ranges
arm64: dts: fsl-ls1028a: Correct ECAM PCIE window ranges
arm64: dts: imx8mn-beacon-som: Assign PMIC clock
arm64: dts: ls208xa: remove bus-num from dspi node
arm64: dts: ls1012a: enable PCIe on freeway board
arm64: dts: imx8mp-evk: enable EQOS ethernet
arm64: dts: imx8mp: Remove the reference to audio ipg clock on imx8mp
arm64: dts: imx8mq-evk: add one regulator used to power up pcie phy
arm64: dts: imx8mm: Add spba1 and spba2 buses
arm64: dts: imx8mn: Add spba1 bus
arm64: dts: imx8mq-nitrogen: add lt8912 MIPI-DSI to HDMI
arm64: dts: imx8mq-nitrogen: add USB HOST support
arm64: dts: imx8mq-nitrogen: add USB OTG support
arm64: dts: imx8mp-phycore-som: enable spi nor
...
Olof Johansson [Tue, 15 Jun 2021 15:11:30 +0000 (08:11 -0700)]
Merge tag 'imx-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX device tree changes for 5.14:
- New board support: i.MX6Q DaSheng COM-9XX SBC board, i.MX28 based XEA
board, GE B1x5v2 boards.
- A series from Christoph Niedermaier to correct imx6q-dhcom
descriptions, add device aliases and ethernet VIO regulator.
- Correct Ethernet node name for imx51-digi-connectcore-som and
imx53-ard board to comply DT schema.
- A couple of update on imx6dl-yapp4 board, configuring OLED display
segment offset, and using aliases to set custom MMC device indexes.
- A series from Oleksij Rempel and Robin van der Gracht to update
Protonic boards: imx6dl-prtvt7, imx6dl-plym2m and imx6qdl-vicut1.
- A series from Shengjiu Wang to improve various audio support on NXP
reference boards.
- Rename pinfunc for i.MX25 GPIO_[A-F] pads for consistency.
* tag 'imx-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (30 commits)
ARM: dts: imx6: Add GE B1x5v2
ARM: dts: imx6q-dhcom: Add ethernet VIO regulator
ARM: dts: imx6q-dhcom: Add aliases for i2c, serial and rtc
ARM: dts: imx6q-dhcom: Add gpios pinctrl for i2c bus recovery
ARM: dts: imx6q-dhcom: Fix ethernet plugin detection problems
ARM: dts: imx6q-dhcom: Fix ethernet reset time properties
ARM: dts: imx6dl-prtvt7: Remove unused 'sound-dai-cells' from ssi1 node
ARM: dts: imx6dl-prtvt7: The sgtl5000 uses i2s not ac97
ARM: dts: imx6qdl-vicut1: add interrupt-counter nodes
ARM: dts: imx6dl-prtvt7: Enable the VPU
ARM: dts: imx6dl: enable touchscreen debounce filter on PLYM2M and PRTVT7 boards
ARM: dts: imx6dl-plym2m: remove touchscreen-size-* properties
ARM: dts: imx6dl-prtvt7: fix PWM cell count for the backlight node.
ARM: dts: imx6dl-prtvt7: Remove backlight enable gpio
ARM: dts: imx6dl-prtvt7: add TSC2046 touchscreen node
ARM: dts: imx53-ard: Correct Ethernet node name
ARM: dts: i.MX51: digi-connectcore-som: Correct Ethernet node name
ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE value
ARM: dts: imx6: edmqmx6: set phy-mode to RGMII-ID
ARM: dts: imx6qdl-sabresd: Configure the gpio for hp detect
...
Olof Johansson [Tue, 15 Jun 2021 15:10:12 +0000 (08:10 -0700)]
Merge tag 'imx-bindings-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX dt-bindings update for 5.14:
- Add vendor prefixes for congatec GmbH and DaSheng, Inc.
- Add compatibles for i.MX6Q DaSheng COM-9XX SBC, GE B1x5pv2 and
i.MX8MM GW7901 boards.
- Add an optional 'resets' property for i.MX GPCv2 bindings.
* tag 'imx-bindings-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: add GE B1x5pv2 boards
dt-bindings: vendor-prefixes: add congatec
dt-bindings: imx: gpcv2: add support for optional resets
dt-bindings: arm: imx: Add i.mx6q DaSheng COM-9XX SBC
dt-bindings: add dasheng vendor prefix
dt-bindings: arm: imx: add imx8mm gw7901 support
arm64: dts: qcom: sc7180: Add xo clock for eMMC and Sd card
The calculations for the DLL register values are based on the clock rate
of the reference clock. Provide the reference clock in the definition of
the two SDHCI controllers to not rely on the default values.
Vignesh Raghavendra [Mon, 7 Jun 2021 13:45:58 +0000 (19:15 +0530)]
arm64: dts: ti: Drop reg-io-width/reg-shift from UART nodes
8250_omap compatible UART IPs on all SoCs have registers aligned at 4
byte address boundary and constant byte addressability. Thus there is no
need for reg-io-width or reg-shift DT properties. These properties are
not used by 8250_omap driver nor documented as part of binding document.
Therefore drop them.
This is in preparation to move omap-serial.txt to YAML format.
Grygorii Strashko [Tue, 8 Jun 2021 18:49:40 +0000 (21:49 +0300)]
arm64: dts: ti: k3-am642-main: fix ports mac properties
The current device tree CPSW3g node adds non-zero "mac-address" property to
the ports, which prevents random MAC address assignment to network devices
if bootloader failed to update DT. This may cause more then one host to
have the same MAC in the network.
mac-address = [00 00 de ad be ef];
mac-address = [00 01 de ad be ef];
In addition, there is one MAC address available in eFuse registers which
can be used for default port 1.
Hence, fix ports MAC properties by:
- resetting "mac-address" property to 0
- adding ti,syscon-efuse = <&main_conf 0x200> to Port 1
Martin Blumenstingl [Fri, 4 Jun 2021 17:08:44 +0000 (19:08 +0200)]
ARM: dts: meson: Set the fifo-size of uart_A to 128 bytes
The first UART controller in the "Everything-Else" power domain is
called uart_A. Unlike all other UARTs (which use a 64 byte fifo-size in
hardware) uart_A has a fifo-size of 128 bytes. This UART controller is
typically used for Bluetooth HCI.
The fifo-size of 128 bytes is valid from all SoCs from Meson6 (or
possibly even earlier) all the way up to the latest 64-bit ones.
As described in the Odroid-C4 & Odroid-HC4 schematics, the 5V regulator is controlled
by GPIOH_8 and in Open Drain since this GPIO doesn't support Push-Pull.
Neil Armstrong [Mon, 7 Jun 2021 06:54:30 +0000 (08:54 +0200)]
arm64: dts: meson-sm1-odroid: set tf_io regulator gpio as open source
According to Odroid-C4 & HC4 Schematics, the TF_3V3N_1V8_EN can be in Hi-Z for 3v3,
and since it's the default GPIOAO_6 mode at reset, let switch this GPIO as Open-Source
to drive for 1, and input for 0.
Alex Bee [Thu, 27 May 2021 15:44:51 +0000 (17:44 +0200)]
ARM: dts: rockchip: add power controller for RK3036
Add the power controller node and the correspondending qos nodes for
RK3036.
Also add the power-domain property to the nodes that are already
present.
Note: Since the regiser offsets of the axi interconnect QoS are missing
in the TRM (RK3036 TRM V1.0), they have been taken from vendor kernel.
Johan Jonker [Sat, 12 Jun 2021 18:47:33 +0000 (20:47 +0200)]
ARM: dts: rockchip: add labels to the timer nodes on rk3066a
While the kernel doesn't care so much right now, boot loaders like
u-boot need to refine the node on their side, so to make life easier
for everyone add the labels to the timer nodes on rk3066a.
Olof Johansson [Sat, 12 Jun 2021 15:54:28 +0000 (08:54 -0700)]
Merge tag 'sunxi-dt-for-5.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual bunch of patches to improve the Allwinner SoCs support,
mainly:
- I2S Support for the V3
- Audio Codec Support for the V3s
- DMA support for the V3s
- PWM support for the V3s
- Support for Bluetooth Audio on the pinephone
- Add A10-like timers to the A64 and R40
- New boards: Forlinx OKA40i-C, Forlinx OKA40i-C, NanoPi R1S H5
* tag 'sunxi-dt-for-5.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (29 commits)
ARM: dts: sun8i: v3s: enable emac for zero Dock
arm64: dts: allwinner: pinephone: Set audio card name
ARM: dts: sun8i: r40: Add timer node
ARM: dts: sun8i: V3: add I2S interface to V3 dts
dt-bindings: sound: sun4i-i2s: add Allwinner V3 I2S compatible
ARM: dts: sun8i: V3: add codec analog frontend to V3 dts
ASoC: dt-bindings: sun8i-a23-codec-analog: add compatible for Allwinner V3
ARM: dts: sun8i: v3s: add analog codec and frontend to v3s dts
ARM: dts: sun8i: v3s: add DMA properties to peripherals supporting DMA
ARM: dts: sun8i: v3s: add DMA controller to v3s dts
ARM: dts: sun8i: v3s: add pwm controller to v3s dts
dt-bindings: pwm: allwinner: add v3s pwm compatible
arm64: dts: allwinner: h5: Add NanoPi R1S H5 support
dt-bindings: arm: Add NanoPi R1S H5
arm64: dts: allwinner: pinephone: Add support for Bluetooth audio
arm64: dts: allwinner: a64: Allow multiple DAI links
arm64: dts: allwinner: a64: Add pinmux nodes for AIF2/AIF3
arm64: dts: allwinner: a64: Allow using multiple codec DAIs
ARM: dts: sun8i-a33: Allow using multiple codec DAIs
ASoC: dt-bindings: sun8i-codec: Increase #sound-dai-cells
...
Olof Johansson [Sat, 12 Jun 2021 15:49:10 +0000 (08:49 -0700)]
Merge tag 'at91-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 dt for 5.14:
- A fix for sama5d4 gpio mux
- A trivial fix for DT documentation
* tag 'at91-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
dt-bindings: i2c: at91: fix example for scl-gpios
ARM: dts: at91: sama5d4: fix pinctrl muxing
Olof Johansson [Sat, 12 Jun 2021 15:47:54 +0000 (08:47 -0700)]
Merge tag 'v5.13-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt
mt8173:
- split hardware encoder block into two devices.
mt8167:
- add pm domains, multi-media system (mmsys), SMI, local arbiter
(larb) and IOMMU nodes.
mt8183:
- Add new chromebooks: HP Chromebook 11a, Acer Chromebook 311, HP
Chromebook x360 11MK G3 EE, Lenovo IdeaPad Flex 3.
- add power domain to SMI common node.
- add power supplies for EEPROM node.
projects / users / dwmw2 / linux.git / log