Building lpddr2_nvm with clang can result in a giant stack usage
in one function:
drivers/mtd/lpddr/lpddr2_nvm.c:399:12: error: stack frame size of 1144 bytes in function 'lpddr2_nvm_probe' [-Werror,-Wframe-larger-than=]
The problem is that clang decides to build a copy of the mtd_info
structure on the stack and then do a memcpy() into the actual version. It
shouldn't really do it that way, but it's not strictly a bug either.
As a workaround, use a static const version of the structure to assign
most of the members upfront and then only set the few members that
require runtime knowledge at probe time.
Both of_find_compatible_node() and of_find_node_by_type() will return
a refcounted node on success - thus for the success path the node must
be explicitly released with a of_node_put().
The call to of_find_compatible_node() returns a node pointer with
refcount incremented thus it must be explicitly decremented here
before returning.
Fixes: a489043f4626 ("powerpc/pseries: Implement arch_get_random_long() based on H_RANDOM") Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1530522496-14816-1-git-send-email-hofrat@osadl.org Signed-off-by: Sasha Levin <sashal@kernel.org>
The mlx4 driver will proxy MAD packets through the PF driver. A VM or an
instantiated VF will send its MAD packets to the PF driver using
loop-back. The PF driver will be informed by an interrupt, but defer the
handling and polling of CQEs to a worker thread running on an ordered
work-queue.
Consider the following scenario: the VMs will in short proximity in time,
for example due to a network event, send many MAD packets to the PF
driver. Lets say there are K VMs, each sending N packets.
The interrupt from the first VM will start the worker thread, which will
poll N CQEs. A common case here is where the PF driver will multiplex the
packets received from the VMs out on the wire QP.
But before the wire QP has returned a send CQE and associated interrupt,
the other K - 1 VMs have sent their N packets as well.
The PF driver has to multiplex K * N packets out on the wire QP. But the
send-queue on the wire QP has a finite capacity.
So, in this scenario, if K * N is larger than the send-queue capacity of
the wire QP, we will get MAD packets dropped on the floor with this
dynamic debug message:
mlx4_ib_multiplex_mad: failed sending GSI to wire on behalf of slave 2 (-11)
and this despite the fact that the wire send-queue could have capacity,
but the PF driver isn't aware, because the wire send CQEs have not yet
been polled.
We can also have a similar scenario inbound, with a wire recv-queue larger
than the tunnel QP's send-queue. If many remote peers send MAD packets to
the very same VM, the tunnel send-queue destined to the VM could allegedly
be construed to be full by the PF driver.
This starvation is fixed by introducing separate work queues for the wire
QPs vs. the tunnel QPs.
With this fix, using a dual ported HCA, 8 VFs instantiated, we could run
cmtime on each of the 18 interfaces towards a similar configured peer,
each cmtime instance with 800 QPs (all in all 14400 QPs) without a single
CM packet getting lost.
Currently __set_oom_adj loops through all processes in the system to keep
oom_score_adj and oom_score_adj_min in sync between processes sharing
their mm. This is done for any task with more that one mm_users, which
includes processes with multiple threads (sharing mm and signals).
However for such processes the loop is unnecessary because their signal
structure is shared as well.
Android updates oom_score_adj whenever a tasks changes its role
(background/foreground/...) or binds to/unbinds from a service, making it
more/less important. Such operation can happen frequently. We noticed
that updates to oom_score_adj became more expensive and after further
investigation found out that the patch mentioned in "Fixes" introduced a
regression. Using Pixel 4 with a typical Android workload, write time to
oom_score_adj increased from ~3.57us to ~362us. Moreover this regression
linearly depends on the number of multi-threaded processes running on the
system.
Mark the mm with a new MMF_MULTIPROCESS flag bit when task is created with
(CLONE_VM && !CLONE_THREAD && !CLONE_VFORK). Change __set_oom_adj to use
MMF_MULTIPROCESS instead of mm_users to decide whether oom_score_adj
update should be synchronized between multiple processes. To prevent
races between clone() and __set_oom_adj(), when oom_score_adj of the
process being cloned might be modified from userspace, we use
oom_adj_mutex. Its scope is changed to global.
The combination of (CLONE_VM && !CLONE_THREAD) is rarely used except for
the case of vfork(). To prevent performance regressions of vfork(), we
skip taking oom_adj_mutex and setting MMF_MULTIPROCESS when CLONE_VFORK is
specified. Clearing the MMF_MULTIPROCESS flag (when the last process
sharing the mm exits) is left out of this patch to keep it simple and
because it is believed that this threading model is rare. Should there
ever be a need for optimizing that case as well, it can be done by hooking
into the exit path, likely following the mm_update_next_owner pattern.
With the combination of (CLONE_VM && !CLONE_THREAD && !CLONE_VFORK) being
quite rare, the regression is gone after the change is applied.
[surenb@google.com: v3] Link: https://lkml.kernel.org/r/20200902012558.2335613-1-surenb@google.com Fixes: 44a70adec910 ("mm, oom_adj: make sure processes sharing mm have same view of oom_score_adj") Reported-by: Tim Murray <timmurray@google.com> Suggested-by: Michal Hocko <mhocko@kernel.org> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Eugene Syromiatnikov <esyr@redhat.com> Cc: Christian Kellner <christian@kellner.me> Cc: Adrian Reber <areber@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Gladkov <gladkov.alexey@gmail.com> Cc: Michel Lespinasse <walken@google.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Andrei Vagin <avagin@gmail.com> Cc: Bernd Edlinger <bernd.edlinger@hotmail.de> Cc: John Johansen <john.johansen@canonical.com> Cc: Yafang Shao <laoar.shao@gmail.com> Link: https://lkml.kernel.org/r/20200824153036.3201505-1-surenb@google.com Debugged-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The code in mc_handle_swap_pte() checks for non_swap_entry() and returns
NULL before checking is_device_private_entry() so device private pages are
never handled. Fix this by checking for non_swap_entry() after handling
device private swap PTEs.
I assume the memory cgroup accounting would be off somehow when moving
a process to another memory cgroup. Currently, the device private page
is charged like a normal anonymous page when allocated and is uncharged
when the page is freed so I think that path is OK.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ira Weiny <ira.weiny@intel.com> Link: https://lkml.kernel.org/r/20201009215952.2726-1-rcampbell@nvidia.com
xFixes: c733a82874a7 ("mm/memcontrol: support MEMORY_DEVICE_PRIVATE") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
sdio.c:2403:3: warning: Attempt to free released memory
kfree(card->mpa_rx.buf);
^~~~~~~~~~~~~~~~~~~~~~~
When mwifiex_init_sdio() fails in its first call to
mwifiex_alloc_sdio_mpa_buffer, it falls back to calling it
again. If the second alloc of mpa_tx.buf fails, the error
handler will try to free the old, previously freed mpa_rx.buf.
Reviewing the code, it looks like a second double free would
happen with mwifiex_cleanup_sdio().
So set both pointers to NULL when they are freed.
Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201004131931.29782-1-trix@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The be_fill_queue() function can only fail when "eq_vaddress" is NULL and
since it's non-NULL here that means the function call can't fail. But
imagine if it could, then in that situation we would want to store the
"paddr" so that dma memory can be released.
Link: https://lore.kernel.org/r/20200928091300.GD377727@mwanda Fixes: bfead3b2cb46 ("[SCSI] be2iscsi: Adding msix and mcc_rings V3") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In DDMA mode if INTR OUT transfers mps not multiple of 4 then single packet
corresponds to single descriptor.
Descriptor limit set to mps and desc chain limit set to mps *
MAX_DMA_DESC_NUM_GENERIC. On that descriptors complete, to calculate
transfer size should be considered correction value for each descriptor.
In start request function, if "continue" is true then dma buffer address
should be incremmented by offset for all type of transfers, not only for
Control DATA_OUT transfers.
Fixes: cf77b5fb9b394 ("usb: dwc2: gadget: Transfer length limit checking for DDMA") Fixes: e02f9aa6119e0 ("usb: dwc2: gadget: EP 0 specific DDMA programming") Fixes: aa3e8bc81311e ("usb: dwc2: gadget: DDMA transfer start and complete") Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When dumping wiphy information, we try to split the data into
many submessages, but for old userspace we still support the
old mode where this doesn't happen.
However, in this case we were not resetting our state correctly
and dumping multiple messages for each wiphy, which would have
broken such older userspace.
This was broken pretty much immediately afterwards because it
only worked in the original commit where non-split dumps didn't
have any more data than split dumps...
The u_ether driver has a qmult setting that multiplies the
transmit queue length (which by default is 2).
The intent is that it should be enabled at high/super speed, but
because the code does not explicitly check for USB_SUPER_PLUS,
it is disabled at that speed.
Fix this by ensuring that the queue multiplier is enabled for any
wired link at high speed or above. Using >= for USB_SPEED_*
constants seems correct because it is what the gadget_is_xxxspeed
functions do.
The queue multiplier substantially helps performance at higher
speeds. On a direct SuperSpeed Plus link to a Linux laptop,
iperf3 single TCP stream:
Before (qmult=1): 1.3 Gbps
After (qmult=5): 3.2 Gbps
Fixes: 04617db7aa68 ("usb: gadget: add SS descriptors to Ethernet gadget") Reviewed-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, SuperSpeed NCM gadgets report a speed of 851 Mbps
in USB_CDC_NOTIFY_SPEED_CHANGE. But the calculation appears to
assume 16 packets per microframe, and USB 3 and above no longer
use microframes.
Maximum speed is actually much higher. On a direct connection,
theoretical throughput is at most 3.86 Gbps for gen1x1 and
9.36 Gbps for gen2x1, and I have seen gadget->host iperf
throughput of >2 Gbps for gen1x1 and >4 Gbps for gen2x1.
Unfortunately the ConnectionSpeedChange defined in the CDC spec
only uses 32-bit values, so we can't report accurate numbers for
10Gbps and above. So, report 3.75Gbps for SuperSpeed (which is
roughly maximum theoretical performance) and 4.25Gbps for
SuperSpeed Plus (which is close to the maximum that we can report
in a 32-bit unsigned integer).
Chasing the callers of enic_dev_wait() revealed the gems of enic_reset()
and enic_tx_hang_reset() which are both invoked through work queues in
order to be able to call rtnl_lock(). So far so good.
After locking rtnl both functions acquire enic::enic_api_lock which
serializes against the (ab)use from infiniband. This is where the
trainwreck starts.
enic::enic_api_lock is a spin_lock() which implicitly disables preemption,
but both functions invoke a ton of functions under that lock which can
sleep. The BUG_ON(in_interrupt()) does not trigger in that case because it
can't detect the preempt disabled condition.
This clearly has never been tested with any of the mandatory debug options
for 7+ years, which would have caught that for sure.
Cure it by adding a enic_api_busy member to struct enic, which is modified
and evaluated with enic::enic_api_lock held.
If enic_api_devcmd_proxy_by_index() observes enic::enic_api_busy as true,
it drops enic::enic_api_lock and busy waits for enic::enic_api_busy to
become false.
It would be smarter to wait for a completion of that busy period, but
enic_api_devcmd_proxy_by_index() is called with other spin locks held which
obviously can't sleep.
Remove the BUG_ON(in_interrupt()) check as well because it's incomplete and
with proper debugging enabled the problem would have been caught from the
debug checks in schedule_timeout().
Fixes: 0b038566c0ea ("drivers/net: enic: Add an interface for USNIC to interact with firmware") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently if an unsupported iftype is detected the error return path
does not free the cmd_skb leading to a resource leak. Fix this by
free'ing cmd_skb.
Addresses-Coverity: ("Resource leak") Fixes: 805b28c05c8e ("qtnfmac: prepare for AP_VLAN interface type support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200925132224.21638-1-colin.king@canonical.com Signed-off-by: Sasha Levin <sashal@kernel.org>
With commit 4f3882177240 hid-input started clearing of "ignored" usages
to avoid using garbage that might have been left in them. However
"battery strength" usages should not be ignored, as we do want to
use them.
Fixes: 498c60153ebb ("quota: Implement quota format with 64-bit space and inode limits") Link: https://lore.kernel.org/r/20200924183619.4176790-1-edumazet@google.com Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jan Kara <jack@suse.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
CFI validates that all indirect calls go to a function with the same
exact function pointer prototype. In this case, dwc2_set_bcm_params
is the target, which has a parameter of type 'struct dwc2_hsotg *',
but it is being implicitly cast to have a parameter of type 'void *'
because that is the set_params function pointer prototype. Make the
function pointer protoype match the definitions so that there is no
more violation.
Recently we applied a fix to cover the whole OSS sequencer ioctls with
the mutex for dealing with the possible races. This works fine in
general, but in theory, this may lead to unexpectedly long stall if an
ioctl like SNDCTL_SEQ_SYNC is issued and an event with the far future
timestamp was queued.
For fixing such a potential stall, this patch changes the mutex lock
applied conditionally excluding such an ioctl command. Also, change
the mutex_lock() with the interruptible version for user to allow
escaping from the big-hammer mutex.
Inside __scif_pin_pages(), when map_flags != SCIF_MAP_KERNEL it
will call pin_user_pages_fast() to map nr_pages. However,
pin_user_pages_fast() might fail with a return value -ERRNO.
The return value is stored in pinned_pages->nr_pages. which in
turn is passed to unpin_user_pages(), which expects
pinned_pages->nr_pages >=0, else disaster.
Fix this by assigning pinned_pages->nr_pages to 0 if
pin_user_pages_fast() returns -ERRNO.
Fixes: ba612aa8b487 ("misc: mic: SCIF memory registration and unregistration") Cc: John Hubbard <jhubbard@nvidia.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Link: https://lore.kernel.org/r/1600570295-29546-1-git-send-email-jrdr.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The "tsid" is a user controlled u8 which comes from debugfs. Values
more than 15 are invalid because "active_tsids" is a 16 bit variable.
If the value of "tsid" is more than 31 then that leads to a shift
wrapping bug.
Fixes: 8fffd9e5ec9e ("ath6kl: Implement support for QOS-enable and QOS-disable from userspace") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200918142732.GA909725@mwanda Signed-off-by: Sasha Levin <sashal@kernel.org>
On page 23 of the datasheet [0] it says "The register remains unchanged
until the interrupt is cleared via a read of INTCAP or GPIO." Include
INTCAPA and INTCAPB registers in precious range, so that they aren't
accidentally cleared when we read via debugfs.
The mcp23x17_regmap is initialised with structs named "mcp23x16".
However, the mcp23s08 driver doesn't support the MCP23016 device yet, so
this appears to be a typo.
Fixes: 8f38910ba4f6 ("pinctrl: mcp23s08: switch to regmap caching") Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200828213226.1734264-2-thomas.preston@codethink.co.uk Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This code doesn't check if "settings->startup_profile" is within bounds
and that could result in an out of bounds array access. What the code
does do is it checks if the settings can be written to the firmware, so
it's possible that the firmware has a bounds check? It's safer and
easier to verify when the bounds checking is done in the kernel.
Fixes: 14bf62cde794 ("HID: add driver for Roccat Kone gaming mouse") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
The pixclock is being set locally because it is being passed as a
pass-by-value argument rather than pass-by-reference, so the computed
pixclock is never being set in var->pixclock. Fix this by passing
by reference.
[This dates back to 2002, I found the offending commit from the git
history git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git ]
Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@intel.com>
[b.zolnierkie: minor patch summary fixup]
[b.zolnierkie: removed "Fixes:" tag (not in upstream tree)] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200723170227.996229-1-colin.king@canonical.com Signed-off-by: Sasha Levin <sashal@kernel.org>
When the user requests a high enough period ns value, then the
calculations in pwm_lpss_prepare() might result in a base_unit value of 0.
But according to the data-sheet the way the PWM controller works is that
each input clock-cycle the base_unit gets added to a N bit counter and
that counter overflowing determines the PWM output frequency. Adding 0
to the counter is a no-op. The data-sheet even explicitly states that
writing 0 to the base_unit bits will result in the PWM outputting a
continuous 0 signal.
When the user requestes a low enough period ns value, then the
calculations in pwm_lpss_prepare() might result in a base_unit value
which is bigger then base_unit_range - 1. Currently the codes for this
deals with this by applying a mask:
base_unit &= (base_unit_range - 1);
But this means that we let the value overflow the range, we throw away the
higher bits and store whatever value is left in the lower bits into the
register leading to a random output frequency, rather then clamping the
output frequency to the highest frequency which the hardware can do.
This commit fixes both issues by clamping the base_unit value to be
between 1 and (base_unit_range - 1).
Fixes: 684309e5043e ("pwm: lpss: Avoid potential overflow of base_unit") Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200903112337.4113-5-hdegoede@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
According to the data-sheet the way the PWM controller works is that
each input clock-cycle the base_unit gets added to a N bit counter and
that counter overflowing determines the PWM output frequency.
So assuming e.g. a 16 bit counter this means that if base_unit is set to 1,
after 65535 input clock-cycles the counter has been increased from 0 to
65535 and it will overflow on the next cycle, so it will overflow after
every 65536 clock cycles and thus the calculations done in
pwm_lpss_prepare() should use 65536 and not 65535.
This commit fixes this. Note this also aligns the calculations in
pwm_lpss_prepare() with those in pwm_lpss_get_state().
Note this effectively reverts commit 684309e5043e ("pwm: lpss: Avoid
potential overflow of base_unit"). The next patch in this series really
fixes the potential overflow of the base_unit value.
Fixes: 684309e5043e ("pwm: lpss: Avoid potential overflow of base_unit") Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200903112337.4113-4-hdegoede@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
b6da31b2c07c "tty: Fix data race in tty_insert_flip_string_fixed_flag"
puts tty_flip_buffer_push under port->lock introducing the following
possible circular locking dependency:
[30129.876566] ======================================================
[30129.876566] WARNING: possible circular locking dependency detected
[30129.876567] 5.9.0-rc2+ #3 Tainted: G S W
[30129.876568] ------------------------------------------------------
[30129.876568] sysrq.sh/1222 is trying to acquire lock:
[30129.876569] ffffffff92c39480 (console_owner){....}-{0:0}, at: console_unlock+0x3fe/0xa90
[30129.876572] but task is already holding lock:
[30129.876572] ffff888107cb9018 (&pool->lock/1){-.-.}-{2:2}, at: show_workqueue_state.cold.55+0x15b/0x6ca
[30129.876576] which lock already depends on the new lock.
[30129.876577] the existing dependency chain (in reverse order) is:
The code currently NULLs tty->driver_data in hvcs_close() with the
intent of informing the next call to hvcs_open() that device needs to be
reconfigured. However, when hvcs_cleanup() is called we copy hvcsd from
tty->driver_data which was previoulsy NULLed by hvcs_close() and our
call to tty_port_put(&hvcsd->port) doesn't actually do anything since
&hvcsd->port ends up translating to NULL by chance. This has the side
effect that when hvcs_remove() is called we have one too many port
references preventing hvcs_destuct_port() from ever being called. This
also prevents us from reusing the /dev/hvcsX node in a future
hvcs_probe() and we can eventually run out of /dev/hvcsX devices.
Fix this by waiting to NULL tty->driver_data in hvcs_cleanup().
parse_options() in drivers/tty/serial/earlycon.c calls uart_parse_earlycon
in drivers/tty/serial/serial_core.c therefore selecting SERIAL_EARLYCON
should automatically select SERIAL_CORE, otherwise will result in symbol
not found error during linking if SERIAL_CORE is not configured as builtin
In a couple of places in qp_host_get_user_memory(),
get_user_pages_fast() is called without properly checking for errors. If
e.g. -EFAULT is returned, this negative value will then be passed on to
qp_release_pages(), which expects a u64 as input.
Fix this by only calling qp_release_pages() when we have a positive
number returned.
When of_property_read_u32_array() returns an error code, a
pairing refcount decrement is needed to keep np's refcount
balanced.
Fixes: f705806c9f355 ("backlight: Add support Skyworks SKY81452 backlight driver") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Reviewing this block of code in cdv_intel_dp_init()
ret = cdv_intel_dp_aux_native_read(gma_encoder, DP_DPCD_REV, ...
cdv_intel_edp_panel_vdd_off(gma_encoder);
if (ret == 0) {
/* if this fails, presume the device is a ghost */
DRM_INFO("failed to retrieve link info, disabling eDP\n");
drm_encoder_cleanup(encoder);
cdv_intel_dp_destroy(connector);
goto err_priv;
} else {
The (ret == 0) is not strict enough.
cdv_intel_dp_aux_native_read() returns > 0 on success
otherwise it is failure.
brcmfmac/core.c:490:4: warning: Dereference of null pointer
(*ifp)->ndev->stats.rx_errors++;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In this block of code
if (ret || !(*ifp) || !(*ifp)->ndev) {
if (ret != -ENODATA && *ifp)
(*ifp)->ndev->stats.rx_errors++;
brcmu_pkt_buf_free_skb(skb);
return -ENODATA;
}
(*ifp)->ndev being NULL is caught as an error
But then it is used to report the error.
So add a check before using it.
Fixes: 91b632803ee4 ("brcmfmac: Use net_device_stats from struct net_device") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200802161804.6126-1-trix@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
i2sctl register value is set to 0 during hw_free(). This
impacts any ongoing concurrent session on the same i2s
port. As trigger() stop already resets enable bit to 0,
there is no need of explicit hw_free. Removing it to
fix the issue.
Fixes: 80beab8e1d86 ("ASoC: qcom: Add LPASS CPU DAI driver") Signed-off-by: Rohit kumar <rohitkr@codeaurora.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/1597402388-14112-7-git-send-email-rohitkr@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The value of "htc_hdr->endpoint_id" comes from skb->data so Smatch marks
it as untrusted so we have to check it before using it as an array
offset.
This is similar to a bug that syzkaller found in commit e4ff08a4d727
("ath9k: Fix use-after-free Write in ath9k_htc_rx_msg") so it is
probably a real issue.
Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200813141253.GA457408@mwanda Signed-off-by: Sasha Levin <sashal@kernel.org>
The value for "aid" comes from skb->data so Smatch marks it as
untrusted. If it's invalid then it can result in an out of bounds array
access in ath6kl_add_new_sta().
Fixes: 572e27c00c9d ("ath6kl: Fix AP mode connect event parsing and TIM updates") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200813141315.GB457408@mwanda Signed-off-by: Sasha Levin <sashal@kernel.org>
If hci_uart_tty_close() or hci_uart_unregister_device() is called while
hu->init_ready is scheduled, hci_register_dev() could be called after
the hci_uart is torn down. Avoid this by ensuring the work is complete
or canceled before checking the HCI_UART_REGISTERED flag.
Fixes: 9f2aee848fe6 ("Bluetooth: Add delayed init sequence support for UART controllers") Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is expected that the returned counters by .get_survey are monotonic
increasing. But the data from ath10k gets reset to zero regularly. Channel
active/busy time are then showing incorrect values (less than previous or
sometimes zero) for the currently active channel during successive survey
dump commands.
example:
$ iw dev wlan0 survey dump
Survey data from wlan0
frequency: 5180 MHz [in use]
channel active time: 54995 ms
channel busy time: 432 ms
channel receive time: 0 ms
channel transmit time: 59 ms
...
$ iw dev wlan0 survey dump
Survey data from wlan0
frequency: 5180 MHz [in use]
channel active time: 32592 ms
channel busy time: 254 ms
channel receive time: 0 ms
channel transmit time: 0 ms
...
The correct way to handle this is to use the non-clearing
WMI_BSS_SURVEY_REQ_TYPE_READ wmi_bss_survey_req_type. The firmware will
then accumulate the survey data and handle wrap arounds.
When creating a new regulator its supply cannot create the sysfs link
because the device is not yet published. Remove early supply resolving
since it will be done later anyway. This makes the following error
disappear and the symlinks get created instead.
DCDC_REG1: supplied by VSYS
VSYS: could not add device link regulator.3 err -2
Note: It doesn't fix the problem for bypassed regulators, though.
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, causing incorrect ref count if
pm_runtime_put_noidle() is not called in error handling paths.
And also, when the call of function vpe_runtime_get() failed,
we won't call vpe_runtime_put().
Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails
inside vpe_runtime_get().
Fixes: 4571912743ac ("[media] v4l: ti-vpe: Add VPE mem to mem driver") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, causing incorrect ref count if
pm_runtime_put_noidle() is not called in error handling paths.
Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails.
Fixes: c5086f130a77 ("[media] s5p-mfc: Use clock gating only on MFC v5 hardware") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, causing incorrect ref count if
pm_runtime_put_noidle() is not called in error handling paths.
Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails.
tc358743.c:1468:9: warning: Branch condition evaluates
to a garbage value
return handled ? IRQ_HANDLED : IRQ_NONE;
^~~~~~~
handled should be initialized to false.
Fixes: d747b806abf4 ("[media] tc358743: add direct interrupt handling") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the init loop, if an error occurs in function 'dma_alloc_coherent',
then goto the err_cleanup section, after run i--,
in the array ring, the struct mtk_ring with index i will not be released,
causing memory leaks
Fixes: 785e5c616c849 ("crypto: mediatek - Add crypto driver support for some MediaTek chips") Cc: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Xiaoliang Pang <dawning.pang@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Running export/import for hashes in peculiar order (mostly done by
openssl) can mess up the internal book keeping of the OMAP SHA core.
Fix by forcibly writing the correct DIGCNT back to hardware. This issue
was noticed while transitioning to openssl 1.1 support.
The media controller core prints a warning when an entity is registered
without a function being set. This affects the uvcvideo driver, as the
warning was added without first addressing the issue in existing
drivers. The problem is harmless, but unnecessarily worries users. Fix
it by mapping UVC entity types to MC entity functions as accurately as
possible using the existing functions.
Fixes: b50bde4e476d ("[media] v4l2-subdev: use MEDIA_ENT_T_UNKNOWN for new subdevs") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
m5mols_core.c:767:4: warning: Called function pointer
is null (null dereference) [core.CallAndMessage]
info->set_power(&client->dev, 0);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In other places, the set_power ptr is checked.
So add a check.
Fixes: bc125106f8af ("[media] Add support for M-5MOLS 8 Mega Pixel camera ISP") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The "idle" pinctrl state is optional as documented in the DT binding.
The change introduced by the commit being reverted makes that pinctrl state
mandatory and breaks initialization of the whole media driver, since the
"idle" state is not specified in any mainline dts.
This reverts commit 18ffec750578 ("media: exynos4-is: Add missed check for pinctrl_lookup_state()")
to fix the regression.
tuner-simple.c:714:13: warning: Assigned value is
garbage or undefined
buffer[1] = buffer[3];
^ ~~~~~~~~~
In simple_set_radio_freq buffer[3] used to be done
in-function with a switch of tuner type, now done
by a call to simple_radio_bandswitch which has this case
case TUNER_TENA_9533_DI:
case TUNER_YMEC_TVF_5533MF:
tuner_dbg("This tuner doesn't ...
return 0;
which does not set buffer[3]. In the old logic, this case
would have returned 0 from simple_set_radio_freq.
Recover this old behavior by returning an error for this
codition. Since the old simple_set_radio_freq behavior
returned a 0, do the same.
Fixes: c7a9f3aa1e1b ("V4L/DVB (7129): tuner-simple: move device-specific code into three separate functions") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
I removed the MAY_BACKLOG flag on the aio path a while ago but
the error check still incorrectly interpreted EBUSY as success.
This may cause the submitter to wait for a request that will never
complete.
Fixes: dad419970637 ("crypto: algif_skcipher - Do not set...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
This is due to use of an uninitialized local resource struct in the xgene
pmu driver. The thunderx2_pmu driver avoids this by using the resource list
constructed by acpi_dev_get_resources() rather than using a callback from
that function. The callback in the xgene driver didn't fully initialize
the resource. So get rid of the callback and search the resource list as
done by thunderx2.
Fixes: 832c927d119b ("perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver") Signed-off-by: Mark Salter <msalter@redhat.com> Link: https://lore.kernel.org/r/20200915204110.326138-1-msalter@redhat.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
0c2a3913d6f5 ("x86/fpu: Parse clearcpuid= as early XSAVE argument")
changed clearcpuid parsing from __setup() to cmdline_find_option().
While the __setup() function would have been called for each clearcpuid=
parameter on the command line, cmdline_find_option() will only return
the last one, so the change effectively made it impossible to disable
more than one bit.
Allow a comma-separated list of bit numbers as the argument for
clearcpuid to allow multiple bits to be disabled again. Log the bits
being disabled for informational purposes.
Also fix the check on the return value of cmdline_find_option(). It
returns -1 when the option is not found, so testing as a boolean is
incorrect.
When pci_get_device_func() fails, the driver doesn't need to execute
pci_dev_put(). mci should still be freed, though, to prevent a memory
leak. When pci_enable_device() fails, the error injection PCI device
"einj" doesn't need to be disabled either.
[ bp: Massage commit message, rename label to "bail_mc_free". ]
Fixes: 52608ba205461 ("i5100_edac: probe for device 19 function 0") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200826121437.31606-1-dinghao.liu@zju.edu.cn Signed-off-by: Sasha Levin <sashal@kernel.org>
The async path cannot use MAY_BACKLOG because it is not meant to
block, which is what MAY_BACKLOG does. On the other hand, both
the sync and async paths can make use of MAY_SLEEP.
Fixes: 83094e5e9e49 ("crypto: af_alg - add async support to...") Cc: <stable@vger.kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Errors returned by crypto_shash_update() are not checked in
ima_calc_boot_aggregate_tfm() and thus can be overwritten at the next
iteration of the loop. This patch adds a check after calling
crypto_shash_update() and returns immediately if the result is not zero.
Cc: stable@vger.kernel.org Fixes: 3323eec921efd ("integrity: IMA as an integrity service provider") Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function amd_ir_set_vcpu_affinity makes use of the parameter struct
amd_iommu_pi_data.prev_ga_tag to determine if it should delete struct
amd_iommu_pi_data from a list when not running in AVIC mode.
However, prev_ga_tag is initialized only when AVIC is enabled. The non-zero
uninitialized value can cause unintended code path, which ends up making
use of the struct vcpu_svm.ir_list and ir_list_lock without being
initialized (since they are intended only for the AVIC case).
This triggers NULL pointer dereference bug in the function vm_ir_list_del
with the following call trace:
Call kvm_mmu_commit_zap_page() after exiting the "prepare zap" loop in
kvm_recover_nx_lpages() to finish zapping pages in the unlikely event
that the loop exited due to lpage_disallowed_mmu_pages being empty.
Because the recovery thread drops mmu_lock() when rescheduling, it's
possible that lpage_disallowed_mmu_pages could be emptied by a different
thread without to_zap reaching zero despite to_zap being derived from
the number of disallowed lpages.
Fixes: 1aa9b9572b105 ("kvm: x86: mmu: Recovery of shattered NX large pages") Cc: Junaid Shahid <junaids@google.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923183735.584-2-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In crypt_message, when smb2_get_enc_key returns error, we need to
return the error back to the caller. If not, we end up processing
the message further, causing a kernel oops due to unwarranted access
of memory.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "end" pointer is either NULL or it points to the next byte to parse.
If there isn't a next byte then dereferencing "end" is an off-by-one out
of bounds error. And, of course, if it's NULL that leads to an Oops.
Printing "*end" doesn't seem very useful so let's delete this code.
Also for the last debug statement, I noticed that it should be printing
"sequence_end" instead of "end" so fix that as well.
Reported-by: Dominik Maier <dmaier@sect.tu-berlin.de> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Keyu Man reported that the ICMP rate limiter could be used
by attackers to get useful signal. Details will be provided
in an upcoming academic publication.
Our solution is to add some noise, so that the attackers
no longer can get help from the predictable token bucket limiter.
Fixes: 4cdf507d5452 ("icmp: add a global rate limitation") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Keyu Man <kman001@ucr.edu> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the header prediction fast path for a bulk data receiver, if no
data is newly acknowledged then we do not call tcp_ack() and do not
call tcp_ack_update_window(). This means that a bulk receiver that
receives large amounts of data can have the incoming sequence numbers
wrap, so that the check in tcp_may_update_window fails:
after(ack_seq, tp->snd_wl1)
If the incoming receive windows are zero in this state, and then the
connection that was a bulk data receiver later wants to send data,
that connection can find itself persistently rejecting the window
updates in incoming ACKs. This means the connection can persistently
fail to discover that the receive window has opened, which in turn
means that the connection is unable to send anything, and the
connection's sending process can get permanently "stuck".
The fix is to update snd_wl1 in the header prediction fast path for a
bulk data receiver, so that it keeps up and does not see wrapping
problems.
This fix is based on a very nice and thorough analysis and diagnosis
by Apollon Oikonomopoulos (see link below).
This is a stable candidate but there is no Fixes tag here since the
bug predates current git history. Just for fun: looks like the bug
dates back to when header prediction was added in Linux v2.1.8 in Nov
1996. In that version tcp_rcv_established() was added, and the code
only updates snd_wl1 in tcp_ack(), and in the new "Bulk data transfer:
receiver" code path it does not call tcp_ack(). This fix seems to
apply cleanly at least as far back as v3.2.
Check that the NFC_ATTR_FIRMWARE_NAME attributes are provided by
the netlink client prior to accessing them.This prevents potential
unhandled NULL pointer dereference exceptions which can be triggered
by malicious user-mode programs, if they omit one or both of these
attributes.
Similar to commit a0323b979f81 ("nfc: Ensure presence of required attributes in the activate_target handler").
This driver calls ether_setup to set up the network device.
The ether_setup function would add the IFF_TX_SKB_SHARING flag to the
device. This flag indicates that it is safe to transmit shared skbs to
the device.
However, this is not true. This driver may pad the frame (in eth_tx)
before transmission, so the skb may be modified.
Fixes: 550fd08c2ceb ("net: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared") Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Xie He <xie.he.0141@gmail.com> Link: https://lore.kernel.org/r/20201020063420.187497-1-xie.he.0141@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The hdlc_rcv function is used as hdlc_packet_type.func to process any
skb received in the kernel with skb->protocol == htons(ETH_P_HDLC).
The purpose of this function is to provide second-stage processing for
skbs not assigned a "real" L3 skb->protocol value in the first stage.
This function assumes the device from which the skb is received is an
HDLC device (a device created by this module). It assumes that
netdev_priv(dev) returns a pointer to "struct hdlc_device".
However, it is possible that some driver in the kernel (not necessarily
in our control) submits a received skb with skb->protocol ==
htons(ETH_P_HDLC), from a non-HDLC device. In this case, the skb would
still be received by hdlc_rcv. This will cause problems.
hdlc_rcv should be able to recognize and drop invalid skbs. It should
first make sure "dev" is actually an HDLC device, before starting its
processing. This patch adds this check to hdlc_rcv.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Xie He <xie.he.0141@gmail.com> Link: https://lore.kernel.org/r/20201020013152.89259-1-xie.he.0141@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When releasing a thread todo list when tearing down
a binder_proc, the following race was possible which
could result in a use-after-free:
1. Thread 1: enter binder_release_work from binder_thread_release
2. Thread 2: binder_update_ref_for_handle() -> binder_dec_node_ilocked()
3. Thread 2: dec nodeA --> 0 (will free node)
4. Thread 1: ACQ inner_proc_lock
5. Thread 2: block on inner_proc_lock
6. Thread 1: dequeue work (BINDER_WORK_NODE, part of nodeA)
7. Thread 1: REL inner_proc_lock
8. Thread 2: ACQ inner_proc_lock
9. Thread 2: todo list cleanup, but work was already dequeued
10. Thread 2: free node
11. Thread 2: REL inner_proc_lock
12. Thread 1: deref w->type (UAF)
The problem was that for a BINDER_WORK_NODE, the binder_work element
must not be accessed after releasing the inner_proc_lock while
processing the todo list elements since another thread might be
handling a deref on the node containing the binder_work element
leading to the node being freed.
Petr reported that after resume from suspend RTL8402 partially
truncates incoming packets, and re-initializing register RxConfig
before the actual chip re-initialization sequence is needed to avoid
the issue.
Reported-by: Petr Tesarik <ptesarik@suse.cz> Proposed-by: Petr Tesarik <ptesarik@suse.cz> Tested-by: Petr Tesarik <ptesarik@suse.cz> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Documentation/networking/ip-sysctl.txt:46 says:
ip_forward_use_pmtu - BOOLEAN
By default we don't trust protocol path MTUs while forwarding
because they could be easily forged and can lead to unwanted
fragmentation by the router.
You only need to enable this if you have user-space software
which tries to discover path mtus by itself and depends on the
kernel honoring this information. This is normally not the case.
Default: 0 (disabled)
Possible values:
0 - disabled
1 - enabled
Which makes it pretty clear that setting it to 1 is a potential
security/safety/DoS issue, and yet it is entirely reasonable to want
forwarded traffic to honour explicitly administrator configured
route mtus (instead of defaulting to device mtu).
Indeed, I can't think of a single reason why you wouldn't want to.
Since you configured a route mtu you probably know better...
It is pretty common to have a higher device mtu to allow receiving
large (jumbo) frames, while having some routes via that interface
(potentially including the default route to the internet) specify
a lower mtu.
Note that ipv6 forwarding uses device mtu unless the route is locked
(in which case it will use the route mtu).
This approach is not usable for IPv4 where an 'mtu lock' on a route
also has the side effect of disabling TCP path mtu discovery via
disabling the IPv4 DF (don't frag) bit on all outgoing frames.
I'm not aware of a way to lock a route from an IPv6 RA, so that also
potentially seems wrong.
Signed-off-by: Maciej Żenczykowski <maze@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Sunmeet Gill (Sunny) <sgill@quicinc.com> Cc: Vinay Paradkar <vparadka@qti.qualcomm.com> Cc: Tyler Wear <twear@quicinc.com> Cc: David Ahern <dsahern@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
skb_unshare() drops a reference count on the old skb unconditionally,
so in the failure case, we end up freeing the skb twice here.
And because the skb is allocated in fclone and cloned by caller
tipc_msg_reassemble(), the consequence is actually freeing the
original skb too, thus triggered the UAF by syzbot.
Fix this by replacing this skb_unshare() with skb_cloned()+skb_copy().
Fixes: ff48b6222e65 ("tipc: use skb_unshare() instead in tipc_buf_append()") Reported-and-tested-by: syzbot+e96a7ba46281824cc46a@syzkaller.appspotmail.com Cc: Jon Maloy <jmaloy@redhat.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
netcons calls napi_poll with a budget of 0 to transmit packets.
Handle this by:
- skipping RX processing
- do not try to recycle TX packets to the RX cache
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobias reported regressions in IPsec tests following the patch
referenced by the Fixes tag below. The root cause is dropping the
reset of the flowi4_oif after the fib_lookup. Apparently it is
needed for xfrm cases, so restore the oif update to ip_route_output_flow
right before the call to xfrm_lookup_route.
Fixes: 2fbc6e89b2f1 ("ipv4: Update exception handling for multipath routes via same device") Reported-by: Tobias Brunner <tobias@strongswan.org> Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ingress large send packets are identified by either:
The IBMVETH_RXQ_LRG_PKT flag in the receive buffer
or with a -1 placed in the ip header checksum.
The method used depends on firmware version. Frame
geometry and sufficient header validation is performed by the
hypervisor eliminating the need for further header checks here.
Fixes: 7b5967389f5a ("ibmveth: set correct gso_size and gso_type") Signed-off-by: David Wilder <dwilder@us.ibm.com> Reviewed-by: Thomas Falcon <tlfalcon@linux.ibm.com> Reviewed-by: Cristobal Forno <cris.forno@ibm.com> Reviewed-by: Pradeep Satyanarayana <pradeeps@linux.vnet.ibm.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ibmveth_rx_csum_helper() must be called after ibmveth_rx_mss_helper()
as ibmveth_rx_csum_helper() may alter ip and tcp checksum values.
Fixes: 66aa0678efc2 ("ibmveth: Support to enable LSO/CSO for Trunk VEA.") Signed-off-by: David Wilder <dwilder@us.ibm.com> Reviewed-by: Thomas Falcon <tlfalcon@linux.ibm.com> Reviewed-by: Cristobal Forno <cris.forno@ibm.com> Reviewed-by: Pradeep Satyanarayana <pradeeps@linux.vnet.ibm.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Return -EINVAL for authenc(hmac(sha1),cbc(aes)),
authenc(hmac(sha256),cbc(aes)) and authenc(hmac(sha512),cbc(aes))
if the cipher length is not multiple of the AES block.
This is to prevent an undefined device behaviour.
The setkey function for GCM/CCM algorithms didn't verify the key
length before copying the key and subtracting the salt length.
This patch delays the copying of the key til after the verification
has been done. It also adds checks on the key length to ensure
that it's at least as long as the salt.
Orion5.x systems are still using machine files and not device-tree.
Commit 96cb4342382290c9 ("net: mvmdio: allow up to three clocks to be
specified for orion-mdio") has replaced devm_clk_get() with of_clk_get(),
leading to a oops at boot and not working network, as reported in
https://lists.debian.org/debian-arm/2019/07/msg00088.html and possibly in
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=908712.
Link: https://lists.debian.org/debian-arm/2019/07/msg00088.html Fixes: 96cb4342382290c9 ("net: mvmdio: allow up to three clocks to be specified for orion-mdio") Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With suitably crafted reiserfs image and mount command reiserfs will
crash when trying to verify that XATTR_ROOT directory can be looked up
in / as that recurses back to xattr code like:
reiserfs_read_locked_inode() didn't initialize key length properly. Use
_make_cpu_key() macro for key initialization so that all key member are
properly initialized.
CC: stable@vger.kernel.org Reported-by: syzbot+d94d02749498bb7bab4b@syzkaller.appspotmail.com Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There exist many FT2232-based JTAG+UART adapter designs in which
FT2232 Channel A is used for JTAG and Channel B is used for UART.
The best way to handle them in Linux is to have the ftdi_sio driver
create a ttyUSB device only for Channel B and not for Channel A:
a ttyUSB device for Channel A would be bogus and will disappear as
soon as the user runs OpenOCD or other applications that access
Channel A for JTAG from userspace, causing undesirable noise for
users. The ftdi_sio driver already has a dedicated quirk for such
JTAG+UART FT2232 adapters, and it requires assigning custom USB IDs
to such adapters and adding these IDs to the driver with the
ftdi_jtag_quirk applied.
Boutique hardware manufacturer Falconia Partners LLC has created a
couple of JTAG+UART adapter designs (one buffered, one unbuffered)
as part of FreeCalypso project, and this hardware is specifically made
to be used with Linux hosts, with the intent that Channel A will be
accessed only from userspace via appropriate applications, and that
Channel B will be supported by the ftdi_sio kernel driver, presenting
a standard ttyUSB device to userspace. Toward this end the hardware
manufacturer will be programming FT2232 EEPROMs with custom USB IDs,
specifically with the intent that these IDs will be recognized by
the ftdi_sio driver with the ftdi_jtag_quirk applied.
Signed-off-by: Mychaela N. Falconia <falcon@freecalypso.org>
[johan: insert in PID order and drop unused define] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While finding usb endpoints in vmk80xx_find_usb_endpoints(), check if
wMaxPacketSize = 0 for the endpoints found.
Some devices have isochronous endpoints that have wMaxPacketSize = 0
(as required by the USB-2 spec).
However, since this doesn't apply here, wMaxPacketSize = 0 can be
considered to be invalid.
projects / users / dwmw2 / linux.git / log