John Garry [Mon, 11 Nov 2024 11:21:45 +0000 (11:21 +0000)]
block: Rework bio_split() return value
Instead of returning an inconclusive value of NULL for an error in calling
bio_split(), return a ERR_PTR() always.
Also remove the BUG_ON() calls, and WARN_ON_ONCE() instead. Indeed, since
almost all callers don't check the return code from bio_split(), we'll
crash anyway (for those failures).
Fix up the only user which checks bio_split() return code today (directly
or indirectly), blk_crypto_fallback_split_bio_if_needed(). The md/bcache
code does check the return code in cached_dev_cache_miss() ->
bio_next_split() -> bio_split(), but only to see if there was a split, so
there would be no change in behaviour here (when returning a ERR_PTR()).
and UBLK_MAX_QUEUE_DEPTH is 4096 and part of UAPI, so 'max_cmd_buf_size'
is always page aligned in 4K page size kernel. However, it isn't true in
64K page size kernel.
Fixes the issue by always rounding up 'max_cmd_buf_size' with PAGE_SIZE.
In case of an early failure in dasd_init, dasd_proc_init is never
called and /proc/dasd* files are never created. That can happen, for
example, if an incompatible or incorrect argument is provided to the
dasd_mod.dasd= kernel parameter.
However, the attempted removal of /proc/dasd* files causes 8 warnings
and backtraces in this case. 4 on the error path within dasd_init and
4 when the dasd module is unloaded. Notice the "removing permanent
/proc entry 'devices'" message that is caused by the dasd_proc_exit
function trying to remove /proc/devices instead of /proc/dasd/devices
since dasd_proc_root_entry is NULL and /proc/devices is indeed
permanent. Example:
------------[ cut here ]------------
removing permanent /proc entry 'devices'
WARNING: CPU: 6 PID: 557 at fs/proc/generic.c:701 remove_proc_entry+0x22e/0x240
While the cause is a user failure, the dasd module should handle the
situation more gracefully. One of the simplest solutions is to make
removal of the /proc/dasd* entries idempotent.
Jens Axboe [Sun, 10 Nov 2024 03:06:13 +0000 (20:06 -0700)]
Merge tag 'md-6.13-20241107' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.13/block
Pull raid5 fix from Song.
* tag 'md-6.13-20241107' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
MAINTAINERS: Make Yu Kuai co-maintainer of md/raid subsystem
md/raid5: Wait sync io to finish before changing group cnt
Li Wang [Sat, 9 Nov 2024 02:27:44 +0000 (10:27 +0800)]
loop: fix type of block size
PAGE_SIZE may be 64K, and the max block size can be PAGE_SIZE, so any
variable for holding block size can't be defined as 'unsigned short'.
Unfortunately commit 473516b36193 ("loop: use the atomic queue limits
update API") passes 'bsize' with type of 'unsigned short' to
loop_reconfigure_limits(), and causes LTP/ioctl_loop06 test failure:
12 ioctl_loop06.c:76: TINFO: Using LOOP_SET_BLOCK_SIZE with arg > PAGE_SIZE
13 ioctl_loop06.c:59: TFAIL: Set block size succeed unexpectedly
...
18 ioctl_loop06.c:76: TINFO: Using LOOP_CONFIGURE with block_size > PAGE_SIZE
19 ioctl_loop06.c:59: TFAIL: Set block size succeed unexpectedly
Fixes the issue by defining 'block size' variable with 'unsigned int', which is
aligned with block layer's definition.
(improve commit log & add fixes tag)
Fixes: 473516b36193 ("loop: use the atomic queue limits update API") Cc: John Garry <john.g.garry@oracle.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Li Wang <liwang@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20241109022744.1126003-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Xiao Ni [Wed, 6 Nov 2024 09:51:24 +0000 (17:51 +0800)]
md/raid5: Wait sync io to finish before changing group cnt
One customer reports a bug: raid5 is hung when changing thread cnt
while resync is running. The stripes are all in conf->handle_list
and new threads can't handle them.
Commit b39f35ebe86d ("md: don't quiesce in mddev_suspend()") removes
pers->quiesce from mddev_suspend/resume. Before this patch, mddev_suspend
needs to wait for all ios including sync io to finish. Now it's used
to only wait normal io.
Fix this by calling raid5_quiesce from raid5_store_group_thread_cnt
directly to wait all sync requests to finish before changing the group
cnt.
Fixes: b39f35ebe86d ("md: don't quiesce in mddev_suspend()") Cc: stable@vger.kernel.org Signed-off-by: Xiao Ni <xni@redhat.com> Reviewed-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20241106095124.74577-1-xni@redhat.com Signed-off-by: Song Liu <song@kernel.org>
Ming Lei [Thu, 31 Oct 2024 13:37:20 +0000 (21:37 +0800)]
block: don't verify IO lock for freeze/unfreeze in elevator_init_mq()
elevator_init_mq() is only called at the entry of add_disk_fwnode() when
disk IO isn't allowed yet.
So not verify io lock(q->io_lockdep_map) for freeze & unfreeze in
elevator_init_mq().
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reported-by: Lai Yi <yi1.lai@linux.intel.com> Fixes: f1be1788a32e ("block: model freeze & enter queue as lock for supporting lockdep") Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20241031133723.303835-5-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Thu, 31 Oct 2024 13:37:19 +0000 (21:37 +0800)]
block: always verify unfreeze lock on the owner task
commit f1be1788a32e ("block: model freeze & enter queue as lock for
supporting lockdep") tries to apply lockdep for verifying freeze &
unfreeze. However, the verification is only done the outmost freeze and
unfreeze. This way is actually not correct because q->mq_freeze_depth
still may drop to zero on other task instead of the freeze owner task.
Fix this issue by always verifying the last unfreeze lock on the owner
task context, and make sure both the outmost freeze & unfreeze are
verified in the current task.
Damien Le Moal [Thu, 7 Nov 2024 06:43:00 +0000 (15:43 +0900)]
block: Add a public bdev_zone_is_seq() helper
Turn the private disk_zone_is_conv() function in blk-zoned.c into a
public and documented bdev_zone_is_seq() helper with the inverse
polarity of the original function, also adding a check for non-zoned
devices so that all file systems can use the helper, even with a regular
block device.
Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20241107064300.227731-3-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Thu, 7 Nov 2024 06:42:59 +0000 (15:42 +0900)]
block: RCU protect disk->conv_zones_bitmap
Ensure that a disk revalidation changing the conventional zones bitmap
of a disk does not cause invalid memory references when using the
disk_zone_is_conv() helper by RCU protecting the disk->conv_zones_bitmap
pointer.
disk_zone_is_conv() is modified to operate under the RCU read lock and
the function disk_set_conv_zones_bitmap() is added to update a disk
conv_zones_bitmap pointer using rcu_replace_pointer() with the disk
zone_wplugs_lock spinlock held.
disk_free_zone_resources() is modified to call
disk_update_zone_resources() with a NULL bitmap pointer to free the disk
conv_zones_bitmap. disk_set_conv_zones_bitmap() is also used in
disk_update_zone_resources() to set the new (revalidated) bitmap and
free the old one.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20241107064300.227731-2-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
zhangguopeng [Thu, 7 Nov 2024 10:42:58 +0000 (18:42 +0800)]
block: Replace sprintf() with sysfs_emit()
Per Documentation/filesystems/sysfs.rst, show() should only use
sysfs_emit() or sysfs_emit_at() when formatting the value to be
returned to user space.
Jens Axboe [Wed, 6 Nov 2024 14:55:19 +0000 (07:55 -0700)]
Merge tag 'md-6.13-20241105' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.13/block
Pull MD changes from Song:
"1. Enhance handling of faulty and blocked devices, by Yu Kuai.
2. raid5-ppl atomic improvement, by Uros Bizjak.
3. md-bitmap fix, by Yuan Can."
* tag 'md-6.13-20241105' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md/md-bitmap: Add missing destroy_work_on_stack()
md/raid5: don't set Faulty rdev for blocked_rdev
md/raid10: don't wait for Faulty rdev in wait_blocked_rdev()
md/raid1: don't wait for Faulty rdev in wait_blocked_rdev()
md/raid1: factor out helper to handle blocked rdev from raid1_write_request()
md: don't record new badblocks for faulty rdev
md: don't wait faulty rdev in md_wait_for_blocked_rdev()
md: add a new helper rdev_blocked()
md/raid5-ppl: Use atomic64_inc_return() in ppl_new_iounit()
Philipp Stanner [Wed, 6 Nov 2024 14:52:50 +0000 (15:52 +0100)]
mtip32xx: Replace deprecated PCI functions
pcim_iomap_table() and pcim_request_regions() have been deprecated in
commit e354bb84a4c1 ("PCI: Deprecate pcim_iomap_table(),
pcim_iomap_regions_request_all()") and commit d140f80f60358 ("PCI:
Deprecate pcim_iomap_regions() in favor of pcim_iomap_region()"),
respectively.
Yuan Can [Tue, 5 Nov 2024 13:01:05 +0000 (21:01 +0800)]
md/md-bitmap: Add missing destroy_work_on_stack()
This commit add missed destroy_work_on_stack() operations for
unplug_work.work in bitmap_unplug_async().
Fixes: a022325ab970 ("md/md-bitmap: add a new helper to unplug bitmap asynchrously") Cc: stable@vger.kernel.org Signed-off-by: Yuan Can <yuancan@huawei.com> Reviewed-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20241105130105.127336-1-yuancan@huawei.com Signed-off-by: Song Liu <song@kernel.org>
Yu Kuai [Thu, 31 Oct 2024 03:31:14 +0000 (11:31 +0800)]
md/raid5: don't set Faulty rdev for blocked_rdev
Faulty rdev should never be accessed anymore, hence there is no point to
wait for bad block to be acknowledged in this case while handling write
request.
Yu Kuai [Thu, 31 Oct 2024 03:31:13 +0000 (11:31 +0800)]
md/raid10: don't wait for Faulty rdev in wait_blocked_rdev()
Faulty rdev should never be accessed anymore, hence there is no point to
wait for bad block to be acknowledged in this case while handling write
request.
Yu Kuai [Thu, 31 Oct 2024 03:31:12 +0000 (11:31 +0800)]
md/raid1: don't wait for Faulty rdev in wait_blocked_rdev()
Faulty rdev should never be accessed anymore, hence there is no point to
wait for bad block to be acknowledged in this case while handling write
request.
Yu Kuai [Thu, 31 Oct 2024 03:31:11 +0000 (11:31 +0800)]
md/raid1: factor out helper to handle blocked rdev from raid1_write_request()
Currently raid1 is preparing IO for underlying disks while checking if
any disk is blocked, if so allocated resources must be released, then
waiting for rdev to be unblocked and try to prepare IO again.
Make code cleaner by checking blocked rdev first, it doesn't matter if
rdev is blocked while issuing IO, the IO will wait for rdev to be
unblocked or not.
Yu Kuai [Thu, 31 Oct 2024 03:31:10 +0000 (11:31 +0800)]
md: don't record new badblocks for faulty rdev
Faulty will be checked before issuing IO to the rdev, however, rdev can
be faulty at any time, hence it's possible that rdev_set_badblocks()
will be called for faulty rdev. In this case, mddev->sb_flags will be
set and some other path can be blocked by updating super block.
Since faulty rdev will not be accesed anymore, there is no need to
record new babblocks for faulty rdev and forcing updating super block.
Noted this is not a bugfix, just prevent updating superblock in some
corner cases, and will help to slice a bug related to external
metadata[1], testing also shows that devices are removed faster in the
case IO error.
Yu Kuai [Thu, 31 Oct 2024 03:31:09 +0000 (11:31 +0800)]
md: don't wait faulty rdev in md_wait_for_blocked_rdev()
md_wait_for_blocked_rdev() is called for write IO while rdev is
blocked, howerver, rdev can be faulty after choosing this rdev to write,
and faulty rdev should never be accessed anymore, hence there is no point
to wait for faulty rdev to be unblocked.
Yu Kuai [Thu, 31 Oct 2024 03:31:08 +0000 (11:31 +0800)]
md: add a new helper rdev_blocked()
The helper will be used in later patches for raid1/raid10/raid5, the
difference is that Faulty rdev with unacknowledged bad block will not
be considered blocked.
Uros Bizjak [Mon, 7 Oct 2024 08:48:04 +0000 (10:48 +0200)]
md/raid5-ppl: Use atomic64_inc_return() in ppl_new_iounit()
Use atomic64_inc_return(&ref) instead of atomic64_add_return(1, &ref)
to use optimized implementation and ease register pressure around
the primitive for targets that implement optimized variant.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Cc: Song Liu <song@kernel.org> Cc: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Link: https://lore.kernel.org/r/20241007084831.48067-1-ubizjak@gmail.com Signed-off-by: Song Liu <song@kernel.org>
Christoph Hellwig [Mon, 4 Nov 2024 07:39:32 +0000 (08:39 +0100)]
block: pre-calculate max_zone_append_sectors
max_zone_append_sectors differs from all other queue limits in that the
final value used is not stored in the queue_limits but needs to be
obtained using queue_limits_max_zone_append_sectors helper. This not
only adds (tiny) extra overhead to the I/O path, but also can be easily
forgotten in file system code.
Add a new max_hw_zone_append_sectors value to queue_limits which is
set by the driver, and calculate max_zone_append_sectors from that and
the other inputs in blk_validate_zoned_limits, similar to how
max_sectors is calculated to fix this.
Christoph Hellwig [Mon, 4 Nov 2024 07:39:31 +0000 (08:39 +0100)]
block: remove the max_zone_append_sectors check in blk_revalidate_disk_zones
With the lock layer zone append emulation, we are now always setting a
max_zone_append_sectors value for zoned devices and this check can't
ever trigger.
Ming Lei [Sat, 2 Nov 2024 01:42:11 +0000 (09:42 +0800)]
lib/iov_iter: fix bvec iterator setup
.bi_size of bvec iterator should be initialized as real max size for
walking, and .bi_bvec_done just counts how many bytes need to be
skipped in the 1st bvec, so .bi_size isn't related with .bi_bvec_done.
This patch fixes bvec iterator initialization, and the inner `size`
check isn't needed any more, so revert Eric Dumazet's commit 7bc802acf193 ("iov-iter: do not return more bytes than requested in
iov_iter_extract_bvec_pages()").
Cc: Eric Dumazet <edumazet@google.com> Fixes: e4e535bff2bc ("iov_iter: don't require contiguous pages in iov_iter_extract_bvec_pages") Reported-by: syzbot+71abe7ab2b70bca770fd@syzkaller.appspotmail.com Tested-by: syzbot+71abe7ab2b70bca770fd@syzkaller.appspotmail.com Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Wed, 30 Oct 2024 05:18:52 +0000 (06:18 +0100)]
block: remove bio_add_zone_append_page
This is only used by the nvmet zns passthrough code, which can trivially
just use bio_add_pc_page and do the sanity check for the max zone append
limit itself.
All future zoned file systems should follow the btrfs lead and let the
upper layers fill up bios unlimited by hardware constraints and split
them to the limits in the I/O submission handler.
Christoph Hellwig [Wed, 30 Oct 2024 05:18:51 +0000 (06:18 +0100)]
block: remove zone append special casing from the direct I/O path
This code is unused, and all future zoned file systems should follow
the btrfs lead of splitting the bios themselves to the zoned limits
in the I/O submission handler, because if they didn't they would be
hit by commit ed9832bc08db ("block: introduce folio awareness and add
a bigger size from folio") breaking this code when the zone append
limit (that is usually the max_hw_sectors limit) is smaller than the
largest possible folio size.
Keith Busch [Wed, 16 Oct 2024 20:13:09 +0000 (13:13 -0700)]
blk-integrity: remove seed for user mapped buffers
The seed is only used for kernel generation and verification. That
doesn't happen for user buffers, so passing the seed around doesn't
accomplish anything.
loop_init() is calling loop_add() after __register_blkdev() succeeds and
is ignoring disk_add() failure from loop_add(), for loop_add() failure
is not fatal and successfully created disks are already visible to
bdev_open().
brd_init() is currently calling brd_alloc() before __register_blkdev()
succeeds and is releasing successfully created disks when brd_init()
returns an error. This can cause UAF for the latter two case:
case 1:
T1:
modprobe brd
brd_init
brd_alloc(0) // success
add_disk
disk_scan_partitions
bdev_file_open_by_dev // alloc file
fput // won't free until back to userspace
brd_alloc(1) // failed since mem alloc error inject
// error path for modprobe will release code segment
// back to userspace
__fput
blkdev_release
bdev_release
blkdev_put_whole
bdev->bd_disk->fops->release // fops is freed now, UAF!
case 2:
T1: T2:
modprobe brd
brd_init
brd_alloc(0) // success
open(/dev/ram0)
brd_alloc(1) // fail
// error path for modprobe
Ming Lei [Thu, 24 Oct 2024 05:00:15 +0000 (07:00 +0200)]
iov_iter: don't require contiguous pages in iov_iter_extract_bvec_pages
The iov_iter_extract_pages interface allows to return physically
discontiguous pages, as long as all but the first and last page
in the array are page aligned and page size. Rewrite
iov_iter_extract_bvec_pages to take advantage of that instead of only
returning ranges of physically contiguous pages.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
[hch: minor cleanups, new commit log] Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20241024050021.627350-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Fri, 25 Oct 2024 00:37:20 +0000 (08:37 +0800)]
block: model freeze & enter queue as lock for supporting lockdep
Recently we got several deadlock report[1][2][3] caused by
blk_mq_freeze_queue and blk_enter_queue().
Turns out the two are just like acquiring read/write lock, so model them
as read/write lock for supporting lockdep:
1) model q->q_usage_counter as two locks(io and queue lock)
- queue lock covers sync with blk_enter_queue()
- io lock covers sync with bio_enter_queue()
2) make the lockdep class/key as per-queue:
- different subsystem has very different lock use pattern, shared lock
class causes false positive easily
- freeze_queue degrades to no lock in case that disk state becomes DEAD
because bio_enter_queue() won't be blocked any more
- freeze_queue degrades to no lock in case that request queue becomes dying
because blk_enter_queue() won't be blocked any more
3) model blk_mq_freeze_queue() as acquire_exclusive & try_lock
- it is exclusive lock, so dependency with blk_enter_queue() is covered
- it is trylock because blk_mq_freeze_queue() are allowed to run
concurrently
4) model blk_enter_queue() & bio_enter_queue() as acquire_read()
- nested blk_enter_queue() are allowed
- dependency with blk_mq_freeze_queue() is covered
- blk_queue_exit() is often called from other contexts(such as irq), and
it can't be annotated as lock_release(), so simply do it in
blk_enter_queue(), this way still covered cases as many as possible
With lockdep support, such kind of reports may be reported asap and
needn't wait until the real deadlock is triggered.
For example, lockdep report can be triggered in the report[3] with this
patch applied.
[1] occasional block layer hang when setting 'echo noop > /sys/block/sda/queue/scheduler'
https://bugzilla.kernel.org/show_bug.cgi?id=219166
[2] del_gendisk() vs blk_queue_enter() race condition
https://lore.kernel.org/linux-block/20241003085610.GK11458@google.com/
[3] queue_freeze & queue_enter deadlock in scsi
https://lore.kernel.org/linux-block/ZxG38G9BuFdBpBHZ@fedora/T/#u
Ming Lei [Fri, 25 Oct 2024 00:37:18 +0000 (08:37 +0800)]
blk-mq: add non_owner variant of start_freeze/unfreeze queue APIs
Add non_owner variant of start_freeze/unfreeze queue APIs, so that the
caller knows that what they are doing, and we can skip lockdep support
for non_owner variant in per-call level.
Prepare for supporting lockdep for freezing/unfreezing queue.
Bart Van Assche [Wed, 23 Oct 2024 20:28:50 +0000 (13:28 -0700)]
blk-mq: Unexport blk_mq_flush_busy_ctxs()
Commit a6088845c2bf ("block: kyber: make kyber more friendly with merging")
removed the only blk_mq_flush_busy_ctxs() call from outside the block layer
core. Hence unexport blk_mq_flush_busy_ctxs().
Bart Van Assche [Tue, 22 Oct 2024 18:16:17 +0000 (11:16 -0700)]
blk-mq: Make blk_mq_quiesce_tagset() hold the tag list mutex less long
Make sure that the tag_list_lock mutex is not held any longer than
necessary. This change reduces latency if e.g. blk_mq_quiesce_tagset()
is called concurrently from more than one thread. This function is used
by the NVMe core and also by the UFS driver.
Reported-by: Peter Wang <peter.wang@mediatek.com> Cc: Chao Leng <lengchao@huawei.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: stable@vger.kernel.org Fixes: 414dd48e882c ("blk-mq: add tagset quiesce interface") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20241022181617.2716173-1-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
Muchun Song [Mon, 21 Oct 2024 08:52:51 +0000 (16:52 +0800)]
block: remove redundant explicit memory barrier from rq_qos waiter and waker
The memory barriers in list_del_init_careful() and list_empty_careful()
in pairs already handle the proper ordering between data.got_token
and data.wq.entry. So remove the redundant explicit barriers. And also
change a "break" statement to "return" to avoid redundant calling of
finish_wait().
Li Lingfeng [Sat, 17 Aug 2024 07:11:08 +0000 (15:11 +0800)]
block: flush all throttled bios when deleting the cgroup
When a process migrates to another cgroup and the original cgroup is deleted,
the restrictions of throttled bios cannot be removed. If the restrictions
are set too low, it will take a long time to complete these bios.
Refer to the process of deleting a disk to remove the restrictions and
issue bios when deleting the cgroup.
This makes difference on the behavior of throttled bios:
Before: the limit of the throttled bios can't be changed and the bios will
complete under this limit;
Now: the limit will be canceled and the throttled bios will be flushed
immediately.
Muchun Song [Mon, 14 Oct 2024 09:29:34 +0000 (17:29 +0800)]
block: fix ordering between checking BLK_MQ_S_STOPPED request adding
Supposing first scenario with a virtio_blk driver.
CPU0 CPU1
blk_mq_try_issue_directly()
__blk_mq_issue_directly()
q->mq_ops->queue_rq()
virtio_queue_rq()
blk_mq_stop_hw_queue()
virtblk_done()
blk_mq_request_bypass_insert() 1) store
blk_mq_start_stopped_hw_queue()
clear_bit(BLK_MQ_S_STOPPED) 3) store
blk_mq_run_hw_queue()
if (!blk_mq_hctx_has_pending()) 4) load
return
blk_mq_sched_dispatch_requests()
blk_mq_run_hw_queue()
if (!blk_mq_hctx_has_pending())
return
blk_mq_sched_dispatch_requests()
if (blk_mq_hctx_stopped()) 2) load
return
__blk_mq_sched_dispatch_requests()
Supposing another scenario.
CPU0 CPU1
blk_mq_requeue_work()
blk_mq_insert_request() 1) store
virtblk_done()
blk_mq_start_stopped_hw_queue()
blk_mq_run_hw_queues() clear_bit(BLK_MQ_S_STOPPED) 3) store
blk_mq_run_hw_queue()
if (!blk_mq_hctx_has_pending()) 4) load
return
blk_mq_sched_dispatch_requests()
if (blk_mq_hctx_stopped()) 2) load
continue
blk_mq_run_hw_queue()
Both scenarios are similar, the full memory barrier should be inserted
between 1) and 2), as well as between 3) and 4) to make sure that either
CPU0 sees BLK_MQ_S_STOPPED is cleared or CPU1 sees dispatch list.
Otherwise, either CPU will not rerun the hardware queue causing
starvation of the request.
The easy way to fix it is to add the essential full memory barrier into
helper of blk_mq_hctx_stopped(). In order to not affect the fast path
(hardware queue is not stopped most of the time), we only insert the
barrier into the slow path. Actually, only slow path needs to care about
missing of dispatching the request to the low-level device driver.
Fixes: 320ae51feed5 ("blk-mq: new multi-queue block IO queueing mechanism") Cc: stable@vger.kernel.org Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20241014092934.53630-4-songmuchun@bytedance.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Muchun Song [Mon, 14 Oct 2024 09:29:33 +0000 (17:29 +0800)]
block: fix ordering between checking QUEUE_FLAG_QUIESCED request adding
Supposing the following scenario.
CPU0 CPU1
blk_mq_insert_request() 1) store
blk_mq_unquiesce_queue()
blk_queue_flag_clear() 3) store
blk_mq_run_hw_queues()
blk_mq_run_hw_queue()
if (!blk_mq_hctx_has_pending()) 4) load
return
blk_mq_run_hw_queue()
if (blk_queue_quiesced()) 2) load
return
blk_mq_sched_dispatch_requests()
The full memory barrier should be inserted between 1) and 2), as well as
between 3) and 4) to make sure that either CPU0 sees QUEUE_FLAG_QUIESCED
is cleared or CPU1 sees dispatch list or setting of bitmap of software
queue. Otherwise, either CPU will not rerun the hardware queue causing
starvation.
So the first solution is to 1) add a pair of memory barrier to fix the
problem, another solution is to 2) use hctx->queue->queue_lock to
synchronize QUEUE_FLAG_QUIESCED. Here, we chose 2) to fix it since
memory barrier is not easy to be maintained.
Fixes: f4560ffe8cec ("blk-mq: use QUEUE_FLAG_QUIESCED to quiesce queue") Cc: stable@vger.kernel.org Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20241014092934.53630-3-songmuchun@bytedance.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
After CPU0 has marked the queue as stopped, CPU1 will see the queue is
stopped. But before CPU1 puts the request on the dispatch list, CPU2
receives the interrupt of completion of request, so it will run the
hardware queue and marks the queue as non-stopped. Meanwhile, CPU1 also
runs the same hardware queue. After both CPU1 and CPU2 complete
blk_mq_run_hw_queue(), CPU1 just puts the request to the same hardware
queue and returns. It misses dispatching a request. Fix it by running
the hardware queue explicitly. And blk_mq_request_issue_directly()
should handle a similar situation. Fix it as well.
Fixes: d964f04a8fde ("blk-mq: fix direct issue") Cc: stable@vger.kernel.org Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20241014092934.53630-2-songmuchun@bytedance.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
The main purpose of this patch is cleanup.
The throtl_adjusted_limit function was removed after
commit bf20ab538c81 ("blk-throttle: remove
CONFIG_BLK_DEV_THROTTLING_LOW"), so the problem of not being
able to scale after setting bps or iops to 1 will not occur.
So revert this commit that bps/iops can be set to 1.
Julia Lawall [Sun, 13 Oct 2024 20:16:56 +0000 (22:16 +0200)]
block: replace call_rcu by kfree_rcu for simple kmem_cache_free callback
Since SLOB was removed and since
commit 6c6c47b063b5 ("mm, slab: call kvfree_rcu_barrier() from kmem_cache_destroy()"),
it is not necessary to use call_rcu when the callback only performs
kmem_cache_free. Use kfree_rcu() directly.
Greg Joyce [Thu, 29 Aug 2024 17:56:11 +0000 (12:56 -0500)]
block: sed-opal: add ioctl IOC_OPAL_SET_SID_PW
After a SED drive is provisioned, there is no way to change the SID
password via the ioctl() interface. A new ioctl IOC_OPAL_SET_SID_PW
will allow the password to be changed. The valid current password is
required.
Uday Shankar [Mon, 7 Oct 2024 18:24:17 +0000 (12:24 -0600)]
ublk: support device recovery without I/O queueing
ublk currently supports the following behaviors on ublk server exit:
A: outstanding I/Os get errors, subsequently issued I/Os get errors
B: outstanding I/Os get errors, subsequently issued I/Os queue
C: outstanding I/Os get reissued, subsequently issued I/Os queue
and the following behaviors for recovery of preexisting block devices by
a future incarnation of the ublk server:
1: ublk devices stopped on ublk server exit (no recovery possible)
2: ublk devices are recoverable using start/end_recovery commands
The userspace interface allows selection of combinations of these
behaviors using flags specified at device creation time, namely:
default behavior: A + 1
UBLK_F_USER_RECOVERY: B + 2
UBLK_F_USER_RECOVERY|UBLK_F_USER_RECOVERY_REISSUE: C + 2
The behavior A + 2 is currently unsupported. Add support for this
behavior under the new flag combination
UBLK_F_USER_RECOVERY|UBLK_F_USER_RECOVERY_FAIL_IO.
Uday Shankar [Mon, 7 Oct 2024 18:24:16 +0000 (12:24 -0600)]
ublk: merge stop_work and quiesce_work
Save some lines by merging stop_work and quiesce_work into nosrv_work,
which looks at the recovery flags and does the right thing when the "no
ublk server" condition is detected.
Uday Shankar [Mon, 7 Oct 2024 18:24:15 +0000 (12:24 -0600)]
ublk: refactor recovery configuration flag helpers
ublk currently supports the following behaviors on ublk server exit:
A: outstanding I/Os get errors, subsequently issued I/Os get errors
B: outstanding I/Os get errors, subsequently issued I/Os queue
C: outstanding I/Os get reissued, subsequently issued I/Os queue
and the following behaviors for recovery of preexisting block devices by
a future incarnation of the ublk server:
1: ublk devices stopped on ublk server exit (no recovery possible)
2: ublk devices are recoverable using start/end_recovery commands
The userspace interface allows selection of combinations of these
behaviors using flags specified at device creation time, namely:
default behavior: A + 1
UBLK_F_USER_RECOVERY: B + 2
UBLK_F_USER_RECOVERY|UBLK_F_USER_RECOVERY_REISSUE: C + 2
We can't easily change the userspace interface to allow independent
selection of one of {A, B, C} and one of {1, 2}, but we can refactor the
internal helpers which test for the flags. Replace the existing helpers
with the following set:
ublk_nosrv_should_reissue_outstanding: tests for behavior C
ublk_nosrv_[dev_]should_queue_io: tests for behavior B
ublk_nosrv_should_stop_dev: tests for behavior 1
Uday Shankar [Mon, 7 Oct 2024 18:24:14 +0000 (12:24 -0600)]
ublk: check recovery flags for validity
Setting UBLK_F_USER_RECOVERY_REISSUE without also setting
UBLK_F_USER_RECOVERY is currently silently equivalent to not setting any
recovery flags at all, even though that's obviously not intended. Check
for this case and fail add_dev (with a paranoid warning to aid debugging
any program which might rely on the old behavior) with EINVAL if it is
detected.
Keith Busch [Mon, 7 Oct 2024 15:32:35 +0000 (08:32 -0700)]
block: enable passthrough command statistics
Applications using the passthrough interfaces for IO want to continue
seeing the disk stats. These requests had been fenced off from this
block layer feature. While the block layer doesn't necessarily know what
a passthrough command does, we do know the data size and direction,
which is enough to account for the command's stats.
Since tracking these has the potential to produce unexpected results,
the passthrough stats are locked behind a new queue flag that needs to
be enabled with the /sys/block/<dev>/queue/iostats_passthrough
attribute.
Christoph Hellwig [Tue, 8 Oct 2024 05:08:41 +0000 (07:08 +0200)]
block: return void from the queue_sysfs_entry load_module method
Requesting a module either succeeds or does nothing, return an error from
this method does not make sense.
Also move the load_module after the store method in the struct
declaration to keep the important show and store methods together.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org> Link: https://lore.kernel.org/r/20241008050841.104602-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
Konstantin Khlebnikov [Sat, 5 Oct 2024 00:13:43 +0000 (17:13 -0700)]
block: add partition uuid into uevent as "PARTUUID"
Both most common formats have uuid in addition to partition name:
GPT: standard uuid xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
DOS: 4 byte disk signature and 1 byte partition xxxxxxxx-xx
Tools from util-linux use the same notation for them.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Kyle Fortin <kyle.fortin@oracle.com>
[dianders: rebased to modern kernels] Signed-off-by: Douglas Anderson <dianders@google.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20241004171340.v2.1.I938c91d10e454e841fdf5d64499a8ae8514dc004@changeid Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Sun, 6 Oct 2024 22:52:33 +0000 (16:52 -0600)]
block: move issue side time stamping to blk_account_io_start()
It's known needed at that point, and it's cleaner to just assign it
there rather than rely on it being reliably set before hitting the
IO accounting. Hence, move it out of blk_mq_rq_time_init(), which is
now only doing the allocation side timing.
While at it, get rid of the '0' time passing to blk_mq_rq_time_init(),
just pass in blk_time_get_ns() for the two cases where 0 is being
explicitly passed in. The rest pass in the previously cached allocation
time.
Jens Axboe [Sun, 6 Oct 2024 21:11:24 +0000 (15:11 -0600)]
block: set issue time stamp based on queue state
A previous commit moved RQF_IO_STAT into blk_account_io_done(), where
it's being set rather than at allocation time. Unfortunately we do check
for that flag in blk_mq_rq_time_init(), and hence setting the
start_time_ns wasn't being done. This lead to unwieldy inflight IO counts
and times, as IO completion accounting would a 0 value rather than the
issue time for it's subtraction math.
Fix this by switching the blk_mq_rq_time_init() check to use the queue
state rather than the request state.
Fixes: b8f762400ae8 ("block: move iostat check into blk_acount_io_start()") Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202410062110.512391df-oliver.sang@intel.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christian Marangi [Wed, 2 Oct 2024 22:11:46 +0000 (00:11 +0200)]
dt-bindings: mmc: Document support for partition table in mmc-card
Document support for defining a partition table in the mmc-card node.
This is needed if the eMMC doesn't have a partition table written and
the bootloader of the device load data by using absolute offset of the
block device. This is common on embedded device that have eMMC installed
to save space and have non removable block devices.
If an OF partition table is detected, any partition table written in the
eMMC will be ignored and won't be parsed.
eMMC provide a generic disk for user data and if supported (JEDEC 4.4+)
also provide two additional disk ("boot1" and "boot2") for special usage
of boot operation where normally is stored the bootloader or boot info.
New JEDEC version also supports up to 4 GP partition for other usage
called "gp1", "gp2", "gp3", "gp4".
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20241002221306.4403-7-ansuelsmth@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christian Marangi [Wed, 2 Oct 2024 22:11:45 +0000 (00:11 +0200)]
block: add support for partition table defined in OF
Add support for partition table defined in Device Tree. Similar to how
it's done with MTD, add support for defining a fixed partition table in
device tree.
A common scenario for this is fixed block (eMMC) embedded devices that
have no MBR or GPT partition table to save storage space. Bootloader
access the block device with absolute address of data.
This is to complete the functionality with an equivalent implementation
with providing partition table with bootargs, for case where the booargs
can't be modified and tweaking the Device Tree is the only solution to
have an usabe partition table.
The implementation follow the fixed-partitions parser used on MTD
devices where a "partitions" node is expected to be declared with
"fixed-partitions" compatible in the OF node of the disk device
(mmc-card for eMMC for example) and each child node declare a label
and a reg with offset and size. If label is not declared, the node name
is used as fallback. Eventually is also possible to declare the read-only
property to flag the partition as read-only.
Christian Marangi [Wed, 2 Oct 2024 22:11:44 +0000 (00:11 +0200)]
mmc: block: attach partitions fwnode if found in mmc-card
Attach partitions fwnode if found in mmc-card and register disk with it.
This permits block partition to reference the node and register a
partition table defined in DT for the special case for embedded device
that doesn't have a partition table flashed but have an hardcoded
partition table passed from the system.
JEDEC BOOT partition boot0/boot1 are supported but in DT we refer with
the JEDEC name of boot1 and boot2 to better adhere to documentation.
Also JEDEC GP partition gp0/1/2/3 are supported but in DT we refer with
the JEDEC name of gp1/2/3/4 to better adhere to documentration.
Christian Marangi [Wed, 2 Oct 2024 22:11:43 +0000 (00:11 +0200)]
block: introduce add_disk_fwnode()
Introduce add_disk_fwnode() as a replacement of device_add_disk() that
permits to pass and attach a fwnode to disk dev.
This variant can be useful for eMMC that might have the partition table
for the disk defined in DT. A parser can later make use of the attached
fwnode to parse the related table and init the hardcoded partition for
the disk.
device_add_disk() is converted to a simple wrapper of add_disk_fwnode()
with the fwnode entry set as NULL.
Christian Marangi [Wed, 2 Oct 2024 22:11:41 +0000 (00:11 +0200)]
block: add support for defining read-only partitions
Add support for defining read-only partitions and complete support for
it in the cmdline partition parser as the additional "ro" after a
partition is scanned but never actually applied.
Jens Axboe [Thu, 3 Oct 2024 13:26:12 +0000 (07:26 -0600)]
block: remove 'req->part' check for stats accounting
If RQF_IO_STAT is set, then accounting is enabled. There's no need to
further gate this on req->part being set or not, RQF_IO_STAT should
never be set if accounting is not being done for this request.
Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Wed, 2 Oct 2024 19:19:48 +0000 (13:19 -0600)]
block: move iostat check into blk_acount_io_start()
Rather than have blk_do_io_stat() check for both RQF_IO_STAT and whether
the request is a passthrough requests every time, move both of those
checks into blk_account_io_start(). Then blk_do_io_stat() can be reduced
to just checking for RQF_IO_STAT.
Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Anuj Gupta <anuj20.g@samsung.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Sun, 20 Oct 2024 21:08:17 +0000 (14:08 -0700)]
Merge tag 'for-net-2024-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Pull bluetooth fixes from Luiz Augusto Von Dentz:
- ISO: Fix multiple init when debugfs is disabled
- Call iso_exit() on module unload
- Remove debugfs directory on module init failure
- btusb: Fix not being able to reconnect after suspend
- btusb: Fix regression with fake CSR controllers 0a12:0001
- bnep: fix wild-memory-access in proto_unregister
Note: normally the bluetooth fixes go through the networking tree, but
this missed the weekly merge, and two of the commits fix regressions
that have caused a fair amount of noise and have now hit stable too:
So I'm pulling it directly just to expedite things and not miss yet
another -rc release. This is not meant to become a new pattern.
* tag 'for-net-2024-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: btusb: Fix regression with fake CSR controllers 0a12:0001
Bluetooth: bnep: fix wild-memory-access in proto_unregister
Bluetooth: btusb: Fix not being able to reconnect after suspend
Bluetooth: Remove debugfs directory on module init failure
Bluetooth: Call iso_exit() on module unload
Bluetooth: ISO: Fix multiple init when debugfs is disabled
Linus Torvalds [Sun, 20 Oct 2024 20:55:46 +0000 (13:55 -0700)]
Merge tag 'pinctrl-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Mostly error path fixes, but one pretty serious interrupt problem in
the Ocelot driver as well:
- Fix two error paths and a missing semicolon in the Intel driver
- Add a missing ACPI ID for the Intel Panther Lake
- Check return value of devm_kasprintf() in the Apple and STM32
drivers
- Add a missing mutex_destroy() in the aw9523 driver
- Fix a double free in cv1800_pctrl_dt_node_to_map() in the Sophgo
driver
- Fix a double free in ma35_pinctrl_dt_node_to_map_func() in the
Nuvoton driver
- Fix a bug in the Ocelot interrupt handler making the system hang"
* tag 'pinctrl-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: ocelot: fix system hang on level based interrupts
pinctrl: nuvoton: fix a double free in ma35_pinctrl_dt_node_to_map_func()
pinctrl: sophgo: fix double free in cv1800_pctrl_dt_node_to_map()
pinctrl: intel: platform: Add Panther Lake to the list of supported
pinctrl: aw9523: add missing mutex_destroy
pinctrl: stm32: check devm_kasprintf() returned value
pinctrl: apple: check devm_kasprintf() returned value
pinctrl: intel: platform: use semicolon instead of comma in ncommunities assignment
pinctrl: intel: platform: fix error path in device_for_each_child_node()
Linus Torvalds [Sun, 20 Oct 2024 20:10:44 +0000 (13:10 -0700)]
Merge tag 'char-misc-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull misc driver fixes from Greg KH:
"Here are a number of small char/misc/iio driver fixes for 6.12-rc4:
- loads of small iio driver fixes for reported problems
- parport driver out-of-bounds fix
- Kconfig description and MAINTAINERS file updates
All of these, except for the Kconfig and MAINTAINERS file updates have
been in linux-next all week. Those other two are just documentation
changes and will have no runtime issues and were merged on Friday"
* tag 'char-misc-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (39 commits)
misc: rtsx: list supported models in Kconfig help
MAINTAINERS: Remove some entries due to various compliance requirements.
misc: microchip: pci1xxxx: add support for NVMEM_DEVID_AUTO for OTP device
misc: microchip: pci1xxxx: add support for NVMEM_DEVID_AUTO for EEPROM device
parport: Proper fix for array out-of-bounds access
iio: frequency: admv4420: fix missing select REMAP_SPI in Kconfig
iio: frequency: {admv4420,adrf6780}: format Kconfig entries
iio: adc: ad4695: Add missing Kconfig select
iio: adc: ti-ads8688: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: hid-sensors: Fix an error handling path in _hid_sensor_set_report_latency()
iioc: dac: ltc2664: Fix span variable usage in ltc2664_channel_config()
iio: dac: stm32-dac-core: add missing select REGMAP_MMIO in Kconfig
iio: dac: ltc1660: add missing select REGMAP_SPI in Kconfig
iio: dac: ad5770r: add missing select REGMAP_SPI in Kconfig
iio: amplifiers: ada4250: add missing select REGMAP_SPI in Kconfig
iio: frequency: adf4377: add missing select REMAP_SPI in Kconfig
iio: resolver: ad2s1210: add missing select (TRIGGERED_)BUFFER in Kconfig
iio: resolver: ad2s1210 add missing select REGMAP in Kconfig
iio: proximity: mb1232: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: pressure: bm1390: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
...
Linus Torvalds [Sun, 20 Oct 2024 19:57:53 +0000 (12:57 -0700)]
Merge tag 'usb-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.12-rc4:
- xhci driver fixes for a number of reported issues
- new usb-serial driver ids
- dwc3 driver fixes for reported problems.
- usb gadget driver fixes for reported problems
- typec driver fixes
- MAINTAINER file updates
All of these have been in linux-next this week with no reported issues"
* tag 'usb-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Telit FN920C04 MBIM compositions
USB: serial: option: add support for Quectel EG916Q-GL
xhci: dbc: honor usb transfer size boundaries.
usb: xhci: Fix handling errors mid TD followed by other errors
xhci: Mitigate failed set dequeue pointer commands
xhci: Fix incorrect stream context type macro
USB: gadget: dummy-hcd: Fix "task hung" problem
usb: gadget: f_uac2: fix return value for UAC2_ATTRIBUTE_STRING store
usb: dwc3: core: Fix system suspend on TI AM62 platforms
xhci: tegra: fix checked USB2 port number
usb: dwc3: Wait for EndXfer completion before restoring GUSB2PHYCFG
usb: typec: qcom-pmic-typec: fix sink status being overwritten with RP_DEF
usb: typec: altmode should keep reference to parent
MAINTAINERS: usb: raw-gadget: add bug tracker link
MAINTAINERS: Add an entry for the LJCA drivers
Linus Torvalds [Sun, 20 Oct 2024 19:04:32 +0000 (12:04 -0700)]
Merge tag 'x86_urgent_for_v6.12_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Explicitly disable the TSC deadline timer when going idle to address
some CPU errata in that area
- Do not apply the Zenbleed fix on anything else except AMD Zen2 on the
late microcode loading path
- Clear CPU buffers later in the NMI exit path on 32-bit to avoid
register clearing while they still contain sensitive data, for the
RDFS mitigation
- Do not clobber EFLAGS.ZF with VERW on the opportunistic SYSRET exit
path on 32-bit
- Fix parsing issues of memory bandwidth specification in sysfs for
resctrl's memory bandwidth allocation feature
- Other small cleanups and improvements
* tag 'x86_urgent_for_v6.12_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Always explicitly disarm TSC-deadline timer
x86/CPU/AMD: Only apply Zenbleed fix for Zen2 during late microcode load
x86/bugs: Use code segment selector for VERW operand
x86/entry_32: Clear CPU buffers after register restore in NMI return
x86/entry_32: Do not clobber user EFLAGS.ZF
x86/resctrl: Annotate get_mem_config() functions as __init
x86/resctrl: Avoid overflow in MB settings in bw_validate()
x86/amd_nb: Add new PCI ID for AMD family 1Ah model 20h
Linus Torvalds [Sun, 20 Oct 2024 18:30:56 +0000 (11:30 -0700)]
Merge tag 'sched_urgent_for_v6.12_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduling fixes from Borislav Petkov:
- Add PREEMPT_RT maintainers
- Fix another aspect of delayed dequeued tasks wrt determining their
state, i.e., whether they're runnable or blocked
- Handle delayed dequeued tasks and their migration wrt PSI properly
- Fix the situation where a delayed dequeue task gets enqueued into a
new class, which should not happen
- Fix a case where memory allocation would happen while the runqueue
lock is held, which is a no-no
- Do not over-schedule when tasks with shorter slices preempt the
currently running task
- Make sure delayed to deque entities are properly handled before
unthrottling
- Other smaller cleanups and improvements
* tag 'sched_urgent_for_v6.12_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Add an entry for PREEMPT_RT.
sched/fair: Fix external p->on_rq users
sched/psi: Fix mistaken CPU pressure indication after corrupted task state bug
sched/core: Dequeue PSI signals for blocked tasks that are delayed
sched: Fix delayed_dequeue vs switched_from_fair()
sched/core: Disable page allocation in task_tick_mm_cid()
sched/deadline: Use hrtick_enabled_dl() before start_hrtick_dl()
sched/eevdf: Fix wakeup-preempt by checking cfs_rq->nr_running
sched: Fix sched_delayed vs cfs_bandwidth
Linus Torvalds [Sun, 20 Oct 2024 00:04:52 +0000 (17:04 -0700)]
Merge tag 'io_uring-6.12-20241019' of git://git.kernel.dk/linux
Pull one more io_uring fix from Jens Axboe:
"Fix for a regression introduced in 6.12-rc2, where a condition check
was negated and hence -EAGAIN would bubble back up up to userspace
rather than trigger a retry condition"
* tag 'io_uring-6.12-20241019' of git://git.kernel.dk/linux:
io_uring/rw: fix wrong NOWAIT check in io_rw_init_file()
John Garry [Sat, 19 Oct 2024 12:51:08 +0000 (12:51 +0000)]
block: Add bdev atomic write limits helpers
Add helpers to get atomic write limits for a bdev, so that we don't access
request_queue helpers outside the block layer.
We check if the bdev can actually atomic write in these helpers, so we
can avoid users missing using this check.
Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20241019125113.369994-4-john.g.garry@oracle.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
John Garry [Sat, 19 Oct 2024 12:51:07 +0000 (12:51 +0000)]
fs/block: Check for IOCB_DIRECT in generic_atomic_write_valid()
Currently FMODE_CAN_ATOMIC_WRITE is set if the bdev can atomic write and
the file is open for direct IO. This does not work if the file is not
opened for direct IO, yet fcntl(O_DIRECT) is used on the fd later.
Change to check for direct IO on a per-IO basis in
generic_atomic_write_valid(). Since we want to report -EOPNOTSUPP for
non-direct IO for an atomic write, change to return an error code.
Relocate the block fops atomic write checks to the common write path, as to
catch non-direct IO.
Fixes: c34fc6f26ab8 ("fs: Initial atomic write support") Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20241019125113.369994-3-john.g.garry@oracle.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
John Garry [Sat, 19 Oct 2024 12:51:06 +0000 (12:51 +0000)]
block/fs: Pass an iocb to generic_atomic_write_valid()
Darrick and Hannes both thought it better that generic_atomic_write_valid()
should be passed a struct iocb, and not just the member of that struct
which is referenced; see [0] and [1].
I think that makes a more generic and clean API, so make that change.
Fixes: c34fc6f26ab8 ("fs: Initial atomic write support") Suggested-by: Darrick J. Wong <djwong@kernel.org> Suggested-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20241019125113.369994-2-john.g.garry@oracle.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Sat, 19 Oct 2024 19:52:19 +0000 (12:52 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Fixes all in drivers. The largest is the mpi3mr which corrects a phy
count limit that should only apply to the controller but was being
incorrectly applied to expander phys"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: core: Fix null-ptr-deref in target_alloc_device()
scsi: mpi3mr: Validate SAS port assignments
scsi: ufs: core: Set SDEV_OFFLINE when UFS is shut down
scsi: ufs: core: Requeue aborted request
scsi: ufs: core: Fix the issue of ICU failure
Linus Torvalds [Sat, 19 Oct 2024 19:42:14 +0000 (12:42 -0700)]
Merge tag 'ftrace-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace fixes from Steven Rostedt:
"A couple of fixes to function graph infrastructure:
- Fix allocation of idle shadow stack allocation during hotplug
If function graph tracing is started when a CPU is offline, if it
were come online during the trace then the idle task that
represents the CPU will not get a shadow stack allocated for it.
This means all function graph hooks that happen while that idle
task is running (including in interrupt mode) will have all its
events dropped.
Switch over to the CPU hotplug mechanism that will have any newly
brought on line CPU get a callback that can allocate the shadow
stack for its idle task.
- Fix allocation size of the ret_stack_list array
When function graph tracing converted over to allowing more than
one user at a time, it had to convert its shadow stack from an
array of ret_stack structures to an array of unsigned longs. The
shadow stacks are allocated in batches of 32 at a time and assigned
to every running task. The batch is held by the ret_stack_list
array.
But when the conversion happened, instead of allocating an array of
32 pointers, it was allocated as a ret_stack itself (PAGE_SIZE).
This ret_stack_list gets passed to a function that iterates over
what it believes is its size defined by the
FTRACE_RETSTACK_ALLOC_SIZE macro (which is 32).
Luckily (PAGE_SIZE) is greater than 32 * sizeof(long), otherwise
this would have been an array overflow. This still should be fixed
and the ret_stack_list should be allocated to the size it is
expected to be as someday it may end up being bigger than
SHADOW_STACK_SIZE"
* tag 'ftrace-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fgraph: Allocate ret_stack_list with proper size
fgraph: Use CPU hotplug mechanism to initialize idle shadow stacks
Linus Torvalds [Sat, 19 Oct 2024 18:48:14 +0000 (11:48 -0700)]
Merge tag 'ipe-pr-20241018' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe
Pull ipe fixes from Fan Wu:
"This addresses several issues identified by Luca when attempting to
enable IPE on Debian and systemd:
- address issues with IPE policy update errors and policy update
version check, improving the clarity of error messages for better
understanding by userspace programs.
- enable IPE policies to be signed by secondary and platform
keyrings, facilitating broader use across general Linux
distributions like Debian.
- updates the IPE entry in the MAINTAINERS file to reflect the new
tree URL and my updated email from kernel.org"
* tag 'ipe-pr-20241018' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe:
MAINTAINERS: update IPE tree url and Fan Wu's email
ipe: fallback to platform keyring also if key in trusted keyring is rejected
ipe: allow secondary and platform keyrings to install/update policies
ipe: also reject policy updates with the same version
ipe: return -ESTALE instead of -EINVAL on update when new policy has a lower version
Linus Torvalds [Sat, 19 Oct 2024 17:18:03 +0000 (10:18 -0700)]
Merge tag 'input-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a fix for Zinitix driver to not fail probing if the property enabling
touch keys functionality is not defined. Support for touch keys was
added in 6.12 merge window so this issue does not affect users of
released kernels
- a couple new vendor/device IDs in xpad driver to enable support for
more hardware
* tag 'input-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: zinitix - don't fail if linux,keycodes prop is absent
Input: xpad - add support for MSI Claw A1M
Input: xpad - add support for 8BitDo Ultimate 2C Wireless Controller
Linus Torvalds [Sat, 19 Oct 2024 15:44:10 +0000 (08:44 -0700)]
Merge tag '9p-for-6.12-rc4' of https://github.com/martinetd/linux
Pull 9p fixes from Dominique Martinet:
"Mashed-up update that I sat on too long:
- fix for multiple slabs created with the same name
- enable multipage folios
- theorical fix to also look for opened fids by inode if none was
found by dentry"
[ Enabling multi-page folios should have been done during the merge
window, but it's a one-liner, and the actual meat of the enablement
is in netfs and already in use for other filesystems... - Linus ]
* tag '9p-for-6.12-rc4' of https://github.com/martinetd/linux:
9p: Avoid creating multiple slab caches with the same name
9p: Enable multipage folios
9p: v9fs_fid_find: also lookup by inode if not found dentry
Linus Torvalds [Sat, 19 Oct 2024 15:32:47 +0000 (08:32 -0700)]
Merge tag 'rust-fixes-6.12-2' of https://github.com/Rust-for-Linux/linux
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Fix several issues with the 'rustc-option' macro. It includes a
refactor from Masahiro of three '{cc,rust}-*' macros, which is not
a fix but avoids repeating the same commands (which would be
several lines in the case of 'rustc-option').
- Fix conditions for 'CONFIG_HAVE_CFI_ICALL_NORMALIZE_INTEGERS'. It
includes the addition of 'CONFIG_RUSTC_LLVM_VERSION', which is not
a fix but is needed for the actual fix.
And a trivial grammar fix"
* tag 'rust-fixes-6.12-2' of https://github.com/Rust-for-Linux/linux:
cfi: fix conditions for HAVE_CFI_ICALL_NORMALIZE_INTEGERS
kbuild: rust: add `CONFIG_RUSTC_LLVM_VERSION`
kbuild: fix issues with rustc-option
kbuild: refactor cc-option-yn, cc-disable-warning, rust-option-yn macros
lib/Kconfig.debug: fix grammar in RUST_BUILD_ASSERT_ALLOW
projects / users / dwmw2 / linux.git / log