Ofir Bitton [Tue, 12 Jan 2021 16:37:19 +0000 (18:37 +0200)]
habanalabs: wait for interrupt support
In order to support command submissions from user space, the driver
need to add support for user interrupt completions. The driver will
allow multiple user threads to wait for an interrupt and perform
a comparison with a given user address once interrupt expires.
Ofir Bitton [Tue, 12 Jan 2021 12:43:09 +0000 (14:43 +0200)]
habanalabs: enable all IRQs for user interrupt support
In order to support user interrupts, driver must enable all MSI-X
interrupts for any case user will trigger them. We differentiate
between a valid user interrupt and a non valid one.
Ohad Sharabi [Mon, 8 Feb 2021 12:53:56 +0000 (14:53 +0200)]
habanalabs: reset device in case of sync error
As the F/wW is the first to detect out of sync event, a new event is
added to notify the driver on such event. In which case the driver
performs hard reset.
Oded Gabbay [Tue, 16 Feb 2021 20:46:17 +0000 (22:46 +0200)]
habanalabs: fail reset if device is not idle
After any reset (soft or hard) the device (the engines/QMANs) should
be idle. If they are not idle, fail the reset. If it is soft-reset,
the driver will try to do hard-reset automatically. If it is hard-reset,
the driver will make the device non-operational.
Oded Gabbay [Tue, 16 Feb 2021 20:34:24 +0000 (22:34 +0200)]
habanalabs: reset after device is actually released
The device is actually released only after the refcnt of the hpriv
structure is 0, which means all its contexts were closed.
If we reset the device while a context is still open, there are
possibilities for unexpected behavior and crashes. For example, if the
process has a mapping of a register block that is now currently being
reset, and the process writes/reads to that block during the reset,
the device can get stuck.
Ofir Bitton [Wed, 10 Feb 2021 12:29:33 +0000 (14:29 +0200)]
habanalabs: add reset support when user closes FD
In order to support command submissions that are done directly from
user space, the driver must perform soft reset once user closes its FD.
In case the soft reset fails or device is not idle, a hard reset should
be performed.
Merge tag 'extcon-next-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next
Chanwoo writes:
Update extcon next for v5.13
Detailed description for this pull request:
1. Update extcon provider driver
- Add the support of charging interrupt to detect charger connector
for extcon-max8997.c
- Detect OTG when USB_ID pin is connected to ground for extcon-sm5502.c
- Add the support for VBUS detection for extcon-qcom-spmi-misc.c
and replace qcom,pm8941-misc binding document with yaml style.
* tag 'extcon-next-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
extcon: qcom-spmi: Add support for VBUS detection
bindings: pm8941-misc: Add support for VBUS detection
bindings: pm8941-misc: Convert bindings to YAML
extcon: sm5502: Detect OTG when USB_ID is connected to ground
extcon: max8997: Add CHGINS and CHGRM interrupt handling
Merge tag 'fpga-late-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next
Moritz writes:
Second set of FPGA Manager changes for 5.13-rc1
FPGA Manager:
- Russ' first change improves port_enable reliability
- Russ' second change adds a new device ID for a DFL device
- Geert's change updates the examples in binding with dt overlay sugar
syntax
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of my for-next branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
* tag 'fpga-late-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
fpga: dfl: pci: add DID for D5005 PAC cards
dt-bindings: fpga: fpga-region: Convert to sugar syntax
fpga: dfl: afu: harden port enable logic
fpga: Add support for Xilinx DFX AXI Shutdown manager
dt-bindings: fpga: Add compatible value for Xilinx DFX AXI shutdown manager
fpga: xilinx-pr-decoupler: Simplify code by using dev_err_probe()
fpga: fpga-mgr: xilinx-spi: fix error messages on -EPROBE_DEFER
Guru Das Srinagesh [Tue, 26 Jan 2021 00:38:30 +0000 (16:38 -0800)]
bindings: pm8941-misc: Convert bindings to YAML
Convert bindings from txt to YAML.
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Nikita Travkin [Tue, 19 Jan 2021 13:33:47 +0000 (18:33 +0500)]
extcon: sm5502: Detect OTG when USB_ID is connected to ground
In it's curent state this driver ignores OTG adapters with ID pin
connected to ground. This commit adds a check to set extcon into
host mode when such OTG adapter is connected.
Merge tag 'phy-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next
Vinod writes:
phy-for-5.13
- Updates:
- Yaml conversion for mvebu-utmi binding, bcm-ns-usb2 and
bcm-ns-usb3 bindings
- Mediatek dsi and hdmi phy updates
- TI j721e-wiz updates for AM64
- Cadence-torrent phy updates for SGMII/QSGMII
- New support:
- usb3-dp phy for Qualcomm SM8250
- UTMI phy for Armada CP110
- USB phy for Qualcomm SC7280
- Binding and driver for Sparx5 ethernet serdes
* tag 'phy-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (75 commits)
phy: fix resource_size.cocci warnings
phy: Sparx5 Eth SerDes: Use direct register operations
phy: hisilicon: Use the correct HiSilicon copyright
phy: marvell: phy-mvebu-cp11i-utmi needs USB_COMMON
phy: qcom-qmp: add support for sm8250-usb3-dp phy
phy: qcom-qmp: rename common registers
phy: qcom-qmp: move DP functions to callbacks
dt-bindings: phy: qcom,qmp-usb3-dp: Add support for SM8250
dt-bindings: phy: qcom,qmp-usb3-dp-phy: move usb3 compatibles back to qcom,qmp-phy.yaml
phy: ti: j721e-wiz: Configure 'p_standard_mode' only for DP/QSGMII
dt-bindings: phy: fix dt_binding_check warning in mediatek, ufs-phy.yaml
phy: zynqmp: Handle the clock enable/disable properly
dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml
dt-bindings: phy: bcm-ns-usb2-phy: convert to yaml
phy: microchip: PHY_SPARX5_SERDES should depend on ARCH_SPARX5
phy: cadence-torrent: Add delay for PIPE clock to be stable
phy: cadence-torrent: Explicitly request exclusive reset control
phy: cadence-torrent: Do not configure SERDES if it's already configured
phy: cadence-torrent: Group reset APIs and clock APIs
phy: ti: j721e-wiz: Do not configure wiz if its already configured
...
Merge tag 'soundwire-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next
Vinod writes:
soundwire updates for 5.13-rc1
Updates for v5.13-rc1 are:
Core:
- Ability to add quirks for masters
- static checker cleanup for bus code
Drivers:
- DMI quirks for Intel controllers
- static checker cleanup for drivers
- add auto enumeration support qcom controller
* tag 'soundwire-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (45 commits)
soundwire: intel_init: test link->cdns
soundwire: qcom: handle return correctly in qcom_swrm_transport_params
soundwire: qcom: cleanup internal port config indexing
soundwire: qcom: wait for fifo space to be available before read/write
soundwire: qcom: add static port map support
soundwire: qcom: update port map allocation bit mask
soundwire: add static port mapping support
soundwire: stream: fix memory leak in stream config error path
soundwire: qcom: use signed variable for error return
soundwire: qcom: wait for enumeration to be complete in probe
soundwire: qcom: add auto enumeration support
soundwire: export sdw_compare_devid, sdw_extract_slave_id and sdw_slave_add
soundwire: qcom: add support to new interrupts
soundwire: qcom: update register read/write routine
soundwire: qcom: start the clock during initialization
soundwire: qcom: set continue execution flag for ignored commands
soundwire: qcom: add support to missing transport params
dt-bindings: soundwire: qcom: clarify data port bus parameters
soundwire: cadence: only prepare attached devices on clock stop
soundwire: generic_allocation: fix confusion between group and packing
...
When USB and USB_COMMON are not enabled, phy-mvebu-cp110-utmi
suffers a build error due to a missing interface that is provided
by CONFIG_USB_COMMON, so make the driver depend on USB_COMMON.
ld: drivers/phy/marvell/phy-mvebu-cp110-utmi.o: in function `mvebu_cp110_utmi_phy_probe':
phy-mvebu-cp110-utmi.c:(.text+0x152): undefined reference to `of_usb_get_dr_mode_by_phy'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: linux-phy@lists.infradead.org Link: https://lore.kernel.org/r/20210401210045.23525-1-rdunlap@infradead.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
intel_link_probe() could return error and dev_get_drvdata() will return
null in such case. So we have to test link->cdns after
link->cdns = dev_get_drvdata(&ldev->auxdev.dev);
Otherwise, we will meet the "kernel NULL pointer dereference" error.
soundwire: qcom: cleanup internal port config indexing
Internally used portconfig array for storing port bandwidth
params starts from offset zero. However port zero is not really
used and we also copy the bus parameters to offset zero.
So basically we endup with a code which has to subtract 1 from port
number to get to port parameters.
This is bit confusing to the reader so, make this bit more obvious by only
copying the parameters to offset 1 instead of zero. This will avoid doing
-1 every time when we try to get port params.
Similar thing has been recently done with din/dout_port_mask.
Srinivas Kandagatla [Mon, 15 Mar 2021 16:56:48 +0000 (16:56 +0000)]
soundwire: qcom: add static port map support
SoundWire device ports are statically mapped to Controller ports during
design. Add support to read these from SoundWire devices.
This controller uses static port map info to setup bandwidth
parameters for those ports.
A generic port allocation is not possible in this cases!
Srinivas Kandagatla [Mon, 15 Mar 2021 16:56:47 +0000 (16:56 +0000)]
soundwire: qcom: update port map allocation bit mask
currently the internal bitmask used for allocating ports starts with offset 0.
This is bit confusing as data port numbers on Qualcomm controller are valid
from 1 to 14. So adjust this bit mask accordingly, this will also help while
adding static port map support.
Srinivas Kandagatla [Mon, 15 Mar 2021 16:56:46 +0000 (16:56 +0000)]
soundwire: add static port mapping support
Some of the SoundWire device ports are statically mapped to Controller
ports during design, however there is no way to expose this information
to the controller. Controllers like Qualcomm ones use this info to setup
static bandwidth parameters for those ports.
A generic port allocation is not possible in this cases!
So this patch adds a new member m_port_map to struct sdw_slave to expose
this static map.
Rander Wang [Wed, 31 Mar 2021 00:46:10 +0000 (08:46 +0800)]
soundwire: stream: fix memory leak in stream config error path
When stream config is failed, master runtime will release all
slave runtime in the slave_rt_list, but slave runtime is not
added to the list at this time. This patch frees slave runtime
in the config error path to fix the memory leak.
Fixes: 89e590535f32 ("soundwire: Add support for SoundWire stream management") Signed-off-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Keyon Jie <yang.jie@intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210331004610.12242-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
Gustavo Pimentel [Mon, 29 Mar 2021 11:17:47 +0000 (13:17 +0200)]
MAINTAINERS: Add Synopsys xData IP driver maintainer
Add Synopsys xData IP driver maintainer.
This driver aims to support Synopsys xData IP and is normally distributed
along with Synopsys PCIe EndPoint IP as a PCIe traffic generator (depends
of the use and licensing agreement).
KMSAN complains that the vmci_use_ppn64() == false path in
vmci_dbell_register_notification_bitmap() left upper 32bits of
bitmap_set_msg.bitmap_ppn64 member uninitialized.
Local variable ----bitmap_set_msg@vmci_dbell_register_notification_bitmap created at:
vmci_dbell_register_notification_bitmap+0x50/0x1e0
vmci_dbell_register_notification_bitmap+0x50/0x1e0
Bytes 28-31 of 32 are uninitialized
Memory access of size 32 starts at ffff88810098f570
=====================================================
Zheyu Ma [Sat, 3 Apr 2021 06:58:36 +0000 (06:58 +0000)]
firewire: nosy: Fix a use-after-free bug in nosy_ioctl()
For each device, the nosy driver allocates a pcilynx structure.
A use-after-free might happen in the following scenario:
1. Open nosy device for the first time and call ioctl with command
NOSY_IOC_START, then a new client A will be malloced and added to
doubly linked list.
2. Open nosy device for the second time and call ioctl with command
NOSY_IOC_START, then a new client B will be malloced and added to
doubly linked list.
3. Call ioctl with command NOSY_IOC_START for client A, then client A
will be readded to the doubly linked list. Now the doubly linked
list is messed up.
4. Close the first nosy device and nosy_release will be called. In
nosy_release, client A will be unlinked and freed.
5. Close the second nosy device, and client A will be referenced,
resulting in UAF.
The root cause of this bug is that the element in the doubly linked list
is reentered into the list.
Fix this bug by adding a check before inserting a client. If a client
is already in the linked list, don't insert it.
The following KASAN report reveals it:
BUG: KASAN: use-after-free in nosy_release+0x1ea/0x210
Write of size 8 at addr ffff888102ad7360 by task poc
CPU: 3 PID: 337 Comm: poc Not tainted 5.12.0-rc5+ #6
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Call Trace:
nosy_release+0x1ea/0x210
__fput+0x1e2/0x840
task_work_run+0xe8/0x180
exit_to_user_mode_prepare+0x114/0x120
syscall_exit_to_user_mode+0x1d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
The buggy address belongs to the object at ffff888102ad7300 which belongs to the cache kmalloc-128 of size 128
The buggy address is located 96 bytes inside of 128-byte region [ffff888102ad7300, ffff888102ad7380)
[ Modified to use 'list_empty()' inside proper lock - Linus ]
Merge tag 'io_uring-5.12-2021-04-03' of git://git.kernel.dk/linux-block
POull io_uring fix from Jens Axboe:
"Just fixing a silly braino in a previous patch, where we'd end up
failing to compile if CONFIG_BLOCK isn't enabled.
Not that a lot of people do that, but kernel bot spotted it and it's
probably prudent to just flush this out now before -rc6.
Sorry about that, none of my test compile configs have !CONFIG_BLOCK"
* tag 'io_uring-5.12-2021-04-03' of git://git.kernel.dk/linux-block:
io_uring: fix !CONFIG_BLOCK compilation failure
Merge tag 'gfs2-v5.12-rc2-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
"Two more gfs2 fixes"
* tag 'gfs2-v5.12-rc2-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: report "already frozen/thawed" errors
gfs2: Flag a withdraw if init_threads() fails
Merge tag 'riscv-for-linus-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"A handful of fixes for 5.12:
- fix a stack tracing regression related to "const register asm"
variables, which have unexpected behavior.
- ensure the value to be written by put_user() is evaluated before
enabling access to userspace memory..
- align the exception vector table correctly, so we don't rely on the
firmware's handling of unaligned accesses.
- build fix to make NUMA depend on MMU, which triggered on some
randconfigs"
* tag 'riscv-for-linus-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Make NUMA depend on MMU
riscv: remove unneeded semicolon
riscv,entry: fix misaligned base for excp_vect_table
riscv: evaluate put_user() arg before enabling user access
riscv: Drop const annotation for sp
Merge tag 'powerpc-5.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fix a bug on pseries where spurious wakeups from H_PROD would prevent
partition migration from succeeding.
Fix oopses seen in pcpu_alloc(), caused by parallel faults of the
percpu mapping causing us to corrupt the protection key used for the
mapping, and cause a fatal key fault.
Thanks to Aneesh Kumar K.V, Murilo Opsfelder Araujo, and Nathan Lynch"
* tag 'powerpc-5.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm/book3s64: Use the correct storage key value when calling H_PROTECT
powerpc/pseries/mobility: handle premature return from H_JOIN
powerpc/pseries/mobility: use struct for shared state
Merge tag 'driver-core-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here is a single driver core fix for a reported problem with differed
probing. It has been in linux-next for a while with no reported
problems"
* tag 'driver-core-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: clear deferred probe reason on probe retry
Merge tag 'char-misc-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a few small driver char/misc changes for 5.12-rc6.
Nothing major here, a few fixes for reported issues:
- interconnect fixes for problems found
- fbcon syzbot-found fix
- extcon fixes
- firmware stratix10 bugfix
- MAINTAINERS file update.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
drivers: video: fbcon: fix NULL dereference in fbcon_cursor()
mei: allow map and unmap of client dma buffer only for disconnected client
MAINTAINERS: Add linux-phy list and patchwork
interconnect: Fix kerneldoc warning
firmware: stratix10-svc: reset COMMAND_RECONFIG_FLAG_PARTIAL to 0
extcon: Fix error handling in extcon_dev_register
extcon: Add stubs for extcon_register_notifier_all() functions
interconnect: core: fix error return code of icc_link_destroy()
interconnect: qcom: msm8939: remove rpm-ids from non-RPM nodes
Merge tag 'staging-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are two rtl8192e staging driver fixes for reported problems.
Both of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8192e: Change state information from u16 to u8
staging: rtl8192e: Fix incorrect source in memcpy()
Merge tag 'tty-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fix from Greg KH:
"Here is a single serial driver fix for 5.12-rc6. Is is a revert of a
change that showed up in 5.9 that has been reported to cause problems.
It has been in linux-next for a while with no reported issues"
* tag 'tty-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
soc: qcom-geni-se: Cleanup the code to remove proxy votes
kernel test robot correctly pinpoints a compilation failure if
CONFIG_BLOCK isn't set:
fs/io_uring.c: In function '__io_complete_rw':
>> fs/io_uring.c:2509:48: error: implicit declaration of function 'io_rw_should_reissue'; did you mean 'io_rw_reissue'? [-Werror=implicit-function-declaration]
2509 | if ((res == -EAGAIN || res == -EOPNOTSUPP) && io_rw_should_reissue(req)) {
| ^~~~~~~~~~~~~~~~~~~~
| io_rw_reissue
cc1: some warnings being treated as errors
Ensure that we have a stub declaration of io_rw_should_reissue() for
!CONFIG_BLOCK.
Fixes: 230d50d448ac ("io_uring: move reissue into regular IO path") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge tag 'block-5.12-2021-04-02' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Remove comment that never came to fruition in 22 years of development
(Christoph)
- Remove unused request flag (Christoph)
- Fix for null_blk fake timeout handling (Damien)
- Fix for IOCB_NOWAIT being ignored for O_DIRECT on raw bdevs (Pavel)
- Error propagation fix for multiple split bios (Yufen)
* tag 'block-5.12-2021-04-02' of git://git.kernel.dk/linux-block:
block: remove the unused RQF_ALLOCED flag
block: update a few comments in uapi/linux/blkpg.h
block: don't ignore REQ_NOWAIT for direct IO
null_blk: fix command timeout completion handling
block: only update parent bi_status when bio fail
Merge tag 'io_uring-5.12-2021-04-02' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Nothing really major in here, and finally nothing really related to
signals. A few minor fixups related to the threading changes, and some
general fixes, that's it.
There's the pending gdb-get-confused-about-arch, but that's more of a
cosmetic issue, nothing that hinder use of it. And given that other
archs will likely be affected by that oddity too, better to postpone
any changes there until 5.13 imho"
* tag 'io_uring-5.12-2021-04-02' of git://git.kernel.dk/linux-block:
io_uring: move reissue into regular IO path
io_uring: fix EIOCBQUEUED iter revert
io_uring/io-wq: protect against sprintf overflow
io_uring: don't mark S_ISBLK async work as unbounded
io_uring: drop sqd lock before handling signals for SQPOLL
io_uring: handle setup-failed ctx in kill_timeouts
io_uring: always go for cancellation spin on exec
Merge tag 'acpi-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix an ACPI tables management issue, an issue related to the
ACPI enumeration of devices and CPU wakeup in the ACPI processor
driver.
Specifics:
- Ensure that the memory occupied by ACPI tables on x86 will always
be reserved to prevent it from being allocated for other purposes
which was possible in some cases (Rafael Wysocki).
- Fix the ACPI device enumeration code to prevent it from attempting
to evaluate the _STA control method for devices with unmet
dependencies which is likely to fail (Hans de Goede).
- Fix the handling of CPU0 wakeup in the ACPI processor driver to
prevent CPU0 online failures from occurring (Vitaly Kuznetsov)"
* tag 'acpi-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor: Fix CPU0 wakeup in acpi_idle_play_dead()
ACPI: scan: Fix _STA getting called on devices with unmet dependencies
ACPI: tables: x86: Reserve memory occupied by ACPI tables
Merge tag 'pm-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a race condition and an ordering issue related to using
device links in the runtime PM framework and two kerneldoc comments in
cpufreq.
Specifics:
- Fix race condition related to the handling of supplier devices
during consumer device probe and fix the order of decrementation of
two related reference counters in the runtime PM core code handling
supplier devices (Adrian Hunter).
- Fix kerneldoc comments in cpufreq that have not been updated along
with the functions documented by them (Geert Uytterhoeven)"
* tag 'pm-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: runtime: Fix race getting/putting suppliers at probe
PM: runtime: Fix ordering in pm_runtime_get_suppliers()
cpufreq: Fix scaling_{available,boost}_frequencies_show() comments
Christoph Hellwig [Fri, 2 Apr 2021 17:17:31 +0000 (19:17 +0200)]
block: update a few comments in uapi/linux/blkpg.h
The big top of the file comment talk about grand plans that never
happened, so remove them to not confuse the readers. Also mark the
devname and volname fields as ignored as they were never used by the
kernel.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge tag 'trace-v5.12-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix stack trace entry size to stop showing garbage
The macro that creates both the structure and the format displayed to
user space for the stack trace event was changed a while ago to fix
the parsing by user space tooling. But this change also modified the
structure used to store the stack trace event. It changed the caller
array field from [0] to [8].
Even though the size in the ring buffer is dynamic and can be
something other than 8 (user space knows how to handle this), the 8
extra words was not accounted for when reserving the event on the ring
buffer, and added 8 more entries, due to the calculation of
"sizeof(*entry) + nr_entries * sizeof(long)", as the sizeof(*entry)
now contains 8 entries.
The size of the caller field needs to be subtracted from the size of
the entry to create the correct allocation size"
* tag 'trace-v5.12-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix stack trace event size
It's non-obvious how retry is done for block backed files, when it happens
off the kiocb done path. It also makes it tricky to deal with the iov_iter
handling.
Just mark the req as needing a reissue, and handling it from the
submission path instead. This makes it directly obvious that we're not
re-importing the iovec from userspace past the submit point, and it means
that we can just reuse our usual -EAGAIN retry path from the read/write
handling.
At some point in the future, we'll gain the ability to always reliably
return -EAGAIN through the stack. A previous attempt on the block side
didn't pan out and got reverted, hence the need to check for this
information out-of-band right now.
Pavel Begunkov [Fri, 20 Nov 2020 17:10:28 +0000 (17:10 +0000)]
block: don't ignore REQ_NOWAIT for direct IO
If IOCB_NOWAIT is set on submission, then that needs to get propagated to
REQ_NOWAIT on the block side. Otherwise we completely lose this
information, and any issuer of IOCB_NOWAIT IO will potentially end up
blocking on eg request allocation on the storage side.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Evan Green [Thu, 1 Apr 2021 21:04:36 +0000 (14:04 -0700)]
firmware: google: Enable s0ix logging by default
Many moons ago, support was added to the SMI handlers to log s0ix entry
and exit. Early iterations of firmware on Apollo Lake correctly returned
"unsupported" for this new command they did not recognize, but
unfortunately also contained a quirk where this command would cause them
to power down rather than resume from s0ix.
Fixes for this quirk were pushed out long ago, so all APL devices still
in the field should have updated firmware. As such, we no longer need to
have the s0ix_logging_enable be opt-in, where every new platform has to
add this to their kernel commandline parameters. Change it to be on by
default.
In theory we could remove the parameter altogether: updated versions of
Chrome OS containing a kernel with this change would also be coupled
with firmware that behaves properly with these commands. Eventually we
should probably do that. For now, convert this to an opt-out parameter
so there's an emergency valve for people who are deliberately running
old firmware, or as an escape hatch in case of unforeseen regressions.
Andy Shevchenko [Tue, 30 Mar 2021 19:33:25 +0000 (22:33 +0300)]
mux: gpio: Simplify code by using dev_err_probe()
Use already prepared dev_err_probe() introduced by the commit a787e5400a1c ("driver core: add device probe log helper").
It simplifies EPROBE_DEFER handling.
Srinivas Kandagatla [Tue, 30 Mar 2021 11:12:39 +0000 (12:12 +0100)]
nvmem: rmem: fix undefined reference to memremap
Fix below error reporte by kernel test robot
rmem.c:(.text+0x14e): undefined reference to memremap
s390x-linux-gnu-ld: rmem.c:(.text+0x1b6): undefined reference to memunmap
Fixes: 5a3fa75a4d9c ("nvmem: Add driver to expose reserved memory as nvmem") Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210330111241.19401-9-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The shifting of the u8 integer buf[3] by 24 bits to the left will
be promoted to a 32 bit signed int and then sign-extended to a
u64. In the event that the top bit of buf[3] is set then all
then all the upper 32 bits of the u64 end up as also being set
because of the sign-extension. Fix this by casting buf[i] to
a u64 before the shift.
Fixes: a28e824fb827 ("nvmem: core: Add functions to make number reading easy") Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Addresses-Coverity: ("Unintended sign extension") Link: https://lore.kernel.org/r/20210330111241.19401-8-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Douglas Anderson [Tue, 30 Mar 2021 11:12:37 +0000 (12:12 +0100)]
nvmem: core: Add functions to make number reading easy
Sometimes the clients of nvmem just want to get a number out of
nvmem. They don't want to think about exactly how many bytes the nvmem
cell took up. They just want the number. Let's make it easy.
In general this concept is useful because nvmem space is precious and
usually the fewest bits are allocated that will hold a given value on
a given system. However, even though small numbers might be fine on
one system that doesn't mean that logically the number couldn't be
bigger. Imagine nvmem containing a max frequency for a component. On
one system perhaps that fits in 16 bits. On another system it might
fit in 32 bits. The code reading this number doesn't care--it just
wants the number.
We'll provide two functions: nvmem_cell_read_variable_le_u32() and
nvmem_cell_read_variable_le_u64().
Comparing these to the existing functions like nvmem_cell_read_u32():
* These new functions have no problems if the value was stored in
nvmem in fewer bytes. It's OK to use these function as long as the
value stored will fit in 32-bits (or 64-bits).
* These functions avoid problems that the earlier APIs had with bit
offsets. For instance, you can't use nvmem_cell_read_u32() to read a
value has nbits=32 and bit_offset=4 because the nvmem cell must be
at least 5 bytes big to hold this value. The new API accounts for
this and works fine.
* These functions make it very explicit that they assume that the
number was stored in little endian format. The old functions made
this assumption whenever bit_offset was non-zero (see
nvmem_shift_read_buffer_in_place()) but didn't whenever the
bit_offset was zero.
NOTE: it's assumed that we don't need an 8-bit or 16-bit version of
this function. The 32-bit version of the function can be used to read
8-bit or 16-bit data.
At the moment, I'm only adding the "unsigned" versions of these
functions, but if it ends up being useful someone could add a "signed"
version that did 2's complement sign extension.
At the moment, I'm only adding the "little endian" versions of these
functions. Adding the "big endian" version would require adding "big
endian" support to nvmem_shift_read_buffer_in_place().
Ravi Kumar Bokka [Tue, 30 Mar 2021 11:12:34 +0000 (12:12 +0100)]
drivers: nvmem: Fix voltage settings for QTI qfprom-efuse
QFPROM controller hardware requires 1.8V min for fuse blowing.
So, this change sets the voltage to 1.8V, required to blow the fuse
for qfprom-efuse controller.
To disable fuse blowing, we set the voltage to 0V since this may
be a shared rail and may be able to run at a lower rate when we're
not blowing fuses.
Fixes: 93b4e49f8c86 ("nvmem: qfprom: Add fuse blowing support") Reported-by: Douglas Anderson <dianders@chromium.org> Suggested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210330111241.19401-4-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Brad Warrum [Tue, 30 Mar 2021 21:22:38 +0000 (16:22 -0500)]
MAINTAINERS: Update entry for ibmvmc driver
Steve Royer has moved on to a different project and has asked
that Ritu and I take over maintainership of the IBM Power
Virtual Management Channel Driver.
YueHaibing [Wed, 31 Mar 2021 12:17:06 +0000 (20:17 +0800)]
misc/pvpanic: Make some symbols static
Fix sparse warnings:
drivers/misc/pvpanic/pvpanic.c:28:18: warning:
symbol 'pvpanic_list' was not declared. Should it be static?
drivers/misc/pvpanic/pvpanic.c:29:12: warning:
symbol 'pvpanic_lock' was not declared. Should it be static?
Qiheng Lin [Tue, 30 Mar 2021 01:36:59 +0000 (09:36 +0800)]
misc/pvpanic: fix return value check in pvpanic_pci_probe()
In case of error, the function pci_iomap() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.
Zihao Yu [Wed, 17 Mar 2021 08:17:25 +0000 (16:17 +0800)]
riscv,entry: fix misaligned base for excp_vect_table
In RV64, the size of each entry in excp_vect_table is 8 bytes. If the
base of the table is not 8-byte aligned, loading an entry in the table
will raise a misaligned exception. Although such exception will be
handled by opensbi/bbl, this still causes performance degradation.
Ben Dooks [Mon, 29 Mar 2021 09:57:49 +0000 (10:57 +0100)]
riscv: evaluate put_user() arg before enabling user access
The <asm/uaccess.h> header has a problem with put_user(a, ptr) if
the 'a' is not a simple variable, such as a function. This can lead
to the compiler producing code as so:
1: enable_user_access()
2: evaluate 'a' into register 'r'
3: put 'r' to 'ptr'
4: disable_user_acess()
The issue is that 'a' is now being evaluated with the user memory
protections disabled. So we try and force the evaulation by assigning
'x' to __val at the start, and hoping the compiler barriers in
enable_user_access() do the job of ordering step 2 before step 1.
This has shown up in a bug where 'a' sleeps and thus schedules out
and loses the SR_SUM flag. This isn't sufficient to fully fix, but
should reduce the window of opportunity. The first instance of this
we found is in scheudle_tail() where the code does:
$ less -N kernel/sched/core.c
4263 if (current->set_child_tid)
4264 put_user(task_pid_vnr(current), current->set_child_tid);
Here, the task_pid_vnr(current) is called within the block that has
enabled the user memory access. This can be made worse with KASAN
which makes task_pid_vnr() a rather large call with plenty of
opportunity to sleep.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Reported-by: syzbot+e74b94fe601ab9552d69@syzkaller.appspotmail.com Suggested-by: Arnd Bergman <arnd@arndb.de>
--
Changes since v1:
- fixed formatting and updated the patch description with more info
Changes since v2:
- fixed commenting on __put_user() (schwab@linux-m68k.org)
Change since v3:
- fixed RFC in patch title. Should be ready to merge.
Merge tag 'lto-v5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull LTO fix from Kees Cook:
"It seems that there is a bug in ld.bfd when doing module section
merging.
As explicit merging is only needed for LTO, the work-around is to only
do it under LTO, leaving the original section layout choices alone
under normal builds:
- Only perform explicit module section merges under LTO (Sean
Christopherson)"
* tag 'lto-v5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kbuild: lto: Merge module sections if and only if CONFIG_LTO_CLANG is enabled
Sean Christopherson [Mon, 22 Mar 2021 23:44:38 +0000 (16:44 -0700)]
kbuild: lto: Merge module sections if and only if CONFIG_LTO_CLANG is enabled
Merge module sections only when using Clang LTO. With ld.bfd, merging
sections does not appear to update the symbol tables for the module,
e.g. 'readelf -s' shows the value that a symbol would have had, if
sections were not merged. ld.lld does not show this problem.
The stale symbol table breaks gdb's function disassembler, and presumably
other things, e.g.
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"It's a bit larger than I (and probably you) would like by the time we
get to -rc6, but perhaps not entirely unexpected since the changes in
the last merge window were larger than usual.
x86:
- Fixes for missing TLB flushes with TDP MMU
- Fixes for race conditions in nested SVM
- Fixes for lockdep splat with Xen emulation
- Fix for kvmclock underflow
- Fix srcdir != builddir builds
- Other small cleanups
ARM:
- Fix GICv3 MMIO compatibility probing
- Prevent guests from using the ARMv8.4 self-hosted tracing
extension"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
selftests: kvm: Check that TSC page value is small after KVM_SET_CLOCK(0)
KVM: x86: Prevent 'hv_clock->system_time' from going negative in kvm_guest_time_update()
KVM: x86: disable interrupts while pvclock_gtod_sync_lock is taken
KVM: x86: reduce pvclock_gtod_sync_lock critical sections
KVM: SVM: ensure that EFER.SVME is set when running nested guest or on nested vmexit
KVM: SVM: load control fields from VMCB12 before checking them
KVM: x86/mmu: Don't allow TDP MMU to yield when recovering NX pages
KVM: x86/mmu: Ensure TLBs are flushed for TDP MMU during NX zapping
KVM: x86/mmu: Ensure TLBs are flushed when yielding during GFN range zap
KVM: make: Fix out-of-source module builds
selftests: kvm: make hardware_disable_test less verbose
KVM: x86/vPMU: Forbid writing to MSR_F15H_PERF MSRs when guest doesn't have X86_FEATURE_PERFCTR_CORE
KVM: x86: remove unused declaration of kvm_write_tsc()
KVM: clean up the unused argument
tools/kvm_stat: Add restart delay
KVM: arm64: Fix CPU interface MMIO compatibility detection
KVM: arm64: Disable guest access to trace filter controls
KVM: arm64: Hide system instruction access to Trace registers
projects / users / jedix / linux-maple.git / log