Arnd Bergmann [Mon, 16 Aug 2021 20:58:39 +0000 (22:58 +0200)]
Merge tag 'tegra-for-5.15-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
ARM: tegra: Device tree changes for v5.15-rc1
The majority of this is temperature sensor additions for various devices
and fixes to the trigger type of the thermal interrupts.
Other than that there are various minor fixes across the board.
* tag 'tegra-for-5.15-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: tamonten: Fix UART pad setting
ARM: tegra: nexus7: Improve thermal zones
ARM: tegra: acer-a500: Improve thermal zones
ARM: tegra: acer-a500: Use verbose variant of atmel,wakeup-method value
ARM: tegra: acer-a500: Add power supplies to accelerometer
ARM: tegra: acer-a500: Remove bogus USB VBUS regulators
ARM: tegra: jetson-tk1: Correct interrupt trigger type of temperature sensor
ARM: tegra: dalmore: Correct interrupt trigger type of temperature sensor
ARM: tegra: cardhu: Correct interrupt trigger type of temperature sensor
ARM: tegra: apalis: Correct interrupt trigger type of temperature sensor
ARM: tegra: nyan: Correct interrupt trigger type of temperature sensor
ARM: tegra: acer-a500: Add interrupt to temperature sensor node
ARM: tegra: nexus7: Add interrupt to temperature sensor node
ARM: tegra: paz00: Add interrupt to temperature sensor node
ARM: tegra: ouya: Add interrupt to temperature sensor node
ARM: tegra: Add SoC thermal sensor to Tegra30 device-trees
Dmitry Osipenko [Mon, 2 Aug 2021 21:19:47 +0000 (00:19 +0300)]
ARM: tegra: nexus7: Improve thermal zones
Use skin temperature for maintaining temperature that is suitable
specifically for Nexus 7. Add CPU thermal zone that protects silicon.
All these changes don't make a significant difference, but it is a
more correct definition of thermal zones.
Dmitry Osipenko [Mon, 2 Aug 2021 21:19:46 +0000 (00:19 +0300)]
ARM: tegra: acer-a500: Improve thermal zones
Use skin temperature for maintaining temperature that is suitable
specifically for A500. Add CPU thermal zone that protects silicon.
All these changes don't make a significant difference, but it is a
more correct definition of thermal zones.
Dmitry Osipenko [Mon, 2 Aug 2021 21:19:45 +0000 (00:19 +0300)]
ARM: tegra: acer-a500: Use verbose variant of atmel,wakeup-method value
The verbose variant of the atmel,wakeup-method value was lost when patch
that added the property was merged because it conflicted with other patch,
re-add it for consistency.
Dmitry Osipenko [Mon, 2 Aug 2021 21:19:43 +0000 (00:19 +0300)]
ARM: tegra: acer-a500: Remove bogus USB VBUS regulators
The configuration of USB VBUS regulators was borrowed from downstream
kernel, which is incorrect because the corresponding GPIOs are connected
to PROX_EN (A501 3G model) and LED_EN pins in accordance to the board
schematics. USB works fine with both GPIOs being disabled, so remove the
bogus USB VBUS regulators. The USB VBUS of USB3 is supplied from the fixed
5v system regulator and device-mode USB1 doesn't have VBUS switches.
Dmitry Osipenko [Mon, 2 Aug 2021 21:19:42 +0000 (00:19 +0300)]
ARM: tegra: jetson-tk1: Correct interrupt trigger type of temperature sensor
The LM90 temperature sensor should use edge-triggered interrupt because
LM90 hardware doesn't deassert interrupt line until temperature is back
to normal state, which results in interrupt storm. Correct the interrupt
trigger type.
Dmitry Osipenko [Mon, 2 Aug 2021 21:19:41 +0000 (00:19 +0300)]
ARM: tegra: dalmore: Correct interrupt trigger type of temperature sensor
The LM90 temperature sensor should use edge-triggered interrupt because
LM90 hardware doesn't deassert interrupt line until temperature is back
to normal state, which results in interrupt storm. Correct the interrupt
trigger type.
Dmitry Osipenko [Mon, 2 Aug 2021 21:19:40 +0000 (00:19 +0300)]
ARM: tegra: cardhu: Correct interrupt trigger type of temperature sensor
The LM90 temperature sensor should use edge-triggered interrupt because
LM90 hardware doesn't deassert interrupt line until temperature is back
to normal state, which results in interrupt storm. Correct the interrupt
trigger type.
Dmitry Osipenko [Mon, 2 Aug 2021 21:19:39 +0000 (00:19 +0300)]
ARM: tegra: apalis: Correct interrupt trigger type of temperature sensor
The LM90 temperature sensor should use edge-triggered interrupt because
LM90 hardware doesn't deassert interrupt line until temperature is back
to normal state, which results in interrupt storm. Correct the interrupt
trigger type.
Dmitry Osipenko [Mon, 2 Aug 2021 21:19:38 +0000 (00:19 +0300)]
ARM: tegra: nyan: Correct interrupt trigger type of temperature sensor
The LM90 temperature sensor should use edge-triggered interrupt because
LM90 hardware doesn't deassert interrupt line until temperature is back
to normal state, which results in interrupt storm. Correct the interrupt
trigger type.
Dmitry Osipenko [Mon, 2 Aug 2021 21:19:34 +0000 (00:19 +0300)]
ARM: tegra: ouya: Add interrupt to temperature sensor node
The TEMP_ALERT pin of LM90 temperature sensor is connected to Tegra SoC.
Add interrupt property to the temperature sensor and enable it in pinmux,
for completeness.
Dmitry Osipenko [Mon, 2 Aug 2021 21:19:33 +0000 (00:19 +0300)]
ARM: tegra: Add SoC thermal sensor to Tegra30 device-trees
Add the on-chip SoC thermal sensor to Tegra30 device-trees. Now CPU
temperature reporting and thermal throttling is available on all Tegra30
devices universally.
Arnd Bergmann [Thu, 12 Aug 2021 20:56:26 +0000 (22:56 +0200)]
Merge tag 'omap-for-v5.15/dt-am3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Changes for am3 cpsw and SanCloud for v5.15
A series of changes to update am3 to use cpsw switch driver and
few updates to earlier SanCloud changes. The plan was to send the
cpsw switch driver changes earlier but looks like I never tagged
the mail thread in my inbox to apply for v5.15.
* tag 'omap-for-v5.15/dt-am3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-sancloud-bbe: Drop usb wifi comment
ARM: dts: am335x-sancloud-bbe: Fix missing pinctrl refs
ARM: dts: am335x-bone: switch to new cpsw switch drv
ARM: dts: am33xx: update ethernet aliases
ARM: dts: am335x-sl50: switch to new cpsw switch drv
ARM: dts: am335x-shc: switch to new cpsw switch drv
ARM: dts: am335x-phycore: switch to new cpsw switch drv
ARM: dts: am335x-pepper: switch to new cpsw switch drv
ARM: dts: am335x-pdu001: switch to new cpsw switch drv
ARM: dts: am335x-osd3358-sm-red: switch to new cpsw switch drv
ARM: dts: am335x-myirtech: switch to new cpsw switch drv
ARM: dts: am335x-moxa-uc: switch to new cpsw switch drv
ARM: dts: am335x-lxm: switch to new cpsw switch drv
ARM: dts: am335x-igep0033: switch to new cpsw switch drv
ARM: dts: am335x-cm-t335: switch to new cpsw switch drv
ARM: dts: am335x-chiliboard: switch to new cpsw switch drv
ARM: dts: am335x-nano: switch to new cpsw switch drv
ARM: dts: am335x-baltos: switch to new cpsw switch drv
Arnd Bergmann [Thu, 12 Aug 2021 20:55:50 +0000 (22:55 +0200)]
Merge tag 'samsung-dt64-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.15
1. Add CPU topology and cache information to Exynos DTSI files.
2. Correct GIC CPU interfaces address range on Exynos7.
* tag 'samsung-dt64-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: correct GIC CPU interfaces address range on Exynos7
arm64: dts: exynos: add CPU topology to Exynos5433
arm64: dts: exynos: Add cpu cache information to Exynos5433
arm64: dts: exynos: Add cpu cache information to Exynos7
Arnd Bergmann [Thu, 12 Aug 2021 20:55:17 +0000 (22:55 +0200)]
Merge tag 'samsung-dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.15
Add CPU topology to all Exynos DTSI files.
* tag 'samsung-dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: add CPU topology to Exynos5422
ARM: dts: exynos: add CPU topology to Exynos5420
ARM: dts: exynos: add CPU topology to Exynos5260
ARM: dts: exynos: add CPU topology to Exynos5250
ARM: dts: exynos: add CPU topology to Exynos4412
ARM: dts: exynos: add CPU topology to Exynos4210
ARM: dts: exynos: add CPU topology to Exynos3250
Arnd Bergmann [Thu, 12 Aug 2021 20:54:50 +0000 (22:54 +0200)]
Merge tag 'amlogic-arm-dt-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dt
Amlogic ARM DT changes for v5.15:
- meson8: use a default higher default GPU clock to solve probe failure
- meson: add AIU audio controller and codec for ec100
- meson8b: fix pwm regulator supply property name
* tag 'amlogic-arm-dt-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
ARM: dts: meson8b: ec100: Fix the pwm regulator supply properties
ARM: dts: meson8b: mxq: Fix the pwm regulator supply properties
ARM: dts: meson8b: odroidc1: Fix the pwm regulator supply properties
ARM: dts: meson8b: ec100: wire up the RT5640 audio codec
ARM: dts: meson: Add the AIU audio controller
ARM: dts: meson8: Use a higher default GPU clock frequency
Arnd Bergmann [Thu, 12 Aug 2021 20:49:21 +0000 (22:49 +0200)]
Merge tag 'stm32-dt-for-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT for v5.15, round 1
Highlights:
----------
-MPU:
- ST boards:
- Add coporcessor detach mailbox on ED and DKx boards
- Fix dtbs_check SAI warnings
- DH boards:
-Fix some dtbs_check warnings: usb, backlight, hdmi
* tag 'stm32-dt-for-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: Update AV96 adv7513 node per dtbs_check
ARM: dts: stm32: Set {bitclock,frame}-master phandles on ST DKx
ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15x-dkx boards
ARM: dts: stm32: Add coprocessor detach mbox on stm32mp157c-ed1 board
ARM: dts: stm32: Add usbphyc_port1 supply on DHCOM SoM
ARM: dts: stm32: Add backlight and panel supply on DHCOM SoM
ARM: dts: stm32: Set {bitclock,frame}-master phandles on DHCOM SoM
ARM: dts: stm32: Fix touchscreen IRQ line assignment on DHCOM
ARM: dts: stm32: Disable LAN8710 EDPD on DHCOM
ARM: dts: stm32: Prefer HW RTC on DHCOM SoM
The Renesas RZ/A and RZ/G2L I2C Bus Interface has no less than 8
interrupts. Hence document the "interrupt-names" property, to make it
easier to review the interrupt mappings in DTS files.
Note that this property cannot be made required yet, as the RIIC nodes
in all DTS files lack the property.
Krzysztof Kozlowski [Thu, 5 Aug 2021 07:21:10 +0000 (09:21 +0200)]
arm64: dts: exynos: correct GIC CPU interfaces address range on Exynos7
The GIC-400 CPU interfaces address range is defined as 0x2000-0x3FFF (by
ARM).
Reported-by: Sam Protsenko <semen.protsenko@linaro.org> Reported-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Fixes: b9024cbc937d ("arm64: dts: Add initial device tree support for exynos7") Link: https://lore.kernel.org/r/20210805072110.4730-1-krzysztof.kozlowski@canonical.com
ARM: dts: ixp4xx: Add device trees for Coyote and IXDPG425
This adds device trees for the ADI Engineering Coyote and the
Intel IXDPG425 reference design. The ethernet set-up on the
IXDPG425 is a bit dubious because I think it uses a DSA
switch chip, but this is a good as it gets right now.
The Coyote boardfile claims an IDE port exist at 0xFFFE1000
but the implementation does not use this. If you have the
board and can/want to test, please contact me.
ARM: dts: ixp4xx: Add Gateworks Avila GW2348 device tree
This adds a device tree file for the Gateworks Avila GW2348 platform
supporting all the features of the in-kernel boardfiles.
There are more boards in the Avila family, but this is the one that
is supported out-of-the-box by the current boardfiles. Some extra
features have been folded in from the upstream OpenWrt sources,
such as proper ethernet setup for both ethernet ports.
More variants can be added based on this device tree. Some of those
have DSA switches, multiple LEDs, multiple serial ports and similar
and would need some more elaborate work.
Cc: Michael-Luke Jones <mlj28@cam.ac.uk> Cc: Deepak Saxena <dsaxena@plexity.net> Cc: Tom Billman <kernel@giantshoulderinc.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Replace the "simple-bus" simplification by the proper bus for
IXP4xx memory or device expansion.
Use chip-select addressing with two address cells on all the
flashes mounted on the IXP4xx devices. This includes all flash
chips.
Change the unit-name from @50000000 to @c4000000 as the DTS
validation screams. The registers for controlling the bus are
at c4000000 but the actual memory windows and ranges are at 50000000. Well it is just syntax, we can live with it.
ARM: dts: ixp4xx: Add devicetree for D-Link DSM-G600 rev A
This adds a devicetree for the D-Link DSM-G600 Wireless Network
Storage Enclosure so that we can delete the boardfile. The boardfile
does not even define an ethernet interface as it has an external
ethernet on PCI. This devicetree is for revision A using IXP420
the rev B version uses PowerPC.
Cc: Michael-Luke Jones <mlj28@cam.ac.uk> Cc: Rod Whitby <rod@whitby.id.au> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Michael Westerhof <mwester@dls.net> Cc: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Tue, 15 Jun 2021 22:53:38 +0000 (00:53 +0200)]
ARM: dts: ixp4xx: Add devicetree for Iomega NAS 100D
This creates a more or less fully featured device tree for the
IXP42x-based Iomega NAS 100D.
We can't read out the raw flash contents for ethernet MAC, and
we cannot handle a power-off-button inside the kernel like the
boardfile does. These two things are normally done in userspace.
This conversion is part of moving all of the IXP4xx board files
over to device tree to modernize the IXP4xx kernel.
Alain Volmat [Wed, 31 Mar 2021 20:42:25 +0000 (22:42 +0200)]
ARM: dts: sti: add the spinor controller node within stih407-family
The STiH407 family (and further versions STiH410/STiH418) embedded
a serial flash controller allowing fast access to SPI-NOR.
This commit adds the corresponding node, relying on the st-spi-fsm
drivers.
Alain Volmat [Wed, 31 Mar 2021 20:42:24 +0000 (22:42 +0200)]
ARM: dts: sti: update clkgen-fsyn entries in stih418-clock
The clkgen-fsyn driver now embed the clock names (assuming the
right compatible is used). Remove all clock-output-names property
and update when necessary the compatible.
Alain Volmat [Wed, 31 Mar 2021 20:42:23 +0000 (22:42 +0200)]
ARM: dts: sti: update clkgen-fsyn entries in stih410-clock
The clkgen-fsyn driver now embed the clock names (assuming the
right compatible is used). Remove all clock-output-names property
and update when necessary the compatible.
Alain Volmat [Wed, 31 Mar 2021 20:42:22 +0000 (22:42 +0200)]
ARM: dts: sti: update clkgen-fsyn entries in stih407-clock
The clkgen-fsyn driver now embed the clock names (assuming the
right compatible is used). Remove all clock-output-names property
and update when necessary the compatible.
Alain Volmat [Wed, 31 Mar 2021 20:42:21 +0000 (22:42 +0200)]
ARM: dts: sti: update clkgen-pll entries in stih418-clock
The clkgen-pll driver now embed the clock names (assuming the
right compatible is used). Remove all clock-output-names property
and update when necessary the compatible.
Alain Volmat [Wed, 31 Mar 2021 20:42:20 +0000 (22:42 +0200)]
ARM: dts: sti: update clkgen-pll entries in stih410-clock
The clkgen-pll driver now embed the clock names (assuming the
right compatible is used). Remove all clock-output-names property
and update when necessary the compatible.
Alain Volmat [Wed, 31 Mar 2021 20:42:19 +0000 (22:42 +0200)]
ARM: dts: sti: update clkgen-pll entries in stih407-clock
The clkgen-pll driver now embed the clock names (assuming the
right compatible is used). Remove all clock-output-names property
and update when necessary the compatible.
Alain Volmat [Wed, 31 Mar 2021 20:42:18 +0000 (22:42 +0200)]
ARM: dts: sti: update flexgen compatible within stih410-clock
With the introduction of new flexgen compatible within the clk-flexgen
driver, remove the clock-output-names entry from the flexgen nodes
and set the new proper compatible corresponding.
Alain Volmat [Wed, 31 Mar 2021 20:42:17 +0000 (22:42 +0200)]
ARM: dts: sti: update flexgen compatible within stih407-clock
With the introduction of new flexgen compatible within the clk-flexgen
driver, remove the clock-output-names entry from the flexgen nodes
and set the new proper compatible corresponding.
Alain Volmat [Wed, 31 Mar 2021 20:42:16 +0000 (22:42 +0200)]
ARM: dts: sti: update flexgen compatible within stih418-clock
With the introduction of new flexgen compatible within the clk-flexgen
driver, remove the clock-output-names entry from the flexgen nodes
and set the new proper compatible corresponding.
Grygorii Strashko [Thu, 5 Aug 2021 23:09:56 +0000 (02:09 +0300)]
ARM: dts: am335x-bone: switch to new cpsw switch drv
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, Switch BeagleBone boards to use new cpsw switch driver. Those boards
have or 2 Ext. port wired and configured in dual_mac mode by default, or
only 1 Ext. port.
For am335x-sancloud-bbe-common.dtsi also removed duplicated davinci_mdio DT
nodes which already defined in am335x-bone-common.dtsi.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Grygorii Strashko [Sat, 12 Jun 2021 01:14:35 +0000 (04:14 +0300)]
ARM: dts: am335x-sl50: switch to new cpsw switch drv
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, switch Toby Churchill SL50 Series to use new cpsw switch driver.
Those boards have or 2 Ext. port wired and configured in dual_mac mode by
default, or only 1 Ext. port.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Grygorii Strashko [Sat, 12 Jun 2021 01:14:34 +0000 (04:14 +0300)]
ARM: dts: am335x-shc: switch to new cpsw switch drv
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, switch Bosch SHC to use new cpsw switch driver.
Those boards have or 2 Ext. port wired and configured in dual_mac mode by
default, or only 1 Ext. port.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Grygorii Strashko [Sat, 12 Jun 2021 01:14:33 +0000 (04:14 +0300)]
ARM: dts: am335x-phycore: switch to new cpsw switch drv
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, switch Phytec AM335x phyCORE SOM, phyBOARD-WEGA, phyBOARD-REGOR,
PCM-953 to use new cpsw switch driver. Those boards have or 2 Ext. port
wired and configured in dual_mac mode by default, or only 1 Ext. port.
Grygorii Strashko [Sat, 12 Jun 2021 01:14:32 +0000 (04:14 +0300)]
ARM: dts: am335x-pepper: switch to new cpsw switch drv
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, switch Gumstix Pepper to use new cpsw switch driver.
Those boards have or 2 Ext. port wired and configured in dual_mac mode by
default, or only 1 Ext. port.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Grygorii Strashko [Sat, 12 Jun 2021 01:14:31 +0000 (04:14 +0300)]
ARM: dts: am335x-pdu001: switch to new cpsw switch drv
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, switch EETS,PDU001 to use new cpsw switch driver. Those boards have or
2 Ext. port wired and configured in dual_mac mode by default, or only 1
Ext. port.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Grygorii Strashko [Sat, 12 Jun 2021 01:14:30 +0000 (04:14 +0300)]
ARM: dts: am335x-osd3358-sm-red: switch to new cpsw switch drv
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, switch Octavo Systems OSD3358-SM-RED to use new cpsw switch driver.
Those boards have or 2 Ext. port wired and configured in dual_mac mode by
default, or only 1 Ext. port.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Grygorii Strashko [Sat, 12 Jun 2021 01:14:29 +0000 (04:14 +0300)]
ARM: dts: am335x-myirtech: switch to new cpsw switch drv
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, switch MYIR MYC-AM335X/MYD-AM335X to use new cpsw switch driver. Those
boards have or 2 Ext. port wired and configured in dual_mac mode by
default, or only 1 Ext. port.
Cc: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Grygorii Strashko [Sat, 12 Jun 2021 01:14:28 +0000 (04:14 +0300)]
ARM: dts: am335x-moxa-uc: switch to new cpsw switch drv
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, switch Moxa am335x-moxa-uc-210x/8100 to use new cpsw switch driver.
Those boards have or 2 Ext. port wired and configured in dual_mac mode by
default, or only 1 Ext. port.
Cc: Johnson Chen <johnsonch.chen@moxa.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Grygorii Strashko [Sat, 12 Jun 2021 01:14:27 +0000 (04:14 +0300)]
ARM: dts: am335x-lxm: switch to new cpsw switch drv
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, switch NovaTech OrionLXm to use new cpsw switch driver. Those boards
have or 2 Ext. port wired and configured in dual_mac mode by default, or
only 1 Ext. port
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Grygorii Strashko [Sat, 12 Jun 2021 01:14:26 +0000 (04:14 +0300)]
ARM: dts: am335x-igep0033: switch to new cpsw switch drv
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, switch am335x-igep0033 to use new cpsw switch driver. Those boards have
or 2 Ext. port wired and configured in dual_mac mode by default, or only 1
Ext. port.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Grygorii Strashko [Sat, 12 Jun 2021 01:14:25 +0000 (04:14 +0300)]
ARM: dts: am335x-cm-t335: switch to new cpsw switch drv
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, switch CompuLab CM-T335 to use new cpsw switch driver. Those boards
have or 2 Ext. port wired and configured in dual_mac mode by default, or
only 1 Ext. port.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Grygorii Strashko [Sat, 12 Jun 2021 01:14:24 +0000 (04:14 +0300)]
ARM: dts: am335x-chiliboard: switch to new cpsw switch drv
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, switch AM335x Chiliboard to use new cpsw switch driver. Those boards
have or 2 Ext. port wired and configured in dual_mac mode by default, or
only 1 Ext. port.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Grygorii Strashko [Sat, 12 Jun 2021 01:14:23 +0000 (04:14 +0300)]
ARM: dts: am335x-nano: switch to new cpsw switch drv
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, switch Newflow AM335x NanoBone to use new cpsw switch driver. Those
boards have or 2 Ext. port wired and configured in dual_mac mode by
default, or only 1 Ext. port.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Grygorii Strashko [Sat, 12 Jun 2021 01:14:22 +0000 (04:14 +0300)]
ARM: dts: am335x-baltos: switch to new cpsw switch drv
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.
So, switch OnRISC Baltos and NetCom/Cam boards to use new cpsw switch
driver. Those boards have or 2 Ext. port wired and configured in dual_mac
mode by default, or only 1 Ext. port.
Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
arm64: dts: mediatek: mt8173: Add domain supply for mfg_async
da9211 regulator needs to be enabled before enabling the mfg_async power
domain. Otherwise the subdomain is not enabled and causes failure in
imgtec gpu driver boot.
Add the "domain-supply" property to the "mfg_async" node in DT.
Hsin-Yi Wang [Wed, 28 Jul 2021 04:07:10 +0000 (12:07 +0800)]
arm64: dts: mt8173: elm: Use aliases to mmc nodes
With commit 1796164fac7e ("dt-bindings: mmc: document alias support"),
a way to specify fixed index numbers was provided. This patch use aliases
to mmc nodes so the partition name for eMMC and SD card will be consistent
across boots.
Hsin-Yi Wang [Wed, 28 Jul 2021 04:07:09 +0000 (12:07 +0800)]
arm64: dts: mt8183: kukui: Use aliases to mmc nodes
With commit 1796164fac7e ("dt-bindings: mmc: document alias support"),
a way to specify fixed index numbers was provided. This patch use aliases
to mmc nodes so the partition name for eMMC and SD card will be consistent
across boots.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20210728040710.2891955-1-hsinyi@chromium.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
projects / users / dwmw2 / linux.git / log