Akihiko Odaki [Thu, 23 Feb 2023 10:20:07 +0000 (19:20 +0900)]
hw/net/net_rx_pkt: Remove net_rx_pkt_has_virt_hdr
When virtio-net header is not set, net_rx_pkt_get_vhdr() returns
zero-filled virtio_net_hdr, which is actually valid. In fact, tap device
uses zero-filled virtio_net_hdr when virtio-net header is not provided
by the peer. Therefore, we can just remove net_rx_pkt_has_virt_hdr() and
always assume NetTxPkt has a valid virtio-net header.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
Akihiko Odaki [Thu, 23 Feb 2023 10:20:05 +0000 (19:20 +0900)]
net: Strip virtio-net header when dumping
filter-dump specifiees Ethernet as PCAP LinkType, which does not expect
virtio-net header. Having virtio-net header in such PCAP file breaks
PCAP unconsumable. Unfortunately currently there is no LinkType for
virtio-net so for now strip virtio-net header to convert the output to
Ethernet.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
Akihiko Odaki [Thu, 23 Feb 2023 10:20:03 +0000 (19:20 +0900)]
net: Check L4 header size
net_tx_pkt_build_vheader() inspects TCP header but had no check for
the header size, resulting in an undefined behavior. Check the header
size and drop the packet if the header is too small.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
Akihiko Odaki [Thu, 23 Feb 2023 10:20:02 +0000 (19:20 +0900)]
e1000e: Remove extra pointer indirection
e1000e_write_packet_to_guest() passes the reference of variable ba as a
pointer to an array, and that pointer indirection is just unnecessary;
all functions which uses the passed reference performs no pointer
operation on the pointer and they simply dereference the passed
pointer. Remove the extra pointer indirection.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
Akihiko Odaki [Thu, 23 Feb 2023 10:20:01 +0000 (19:20 +0900)]
e1000e: Set MII_ANER_NWAY
This keeps Windows driver 12.18.9.23 from generating an event with ID
30. The description of the event is as follows:
> Intel(R) 82574L Gigabit Network Connection
> PROBLEM: The network adapter is configured for auto-negotiation but
> the link partner is not. This may result in a duplex mismatch.
> ACTION: Configure the link partner for auto-negotiation.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
Akihiko Odaki [Thu, 23 Feb 2023 10:20:00 +0000 (19:20 +0900)]
e1000e: Introduce e1000_rx_desc_union
Before this change, e1000e_write_packet_to_guest() allocated the
receive descriptor buffer as an array of uint8_t. This does not ensure
the buffer is sufficiently aligned.
Introduce e1000_rx_desc_union type, a union type of all receive
descriptor types to correct this.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
Akihiko Odaki [Thu, 23 Feb 2023 10:19:59 +0000 (19:19 +0900)]
e1000e: Configure ResettableClass
This is part of recent efforts of refactoring e1000 and e1000e.
DeviceClass's reset member is deprecated so migrate to ResettableClass.
There is no behavioral difference.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
Akihiko Odaki [Thu, 23 Feb 2023 10:19:58 +0000 (19:19 +0900)]
e1000: Configure ResettableClass
This is part of recent efforts of refactoring e1000 and e1000e.
DeviceClass's reset member is deprecated so migrate to ResettableClass.
There is no behavioral difference.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
Akihiko Odaki [Thu, 23 Feb 2023 10:19:57 +0000 (19:19 +0900)]
e1000e: Improve software reset
This change makes e1000e reset more things when software reset was
triggered. Some registers are exempted from software reset in the
datasheet and this change also implements the behavior accordingly.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
Akihiko Odaki [Thu, 23 Feb 2023 10:19:53 +0000 (19:19 +0900)]
e1000e: Use more constant definitions
The definitions of SW Semaphore Register were copied from:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/drivers/net/ethernet/intel/e1000e/defines.h?h=v6.0.9#n374
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
Akihiko Odaki [Thu, 23 Feb 2023 10:19:52 +0000 (19:19 +0900)]
e1000: Use more constant definitions
The definitions for E1000_VFTA_ENTRY_SHIFT, E1000_VFTA_ENTRY_MASK, and
E1000_VFTA_ENTRY_BIT_SHIFT_MASK were copied from:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/drivers/net/ethernet/intel/e1000/e1000_hw.h?h=v6.0.9#n306
The definitions for E1000_NUM_UNICAST, E1000_MC_TBL_SIZE, and
E1000_VLAN_FILTER_TBL_SIZE were copied from:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/drivers/net/ethernet/intel/e1000/e1000_hw.h?h=v6.0.9#n707
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
Akihiko Odaki [Thu, 23 Feb 2023 10:19:51 +0000 (19:19 +0900)]
e1000e: Mask registers when writing
When a register has effective bits fewer than their width, the old code
inconsistently masked when writing or reading. Make the code consistent
by always masking when writing, and remove some code duplication.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
Akihiko Odaki [Thu, 23 Feb 2023 10:19:49 +0000 (19:19 +0900)]
e1000: Mask registers when writing
When a register has effective bits fewer than their width, the old code
inconsistently masked when writing or reading. Make the code consistent
by always masking when writing, and remove some code duplication.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
Akihiko Odaki [Thu, 23 Feb 2023 10:19:48 +0000 (19:19 +0900)]
e1000: Use hw/net/mii.h
hw/net/mii.h provides common definitions for MII.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
Akihiko Odaki [Thu, 23 Feb 2023 10:19:47 +0000 (19:19 +0900)]
fsl_etsec: Use hw/net/mii.h
hw/net/mii.h provides common definitions for MII.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
Akihiko Odaki [Thu, 23 Feb 2023 10:19:45 +0000 (19:19 +0900)]
e1000e: Fix the code style
igb implementation first starts off by copying e1000e code. Correct the
code style before that.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
Peter Maydell [Thu, 9 Mar 2023 16:54:51 +0000 (16:54 +0000)]
Merge tag 'pull-gdbstub-070323-3' of https://gitlab.com/stsquad/qemu into staging
gdbstub refactor:
- split user and softmmu code
- use cleaner headers for tb_flush, target_ulong
- probe for gdb multiarch support at configure
- make syscall handling target independent
- add update guest debug of accel ops
* tag 'pull-gdbstub-070323-3' of https://gitlab.com/stsquad/qemu: (30 commits)
gdbstub: move update guest debug to accel ops
gdbstub: Build syscall.c once
stubs: split semihosting_get_target from system only stubs
gdbstub: Adjust gdb_do_syscall to only use uint32_t and uint64_t
gdbstub: Remove gdb_do_syscallv
gdbstub: split out softmmu/user specifics for syscall handling
include: split target_long definition from cpu-defs
testing: probe gdb for supported architectures ahead of time
gdbstub: only compile gdbstub twice for whole build
gdbstub: move syscall handling to new file
gdbstub: move register helpers into standalone include
gdbstub: don't use target_ulong while handling registers
gdbstub: fix address type of gdb_set_cpu_pc
gdbstub: specialise stub_can_reverse
gdbstub: introduce gdb_get_max_cpus
gdbstub: specialise target_memory_rw_debug
gdbstub: specialise handle_query_attached
gdbstub: abstract target specific details from gdb_put_packet_binary
gdbstub: rationalise signal mapping in softmmu
gdbstub: move chunks of user code into own files
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 9 Mar 2023 15:19:30 +0000 (15:19 +0000)]
Merge tag 'pull-request-2023-03-07' of https://gitlab.com/thuth/qemu into staging
* Refine the distro support policy
* Deprecate 32-bit x86 and arm hosts for system emulation
* Check bison version to be >= 3.0
* Compile vnc test only if vnc is really enabled
* Check docs/config/ich9-ehci-uhci.cfg via the readconfig-test
* s390x: Add support for list-directed IPL from ECKD DASD
* tag 'pull-request-2023-03-07' of https://gitlab.com/thuth/qemu:
pc-bios/s390-ccw: Update s390-ccw.img with the list-directed IPL fix
pc-bios: Add support for List-Directed IPL from ECKD DASD
docs/config: Set the "kvm" accelerator via "[accel]" section
tests/qtest/readconfig: Test docs/config/ich9-ehci-uhci.cfg
tests/qtest/readconfig: Rework test_object_rng_resp into a generic function
gitlab-ci.d/crossbuilds: Drop the 32-bit arm system emulation jobs
docs/about/deprecated: Deprecate 32-bit arm hosts for system emulation
gitlab-ci.d/crossbuilds: Drop the i386 system emulation job
docs/about/deprecated: Deprecate 32-bit x86 hosts for system emulation
include/hw/i386: Clean up includes in x86.h
test: Check vnc enable before compiling vnc test
Hexagon (meson.build): define min bison version
docs/about/build-platforms: Refine the distro support policy
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 9 Mar 2023 13:22:05 +0000 (13:22 +0000)]
Merge tag 'xenfv-2' of git://git.infradead.org/users/dwmw2/qemu into staging
Enable PV backends with Xen/KVM emulation
This is phase 2, following on from the basic platform support which was
already merged.
• Add a simple single-tenant internal XenStore implementation
• Indirect Xen gnttab/evtchn/foreignmem/xenstore through operations table
• Provide emulated back ends for Xen operations
• Header cleanups to allow PV back ends to build without Xen itself
• Enable PV back ends in emulated mode
• Documentation update
Tested-by: Paul Durrant <paul@xen.org>
... on real Xen (master branch, 4.18) with a Debian guest.
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCgAwFiEEMUsIrNDeSBEzpfKGm+mA/QrAFUQFAmQHu3wSHGR3bXdAYW1h
# em9uLmNvLnVrAAoJEJvpgP0KwBVE5LYP/0VodDsQdP7Z4L+/IzgBSgEec7qmyQFB
# KlBZS/PmvCZKb0DHLI3GhXIyzD+/fnLtGSRl0rYObnKP7im+MpEDGmn97f6nIITk
# AzkdsVhNEBQFXCkLgQ9y8kTrTmsod9O4sqn0+naa2TX4FPcRN0MaNmpuLEubvaRS
# +JuyHmwy9ZeeAnsU31uJ0nx4F1hW9IDaatNoDeFcFnKCXQp36rtdZUViMowUJvwu
# Q+Xyg6dybusznaoiXd485tTPrTt+FK/wEARse3q2gRh9QblLu0r5BFb0rOfhYCTQ
# jw+5lBsOX+UlffmB9IDakRpVe4RKhvvRQSkRvYkPCshsqud9zMGhaquKg1vKBgca
# I31XSN0LCcon/ahHGtmVAxyZUpWdEnfzO1TbTNpz9oacROklgVgEYdw5Vwca71VD
# SURl6uCt9Jb9WmsR4twus4i4qDjQIDOtOF0hcxpl7HGktkxlGxUVI4qVLXARtVCS
# OTB6N0LlhJ2woj2wYK5BRTiOj03T2MkJEWaYhDdIrQREKWe2Sn4xTOH5kGbQQnOr
# km93odjBZFRHsAUnzXHXW3+yHjMefH7KrHePbmvsO4foGF77bBxosuC2ehFfvNJ0
# VM/H04NDtPYCBwdAr545PSN/q+WzEPQaquLZ0UuTBuPpMMOYd+Ff8YvQWJPyCM18
# 1mq9v6Xe9RQZ
# =JGLX
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Mar 2023 22:32:28 GMT
# gpg: using RSA key 314B08ACD0DE481133A5F2869BE980FD0AC01544
# gpg: issuer "dwmw@amazon.co.uk"
# gpg: Good signature from "David Woodhouse <dwmw@amazon.co.uk>" [unknown]
# gpg: aka "David Woodhouse <dwmw@amazon.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 314B 08AC D0DE 4811 33A5 F286 9BE9 80FD 0AC0 1544
* tag 'xenfv-2' of git://git.infradead.org/users/dwmw2/qemu: (27 commits)
docs: Update Xen-on-KVM documentation for PV disk support
MAINTAINERS: Add entry for Xen on KVM emulation
i386/xen: Initialize Xen backends from pc_basic_device_init() for emulation
hw/xen: Implement soft reset for emulated gnttab
hw/xen: Map guest XENSTORE_PFN grant in emulated Xenstore
hw/xen: Add emulated implementation of XenStore operations
hw/xen: Add emulated implementation of grant table operations
hw/xen: Hook up emulated implementation for event channel operations
hw/xen: Only advertise ring-page-order for xen-block if gnttab supports it
hw/xen: Avoid crash when backend watch fires too early
hw/xen: Build PV backend drivers for CONFIG_XEN_BUS
hw/xen: Rename xen_common.h to xen_native.h
hw/xen: Use XEN_PAGE_SIZE in PV backend drivers
hw/xen: Move xenstore_store_pv_console_info to xen_console.c
hw/xen: Add xenstore operations to allow redirection to internal emulation
hw/xen: Add foreignmem operations to allow redirection to internal emulation
hw/xen: Pass grant ref to gnttab unmap operation
hw/xen: Add gnttab operations to allow redirection to internal emulation
hw/xen: Add evtchn operations to allow redirection to internal emulation
hw/xen: Create initial XenStore nodes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 9 Mar 2023 10:23:05 +0000 (10:23 +0000)]
Merge tag 'pull-aspeed-20230307' of https://github.com/legoater/qemu into staging
aspeed queue:
* Small adjustments for the newest Meta machines
* blk_pread_nonzeroes() fix required for pflash and m25p80 devices
* Improve error reporting on file size for m25p80 devices
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmQHXi8ACgkQUaNDx8/7
# 7KHB7w//SQzcTNAUgMc6zbe3bULS9YU7csg0zX896DwQ9Ub4wtbnIps0/JwOsx6E
# ss52YbbRVlHKcbahX6WW8JHtc6Wepcmnp4vC5dXdqgRryLTK5GgBu/GKcBb6qnHZ
# uXwJpf7IwygOXQFg9Wy4zl3ipmrjgzMy6ZEbc3oqQUto+8E7HVMJiMXnrT5Y0yLt
# Y76PywBxkYWcd522lWAXziXFxHaEJGMGrDCI/op4TuNAk0QLSRHp+x851JBF0Uyx
# Lkp1cEjgADoH1FUfvo7aCNtAWGP4IFDprEupI3idPqjZ8KnnwPk2cnBMGeKJ5lWQ
# XfSTwG5B3hYwGM0uYwHzHXUsq5/JGa0iDhSvjZVD8rf/w9BTek/GjypbJpL2XW6b
# 4QaGGKGFWWMHbAaNVP6oEGqmkoC3QRKoQuaP6epaFyuSjNRWXkOhf5S5V10akjSc
# xis0Z8gIpyLrtFT2TFc5BN9+z+PLgyaYyh7wZ2pFy1i6SOgh4FIFBOzQJDb05mmf
# aFMD+6FOGx0wo8OXfy5EQyElWhVSYio+Hx9DaDP3d3cd/twHJx8nZ8QlXh2ThRd8
# jNLdFReJBImCJHSmYzbc/tGDOjg6+TWkZOzdjqTra08UwisK4XyOKj8E+sodWr0y
# e/hI9nmIoarLCytMN1zElQFvj8xjpZ2lZOxr2EiX5ugYg0iuJhU=
# =Xs26
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Mar 2023 15:54:23 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20230307' of https://github.com/legoater/qemu:
hw/arm/aspeed: Modified BMC FRU byte data in yosemitev2
hw/arm/aspeed: Added TMP421 type sensor's support in tiogapass
hw/arm/aspeed: Added TMP421 type sensor's support in yosemitev2
pflash: Fix blk_pread_nonzeroes()
m25p80: Improve error when the backend file size does not match the device
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 9 Mar 2023 10:22:49 +0000 (10:22 +0000)]
Merge tag 'mips-misc-20230308' of https://github.com/philmd/qemu into staging
MIPS (and few misc) patches
- MIPS
- Remove obsolete "mips" board from target-mips.rst
- Fix JALS32/J32/SWM32 instructions for microMIPS
- Fix CP0.Config7.WII handling on pre-R6 cores
- HW
- Revert "Remove intermediate IRQ forwarder" commits
- Implement legacy LTIM Edge/Level Bank Select in Intel 8259 INTC
- Improve PCI IRQ routing in VT82C686 / Pegasos II
- Basic implementation of VIA AC97 audio playback
- Implement 'resume on connection status change' in USB OHCI
- UI
- Override windowDidResignKey
- memory
- Dump HPA and access type in HMP 'info ramblock'
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmQHzH8ACgkQ4+MsLN6t
# wN4RbxAAtbsbJKHikHevCiE9Fi0E4HHI4su00m3anImogfU3CKIHA7WHgeUVCdVH
# aLoFKjvE3d45FA4YwMs13wIo89tv6btn1y8C9iy+yjktdABPUr8OJphuaDxU+yNf
# XhPm4WsS0tEg5KzzTHF7qotJGw7Zd0Aca8oezFVBSL8b73lqiJiWBEouFTK9j5Oi
# s1uvAOPG3oxSlT7IIbnLRIEff4hi5FZh+LxRDgE3ChcOyY2W/DhrpdVIazv9Cpki
# facQ0ozMG4uuZ+HvviuTkK1vLX1+BcS0P1fnDPkXEPAxqx9jdqsMqWHbbnseQPN3
# xcVhw+GOZ67x8qAWIBKDG7nfChbcXgJ2sHxQmvb2XlxnOYw1oO5aRlrnn7ZPEWYA
# NbqUHB8G88wDcrms+Y+xCfO8idnr7Kzf4/1R1J1+5yEjg8Y1wu4t0asqZvhXA2HL
# F1yhHDCRY8w9pLYmPFGBrINBCoosiDn61g+JTngPffq1zJttmWjSLe9BYOF8Kiw+
# 4YjkCx43wK6RLTZNhU8g7iuqoYbHCQcXx5ZnGEadk+UJcfGrLnOrQbtAhvysS2wo
# msyum0FNWhnx/IZ6bmhmbFC8F/hASgyiV9CDwU2oOZ2oAkRiFXYBfXruUAt+6uLT
# UnAihAEsyUjyg5YNb4r8ZNkdeCPN6p3s2xY8OHphqu717K6uJXw=
# =D/0W
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Mar 2023 23:45:03 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'mips-misc-20230308' of https://github.com/philmd/qemu:
log: Remove unneeded new line
memory: Dump HPA and access type of ramblocks
ui/cocoa: Override windowDidResignKey
hw/usb/ohci: Implement resume on connection status change
hw/audio/via-ac97: Basic implementation of audio playback
hw/usb/vt82c686-uhci-pci: Use PCI IRQ routing
hw/ppc/pegasos2: Fix PCI interrupt routing
hw/isa/vt82c686: Implement PCI IRQ routing
hw/intc/i8259: Implement legacy LTIM Edge/Level Bank Select
hw/display/sm501: Add debug property to control pixman usage
Revert "hw/isa/vt82c686: Remove intermediate IRQ forwarder"
Revert "hw/isa/i82378: Remove intermediate IRQ forwarder"
hw/mips/itu: Pass SAAR using QOM link property
hw/mips: Declare all length properties as unsigned
target/mips: Set correct CP0.Config[4, 5] values for M14K(c)
target/mips: Implement CP0.Config7.WII bit support
target/mips: Fix SWM32 handling for microMIPS
target/mips: Fix JALS32/J32 instruction handling for microMIPS
target/mips: Replace [g_]assert(0) -> g_assert_not_reached()
docs/system: Remove "mips" board from target-mips.rst
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Jared Rossi [Tue, 21 Feb 2023 17:45:48 +0000 (12:45 -0500)]
pc-bios: Add support for List-Directed IPL from ECKD DASD
Check for a List Directed IPL Boot Record, which would supersede the CCW type
entries. If the record is valid, proceed to use the new style pointers
and perform LD-IPL. Each block pointer is interpreted as either an LD-IPL
pointer or a legacy CCW pointer depending on the type of IPL initiated.
In either case CCW- or LD-IPL is transparent to the user and will boot the same
image regardless of which set of pointers is used. Because the interactive boot
menu is only written with the old style pointers, the menu will be disabled for
List Directed IPL from ECKD DASD.
If the LD-IPL fails, retry the IPL using the CCW type pointers.
If no LD-IPL boot record is found, simply perform CCW type IPL as usual.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Message-Id: <20230221174548.1866861-2-jrossi@linux.ibm.com>
[thuth: Drop some superfluous parantheses] Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Tue, 28 Feb 2023 21:15:30 +0000 (22:15 +0100)]
docs/config: Set the "kvm" accelerator via "[accel]" section
Configuring the accelerator should nowadays be done via the "-accel"
command line parameter, and thus via the "[accel]" section in config
files. We also need this change for the upcoming qtests that will
use these config files, since the qtests are already using "-accel"
for setting the "qtest" accelerator and QEMU does not like mixing
"-accel ..." and "-machine accel=...".
Message-Id: <20230228211533.201837-4-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Tue, 28 Feb 2023 21:15:29 +0000 (22:15 +0100)]
tests/qtest/readconfig: Test docs/config/ich9-ehci-uhci.cfg
We've got some sample config files in docs/config/ but no means
of regression checking them. Thus let's test them in our readconfig
qtest, starting with ich9-ehci-uhci.cfg. Note: To enable the test
to read the config files from the build folder, we have to install
a symlink for docs/config in the build directory.
Message-Id: <20230228211533.201837-3-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Mon, 6 Mar 2023 08:46:58 +0000 (09:46 +0100)]
gitlab-ci.d/crossbuilds: Drop the 32-bit arm system emulation jobs
Hardly anybody still uses 32-bit arm environments for running QEMU,
so let's stop wasting our scarce CI minutes with these jobs.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Message-Id: <20230306084658.29709-6-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Mon, 6 Mar 2023 08:46:57 +0000 (09:46 +0100)]
docs/about/deprecated: Deprecate 32-bit arm hosts for system emulation
For running QEMU in system emulation mode, the user needs a rather
strong host system, i.e. not only an embedded low-frequency controller.
All recent beefy arm host machines should support 64-bit now, it's
unlikely that anybody is still seriously using QEMU on a 32-bit arm
CPU, so we deprecate the 32-bit arm hosts here to finally save use
some time and precious CI minutes.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Message-Id: <20230306084658.29709-5-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
BALATON Zoltan [Thu, 19 Jan 2023 21:40:33 +0000 (22:40 +0100)]
log: Remove unneeded new line
The help text of the -d plugin option has a new line at the end which
is not needed as one is added automatically. Fixing it removes the
unexpected empty line in -d help output.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230119214033.600FB74645F@zero.eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Akihiko Odaki [Tue, 28 Feb 2023 07:09:46 +0000 (16:09 +0900)]
ui/cocoa: Override windowDidResignKey
This fixes pressed keys being stuck when the deck is clicked and the
window loses focus.
In the past, Gustavo Noronha Silva also had a patch to fix this issue
though it only ungrabs mouse and does not release keys, and depends on
another out-of-tree patch:
https://github.com/akihikodaki/qemu/pull/3/commits/e906a80147b1dc6d4f31b6a08064ef9871a2b76c
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230228070946.12370-1-akihiko.odaki@daynix.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
BALATON Zoltan [Mon, 20 Feb 2023 18:15:09 +0000 (19:15 +0100)]
hw/usb/ohci: Implement resume on connection status change
If certain bit is set remote wake up should change state from
suspended to resume and generate interrupt. There was a todo comment
for this, implement that by moving existing resume logic to a function
and call that.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <35c4d4ccf2f73e6a87cdbd28fb6a1b33de72ed74.1676916640.git.balaton@eik.bme.hu>
[PMD: Have ohci_resume() return a boolean] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
BALATON Zoltan [Sun, 23 Jan 2022 20:40:42 +0000 (21:40 +0100)]
hw/audio/via-ac97: Basic implementation of audio playback
Add basic implementation of the AC'97 sound part used in VIA south
bridge chips. Not all features of the device is emulated, only one
playback channel is supported for now but this is enough to get sound
output from some guests using this device on pegasos2.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Volker Rümelin <vr_qemu@t-online.de> Tested-by: Rene Engel <ReneEngel80@emailn.de>
Message-Id: <63b99410895312f40e7be479f581da0805e605a1.1678188711.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Bernhard Beschow [Sat, 25 Feb 2023 17:08:59 +0000 (18:08 +0100)]
hw/usb/vt82c686-uhci-pci: Use PCI IRQ routing
According to the PCI specification, PCI_INTERRUPT_LINE shall have no
effect on hardware operations. Now that the VIA south bridges implement
the internal PCI interrupt router let's be more conformant to the PCI
specification.
Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Rene Engel <ReneEngel80@emailn.de> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <9fb86a74d16db65e3aafbb154238d55e123053eb.1678188711.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
BALATON Zoltan [Thu, 16 Feb 2023 20:27:32 +0000 (21:27 +0100)]
hw/ppc/pegasos2: Fix PCI interrupt routing
According to the PegasosII schematics the PCI interrupt lines are
connected to both the gpp pins of the Mv64361 north bridge and the
PINT pins of the VT8231 south bridge so guests can get interrupts from
either of these. So far we only had the MV64361 connections which
worked for on board devices but for additional PCI devices (such as
network or sound card added with -device) guest OSes expect interrupt
from the ISA IRQ 9 where the firmware routes these PCI interrupts in
VT8231 ISA bridge. After the previous patches we can now model this
and also remove the board specific connection from mv64361. Also
configure routing of these lines when using Virtual Open Firmware to
match board firmware for guests that expect this.
This fixes PCI interrupts on pegasos2 under Linux, MorphOS and AmigaOS.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Tested-by: Rene Engel <ReneEngel80@emailn.de>
Message-Id: <520ff9e6eeef600ee14a4116c0c7b11940cc499c.1678188711.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
BALATON Zoltan [Thu, 16 Feb 2023 20:21:35 +0000 (21:21 +0100)]
hw/isa/vt82c686: Implement PCI IRQ routing
The real VIA south bridges implement a PCI IRQ router which is configured
by the BIOS or the OS. In order to respect these configurations, QEMU
needs to implement it as well. The real chip may allow routing IRQs from
internal functions independently of PCI interrupts but since guests
usually configute it to a single shared interrupt we don't model that
here for simplicity.
Note: The implementation was taken from piix4_set_irq() in hw/isa/piix4.
Suggested-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Tested-by: Rene Engel <ReneEngel80@emailn.de>
Message-Id: <fbb016c7d0e19093335c237e15f5f6c62c4393b4.1678188711.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
David Woodhouse [Thu, 2 Mar 2023 09:06:26 +0000 (10:06 +0100)]
hw/intc/i8259: Implement legacy LTIM Edge/Level Bank Select
Back in the mists of time, before EISA came along and required per-pin
level control in the ELCR register, the i8259 had a single chip-wide
level-mode control in bit 3 of ICW1.
Even in the PIIX3 datasheet from 1996 this is documented as 'This bit is
disabled', but apparently MorphOS is using it in the version of the
i8259 which is in the Pegasos2 board as part of the VT8231 chipset.
It's easy enough to implement, and I think it's harmless enough to do so
unconditionally.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
[balaton: updated commit message as asked by author] Tested-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <3f09b2dd109d19851d786047ad5c2ff459c90cd7.1678188711.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
BALATON Zoltan [Sat, 25 Feb 2023 22:46:16 +0000 (23:46 +0100)]
hw/display/sm501: Add debug property to control pixman usage
Add a property to allow disabling pixman and always use the fallbacks
for different operations which is useful for testing different drawing
methods or debugging pixman related issues.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Tested-by: Rene Engel <ReneEngel80@emailn.de>
Message-Id: <61768ffaefa71b65a657d1365823bd43c7ee9354.1678188711.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
To be 'usable', QDev objects (which are QOM objects) must be
1/ initialized (at this point their properties can be modified), then
2/ realized (properties are consumed).
Some devices (objects) might depend on other devices. When creating
the 'QOM composition tree', parent objects can't be 'realized' until
all their children are. We might also have circular dependencies.
A common circular dependency occurs with IRQs. Device (A) has an
output IRQ wired to device (B), and device (B) has one to device (A).
When (A) is realized and connects its IRQ to an unrealized (B), the
IRQ handler on (B) is not yet created. QEMU pass IRQ between objects
as pointer. When (A) poll (B)'s IRQ, it is NULL. Later (B) is realized
and its IRQ pointers are populated, but (A) keeps a reference to a
NULL pointer.
A common pattern to bypass this circular limitation is to use 'proxy'
objects. Proxy (P) is created (and realized) before (A) and (B). Then
(A) and (B) can be created in different order, it doesn't matter: (P)
pointers are already populated.
Commit bb98e0f59cde ("hw/isa/vt82c686: Remove intermediate IRQ
forwarder") neglected the QOM/QDev circular dependency issue, and
removed the 'proxy' between the southbridge, its PCI functions and the
interrupt controller, resulting in PCI functions wiring output IRQs to
'NULL', leading to guest failures (IRQ never delivered) [1] [2].
Since we are entering feature freeze, it is safer to revert the
offending patch until we figure a way to strengthen our APIs.
To be 'usable', QDev objects (which are QOM objects) must be
1/ initialized (at this point their properties can be modified), then
2/ realized (properties are consumed).
Some devices (objects) might depend on other devices. When creating
the 'QOM composition tree', parent objects can't be 'realized' until
all their children are. We might also have circular dependencies.
A common circular dependency occurs with IRQs. Device (A) has an
output IRQ wired to device (B), and device (B) has one to device (A).
When (A) is realized and connects its IRQ to an unrealized (B), the
IRQ handler on (B) is not yet created. QEMU pass IRQ between objects
as pointer. When (A) poll (B)'s IRQ, it is NULL. Later (B) is realized
and its IRQ pointers are populated, but (A) keeps a reference to a
NULL pointer.
A common pattern to bypass this circular limitation is to use 'proxy'
objects. Proxy (P) is created (and realized) before (A) and (B). Then
(A) and (B) can be created in different order, it doesn't matter: (P)
pointers are already populated.
Commit cef2e7148e ("hw/isa/i82378: Remove intermediate IRQ forwarder")
neglected the QOM/QDev circular dependency issue, and removed the
'proxy' between the southbridge, its PCI functions and the interrupt
controller, resulting in PCI functions wiring output IRQs to
'NULL', leading to guest failures (IRQ never delivered) [1] [2].
Since we are entering feature freeze, it is safer to revert the
offending patch until we figure a way to strengthen our APIs.
Reported-by: Thomas Huth <thuth@redhat.com> Inspired-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Philippe Mathieu-Daudé [Thu, 2 Feb 2023 13:22:42 +0000 (14:22 +0100)]
hw/mips/itu: Pass SAAR using QOM link property
QOM objects shouldn't access each other internals fields
except using the QOM API.
mips_cps_realize() instantiates a TYPE_MIPS_ITU object, and
directly sets the 'saar' pointer:
if (saar_present) {
s->itu.saar = &env->CP0_SAAR;
}
In order to avoid that, pass the MIPS_CPU object via a QOM
link property, and set the 'saar' pointer in mips_itu_realize().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20230203113650.78146-10-philmd@linaro.org>
Marcin Nowakowski [Thu, 16 Feb 2023 05:17:17 +0000 (06:17 +0100)]
target/mips: Set correct CP0.Config[4, 5] values for M14K(c)
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@fungible.com> Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230216051717.3911212-5-marcin.nowakowski@fungible.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Marcin Nowakowski [Thu, 16 Feb 2023 05:17:16 +0000 (06:17 +0100)]
target/mips: Implement CP0.Config7.WII bit support
Some pre-release 6 cores use CP0.Config7.WII bit to indicate that a
disabled interrupt should wake up a sleeping CPU.
Enable this bit by default for M14K(c) and P5600. There are potentially
other cores that support this feature, but I do not have a complete
list.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@fungible.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230216051717.3911212-4-marcin.nowakowski@fungible.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Marcin Nowakowski [Thu, 16 Feb 2023 05:17:15 +0000 (06:17 +0100)]
target/mips: Fix SWM32 handling for microMIPS
SWM32 should store a sequence of 32-bit words from the GPRs, but it was
incorrectly coded to store 16-bit words only. As a result, an LWM32 that
usually follows would restore invalid register values.
Fixes: 7dd547e5ab ("target/mips: Use cpu_*_mmuidx_ra instead of
MMU_MODE*_SUFFIX")
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@fungible.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230216051717.3911212-3-marcin.nowakowski@fungible.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Mads Ynddal [Fri, 3 Mar 2023 02:58:05 +0000 (18:58 -0800)]
gdbstub: move update guest debug to accel ops
Continuing the refactor of a48e7d9e52 (gdbstub: move guest debug support
check to ops) by removing hardcoded kvm_enabled() from generic cpu.c
code, and replace it with a property of AccelOpsClass.
Signed-off-by: Mads Ynddal <m.ynddal@samsung.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230207131721.49233-1-mads@ynddal.dk>
[AJB: add ifdef around update_guest_debug_ops, fix brace] Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-27-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-30-richard.henderson@linaro.org>
Richard Henderson [Fri, 3 Mar 2023 02:58:04 +0000 (18:58 -0800)]
gdbstub: Build syscall.c once
There is no longer anything target specific.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-29-richard.henderson@linaro.org>
Alex Bennée [Tue, 7 Mar 2023 17:01:20 +0000 (17:01 +0000)]
stubs: split semihosting_get_target from system only stubs
As we are about to have a common syscalls.c for gdbstub we need to
stub out one semihosting helper function for all targets.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230307170405.796822-1-alex.bennee@linaro.org>
Richard Henderson [Fri, 3 Mar 2023 02:58:03 +0000 (18:58 -0800)]
gdbstub: Adjust gdb_do_syscall to only use uint32_t and uint64_t
Pass %x as uint32_t and %lx as uint64_t; pass the address
of %s as uint64_t and the length as uint32_t.
Add casts in semihosting/syscalls.c from target_ulong to
uint64_t; add casts from int to uint32_t for clarity.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-28-richard.henderson@linaro.org>
Richard Henderson [Fri, 3 Mar 2023 02:58:02 +0000 (18:58 -0800)]
gdbstub: Remove gdb_do_syscallv
This function is unused, except to implement gdb_do_syscall.
Fold the implementations together.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-27-richard.henderson@linaro.org>
Alex Bennée [Fri, 3 Mar 2023 02:58:01 +0000 (18:58 -0800)]
gdbstub: split out softmmu/user specifics for syscall handling
Most of the syscall code is config agnostic aside from the size of
target_ulong. In preparation for the next patch move the final bits
of specialisation into the appropriate user and softmmu helpers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230302190846.2593720-26-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-26-richard.henderson@linaro.org>
Alex Bennée [Fri, 3 Mar 2023 02:58:00 +0000 (18:58 -0800)]
include: split target_long definition from cpu-defs
While we will continue to include this via cpu-defs it is useful to be
able to define this separately for 32 and 64 bit versions of an
otherwise target independent compilation unit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-25-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-25-richard.henderson@linaro.org>
Alex Bennée [Fri, 3 Mar 2023 02:57:59 +0000 (18:57 -0800)]
testing: probe gdb for supported architectures ahead of time
Currently when we encounter a gdb that is old or not built with
multiarch in mind we fail rather messily. Try and improve the
situation by probing ahead of time and setting
HOST_GDB_SUPPORTS_ARCH=y in the relevant tcg configs. We can then skip
and give a more meaningful message if we don't run the test.
Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230302190846.2593720-24-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-24-richard.henderson@linaro.org>
Alex Bennée [Fri, 3 Mar 2023 02:57:58 +0000 (18:57 -0800)]
gdbstub: only compile gdbstub twice for whole build
Now we have removed any target specific bits from the core gdbstub
code we only need to build it twice. We have to jump a few meson hoops
to manually define the CONFIG_USER_ONLY symbol but it seems to work.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-23-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-23-richard.henderson@linaro.org>
Alex Bennée [Fri, 3 Mar 2023 02:57:57 +0000 (18:57 -0800)]
gdbstub: move syscall handling to new file
Our GDB syscall support is the last chunk of code that needs target
specific support so move it to a new file. We take the opportunity to
move the syscall state into its own singleton instance and add in a
few helpers for the main gdbstub to interact with the module.
I also moved the gdb_exit() declaration into syscalls.h as it feels
pretty related and most of the callers of it treat it as such.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-22-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-22-richard.henderson@linaro.org>
Alex Bennée [Fri, 3 Mar 2023 02:57:56 +0000 (18:57 -0800)]
gdbstub: move register helpers into standalone include
These inline helpers are all used by target specific code so move them
out of the general header so we don't needlessly pollute the rest of
the API with target specific stuff.
Note we have to include cpu.h in semihosting as it was relying on a
side effect before.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-21-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-21-richard.henderson@linaro.org>
Alex Bennée [Fri, 3 Mar 2023 02:57:55 +0000 (18:57 -0800)]
gdbstub: don't use target_ulong while handling registers
This is a hangover from the original code. addr is misleading as it is
only really a register id. While len will never exceed
MAX_PACKET_LENGTH I've used size_t as that is what strlen returns.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-20-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-20-richard.henderson@linaro.org>
Alex Bennée [Fri, 3 Mar 2023 02:57:49 +0000 (18:57 -0800)]
gdbstub: abstract target specific details from gdb_put_packet_binary
We unfortunately handle the checking of packet acknowledgement
differently for user and softmmu modes. Abstract the user mode stuff
behind gdb_got_immediate_ack with a stub for softmmu.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-14-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-14-richard.henderson@linaro.org>
Alex Bennée [Fri, 3 Mar 2023 02:57:47 +0000 (18:57 -0800)]
gdbstub: move chunks of user code into own files
The process was pretty similar to the softmmu move except we take the
time to split stuff between user.c and user-target.c to avoid as much
target specific compilation as possible. We also start to make use of
our shiny new header scheme so the user-only helpers can be included
without the rest of the exec/gsbstub.h cruft.
As before we split some functions into user and softmmu versions
Cédric Le Goater [Fri, 3 Mar 2023 07:43:30 +0000 (08:43 +0100)]
vfio: Fix vfio_get_dev_region() trace event
Simply transpose 'x8' to fix the typo and remove the ending '8'
Fixes: e61a424f05 ("vfio: Create device specific region info helper")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1526 Signed-off-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Link: https://lore.kernel.org/r/20230303074330.2609377-1-clg@kaod.org
[aw: commit log s/revert/transpose/] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Alex Williamson [Tue, 7 Mar 2023 16:53:46 +0000 (09:53 -0700)]
vfio/migration: Rename entry points
Pick names that align with the section drivers should use them from,
avoiding the confusion of calling a _finalize() function from _exit()
and generalizing the actual _finalize() to handle removing the viommu
blocker.
Joao Martins [Tue, 7 Mar 2023 12:54:48 +0000 (12:54 +0000)]
vfio/migration: Block migration with vIOMMU
Migrating with vIOMMU will require either tracking maximum
IOMMU supported address space (e.g. 39/48 address width on Intel)
or range-track current mappings and dirty track the new ones
post starting dirty tracking. This will be done as a separate
series, so add a live migration blocker until that is fixed.
Marcin Nowakowski [Thu, 16 Feb 2023 05:17:14 +0000 (06:17 +0100)]
target/mips: Fix JALS32/J32 instruction handling for microMIPS
microMIPS J & JAL instructions perform a jump in a 128MB region and 5
top bits of the address need to be preserved. This is different behavior
compared to standard mips systems, where the jump is executed within a
256MB region.
Note that microMIPS32 instruction set documentation appears to have
inconsistent information regarding JALX32 instruction - it is written in
the doc that:
"To execute a procedure call within the current 256 MB-aligned region
(...)
The low 26 bits of the target address is the target field shifted left
2 bits."
But the target address is already 26 bits. Moreover, the operation
description indicates that 28 bits are copied, so the statement about
use of 26 bits is _most likely_ incorrect and the corresponding code
remains the same as for standard mips instruction set.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@fungible.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230216051717.3911212-2-marcin.nowakowski@fungible.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In order to avoid warnings such commit c0a6665c3c ("target/i386:
Remove compilation errors when -Werror=maybe-uninitialized"),
replace all assert(0) and g_assert(0) by g_assert_not_reached().
Remove any code following g_assert_not_reached().
See previous commit for rationale.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230221232520.14480-4-philmd@linaro.org>
Alex Bennée [Fri, 3 Mar 2023 02:57:45 +0000 (18:57 -0800)]
gdbstub: make various helpers visible to the rest of the module
We will be needing to use these helpers between the user and softmmu
files so declare them in the headers, add a system prefix and remove
static from the implementations.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-10-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-10-richard.henderson@linaro.org>
Alex Bennée [Fri, 3 Mar 2023 02:57:42 +0000 (18:57 -0800)]
gdbstub: move GDBState to shared internals header
We are about to split softmmu and user mode helpers into different
files. To facilitate this we will need to share access to the GDBState
between those files.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-7-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-7-richard.henderson@linaro.org>
Alex Bennée [Fri, 3 Mar 2023 02:57:41 +0000 (18:57 -0800)]
gdbstub: define separate user/system structures
In preparation for moving user/softmmu specific bits from the main
gdbstub file we need to separate the connection details into a
user/softmmu state. As these will eventually be defined in their own
files we move them out of the common GDBState structure.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-6-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-6-richard.henderson@linaro.org>
Alex Bennée [Fri, 3 Mar 2023 02:57:38 +0000 (18:57 -0800)]
gdbstub: fix-up copyright and license files
When I started splitting gdbstub apart I was a little too boilerplate
with my file headers. Fix up to carry over Fabrice's copyright and the
LGPL license header.
Fixes: ae7467b1ac (gdbstub: move breakpoint logic to accel ops) Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-3-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-3-richard.henderson@linaro.org>
Alex Bennée [Fri, 3 Mar 2023 02:57:37 +0000 (18:57 -0800)]
gdbstub/internals.h: clean up include guard
Use something more specific to avoid name clashes.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-2-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-2-richard.henderson@linaro.org>
If we use -M pc instead of q35, we can even add an IDE disk and boot a
guest image normally through grub. But q35 gives us AHCI and that isn't
unplugged by the Xen magic, so the guests ends up seeing "both" disks.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
David Woodhouse [Tue, 10 Jan 2023 01:09:04 +0000 (01:09 +0000)]
hw/xen: Implement soft reset for emulated gnttab
This is only part of it; we will also need to get the PV back end drivers
to tear down their own mappings (or do it for them, but they kind of need
to stop using the pointers too).
Some more work on the actual PV back ends and xen-bus code is going to be
needed to really make soft reset and migration fully functional, and this
part is the basis for that.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
projects / users / dwmw2 / qemu.git / log