setup_base_ctxt() allocates a memory chunk for uctxt->groups with
hfi1_alloc_ctxt_rcv_groups(). When init_user_ctxt() fails, uctxt->groups
is not released, which will lead to a memory leak.
We should release the uctxt->groups with hfi1_free_ctxt_rcv_groups()
when init_user_ctxt() fails.
Fixes: e87473bc1b6c ("IB/hfi1: Only set fd pointer when base context is completely initialized") Link: https://lore.kernel.org/r/20220711070718.2318320-1-niejianglei2021@163.com Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If siw_recv_mpa_rr returns -EAGAIN, it means that the MPA reply hasn't
been received completely, and should not report IW_CM_EVENT_CONNECT_REPLY
in this case. This may trigger a call trace in iw_cm. A simple way to
trigger this:
server: ib_send_lat
client: ib_send_lat -R <server_ip>
The driver will clear all the interrupts in the same area
when the driver handles the interrupt of type AEQ overflow.
It should only set the interrupt status bit of type AEQ overflow.
Fixes: a5073d6054f7 ("RDMA/hns: Add eq support of hip08") Link: https://lore.kernel.org/r/20220714134353.16700-4-liangwenpeng@huawei.com Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com> Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
__qedr_alloc_mr() allocates a memory chunk for "mr->info.pbl_table" with
init_mr_info(). When rdma_alloc_tid() and rdma_register_tid() fail, "mr"
is released while "mr->info.pbl_table" is not released, which will lead
to a memory leak.
We should release the "mr->info.pbl_table" with qedr_free_pbl() when error
occurs to fix the memory leak.
Fixes: e0290cce6ac0 ("qedr: Add support for memory registeration verbs") Link: https://lore.kernel.org/r/20220714061505.2342759-1-niejianglei2021@163.com Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Acked-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
drivers/infiniband/ulp/rtrs/rtrs-clt.c:1786:19: warning: result of comparison of
constant 'MAX_SESS_QUEUE_DEPTH' (65536) with expression of type 'u16'
(aka 'unsigned short') is always false [-Wtautological-constant-out-of-range-compare]
To fix it, limit MAX_SESS_QUEUE_DEPTH to u16 max, which is 65535, and
drop the check in rtrs-clt, as it's the type u16 max.
max_node_id not equal to the ARRAY_SIZE of node array, need increase 1,
otherwise xlate will fail for the last entry. And rename max_node_id
to num_nodes to reflect the reality.
The simple_write_to_buffer() function will return positive/success if it
is able to write a single byte anywhere within the buffer. However that
potentially leaves a lot of the buffer uninitialized.
In this code it's better to return 0 if the offset is non-zero. This
code is not written to support partial writes. And then return -EFAULT
if the buffer is not completely initialized.
Not all platforms have all of the four currently supported wakeup
interrupts so use the optional irq helpers when looking up interrupts to
avoid printing error messages when an optional interrupt is not found:
dwc3-qcom a6f8800.usb: error -ENXIO: IRQ hs_phy_irq not found
According to the programming guide, it is recommended to
perform a GCTL_CORE_SOFTRESET only when switching the mode
from device to host or host to device. However, it is found
that during bootup when __dwc3_set_mode() is called for the
first time, GCTL_CORESOFTRESET is done with suspendable bit(BIT 17)
of DWC3_GUSB3PIPECTL set. This some times leads to issues
like controller going into bad state and controller registers
reading value zero. Until GCTL_CORESOFTRESET is done and
run/stop bit is set core initialization is not complete.
Setting suspendable bit of DWC3_GUSB3PIPECTL and then
performing GCTL_CORESOFTRESET is therefore not recommended.
Avoid this by only performing the reset if current_dr_role is set,
that is, when doing subsequent role switching.
Synopsys IP DWC_usb32 and DWC_usb31 version 1.90a and above deprecated
GCTL.CORESOFTRESET. The DRD mode switching flow is updated to remove the
GCTL soft reset. Add version checks to prevent using deprecated setting
in mode switching flow.
USB_AMD5536UDC should depend on HAS_DMA since it selects USB_SNP_CORE,
which depends on HAS_DMA and since 'select' does not follow any
dependency chains.
Fixes this kconfig warning:
WARNING: unmet direct dependencies detected for USB_SNP_CORE
Depends on [n]: USB_SUPPORT [=y] && USB_GADGET [=y] && (USB_AMD5536UDC [=y] || USB_SNP_UDC_PLAT [=n]) && HAS_DMA [=n]
Selected by [y]:
- USB_AMD5536UDC [=y] && USB_SUPPORT [=y] && USB_GADGET [=y] && USB_PCI [=y]
The 'pdev' and 'netdev' need to be released in error cases of
iss_net_configure().
Change the return type of iss_net_configure() to void, because it's
not used.
Fixes: 7282bee78798 ("[PATCH] xtensa: Architecture support for Tensilica Xtensa Part 8") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Provide release() callback for the platform device embedded into struct
iss_net_private and registered in the iss_net_configure so that
platform_device_unregister could be called for it.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Correct a SOP READ and WRITE DMA flags for some requests.
This update corrects DMA direction issues with SCSI commands removed from
the controller's internal lookup table.
Currently, SCSI READ BLOCK LIMITS (0x5) was removed from the controller
lookup table and exposed a DMA direction flag issue.
SCSI READ BLOCK LIMITS was recently removed from our controller lookup
table so the controller uses the respective IU flag field to set the DMA
data direction. Since the DMA direction is incorrect the FW never completes
the request causing a hang.
Some SCSI commands which use SCSI READ BLOCK LIMITS
* sg_map
* mt -f /dev/stX status
After updating controller firmware, users may notice their tape units
failing. This patch resolves the issue.
Also, the AIO path DMA direction is correct.
The DMA direction flag is a day-one bug with no reported BZ.
Fixes: 6c223761eb54 ("smartpqi: initial commit of Microsemi smartpqi driver") Link: https://lore.kernel.org/r/165730605618.177165.9054223644512926624.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We currently enable clocks BEFORE we write to PARF_PHY_CTRL reg to enable
clocks and resets. This causes the driver to never set to a ready state
with the error 'Phy link never came up'.
This is caused by the PHY clock getting enabled before setting the required
bits in the PARF regs.
A workaround for this was set but with this new discovery we can drop
the workaround and use a proper solution to the problem by just enabling
the clock only AFTER the PARF_PHY_CTRL bit is set.
This correctly sets up the PCIe link and makes it usable even when a
bootloader leaves the PCIe link in an undefined state.
AER reporting is currently disabled in the DevCtl registers of all non Root
Port PCIe devices on systems using pcie_ports_native || host->native_aer,
disabling AER completely in such systems. This is because 2bd50dd800b5
("PCI: PCIe: Disable PCIe port services during port initialization"), added
a call to pci_disable_pcie_error_reporting() *after* the AER setup was
completed for the PCIe device tree.
Here a longer analysis about the current status of AER enabling /
disabling upon bootup provided by Bjorn:
pcie_portdrv_probe
pcie_port_device_register
get_port_device_capability
pci_disable_pcie_error_reporting
clear CERE NFERE FERE URRE # <-- disable for RP USP DSP
pcie_device_init
device_register # new AER service device
aer_probe
aer_enable_rootport # RP only
set_downstream_devices_error_reporting
set_device_error_reporting # self (RP)
if (RP || USP || DSP)
pci_enable_pcie_error_reporting
set CERE NFERE FERE URRE # <-- enable for RP
pci_walk_bus
set_device_error_reporting
if (RP || USP || DSP)
pci_enable_pcie_error_reporting
set CERE NFERE FERE URRE # <-- enable for USP DSP
In a typical Root Port -> Endpoint hierarchy, the above:
- Disables Error Reporting for the Root Port,
- Enables Error Reporting for the Root Port,
- Does NOT enable Error Reporting for the Endpoint because it is not a
Root Port or Switch Port.
In a deeper Root Port -> Upstream Switch Port -> Downstream Switch
Port -> Endpoint hierarchy:
- Disables Error Reporting for the Root Port,
- Enables Error Reporting for the Root Port,
- Enables Error Reporting for both Switch Ports,
- Does NOT enable Error Reporting for the Endpoint because it is not a
Root Port or Switch Port,
- Disables Error Reporting for the Switch Ports when pcie_portdrv_probe()
claims them. AER does not re-enable it because these are not Root
Ports.
Remove this call to pci_disable_pcie_error_reporting() from
get_port_device_capability(), leaving the already enabled AER configuration
intact. With this change, AER is enabled in the Root Port and the PCIe
switch upstream and downstream ports. Only the PCIe Endpoints don't have
AER enabled yet. A follow-up patch will take care of this Endpoint
enabling.
Fixes: 2bd50dd800b5 ("PCI: PCIe: Disable PCIe port services during port initialization") Link: https://lore.kernel.org/r/20220125071820.2247260-3-sr@denx.de Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Pali Rohár <pali@kernel.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Yao Hongbo <yaohongbo@linux.alibaba.com> Cc: Naveen Naidu <naveennaidu479@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Each secure guest must have a unique ASCE (address space control
element); we must avoid that new guests use the same page for their
ASCE, to avoid errors.
Since the ASCE mostly consists of the address of the topmost page table
(plus some flags), we must not return that memory to the pool unless
the ASCE is no longer in use.
Only a successful Destroy Secure Configuration UVC will make the ASCE
reusable again.
If the Destroy Configuration UVC fails, the ASCE cannot be reused for a
secure guest (either for the ASCE or for other memory areas). To avoid
a collision, it must not be used again. This is a permanent error and
the page becomes in practice unusable, so we set it aside and leak it.
On failure we already leak other memory that belongs to the ultravisor
(i.e. the variable and base storage for a guest) and not leaking the
topmost page table was an oversight.
This error (and thus the leakage) should not happen unless the hardware
is broken or KVM has some unknown serious bug.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Fixes: 29b40f105ec8d55 ("KVM: s390: protvirt: Add initial vm and cpu lifecycle handling") Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Link: https://lore.kernel.org/r/20220628135619.32410-2-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-2-imbrenda@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In set_uhs_signaling, the DDR bit is being set by fully writing the MC1R
register.
This can lead to accidental erase of certain bits in this register.
Avoid this by doing a read-modify-write operation.
Fixes: d0918764c17b ("mmc: sdhci-of-at91: fix MMC_DDR_52 timing selection") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Tested-by: Karl Olsen <karl@micro-technic.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20220630090926.15061-1-eugen.hristev@microchip.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
'erased_blocks_bitmap' is never freed. As it is allocated at the same time
as 'used_blocks_bitmap', it is likely that it should be freed also at the
same time.
Add the corresponding bitmap_free() in msb_data_clear().
of_find_matching_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
of_node_put() checks null pointer.
Fixes: ea35645a3c66 ("mmc: sdhci-of-esdhc: add support for signal voltage switch") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220523144255.10310-1-linmq006@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
There are sleep in atomic context bugs when dm_fsync_timer_callback is
executing. The root cause is that the memory allocation functions with
GFP_KERNEL or GFP_NOIO parameters are called in dm_fsync_timer_callback
which is a timer handler. The call paths that could trigger bugs are
shown below:
After commit f5ff79fddf0e ("dma-mapping: remove CONFIG_DMA_REMAP") there's
a chance of DMA buffer getting allocated via vmalloc(), which messes up
the mmapping code:
Unbinding an endpoint function from the endpoint controller shouldn't stop
the controller. This is especially a problem for multi-function endpoints
where other endpoints may still be active.
Don't stop the controller when unbinding one of its endpoints. Normally
the controller is stopped via configfs.
Fixes: 349e7a85b25f ("PCI: endpoint: functions: Add an EP function to test PCI") Link: https://lore.kernel.org/r/20220622040924.113279-1-mie@igel.co.jp Signed-off-by: Shunsuke Mie <mie@igel.co.jp> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This happens because of data race. Each thread rewrite channels's
descriptor as soon as device_prep_dma_memcpy() is called. It leads to the
situation when the driver thinks that it uses right descriptor that
actually is freed or substituted for other one.
With current fixes a descriptor changes its value only when it has
been used. A new descriptor is acquired from vc->desc_issued queue that
is already filled with descriptors that are ready to be sent. Threads
have no direct access to DMA channel descriptor. Now it is just possible
to queue a descriptor for further processing.
Although harmless, the return statement in kvm_unexpected_el2_exception
is rather confusing as the function itself has a void return type. The
C standard is also pretty clear that "A return statement with an
expression shall not appear in a function whose return type is void".
Given that this return statement does not seem to add any actual value,
let's not pointlessly violate the standard.
Build-tested with GCC 10 and CLANG 13 for good measure, the disassembled
code is identical with or without the return statement.
The bus sdw_drv_remove() and sdw_drv_shutdown() helpers are used
conditionally, if the driver provides these routines.
These helpers already test if the driver provides a .remove or
.shutdown callback, so there's no harm in invoking the
sdw_drv_remove() and sdw_drv_shutdown() unconditionally.
In addition, the current code is imbalanced with
dev_pm_domain_attach() called from sdw_drv_probe(), but
dev_pm_domain_detach() called from sdw_drv_remove() only if the driver
provides a .remove callback.
If the "snps,enable-cdm-check" property exists, we should enable the CDM
check. But previously dw_pcie_setup() could exit before doing so if the
"num-lanes" property was absent or invalid.
Move the CDM enable earlier so we do it regardless of whether "num-lanes"
is present.
If dw_pcie_ep_init() fails to perform any action after the EPC memory is
initialized and the MSI memory region is allocated, the latter parts won't
be undone thus causing a memory leak. Add a cleanup-on-error path to fix
these leaks.
dw_pcie_disable_atu() was introduced by f8aed6ec624f ("PCI: dwc:
designware: Add EP mode support") and supported only the viewport version
of the iATU CSRs.
DW PCIe IP cores v4.80a and newer also support unrolled iATU/eDMA space.
Callers of dw_pcie_disable_atu(), including pci_epc_ops.clear_bar(),
pci_epc_ops.unmap_addr(), and dw_pcie_setup_rc(), don't work correctly when
it is enabled.
Add dw_pcie_disable_atu() support for controllers with unrolled iATU CSRs
enabled.
On SDM845 two found VFE GDSC power domains shall not be operated, if
titan top is turned off, thus the former power domains will be set as
subdomains by a GDSC registration routine.
Fixes: 78412c262004 ("clk: qcom: Add camera clock controller driver for SDM845") Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220519214133.1728979-2-vladimir.zapolskiy@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
NSS port 5 and 6 frequency tables are currently broken and are causing a
wide ranges of issue like 1G not working at all on port 6 or port 5 being
clocked with 312 instead of 125 MHz as UNIPHY1 gets selected.
So, update the frequency tables with the ones from the downstream QCA 5.4
based kernel which has already fixed this.
Fixes: 7117a51ed303 ("clk: qcom: ipq8074: add NSS ethernet port clocks") Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220515210048.483898-3-robimarko@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
UBI32 Huayra PLL fails to lock in 5 us in some SoC silicon and thus it
will cause the wait_for_pll() to timeout and thus return the error
indicating that the PLL failed to lock.
This is bug in Huayra PLL HW for which SW workaround
is to set bit 26 of TEST_CTL register.
This is ported from the QCA 5.4 based downstream kernel.
Like in IPQ6018 the NSS related Alpha PLL-s require initial configuration
to work.
So, obtain the regmap that is required for the Alpha PLL configuration
and thus utilize the qcom_cc_really_probe() as we already have the regmap.
Then utilize the Alpha PLL configs from the downstream QCA 5.4 based
kernel to configure them.
This fixes the UBI32 and NSS crypto PLL-s failing to get enabled by the
kernel.
Commit cbf286e8ef83 ("xhci: fix unsafe memory usage in xhci tracing")
apparently missed one sprintf() call in xhci_decode_trb() -- replace
it with the snprintf() call as well...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
In __driver_attach function, There are also AA deadlock problem,
like the commit b232b02bf3c2 ("driver core: fix deadlock in
__device_attach").
stack like commit b232b02bf3c2 ("driver core: fix deadlock in
__device_attach").
list below:
In __driver_attach function, The lock holding logic is as follows:
...
__driver_attach
if (driver_allows_async_probing(drv))
device_lock(dev) // get lock dev
async_schedule_dev(__driver_attach_async_helper, dev); // func
async_schedule_node
async_schedule_node_domain(func)
entry = kzalloc(sizeof(struct async_entry), GFP_ATOMIC);
/* when fail or work limit, sync to execute func, but
__driver_attach_async_helper will get lock dev as
will, which will lead to A-A deadlock. */
if (!entry || atomic_read(&entry_count) > MAX_WORK) {
func;
else
queue_work_node(node, system_unbound_wq, &entry->work)
device_unlock(dev)
As above show, when it is allowed to do async probes, because of
out of memory or work limit, async work is not be allowed, to do
sync execute instead. it will lead to A-A deadlock because of
__driver_attach_async_helper getting lock dev.
Reproduce:
and it can be reproduce by make the condition
(if (!entry || atomic_read(&entry_count) > MAX_WORK)) untenable, like
below:
To fix the deadlock, move the async_schedule_dev outside device_lock,
as we can see, in async_schedule_node_domain, the parameter of
queue_work_node is system_unbound_wq, so it can accept concurrent
operations. which will also not change the code logic, and will
not lead to deadlock.
If an error occurs after a successful idr_alloc() call, the corresponding
resource must be released with idr_remove() as already done in the .remove
function.
Update the error handling path to add the missing idr_remove() call.
In accordance with [1, 2] the DW eDMA controller has been created to be
part of the DW PCIe Root Port and DW PCIe End-point controllers and to
offload the transferring of large blocks of data between application and
remote PCIe domains leaving the system CPU free for other tasks. In the
first case (eDMA being part of DW PCIe Root Port) the eDMA controller is
always accessible via the CPU DBI interface and never over the PCIe wire.
The latter case is more complex. Depending on the DW PCIe End-Point IP-core
synthesize parameters it's possible to have the eDMA registers accessible
not only from the application CPU side, but also via mapping the eDMA CSRs
over a dedicated endpoint BAR. So based on the specifics denoted above the
eDMA driver is supposed to support two types of the DMA controller setups:
1) eDMA embedded into the DW PCIe Root Port/End-point and accessible over
the local CPU from the application side.
2) eDMA embedded into the DW PCIe End-point and accessible via the PCIe
wire with MWr/MRd TLPs generated by the CPU PCIe host controller.
Since the CPU memory resides different sides in these cases the semantics
of the MEM_TO_DEV and DEV_TO_MEM operations is flipped with respect to the
Tx and Rx DMA channels. So MEM_TO_DEV/DEV_TO_MEM corresponds to the Tx/Rx
channels in setup 1) and to the Rx/Tx channels in case of setup 2).
The DW eDMA driver has supported the case 2) since e63d79d1ffcd
("dmaengine: Add Synopsys eDMA IP core driver") in the framework of the
drivers/dma/dw-edma/dw-edma-pcie.c driver.
The case 1) support was added later by bd96f1b2f43a ("dmaengine: dw-edma:
support local dma device transfer semantics"). Afterwards the driver was
supposed to cover the both possible eDMA setups, but the latter commit
turned out to be not fully correct.
The problem was that the commit together with the new functionality support
also changed the channel direction semantics so the eDMA Read-channel
(corresponding to the DMA_DEV_TO_MEM direction for case 1) now uses the
sgl/cyclic base addresses as the Source addresses of the DMA transfers and
dma_slave_config.dst_addr as the Destination address of the DMA transfers.
Similarly the eDMA Write-channel (corresponding to the DMA_MEM_TO_DEV
direction for case 1) now uses dma_slave_config.src_addr as a source
address of the DMA transfers and sgl/cyclic base address as the Destination
address of the DMA transfers. This contradicts the logic of the
DMA-interface, which implies that DEV side is supposed to belong to the
PCIe device memory and MEM - to the CPU/Application memory. Indeed it seems
irrational to have the SG-list defined in the PCIe bus space, while
expecting a contiguous buffer allocated in the CPU memory. Moreover the
passed SG-list and cyclic DMA buffers are supposed to be mapped in a way so
to be seen by the DW eDMA Application (CPU) interface.
So in order to have the correct DW eDMA interface we need to invert the
eDMA Rd/Wr-channels and DMA-slave directions semantics by selecting the
src/dst addresses based on the DMA transfer direction instead of using the
channel direction capability.
There are sleep in atomic context bugs when uploading device dump
data in mwifiex. The root cause is that dev_coredumpv could not
be used in atomic contexts, because it calls dev_set_name which
include operations that may sleep. The call tree shows execution
paths that could lead to bugs:
This patch uses delayed work to replace timer and moves the operations
that may sleep into a delayed work in order to mitigate bugs, it was
tested on Marvell 88W8801 chip whose port is usb and the firmware is
usb8801_uapsta.bin. The following is the result after using delayed
work to replace timer.
[ 134.936453] usb 1-1: == mwifiex dump information to /sys/class/devcoredump start
[ 135.043344] usb 1-1: == mwifiex dump information to /sys/class/devcoredump end
The firmware of the 88W8897 PCIe+USB card sends those events very
unreliably, sometimes bluetooth together with 2.4ghz-wifi is used and no
COEX event comes in, and sometimes bluetooth is disabled but the
coexistance mode doesn't get disabled.
This means we sometimes end up capping the rx/tx window size while
bluetooth is not enabled anymore, artifically limiting wifi speeds even
though bluetooth is not being used.
Since we can't fix the firmware, let's just ignore those events on the
88W8897 device. From some Wireshark capture sessions it seems that the
Windows driver also doesn't change the rx/tx window sizes when bluetooth
gets enabled or disabled, so this is fairly consistent with the Windows
driver.
Don't set Accessed/Dirty bits for a struct page with PG_reserved set,
i.e. don't set A/D bits for the ZERO_PAGE. The ZERO_PAGE (or pages
depending on the architecture) should obviously never be written, and
similarly there's no point in marking it accessed as the page will never
be swapped out or reclaimed. The comment in page-flags.h is quite clear
that PG_reserved pages should be managed only by their owner, and
strictly following that mandate also simplifies KVM's logic.
Fixes: 7df003c85218 ("KVM: fix overflow of zero page refcount with ksm running") Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429010416.2788472-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Original assert/deassert bit is BIT(0), but it's more resonable to modify
them to BIT(id % 32) which is based on id.
This patch will not influence any previous driver because the reset is
only used for thermal. The id (MT8183_INFRACFG_AO_THERM_SW_RST) is 0.
Fixes: 64ebb57a3df6 ("clk: reset: Modify reset-controller driver") Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20220523093346.28493-3-rex-bc.chen@mediatek.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The last resume result exposing logic in cros_ec_sleep_event()
incorrectly requires S0ix support, which doesn't work on ARM based
systems where S0ix doesn't exist. That's because cros_ec_sleep_event()
only reports the last resume result when the EC indicates the last sleep
event was an S0ix resume. On ARM systems, the last sleep event is always
S3 resume, but the EC can still detect sleep hang events in case some
other part of the AP is blocking sleep.
Always expose the last resume result if the EC supports it so that this
works on all devices regardless of S0ix support. This fixes sleep hang
detection on ARM based chromebooks like Trogdor.
Cc: Rajat Jain <rajatja@chromium.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Hsin-Yi Wang <hsinyi@chromium.org> Cc: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Reviewed-by: Evan Green <evgreen@chromium.org> Fixes: 7235560ac77a ("platform/chrome: Add support for v1 of host sleep event") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org> Link: https://lore.kernel.org/r/20220614075726.2729987-1-swboyd@chromium.org Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit e2be04c7f995 ("License cleanup: add SPDX license identifier to
uapi header files with a license") added the correct SPDX identifier to
include/uapi/linux/netfilter/xt_IDLETIMER.h.
A subsequent commit removed it for no reason and reintroduced the UAPI
license incorrectness as the file is now missing the UAPI exception
again.
Add it back and remove the GPLv2 boilerplate while at it.
In the function tegra_xusb_powerdomain_init(),
dev_pm_domain_attach_by_name() may return NULL in some cases,
so IS_ERR() doesn't meet the requirements. Thus fix it.
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: 73108aa90cbf ("USB: ohci-nxp: Use isp1301 driver") Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220603141231.979-1-linmq006@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
of_find_compatible_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes: 796bcae7361c ("USB: powerpc: Workaround for the PPC440EPX USBH_23 errata [take 3]") Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220602110849.58549-1-linmq006@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: 237960880960 ("mtd: partitions: redboot: seek fis-index-block in the right node") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220526110652.64849-1-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a deadlock between sm_release and sm_cache_flush_work
which is a work item. The cancel_work_sync in sm_release will
not return until sm_cache_flush_work is finished. If we hold
mutex_lock and use cancel_work_sync to wait the work item to
finish, the work item also requires mutex_lock. As a result,
the sm_release will be blocked forever. The race condition is
shown below:
Smatch warnings:
drivers/hid/hid-cp2112.c:793 cp2112_xfer() error: __memcpy()
'data->block[1]' too small (33 vs 255)
drivers/hid/hid-cp2112.c:793 cp2112_xfer() error: __memcpy() 'buf' too
small (64 vs 255)
The 'read_length' variable is provided by 'data->block[0]' which comes
from user and it(read_length) can take a value between 0-255. Add an
upper bound to 'read_length' variable to prevent a buffer overflow in
memcpy().
pm_runtime_enable() will increase power disable depth. If
dw_pcie_ep_init() fails, we should use pm_runtime_disable() to balance it
with pm_runtime_enable().
Add missing pm_runtime_disable() for tegra_pcie_config_ep().
Fixes: c57247f940e8 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194") Link: https://lore.kernel.org/r/20220602031910.55859-1-linmq006@gmail.com Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
of_find_matching_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: b0afd44bc192 ("mtd: physmap_of: add a hook for Versatile write protection") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220523143255.4376-1-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
of_find_matching_node_and_match() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: b0afd44bc192 ("mtd: physmap_of: add a hook for Versatile write protection") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220523140205.48625-1-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
There are two UART clock groups, each having a mux to select its
upstream clock source. The register/bit definitions for accessing these
two muxes appear to have been reversed since introduction. Correct them
so as to match the hardware manual.
In case push_rcu() and related functions are buggy, there's a
WARN_ON(len >= 128), which the selftest tries to hit by being tricky. In
case it is hit, we shouldn't corrupt the kernel's stack, though;
otherwise it may be hard to even receive the report that it's buggy. So
conditionalize the stack write based on that WARN_ON()'s return value.
Note that this never *actually* happens anyway. The WARN_ON() in the
first place is bounded by IS_ENABLED(DEBUG), and isn't expected to ever
actually hit. This is just a debugging sanity check.
Additionally, hoist the constant 128 into a named enum,
MAX_ALLOWEDIPS_BITS, so that it's clear why this value is chosen.
Using msleep() is problematic because it's compared against
ratelimiter.c's ktime_get_coarse_boottime_ns(), which means on systems
with slow jiffies (such as UML's forced HZ=100), the result is
inaccurate. So switch to using schedule_hrtimeout().
However, hrtimer gives us access only to the traditional posix timers,
and none of the _COARSE variants. So now, rather than being too
imprecise like jiffies, it's too precise.
One solution would be to give it a large "range" value, but this will
still fire early on a loaded system. A better solution is to align the
timeout to the actual coarse timer, and then round up to the nearest
tick, plus change.
So add the timeout to the current coarse time, and then
schedule_hrtimer() until the absolute computed time.
This should hopefully reduce flakes in CI as well. Note that we keep the
retry loop in case the entire function is running behind, because the
test could still be scheduled out, by either the kernel or by the
hypervisor's kernel, in which case restarting the test and hoping to not
be scheduled out still helps.
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the case of sk->dccps_qpolicy == DCCPQ_POLICY_PRIO, dccp_qpolicy_full
will drop a skb when qpolicy is full. And the lock in dccp_sendmsg is
released before sock_alloc_send_skb and then relocked after
sock_alloc_send_skb. The following conditions may lead dccp_qpolicy_push
to add skb to an already full sk_write_queue:
thread1--->lock
thread1--->dccp_qpolicy_full: queue is full. drop a skb
thread1--->unlock
thread2--->lock
thread2--->dccp_qpolicy_full: queue is not full. no need to drop.
thread2--->unlock
thread1--->lock
thread1--->dccp_qpolicy_push: add a skb. queue is full.
thread1--->unlock
thread2--->lock
thread2--->dccp_qpolicy_push: add a skb!
thread2--->unlock
Fix this by moving dccp_qpolicy_full.
Fixes: b1308dc015eb ("[DCCP]: Set TX Queue Length Bounds via Sysctl") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Link: https://lore.kernel.org/r/20220729110027.40569-1-hbh25y@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The prototype of input features of ionic_set_nic_features() is
netdev_features_t, but the vlan_flags is using the private
definition of ionic drivers. It should use the variable
ctx.cmd.lif_setattr.features, rather than features to check
the vlan flags. So fixes it.
Fixes: beead698b173 ("ionic: Add the basic NDO callbacks for netdev support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Acked-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Bernard reported that trying to unload rose module would lead
to infamous messages:
unregistered_netdevice: waiting for rose0 to become free. Usage count = xx
This patch solves the issue, by making sure each socket referring to
a netdevice holds a reference count on it, and properly releases it
in rose_release().
rose_dev_first() is also fixed to take a device reference
before leaving the rcu_read_locked section.
Following patch will add ref_tracker annotations to ease
future bug hunting.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Bernard Pidoux <f6bvp@free.fr> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Bernard Pidoux <f6bvp@free.fr> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
We need to suppress warnings from sily map sizes. Also switch
from GFP_USER to GFP_KERNEL_ACCOUNT, I'm pretty sure I misunderstood
the flags when writing this code.
Fix max_rate option in TC, check for proper quanta boundaries.
Check for minimum value provided and if it fits expected 50Mbps
quanta.
Without this patch, iavf could send settings for max_rate limiting
that would be accepted from by PF even the max_rate option is less
than expected 50Mbps quanta. It results in no rate limiting
on traffic as rate limiting will be floored to 0.
The commit 3c82a21f4320 ("net: allow binding socket in a VRF when
there's an unbound socket") changed the inet socket lookup to avoid
packets in a VRF from matching an unbound socket. This is to ensure the
necessary isolation between the default and other VRFs for routing and
forwarding. VRF-unaware processes running in the default VRF cannot
access another VRF and have to be run with 'ip vrf exec <vrf>'. This is
to be expected with tcp_l3mdev_accept disabled, but could be reallowed
when this sysctl option is enabled. So instead of directly checking dif
and sdif in inet[6]_match, here call inet_sk_bound_dev_eq(). This
allows a match on unbound socket for non-zero sdif i.e. for packets in
a VRF, if tcp_l3mdev_accept is enabled.
Fixes: 3c82a21f4320 ("net: allow binding socket in a VRF when there's an unbound socket") Signed-off-by: Mike Manning <mvrmanning@gmail.com> Link: https://lore.kernel.org/netdev/a54c149aed38fded2d3b5fdb1a6c89e36a083b74.camel@lasnet.de/ Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
While reading sysctl_tcp_l3mdev_accept, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
Fixes: 6dd9a14e92e5 ("net: Allow accepted sockets to be bound to l3mdev domain") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The authentication algorithm supports a maximum of 128-byte keys.
The allocated key memory is insufficient.
Fixes: 2f072d75d1ab ("crypto: hisilicon - Add aead support on SEC2") Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Without MODULE_DEVICE_TABLE, crypto_safexcel.ko module is not automatically
loaded on platforms where inside-secure crypto HW is specified in device
tree (e.g. Armada 3720). So add missing MODULE_DEVICE_TABLE for of.
MLX5E_MAX_RQ_NUM_MTTS should be the maximum value, so that
MLX5_MTT_OCTW(MLX5E_MAX_RQ_NUM_MTTS) fits into u16. The current value of
1 << 17 results in MLX5_MTT_OCTW(1 << 17) = 1 << 16, which doesn't fit
into u16. This commit replaces it with the maximum value that still
fits u16.
The driver reports whether TX/RX TLS device offloads are supported, but
not which ciphers/versions, these should be handled by returning
-EOPNOTSUPP when .tls_dev_add() is called.
Remove the WARN_ON kernel trace when the driver gets a request to
offload a cipher/version that is not supported as it is expected.
Not all DPB entries will be used most of the time. Unused entries will
thus have invalid timestamps. They will produce negative buffer index
which is not specifically handled. This works just by chance in current
code. It will even produce bogus pointer, but since it's not used, it
won't do any harm.
Let's fix that brittle design by skipping writing DPB entry altogether
if timestamp is invalid.
After successfull station association, if station queues are disabled for
some reason, the related lists are not emptied. So if some new element is
added to the list in iwl_mvm_mac_wake_tx_queue, it can match with the old
one and produce a BUG like this:
Commit 7a4836560a61 changes simple_write_to_buffer() with memdup_user()
but it forgets to change the value to be returned that came from
simple_write_to_buffer() call. It results in the following warning:
warning: variable 'rc' is uninitialized when used here [-Wuninitialized]
return rc;
^~
Remove rc variable and just return the passed in length if the
memdup_user() succeeds.
Cc: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: kernel test robot <lkp@intel.com> Fixes: 7a4836560a6198d245d5732e26f94898b12eb760 ("wifi: wil6210: debugfs: fix info leak in wil_write_file_wmi()") Fixes: ff974e4083341383d3dd4079e52ed30f57f376f0 ("wil6210: debugfs interface to send raw WMI command") Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220724202452.61846-1-ammar.faizi@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
In i2c_mux_probe(), we should call of_node_put() when breaking out
of for_each_child_of_node() which will automatically increase and
decrease the refcount.
Fixes: ac8498f0ce53 ("i2c: i2c-mux-gpmux: new driver") Signed-off-by: Liang He <windhl@126.com> Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
SMBus packet error checking (PEC) is implemented by appending one
additional byte of checksum data at the end of the message. This provides
additional protection and allows to detect data corruption on the I2C bus.
SMBus block reads support variable length reads. The first byte in the read
message is the number of available data bytes.
The combination of PEC and block read is currently not supported by the
Cadence I2C driver.
* When PEC is enabled the maximum transfer length for block reads
increases from 33 to 34 bytes.
* The I2C core smbus emulation layer relies on the driver updating the
`i2c_msg` `len` field with the number of received bytes. The updated
length is used when checking the PEC.
Add support to the Cadence I2C driver for handling SMBus block reads with
PEC. To determine the maximum transfer length uses the initial `len` value
of the `i2c_msg`. When PEC is enabled this will be 2, when it is disabled
it will be 1.
Once a read transfer is done also increment the `len` field by the amount
of received data bytes.
This change has been tested with a UCM90320 PMBus power monitor, which
requires block reads to access certain data fields, but also has PEC
enabled by default.
After commit 3a5c7e4611dd, the variable errc is accessed before being
initialized, c.f. below W=2 warning:
| In function 'pch_can_error',
| inlined from 'pch_can_poll' at drivers/net/can/pch_can.c:739:4:
| drivers/net/can/pch_can.c:501:29: warning: 'errc' may be used uninitialized [-Wmaybe-uninitialized]
| 501 | cf->data[6] = errc & PCH_TEC;
| | ^
| drivers/net/can/pch_can.c: In function 'pch_can_poll':
| drivers/net/can/pch_can.c:484:13: note: 'errc' was declared here
| 484 | u32 errc, lec;
| | ^~~~
Moving errc initialization up solves this issue.
Fixes: 3a5c7e4611dd ("can: pch_can: do not report txerr and rxerr during bus-off") Reported-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/all/20220721160032.9348-1-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, data[5..7] of struct can_frame, when used as a CAN error
frame, are defined as being "controller specific". Device specific
behaviours are problematic because it prevents someone from writing
code which is portable between devices.
As a matter of fact, data[5] is never used, data[6] is always used to
report TX error counter and data[7] is always used to report RX error
counter. can-utils also relies on this.
This patch updates the comment in the uapi header to specify that
data[5] is reserved (and thus should not be used) and that data[6..7]
are used for error counters.
During bus off, the error count is greater than 255 and can not fit in
a u8.
Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family") Link: https://lore.kernel.org/all/20220719143550.3681-8-mailhol.vincent@wanadoo.fr CC: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / users / dwmw2 / linux.git / log