Heiko Stuebner [Tue, 27 Feb 2024 17:35:26 +0000 (18:35 +0100)]
arm64: dts: rockchip: fix reset-names for rk356x i2s2 controller
The dtbscheck reports a warning for a wrong reset-names property for
the i2s2 controller on rk356x socs.
The other controllers on the soc provide tx and rx directions and hence
two resets and separate clocks for each direction, while i2s2 only
provides one reset. This was so far named just "m" which isn't part of
the binding.
The clock-names the controller uses all end in "tx", so use the matching
"tx-m" reset-name for the i2s controller.
Elon Zhang [Wed, 21 Feb 2024 02:29:01 +0000 (10:29 +0800)]
arm64: dts: rockchip: Add devicetree support for TB-RK3588X board
Add board file for Rockchip Toybrick TB-RK3588X board.
Specification:
Rockchip Rk3588 SoC
4x ARM Cortex-A76, 4x ARM Cortex-A55
8/16GB Memory LPDDR4x
Mali G610MC4 GPU
2× MIPI-CSI0 Connector
1x 2Lanes PCIe3.0 Connector
1x SATA3.0 Connector
32GB eMMC Module
2x USB 2.0, 2x USB 3.0
1x HDMI Output, 1x HDMI Input
2x Ethernet Port
Functions work normally:
[1] USB2.0 Host
[2] Ethernet0 with PHY RTL8211F
More information can be obtained from the following websites:
[1] https://t.rock-chips.com/en/wiki/EN/tb-rk3588x_en/index.html
[2] http://t.rock-chips.com/
Tim Lunn [Wed, 14 Feb 2024 04:07:29 +0000 (15:07 +1100)]
dt-bindings: arm: rockchip: Correct vendor for Banana Pi R2 Pro
The vendor for this board was incorrectly listed as Rockchip. Fix this
now while they are not used anywhere, in the future they may be used by
bootloader to select dts.
Tim Lunn [Wed, 14 Feb 2024 04:07:28 +0000 (15:07 +1100)]
dt-bindings: arm: rockchip: Correct vendor for Orange Pi RK3399 board
The vendor for this board was incorrectly listed as Rockchip. Fix this
now while they are not used anywhere, in the future they may be used by
bootloader to select dts.
Update the vendor to Xunlong.
Signed-off-by: Tim Lunn <tim@feathertop.org> Fixes: 08b64bd2c681 ("arm64: dts: rockchip: Add support for the Orange Pi RK3399 board") Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240214040731.3069111-2-tim@feathertop.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Sebastian Reichel [Fri, 26 Jan 2024 18:18:22 +0000 (19:18 +0100)]
clk: rockchip: rk3588: fix CLK_NR_CLKS usage
CLK_NR_CLKS is not part of the DT bindings and needs to be removed
from it, just like it recently happened for other platforms. This
takes care of it by introducing a new function identifying the
maximum used clock ID at runtime.
Trevor Woerner [Tue, 16 Jan 2024 20:41:01 +0000 (15:41 -0500)]
arm64: dts: rockchip: adjust phy-handle name on rock-pi-e
The rock-pi-e currently comes in 4 board spins, the latest one (v1.21)
swaps out the Realtek 8211e PHY for an 8211f PHY. Therefore modify the
phy-handle name to be more generic.
Kever Yang [Thu, 1 Feb 2024 03:46:21 +0000 (11:46 +0800)]
arm64: dts: rockchip: remove redundant cd-gpios from rk3588 sdmmc nodes
The sdmmc node already have a "&sdmmc_det" for pinctrl which switch the
GPIO0A4 to sdmmc detect function, no need to define a separate "cd-gpios".
RK3588 has force_jtage feature which is enable JTAG function via sdmmc
pins automatically when there is no SD card insert, this feature will
need the GPIO0A4 works in sdmmc_det function like other mmc signal instead
of GPIO function, or else the force_jtag can not auto be disabled when
SD card insert.
Farouk Bouabid [Thu, 8 Feb 2024 15:39:56 +0000 (16:39 +0100)]
arm64: dts: rockchip: add rs485 support on uart5 of px30-ringneck-haikou
A hardware switch can set the rs485 transceiver into half or full duplex
mode.
Switching to the half-duplex mode requires the user to enable em485 on
uart5 using ioctl, DE/RE are both connected to GPIO0_B5 which is the
RTS signal for uart0. Implement GPIO0_B5 as rts-gpios with RTS_ON_SEND
option enabled (default) so that driver mode gets enabled while sending
(RTS high) and receiver mode gets enabled while not sending (RTS low).
In full-duplex mode (em485 is disabled), DE is connected to GPIO0_B5 and
RE is grounded (enabled). Since GPIO0_B5 is implemented as rts-gpios, the
driver mode gets enabled whenever we want to send something and RE is not
affected (always enabled) in this case by the state of RTS.
Farouk Bouabid [Thu, 8 Feb 2024 15:39:55 +0000 (16:39 +0100)]
arm64: dts: rockchip: add rs485 support on uart2 of rk3399-puma-haikou
A hardware switch can set the rs485 transceiver into half or full duplex
mode.
Switching to the half-duplex mode requires the user to enable em485 on
uart5 using ioctl, DE/RE are both connected to GPIO2_C3 which is the
RTS signal for uart0. Implement GPIO2_C3 as rts-gpios with RTS_ON_SEND
option enabled (default) so that driver mode gets enabled while sending
(RTS high) and receiver mode gets enabled while not sending (RTS low).
In full-duplex mode (em485 is disabled), DE is connected to GPIO2_C3 and
RE is grounded (enabled). Since GPIO2_C3 is implemented as rts-gpios, the
driver mode gets enabled whenever we want to send something and RE is not
affected (always enabled) in this case by the state of RTS.
Chris Morgan [Mon, 12 Feb 2024 18:49:50 +0000 (12:49 -0600)]
arm64: dts: rockchip: Add Powkiddy RGB10MAX3
Add support for the Powkiddy RGB10MAX3. The Powkiddy RGB10MAX3 is a
handheld gaming device with a 720p 5.0 inch screen powered by the
Rockchip RK3566 SoC. It includes a Realtek 8723ds WiFi/BT module, 2 ADC
joysticks powered by a 4-way muxed ADC channel, and several GPIO
face buttons. There are 2 SDMMC slots (sdmmc1 and sdmmc3), 3 pwm
controlled LEDs, and the device includes 1GB of RAM.
Chris Morgan [Mon, 12 Feb 2024 18:49:48 +0000 (12:49 -0600)]
arm64: dts: rockchip: Update powkiddy rk2023 dtsi for RGB10MAX3
Move the vdd_cpu regulator to the device specific dts. This is in
preparation of adding the Powkiddy RGB10MAX3 device, which uses
a different vendor for the CPU regulator at a different i2c address.
Also add a phandle to the bluetooth device so that we can change the
compatible string for the RGB10MAX3. This device uses the same pinouts
but a different bluetooth device.
Quentin Schulz [Tue, 9 Jan 2024 13:35:43 +0000 (14:35 +0100)]
arm64: dts: rockchip: add spi controller aliases on rk3399
There are 6 SPI controllers on RK3399 and they are all numbered in the
TRM, so let's add the appropriate aliases to the main DTSI so that any
RK3399-based board doesn't need to define the aliases themselves to
benefit from stable SPI indices in userspace.
Stefan Nagy [Sun, 17 Dec 2023 11:32:08 +0000 (12:32 +0100)]
arm64: dts: rockchip: Increase maximum frequency of SPI flash for ROCK Pi 4A/B/C
The ROCK Pi 4A/B/C boards come with a 32 Mbit SPI NOR flash chip (XTX
Technology Limited XT25F32) with a maximum clock frequency of 108 MHz.
Use this value for the device node's spi-max-frequency property.
Dragan Simic [Fri, 15 Dec 2023 05:00:33 +0000 (06:00 +0100)]
arm64: dts: rockchip: Add cache information to the SoC dtsi for RK3399
Add missing cache information to the Rockchip RK3399 SoC dtsi. The specified
values were derived by hand from the cache size specifications available from
the RK3399 datasheet; for future reference, here's a brief summary:
- Each Cortex-A72 core has 48 KB of L1 instruction cache and
32 KB of L1 data cache available, four-way set associative
- Each Cortex-A53 core core has 32 KB of instruction cache and
32 KB of L1 data cache available, four-way set associative
- The big (A72) cluster has 1 MB of unified L2 cache available
- The little (A53) cluster has 512 KB of unified L2 cache available
This patch allows /proc/cpuinfo and lscpu(1) to display proper RK3399 cache
information, and it eliminates the following error in the kernel log:
cacheinfo: Unable to detect cache hierarchy for CPU 0
While there, add a couple of somewhat useful comments, which may help a bit
anyone going through the RK3399 SoC dtsi.
Alexey Charkov [Sat, 6 Jan 2024 20:26:45 +0000 (00:26 +0400)]
arm64: dts: rockchip: add rfkill node for M.2 Key E WiFi on rock-5b
By default the GPIO pin that connects to the WiFi enable signal
inside the M.2 Key E slot is driven low, resulting in impossibility
to connect to any network. Add a DT node to expose it as an RFKILL
device, which lets the WiFi driver or userspace toggle it as
required.
Hugh Cole-Baker [Tue, 9 Jan 2024 20:27:28 +0000 (20:27 +0000)]
arm64: dts: rockchip: enable NanoPC-T6 MiniPCIe power
The NanoPC-T6 has a Mini PCIe slot intended to be used for a 4G or LTE
modem. This slot has no PCIe functionality, only USB 2.0 pins are wired
to the SoC, and USIM pins are wired to a SIM card slot on the board.
Define the 3.3v supply for the slot so it can be used.
Jagan Teki [Sat, 25 Nov 2023 19:05:14 +0000 (00:35 +0530)]
arm64: dts: rockchip: Add edgeble-neu6a-common DT
Edgeble NCM6A-IO is common compatible IO board for both NCM6A
and NCM6B. Add a common io DTSI for it to include them in both
NCM6A and NCM6B DTS files.
Iskander Amara [Wed, 3 Jan 2024 16:47:34 +0000 (17:47 +0100)]
arm64: dts: rockchip: add missing definition of pmu io domains 1 and 2 on ringneck
Two pmuio domains on ringneck are not defined:
1- PMUIO1: supplied by vcc_3v3 regulator(PMIC RK809)
2- PMUIO2: supplied by vcc_3v3 regulator(PMIC RK809)
The reason why no functional effect was observed is because of that
the above mentionned PMUIO domains were supplied by a regulator
which is always on.
Chris Morgan [Tue, 23 Jan 2024 21:21:11 +0000 (15:21 -0600)]
arm64: dts: rockchip: add Anbernic RG-ARC S and RG-ARC D
Add support for the Anbernic RG-ARC S and RG-ARC D devices. These
devices feature the following:
- Rockchip RK3566 SoC
- 4 inch 480x640 display (rotated)
- Goodix multi-touch (ARC D only, untested as I lack the device)
- 1GB (ARC S) or 2GB (ARC D) of RAM
- 2 SDMMC slots
- eMMC (ARC D only)
- Realtek 8821CS WiFi/Bluetooth
- External stereo speakers
- 6 face buttons (A, B, C, X, Y, Z) along with a D-Pad and start and
select buttons.
- A PWM vibrator.
Note that the Goodix touchscreen on I2C2 is not defined, as I lack
the necessary hardware to confirm it works correctly with the mainline
driver.
Chris Morgan [Tue, 23 Jan 2024 21:21:08 +0000 (15:21 -0600)]
arm64: dts: rockchip: Move device specific properties
Move device specific properties related to the ADC Joystick to
different board specific device trees. This is in preparation for
adding the Anbernic RG-Arc series of devices.
Linus Torvalds [Sun, 21 Jan 2024 22:01:12 +0000 (14:01 -0800)]
Merge tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs
Pull more bcachefs updates from Kent Overstreet:
"Some fixes, Some refactoring, some minor features:
- Assorted prep work for disk space accounting rewrite
- BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
makes our trigger context more explicit
- A few fixes to avoid excessive transaction restarts on
multithreaded workloads: fstests (in addition to ktest tests) are
now checking slowpath counters, and that's shaking out a few bugs
- Assorted tracepoint improvements
- Starting to break up bcachefs_format.h and move on disk types so
they're with the code they belong to; this will make room to start
documenting the on disk format better.
- A few minor fixes"
* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
bcachefs: Improve inode_to_text()
bcachefs: logged_ops_format.h
bcachefs: reflink_format.h
bcachefs; extents_format.h
bcachefs: ec_format.h
bcachefs: subvolume_format.h
bcachefs: snapshot_format.h
bcachefs: alloc_background_format.h
bcachefs: xattr_format.h
bcachefs: dirent_format.h
bcachefs: inode_format.h
bcachefs; quota_format.h
bcachefs: sb-counters_format.h
bcachefs: counters.c -> sb-counters.c
bcachefs: comment bch_subvolume
bcachefs: bch_snapshot::btime
bcachefs: add missing __GFP_NOWARN
bcachefs: opts->compression can now also be applied in the background
bcachefs: Prep work for variable size btree node buffers
bcachefs: grab s_umount only if snapshotting
...
Linus Torvalds [Sun, 21 Jan 2024 19:14:40 +0000 (11:14 -0800)]
Merge tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for time and clocksources:
- A fix for the idle and iowait time accounting vs CPU hotplug.
The time is reset on CPU hotplug which makes the accumulated
systemwide time jump backwards.
- Assorted fixes and improvements for clocksource/event drivers"
* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
clocksource/drivers/ep93xx: Fix error handling during probe
clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
clocksource/timer-riscv: Add riscv_clock_shutdown callback
dt-bindings: timer: Add StarFive JH8100 clint
dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs
Kent Overstreet [Tue, 16 Jan 2024 21:20:21 +0000 (16:20 -0500)]
bcachefs: opts->compression can now also be applied in the background
The "apply this compression method in the background" paths now use the
compression option if background_compression is not set; this means that
setting or changing the compression option will cause existing data to
be compressed accordingly in the background.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Tue, 16 Jan 2024 18:29:59 +0000 (13:29 -0500)]
bcachefs: Prep work for variable size btree node buffers
bcachefs btree nodes are big - typically 256k - and btree roots are
pinned in memory. As we're now up to 18 btrees, we now have significant
memory overhead in mostly empty btree roots.
And in the future we're going to start enforcing that certain btree node
boundaries exist, to solve lock contention issues - analagous to XFS's
AGIs.
Thus, we need to start allocating smaller btree node buffers when we
can. This patch changes code that refers to the filesystem constant
c->opts.btree_node_size to refer to the btree node buffer size -
btree_buf_bytes() - where appropriate.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In __bch2_ioctl_subvolume_create(), we grab s_umount unconditionally
and unlock it at the end of the function. There is a comment
"why do we need this lock?" about the lock coming from
commit 42d237320e98 ("bcachefs: Snapshot creation, deletion")
The reason is that __bch2_ioctl_subvolume_create() calls
sync_inodes_sb() which enforce locked s_umount to writeback all dirty
nodes before doing snapshot works.
Fix it by read locking s_umount for snapshotting only and unlocking
s_umount after sync_inodes_sb().
Signed-off-by: Su Yue <glass.su@suse.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Colin Ian King [Tue, 16 Jan 2024 11:07:23 +0000 (11:07 +0000)]
bcachefs: remove redundant variable tmp
The variable tmp is being assigned a value but it isn't being
read afterwards. The assignment is redundant and so tmp can be
removed.
Cleans up clang scan build warning:
warning: Although the value stored to 'ret' is used in the enclosing
expression, the value is never actually read from 'ret'
[deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Tue, 16 Jan 2024 01:37:23 +0000 (20:37 -0500)]
bcachefs: Fix excess transaction restarts in __bchfs_fallocate()
drop_locks_do() should not be used in a fastpath without first trying
the do in nonblocking mode - the unlock and relock will cause excessive
transaction restarts and potentially livelocking with other threads that
are contending for the same locks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Mon, 15 Jan 2024 22:59:51 +0000 (17:59 -0500)]
bcachefs: Better journal tracepoints
Factor out bch2_journal_bufs_to_text(), and use it in the
journal_entry_full() tracepoint; when we can't get a journal reservation
we need to know the outstanding journal entry sizes to know if the
problem is due to excessive flushing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Mon, 15 Jan 2024 22:56:22 +0000 (17:56 -0500)]
bcachefs: Avoid flushing the journal in the discard path
When issuing discards, we may need to flush the journal if there's too
many buckets that can't be discarded until a journal flush.
But the heuristic was bad; we should be comparing the number of buckets
that need to flushes against the number of free buckets, not the number
of buckets we saw.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Mon, 15 Jan 2024 19:15:26 +0000 (14:15 -0500)]
bcachefs: bch2_kthread_io_clock_wait() no longer sleeps until full amount
Drop t he loop in bch2_kthread_io_clock_wait(): this allows the code
that uses it to be woken up for other reasons, and fixes a bug where
rebalance wouldn't wake up when a scan was requested.
This raises the possibility of spurious wakeups, but callers should
always be able to handle that reasonably well.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Thu, 11 Jan 2024 04:47:04 +0000 (23:47 -0500)]
bcachefs: Reduce would_deadlock restarts
We don't have to take locks in any particular ordering - we'll make
forward progress just fine - but if we try to stick to an ordering, it
can help to avoid excessive would_deadlock transaction restarts.
This tweaks the reflink path to take extents btree locks in the right
order.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
projects / users / jedix / linux-maple.git / log