Olof Johansson [Tue, 20 May 2014 05:46:00 +0000 (22:46 -0700)]
Merge tag 'at91-dt2' of git://github.com/at91linux/linux-at91 into next/dt
Merge "at91: DT for 3.16 #2" from Nicolas Ferre:
3.16: second DT series:
- at91sam9rl and at91sam9261 fixes about PLL ranges
- at91sam9261 more comprehensive support for SSC
- sama5d3 Xplained: addition of pull-ups, PWM and PMIC (regulator)
* tag 'at91-dt2' of git://github.com/at91linux/linux-at91:
ARM: at91/dt: at91-sama5d3_xplained: add the regulator device node
ARM: at91: add 2 PWM outputs to SAMA5D3 Xplained
ARM: at91: add PWM pinctrl to SAMA5D3
ARM: at91: add pull-up to i2c[02] on SAMA5D3 Xplained
ARM: at91/dt: sam9rl: Fix PLL output range and mck divisors
ARM: at91/dt: sam9261: Add ssc2, SSC clocks and pcks
ARM: at91/dt: sam9261: Fix PLL output ranges and other clocks divisors
Olof Johansson [Tue, 20 May 2014 05:23:48 +0000 (22:23 -0700)]
Merge tag 'keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt
Merge "ARM: Keystone DTS updates for 3.16" from Santosh Shilimkar:
Keystone DTS updates for 3.16
- Few of address cell warning fixes.
- Add Lamarr and Edision EVM NOR flash and NAND devices.
- Update dts to make use of dma-ranges and dma-coherent properties.
* tag 'keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: dts: keystone-evm: add spi nor flash support
ARM: dts: k2l-evm: add AEMIF/NAND device entry
ARM: dts: k2e-evm: add AEMIF/NAND device entry
ARM: dts: keystone: Update USB node for dma properties
ARM: dts: keystone: Use dma-ranges property
ARM: dts: keystone: add cell's information to spi nodes
ARM: dts: keystone: move i2c0 device node from SoC to board files
ARM: dts: keystone: add cell's information to i2c nodes
ARM: dts: keystone: drop address and size cells from GIC node
* tag 'mvebu-dt-3.16' of git://git.infradead.org/linux-mvebu: (35 commits)
ARM: Kirkwood: t5325: Use simple card to instantiate audio
ARM: Kirkwood: DT: Add missing #sound-dai-cells property
ARM: Kirkwood: Add node for audio codec
ARM: dts: kirkwood: set Guruplug phy-connection-type to rgmii-id
ARM: dts: kirkwood: set Guruplug ethernet PHY compatible
ARM: dts: kirkwood: set default pinctrl for I2C1 on 6282
ARM: dts: kirkwood: set default pinctrl for I2C0
ARM: dts: kirkwood: set default pinctrl for NAND
ARM: dts: kirkwood: set default pinctrl for SPI0
ARM: dts: kirkwood: set default pinctrl for UART0/1
ARM: dts: kirkwood: set default pinctrl for GBE1
ARM: dts: kirkwood: consolidate common pinctrl settings
ARM: dts: kirkwood: add pinctrl node to common SoC include
ARM: dts: kirkwood: rename pin-controller nodes
ARM: dts: kirkwood: remove clock-frequency properties from UART nodes
ARM: dts: kirkwood: add stdout-path property to all boards
ARM: dts: kirkwood: add node labels
ARM: mvebu: Enable the thermal sensor in Armada 380/385 SoC
ARM: mvebu: Enable the thermal sensor in Armada 375 SoC
ARM: mvebu: don't use clocks property in UART node for Netgear RN2120
...
Boris BREZILLON [Tue, 13 May 2014 15:44:22 +0000 (17:44 +0200)]
ARM: sunxi: dt: add APP4-EVB1 board support
The APP4 EVB1 development boards embeds an A31, together with some NAND, one SD
card slot, and one SDIO + UART WiFi and Bluetooth chip, a few I2C buses, USB,
and a LCD display.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
ARM: shmobile: dts: Move interrupt-parent property to root node
There's no need to duplicate the interrupt-parent property in all DT
nodes as the kernel automatically walks parent nodes to find the
property. Specify it once in the root node only.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Grygorii Strashko [Mon, 12 May 2014 15:43:59 +0000 (11:43 -0400)]
ARM: dts: keystone-evm: add spi nor flash support
k2hk, k2e, k2l EVM board have the same Micron N25Q128A11
SPI NOR Flash installed on SPI0 bus.
The NOR Flash is splitted on two partistions:
partition@0
label = "u-boot-spl";
reg = <0x0 0x80000>;
partition@1
label = "misc";
reg = <0x80000 0xf80000>;
Hence, add SPI NOR Flash nodes to all k2hk, k2e, k2l EVM boards.
Hans de Goede [Mon, 12 May 2014 12:11:06 +0000 (14:11 +0200)]
ARM: dts: sun5i: Add new A10s r7 hdmi tv dongle board
The R7 tv-dongle is an A10s based hdmi tv dongle, with 1G RAM, 4G nand flash,
and rtl8189es sdio wifi. It has a standard male hdmi connector, an USB host
port using an USB-A receptacle and a micro-usb receptacle for both power
and USB OTG.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Sergei Shtylyov [Sat, 3 May 2014 17:04:34 +0000 (21:04 +0400)]
ARM: shmobile: henninger: add SDHI0/2 DT support
Define the Henninger board dependent part of the SDHI0/2 device nodes along with
the necessary voltage regulators (note that the Vcc regulators are dummy -- they
are required but don't actually exist on the board). Also, GPIOs have to be used
for the CD and WP signals due to the SDHI driver constraints...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Santosh Shilimkar [Mon, 24 Feb 2014 21:42:19 +0000 (16:42 -0500)]
ARM: dts: keystone: Update USB node for dma properties
Keystone supports dma-coherent on USB master and also needs
dma-ranges to specify the hardware alias memory range in which DMA
can be operational.
Cc: Russell King <linux@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Grygorii Strashko [Wed, 12 Feb 2014 17:20:16 +0000 (19:20 +0200)]
ARM: dts: keystone: Use dma-ranges property
The dma-ranges property has to be specified per bus and has format:
< DMA addr > - Base DMA address for Bus (Bus format 32-bits)
< CPU addr > - Corresponding base CPU address (CPU format 64-bits)
< DMA range size > - Size of supported DMA range
Cc: Russell King <linux@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
ARM: dts: keystone: add cell's information to spi nodes
SPI nodes should always have #address-cells and #size-cells defined,
otherwise warnings will be produced in case of adding any child
nodes to the SPI bus in DT:
Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc/spi@21000400/n25q128a11@0
Warning (avoid_default_addr_size): Relying on default #size-cells value for /soc/spi@21000400/n25q128a11@0
Hence, ensure that all SPIx nodes have #address-cells and #size-cells
properties defined.
ARM: dts: keystone: move i2c0 device node from SoC to board files
I2C devices are not the part of Keystone SoC and have to be
defined in board DTS files.
Hence, move i2c0 EEPROM device node from Keystone SoC to
k2hk, k2e, k2l EVM files as they all have similar EEPROM SoCs
installed.
ARM: dts: keystone: add cell's information to i2c nodes
I2C nodes should always have #address-cells and #size-cells defined,
otherwise warnings will be produced in case of adding child
nodes to the I2C bus in DT:
Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc/i2c@2530800/pca@20
Warning (avoid_default_addr_size): Relying on default #size-cells value for /soc/i2c@2530800/pca@20
Hence, ensure that all i2cX nodes have #address-cells and #size-cells
properties defined.
Lucas Stach [Mon, 14 Apr 2014 14:18:13 +0000 (16:18 +0200)]
ARM: dts: keystone: drop address and size cells from GIC node
This is likely a copy-and-paste error from the
ARM GIC documentation, that has already been fixed.
address-cells should have been set to 0, as with the size
cells. As having those properties set to 0 is the
same thing as not specifying them, drop them completely.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
ARM: socfpga: dts: Add div-reg to the main_pll clocks
The mpu_clk, main_clk, and dbg_base_clk outputs from the main PLL go through a
pre-divider. Update socfpga.dtsi to represent those dividers for these
clocks.
Re-use the "div-reg" property that was used for the socfpga-gate-clock as this
is the same thing. Also update the documentation.
Instead of having the documentation for the socfpga-reset controller in a
vendor specific directory, move it to the reset folder to all the other
reset drivers.
ARM: socfpga: dts: convert to preprocessor includes
Convert all socfpga DT files to the dtc preprocessor include syntax.
This allows to include header files in the devicetrees like other
SoC-types already do.
Chen-Yu Tsai [Fri, 2 May 2014 15:57:29 +0000 (17:57 +0200)]
ARM: dts: sun7i: Add basic support for the Cubietruck WiFi module
The CubieTruck has an AMPAK AP6210 WiFi+Bluetooth module. The WiFi
part is a BCM43362 IC connected to MMC3 in the A20 SoC via SDIO.
The IC also takes a power enable signal via GPIO.
The WiFi module supports out-of-band interrupt signaling via GPIO,
but this is not supported in this patch.
Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Olof Johansson [Mon, 5 May 2014 21:33:48 +0000 (14:33 -0700)]
Merge tag 'renesas-dt-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Merge "Renesas ARM Based SoC DT Updates for v3.16" from Simon Horman:
r8a7791 (R-Car M2) and r8a7790 (R-Car H2) SoCs
* Add MSIOF nodes and aliases
* Correct I2C clock parents
r8a7791 (R-Car M2) SoC
* Add EHCI MSTP clock
r8a7791 (R-Car M2) based Koelsch and r8a7790 (R-Car H2) based Lager boards
* Add MSIOF nodes
* Add gpio-keys support for SW2
* Enable I2C
* Enable Quad SPI transfers for the SPI FLASH
* Rename and lable spi to qspi, add spi0 alias
* Set ethernet PHY LED mode
r8a7779 (R-Car H1) and r8a7778 (R-Car M2) SoCs
* Improve and correct HSPI nodes
r8a7778 (R-Car M2) based Bock-W board
* Add SPI FLASH
r8a7740 (R-Mobile A1) SoC
* Use r8a7740 suffix for i2c, mmcif, fsi2 compat strings
r8a7740 (R-Mobile A1) based Armadillo800 EVA board
* Enable RTC
* Use KEY_* macros for gpio-keys
EMEV2 (Emma Mobile EV2) based kzm9g board
* Use KEY_* macros for gpio-keys
* tag 'renesas-dt-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (33 commits)
ARM: shmobile: armadillo-reference dts: Seiko Instruments, Inc is "sii"
ARM: shmobile: lager dts: Enable Quad SPI transfers for the SPI FLASH
ARM: shmobile: koelsch dts: Enable Quad SPI transfers for the SPI FLASH
ARM: shmobile: r8a7790: add IIC(B) cores to dtsi
ARM: shmobile: r8a7790: add IIC(B) clocks to dtsi
ARM: shmobile: r8a7790: add IIC0-2 clock macros
ARM: shmobile: r8a7791: Fix the I2C clocks parents in DT
ARM: shmobile: r8a7790: Fix the I2C clocks parents in DT
ARM: shmobile: lager: Correct setting of ethernet PHY LED mode
ARM: shmobile: armadillo-reference dts: enable RTC
ARM: shmobile: r8a7791: Add EHCI MSTP clock
ARM: shmobile: Use r8a7740 suffix for i2c, mmcif, fsi2 compat strings
ARM: shmobile: koelsch: activate i2c6 bus
ARM: shmobile: koelsch: make i2c2-pfc node unique
ARM: shmobile: r8a7791: add IIC(B) cores to dtsi
ARM: shmobile: r8a7791: add IIC(B) clocks to dtsi
ARM: shmobile: r8a7791: add IIC0/1 clock macros
ARM: shmobile: kzm9g-reference dts: Use KEY_* macros for gpio-keys
ARM: shmobile: armadillo-reference dts: Use KEY_* macros for gpio-keys
ARM: shmobile: koelsch: Set ethernet PHY LED mode
...
Olof Johansson [Mon, 5 May 2014 21:15:54 +0000 (14:15 -0700)]
Merge tag 'at91-dt' of git://github.com/at91linux/linux-at91 into next/dt
Merge "at91: DT for 3.16 #1" from Nicolas Ferre:
3.16: first DT series:
- more support for at91sam9rl and its associated EK board
- some improvements to at91sam9g45 (ADC, TS, PWM leds)
- addition of some missing pieces for describing audio
of SAMA5D3-EK in DT
* tag 'at91-dt' of git://github.com/at91linux/linux-at91:
ARM: at91: sama5d3: clock for ssc from rk pin
ARM: at91: sama5d3: add the missing property
ARM: at91: sama5d3: correct the sound compatible string
ARM: at91: sama5d3: disable sound by default
ARM: at91: sama5d3: add DMA property for SSC devices
ARM: at91/dt: at91sam9m10g45ek PWM leds polarity is inversed
ARM: at91/dt: at91sam9m10g45ek: add ADC and touchscreen support
ARM: at91/dt: sam9g45: improve ADC/touchscreen support
ARM: at91/dt: add peripherals to the at91sam9rlek board
ARM: at91/dt: sam9rl: add lcd, adc, usb gadget and pwm support
Hans de Goede [Fri, 2 May 2014 15:57:26 +0000 (17:57 +0200)]
ARM: dts: sun7i: Add mmc controller nodes
Add nodes for the 4 mmc controllers found on A20 SoCs to
arch/arm/boot/dts/sun7i-a20.dtsi.
Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Hans de Goede [Fri, 2 May 2014 15:57:25 +0000 (17:57 +0200)]
ARM: dts: sun6i: Add new sun6i-a31-m9 dts file for Mele M9
Add a new sun6i-a31-m9 dts file for the Mele M9 / Mele A1000G Quad. These
HTPCs use the same board in a different case, for more details see:
http://linux-sunxi.org/Mele_M9
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
David Lanzendörfer [Fri, 2 May 2014 15:57:21 +0000 (17:57 +0200)]
ARM: dts: sun5i: Add mmc controller nodes
Add nodes for the 3 mmc controllers found on A10s SoCs and for the 2 mmc
controllers found on A13 SoCs.
Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Hans de Goede [Fri, 2 May 2014 15:57:20 +0000 (17:57 +0200)]
ARM: dts: sun4i: Enable mmc controller on various A10 boards
Tested on a subset of these boards, for the others boards the settings match
the ones of the tested boards according to the original firmware fex files.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
David Lanzendörfer [Fri, 2 May 2014 15:57:18 +0000 (17:57 +0200)]
ARM: dts: sun4i: Add mmc controller nodes
Add nodes for the 4 mmc controllers found on A10 SoCs to
arch/arm/boot/dts/sun4i-a10.dtsi.
Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Sebastian Hesselbarth [Wed, 30 Apr 2014 12:56:41 +0000 (14:56 +0200)]
ARM: dts: kirkwood: set Guruplug ethernet PHY compatible
Ethernet PHY compatible shall be "ethernet-phy-ieee802.3-c22" and
"ethernet-phy-idAAAA.BBBB" if PHY OUI id is known. We know it for
the PHY found on Guruplug, so set it accordingly.
Sebastian Hesselbarth [Wed, 30 Apr 2014 12:56:40 +0000 (14:56 +0200)]
ARM: dts: kirkwood: set default pinctrl for I2C1 on 6282
Currently, the only 6282-based Kirkwood boards that use I2C1 are Openblocks
A6/A7. Both use the same default I2C1 pinctrl setting from kirkwood-6282.dtsi.
Move the pinctrl setting to the I2C1 node directly and put a note in front of
the corresponding pinctrl node to overwrite the setting on board level.
Sebastian Hesselbarth [Wed, 30 Apr 2014 12:56:39 +0000 (14:56 +0200)]
ARM: dts: kirkwood: set default pinctrl for I2C0
There is only one valid pinctrl setting for I2C0 on Kirkwood. Now that we
have the setting in the common SoC pinctrl, move it to the I2C0 controller
node directly and remove it from the individual boards.
While at it, also fix up status = "okay" to "ok" on one board's I2C0 node.
Sebastian Hesselbarth [Wed, 30 Apr 2014 12:56:38 +0000 (14:56 +0200)]
ARM: dts: kirkwood: set default pinctrl for NAND
There is only one valid pinctrl setting for NAND on Kirkwood. Now that we
have the setting in the common SoC pinctrl, move it to the NAND controller
node directly and remove it from the individual boards.
While at it, also fix up status = "okay" to "ok" on one board's NAND node.
Sebastian Hesselbarth [Wed, 30 Apr 2014 12:56:37 +0000 (14:56 +0200)]
ARM: dts: kirkwood: set default pinctrl for SPI0
Most Kirkwood boards use the default SPI0 pinctrl setting anyway. Add a
default pinctrl setting to the toplevel SoC SPI0 node and put a note
in front of the corresponding pinctrl node to overwrite the setting
on board level.
Currently, only T5325 is using a different setting and already
overwrites the corresponding pinctrl node.
Sebastian Hesselbarth [Wed, 30 Apr 2014 12:56:36 +0000 (14:56 +0200)]
ARM: dts: kirkwood: set default pinctrl for UART0/1
Most boards use the default UART0/1 pinctrl setting without RTS/CTS.
Add the pinctrl setting to the toplevel SoC UART nodes and put a note
in front of the corresponding pinctrl node to overwrite the setting
on board level. Currently, both boards using a different UART pinctrl
setting (Openblocks A6, A7) already overwrite the pinctrl node.
While at it, also fix up some status = "ok" to "okay" and again
whitespace issues on mplcec4 uart nodes.
Sebastian Hesselbarth [Wed, 30 Apr 2014 12:56:35 +0000 (14:56 +0200)]
ARM: dts: kirkwood: set default pinctrl for GBE1
On Kirkwood, there is only one valid pinctrl setting for GBE1. With
a common SoC pinctrl node, we can now set it in the node instead of
in each board file.
Sebastian Hesselbarth [Wed, 30 Apr 2014 12:56:33 +0000 (14:56 +0200)]
ARM: dts: kirkwood: add pinctrl node to common SoC include
All Kirkwood SoCs have their pinctrl registers at the same address.
Instead of replaying the same reg property on each SoC, have the
reg property set in the common SoC file already. This also allows
us to move common pinctrl settings to this node later on.
Sebastian Hesselbarth [Wed, 30 Apr 2014 12:56:31 +0000 (14:56 +0200)]
ARM: dts: kirkwood: remove clock-frequency properties from UART nodes
UART devices found on Kirkwood SoCs derive their baudrate from TCLK.
With proper clocks property in the SoCs serial node, boards do not
need to overwrite it anymore.
Remove the remaining clock-frequency property from all Kirkwood boards.
Sebastian Hesselbarth [Wed, 30 Apr 2014 12:56:30 +0000 (14:56 +0200)]
ARM: dts: kirkwood: add stdout-path property to all boards
ePAPR allows to reference the device used for console output by
stdout-path property. With node labels for Kirkwood UART0, now
reference it on all Kirkwood boards that already have ttyS0 in
their bootargs property.
While at it, fix some whitespace issues on mplcec4's chosen node
(there are more, but we only fix the chosen node now)
Linus Torvalds [Sun, 4 May 2014 21:34:50 +0000 (14:34 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"These are mostly arm64 fixes with an additional arm(64) platform fix
for the initialisation of vexpress clocks (the latter only affecting
arm64; the arch/arm64 code is SoC agnostic and does not rely on early
SoC-specific calls)
- vexpress platform clocks initialisation moved earlier following the
arm64 move of of_clk_init() call in a previous commit
- Default DMA ops changed to non-coherent to preserve compatibility
with 32-bit ARM DT files. The "dma-coherent" property can be used
to explicitly mark a device coherent. The Applied Micro DT file
has been updated to avoid DMA cache maintenance for the X-Gene SATA
controller (the only arm64 related driver with such assumption in
-rc mainline)
- Fixmap correction for earlyprintk
- kern_addr_valid() fix for huge pages"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
vexpress: Initialise the sysregs before setting up the clocks
arm64: Mark the Applied Micro X-Gene SATA controller as DMA coherent
arm64: Use bus notifiers to set per-device coherent DMA ops
arm64: Make default dma_ops to be noncoherent
arm64: fixmap: fix missing sub-page offset for earlyprintk
arm64: Fix for the arm64 kern_addr_valid() function
Linus Torvalds [Sun, 4 May 2014 21:31:51 +0000 (14:31 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is two patches both fixing bugs in drivers (virtio-scsi and
mpt2sas) causing an oops in certain circumstances"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
[SCSI] virtio-scsi: Skip setting affinity on uninitialized vq
[SCSI] mpt2sas: Don't disable device twice at suspend.
vexpress: Initialise the sysregs before setting up the clocks
Following arm64 commit bc3ee18a7a57 (arm64: init: Move of_clk_init to
time_init()), vexpress_osc_of_setup() is called via of_clk_init() long
before initcalls are issued. Initialising the vexpress oscillators
requires the vespress sysregs to be already initialised, so this patch
adds an explicit call to vexpress_sysreg_of_early_init() in vexpress
oscillator setup function.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Will Deacon <will.deacon@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Tested-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Pawel Moll <pawel.moll@arm.com> Cc: Mike Turquette <mturquette@linaro.org>
arm64: Use bus notifiers to set per-device coherent DMA ops
Recently, the default DMA ops have been changed to non-coherent for
alignment with 32-bit ARM platforms (and DT files). This patch adds bus
notifiers to be able to set the coherent DMA ops (with no cache
maintenance) for devices explicitly marked as coherent via the
"dma-coherent" DT property.