Thomas Gleixner [Tue, 5 Jun 2018 22:57:38 +0000 (00:57 +0200)]
x86/cpu/AMD: Evaluate smp_num_siblings early
To support force disabling of SMT it's required to know the number of
thread siblings early. amd_get_topology() cannot be called before the APIC
driver is selected, so split out the part which initializes
smp_num_siblings and invoke it from amd_early_init().
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Conflicts:
arch/x86/kernel/cpu/amd.c
Contextual
Borislav Petkov [Fri, 15 Jun 2018 18:48:39 +0000 (20:48 +0200)]
x86/CPU/AMD: Do not check CPUID max ext level before parsing SMP info
Old code used to check whether CPUID ext max level is >= 0x80000008 because
that last leaf contains the number of cores of the physical CPU. The three
functions called there now do not depend on that leaf anymore so the check
can go.
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Conflicts:
arch/x86/kernel/cpu/amd.c
Contextual: we only have two functions
Thomas Gleixner [Tue, 5 Jun 2018 23:00:55 +0000 (01:00 +0200)]
x86/cpu/intel: Evaluate smp_num_siblings early
Make use of the new early detection function to initialize smp_num_siblings
on the boot cpu before the MP-Table or ACPI/MADT scan happens. That's
required for force disabling SMT.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org>
Orabug: 28220674
CVE: CVE-2018-3620
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Conflicts:
arch/x86/kernel/cpu/intel.c
Contextual
Thomas Gleixner [Tue, 5 Jun 2018 22:55:39 +0000 (00:55 +0200)]
x86/cpu/topology: Provide detect_extended_topology_early()
To support force disabling of SMT it's required to know the number of
thread siblings early. detect_extended_topology() cannot be called before
the APIC driver is selected, so split out the part which initializes
smp_num_siblings.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org>
Orabug: 28220674
CVE: CVE-2018-3620
Thomas Gleixner [Tue, 5 Jun 2018 22:53:57 +0000 (00:53 +0200)]
x86/cpu/common: Provide detect_ht_early()
To support force disabling of SMT it's required to know the number of
thread siblings early. detect_ht() cannot be called before the APIC driver
is selected, so split out the part which initializes smp_num_siblings.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org>
Orabug: 28220674
CVE: CVE-2018-3620
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Thomas Gleixner [Tue, 29 May 2018 15:48:27 +0000 (17:48 +0200)]
cpu/hotplug: Provide knobs to control SMT
Provide a command line and a sysfs knob to control SMT.
The command line options are:
'nosmt': Enumerate secondary threads, but do not online them
'nosmt=force': Ignore secondary threads completely during enumeration
via MP table and ACPI/MADT.
The sysfs control file has the following states (read/write):
'on': SMT is enabled. Secondary threads can be freely onlined
'off': SMT is disabled. Secondary threads, even if enumerated
cannot be onlined
'forceoff': SMT is permanentely disabled. Writes to the control
file are rejected.
'notsupported': SMT is not supported by the CPU
The command line option 'nosmt' sets the sysfs control to 'off'. This
can be changed to 'on' to reenable SMT during runtime.
The command line option 'nosmt=force' sets the sysfs control to
'forceoff'. This cannot be changed during runtime.
When SMT is 'on' and the control file is changed to 'off' then all online
secondary threads are offlined and attempts to online a secondary thread
later on are rejected.
When SMT is 'off' and the control file is changed to 'on' then secondary
threads can be onlined again. The 'off' -> 'on' transition does not
automatically online the secondary threads.
When the control file is set to 'forceoff', the behaviour is the same as
setting it to 'off', but the operation is irreversible and later writes to
the control file are rejected.
When the control status is 'notsupported' then writes to the control file
are rejected.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org>
Orabug: 28220674
CVE: CVE-2018-3620
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Conflicts:
Documentation/admin-guide/kernel-parameters.txt
arch/Kconfig
arch/x86/Kconfig
kernel/cpu.c
All contextual, but in kernel-cpu.c it was a little more complicated as we did
not have cpuhp_sysfs_init and I created a device_initcall for
cpu_smt_state_init.
Andi Kleen [Fri, 20 May 2016 00:09:55 +0000 (17:09 -0700)]
x86/topology: Add topology_max_smt_threads()
For SMT specific workarounds it is useful to know if SMT is active
on any online CPU in the system. This currently requires a loop
over all online CPUs.
Add a global variable that is updated with the maximum number
of smt threads on any CPU on online/offline, and use it for
topology_max_smt_threads()
The single call is easier to use than a loop.
Not exported to user space because user space already can use
the existing sibling interfaces to find this out.
Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Cc: jolsa@kernel.org Link: http://lkml.kernel.org/r/1463703002-19686-2-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Orabug: 28220674
CVE: CVE-2018-3620
This patch was backported as a dependency, was not part of the original L1TF
patch list.
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Conflicts:
arch/x86/include/asm/topology.h
Contextual.
For smpboot.c we modified topology_sibling_cpumask with topology_thread_cpumask.
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Conflicts:
kernel/cpu.c
Contextual and we do not have cpuhp_state target.
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Conflicts:
arch/x86/kernel/smpboot.c
Contextual
Thomas Gleixner [Tue, 29 May 2018 15:50:22 +0000 (17:50 +0200)]
x86/smp: Provide topology_is_primary_thread()
If the CPU is supporting SMT then the primary thread can be found by
checking the lower APIC ID bits for zero. smp_num_siblings is used to build
the mask for the APIC ID bits which need to be taken into account.
This uses the MPTABLE or ACPI/MADT supplied APIC ID, which can be different
than the initial APIC ID in CPUID. But according to AMD the lower bits have
to be consistent. Intel gave a tentative confirmation as well.
Preparatory patch to support disabling SMT at boot/runtime.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org>
Orabug: 28220674
CVE: CVE-2018-3620
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Conflicts:
arch/x86/kernel/cpu/bugs.c
Different filename.
Andi Klein [Wed, 13 Jun 2018 22:48:28 +0000 (15:48 -0700)]
x86/speculation/l1tf: Limit swap file size to MAX_PA/2
For the L1TF workaround its necessary to limit the swap file size to below
MAX_PA/2, so that the higher bits of the swap offset inverted never point
to valid memory.
Add a mechanism for the architecture to override the swap file size check
in swapfile.c and add a x86 specific max swapfile check function that
enforces that limit.
The check is only enabled if the CPU is vulnerable to L1TF.
In VMs with 42bit MAX_PA the typical limit is 2TB now, on a native system
with 46bit PA it is 32TB. The limit is only per individual swap file, so
it's always possible to exceed these limits with multiple swap files or
partitions.
Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Dave Hansen <dave.hansen@intel.com>
Orabug: 28220674
CVE: CVE-2018-3620
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Andi Klein [Wed, 13 Jun 2018 22:48:27 +0000 (15:48 -0700)]
x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings
For L1TF PROT_NONE mappings are protected by inverting the PFN in the page
table entry. This sets the high bits in the CPU's address space, thus
making sure to point to not point an unmapped entry to valid cached memory.
Some server system BIOSes put the MMIO mappings high up in the physical
address space. If such an high mapping was mapped to unprivileged users
they could attack low memory by setting such a mapping to PROT_NONE. This
could happen through a special device driver which is not access
protected. Normal /dev/mem is of course access protected.
To avoid this forbid PROT_NONE mappings or mprotect for high MMIO mappings.
Valid page mappings are allowed because the system is then unsafe anyways.
It's not expected that users commonly use PROT_NONE on MMIO. But to
minimize any impact this is only enforced if the mapping actually refers to
a high MMIO address (defined as the MAX_PA-1 bit being set), and also skip
the check for root.
For mmaps this is straight forward and can be handled in vm_insert_pfn and
in remap_pfn_range().
For mprotect it's a bit trickier. At the point where the actual PTEs are
accessed a lot of state has been changed and it would be difficult to undo
on an error. Since this is a uncommon case use a separate early page talk
walk pass for MMIO PROT_NONE mappings that checks for this condition
early. For non MMIO and non PROT_NONE there are no changes.
Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Dave Hansen <dave.hansen@intel.com>
Orabug: 28220674
CVE: CVE-2018-3620
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Conflicts:
include/asm-generic/pgtable.h
mm/memory.c
pgtable.h: contextual, not the same functions
memory.c: different content of the modified functions
Andi Klein [Wed, 13 Jun 2018 22:48:26 +0000 (15:48 -0700)]
x86/speculation/l1tf: Add sysfs reporting for l1tf
L1TF core kernel workarounds are cheap and normally always enabled, However
they still should be reported in sysfs if the system is vulnerable or
mitigated. Add the necessary CPU feature/bug bits.
- Extend the existing checks for Meltdowns to determine if the system is
vulnerable. All CPUs which are not vulnerable to Meltdown are also not
vulnerable to L1TF
- Check for 32bit non PAE and emit a warning as there is no practical way
for mitigation due to the limited physical address bits
- If the system has more than MAX_PA/2 physical memory the invert page
workarounds don't protect the system against the L1TF attack anymore,
because an inverted physical address will also point to valid
memory. Print a warning in this case and report that the system is
vulnerable.
Add a function which returns the PFN limit for the L1TF mitigation, which
will be used in follow up patches for sanity and range checks.
[ tglx: Renamed the CPU feature bit to L1TF_PTEINV ]
Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Dave Hansen <dave.hansen@intel.com>
Orabug: 28220674
CVE: CVE-2018-3620
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Conflicts for UEK5:
arch/x86/include/asm/cpufeatures.h
arch/x86/kernel/cpu/bugs.c
[
cpufeatures.h: we do not have that entry free. use another
bugs.c: we have in place the ibrs logic, compared to upstream
]
Conflicts for UEK4:
arch/x86/include/asm/cpufeatures.h
arch/x86/kernel/cpu/bugs.c
arch/x86/kernel/cpu/common.c
cpufeatures.h: different file name and also moved the feature to word 2. We also removed word 2 as we won't use Transmeta on UEK4
bugs.c: different file name (bugs_64.c)
common.c: contextual (cpu_set_bug_bits didn't have __init)
Andi Klein [Wed, 13 Jun 2018 22:48:25 +0000 (15:48 -0700)]
x86/speculation/l1tf: Make sure the first page is always reserved
The L1TF workaround doesn't make any attempt to mitigate speculate accesses
to the first physical page for zeroed PTEs. Normally it only contains some
data from the early real mode BIOS.
It's not entirely clear that the first page is reserved in all
configurations, so add an extra reservation call to make sure it is really
reserved. In most configurations (e.g. with the standard reservations)
it's likely a nop.
Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Dave Hansen <dave.hansen@intel.com>
Orabug: 28220674
CVE: CVE-2018-3620
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Andi Klein [Wed, 13 Jun 2018 22:48:24 +0000 (15:48 -0700)]
x86/speculation/l1tf: Protect PROT_NONE PTEs against speculation
When PTEs are set to PROT_NONE the kernel just clears the Present bit and
preserves the PFN, which creates attack surface for L1TF speculation
speculation attacks.
This is important inside guests, because L1TF speculation bypasses physical
page remapping. While the host has its own migitations preventing leaking
data from other VMs into the guest, this would still risk leaking the wrong
page inside the current guest.
This uses the same technique as Linus' swap entry patch: while an entry is
is in PROTNONE state invert the complete PFN part part of it. This ensures
that the the highest bit will point to non existing memory.
The invert is done by pte/pmd_modify and pfn/pmd/pud_pte for PROTNONE and
pte/pmd/pud_pfn undo it.
This assume that no code path touches the PFN part of a PTE directly
without using these primitives.
This doesn't handle the case that MMIO is on the top of the CPU physical
memory. If such an MMIO region was exposed by an unpriviledged driver for
mmap it would be possible to attack some real memory. However this
situation is all rather unlikely.
For 32bit non PAE the inversion is not done because there are really not
enough bits to protect anything.
Q: Why does the guest need to be protected when the HyperVisor already has
L1TF mitigations?
A: Here's an example:
Physical pages 1 2 get mapped into a guest as
GPA 1 -> PA 2
GPA 2 -> PA 1
through EPT.
The L1TF speculation ignores the EPT remapping.
Now the guest kernel maps GPA 1 to process A and GPA 2 to process B, and
they belong to different users and should be isolated.
A sets the GPA 1 PA 2 PTE to PROT_NONE to bypass the EPT remapping and
gets read access to the underlying physical page. Which in this case
points to PA 2, so it can read process B's data, if it happened to be in
L1, so isolation inside the guest is broken.
There's nothing the hypervisor can do about this. This mitigation has to
be done in the guest itself.
[ tglx: Massaged changelog ]
Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Dave Hansen <dave.hansen@intel.com>
Orabug: 28220674
CVE: CVE-2018-3620
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Conflicts:
arch/x86/include/asm/pgtable.h
[We do not have the wrapper check_pgprot (which was just adding some debug
config and calls massage_pgprot). Just use massage_pgprot.]
Conflicts:
arch/x86/include/asm/pgtable-3level.h
arch/x86/include/asm/pgtable.h
arch/x86/include/asm/pgtable_64.h
pgtable-3level.h: contextual
pgtable.h: contextual as we didn't have some of the functions
pgtable_64.h: contextual
Linus Torvalds [Wed, 13 Jun 2018 22:48:23 +0000 (15:48 -0700)]
x86/speculation/l1tf: Protect swap entries against L1TF
With L1 terminal fault the CPU speculates into unmapped PTEs, and resulting
side effects allow to read the memory the PTE is pointing too, if its
values are still in the L1 cache.
For swapped out pages Linux uses unmapped PTEs and stores a swap entry into
them.
To protect against L1TF it must be ensured that the swap entry is not
pointing to valid memory, which requires setting higher bits (between bit
36 and bit 45) that are inside the CPUs physical address space, but outside
any real memory.
To do this invert the offset to make sure the higher bits are always set,
as long as the swap file is not too big.
Note there is no workaround for 32bit !PAE, or on systems which have more
than MAX_PA/2 worth of memory. The later case is very unlikely to happen on
real systems.
[AK: updated description and minor tweaks by. Split out from the original
patch ]
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Conflicts:
arch/x86/include/asm/pgtable_64.h
Do not have comment with " * | TYPE (59-63) | ~OFFSET (9-58) |0|0|X|X| X| X|X|SD|0| <- swp entry".
Linus Torvalds [Wed, 13 Jun 2018 22:48:22 +0000 (15:48 -0700)]
x86/speculation/l1tf: Change order of offset/type in swap entry
If pages are swapped out, the swap entry is stored in the corresponding
PTE, which has the Present bit cleared. CPUs vulnerable to L1TF speculate
on PTE entries which have the present bit set and would treat the swap
entry as phsyical address (PFN). To mitigate that the upper bits of the PTE
must be set so the PTE points to non existent memory.
The swap entry stores the type and the offset of a swapped out page in the
PTE. type is stored in bit 9-13 and offset in bit 14-63. The hardware
ignores the bits beyond the phsyical address space limit, so to make the
mitigation effective its required to start 'offset' at the lowest possible
bit so that even large swap offsets do not reach into the physical address
space limit bits.
Move offset to bit 9-58 and type to bit 59-63 which are the bits that
hardware generally doesn't care about.
That, in turn, means that if you on desktop chip with only 40 bits of
physical addressing, now that the offset starts at bit 9, there needs to be
30 bits of offset actually *in use* until bit 39 ends up being set, which
means when inverted it will again point into existing memory.
So that's 4 terabyte of swap space (because the offset is counted in pages,
so 30 bits of offset is 42 bits of actual coverage). With bigger physical
addressing, that obviously grows further, until the limit of the offset is
hit (at 50 bits of offset - 62 bits of actual swap file coverage).
This is a preparatory change for the actual swap entry inversion to protect
against L1TF.
[ AK: Updated description and minor tweaks. Split into two parts ]
[ tglx: Massaged changelog ]
L1 Terminal Fault (L1TF) is a speculation related vulnerability. The CPU
speculates on PTE entries which do not have the PRESENT bit set, if the
content of the resulting physical address is available in the L1D cache.
The OS side mitigation makes sure that a !PRESENT PTE entry points to a
physical address outside the actually existing and cachable memory
space. This is achieved by inverting the upper bits of the PTE. Due to the
address space limitations this only works for 64bit and 32bit PAE kernels,
but not for 32bit non PAE.
This mitigation applies to both host and guest kernels, but in case of a
64bit host (hypervisor) and a 32bit PAE guest, inverting the upper bits of
the PAE address space (44bit) is not enough if the host has more than 43
bits of populated memory address space, because the speculation treats the
PTE content as a physical host address bypassing EPT.
The host (hypervisor) protects itself against the guest by flushing L1D as
needed, but pages inside the guest are not protected against attacks from
other processes inside the same guest.
For the guest the inverted PTE mask has to match the host to provide the
full protection for all pages the host could possibly map into the
guest. The hosts populated address space is not known to the guest, so the
mask must cover the possible maximal host address space, i.e. 52 bit.
On 32bit PAE the maximum PTE mask is currently set to 44 bit because that
is the limit imposed by 32bit unsigned long PFNs in the VMs. This limits
the mask to be below what the host could possible use for physical pages.
The L1TF PROT_NONE protection code uses the PTE masks to determine which
bits to invert to make sure the higher bits are set for unmapped entries to
prevent L1TF speculation attacks against EPT inside guests.
In order to invert all bits that could be used by the host, increase
__PHYSICAL_PAGE_SHIFT to 52 to match 64bit.
The real limit for a 32bit PAE kernel is still 44 bits because all Linux
PTEs are created from unsigned long PFNs, so they cannot be higher than 44
bits on a 32bit kernel. So these extra PFN bits should be never set. The
only users of this macro are using it to look at PTEs, so it's safe.
[ tglx: Massaged changelog ]
Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Dave Hansen <dave.hansen@intel.com>
Orabug: 28220674
CVE: CVE-2018-3620
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Craig Bergstrom [Wed, 15 Nov 2017 22:29:51 +0000 (15:29 -0700)]
x86/mm: Limit mmap() of /dev/mem to valid physical addresses
One thing /dev/mem access APIs should verify is that there's no way
that excessively large pfn's can leak into the high bits of the
page table entry.
In particular, if people can use "very large physical page addresses"
through /dev/mem to set the bits past bit 58 - SOFTW4 and permission
key bits and NX bit, that could *really* confuse the kernel.
We had an earlier attempt:
ce56a86e2ade ("x86/mm: Limit mmap() of /dev/mem to valid physical addresses")
... which turned out to be too restrictive (breaking mem=... bootups for example) and
had to be reverted in:
90edaac62729 ("Revert "x86/mm: Limit mmap() of /dev/mem to valid physical addresses"")
This v2 attempt modifies the original patch and makes sure that mmap(/dev/mem)
limits the pfns so that it at least fits in the actual pteval_t architecturally:
- Make sure mmap_mem() actually validates that the offset fits in phys_addr_t
( This may be indirectly true due to some other check, but it's not
entirely obvious. )
- Change valid_mmap_phys_addr_range() to just use phys_addr_valid()
on the top byte
( Top byte is sufficient, because mmap_mem() has already checked that
it cannot wrap. )
- Add a few comments about what the valid_phys_addr_range() vs.
valid_mmap_phys_addr_range() difference is.
Signed-off-by: Craig Bergstrom <craigb@google.com>
[ Fixed the checks and added comments. ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[ Collected the discussion and patches into a commit. ] Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sander Eikelenboom <linux@eikelenboom.it> Cc: Sean Young <sean@mess.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/CA+55aFyEcOMb657vWSmrM13OxmHxC-XxeBmNis=DwVvpJUOogQ@mail.gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Orabug: 28220674
CVE: CVE-2018-3620
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Conflicts:
drivers/char/mem.c
Contextual: we have another structure. Just ditch that check.
Kirill A. Shutemov [Wed, 15 Nov 2017 14:36:06 +0000 (17:36 +0300)]
x86/mm: Prevent non-MAP_FIXED mapping across DEFAULT_MAP_WINDOW border
In case of 5-level paging, the kernel does not place any mapping above
47-bit, unless userspace explicitly asks for it.
Userspace can request an allocation from the full address space by
specifying the mmap address hint above 47-bit.
Nicholas noticed that the current implementation violates this interface:
If user space requests a mapping at the end of the 47-bit address space
with a length which causes the mapping to cross the 47-bit border
(DEFAULT_MAP_WINDOW), then the vma is partially in the address space
below and above.
Sanity check the mmap address hint so that start and end of the resulting
vma are on the same side of the 47-bit border. If that's not the case fall
back to the code path which ignores the address hint and allocate from the
regular address space below 47-bit.
To make the checks consistent, mask out the address hints lower bits
(either PAGE_MASK or huge_page_mask()) instead of using ALIGN() which can
push them up to the next boundary.
[ tglx: Moved the address check to a function and massaged comment and
changelog ]
Reported-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: linux-mm@kvack.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lkml.kernel.org/r/20171115143607.81541-1-kirill.shutemov@linux.intel.com
Orabug: 28220674
CVE: CVE-2018-3620
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Conflicts:
arch/x86/include/asm/elf.h
Contextual: we do not have the rest of the functions nearby
Also we do not have DEFAULT_MAP_WINDOW, we used TASK_SIZE_MAX.
x86/speculation: Support per-process SSBD with IBRS
Currently per-process SSBD can't be used with IBRS because both SSBD
and IBRS have to concurrently modify the spec_ctrl state which is globally
stored across all cpus. As a consequence, when using IBRS, Speculative
Store Bypass is disabled for userspace and it can't be used per-process
with prctl.
Commit fabdd62357ac ("x86/speculation: Implement per-cpu IBRS control")
has implemented per-cpu IBRS control and a similar change is needed to
maintain part of the spec_ctrl state (x86_spec_ctrl_priv) per-cpu too.
Then spec_ctrl state will be maintained per-cpu and per-process SSBD
can be used with IBRS.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
(cherry picked from UEK5 commit 9275aeff3b17bf85c7fe99d98d73b69628c14796)
[Backport: assembly code changes in spec_ctrl.h are similar but the
code is organized slightly differently on UEK5 and UEK4. On UEK5,
changes are directly in assembly macros (.macro). On UEK4, changes
are in preprocessor macros (#define) which are used by assembly macros.]
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
The dom0 panic would not panic if commit 7fc30809bfa8 ("xen-swiotlb: fix
the check condition for xen_swiotlb_free_coherent") is reverted. It is not
clear if the issue is due to this commit or the issue is just revealed by
this commit. This patch is temporarily reverted and will be merged again
once the root cause is identified.
The dom0 panic always because the page table entry is not set correctly,
e.g., the pte write bit is not set, or the pte is 0. This might be
directly/indirectly related to the patch.
There are usually warnings as below before the panic:
(XEN) mm.c:2560:d0 Bad type (saw 2400000000000001 != exp 7000000000000000) for mfn 447f42a (pfn 407a72)
(XEN) mm.c:986:d0 Could not get page type PGT_writable_page
(XEN) mm.c:1038:d0 Error getting mfn 447f42a (pfn 407a72) from L1 entry 800000447f42a063 for l1e_owner=0, pg_owner=0
(XEN) mm.c:2560:d0 Bad type (saw 1400000000000001 != exp 7000000000000000) for mfn 447f42b (pfn 407a73)
(XEN) mm.c:986:d0 Could not get page type PGT_writable_page
(XEN) mm.c:1038:d0 Error getting mfn 447f42b (pfn 407a73) from L1 entry 800000447f42b063 for l1e_owner=0, pg_owner=0
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Acked-by: Joe Jin <joe.jin@oracle.com> Reviewed-by: John Sobecki <john.sobecki@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Alexandre Chartre [Mon, 25 Jun 2018 09:45:16 +0000 (11:45 +0200)]
x86/speculation: Implement per-cpu IBRS control
If a system is booted with non-IBRS microcode, starts a microcode update
which enables IBRS, flags IBRS as supported, then an NMI is taken on a CPU
that hasn't actually received the update, we get a #GP since the SPEC_CTRL
MSR will get frobbed on the unsupported CPU anyway.
IBRS usage is now defined globally as well as per-cpu. The boot cpu defines
the initial IBRS usage, then each cpu defines its own per-cpu IBRS usage
based on the global IBRS uage and its cpu capabilities.
[Backport: backport includes part of UEK5 commit 5055b50f67b59e
("x86/topology: Avoid wasting 128k for package id array") to track when
cpu data are initialized.]
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Hans Westgaard Ry [Fri, 1 Jun 2018 10:24:40 +0000 (12:24 +0200)]
IB/mad: Use ID allocator routines to allocate agent number
The agent TID is a 64 bit value split in two dwords. The least
significant dword is the TID running counter. The most significant
dword is the agent number. In the CX-3 shared port model, the mlx4
driver uses the most significant byte of the agent number to store the
slave number, making agent numbers greater and equal to 2^24 (3 bytes)
unusable. The current codebase uses a variable which is incremented
for each new agent number giving too large agent numbers over time.
The IDA set of functions are used instead of the simple counter
approach. This allows re-use of agent numbers.
The signature of the bug is a MAD layer that stops working and the
console is flooded with messages like:
mlx4_ib: egress mad has non-null tid msb:1 class:4 slave:0
Signed-off-by: Hans Westgaard Ry <hans.westgaard.ry@oracle.com> Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com> Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Sebastian Andrzej Siewior [Thu, 10 Nov 2016 17:44:45 +0000 (18:44 +0100)]
x86/mcheck: Reorganize the hotplug callbacks
Initially I wanted to remove mcheck_cpu_init() from identify_cpu() and let it
become an independent early hotplug callback. The main problem here was that
the init on the boot CPU may happen too late
(device_initcall_sync(mcheck_init_device)) and nobody wanted to risk receiving
and MCE event at boot time leading to a shutdown (if the MCE feature is not yet
enabled).
Here is attempt two: the timming stays as-is but the ordering of the functions
is changed:
- mcheck_cpu_init() (which is run from identify_cpu()) will setup the timer
struct but won't fire the timer. This is moved to CPU_ONLINE since its
cleanup part is in CPU_DOWN_PREPARE. So if it is okay to stop the timer early
in the shutdown phase, it should be okay to start it late in the bring up phase.
- CPU_DOWN_PREPARE disables the MCE feature flags for !INTEL CPUs in
mce_disable_cpu(). If a failure occures it would be re-enabled on all vendor
CPUs (including Intel where it was not disabled during shutdown). To keep this
working I am moving it to CPU_ONLINE. smp_call_function_single() is dropped
beause the notifier runs nowdays on the target CPU.
- CPU_ONLINE is invoking mce_device_create() + mce_threshold_create_device()
but its cleanup part is in CPU_DEAD (mce_threshold_remove_device() and
mce_device_remove()). In order to keep this symmetrical I am moving the clean
up from CPU_DEAD to CPU_DOWN_PREPARE.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Borislav Petkov <bp@alien8.de> Cc: Tony Luck <tony.luck@intel.com> Cc: rt@linutronix.de Cc: linux-edac@vger.kernel.org Link: http://lkml.kernel.org/r/20161110174447.11848-6-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Orabug: 28387566
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Conflicts:
arch/x86/kernel/cpu/mcheck/mce.c
In this cherry-pick we preserved all the functions that were used in UEK4 with
the new logic (didn't make sense to backport all the patches that were also
modifying the interfaces for various reasons not related to this warning). So
we have:
- setup_timer instead of setup_pinned_timer (in UEK4 we do not have this interface)
- mce_{disable|reenable}_cpu we are calling it using smp_call_function_single, not directly
- threshold_cpu_callback instead of mce_threshold_remove_device
Sabrina Dubroca [Tue, 15 Nov 2016 09:39:03 +0000 (10:39 +0100)]
rtnetlink: fix rtnl_vfinfo_size
The size reported by rtnl_vfinfo_size doesn't match the space used by
rtnl_fill_vfinfo.
rtnl_vfinfo_size currently doesn't account for the nest attributes
used by statistics (added in commit 3b766cd83232), nor for struct
ifla_vf_tx_rate (since commit ed616689a3d9, which added ifla_vf_rate
to the dump without removing ifla_vf_tx_rate, but replaced
ifla_vf_tx_rate with ifla_vf_rate in the size computation).
Fixes: ed616689a3d9 ("net-next:v4: Add support to configure SR-IOV VF minimum and maximum Tx rate through ip tool") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Orabug: 27998927
(cherry picked from commit 7e75f74a171a8146cc3ee92d5562878b40c25fb5) Signed-off-by: Divya Indi <divya.indi@oracle.com> Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Conflicts:
net/core/rtnetlink.c
(Precedes commits that added VF stats, VF trust, vlan info)
Zhu Yanjun [Sat, 19 May 2018 11:55:49 +0000 (07:55 -0400)]
rds: IB: avoid migration to port that is down
When rds makes failback, it will migrate to a new ib device after
several seconds delays. But in the delay, the target ib is possible
to be down. So it is necessary to check the target ib state.
The following is an example.
"
...
May 11 10:37:23 kernel: mlx4_core 0000:03:00.0: mlx4_ib: Port 2 logical link is down
May 11 10:37:23 kernel: RDS/IP: IP 192.168.10.2 migrated from ib1 to ib0:P02
May 11 10:38:18 kernel: mlx4_core 0000:03:00.0: mlx4_ib: Port 2 logical link is up
May 11 10:38:23 kernel: mlx4_core 0000:03:00.0: mlx4_ib: Port 2 logical link is down
May 11 10:38:28 kernel: RDS/IP: IP 192.168.10.2 migrated from ib0:P02 to ib1
...
"
When ib1 is up, failback is in process. But this failback has several
seconds delay. In this delay, ib1 is down. Finally rds migrates to an
ib device that is down.
This is due to a race condition between rds_ib_cm_connect_complete()
trying to post a recv (using QP) and rds_ib_conn_path_shutdown
destroying the QP and zeroing it. By waiting and reserving the
RDS_RECV_REFILL bit before calling shutdown we avoid the problem.
Adding path-transition of CONNECTING to DISCONNECTING for
completeness.
Signed-off-by: Hans Westgaard Ry <hans.westgaard.ry@oracle.com> Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
When IB port link up/down too frequently, the following will occur.
"
16:57:08 kernel: mlx5_core 0000:af:00.1 enp175s0f1: Link up
16:57:08 kernel: RDS/IB: PORT-EVENT: port active, PORT:
mlx5_0/port_2/enp175s0f1 : port state transition to UP
(portlayers 0x7)
16:57:08 kernel: RDS/IB: NET-EVENT: NETDEV-CHANGE, PORT
mlx5_0/port_2/enp175s0f1 : port state transition NONE -
port retained in state UP (portlayers 0x7)
16:57:13 kernel: mlx5_core 0000:af:00.1 enp175s0f1: Link down
16:57:13 kernel: RDS/IB: PORT-EVENT: port error, PORT:
mlx5_0/port_2/enp175s0f1 : port state transition to DOWN
(portlayers 0x4)
16:57:13 kernel: RDS/IB: NET-EVENT: NETDEV-CHANGE, PORT
mlx5_0/port_2/enp175s0f1 : port state transition NONE -
port retained in state DOWN (portlayers 0x4)
16:57:13 kernel: RDS/IB: Address already exist
16:57:17 kernel: mlx5_core 0000:af:00.1 enp175s0f1: Link up
16:57:17 kernel: RDS/IB: PORT-EVENT: port active, PORT:
mlx5_0/port_2/enp175s0f1 : port state transition to UP
(portlayers 0x7)
16:57:17 kernel: RDS/IB: NET-EVENT: NETDEV-CHANGE, PORT
mlx5_0/port_2/enp175s0f1 : port state transition NONE -
port retained in state UP (portlayers 0x7)
16:57:18 kernel: RDS/IB: IPv4 172.16.2.52 migrated from enp175s0f0
(port 1) to enp175s0f1 (port 2)
"
From the above, rds_ib_addr_exist is called to check ip address. If
exists, the function goes to the end directly while the ret is not set.
This is not reasonable. This will make some global variables error.
Mihai Carabas [Fri, 29 Jun 2018 09:13:41 +0000 (12:13 +0300)]
fs: proc: array.c: fix Speculation_Store_Bypass print format
This patch fixes commit id f590427c8b01298b416f043107e654918107c579 While
backporting, we introduce a \n in front of Speculation_Store_Bypass ending up
with a suplimentary newline which is affecting different tools (like iotop):
Seccomp: 0
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: John Haxby <john.haxby@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Dave Chinner [Mon, 15 Feb 2016 06:23:12 +0000 (17:23 +1100)]
xfs: don't chain ioends during writepage submission
Currently we can build a long ioend chain during ->writepages that
gets attached to the writepage context. IO submission only then
occurs when we finish all the writepage processing. This means we
can have many ioends allocated and pending, and this violates the
mempool guarantees that we need to give about forwards progress.
i.e. we really should only have one ioend being built at a time,
otherwise we may drain the mempool trying to allocate a new ioend
and that blocks submission, completion and freeing of ioends that
are already in progress.
To prevent this situation from happening, we need to submit ioends
for IO as soon as they are ready for dispatch rather than queuing
them for later submission. This means the ioends have bios built
immediately and they get queued on any plug that is current active.
Hence if we schedule away from writeback, the ioends that have been
built will make forwards progress due to the plug flushing on
context switch. This will also prevent context switches from
creating unnecessary IO submission latency.
We can't completely avoid having nested IO allocation - when we have
a block size smaller than a page size, we still need to hold the
ioend submission until after we have marked the current page dirty.
Hence we may need multiple ioends to be held while the current page
is completely mapped and made ready for IO dispatch. We cannot avoid
this problem - the current code already has this ioend chaining
within a page so we can mostly ignore that it occurs.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
(cherry picked from commit e10de3723c53378e7cf441529f563c316fdc0dd3)
Dave Chinner [Mon, 15 Feb 2016 06:21:37 +0000 (17:21 +1100)]
xfs: factor mapping out of xfs_do_writepage
Separate out the bufferhead based mapping from the writepage code so
that we have a clear separation of the page operations and the
bufferhead state.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
(cherry picked from commit bfce7d2e2d5ee05e9d465888905c66a70a9c243c)
Dave Chinner [Mon, 15 Feb 2016 06:21:31 +0000 (17:21 +1100)]
xfs: xfs_cluster_write is redundant
xfs_cluster_write() is not necessary now that xfs_vm_writepages()
aggregates writepage calls across a single mapping. This means we no
longer need to do page lookups in xfs_cluster_write, so writeback
only needs to look up th epage cache once per page being written.
This also removes a large amount of mostly duplicate code between
xfs_do_writepage() and xfs_convert_page().
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
(cherry picked from commit ad68972acb82c3e8bba316d542ab204984cb1f1c)
Dave Chinner [Mon, 15 Feb 2016 06:21:19 +0000 (17:21 +1100)]
xfs: Introduce writeback context for writepages
xfs_vm_writepages() calls generic_writepages to writeback a range of
a file, but then xfs_vm_writepage() clusters pages itself as it does
not have any context it can pass between->writepage calls from
__write_cache_pages().
Introduce a writeback context for xfs_vm_writepages() and call
__write_cache_pages directly with our own writepage callback so that
we can pass that context to each writepage invocation. This
encapsulates the current mapping, whether it is valid or not, the
current ioend and it's IO type and the ioend chain being built.
This requires us to move the ioend submission up to the level where
the writepage context is declared. This does mean we do not submit
IO until we packaged the entire writeback range, but with the block
plugging in the writepages call this is the way IO is submitted,
anyway.
It also means that we need to handle discontiguous page ranges. If
the pages sent down by write_cache_pages to the writepage callback
are discontiguous, we need to detect this and put each discontiguous
page range into individual ioends. This is needed to ensure that the
ioend accurately represents the range of the file that it covers so
that file size updates during IO completion set the size correctly.
Failure to take into account the discontiguous ranges results in
files being too small when writeback patterns are non-sequential.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
(cherry picked from commit fbcc025613590d7b1d15521555dcc6393a148a6b) Signed-off-by: Brian Maly <brian.maly@oracle.com>
Conflicts:
fs/xfs/xfs_aops.c
Dave Chinner [Mon, 15 Feb 2016 06:21:12 +0000 (17:21 +1100)]
xfs: remove xfs_cancel_ioend
We currently have code to cancel ioends being built because we
change bufferhead state as we build the ioend. On error, this needs
to be unwound and so we have cancelling code that walks the buffers
on the ioend chain and undoes these state changes.
However, the IO submission path already handles state changes for
buffers when a submission error occurs, so we don't really need a
separate cancel function to do this - we can simply submit the
ioend chain with the specific error and it will be cancelled rather
than submitted.
Hence we can remove the explicit cancel code and just rely on
submission to deal with the error correctly.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
(cherry picked from commit 150d5be09ce49a9bed6feb7b7dc4e5ae188778ec)
Dave Chinner [Mon, 15 Feb 2016 06:20:50 +0000 (17:20 +1100)]
xfs: remove nonblocking mode from xfs_vm_writepage
Remove the nonblocking optimisation done for mapping lookups during
writeback. It's not clear that leaving a hole in the writeback range
just because we couldn't get a lock is really a win, as it makes us
do another small random IO later on rather than a large sequential
IO now.
As this gets in the way of sane error handling later on, just remove
for the moment and we can re-introduce an equivalent optimisation in
future if we see problems due to extent map lock contention.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
(cherry picked from commit 988ef927926aa3481cbf144f235c0cefd7deb9e4)
rds: tcp: cancel all worker threads before shutting down socket
We could end up executing rds_conn_shutdown before the rds_recv_worker
thread, then rds_conn_shutdown -> rds_tcp_conn_shutdown can do a
sock_release and set sock->sk to null, which may interleave in bad
ways with rds_recv_worker, e.g., it could result in:
cancel send/recv worker threads before shutting down connection.
Also, do not enqueue any new shutdown workq items when the connection is
shutting down (this may happen for rds-tcp in softirq mode, if a FIN
or CLOSE is received while the modules is in the middle of an unload)
Dan Carpenter [Sat, 18 Sep 2010 13:42:25 +0000 (13:42 +0000)]
rds: signedness bug
In the original code if the copy_from_user() fails in rds_rdma_pages()
then the error handling fails and we get a stack trace from kmalloc().
<amended commit message by hbugge>
This bug was originally fixed in v2.6.36-rc5. However, commit edc31ebe9e36 ("[patch1/3] Merge for Mellanox OFED R2, 0080 release")
re-introduces the bug, most probably because the Mellanox OFED didn't
have the upstream fix.
So, this bug has been present since v2.6.39-400.9.0 and is present in
all our releases from uek2 to uek5.
</amended>
Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 9b9d2e00bfa592aceda7b43da76c670df61faa97)
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Fixes: edc31ebe9e36d87dcd08931784a49c2e75eed359 Reviewed-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
block: update integrity interval after queue limits change
A disk's integrity interval is calculated based on the logical block
size of it's queue. If the queue or it's block size is not set, default
512 integrity interval is set.
The issue is that the integrity interval of dm device is set before it's
queue limits are set and it is not updated once the appropriate queue
limits are set.
So, dm integrity interval is set to 512 by default. This causes
following integrity mismatch errors for devices with logical block size
!=512.
This further leads to dm paths not being setup correctly.
Solution is to set integrity interval all the time in
blk_integrity_register() according to the logical block size of the
queue. Once logical block size of the queue is updated, the integrity
interval will be set correctly on the next blk_integrity_register().
This issue does not occur in UEK5 or upstream as they contain the
following
commits which resolve the current and couple of other issues as well.
These when backported to UEK4 cause KABI breakage. To work around it,
the current patch resolves this issue.
Signed-off-by: Ritika Srivastava <ritika.srivastava@oracle.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Alexey Kodanev [Tue, 6 Mar 2018 19:57:01 +0000 (22:57 +0300)]
dccp: check sk for closed state in dccp_sendmsg()
dccp_disconnect() sets 'dp->dccps_hc_tx_ccid' tx handler to NULL,
therefore if DCCP socket is disconnected and dccp_sendmsg() is
called after it, it will cause a NULL pointer dereference in
dccp_write_xmit().
This crash and the reproducer was reported by syzbot. Looks like
it is reproduced if commit 69c64866ce07 ("dccp: CVE-2017-8824:
use-after-free in DCCP code") is applied.
Reported-by: syzbot+f99ab3887ab65d70f816@syzkaller.appspotmail.com Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 67f93df79aeefc3add4e4b31a752600f834236e2)
Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Håkon Bugge [Thu, 21 Jun 2018 11:06:30 +0000 (13:06 +0200)]
net/rds: Implement ARP flushing correctly
If a remote peer has moved its IP address from one port to the other,
the local node may have an incorrect ARP entry in its cache. During
connection management, we will then get back a route-error-event from
the CM.
Current code attempts to flush the ARP entry from the cache. However,
1) it does not check for return values, 2) it does not supply the
device name, 3) it does not iterate over all possible device names,
and 4) its doesn't supply the correct flags.
Due to 2-4 above, the flushing doesn't work.
This commit fixes this.
On a system with a single CX-3 and 16 VFs, fail-over just after a
fail-back is reduced from ~60 seconds down to ~10 seconds with the fix
(1156 RDS connections).
V1 -> V2:
- Move NOTE section down as suggested by Santosh
- Remove unnecessary initialization of ret
- Fix a nit in the commit message (2-4 instead of 1-4)
- Use pr_err() instead of printk() as suggested by Yuval
- Use sizeof(*r) as suggested by Yuval
NOTE:
* The uek-4-QU7 version of this bug has an approved exception from
Greg Marsden, that it can be merged first in uek-4-QU7, before
uek5/master-next.
Håkon Bugge [Tue, 26 Jun 2018 14:14:06 +0000 (16:14 +0200)]
net/rds: Fix incorrect bigger vs. smaller IP address check
In commit d8bd5dfb5de4 ("net/rds: use one sided reconnection during a
race"), the function rds_addr_cmp() was called without comparing the
return value to less-than or bigger-than-equal to zero.
This led to a situation where both peers thought they were the winner,
and consequently, racing RDS connections didn't form or took a long
time to form.
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Suggested-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Fixes: d8bd5dfb5de4 ("net/rds: use one sided reconnection during a race") Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
(cherry picked from commit 653ccd08be01f82c6129f5060bd8110489aca110
repo UEK/linux-hbugge-public.git)
Signed-off-by: Brian Maly <brian.maly@oracle.com>
Conflicts:
* Had to "rename" the SHA of the Fixes: uek-5-master commit to
the correct one for uek-4.1-qu7.
In dlm_init_lockres() we access and modify res->tracking and
dlm->tracking_list without holding dlm->track_lock. This can cause list
corruptions and can end up in kernel panic.
Fix this by locking res->tracking and dlm->tracking_list with
dlm->track_lock instead of dlm->spinlock.
Signed-off-by: Ashish Samant <ashish.samant@oracle.com> CC: stable@vger.kernel.org Reviewed-by: Changwei Ge <ge.changwei@h3c.com> Acked-by: Joseph Qi <jiangqi903@gmail.com> Acked-by: Jun Piao <piaojun@huawei.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
The 'dir' parameter in xfrm_migrate() is a user-controlled byte which is used
as an array index. This can lead to an out-of-bound access, kernel lockup and
DoS. Add a check for the 'dir' value.
This fixes CVE-2017-11600.
References: https://bugzilla.redhat.com/show_bug.cgi?id=1474928 Fixes: 80c9abaabf42 ("[XFRM]: Extension for dynamic update of endpoint address(es)") Cc: <stable@vger.kernel.org> # v2.6.21-rc1 Reported-by: "bo Zhang" <zhangbo5891001@gmail.com> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
(cherry picked from commit 7bab09631c2a303f87a7eb7e3d69e888673b9b7e) Signed-off-by: Brian Maly <brian.maly@oracle.com> Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com>
In the case that compat_get_bitmap fails we do not want to copy the
bitmap to the user as it will contain uninitialized stack data and leak
sensitive data.
Signed-off-by: Chris Salls <salls@cs.ucsb.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit cf01fb9985e8deb25ccf0ea54d916b8871ae0e62) Signed-off-by: Brian Maly <brian.maly@oracle.com>
Mathias Nyman [Mon, 14 May 2018 08:57:23 +0000 (11:57 +0300)]
xhci: Fix USB3 NULL pointer dereference at logical disconnect.
Hub driver will try to disable a USB3 device twice at logical disconnect,
racing with xhci_free_dev() callback from the first port disable.
This can be triggered with "udisksctl power-off --block-device <disk>"
or by writing "1" to the "remove" sysfs file for a USB3 device
in 4.17-rc4.
USB3 devices don't have a similar disabled link state as USB2 devices,
and use a U3 suspended link state instead. In this state the port
is still enabled and connected.
hub_port_connect() first disconnects the device, then later it notices
that device is still enabled (due to U3 states) it will try to disable
the port again (set to U3).
The xhci_free_dev() called during device disable is async, so checking
for existing xhci->devs[i] when setting link state to U3 the second time
was successful, even if device was being freed.
The regression was caused by, and whole thing revealed by,
Commit 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device")
which sets xhci->devs[i]->udev to NULL before xhci_virt_dev() returned.
and causes a NULL pointer dereference the second time we try to set U3.
Fix this by checking xhci->devs[i]->udev exists before setting link state.
The original patch went to stable so this fix needs to be applied there as
well.
Fixes: 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device") Cc: <stable@vger.kernel.org> Reported-by: Jordan Glover <Golden_Miller83@protonmail.ch> Tested-by: Jordan Glover <Golden_Miller83@protonmail.ch> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 2278446e2b7cd33ad894b32e7eb63afc7db6c86e)
Orabug: 27426023 Signed-off-by: Brian Maly <brian.maly@oracle.com>
Conflicts:
Hand merge the change since multiple patches have been added to
xhci-hub.c since this cherry pick became available.
Signed-off-by: Joe Moriarty <joe.moriarty@oracle.com> Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Eric Dumazet [Thu, 31 May 2018 12:52:24 +0000 (05:52 -0700)]
mlx4_core: restore optimal ICM memory allocation
Commit 1383cb8103bb ("mlx4_core: allocate ICM memory in page size chunks")
brought two regressions caught in our regression suite.
The big one is an additional cost of 256 bytes of overhead per 4096 bytes,
or 6.25 % which is unacceptable since ICM can be pretty large.
This comes from having to allocate one struct mlx4_icm_chunk (256 bytes)
per MLX4_TABLE_CHUNK, which the buggy commit shrank to 4KB
(instead of prior 256KB)
Note that mlx4_alloc_icm() is already able to try high order allocations
and fallback to low-order allocations under high memory pressure.
Most of these allocations happen right after boot time, when we get
plenty of non fragmented memory, there is really no point being so
pessimistic and break huge pages into order-0 ones just for fun.
We only have to tweak gfp_mask a bit, to help falling back faster,
without risking OOM killings.
Second regression is an KASAN fault, that will need further investigations.
Fixes: 1383cb8103bb ("mlx4_core: allocate ICM memory in page size chunks") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Tariq Toukan <tariqt@mellanox.com> Cc: John Sperbeck <jsperbeck@google.com> Cc: Tarick Bedeir <tarick@google.com> Cc: Qing Huang <qing.huang@oracle.com> Cc: Daniel Jurgens <danielj@mellanox.com> Cc: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry-picked from upstream commit 885892fb378dc096693557ba4f2b875188619b36)
Signed-off-by: Brian Maly <brian.maly@oracle.com>
Conflicts:
replaced __GFP_DIRECT_RECLAIM with __GFP_WAIT due to kernel difference
between UEK4 and upstream
Signed-off-by: Qing Huang <qing.huang@oracle.com> Tested-by: June Wang <june.wang@oracle.com> Tested-by: Rose Wang <rose.wang@oracle.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Qing Huang [Wed, 23 May 2018 23:22:46 +0000 (16:22 -0700)]
mlx4_core: allocate ICM memory in page size chunks
When a system is under memory presure (high usage with fragments),
the original 256KB ICM chunk allocations will likely trigger kernel
memory management to enter slow path doing memory compact/migration
ops in order to complete high order memory allocations.
When that happens, user processes calling uverb APIs may get stuck
for more than 120s easily even though there are a lot of free pages
in smaller chunks available in the system.
Syslog:
...
Dec 10 09:04:51 slcc03db02 kernel: [397078.572732] INFO: task
oracle_205573_e:205573 blocked for more than 120 seconds.
...
With 4KB ICM chunk size on x86_64 arch, the above issue is fixed.
However in order to support smaller ICM chunk size, we need to fix
another issue in large size kcalloc allocations.
E.g.
Setting log_num_mtt=30 requires 1G mtt entries. With the 4KB ICM chunk
size, each ICM chunk can only hold 512 mtt entries (8 bytes for each mtt
entry). So we need a 16MB allocation for a table->icm pointer array to
hold 2M pointers which can easily cause kcalloc to fail.
The solution is to use kvzalloc to replace kcalloc which will fall back
to vmalloc automatically if kmalloc fails.
Signed-off-by: Qing Huang <qing.huang@oracle.com> Acked-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry-picked from upstream commit 1383cb8103bb166e50cbab1543bb3b5118fccf82)
Signed-off-by: Qing Huang <qing.huang@oracle.com> Tested-by: June Wang <june.wang@oracle.com> Tested-by: Rose Wang <rose.wang@oracle.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Sowmini Varadhan [Thu, 18 Jan 2018 21:11:07 +0000 (13:11 -0800)]
rds: tcp: compute m_ack_seq as offset from ->write_seq
rds-tcp uses m_ack_seq to track the tcp ack# that indicates
that the peer has received a rds_message. The m_ack_seq is
used in rds_tcp_is_acked() to figure out when it is safe to
drop the rds_message from the RDS retransmit queue.
The m_ack_seq must be calculated as an offset from the right
edge of the in-flight tcp buffer, i.e., it should be based on
the ->write_seq, not the ->snd_nxt.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit b589513e6354a5fd6934823b7fd66bffad41137a)
Signed-off-by: Hans Westgaard Ry <hans.westgaard.ry@oracle.com> Reviewed-by: Qing Huang <qing.huang@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Currently in ext4_valid_block_bitmap() we expect the bitmap to be
positioned anywhere between 0 and s_blocksize clusters, but that's
wrong because the bitmap can be placed anywhere in the block group. This
causes false positives when validating bitmaps on perfectly valid file
system layouts. Fix it by checking whether the bitmap is within the group
boundary.
The problem can be reproduced using the following
mkfs -t ext3 -E stride=256 /dev/vdb1
mount /dev/vdb1 /mnt/test
cd /mnt/test
wget https://cdn.kernel.org/pub/linux/kernel/v4.x/linux-4.16.3.tar.xz
tar xf linux-4.16.3.tar.xz
Orabug: 28167032 Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Håkon Bugge [Mon, 18 Jun 2018 11:39:14 +0000 (13:39 +0200)]
net/rds: Fix bug in failover_group parsing
When supplying a module parameter value for the fail-over group as:
ib0,ib1;ib2,ib3;ib4,ib5;ib6,ib7;ib8,ib9
rdmaip / rds_rdma is unable to parse it correctly. Based on debug
prints, it does:
lab38 kernel: RDS/IB: ib0 is designated group 1
lab38 kernel: RDS/IB: ib1 is designated group 1
lab38 kernel: RDS/IB: ib2 is designated group 2
(no more prints).
This implies, that for Xn-8 systems, fail-over will not be distributed
correctly. We see:
lab38 kernel: RDS/IP: IP 192.2.23.100 migrated from ib0 to ib1:P01
lab38 kernel: RDS/IP: IP 192.2.23.102 migrated from ib2 to ib1:P03
lab38 kernel: RDS/IP: IP 192.2.23.104 migrated from ib4 to ib3:P05
lab38 kernel: RDS/IP: IP 192.2.23.106 migrated from ib6 to ib3:P07
lab38 kernel: RDS/IP: IP 192.2.23.108 migrated from ib8 to ib3:P09
That is, all fail-overs except for ib0 are migrated to ib3.
This commit fixes this. The following values for the module parameter
have been tested (in user space):
Alexey Kodanev [Fri, 9 Feb 2018 14:35:23 +0000 (17:35 +0300)]
sctp: verify size of a new chunk in _sctp_make_chunk()
When SCTP makes INIT or INIT_ACK packet the total chunk length
can exceed SCTP_MAX_CHUNK_LEN which leads to kernel panic when
transmitting these packets, e.g. the crash on sending INIT_ACK:
Here the chunk size for INIT_ACK packet becomes too big, mostly
because of the state cookie (INIT packet has large size with
many address parameters), plus additional server parameters.
Later this chunk causes the panic in skb_put_data():
'nskb' (head skb) was previously allocated with packet->size
from u16 'chunk->chunk_hdr->length'.
As suggested by Marcelo we should check the chunk's length in
_sctp_make_chunk() before trying to allocate skb for it and
discard a chunk if its size bigger than SCTP_MAX_CHUNK_LEN.
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leinter@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 07f2c7ab6f8d0a7e7c5764c4e6cc9c52951b9d9c)
Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Conflicts:
net/sctp/sm_make_chunk.c
Denys provided an awesome KASAN report pointing to an use
after free in xt_TCPMSS
I have provided three patches to fix this issue, either in xt_TCPMSS or
in xt_tcpudp.c. It seems xt_TCPMSS patch has the smallest possible
impact.
Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Denys Fedoryshchenko <nuclearcat@nuclearcat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
(cherry picked from commit 2638fd0f92d4397884fd991d8f4925cb3f081901) Signed-off-by: Brian Maly <brian.maly@oracle.com>
(Cherry-picked from commit dd83c161fbcc) Signed-off-by: mridula shastry <mridula.c.shastry@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Jacob Wen [Fri, 1 Jun 2018 13:54:26 +0000 (21:54 +0800)]
crypto: drbg - fix shadow copy of the test buffer
drbg->test_data.list is expected to be empty.
tmp->test_data.list should be empty(head->next == head) as well,
otherwise the specified test entropy will not be used in drbg_seed.
Fixes: b07ca65d8 ("crypto: drbg - Convert to new rng interface")
Orabug: 28078838
Signed-off-by: Jacob Wen <jian.w.wen@oracle.com> Reviewed-by: Brian Maly <brian.maly@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Tom Herbert [Tue, 15 Dec 2015 23:41:37 +0000 (15:41 -0800)]
netlink: add a start callback for starting a netlink dump
The start callback allows the caller to set up a context for the
dump callbacks. Presumably, the context can then be destroyed in
the done callback.
Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit fc9e50f5a5a4e1fa9ba2756f745a13e693cf6a06)
Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Herbert Xu [Thu, 19 Oct 2017 12:51:10 +0000 (20:51 +0800)]
ipsec: Fix aborted xfrm policy dump crash
An independent security researcher, Mohamed Ghannam, has reported
this vulnerability to Beyond Security's SecuriTeam Secure Disclosure
program.
The xfrm_dump_policy_done function expects xfrm_dump_policy to
have been called at least once or it will crash. This can be
triggered if a dump fails because the target socket's receive
buffer is full.
This patch fixes it by using the cb->start mechanism to ensure that
the initialisation is always done regardless of the buffer situation.
Fixes: 12a169e7d8f4 ("ipsec: Put dumpers on the dump list") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
(cherry picked from commit 1137b5e2529a8f5ca8ee709288ecba3e68044df2)
Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Allen Pais <allen.pais@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Wei Lin Guay [Mon, 19 Mar 2018 13:26:34 +0000 (14:26 +0100)]
net/rds: prevent RDS connections using stale ARP entries
Active bonding fallback is an asynchronous event in the cluster. Thus,
there is a potential race where a host has sent out a CM REQ, using a
wrong remote gid, before IP migration happens at the remote end. The
side effect of this issue causes RDS connections only use one physical
IB port. When that particular IB port goes down, it causes send
completion error on those RDS connections and eventually increases the
brownout time.
To avoid this phenomenon, RDS has to reject all incoming CM REQ after
RDMA_CM_EVENT_DISCONNECTED or RDMA_CM_EVENT_ADDR_CHANGE events until
route resolution has been performed locally. By doing so, we can
ensure that the gratituos ARPs are sent to the remote end and RDS
connections are established based on the correct ARP entries.
Wei Lin Guay [Fri, 25 Aug 2017 09:13:51 +0000 (11:13 +0200)]
net/rds: Avoid stalled connection due to CM REQ retries
RDS drops a connection and destroys its cm_id once a CM REJ is sent. In a
congested fabric, there is a race where a remote node receives a CM REJ
after CM has retried another CM REQ. In this scenario, the cm_id that sends
the CM REQ is no longer exists even though the remote end might respond
with a CM REP, and wait for an incoming CM RTU. This RDS connection
establishment is stuck until the connection is destroyed after the CM
timeout. As a result, this leads to a very long brownout time. Thus, this
patch adds a mechanism to detect a rejected CM REQ and rejects all the
subsequent CM REQ that are retried by the CM.
Wei Lin Guay [Fri, 9 Jun 2017 12:20:56 +0000 (14:20 +0200)]
net/rds: use one sided reconnection during a race
This commit reverts commit 812c02791add ("RDS: restore the exponential
back-off scheme") to use one sided reconnection when a race is
detected. When a race is detected, the active side reconnects as fast
as possible, whereas the passive side wait for 15s.
This reverts commit fde8284e499b ("Revert "net/rds: Revert "RDS: add
reconnect retry scheme for stalled connections""").
Here is the commit message for the first revert:
<quote>
Commit 54312602fb26 ("RDS: add reconnect retry scheme for stalled
connections") introduces the rds_reconnect_timeout to retry the
connection establishment after sysctl_reconnect_retry_ms (default is
1000ms). Nevertheless, this proactive mechanism is overkilled and it
is causing long brownout time in the virtualized environment. In
short, below are the justifications why said commit is reverted.
a) The retry counter starts ticking after RDS received an ADDR_CHANGE
event. After receiving an ADDR_CHANGE event, RDS needs to perform shutdown
via shutdown_worker. Then, initiate a new connection via connect_worker.
Eventually, a CM REQ is only sent out after RDS received
RDMA_CM_EVENT_ADDR_RESOLVED and RDMA_CM_EVENT_ROUTE_RESOLVED events. If the
retry is made to cater for stalled connection due to missing CM messages,
the retry should only happen after a CM REQ is sent. With the current
retry scheme (and with the default 1000 ms) that happens after ADDR_CHANGE
event, it introduces congestion in the single threaded workqueue.
b) Assuming that we modify the retry counter to start ticking after a
CM REQ message is sent out. By introducing another retry timeout, it
complicates the system tuning. Why? First, the
sysctl_reconnect_retry_ms relies on the underlying
cma_response_timeout. Any modication of cma_response_timeout requires
to tune sysctl_reconnect_retry_ms. Second, it is hard to find a
universal timing that fits all configurations (bare-metal,
virtualized, mixed environment, and homo/heterogenous system).
</quote>
Signed-off-by: Brian Maly <brian.maly@oracle.com>
Conflicts:
net/rds/ib_cm.c
net/rds/rdma_transport.c
net/rds/threads.c
Joe Jin [Thu, 17 May 2018 19:33:28 +0000 (12:33 -0700)]
xen-swiotlb: fix the check condition for xen_swiotlb_free_coherent
When run raidconfig from Dom0 we found that the Xen DMA heap is reduced,
but Dom Heap is increased by the same size. Tracing raidconfig we found
that the related ioctl() in megaraid_sas will call dma_alloc_coherent()
to apply memory. If the memory allocated by Dom0 is not in the DMA area,
it will exchange memory with Xen to meet the requiment. Later drivers
call dma_free_coherent() to free the memory, on xen_swiotlb_free_coherent()
the check condition (dev_addr + size - 1 <= dma_mask) is always false,
it prevents calling xen_destroy_contiguous_region() to return the memory
to the Xen DMA heap.
This issue introduced by commit 6810df88dcfc2 "xen-swiotlb: When doing
coherent alloc/dealloc check before swizzling the MFNs.".
Signed-off-by: Joe Jin <joe.jin@oracle.com> Tested-by: John Sobecki <john.sobecki@oracle.com> Reviewed-by: Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Wei Lin Guay [Mon, 30 Oct 2017 09:45:56 +0000 (10:45 +0100)]
net/rds: Assign the correct service level
Commit 2bbf6158c769 ("net/rds: remove the RDS specific path record
caching") has changed the service level (SL) to TOS mapping to be
1:1. Nevertheless, it has assigned the SL to be a 8-bit value even though
IB specification section 7.7.3 mentioned that the SL is only a 4-bit
field. Thus, this patch assigns the SL correctly.
Nicholas Bellinger [Tue, 4 Oct 2016 23:37:05 +0000 (16:37 -0700)]
target: Re-add missing SCF_ACK_KREF assignment in v4.1.y
This patch fixes a regression in >= v4.1.y code where the original
SCF_ACK_KREF assignment in target_get_sess_cmd() was dropped upstream
in commit 054922bb, but the series for addressing TMR ABORT_TASK +
LUN_RESET with fabric session reinstatement in commit febe562c20 still
depends on this code in transport_cmd_finish_abort().
The regression manifests itself as a se_cmd->cmd_kref +1 leak, where
ABORT_TASK + LUN_RESET can hang indefinately for a specific I_T session
for drivers using SCF_ACK_KREF, resulting in hung kthreads.
Nicholas Bellinger [Tue, 12 Jan 2016 05:31:09 +0000 (21:31 -0800)]
target: Fix LUN_RESET active I/O handling for ACK_KREF
This patch fixes a NULL pointer se_cmd->cmd_kref < 0
refcount bug during TMR LUN_RESET with active se_cmd
I/O, that can be triggered during se_cmd descriptor
shutdown + release via core_tmr_drain_state_list() code.
To address this bug, add common __target_check_io_state()
helper for ABORT_TASK + LUN_RESET w/ CMD_T_COMPLETE
checking, and set CMD_T_ABORTED + obtain ->cmd_kref for
both cases ahead of last target_put_sess_cmd() after
TFO->aborted_task() -> transport_cmd_finish_abort()
callback has completed.
It also introduces SCF_ACK_KREF to determine when
transport_cmd_finish_abort() needs to drop the second
extra reference, ahead of calling target_put_sess_cmd()
for the final kref_put(&se_cmd->cmd_kref).
It also updates transport_cmd_check_stop() to avoid
holding se_cmd->t_state_lock while dropping se_cmd
device state via target_remove_from_state_list(), now
that core_tmr_drain_state_list() is holding the
se_device lock while checking se_cmd state from
within TMR logic.
Finally, move transport_put_cmd() release of SGL +
TMR + extended CDB memory into target_free_cmd_mem()
in order to avoid potential resource leaks in TMR
ABORT_TASK + LUN_RESET code-paths. Also update
target_release_cmd_kref() accordingly.
Reviewed-by: Quinn Tran <quinn.tran@qlogic.com> Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Andy Grover <agrover@redhat.com> Cc: Mike Christie <mchristi@redhat.com> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Orabug: 27781132
Bart Van Assche [Thu, 22 Oct 2015 22:57:04 +0000 (15:57 -0700)]
target: Invoke release_cmd() callback without holding a spinlock
This patch fixes the following kernel warning because it avoids that
IRQs are disabled while ft_release_cmd() is invoked (fc_seq_set_resp()
invokes spin_unlock_bh()):
Konrad Rzeszutek Wilk [Thu, 24 May 2018 14:32:57 +0000 (10:32 -0400)]
x86/bugs: Report properly retpoline+IBRS
If the retpoline fallback is activated we want to properly
report that both of them are on.
This involves a bit of dance where we do not change
the spectre_v2_enabled ever again. But we still need the logic
to detect whether IBRS + retpoline is enabled. To make it
easier we change the name of the function to be more obvious.
OraBug: 27897282 Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: John Haxby <john.haxby@oracle.com> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
---
v2: Remove the pr_err('Spectre v2 mitigation IBRS is set.\n')
Make the retpoline_only_enabled optimized.
Signed-off-by: Brian Maly <brian.maly@oracle.com>
Conflicts:
arch/x86/kernel/cpu/spec_ctrl.c
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Reviewed-by: John Haxby <john.haxby@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
This patch uses the original value of nr_events (from userspace) to
increment aio-nr and count against aio-max-nr, which resolves those.
Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Reported-by: Lekshmi C. Pillai <lekshmi.cpillai@in.ibm.com> Tested-by: Lekshmi C. Pillai <lekshmi.cpillai@in.ibm.com> Tested-by: Paul Nguyen <nguyenp@us.ibm.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Orabug: 28079082
(cherry picked from commit 2a8a98673c13cb2a61a6476153acf8344adfa992) Signed-off-by: Rajan Shanmugavelu <rajan.shanmugavelu@oracle.com> Reviewed-by: Calum Mackay <calum.mackay@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Rajan Shanmugavelu [Mon, 4 Jun 2018 22:22:43 +0000 (15:22 -0700)]
qla2xxx: Enable buffer boundary check when DIF bundling is on.
The Qlogic firmware requires the upper 32-bit of dma buffer address
not flipped, this happens when DIF bundling is enabled and the SGE
buffer address plus length changes the upper 32-bit address, a local
buffer is used for DIF information.
Co-authored-by: Giri Malavali <giridhar.malavali@cavium.com> Co-authored-by: Joe Carnuccio <joe.carnuccio@cavium.com> Reviewed-by: Giri Malavali <giridhar.malavali@cavium.com> Signed-off-by: Rajan Shanmugavelu <rajan.shanmugavelu@oracle.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Mihai Carabas [Tue, 29 May 2018 09:32:58 +0000 (12:32 +0300)]
x86/bugs/IBRS: Keep SSBD mitigation in effect if spectre_v2=ibrs is selected
From: Boris Ostrovsky <boris.ostrovsky@oracle.com>
If the system admins picks to disable memory disambiguation at bootup
(spec_store_bypass_disable=on) and enable IBRS (spectre_v2=ibrs) we
end up briefly at bootup disabling memory disambiguation and then
IBRS SPEC_CTRL kicks - and memory disambiguation is enabled back again.
The logic is there for the 'auto' case, but we missed it for
the other ones. Lets fix it up.
Fixes: 89981b51b9240ec16e506304990ce2311e93285b ("x86/speculation: Add prctl for Speculative Store Bypass mitigation") Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Wang Long [Thu, 21 May 2015 16:34:22 +0000 (09:34 -0700)]
fs/pstore: update the backend parameter in pstore module
This patch update the module parameter backend, so it is visible
through /sys/module/pstore/parameters/backend.
For example:
if pstore backend is ramoops, with this patch:
# cat /sys/module/pstore/parameters/backend
ramoops
and without this patch:
# cat /sys/module/pstore/parameters/backend
(null)
Signed-off-by: Wang Long <long.wanglong@huawei.com> Acked-by: Mark Salyzyn <salyzyn@android.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
(cherry picked from commit 42222c2a5d5da7fe4839491d5c44034f40761071)
Orabug: 27994372 Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
This is more or less a revert of commit 2c82878b0cb3 ("KVM: VMX: require
virtual NMI support", 2017-03-27); it turns out that Core 2 Duo machines
only had virtual NMIs in some SKUs.
The revert is not trivial because in the meanwhile there have been several
fixes to nested NMI injection. Therefore, the entire vNMI state is moved
to struct loaded_vmcs.
Another change compared to before the patch is a simplification here:
if (unlikely(!cpu_has_virtual_nmis() && vmx->soft_vnmi_blocked &&
!(is_guest_mode(vcpu) && nested_cpu_has_virtual_nmis(
get_vmcs12(vcpu))))) {
The final condition here is always true (because nested_cpu_has_virtual_nmis
is always false) and is removed.
Fixes: 2c82878b0cb38fd516fd612c67852a6bbf282003 Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1490803 Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
(cherry picked from commit 8a1b43922d0d1279e7936ba85c4c2a870403c95f)
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Conflicts:
arch/x86/kvm/vmx.c
Conflicts are due to the fact that a large number of patches affecting this
area of the code have not been ported to UEK4-QU7. Portions of the
cherry-picked patch had to be manually inserted in the correct places, but
no logical changes were required.
Milan Broz [Tue, 6 Jun 2017 07:07:01 +0000 (09:07 +0200)]
dm crypt: add big-endian variant of plain64 IV
The big-endian IV (plain64be) is needed to map images from extracted
disks that are used in some external (on-chip FDE) disk encryption
drives, e.g.: data recovery from external USB/SATA drives that support
"internal" encryption.
Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
(cherry picked from commit 7e3fd855ad66ffc0dd926911da23dd21e59f9462) Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Tested-by: Qiang Wang <qiang.z.wang@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Orabug: 28043932 Signed-off-by: Brian Maly <brian.maly@oracle.com>
Conflicts:
drivers/md/dm-crypt.c
Konrad Rzeszutek Wilk [Thu, 17 May 2018 03:18:09 +0000 (23:18 -0400)]
x86/bugs: Rename SSBD_NO to SSB_NO
The "336996 Speculative Execution Side Channel Mitigations" from
May defines this as SSB_NO, hence lets sync-up.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Orabug: 28063992
CVE: CVE-2018-3639
(cherry picked from commit 240da953) Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Conflicts:
arch/x86/include/asm/msr-index.h
[msr-index.h: different file location]
Tom Lendacky [Thu, 10 May 2018 20:06:39 +0000 (22:06 +0200)]
KVM: SVM: Implement VIRT_SPEC_CTRL support for SSBD
Expose the new virtualized architectural mechanism, VIRT_SSBD, for using
speculative store bypass disable (SSBD) under SVM. This will allow guests
to use SSBD on hardware that uses non-architectural mechanisms for enabling
SSBD.
[ tglx: Folded the migration fixup from Paolo Bonzini ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Orabug: 28063992
CVE: CVE-2018-3639
(cherry picked from commit bc226f07) Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Conflicts:
arch/x86/include/asm/kvm_host.h
arch/x86/kernel/cpu/common.c
arch/x86/kvm/cpuid.c
arch/x86/kvm/svm.c
arch/x86/kvm/vmx.c
arch/x86/kvm/x86.c
[
We did not have cpu_has_high_real_mode_segbase entry at all.
Also msr_info is not in this patchset, I will take care of it
in Orabug: 28069548 in a future patchset.
]
Thomas Gleixner [Thu, 10 May 2018 18:42:48 +0000 (20:42 +0200)]
x86/speculation, KVM: Implement support for VIRT_SPEC_CTRL/LS_CFG
Add the necessary logic for supporting the emulated VIRT_SPEC_CTRL MSR to
x86_virt_spec_ctrl(). If either X86_FEATURE_LS_CFG_SSBD or
X86_FEATURE_VIRT_SPEC_CTRL is set then use the new guest_virt_spec_ctrl
argument to check whether the state must be modified on the host. The
update reuses speculative_store_bypass_update() so the ZEN-specific sibling
coordination can be reused.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Orabug: 28063992
CVE: CVE-2018-3639
(cherry picked from commit 47c61b39) Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Conflicts:
arch/x86/include/asm/spec-ctrl.h
arch/x86/kernel/cpu/bugs.c
[
bugs.c: different file name
spec-ctrl.h: contextual changes. Diff couldn't be applied
]
Thomas Gleixner [Sat, 12 May 2018 18:10:00 +0000 (20:10 +0200)]
x86/bugs: Rework spec_ctrl base and mask logic
x86_spec_ctrL_mask is intended to mask out bits from a MSR_SPEC_CTRL value
which are not to be modified. However the implementation is not really used
and the bitmask was inverted to make a check easier, which was removed in
"x86/bugs: Remove x86_spec_ctrl_set()"
Aside of that it is missing the STIBP bit if it is supported by the
platform, so if the mask would be used in x86_virt_spec_ctrl() then it
would prevent a guest from setting STIBP.
Add the STIBP bit if supported and use the mask in x86_virt_spec_ctrl() to
sanitize the value which is supplied by the guest.
(cherry picked from commit be6fcb54) Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Conflicts:
arch/x86/kernel/cpu/bugs.c
[Konrad:
As we have the IBRS support and boy that makes it double hard.
The first part of this patch is to invert the mask, no biggie.
But the mask for the IBRS mode (that is - we want to set SPEC_CTRL
MSR to 1<<0 in kernel space, but in user-space we want it to be
1<<1) didn't set the SSBD bit as we should not set the SSBD
in kernel mode. But with the inversion that is OK.
Next part is the two values - x86_spec_ctrl_base and x86_spec_ctrl_priv.
The x86_spec_ctrl_base is what userspace is going to have (so
tack on SSBD), and x86_spec_ctrl_priv what runs in kernel (so
tack on IBRS, but _NOT_ SSBD).
That means the whole logic of filtering the supported SPEC_CTRL
value depending on what the host supports should be seeded
with x86_spec_ctrl_priv.
With all that the logic works - we end up ANDing our mask
and what we can support (and the initial boot-time value of the
MSR), and then ORing what the guest wants with our mask.
All the while supporting any other bits in the SPEC_CTRL that
may come in the future.
And this logic is fine on AMD too - where the SSBD bit does not
show up in the SPEC_CTRL mask
P.S.
To make it more fun the x86_spec_ctrl_priv |= IBRS is set in a
header (see set_ibrs_inuse).]
Thomas Gleixner [Sat, 12 May 2018 18:49:16 +0000 (20:49 +0200)]
x86/bugs: Expose x86_spec_ctrl_base directly
x86_spec_ctrl_base is the system wide default value for the SPEC_CTRL MSR.
x86_spec_ctrl_get_default() returns x86_spec_ctrl_base and was intended to
prevent modification to that variable. Though the variable is read only
after init and globaly visible already.
Remove the function and export the variable instead.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Orabug: 28063992
CVE: CVE-2018-3639
(cherry picked from commit fa8ac498) Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Conflicts:
arch/x86/include/asm/nospec-branch.h
arch/x86/include/asm/spec-ctrl.h
arch/x86/kernel/cpu/bugs.c
[Contextual changes: things weren't in the expected place]
Function bodies are very similar and are going to grow more almost
identical code. Add a bool arg to determine whether SPEC_CTRL is being set
for the guest or restored to the host.
No functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Orabug: 28063992
CVE: CVE-2018-3639
(cherry picked from commit cc69b349) Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Conflicts:
arch/x86/kernel/cpu/bugs.c
[Different filename bugs_64.c]
The upcoming support for the virtual SPEC_CTRL MSR on AMD needs to reuse
speculative_store_bypass_update() to avoid code duplication. Add an
argument for supplying a thread info (TIF) value and create a wrapper
speculative_store_bypass_update_current() which is used at the existing
call site.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Orabug: 28063992
CVE: CVE-2018-3639
(cherry picked from commit 0270be3e) Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Conflicts:
arch/x86/kernel/cpu/bugs.c
[Different filename (bugs_64.c)]
Tom Lendacky [Thu, 17 May 2018 15:09:18 +0000 (17:09 +0200)]
x86/speculation: Add virtualized speculative store bypass disable support
Some AMD processors only support a non-architectural means of enabling
speculative store bypass disable (SSBD). To allow a simplified view of
this to a guest, an architectural definition has been created through a new
CPUID bit, 0x80000008_EBX[25], and a new MSR, 0xc001011f. With this, a
hypervisor can virtualize the existence of this definition and provide an
architectural method for using SSBD to a guest.
Add the new CPUID feature, the new MSR and update the existing SSBD
support to use this MSR when present.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de>
Orabug: 28063992
CVE: CVE-2018-3639
(cherry picked from commit 11fb0683) Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Conflicts:
arch/x86/include/asm/cpufeatures.h
arch/x86/include/asm/msr-index.h
arch/x86/kernel/cpu/bugs.c
arch/x86/kernel/process.c
[
cpufeatures.h: different file name and different index
msr-index.h: different file location
bugs.c: different file name
process.c: different file structure
common.c: This is because we skipped the first two patches from the patch
series. We do no have enough feature bits to align all the actual feature in
our cpufeature structure. We created a synthetic feature and this is where we
detect and set it.
]
Thomas Gleixner [Wed, 9 May 2018 21:01:01 +0000 (23:01 +0200)]
x86/bugs, KVM: Extend speculation control for VIRT_SPEC_CTRL
AMD is proposing a VIRT_SPEC_CTRL MSR to handle the Speculative Store
Bypass Disable via MSR_AMD64_LS_CFG so that guests do not have to care
about the bit position of the SSBD bit and thus facilitate migration.
Also, the sibling coordination on Family 17H CPUs can only be done on
the host.
Extend x86_spec_ctrl_set_guest() and x86_spec_ctrl_restore_host() with an
extra argument for the VIRT_SPEC_CTRL MSR.
Hand in 0 from VMX and in SVM add a new virt_spec_ctrl member to the CPU
data structure which is going to be used in later patches for the actual
implementation.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Orabug: 28063992
CVE: CVE-2018-3639
(cherry picked from commit ccbcd267) Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Conflicts:
arch/x86/kernel/cpu/bugs.c
arch/x86/kvm/svm.c
arch/x86/kvm/vmx.c
[
We skipped cherry-picking two commits from upstream:
x86/cpufeatures: Disentangle SSBD enumeration ...
x86/cpufeatures: Disentangle MSR_SPEC_CTRL enumeration from IBRS ...
x86/speculation: Use synthetic bits for IBRS/IBPB/STIBP ...
Because we do not enough space in word 7 of synthetic bits for cpufeature. Also
we do not have the word 13 to move the bits around (like upstream did). We
cannot add word 13 because we will break kABI. So we do no have VIRT_SPEC_CTRL
cpufeature but we have VIRT_SSBD cpufeature which is a bit in virt_spec_ctrl
MSR.
]
Thomas Gleixner [Wed, 9 May 2018 19:53:09 +0000 (21:53 +0200)]
x86/speculation: Handle HT correctly on AMD
The AMD64_LS_CFG MSR is a per core MSR on Family 17H CPUs. That means when
hyperthreading is enabled the SSBD bit toggle needs to take both cores into
account. Otherwise the following situation can happen:
CPU0 CPU1
disable SSB
disable SSB
enable SSB <- Enables it for the Core, i.e. for CPU0 as well
So after the SSB enable on CPU1 the task on CPU0 runs with SSB enabled
again.
On Intel the SSBD control is per core as well, but the synchronization
logic is implemented behind the per thread SPEC_CTRL MSR. It works like
this:
i.e. if one of the threads enables a mitigation then this affects both and
the mitigation is only disabled in the core when both threads disabled it.
Add the necessary synchronization logic for AMD family 17H. Unfortunately
that requires a spinlock to serialize the access to the MSR, but the locks
are only shared between siblings.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Orabug: 28063992
CVE: CVE-2018-3639
(cherry picked from commit 1f50ddb4) Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Conflicts:
arch/x86/kernel/process.c
arch/x86/kernel/smpboot.c
[Contextual changes: in UEK4 files are pretty different and do not match the diff]
Thomas Gleixner [Thu, 10 May 2018 14:26:00 +0000 (16:26 +0200)]
x86/cpufeatures: Add FEATURE_ZEN
Add a ZEN feature bit so family-dependent static_cpu_has() optimizations
can be built for ZEN.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Orabug: 28063992
CVE: CVE-2018-3639
(cherry picked from commit d1035d97) Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Conflicts:
arch/x86/include/asm/cpufeatures.h
[Different filename and differnet bit for FEATURE_ZEN]
CPUID Fn8000_0007_EDX[CPB] is wrongly 0 on models up to B1. But they do
support CPB (AMD's Core Performance Boosting cpufreq CPU feature), so fix that.
(cherry picked from commit f7f3dc00) Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Annoyingly, modify_user_hw_breakpoint() unnecessarily complicates the
modification of a breakpoint - simplify it and remove the pointless
local variables.
Also update the stale Docbook while at it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
(cherry picked from commit f67b15037a7a50c57f72e69a6d59941ad90a0f0f) Signed-off-by: Brian Maly <brian.maly@oracle.com>
Thomas Gleixner [Fri, 11 May 2018 13:21:01 +0000 (15:21 +0200)]
KVM: SVM: Move spec control call after restore of GS
svm_vcpu_run() invokes x86_spec_ctrl_restore_host() after VMEXIT, but
before the host GS is restored. x86_spec_ctrl_restore_host() uses 'current'
to determine the host SSBD state of the thread. 'current' is GS based, but
host GS is not yet restored and the access causes a triple fault.
Fixes: 885f82bfbc6f x86/process: Allow runtime control of Speculative Store Bypass Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 15e6c22fd8e5a42c5ed6d487b7c9fe44c2517765) Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Brian Maly <brian.maly@oracle.com>
Conflicts:
arch/x86/kvm/svm.c
Konrad Rzeszutek Wilk [Fri, 11 May 2018 20:50:35 +0000 (16:50 -0400)]
x86/bugs: Fix the parameters alignment and missing void
Fixes: 7bb4d366c ("x86/bugs: Make cpu_show_common() static") Fixes: 24f7fc83b ("x86/bugs: Provide boot parameters for the spec_store_bypass_disable mitigation")
OraBug: 28041771
CVE: CVE-2018-3639
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
(cherry picked from commit ffed645e3be0e32f8e9ab068d257aee8d0fe8eec) Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Mihai Carabas <mihai.carabas@oracle.com>
Conflicts:
arch/x86/kernel/cpu/bugs.c
[It is called bugs_64 in UEK4]
Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
(cherry picked from commit 7bb4d366cba992904bffa4820d24e70a3de93e76) Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Mihai Carabas <mihai.carabas@oracle.com>
Conflicts:
arch/x86/kernel/cpu/bugs.c
[It is called bugs_64.c]
projects / users / jedix / linux-maple.git / log