Kent Overstreet [Fri, 14 Mar 2025 22:20:20 +0000 (18:20 -0400)]
bcachefs: fix build on 32 bit in get_random_u64_below()
bare 64 bit divides not allowed, whoops
arm-linux-gnueabi-ld: drivers/char/random.o: in function `__get_random_u64_below':
drivers/char/random.c:602:(.text+0xc70): undefined reference to `__aeabi_uldivmod'
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Linus Torvalds [Fri, 14 Mar 2025 22:14:32 +0000 (12:14 -1000)]
Merge tag 'bcachefs-2025-03-14' of git://evilpiepirate.org/bcachefs
Pull bcachefs hotfix from Kent Overstreet:
"This one is high priority: a user hit an assertion in the upgrade to
6.14, and we don't have a reproducer, so this changes the assertion to
an emergency read-only with more info so we can debug it"
* tag 'bcachefs-2025-03-14' of git://evilpiepirate.org/bcachefs:
bcachefs: Change btree wb assert to runtime error
Linus Torvalds [Fri, 14 Mar 2025 21:31:57 +0000 (11:31 -1000)]
Merge tag 'for-6.14/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fix from Mikulas Patocka:
- dm-flakey: fix memory corruption in optional corrupt_bio_byte feature
* tag 'for-6.14/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-flakey: Fix memory corruption in optional corrupt_bio_byte feature
Linus Torvalds [Fri, 14 Mar 2025 21:22:05 +0000 (11:22 -1000)]
Merge tag 'block-6.14-20250313' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Concurrent pci error and hotplug handling fix (Keith)
- Endpoint function fixes (Damien)
- Fix for a regression introduced in this cycle with error checking for
batched request completions (Shin'ichiro)
* tag 'block-6.14-20250313' of git://git.kernel.dk/linux:
block: change blk_mq_add_to_batch() third argument type to bool
nvme: move error logging from nvme_end_req() to __nvme_end_req()
nvmet: pci-epf: Do not add an IRQ vector if not needed
nvmet: pci-epf: Set NVMET_PCI_EPF_Q_LIVE when a queue is fully created
nvme-pci: fix stuck reset on concurrent DPC and HP
Linus Torvalds [Fri, 14 Mar 2025 20:57:28 +0000 (10:57 -1000)]
Merge tag 'platform-drivers-x86-v6.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and new HW support.
The diff is a bit larger than I'd prefer at this point due to
unwinding the amd/pmf driver's error handling properly instead of
calling a deinit function that was a can full of worms.
Summary:
- amd/pmf:
- Fix error handling in amd_pmf_init_smart_pc()
- Fix missing hidden options for Smart PC
- surface: aggregator_registry: Add Support for Surface Pro 11"
* tag 'platform-drivers-x86-v6.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
MAINTAINERS: Update Ike Panhc's email address
platform/x86/amd: pmf: Fix missing hidden options for Smart PC
platform/surface: aggregator_registry: Add Support for Surface Pro 11
platform/x86/amd/pmf: fix cleanup in amd_pmf_init_smart_pc()
Linus Torvalds [Fri, 14 Mar 2025 20:39:41 +0000 (10:39 -1000)]
Merge tag 'gpio-fixes-for-v6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"The first fix is a backport from my v6.15-rc1 queue that turned out to
be needed in v6.14 as well but as the former diverged from my fixes
branch I had to adjust the patch a bit.
The second one fixes a regression observed in user-space where closing
a file descriptor associated with a GPIO device results in a ~10ms
delay due to the atomic notifier calling rcu_synchronize() when
unregistering.
Summary:
- don't check the return value of gpio_chip::get_direction() when
registering a GPIO chip
- use raw notifier for line state events"
* tag 'gpio-fixes-for-v6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: cdev: use raw notifier for line state events
gpiolib: don't check the retval of get_direction() when registering a chip
Linus Torvalds [Fri, 14 Mar 2025 20:35:39 +0000 (10:35 -1000)]
Merge tag 'sound-6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of last-minute fixes.
Most of them are for ASoC, and the only one core fix is for reverting
the previous change, while the rest are all device-specific quirks and
fixes, which should be relatively safe to apply"
* tag 'sound-6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: cs42l43: convert to SYSTEM_SLEEP_PM_OPS
ALSA: hda/realtek: Add mute LED quirk for HP Pavilion x360 14-dy1xxx
ASoC: codecs: wm0010: Fix error handling path in wm0010_spi_probe()
ASoC: rt722-sdca: add missing readable registers
ASoC: amd: yc: Support mic on another Lenovo ThinkPad E16 Gen 2 model
ASoC: cs42l43: Fix maximum ADC Volume
ASoC: ops: Consistently treat platform_max as control value
ASoC: rt1320: set wake_capable = 0 explicitly
ASoC: cs42l43: Add jack delay debounce after suspend
ASoC: tegra: Fix ADX S24_LE audio format
ASoC: codecs: wsa884x: report temps to hwmon in millidegree of Celsius
ASoC: Intel: sof_sdw: Fix unlikely uninitialized variable use in create_sdw_dailinks()
Linus Torvalds [Fri, 14 Mar 2025 20:24:57 +0000 (10:24 -1000)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The main one is a horrible macro fix for our TLB flushing code which
resulted in over-invalidation on the MMU notifier path.
Summary:
- Fix population of the vmemmap for regions of memory that are
smaller than a section (128 MiB)
- Fix range-based TLB over-invalidation when invoked via a MMU
notifier"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
Fix mmu notifiers for range-based invalidates
arm64: mm: Populate vmemmap at the page level if not section aligned
Linus Torvalds [Fri, 14 Mar 2025 20:07:16 +0000 (10:07 -1000)]
Merge tag 'x86-urgent-2025-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix the bootup of SEV-SNP enabled guests under VMware hypervisors"
* tag 'x86-urgent-2025-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vmware: Parse MP tables for SEV-SNP enabled guests under VMware hypervisors
Linus Torvalds [Fri, 14 Mar 2025 19:56:46 +0000 (09:56 -1000)]
Merge tag 'sched-urgent-2025-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Fix a sleeping-while-atomic bug caused by a recent optimization
utilizing static keys that didn't consider that the
static_key_disable() call could be triggered in atomic context.
Revert the optimization"
* tag 'sched-urgent-2025-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/clock: Don't define sched_clock_irqtime as static key
Linus Torvalds [Fri, 14 Mar 2025 19:41:36 +0000 (09:41 -1000)]
Merge tag 'locking-urgent-2025-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc locking fixes from Ingo Molnar:
- Restrict the Rust runtime from unintended access to dynamically
allocated LockClassKeys
- KernelDoc annotation fix
- Fix a lock ordering bug in semaphore::up(), related to trying to
printk() and wake up the console within critical sections
* tag 'locking-urgent-2025-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/semaphore: Use wake_q to wake up processes outside lock critical section
locking/rtmutex: Use the 'struct' keyword in kernel-doc comment
rust: lockdep: Remove support for dynamically allocated LockClassKeys
Linus Torvalds [Fri, 14 Mar 2025 19:12:28 +0000 (09:12 -1000)]
Merge tag 'core-urgent-2025-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fix from Ingo Molnar:
"Fix a Sparse false positive warning triggered by no_free_ptr()"
* tag 'core-urgent-2025-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
<linux/cleanup.h>: Allow the passing of both iomem and non-iomem pointers to no_free_ptr()
Kent Overstreet [Fri, 14 Mar 2025 13:54:43 +0000 (09:54 -0400)]
bcachefs: Change btree wb assert to runtime error
We just had a report of the assert for "btree in write buffer for
non-write buffer btree" popping during the 6.14 upgrade.
- 150TB filesystem, after a reboot the upgrade was able to continue from
where it left off, so no major damage.
But with 6.14 about to come out we want to get this tracked down asap,
and need more data if other users hit this.
Convert the BUG_ON() to an emergency read-only, and print out btree, the
key itself, and stack trace from the original write buffer update (which
did not have this check before).
Reported-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Matthew Wilcox (Oracle) [Mon, 3 Mar 2025 18:02:32 +0000 (18:02 +0000)]
xfs: Use abs_diff instead of XFS_ABSDIFF
We have a central definition for this function since 2023, used by
a number of different parts of the kernel.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Carlos Maiolino <cem@kernel.org>
Linus Torvalds [Fri, 14 Mar 2025 08:45:25 +0000 (22:45 -1000)]
Merge tag 'drm-fixes-2025-03-14' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Regular weekly fixes pull, the usual leaders in amdgpu/xe, a couple of
i915, and some scattered misc fixes.
panic:
- two clippy fixes
dp_mst
- locking fix
atomic:
- fix redundant DPMS calls
i915:
- Do cdclk post plane programming later
- Bump MMAP_GTT_VERSION: missing indication of partial mmaps support
xe:
- Release guc ids before cancelling work
- Fix new warnings around userptr
- Temporaritly disable D3Cold on BMG
- Retry and wait longer for GuC PC to start
- Remove redundant check in xe_vm_create_ioctl
* tag 'drm-fixes-2025-03-14' of https://gitlab.freedesktop.org/drm/kernel: (23 commits)
drm/amdgpu: NULL-check BO's backing store when determining GFX12 PTE flags
drm/amd/amdkfd: Evict all queues even HWS remove queue failed
drm/i915: Increase I915_PARAM_MMAP_GTT_VERSION version to indicate support for partial mmaps
drm/dp_mst: Fix locking when skipping CSN before topology probing
drm/amdgpu/vce2: fix ip block reference
drm/amd/display: Fix slab-use-after-free on hdcp_work
drm/amd/display: Assign normalized_pix_clk when color depth = 14
drm/amd/display: Restore correct backlight brightness after a GPU reset
drm/amd/display: fix default brightness
drm/amd/display: Disable unneeded hpd interrupts during dm_init
drm/amd: Keep display off while going into S4
drm/amd/display: fix missing .is_two_pixels_per_container
drm/amdgpu/display: Allow DCC for video formats on GFX12
drm/xe: remove redundant check in xe_vm_create_ioctl()
drm/atomic: Filter out redundant DPMS calls
drm/xe/guc_pc: Retry and wait longer for GuC PC start
drm/xe/pm: Temporarily disable D3Cold on BMG
drm/i915/cdclk: Do cdclk post plane programming later
drm/xe/userptr: Fix an incorrect assert
drm/xe: Release guc ids before cancelling work
...
Dave Airlie [Fri, 14 Mar 2025 03:42:13 +0000 (13:42 +1000)]
Merge tag 'drm-xe-fixes-2025-03-13' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Release guc ids before cancelling work (Tejas)
- Fix new warnings around userptr (Thomas)
- Temporaritly disable D3Cold on BMG (Rodrigo)
- Retry and wait longer for GuC PC to start (Rodrigo)
- Remove redundant check in xe_vm_create_ioctl (Xin)
Linus Torvalds [Fri, 14 Mar 2025 01:34:26 +0000 (15:34 -1000)]
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A few clk driver fixes for Samsung and Qualcomm clk drivers:
- Suspend on Google GS101 crashes when trying to save some clk
registers that we shouldn't be saving so we don't do that anymore
- The PLL lock time was wrong on the Tesla FSD which could lead to
the PLL never locking
- Qualcomm's display clk controller on SM8750 was trying to change
the frequency of a parent clk for the DSI device when it should
have stopped and adjusted the divider. The failure is that the clk
frequency was half what was expected, leading to broken display"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: samsung: update PLL locktime for PLL142XX used on FSD platform
clk: samsung: gs101: fix synchronous external abort in samsung_clk_save()
clk: qcom: dispcc-sm8750: Drop incorrect CLK_SET_RATE_PARENT on byte intf parent
Linus Torvalds [Fri, 14 Mar 2025 01:10:59 +0000 (15:10 -1000)]
Merge tag 'bcachefs-2025-03-13' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Roxana caught an unitialized value that might explain some of the
rebalance weirdness we're still tracking down - cool.
Otherwise pretty minor"
* tag 'bcachefs-2025-03-13' of git://evilpiepirate.org/bcachefs:
bcachefs: bch2_get_random_u64_below()
bcachefs: target_congested -> get_random_u32_below()
bcachefs: fix tiny leak in bch2_dev_add()
bcachefs: Make sure trans is unlocked when submitting read IO
bcachefs: Initialize from_inode members for bch_io_opts
bcachefs: Fix b->written overflow
Dave Airlie [Fri, 14 Mar 2025 01:09:31 +0000 (11:09 +1000)]
Merge tag 'drm-misc-fixes-2025-03-13' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A null pointer check for gma500, two clippy fixes for panic, a fix for
an interaction between DPMS and atomic leading to dropped frames, and
a locking fix for dp_mst
Ajay Kaher [Thu, 13 Mar 2025 17:31:11 +0000 (17:31 +0000)]
x86/vmware: Parse MP tables for SEV-SNP enabled guests under VMware hypervisors
Under VMware hypervisors, SEV-SNP enabled VMs are fundamentally able to boot
without UEFI, but this regressed a year ago due to:
0f4a1e80989a ("x86/sev: Skip ROM range scans and validation for SEV-SNP guests")
In this case, mpparse_find_mptable() has to be called to parse MP
tables which contains the necessary boot information.
[ mingo: Updated the changelog. ]
Fixes: 0f4a1e80989a ("x86/sev: Skip ROM range scans and validation for SEV-SNP guests") Co-developed-by: Ye Li <ye.li@broadcom.com> Signed-off-by: Ye Li <ye.li@broadcom.com> Signed-off-by: Ajay Kaher <ajay.kaher@broadcom.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Ye Li <ye.li@broadcom.com> Reviewed-by: Kevin Loughlin <kevinloughlin@google.com> Acked-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20250313173111.10918-1-ajay.kaher@broadcom.com
Linus Torvalds [Thu, 13 Mar 2025 17:58:48 +0000 (07:58 -1000)]
Merge tag 'net-6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter, bluetooth and wireless.
No known regressions outstanding.
Current release - regressions:
- wifi: nl80211: fix assoc link handling
- eth: lan78xx: sanitize return values of register read/write
functions
Current release - new code bugs:
- ethtool: tsinfo: fix dump command
- bluetooth: btusb: configure altsetting for HCI_USER_CHANNEL
- eth: mlx5: DR, use the right action structs for STEv3
Previous releases - regressions:
- netfilter: nf_tables: make destruction work queue pernet
- gre: fix IPv6 link-local address generation.
- wifi: iwlwifi: fix TSO preparation
- bluetooth: revert "bluetooth: hci_core: fix sleeping function
called from invalid context"
- ovs: revert "openvswitch: switch to per-action label counting in
conntrack"
- eth:
- ice: fix switchdev slow-path in LAG
- bonding: fix incorrect MAC address setting to receive NS
messages
Previous releases - always broken:
- core: prevent TX of unreadable skbs
- sched: prevent creation of classes with TC_H_ROOT
- netfilter: nft_exthdr: fix offset with ipv4_find_option()
- wifi: cfg80211: cancel wiphy_work before freeing wiphy
- mctp: copy headers if cloned
- phy: nxp-c45-tja11xx: add errata for TJA112XA/B
- eth:
- bnxt: fix kernel panic in the bnxt_get_queue_stats{rx | tx}
- mlx5: bridge, fix the crash caused by LAG state check"
* tag 'net-6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
net: mana: cleanup mana struct after debugfs_remove()
net/mlx5e: Prevent bridge link show failure for non-eswitch-allowed devices
net/mlx5: Bridge, fix the crash caused by LAG state check
net/mlx5: Lag, Check shared fdb before creating MultiPort E-Switch
net/mlx5: Fix incorrect IRQ pool usage when releasing IRQs
net/mlx5: HWS, Rightsize bwc matcher priority
net/mlx5: DR, use the right action structs for STEv3
Revert "openvswitch: switch to per-action label counting in conntrack"
net: openvswitch: remove misbehaving actions length check
selftests: Add IPv6 link-local address generation tests for GRE devices.
gre: Fix IPv6 link-local address generation.
netfilter: nft_exthdr: fix offset with ipv4_find_option()
selftests/tc-testing: Add a test case for DRR class with TC_H_ROOT
net_sched: Prevent creation of classes with TC_H_ROOT
ipvs: prevent integer overflow in do_ip_vs_get_ctl()
selftests: netfilter: skip br_netfilter queue tests if kernel is tainted
netfilter: nf_conncount: Fully initialize struct nf_conncount_tuple in insert_tree()
wifi: mac80211: fix MPDU length parsing for EHT 5/6 GHz
qlcnic: fix memory leak issues in qlcnic_sriov_common.c
rtase: Fix improper release of ring list entries in rtase_sw_reset
...
Linus Torvalds [Thu, 13 Mar 2025 17:53:25 +0000 (07:53 -1000)]
Merge tag 'vfs-6.14-rc7.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Bring in an RCU pathwalk fix for afs. This is brought in as a merge
from the vfs-6.15.shared.afs branch that needs this commit and other
trees already depend on it.
- Fix vboxfs unterminated string handling.
* tag 'vfs-6.14-rc7.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
vboxsf: Add __nonstring annotations for unterminated strings
afs: Fix afs_atcell_get_link() to handle RCU pathwalk
Jens Axboe [Thu, 13 Mar 2025 15:41:57 +0000 (09:41 -0600)]
Merge tag 'nvme-6.14-2025-03-13' of git://git.infradead.org/nvme into block-6.14
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.14
- Concurrent pci error and hotplug handling fix (Keith)
- Endpoint function fixes (Damien)"
* tag 'nvme-6.14-2025-03-13' of git://git.infradead.org/nvme:
nvmet: pci-epf: Do not add an IRQ vector if not needed
nvmet: pci-epf: Set NVMET_PCI_EPF_Q_LIVE when a queue is fully created
nvme-pci: fix stuck reset on concurrent DPC and HP
Paolo Abeni [Thu, 13 Mar 2025 14:04:26 +0000 (15:04 +0100)]
Merge tag 'nf-25-03-13' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for net:
1) Missing initialization of cpu and jiffies32 fields in conncount,
from Kohei Enju.
2) Skip several tests in case kernel is tainted, otherwise tests bogusly
report failure too as they also check for tainted kernel,
from Florian Westphal.
3) Fix a hyphothetical integer overflow in do_ip_vs_get_ctl() leading
to bogus error logs, from Dan Carpenter.
4) Fix incorrect offset in ipv4 option match in nft_exthdr, from
Alexey Kashavkin.
netfilter pull request 25-03-13
* tag 'nf-25-03-13' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_exthdr: fix offset with ipv4_find_option()
ipvs: prevent integer overflow in do_ip_vs_get_ctl()
selftests: netfilter: skip br_netfilter queue tests if kernel is tainted
netfilter: nf_conncount: Fully initialize struct nf_conncount_tuple in insert_tree()
====================
Murad Masimov [Tue, 11 Mar 2025 14:22:06 +0000 (17:22 +0300)]
cifs: Fix integer overflow while processing closetimeo mount option
User-provided mount parameter closetimeo of type u32 is intended to have
an upper limit, but before it is validated, the value is converted from
seconds to jiffies which can lead to an integer overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 5efdd9122eff ("smb3: allow deferred close timeout to be configurable") Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru> Signed-off-by: Steve French <stfrench@microsoft.com>
Murad Masimov [Tue, 11 Mar 2025 14:22:05 +0000 (17:22 +0300)]
cifs: Fix integer overflow while processing actimeo mount option
User-provided mount parameter actimeo of type u32 is intended to have
an upper limit, but before it is validated, the value is converted from
seconds to jiffies which can lead to an integer overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 6d20e8406f09 ("cifs: add attribute cache timeout (actimeo) tunable") Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru> Signed-off-by: Steve French <stfrench@microsoft.com>
Murad Masimov [Tue, 11 Mar 2025 14:22:04 +0000 (17:22 +0300)]
cifs: Fix integer overflow while processing acdirmax mount option
User-provided mount parameter acdirmax of type u32 is intended to have
an upper limit, but before it is validated, the value is converted from
seconds to jiffies which can lead to an integer overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 4c9f948142a5 ("cifs: Add new mount parameter "acdirmax" to allow caching directory metadata") Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru> Signed-off-by: Steve French <stfrench@microsoft.com>
Murad Masimov [Tue, 11 Mar 2025 14:22:03 +0000 (17:22 +0300)]
cifs: Fix integer overflow while processing acregmax mount option
User-provided mount parameter acregmax of type u32 is intended to have
an upper limit, but before it is validated, the value is converted from
seconds to jiffies which can lead to an integer overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 5780464614f6 ("cifs: Add new parameter "acregmax" for distinct file and directory metadata timeout") Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru> Signed-off-by: Steve French <stfrench@microsoft.com>
Paulo Alcantara [Wed, 12 Mar 2025 13:51:31 +0000 (10:51 -0300)]
smb: client: fix regression with guest option
When mounting a CIFS share with 'guest' mount option, mount.cifs(8)
will set empty password= and password2= options. Currently we only
handle empty strings from user= and password= options, so the mount
will fail with
cifs: Bad value for 'password2'
Fix this by handling empty string from password2= option as well.
Link: https://bbs.archlinux.org/viewtopic.php?id=303927 Reported-by: Adam Williamson <awilliam@redhat.com> Closes: https://lore.kernel.org/r/83c00b5fea81c07f6897a5dd3ef50fd3b290f56c.camel@redhat.com Fixes: 35f834265e0d ("smb3: fix broken reconnect when password changing on the server by allowing password rotation") Cc: stable@vger.kernel.org Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Mario Limonciello [Thu, 6 Mar 2025 03:44:02 +0000 (21:44 -0600)]
platform/x86/amd: pmf: Fix missing hidden options for Smart PC
amd_pmf_get_slider_info() checks the current profile to report correct
value to the TA inputs. If hidden options are in use then the wrong
values will be reported to TA.
Add the two compat options PLATFORM_PROFILE_BALANCED_PERFORMANCE and
PLATFORM_PROFILE_QUIET for this use.
Reported-by: Yijun Shen <Yijun.Shen@dell.com> Fixes: 9a43102daf64d ("platform/x86/amd: pmf: Add balanced-performance to hidden choices") Fixes: 44e94fece5170 ("platform/x86/amd: pmf: Add 'quiet' to hidden choices") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20250306034402.50478-1-superm1@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Shradha Gupta [Tue, 11 Mar 2025 10:17:40 +0000 (03:17 -0700)]
net: mana: cleanup mana struct after debugfs_remove()
When on a MANA VM hibernation is triggered, as part of hibernate_snapshot(),
mana_gd_suspend() and mana_gd_resume() are called. If during this
mana_gd_resume(), a failure occurs with HWC creation, mana_port_debugfs
pointer does not get reinitialized and ends up pointing to older,
cleaned-up dentry.
Further in the hibernation path, as part of power_down(), mana_gd_shutdown()
is triggered. This call, unaware of the failures in resume, tries to cleanup
the already cleaned up mana_port_debugfs value and hits the following bug:
Carolina Jubran [Mon, 10 Mar 2025 22:01:44 +0000 (00:01 +0200)]
net/mlx5e: Prevent bridge link show failure for non-eswitch-allowed devices
mlx5_eswitch_get_vepa returns -EPERM if the device lacks
eswitch_manager capability, blocking mlx5e_bridge_getlink from
retrieving VEPA mode. Since mlx5e_bridge_getlink implements
ndo_bridge_getlink, returning -EPERM causes bridge link show to fail
instead of skipping devices without this capability.
To avoid this, return -EOPNOTSUPP from mlx5e_bridge_getlink when
mlx5_eswitch_get_vepa fails, ensuring the command continues processing
other devices while ignoring those without the necessary capability.
Fixes: 4b89251de024 ("net/mlx5: Support ndo bridge_setlink and getlink") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/1741644104-97767-7-git-send-email-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jianbo Liu [Mon, 10 Mar 2025 22:01:43 +0000 (00:01 +0200)]
net/mlx5: Bridge, fix the crash caused by LAG state check
When removing LAG device from bridge, NETDEV_CHANGEUPPER event is
triggered. Driver finds the lower devices (PFs) to flush all the
offloaded entries. And mlx5_lag_is_shared_fdb is checked, it returns
false if one of PF is unloaded. In such case,
mlx5_esw_bridge_lag_rep_get() and its caller return NULL, instead of
the alive PF, and the flush is skipped.
Besides, the bridge fdb entry's lastuse is updated in mlx5 bridge
event handler. But this SWITCHDEV_FDB_ADD_TO_BRIDGE event can be
ignored in this case because the upper interface for bond is deleted,
and the entry will never be aged because lastuse is never updated.
To make things worse, as the entry is alive, mlx5 bridge workqueue
keeps sending that event, which is then handled by kernel bridge
notifier. It causes the following crash when accessing the passed bond
netdev which is already destroyed.
To fix this issue, remove such checks. LAG state is already checked in
commit 15f8f168952f ("net/mlx5: Bridge, verify LAG state when adding
bond to bridge"), driver still need to skip offload if LAG becomes
invalid state after initialization.
Shay Drory [Mon, 10 Mar 2025 22:01:41 +0000 (00:01 +0200)]
net/mlx5: Fix incorrect IRQ pool usage when releasing IRQs
mlx5_irq_pool_get() is a getter for completion IRQ pool only.
However, after the cited commit, mlx5_irq_pool_get() is called during
ctrl IRQ release flow to retrieve the pool, resulting in the use of an
incorrect IRQ pool.
Hence, use the newly introduced mlx5_irq_get_pool() getter to retrieve
the correct IRQ pool based on the IRQ itself. While at it, rename
mlx5_irq_pool_get() to mlx5_irq_table_get_comp_irq_pool() which
accurately reflects its purpose and improves code readability.
Vlad Dogaru [Mon, 10 Mar 2025 22:01:40 +0000 (00:01 +0200)]
net/mlx5: HWS, Rightsize bwc matcher priority
The bwc layer was clamping the matcher priority from 32 bits to 16 bits.
This didn't show up until a matcher was resized, since the initial
native matcher was created using the correct 32 bit value.
The fix also reorders fields to avoid some padding.
Fixes: 2111bb970c78 ("net/mlx5: HWS, added backward-compatible API handling") Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com> Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1741644104-97767-3-git-send-email-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Yevgeny Kliteynik [Mon, 10 Mar 2025 22:01:39 +0000 (00:01 +0200)]
net/mlx5: DR, use the right action structs for STEv3
Some actions in ConnectX-8 (STEv3) have different structure,
and they are handled separately in ste_ctx_v3.
This separate handling was missing two actions: INSERT_HDR
and REMOVE_HDR, which broke SWS for Linux Bridge.
This patch resolves the issue by introducing dedicated
callbacks for the insert and remove header functions,
with version-specific implementations for each STE variant.
Fixes: 4d617b57574f ("net/mlx5: DR, add support for ConnectX-8 steering") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Itamar Gozlan <igozlan@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1741644104-97767-2-git-send-email-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Xin Long [Sat, 8 Mar 2025 18:05:43 +0000 (13:05 -0500)]
Revert "openvswitch: switch to per-action label counting in conntrack"
Currently, ovs_ct_set_labels() is only called for confirmed conntrack
entries (ct) within ovs_ct_commit(). However, if the conntrack entry
does not have the labels_ext extension, attempting to allocate it in
ovs_ct_get_conn_labels() for a confirmed entry triggers a warning in
nf_ct_ext_add():
WARN_ON(nf_ct_is_confirmed(ct));
This happens when the conntrack entry is created externally before OVS
increments net->ct.labels_used. The issue has become more likely since
commit fcb1aa5163b1 ("openvswitch: switch to per-action label counting
in conntrack"), which changed to use per-action label counting and
increment net->ct.labels_used when a flow with ct action is added.
Since there’s no straightforward way to fully resolve this issue at the
moment, this reverts the commit to avoid breaking existing use cases.
The actions length check is unreliable and produces different results
depending on the initial length of the provided netlink attribute and
the composition of the actual actions inside of it. For example, a
user can add 4088 empty clone() actions without triggering -EMSGSIZE,
on attempt to add 4089 such actions the operation will fail with the
-EMSGSIZE verdict. However, if another 16 KB of other actions will
be *appended* to the previous 4089 clone() actions, the check passes
and the flow is successfully installed into the openvswitch datapath.
The reason for a such a weird behavior is the way memory is allocated.
When ovs_flow_cmd_new() is invoked, it calls ovs_nla_copy_actions(),
that in turn calls nla_alloc_flow_actions() with either the actual
length of the user-provided actions or the MAX_ACTIONS_BUFSIZE. The
function adds the size of the sw_flow_actions structure and then the
actually allocated memory is rounded up to the closest power of two.
So, if the user-provided actions are larger than MAX_ACTIONS_BUFSIZE,
then MAX_ACTIONS_BUFSIZE + sizeof(*sfa) rounded up is 32K + 24 -> 64K.
Later, while copying individual actions, we look at ksize(), which is
64K, so this way the MAX_ACTIONS_BUFSIZE check is not actually
triggered and the user can easily allocate almost 64 KB of actions.
However, when the initial size is less than MAX_ACTIONS_BUFSIZE, but
the actions contain ones that require size increase while copying
(such as clone() or sample()), then the limit check will be performed
during the reserve_sfa_size() and the user will not be allowed to
create actions that yield more than 32 KB internally.
This is one part of the problem. The other part is that it's not
actually possible for the userspace application to know beforehand
if the particular set of actions will be rejected or not.
Certain actions require more space in the internal representation,
e.g. an empty clone() takes 4 bytes in the action list passed in by
the user, but it takes 12 bytes in the internal representation due
to an extra nested attribute, and some actions require less space in
the internal representations, e.g. set(tunnel(..)) normally takes
64+ bytes in the action list provided by the user, but only needs to
store a single pointer in the internal implementation, since all the
data is stored in the tunnel_info structure instead.
And the action size limit is applied to the internal representation,
not to the action list passed by the user. So, it's not possible for
the userpsace application to predict if the certain combination of
actions will be rejected or not, because it is not possible for it to
calculate how much space these actions will take in the internal
representation without knowing kernel internals.
All that is causing random failures in ovs-vswitchd in userspace and
inability to handle certain traffic patterns as a result. For example,
it is reported that adding a bit more than a 1100 VMs in an OpenStack
setup breaks the network due to OVS not being able to handle ARP
traffic anymore in some cases (it tries to install a proper datapath
flow, but the kernel rejects it with -EMSGSIZE, even though the action
list isn't actually that large.)
Kernel behavior must be consistent and predictable in order for the
userspace application to use it in a reasonable way. ovs-vswitchd has
a mechanism to re-direct parts of the traffic and partially handle it
in userspace if the required action list is oversized, but that doesn't
work properly if we can't actually tell if the action list is oversized
or not.
Solution for this is to check the size of the user-provided actions
instead of the internal representation. This commit just removes the
check from the internal part because there is already an implicit size
check imposed by the netlink protocol. The attribute can't be larger
than 64 KB. Realistically, we could reduce the limit to 32 KB, but
we'll be risking to break some existing setups that rely on the fact
that it's possible to create nearly 64 KB action lists today.
Vast majority of flows in real setups are below 100-ish bytes. So
removal of the limit will not change real memory consumption on the
system. The absolutely worst case scenario is if someone adds a flow
with 64 KB of empty clone() actions. That will yield a 192 KB in the
internal representation consuming 256 KB block of memory. However,
that list of actions is not meaningful and also a no-op. Real world
very large action lists (that can occur for a rare cases of BUM
traffic handling) are unlikely to contain a large number of clones and
will likely have a lot of tunnel attributes making the internal
representation comparable in size to the original action list.
So, it should be fine to just remove the limit.
Commit in the 'Fixes' tag is the first one that introduced the
difference between internal representation and the user-provided action
lists, but there were many more afterwards that lead to the situation
we have today.
====================
gre: Fix regressions in IPv6 link-local address generation.
IPv6 link-local address generation has some special cases for GRE
devices. This has led to several regressions in the past, and some of
them are still not fixed. This series fixes the remaining problems,
like the ipv6.conf.<dev>.addr_gen_mode sysctl being ignored and the
router discovery process not being started (see details in patch 1).
To avoid any further regressions, patch 2 adds selftests covering
IPv4 and IPv6 gre/gretap devices with all combinations of currently
supported addr_gen_mode values.
====================
Guillaume Nault [Fri, 7 Mar 2025 19:28:58 +0000 (20:28 +0100)]
selftests: Add IPv6 link-local address generation tests for GRE devices.
GRE devices have their special code for IPv6 link-local address
generation that has been the source of several regressions in the past.
Add selftest to check that all gre, ip6gre, gretap and ip6gretap get an
IPv6 link-link local address in accordance with the
net.ipv6.conf.<dev>.addr_gen_mode sysctl.
Guillaume Nault [Fri, 7 Mar 2025 19:28:53 +0000 (20:28 +0100)]
gre: Fix IPv6 link-local address generation.
Use addrconf_addr_gen() to generate IPv6 link-local addresses on GRE
devices in most cases and fall back to using add_v4_addrs() only in
case the GRE configuration is incompatible with addrconf_addr_gen().
GRE used to use addrconf_addr_gen() until commit e5dd729460ca
("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL
address") restricted this use to gretap and ip6gretap devices, and
created add_v4_addrs() (borrowed from SIT) for non-Ethernet GRE ones.
The original problem came when commit 9af28511be10 ("addrconf: refuse
isatap eui64 for INADDR_ANY") made __ipv6_isatap_ifid() fail when its
addr parameter was 0. The commit says that this would create an invalid
address, however, I couldn't find any RFC saying that the generated
interface identifier would be wrong. Anyway, since gre over IPv4
devices pass their local tunnel address to __ipv6_isatap_ifid(), that
commit broke their IPv6 link-local address generation when the local
address was unspecified.
Then commit e5dd729460ca ("ip/ip6_gre: use the same logic as SIT
interfaces when computing v6LL address") tried to fix that case by
defining add_v4_addrs() and calling it to generate the IPv6 link-local
address instead of using addrconf_addr_gen() (apart for gretap and
ip6gretap devices, which would still use the regular
addrconf_addr_gen(), since they have a MAC address).
That broke several use cases because add_v4_addrs() isn't properly
integrated into the rest of IPv6 Neighbor Discovery code. Several of
these shortcomings have been fixed over time, but add_v4_addrs()
remains broken on several aspects. In particular, it doesn't send any
Router Sollicitations, so the SLAAC process doesn't start until the
interface receives a Router Advertisement. Also, add_v4_addrs() mostly
ignores the address generation mode of the interface
(/proc/sys/net/ipv6/conf/*/addr_gen_mode), thus breaking the
IN6_ADDR_GEN_MODE_RANDOM and IN6_ADDR_GEN_MODE_STABLE_PRIVACY cases.
Fix the situation by using add_v4_addrs() only in the specific scenario
where the normal method would fail. That is, for interfaces that have
all of the following characteristics:
* run over IPv4,
* transport IP packets directly, not Ethernet (that is, not gretap
interfaces),
* tunnel endpoint is INADDR_ANY (that is, 0),
* device address generation mode is EUI64.
In all other cases, revert back to the regular addrconf_addr_gen().
Also, remove the special case for ip6gre interfaces in add_v4_addrs(),
since ip6gre devices now always use addrconf_addr_gen() instead.
Alexey Kashavkin [Sat, 1 Mar 2025 21:14:36 +0000 (00:14 +0300)]
netfilter: nft_exthdr: fix offset with ipv4_find_option()
There is an incorrect calculation in the offset variable which causes
the nft_skb_copy_to_reg() function to always return -EFAULT. Adding the
start variable is redundant. In the __ip_options_compile() function the
correct offset is specified when finding the function. There is no need
to add the size of the iphdr structure to the offset.
Fixes: dbb5281a1f84 ("netfilter: nf_tables: add support for matching IPv4 options") Signed-off-by: Alexey Kashavkin <akashavkin@gmail.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Bartosz Golaszewski [Tue, 11 Mar 2025 14:31:43 +0000 (15:31 +0100)]
gpio: cdev: use raw notifier for line state events
We use a notifier to implement the mechanism of informing the user-space
about changes in GPIO line status. We register with the notifier when
the GPIO character device file is opened and unregister when the last
reference to the associated file descriptor is dropped.
Since commit fcc8b637c542 ("gpiolib: switch the line state notifier to
atomic") we use the atomic notifier variant. Atomic notifiers call
rcu_synchronize in atomic_notifier_chain_unregister() which caused a
significant performance regression in some circumstances, observed by
user-space when calling close() on the GPIO device file descriptor.
Replace the atomic notifier with the raw variant and provide
synchronization with a read-write spinlock.
Fixes: fcc8b637c542 ("gpiolib: switch the line state notifier to atomic") Reported-by: David Jander <david@protonic.nl> Closes: https://lore.kernel.org/all/20250311110034.53959031@erd003.prtnl/ Tested-by: David Jander <david@protonic.nl> Tested-by: Kent Gibson <warthog618@gmail.com> Link: https://lore.kernel.org/r/20250311-gpiolib-line-state-raw-notifier-v2-1-138374581e1e@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Bartosz Golaszewski [Tue, 11 Mar 2025 17:56:31 +0000 (18:56 +0100)]
gpiolib: don't check the retval of get_direction() when registering a chip
During chip registration we should neither check the return value of
gc->get_direction() nor hold the SRCU lock when calling it. The former
is because pin controllers may have pins set to alternate functions and
return errors from their get_direction() callbacks. That's alright - we
should default to the safe INPUT state and not bail-out. The latter is
not needed because we haven't registered the chip yet so there's nothing
to protect against dynamic removal. In fact: we currently hit a lockdep
splat. Revert to calling the gc->get_direction() callback directly and
*not* checking its value.
Fixes: 9d846b1aebbe ("gpiolib: check the return value of gpio_chip::get_direction()") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Closes: https://lore.kernel.org/all/81f890fc-6688-42f0-9756-567efc8bb97a@samsung.com/ Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20250226-retval-fixes-v2-1-c8dc57182441@linaro.org Tested-by: Gene C <arch@sapience.com> Link: https://lore.kernel.org/r/20250311175631.83779-1-brgl@bgdev.pl Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Takashi Iwai [Thu, 13 Mar 2025 06:33:48 +0000 (07:33 +0100)]
Merge tag 'asoc-fix-v6.14-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.14
The bulk of this is driver specific fixes, mostly unremarkable. There's
also one core fix from Charles, fixing up confusion around the limiting
of maximum control values.
Linus Torvalds [Wed, 12 Mar 2025 21:52:04 +0000 (11:52 -1000)]
Merge tag 'sched_ext-for-6.14-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fix from Tejun Heo:
"BPF schedulers could trigger a crash by passing in an invalid CPU to
the scx_bpf_select_cpu_dfl() helper.
Fix it by verifying input validity"
* tag 'sched_ext-for-6.14-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Validate prev_cpu in scx_bpf_select_cpu_dfl()
Linus Torvalds [Wed, 12 Mar 2025 21:47:24 +0000 (11:47 -1000)]
Merge tag 'spi-fix-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of driver specific fixes, an error handling fix for the Atmel
QuadSPI driver and a fix for a nasty synchronisation issue in the data
path for the Microchip driver which affects larger transfers.
There's also a MAINTAINERS update for the Samsung driver"
* tag 'spi-fix-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: microchip-core: prevent RX overflows when transmit size > FIFO size
MAINTAINERS: add tambarus as R for Samsung SPI
spi: atmel-quadspi: remove references to runtime PM on error path
Cong Wang [Thu, 6 Mar 2025 23:23:55 +0000 (15:23 -0800)]
selftests/tc-testing: Add a test case for DRR class with TC_H_ROOT
Integrate the reproduer from Mingi to TDC.
All test results:
1..4
ok 1 0385 - Create DRR with default setting
ok 2 2375 - Delete DRR with handle
ok 3 3092 - Show DRR class
ok 4 4009 - Reject creation of DRR class with classid TC_H_ROOT
Cong Wang [Thu, 6 Mar 2025 23:23:54 +0000 (15:23 -0800)]
net_sched: Prevent creation of classes with TC_H_ROOT
The function qdisc_tree_reduce_backlog() uses TC_H_ROOT as a termination
condition when traversing up the qdisc tree to update parent backlog
counters. However, if a class is created with classid TC_H_ROOT, the
traversal terminates prematurely at this class instead of reaching the
actual root qdisc, causing parent statistics to be incorrectly maintained.
In case of DRR, this could lead to a crash as reported by Mingi Cho.
Prevent the creation of any Qdisc class with classid TC_H_ROOT
(0xFFFFFFFF) across all qdisc types, as suggested by Jamal.
Reported-by: Mingi Cho <mincho@theori.io> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Fixes: 066a3b5b2346 ("[NET_SCHED] sch_api: fix qdisc_tree_decrease_qlen() loop") Link: https://patch.msgid.link/20250306232355.93864-2-xiyou.wangcong@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yifan Zha [Wed, 5 Mar 2025 05:14:55 +0000 (13:14 +0800)]
drm/amd/amdkfd: Evict all queues even HWS remove queue failed
[Why]
If reset is detected and kfd need to evict working queues, HWS moving queue will be failed.
Then remaining queues are not evicted and in active state.
After reset done, kfd uses HWS to termination remaining activated queues but HWS is resetted.
So remove queue will be failed again.
[How]
Keep removing all queues even if HWS returns failed.
It will not affect cpsch as it checks reset_domain->sem.
v2: If any queue failed, evict queue returns error.
v3: Declare err inside the if-block.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 42c854b8fb0cce512534aa2b7141948e80c6ebb0) Cc: stable@vger.kernel.org
Arnd Bergmann [Wed, 5 Mar 2025 17:27:32 +0000 (18:27 +0100)]
ASoC: cs42l43: convert to SYSTEM_SLEEP_PM_OPS
The custom suspend function causes a build warning when CONFIG_PM_SLEEP
is disabled:
sound/soc/codecs/cs42l43.c:2405:12: error: unused function 'cs42l43_codec_runtime_force_suspend' [-Werror,-Wunused-function]
Change SET_SYSTEM_SLEEP_PM_OPS() to the newer SYSTEM_SLEEP_PM_OPS(),
to avoid this.
Fixes: 164b7dd4546b ("ASoC: cs42l43: Add jack delay debounce after suspend") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250305172738.3437513-1-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
Navon John Lukose [Fri, 7 Mar 2025 21:33:19 +0000 (03:03 +0530)]
ALSA: hda/realtek: Add mute LED quirk for HP Pavilion x360 14-dy1xxx
Add a fixup to enable the mute LED on HP Pavilion x360 Convertible
14-dy1xxx with ALC295 codec. The appropriate coefficient index and bits
were identified through a brute-force method, as detailed in
https://bbs.archlinux.org/viewtopic.php?pid=2079504#p2079504.
Dan Carpenter [Mon, 10 Mar 2025 07:45:53 +0000 (10:45 +0300)]
ipvs: prevent integer overflow in do_ip_vs_get_ctl()
The get->num_services variable is an unsigned int which is controlled by
the user. The struct_size() function ensures that the size calculation
does not overflow an unsigned long, however, we are saving the result to
an int so the calculation can overflow.
Both "len" and "get->num_services" come from the user. This check is
just a sanity check to help the user and ensure they are using the API
correctly. An integer overflow here is not a big deal. This has no
security impact.
Save the result from struct_size() type size_t to fix this integer
overflow bug.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Kohei Enju [Sun, 9 Mar 2025 08:07:38 +0000 (17:07 +0900)]
netfilter: nf_conncount: Fully initialize struct nf_conncount_tuple in insert_tree()
Since commit b36e4523d4d5 ("netfilter: nf_conncount: fix garbage
collection confirm race"), `cpu` and `jiffies32` were introduced to
the struct nf_conncount_tuple.
The commit made nf_conncount_add() initialize `conn->cpu` and
`conn->jiffies32` when allocating the struct.
In contrast, count_tree() was not changed to initialize them.
By commit 34848d5c896e ("netfilter: nf_conncount: Split insert and
traversal"), count_tree() was split and the relevant allocation
code now resides in insert_tree().
Initialize `conn->cpu` and `conn->jiffies32` in insert_tree().
Shin'ichiro Kawasaki [Tue, 11 Mar 2025 10:43:59 +0000 (19:43 +0900)]
block: change blk_mq_add_to_batch() third argument type to bool
Commit 1f47ed294a2b ("block: cleanup and fix batch completion adding
conditions") modified the evaluation criteria for the third argument,
'ioerror', in the blk_mq_add_to_batch() function. Initially, the
function had checked if 'ioerror' equals zero. Following the commit, it
started checking for negative error values, with the presumption that
such values, for instance -EIO, would be passed in.
However, blk_mq_add_to_batch() callers do not pass negative error
values. Instead, they pass status codes defined in various ways:
- NVMe PCI and Apple drivers pass NVMe status code
- virtio_blk driver passes the virtblk request header status byte
- null_blk driver passes blk_status_t
These codes are either zero or positive, therefore the revised check
fails to function as intended. Specifically, with the NVMe PCI driver,
this modification led to the failure of the blktests test case nvme/039.
In this test scenario, errors are artificially injected to the NVMe
driver, resulting in positive NVMe status codes passed to
blk_mq_add_to_batch(), which unexpectedly processes the failed I/O in a
batch. Hence the failure.
To correct the ioerror check within blk_mq_add_to_batch(), make all
callers to uniformly pass the argument as boolean. Modify the callers to
check their specific status codes and pass the boolean value 'is_error'.
Also describe the arguments of blK_mq_add_to_batch as kerneldoc.
David S. Miller [Wed, 12 Mar 2025 13:56:58 +0000 (13:56 +0000)]
Merge tag 'wireless-2025-03-12' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes berg says:
====================
Few more fixes:
- cfg80211/mac80211
- stop possible runaway wiphy worker
- EHT should not use reserved MPDU size bits
- don't run worker for stopped interfaces
- fix SA Query processing with MLO
- fix lookup of assoc link BSS entries
- correct station flush on unauthorize
- iwlwifi:
- TSO fixes
- fix non-MSI-X platforms
- stop possible runaway restart worker
- rejigger maintainers so I'm not CC'ed on
everything
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Berg [Tue, 11 Mar 2025 11:17:04 +0000 (12:17 +0100)]
wifi: mac80211: fix MPDU length parsing for EHT 5/6 GHz
The MPDU length is only configured using the EHT capabilities element on
2.4 GHz. On 5/6 GHz it is configured using the VHT or HE capabilities
respectively.
Linus Torvalds [Tue, 11 Mar 2025 22:49:51 +0000 (12:49 -1000)]
Merge tag 'hyperv-fixes-signed-20250311' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Patches to fix Hyper-v framebuffer code (Michael Kelley and Saurabh
Sengar)
- Fix for Hyper-V output argument to hypercall that changes page
visibility (Michael Kelley)
- Fix for Hyper-V VTL mode (Naman Jain)
* tag 'hyperv-fixes-signed-20250311' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: Don't release fb_mmio resource in vmbus_free_mmio()
x86/hyperv: Fix output argument to hypercall that changes page visibility
fbdev: hyperv_fb: Allow graceful removal of framebuffer
fbdev: hyperv_fb: Simplify hvfb_putmem
fbdev: hyperv_fb: Fix hang in kdump kernel when on Hyper-V Gen 2 VMs
drm/hyperv: Fix address space leak when Hyper-V DRM device is removed
fbdev: hyperv_fb: iounmap() the correct memory when removing a device
x86/hyperv/vtl: Stop kernel from probing VTL0 low memory
José Roberto de Souza [Thu, 6 Mar 2025 21:08:27 +0000 (13:08 -0800)]
drm/i915: Increase I915_PARAM_MMAP_GTT_VERSION version to indicate support for partial mmaps
Commit 255fc1703e42 ("drm/i915/gem: Calculate object page offset for partial memory mapping")
was the last patch of several patches fixing multiple partial mmaps.
But without a bump in I915_PARAM_MMAP_GTT_VERSION there is no clean
way for UMD to know if it can do multiple partial mmaps.
Fixes: 255fc1703e42 ("drm/i915/gem: Calculate object page offset for partial memory mapping") Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250306210827.171147-1-jose.souza@intel.com
(cherry picked from commit bfef148f3680e6b9d28e7fca46d9520f80c5e50e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Stephen Boyd [Tue, 11 Mar 2025 17:51:13 +0000 (10:51 -0700)]
Merge tag 'samsung-clk-fixes-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into clk-fixes
Pull Samsung clk driver fixes from Krzysztof Kozlowski:
- Google GS101: Fix synchronous external abort during system suspend.
The driver access registers not available for OS, although issue
would not be visible in earlier kernels due to missing suspend
support.
- Tesla FSD: Correct PLL142XX lock time
* tag 'samsung-clk-fixes-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
clk: samsung: update PLL locktime for PLL142XX used on FSD platform
clk: samsung: gs101: fix synchronous external abort in samsung_clk_save()
Dan Carpenter [Mon, 10 Mar 2025 19:48:29 +0000 (22:48 +0300)]
platform/x86/amd/pmf: fix cleanup in amd_pmf_init_smart_pc()
There are a few problems in this code:
First, if amd_pmf_tee_init() fails then the function returns directly
instead of cleaning up. We cannot simply do a "goto error;" because
the amd_pmf_tee_init() cleanup calls tee_shm_free(dev->fw_shm_pool);
and amd_pmf_tee_deinit() calls it as well leading to a double free.
I have re-written this code to use an unwind ladder to free the
allocations.
Second, if amd_pmf_start_policy_engine() fails on every iteration though
the loop then the code calls amd_pmf_tee_deinit() twice which is also a
double free. Call amd_pmf_tee_deinit() inside the loop for each failed
iteration. Also on that path the error codes are not necessarily
negative kernel error codes. Set the error code to -EINVAL.
There is a very subtle third bug which is that if the call to
input_register_device() in amd_pmf_register_input_device() fails then
we call input_unregister_device() on an input device that wasn't
registered. This will lead to a reference counting underflow
because of the device_del(&dev->dev) in __input_unregister_device().
It's unlikely that anyone would ever hit this bug in real life.
Fixes: 376a8c2a1443 ("platform/x86/amd/pmf: Update PMF Driver for Compatibility with new PMF-TA") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/232231fc-6a71-495e-971b-be2a76f6db4c@stanley.mountain Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Roxana Nicolescu [Tue, 11 Mar 2025 15:06:10 +0000 (15:06 +0000)]
bcachefs: Initialize from_inode members for bch_io_opts
When there is no inode source, all "from_inode" members in the structure
bhc_io_opts should be set false.
Fixes: 7a7c43a0c1ecf ("bcachefs: Add bch_io_opts fields for indicating whether the opts came from the inode") Reported-by: syzbot+c17ad4b4367b72a853cb@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c17ad4b4367b72a853cb Signed-off-by: Roxana Nicolescu <nicolescu.roxana@protonmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Haoxiang Li [Fri, 7 Mar 2025 09:49:52 +0000 (17:49 +0800)]
qlcnic: fix memory leak issues in qlcnic_sriov_common.c
Add qlcnic_sriov_free_vlans() in qlcnic_sriov_alloc_vlans() if
any sriov_vlans fails to be allocated.
Add qlcnic_sriov_free_vlans() to free the memory allocated by
qlcnic_sriov_alloc_vlans() if "sriov->allowed_vlans" fails to
be allocated.
Shin'ichiro Kawasaki [Tue, 11 Mar 2025 10:43:58 +0000 (19:43 +0900)]
nvme: move error logging from nvme_end_req() to __nvme_end_req()
Before the Commit 1f47ed294a2b ("block: cleanup and fix batch completion
adding conditions"), blk_mq_add_to_batch() did not add failed
passthrough requests to batch, and returned false. After the commit,
blk_mq_add_to_batch() always adds passthrough requests to batch
regardless of whether the request failed or not, and returns true. This
affected error logging feature in the NVME driver.
Before the commit, the call chain of failed passthrough request was as
follows:
nvme_handle_cqe()
blk_mq_add_to_batch() .. false is returned, then call nvme_pci_complete_rq()
nvme_pci_complete_rq()
nvme_complete_rq()
nvme_end_req()
nvme_log_err_passthru() .. error logging
__nvme_end_req() .. end of the rqeuest
After the commit, the call chain is as follows:
nvme_handle_cqe()
blk_mq_add_to_batch() .. true is returned, then set nvme_pci_complete_batch()
..
nvme_pci_complete_batch()
nvme_complete_batch()
nvme_complete_batch_req()
__nvme_end_req() .. end of the request, without error logging
To make the error logging feature work again for passthrough requests, move the
nvme_log_err_passthru() call from nvme_end_req() to __nvme_end_req().
While at it, move nvme_log_error() call for non-passthrough requests together
with nvme_log_err_passthru(). Even though the trigger commit does not affect
non-passthrough requests, move it together for code simplicity.
Fixes: 1f47ed294a2b ("block: cleanup and fix batch completion adding conditions") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250311104359.1767728-2-shinichiro.kawasaki@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Justin Lai [Thu, 6 Mar 2025 07:05:10 +0000 (15:05 +0800)]
rtase: Fix improper release of ring list entries in rtase_sw_reset
Since rtase_init_ring, which is called within rtase_sw_reset, adds ring
entries already present in the ring list back into the list, it causes
the ring list to form a cycle. This results in list_for_each_entry_safe
failing to find an endpoint during traversal, leading to an error.
Therefore, it is necessary to remove the previously added ring_list nodes
before calling rtase_init_ring.
Hangbin Liu [Thu, 6 Mar 2025 02:39:22 +0000 (02:39 +0000)]
bonding: fix incorrect MAC address setting to receive NS messages
When validation on the backup slave is enabled, we need to validate the
Neighbor Solicitation (NS) messages received on the backup slave. To
receive these messages, the correct destination MAC address must be added
to the slave. However, the target in bonding is a unicast address, which
we cannot use directly. Instead, we should first convert it to a
Solicited-Node Multicast Address and then derive the corresponding MAC
address.
Fix the incorrect MAC address setting on both slave_set_ns_maddr() and
slave_set_ns_maddrs(). Since the two function names are similar. Add
some description for the functions. Also only use one mac_addr variable
in slave_set_ns_maddr() to save some code and logic.
Fixes: 8eb36164d1a6 ("bonding: add ns target multicast address to slave device") Acked-by: Jay Vosburgh <jv@jvosburgh.net> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250306023923.38777-2-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Matt Johnston [Thu, 6 Mar 2025 02:32:45 +0000 (10:32 +0800)]
net: mctp: unshare packets when reassembling
Ensure that the frag_list used for reassembly isn't shared with other
packets. This avoids incorrect reassembly when packets are cloned, and
prevents a memory leak due to circular references between fragments and
their skb_shared_info.
The upcoming MCTP-over-USB driver uses skb_clone which can trigger the
problem - other MCTP drivers don't share SKBs.
Kees Cook [Mon, 10 Mar 2025 22:25:31 +0000 (15:25 -0700)]
vboxsf: Add __nonstring annotations for unterminated strings
When a character array without a terminating NUL character has a static
initializer, GCC 15's -Wunterminated-string-initialization will only
warn if the array lacks the "nonstring" attribute[1]. Mark the arrays
with __nonstring to and correctly identify the char array as "not a C
string" and thereby eliminate the warning.
This effectively reverts the change in 4e7487245abc ("vboxsf: fix building
with GCC 15"), to add the annotation that has other uses (i.e. warning
if the string is ever used with C string APIs).
Piotr Jaroszynski [Tue, 4 Mar 2025 08:51:27 +0000 (00:51 -0800)]
Fix mmu notifiers for range-based invalidates
Update the __flush_tlb_range_op macro not to modify its parameters as
these are unexepcted semantics. In practice, this fixes the call to
mmu_notifier_arch_invalidate_secondary_tlbs() in
__flush_tlb_range_nosync() to use the correct range instead of an empty
range with start=end. The empty range was (un)lucky as it results in
taking the invalidate-all path that doesn't cause correctness issues,
but can certainly result in suboptimal perf.
This has been broken since commit 6bbd42e2df8f ("mmu_notifiers: call
invalidate_range() when invalidating TLBs") when the call to the
notifiers was added to __flush_tlb_range(). It predates the addition of
the __flush_tlb_range_op() macro from commit 360839027a6e ("arm64: tlb:
Refactor the core flush algorithm of __flush_tlb_range") that made the
bug hard to spot.
Fixes: 6bbd42e2df8f ("mmu_notifiers: call invalidate_range() when invalidating TLBs") Signed-off-by: Piotr Jaroszynski <pjaroszynski@nvidia.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Raghavendra Rao Ananta <rananta@google.com> Cc: SeongJae Park <sj@kernel.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Nicolin Chen <nicolinc@nvidia.com> Cc: linux-arm-kernel@lists.infradead.org Cc: iommu@lists.linux.dev Cc: linux-mm@kvack.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Link: https://lore.kernel.org/r/20250304085127.2238030-1-pjaroszynski@nvidia.com Signed-off-by: Will Deacon <will@kernel.org>
Zhenhua Huang [Tue, 4 Mar 2025 07:27:00 +0000 (15:27 +0800)]
arm64: mm: Populate vmemmap at the page level if not section aligned
On the arm64 platform with 4K base page config, SECTION_SIZE_BITS is set
to 27, making one section 128M. The related page struct which vmemmap
points to is 2M then.
Commit c1cc1552616d ("arm64: MMU initialisation") optimizes the
vmemmap to populate at the PMD section level which was suitable
initially since hot plug granule is always one section(128M). However,
commit ba72b4c8cf60 ("mm/sparsemem: support sub-section hotplug")
introduced a 2M(SUBSECTION_SIZE) hot plug granule, which disrupted the
existing arm64 assumptions.
The first problem is that if start or end is not aligned to a section
boundary, such as when a subsection is hot added, populating the entire
section is wasteful.
The next problem is if we hotplug something that spans part of 128 MiB
section (subsections, let's call it memblock1), and then hotplug something
that spans another part of a 128 MiB section(subsections, let's call it
memblock2), and subsequently unplug memblock1, vmemmap_free() will clear
the entire PMD entry which also supports memblock2 even though memblock2
is still active.
Assuming hotplug/unplug sizes are guaranteed to be symmetric. Do the
fix similar to x86-64: populate to pages levels if start/end is not aligned
with section boundary.
Cc: stable@vger.kernel.org # v5.4+ Fixes: ba72b4c8cf60 ("mm/sparsemem: support sub-section hotplug") Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20250304072700.3405036-1-quic_zhenhuah@quicinc.com Signed-off-by: Will Deacon <will@kernel.org>
Amit Cohen [Wed, 5 Mar 2025 12:15:09 +0000 (14:15 +0200)]
net: switchdev: Convert blocking notification chain to a raw one
A blocking notification chain uses a read-write semaphore to protect the
integrity of the chain. The semaphore is acquired for writing when
adding / removing notifiers to / from the chain and acquired for reading
when traversing the chain and informing notifiers about an event.
In case of the blocking switchdev notification chain, recursive
notifications are possible which leads to the semaphore being acquired
twice for reading and to lockdep warnings being generated [1].
Specifically, this can happen when the bridge driver processes a
SWITCHDEV_BRPORT_UNOFFLOADED event which causes it to emit notifications
about deferred events when calling switchdev_deferred_process().
Fix this by converting the notification chain to a raw notification
chain in a similar fashion to the netdev notification chain. Protect
the chain using the RTNL mutex by acquiring it when modifying the chain.
Events are always informed under the RTNL mutex, but add an assertion in
call_switchdev_blocking_notifiers() to make sure this is not violated in
the future.
Maintain the "blocking" prefix as events are always emitted from process
context and listeners are allowed to block.
[1]:
WARNING: possible recursive locking detected 6.14.0-rc4-custom-g079270089484 #1 Not tainted
--------------------------------------------
ip/52731 is trying to acquire lock: ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0
but task is already holding lock: ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock((switchdev_blocking_notif_chain).rwsem);
lock((switchdev_blocking_notif_chain).rwsem);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by ip/52731:
#0: ffffffff84f795b0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_newlink+0x727/0x1dc0
#1: ffffffff8731f628 (&net->rtnl_mutex){+.+.}-{4:4}, at: rtnl_newlink+0x790/0x1dc0
#2: ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0
Imre Deak [Fri, 7 Mar 2025 18:31:52 +0000 (20:31 +0200)]
drm/dp_mst: Fix locking when skipping CSN before topology probing
The handling of the MST Connection Status Notify message is skipped if
the probing of the topology is still pending. Acquiring the
drm_dp_mst_topology_mgr::probe_lock for this in
drm_dp_mst_handle_up_req() is problematic: the task/work this function
is called from is also responsible for handling MST down-request replies
(in drm_dp_mst_handle_down_rep()). Thus drm_dp_mst_link_probe_work() -
holding already probe_lock - could be blocked waiting for an MST
down-request reply while drm_dp_mst_handle_up_req() is waiting for
probe_lock while processing a CSN message. This leads to the probe
work's down-request message timing out.
A scenario similar to the above leading to a down-request timeout is
handling a CSN message in drm_dp_mst_handle_conn_stat(), holding the
probe_lock and sending down-request messages while a second CSN message
sent by the sink subsequently is handled by drm_dp_mst_handle_up_req().
Fix the above by moving the logic to skip the CSN handling to
drm_dp_mst_process_up_req(). This function is called from a work
(separate from the task/work handling new up/down messages), already
holding probe_lock. This solves the above timeout issue, since handling
of down-request replies won't be blocked by probe_lock.
Fixes: ddf983488c3e ("drm/dp_mst: Skip CSN if topology probing is not done yet") Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org # v6.6+ Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250307183152.3822170-1-imre.deak@intel.com
====================
eth: bnxt: fix several bugs in the bnxt module
The first fixes setting incorrect skb->truesize.
When xdp-mb prog returns XDP_PASS, skb is allocated and initialized.
Currently, The truesize is calculated as BNXT_RX_PAGE_SIZE *
sinfo->nr_frags, but sinfo->nr_frags is flushed by napi_build_skb().
So, it stores sinfo before calling napi_build_skb() and then use it
for calculate truesize.
The second fixes kernel panic in the bnxt_queue_mem_alloc().
The bnxt_queue_mem_alloc() accesses rx ring descriptor.
rx ring descriptors are allocated when the interface is up and it's
freed when the interface is down.
So, if bnxt_queue_mem_alloc() is called when the interface is down,
kernel panic occurs.
This patch makes the bnxt_queue_mem_alloc() return -ENETDOWN if rx ring
descriptors are not allocated.
The third patch fixes kernel panic in the bnxt_queue_{start | stop}().
When a queue is restarted bnxt_queue_{start | stop}() are called.
These functions set MRU to 0 to stop packet flow and then to set up the
remaining things.
MRU variable is a member of vnic_info[] the first vnic_info is for
default and the second is for ntuple.
The first vnic_info is always allocated when interface is up, but the
second is allocated only when ntuple is enabled.
(ethtool -K eth0 ntuple <on | off>).
Currently, the bnxt_queue_{start | stop}() access
vnic_info[BNXT_VNIC_NTUPLE] regardless of whether ntuple is enabled or
not.
So kernel panic occurs.
This patch make the bnxt_queue_{start | stop}() use bp->nr_vnics instead
of BNXT_VNIC_NTUPLE.
The fourth patch fixes a warning due to checksum state.
The bnxt_rx_pkt() checks whether skb->ip_summed is not CHECKSUM_NONE
before updating ip_summed. if ip_summed is not CHECKSUM_NONE, it WARNS
about it. However, the bnxt_xdp_build_skb() is called in XDP-MB-PASS
path and it updates ip_summed earlier than bnxt_rx_pkt().
So, in the XDP-MB-PASS path, the bnxt_rx_pkt() always warns about
checksum.
Updating ip_summed at the bnxt_xdp_build_skb() is unnecessary and
duplicate, so it is removed.
The fifth patch fixes a kernel panic in the
bnxt_get_queue_stats{rx | tx}().
The bnxt_get_queue_stats{rx | tx}() callback functions are called when
a queue is resetting.
These internally access rx and tx rings without null check, but rings
are allocated and initialized when the interface is up.
So, these functions are called when the interface is down, it
occurs a kernel panic.
The sixth patch fixes memory leak in queue reset logic.
When a queue is resetting, tpa_info is allocated for the new queue and
tpa_info for an old queue is not used anymore.
So it should be freed, but not.
The seventh patch makes net_devmem_unbind_dmabuf() ignore -ENETDOWN.
When devmem socket is closed, net_devmem_unbind_dmabuf() is called to
unbind/release resources.
If interface is down, the driver returns -ENETDOWN.
The -ENETDOWN return value is not an actual error, because the interface
will release resources when the interface is down.
So, net_devmem_unbind_dmabuf() needs to ignore -ENETDOWN.
The last patch adds XDP testcases to
tools/testing/selftests/drivers/net/ping.py.
====================
Taehee Yoo [Sun, 9 Mar 2025 13:42:19 +0000 (13:42 +0000)]
selftests: drv-net: add xdp cases for ping.py
ping.py has 3 cases, test_v4, test_v6 and test_tcp.
But these cases are not executed on the XDP environment.
So, it adds XDP environment, existing tests(test_v4, test_v6, and
test_tcp) are executed too on the below XDP environment.
So, it adds XDP cases.
1. xdp-generic + single-buffer
2. xdp-generic + multi-buffer
3. xdp-native + single-buffer
4. xdp-native + multi-buffer
5. xdp-offload
It also makes test_{v4 | v6 | tcp} sending large size packets. this may
help to check whether multi-buffer is working or not.
Note that the physical interface may be down and then up when xdp is
attached or detached.
This takes some period to activate traffic. So sleep(10) is
added if the test interface is the physical interface.
netdevsim and veth type interfaces skip sleep.
Taehee Yoo [Sun, 9 Mar 2025 13:42:18 +0000 (13:42 +0000)]
net: devmem: do not WARN conditionally after netdev_rx_queue_restart()
When devmem socket is closed, netdev_rx_queue_restart() is called to
reset queue by the net_devmem_unbind_dmabuf(). But callback may return
-ENETDOWN if the interface is down because queues are already freed
when the interface is down so queue reset is not needed.
So, it should not warn if the return value is -ENETDOWN.
projects / users / hch / misc.git / log