dt-bindings: cpufreq: cpufreq-qcom-hw: Add missing constraint for interrupt-names

When narrowing properties per variant, the 'interrupt-names' should have
the same constraints as 'interrupts'.  Add missing upper bound on the
property.

Fixes: e69003202434 ("dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCM2290")
Fixes: 7ae24e054f75 ("dt-bindings: cpufreq: cpufreq-qcom-hw: Sanitize data per compatible")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCS8300 compatible

Document compatible for cpufreq hardware on Qualcomm QCS8300 platform.

Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

cpufreq: Init cpufreq only for present CPUs

for_each_possible_cpu() is currently used to initialize cpufreq.
However, in cpu_dev_register_generic(), for_each_present_cpu()
is used to register CPU devices which means the CPU devices are
only registered for present CPUs and not all possible CPUs.

With nosmp or maxcpus=0, only the boot CPU is present, lead
to the cpufreq probe failure or defer probe due to no cpu device
available for not present CPUs.

Change for_each_possible_cpu() to for_each_present_cpu() in the
above cpufreq drivers to ensure it only registers cpufreq for
CPUs that are actually present.

Fixes: b0c69e1214bc ("drivers: base: Use present CPUs in GENERIC_CPU_DEVICES")
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

cpufreq: tegra186: Share policy per cluster

This functionally brings tegra186 in line with tegra210 and tegra194,
sharing a cpufreq policy between all cores in a cluster.

Reviewed-by: Sumit Gupta <sumitg@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

cpufreq: tegra194: Allow building for Tegra234

Support was added for Tegra234 in the referenced commit, but the Kconfig
was not updated to allow building for the arch.

Fixes: 273bc890a2a8 ("cpufreq: tegra194: Add support for Tegra234")
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

cpufreq: enable 1200Mhz clock speed for armada-37xx

This frequency was disabled because of stability problems whose source could
not be accurately identified[1]. After seven months of testing, the evidence
points to an incorrectly configured bootloader as the source of the historical
instability. Testing was performed on two A3720 devices with this frequency
enabled and the ondemand policy in use. Marvell merged[2] changes to their
bootloader source needed to address the stability issue. This driver should
expose this frequency option to users.

[1] https://github.com/torvalds/linux/commit/484f2b7c61b9ae58cc00c5127bcbcd9177af8dfe
[2] https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell/pull/44

Signed-off-by: Benjamin Schneider <ben@bens.haus>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

cpufreq: Remove cpufreq_enable_boost_support()

Remove the now unused helper, cpufreq_enable_boost_support().

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

cpufreq: staticize policy_has_boost_freq()

policy_has_boost_freq() isn't used outside of freq_table.c now, mark it
static.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

cpufreq: qcom: Set .set_boost directly

The boost feature can be controlled at two levels currently, driver
level (applies to all policies) and per-policy.

Currently the driver enables driver level boost support from the
per-policy ->init() callback, which isn't really efficient as that gets
called for each policy and then there is online/offline path too where
this gets done unnecessarily.

Instead set the .set_boost field directly and always enable the boost
support. If a policy doesn't support boost feature, the core will not
enable it for that policy.

Keep the initial state of driver level boost to disabled and let the
user enable it if required as ideally the boost frequencies must be used
only when really required.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

cpufreq: dt: Set .set_boost directly

The boost feature can be controlled at two levels currently, driver
level (applies to all policies) and per-policy.

Currently the driver enables driver level boost support from the
per-policy ->init() callback, which isn't really efficient as that gets
called for each policy and then there is online/offline path too where
this gets done unnecessarily.

Instead set the .set_boost field directly and always enable the boost
support. If a policy doesn't support boost feature, the core will not
enable it for that policy.

Keep the initial state of driver level boost to disabled and let the
user enable it if required as ideally the boost frequencies must be used
only when really required.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

cpufreq: scmi: Set .set_boost directly

The boost feature can be controlled at two levels currently, driver
level (applies to all policies) and per-policy.

Currently the driver enables driver level boost support from the
per-policy ->init() callback, which isn't really efficient as that gets
called for each policy and then there is online/offline path too where
this gets done unnecessarily.

Instead set the .set_boost field directly and always enable the boost
support. If a policy doesn't support boost feature, the core will not
enable it for that policy.

Keep the initial state of driver level boost to disabled and let the
user enable it if required as ideally the boost frequencies must be used
only when really required.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>

cpufreq: powernv: Set .set_boost directly

The boost feature can be controlled at two levels currently, driver
level (applies to all policies) and per-policy.

Currently the driver enables driver level boost support from the
per-policy ->init() callback, which isn't really efficient as that gets
called for each policy and then there is online/offline path too where
this gets done unnecessarily.

Instead set the .set_boost field directly and always enable the boost
support. If a policy doesn't support boost feature, the core will not
enable it for that policy.

Keep the initial state of driver level boost to disabled and let the
user enable it if required as ideally the boost frequencies must be used
only when really required.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

cpufreq: loongson: Set .set_boost directly

The boost feature can be controlled at two levels currently, driver
level (applies to all policies) and per-policy.

Currently the driver enables driver level boost support from the
per-policy ->init() callback, which isn't really efficient as that gets
called for each policy and then there is online/offline path too where
this gets done unnecessarily.

Instead set the .set_boost field directly and always enable the boost
support. If a policy doesn't support boost feature, the core will not
enable it for that policy.

Keep the initial state of driver level boost to disabled and let the
user enable it if required as ideally the boost frequencies must be used
only when really required.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

cpufreq: apple: Set .set_boost directly

The boost feature can be controlled at two levels currently, driver
level (applies to all policies) and per-policy.

Currently the driver enables driver level boost support from the
per-policy ->init() callback, which isn't really efficient as that gets
called for each policy and then there is online/offline path too where
this gets done unnecessarily.

Instead set the .set_boost field directly and always enable the boost
support. If a policy doesn't support boost feature, the core will not
enable it for that policy.

Keep the initial state of driver level boost to disabled and let the
user enable it if required as ideally the boost frequencies must be used
only when really required.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

cpufreq: Restrict enabling boost on policies with no boost frequencies

It is possible to have a scenario where not all cpufreq policies support
boost frequencies. And letting sysfs (or other parts of the kernel)
enable boost feature for that policy isn't correct.

Now that all drivers (that required a change) are updated to set the
policy->boost_supported properly, check this flag before enabling boost
feature for a policy.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

cpufreq: cppc: Set policy->boost_supported

With a later commit, the cpufreq core will call the ->set_boost()
callback only if the policy supports boost frequency. The
boost_supported flag is set by the cpufreq core if policy->freq_table is
set and one or more boost frequencies are present.

For other drivers, the flag must be set explicitly.

With this, the local variable boost_supported isn't required anymore.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

cpufreq: amd: Set policy->boost_supported

With a later commit, the cpufreq core will call the ->set_boost()
callback only if the policy supports boost frequency. The
boost_supported flag is set by the cpufreq core if policy->freq_table is
set and one or more boost frequencies are present.

For other drivers, the flag must be set explicitly.

The policy->boost_enabled flag is set by the cpufreq core once the
policy is initialized, don't set it anymore.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

cpufreq: acpi: Set policy->boost_supported

With a later commit, the cpufreq core will call the ->set_boost()
callback only if the policy supports boost frequency. The
boost_supported flag is set by the cpufreq core if policy->freq_table is
set and one or more boost frequencies are present.

For other drivers, the flag must be set explicitly.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

cpufreq: Introduce policy->boost_supported flag

It is possible to have a scenario where not all cpufreq policies support
boost frequencies. And letting sysfs (or other parts of the kernel)
enable boost feature for that policy isn't correct.

Add a new flag, boost_supported, which will be set to true by the
cpufreq core only if the freq table contains valid boost frequencies.

Some cpufreq drivers though don't have boost frequencies in the
freq-table, they can set this flag from their ->init() callbacks.

Once all the drivers are updated to set the flag correctly, we can check
it before enabling boost feature for a policy.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

cpufreq: Export cpufreq_boost_set_sw()

This will be used directly by cpufreq driver going forward, export it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

cpufreq: staticize cpufreq_boost_trigger_state()

cpufreq_boost_trigger_state() is only used by cpufreq core, mark it
static.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

cpufreq: Stop checking for duplicate available/boost freq attributes

None of the drivers set these attributes directly now, remove the
unnecessary check.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: Remove cpufreq_generic_attrs

All users of cpufreq_generic_attr are migrated now, remove it. While at
it, also stop exporting attributes for available and boost frequencies
as they are only used by cpufreq core now.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: virtual: Stop setting cpufreq_driver->attr field

The cpufreq core now handles this for basic attributes, including boost
frequencies, the driver can skip setting them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: vexpress: Stop setting cpufreq_driver->attr field

The cpufreq core now handles this for basic attributes, including boost
frequencies, the driver can skip setting them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: tegra: Stop setting cpufreq_driver->attr field

The cpufreq core now handles this for basic attributes, including boost
frequencies, the driver can skip setting them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: speedstep: Stop setting cpufreq_driver->attr field

The cpufreq core now handles this for basic attributes, including boost
frequencies, the driver can skip setting them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: spear: Stop setting cpufreq_driver->attr field

The cpufreq core now handles this for basic attributes, including boost
frequencies, the driver can skip setting them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: sh: Stop setting cpufreq_driver->attr field

The cpufreq core now handles this for basic attributes, including boost
frequencies, the driver can skip setting them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: scpi: Stop setting cpufreq_driver->attr field

The cpufreq core now handles this for basic attributes, including boost
frequencies, the driver can skip setting them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: scmi: Stop setting cpufreq_driver->attr field

The cpufreq core now handles this for basic attributes, including boost
frequencies, the driver can skip setting them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: sc520_freq: Stop setting cpufreq_driver->attr field

The cpufreq core now handles this for basic attributes, including boost
frequencies, the driver can skip setting them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: qoriq: Stop setting cpufreq_driver->attr field

The cpufreq core now handles this for basic attributes, including boost
frequencies, the driver can skip setting them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: qcom: Stop setting cpufreq_driver->attr field

The cpufreq core now handles this for basic attributes, including boost
frequencies, the driver can skip setting them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: powernv: Stop setting common freq attributes

The cpufreq core handles this now, the driver can skip setting it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: powernow: Stop setting cpufreq_driver->attr field

The cpufreq core now handles this for basic attributes, including boost
frequencies, the driver can skip setting them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: pmac: Stop setting cpufreq_driver->attr field

The cpufreq core now handles this for basic attributes, including boost
frequencies, the driver can skip setting them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: pasemi: Stop setting cpufreq_driver->attr field

The cpufreq core now handles this for basic attributes, including boost
frequencies, the driver can skip setting them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: p4: Stop setting cpufreq_driver->attr field

The cpufreq core now handles this for basic attributes, including boost
frequencies, the driver can skip setting them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: omap: Stop setting cpufreq_driver->attr field

The cpufreq core now handles this for basic attributes, including boost
frequencies, the driver can skip setting them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: mediatek: Stop setting cpufreq_driver->attr field

The cpufreq core now handles this for basic attributes, including boost
frequencies, the driver can skip setting them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: loongson: Stop setting cpufreq_driver->attr field

The cpufreq core now handles this for basic attributes, including boost
frequencies, the driver can skip setting them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: longhaul: Stop setting cpufreq_driver->attr field

The cpufreq core now handles this for basic attributes, including boost
frequencies, the driver can skip setting them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: kirkwood: Stop setting cpufreq_driver->attr field

The cpufreq core now handles this for basic attributes, including boost
frequencies, the driver can skip setting them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: imx6q: Stop setting cpufreq_driver->attr field

The cpufreq core now handles this for basic attributes, including boost
frequencies, the driver can skip setting them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: elanfreq: Stop setting cpufreq_driver->attr field

The cpufreq core now handles this for basic attributes, including boost
frequencies, the driver can skip setting them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: e_powersaver: Stop setting cpufreq_driver->attr field

The cpufreq core now handles this for basic attributes, including boost
frequencies, the driver can skip setting them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: davinci: Stop setting cpufreq_driver->attr field

The cpufreq core now handles this for basic attributes, including boost
frequencies, the driver can skip setting them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: brcmstb: Stop setting common freq attributes

The cpufreq core handles this now, the driver can skip setting it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: bmips: Stop setting cpufreq_driver->attr field

The cpufreq core now handles this for basic attributes, including boost
frequencies, the driver can skip setting them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: apple: Stop setting cpufreq_driver->attr field

The cpufreq core now handles this for basic attributes, including boost
frequencies, the driver can skip setting them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: acpi: Stop setting common freq attributes

The core handles this now, the driver can skip setting it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: dt: Stop setting cpufreq_driver->attr field

The cpufreq core now handles this for basic attributes, including boost
frequencies, the driver can skip setting them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: Always create freq-table related sysfs file

Currently it is left for the individual drivers to set the available and
boost frequencies related attributes in the cpufreq_driver->attr field.
Some drivers provide them, while others don't.

A quick search revealed that only the drivers that set the
policy->freq_table field, enable these attributes. Which makes sense as
well, since the show_available_freqs() helper works only if the
freq_table is present.

In order to simplify drivers, create the relevant sysfs files forcefully
from cpufreq core.

For now, skip adding them twice. This can be removed once all the
drivers are updated.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>

cpufreq: Use str_enable_disable() helper

Commit f994c1cb6c43 ("cpufreq: Use str_enable_disable()-like helpers") has
already introduced helpers from string_choices.h and replaced ternary
syntax with it. Use str_enable_disable() helper in this line to stay
consistent.

Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

cpufreq: amd-pstate: Remove unnecessary driver_lock in set_boost

set_boost is a per-policy function call, hence a driver wide lock is
unnecessary. Also this mutex_acquire can collide with the mutex_acquire
from the mode-switch path in status_store(), which can lead to a
deadlock. So, remove it.

Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

cpufreq: scpi: compare kHz instead of Hz

The CPU rate from clk_get_rate() may not be divisible by 1000
(e.g., 133333333). But the rate calculated from frequency(kHz) is
always divisible by 1000 (e.g., 133333000).
Comparing the rate causes a warning during CPU scaling:
"cpufreq: __target_index: Failed to change cpu frequency: -5".
When we choose to compare kHz here, the issue does not occur.

Fixes: 343a8d17fa8d ("cpufreq: scpi: remove arm_big_little dependency")
Signed-off-by: zuoqian <zuoqian113@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

cpufreq: prevent NULL dereference in cpufreq_online()

Ensure cpufreq_driver->set_boost is non-NULL before using it in
cpufreq_online() to prevent a potential NULL pointer dereference.

Reported-by: Gautam Menghani <gautam@linux.ibm.com>
Closes: https://lore.kernel.org/all/c9e56c5f54cc33338762c94e9bed7b5a0d5de812.camel@linux.ibm.com/
Fixes: dd016f379ebc ("cpufreq: Introduce a more generic way to set default per-policy boost flag")
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Link: https://patch.msgid.link/20250205181347.2079272-1-aboorvad@linux.ibm.com
[ rjw: Minor edits in the subject and changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

cpufreq: airoha: modify CONFIG_OF dependency

Compile-testing without CONFIG_OF leads to a harmless build warning:

drivers/cpufreq/airoha-cpufreq.c:109:34: error: 'airoha_cpufreq_match_list' defined but not used [-Werror=unused-const-variable=]
  109 | static const struct of_device_id airoha_cpufreq_match_list[] __initconst = {
      |                                  ^~~~~~~~~~~~~~~~~~~~~~~~~

It would be possible to mark the variable as __maybe_unused to shut up
that warning, but a Kconfig dependency seems more appropriate as this still
allows build testing in allmodconfig and randconfig builds on all
architectures.

An earlier commit, b865a8404642 ("cpufreq: airoha: Depends on OF"),
tried to fix it incorrectly. ARCH_AIROHA already requires CONFIG_OF, so
this change does nothing, and the dependency is still missing for the
COMPILE_TEST case.

Fix it properly.

Fixes: 84cf9e541ccc ("cpufreq: airoha: Add EN7581 CPUFreq SMCCC driver")
Fixes: b865a8404642 ("cpufreq: airoha: Depends on OF")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[ Viresh: updated commit log and fixed rebase conflict ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/9d51d2710061dfa7f2568287c6ed125b858b7318.1738580005.git.viresh.kumar@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Linux 6.14-rc1

Merge tag 'turbostat-2025.02.02' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux

Pull turbostat updates from Len Brown:

 - Fix regression that affinitized forked child in one-shot mode.

 - Harden one-shot mode against hotplug online/offline

 - Enable RAPL SysWatt column by default

 - Add initial PTL, CWF platform support

 - Harden initial PMT code in response to early use

 - Enable first built-in PMT counter: CWF c1e residency

 - Refuse to run on unsupported platforms without --force, to encourage
   updating to a version that supports the system, and to avoid
   no-so-useful measurement results

* tag 'turbostat-2025.02.02' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (25 commits)
  tools/power turbostat: version 2025.02.02
  tools/power turbostat: Add CPU%c1e BIC for CWF
  tools/power turbostat: Harden one-shot mode against cpu offline
  tools/power turbostat: Fix forked child affinity regression
  tools/power turbostat: Add tcore clock PMT type
  tools/power turbostat: version 2025.01.14
  tools/power turbostat: Allow adding PMT counters directly by sysfs path
  tools/power turbostat: Allow mapping multiple PMT files with the same GUID
  tools/power turbostat: Add PMT directory iterator helper
  tools/power turbostat: Extend PMT identification with a sequence number
  tools/power turbostat: Return default value for unmapped PMT domains
  tools/power turbostat: Check for non-zero value when MSR probing
  tools/power turbostat: Enhance turbostat self-performance visibility
  tools/power turbostat: Add fixed RAPL PSYS divisor for SPR
  tools/power turbostat: Fix PMT mmaped file size rounding
  tools/power turbostat: Remove SysWatt from DISABLED_BY_DEFAULT
  tools/power turbostat: Add an NMI column
  tools/power turbostat: add Busy% to "show idle"
  tools/power turbostat: Introduce --force parameter
  tools/power turbostat: Improve --help output
  ...

Merge tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux

Pull sh updates from John Paul Adrian Glaubitz:
 "Fixes and improvements for sh:

   - replace seq_printf() with the more efficient
     seq_put_decimal_ull_width() to increase performance when stress
     reading /proc/interrupts (David Wang)

   - migrate sh to the generic rule for built-in DTB to help avoid race
     conditions during parallel builds which can occur because Kbuild
     decends into arch/*/boot/dts twice (Masahiro Yamada)

   - replace select with imply in the board Kconfig for enabling
     hardware with complex dependencies. This addresses warnings which
     were reported by the kernel test robot (Geert Uytterhoeven)"

* tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
  sh: boards: Use imply to enable hardware with complex dependencies
  sh: Migrate to the generic rule for built-in DTB
  sh: irq: Use seq_put_decimal_ull_width() for decimal values

tools/power turbostat: version 2025.02.02

Summary of Changes since 2024.11.30:

Fix regression in 2023.11.07 that affinitized forked child
in one-shot mode.

Harden one-shot mode against hotplug online/offline

Enable RAPL SysWatt column by default.

Add initial PTL, CWF platform support.

Harden initial PMT code in response to early use.

Enable first built-in PMT counter: CWF c1e residency

Refuse to run on unsupported platforms without --force,
to encourage updating to a version that supports the system,
and to avoid no-so-useful measurement results.

Signed-off-by: Len Brown <len.brown@intel.com>

Merge tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

Pull misc vfs cleanups from Al Viro:
 "Two unrelated patches - one is a removal of long-obsolete include in
  overlayfs (it used to need fs/internal.h, but the extern it wanted has
  been moved back to include/linux/namei.h) and another introduces
  convenience helper constructing struct qstr by a NUL-terminated
  string"

* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  add a string-to-qstr constructor
  fs/overlayfs/namei.c: get rid of include ../internal.h

Merge tag 'mips_6.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS fix from Thomas Bogendoerfer:
 "Revert commit breaking sysv ipc for o32 ABI"

* tag 'mips_6.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  Revert "mips: fix shmctl/semctl/msgctl syscall for o32"

Merge tag 'v6.14-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6

Pull more smb client updates from Steve French:

   - various updates for special file handling: symlink handling,
     support for creating sockets, cleanups, new mount options (e.g. to
     allow disabling using reparse points for them, and to allow
     overriding the way symlinks are saved), and fixes to error paths

   - fix for kerberos mounts (allow IAKerb)

   - SMB1 fix for stat and for setting SACL (auditing)

   - fix an incorrect error code mapping

   - cleanups"

* tag 'v6.14-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: (21 commits)
  cifs: Fix parsing native symlinks directory/file type
  cifs: update internal version number
  cifs: Add support for creating WSL-style symlinks
  smb3: add support for IAKerb
  cifs: Fix struct FILE_ALL_INFO
  cifs: Add support for creating NFS-style symlinks
  cifs: Add support for creating native Windows sockets
  cifs: Add mount option -o reparse=none
  cifs: Add mount option -o symlink= for choosing symlink create type
  cifs: Fix creating and resolving absolute NT-style symlinks
  cifs: Simplify reparse point check in cifs_query_path_info() function
  cifs: Remove symlink member from cifs_open_info_data union
  cifs: Update description about ACL permissions
  cifs: Rename struct reparse_posix_data to reparse_nfs_data_buffer and move to common/smb2pdu.h
  cifs: Remove struct reparse_posix_data from struct cifs_open_info_data
  cifs: Remove unicode parameter from parse_reparse_point() function
  cifs: Fix getting and setting SACLs over SMB1
  cifs: Remove intermediate object of failed create SFU call
  cifs: Validate EAs for WSL reparse points
  cifs: Change translation of STATUS_PRIVILEGE_NOT_HELD to -EPERM
  ...

Merge tag 'driver-core-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull debugfs fix from Greg KH:
 "Here is a single debugfs fix from Al to resolve a reported regression
  in the driver-core tree. It has been reported to fix the issue"

* tag 'driver-core-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  debugfs: Fix the missing initializations in __debugfs_file_get()

Merge tag 'mm-hotfixes-stable-2025-02-01-03-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "21 hotfixes. 8 are cc:stable and the remainder address post-6.13
  issues. 13 are for MM and 8 are for non-MM.

  All are singletons, please see the changelogs for details"

* tag 'mm-hotfixes-stable-2025-02-01-03-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
  MAINTAINERS: include linux-mm for xarray maintenance
  revert "xarray: port tests to kunit"
  MAINTAINERS: add lib/test_xarray.c
  mailmap, MAINTAINERS, docs: update Carlos's email address
  mm/hugetlb: fix hugepage allocation for interleaved memory nodes
  mm: gup: fix infinite loop within __get_longterm_locked
  mm, swap: fix reclaim offset calculation error during allocation
  .mailmap: update email address for Christopher Obbard
  kfence: skip __GFP_THISNODE allocations on NUMA systems
  nilfs2: fix possible int overflows in nilfs_fiemap()
  mm: compaction: use the proper flag to determine watermarks
  kernel: be more careful about dup_mmap() failures and uprobe registering
  mm/fake-numa: handle cases with no SRAT info
  mm: kmemleak: fix upper boundary check for physical address objects
  mailmap: add an entry for Hamza Mahfooz
  MAINTAINERS: mailmap: update Yosry Ahmed's email address
  scripts/gdb: fix aarch64 userspace detection in get_current_task
  mm/vmscan: accumulate nr_demoted for accurate demotion statistics
  ocfs2: fix incorrect CPU endianness conversion causing mount failure
  mm/zsmalloc: add __maybe_unused attribute for is_first_zpdesc()
  ...

Merge tag 'media/v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media fix from Mauro Carvalho Chehab:
 "A revert for a regression in the uvcvideo driver"

* tag 'media/v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  Revert "media: uvcvideo: Require entities to have a non-zero unique ID"

MAINTAINERS: include linux-mm for xarray maintenance

MM developers have an interest in the xarray code.

Cc: David Gow <davidgow@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Tamir Duberstein <tamird@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

revert "xarray: port tests to kunit"

Revert c7bb5cf9fc4e ("xarray: port tests to kunit").  It broke the build
when compiing the xarray userspace test harness code.

Reported-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Closes: https://lkml.kernel.org/r/07cf896e-adf8-414f-a629-a808fc26014a@oracle.com
Cc: David Gow <davidgow@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tamir Duberstein <tamird@gmail.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

MAINTAINERS: add lib/test_xarray.c

Ensure test-only changes are sent to the relevant maintainer.

Link: https://lkml.kernel.org/r/20250129-xarray-test-maintainer-v1-1-482e31f30f47@gmail.com
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Cc: Mattew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mailmap, MAINTAINERS, docs: update Carlos's email address

Update .mailmap to reflect my new (and final) primary email address,
carlos.bilbao@kernel.org.  Also update contact information in files
Documentation/translations/sp_SP/index.rst and MAINTAINERS.

Link: https://lkml.kernel.org/r/20250130012248.1196208-1-carlos.bilbao@kernel.org
Signed-off-by: Carlos Bilbao <carlos.bilbao@kernel.org>
Cc: Carlos Bilbao <bilbao@vt.edu>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mattew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/hugetlb: fix hugepage allocation for interleaved memory nodes

gather_bootmem_prealloc() assumes the start nid as 0 and size as
num_node_state(N_MEMORY).  That means in case if memory attached numa
nodes are interleaved, then gather_bootmem_prealloc_parallel() will fail
to scan few of these nodes.

Since memory attached numa nodes can be interleaved in any fashion, hence
ensure that the current code checks for all numa node ids
(.size = nr_node_ids). Let's still keep max_threads as N_MEMORY, so that
it can distributes all nr_node_ids among the these many no. threads.

e.g. qemu cmdline
========================
numa_cmd="-numa node,nodeid=1,memdev=mem1,cpus=2-3 -numa node,nodeid=0,cpus=0-1 -numa dist,src=0,dst=1,val=20"
mem_cmd="-object memory-backend-ram,id=mem1,size=16G"

w/o this patch for cmdline (default_hugepagesz=1GB hugepagesz=1GB hugepages=2):
==========================
~ # cat /proc/meminfo  |grep -i huge
AnonHugePages:         0 kB
ShmemHugePages:        0 kB
FileHugePages:         0 kB
HugePages_Total:       0
HugePages_Free:        0
HugePages_Rsvd:        0
HugePages_Surp:        0
Hugepagesize:    1048576 kB
Hugetlb:               0 kB

with this patch for cmdline (default_hugepagesz=1GB hugepagesz=1GB hugepages=2):
===========================
~ # cat /proc/meminfo |grep -i huge
AnonHugePages:         0 kB
ShmemHugePages:        0 kB
FileHugePages:         0 kB
HugePages_Total:       2
HugePages_Free:        2
HugePages_Rsvd:        0
HugePages_Surp:        0
Hugepagesize:    1048576 kB
Hugetlb:         2097152 kB

Link: https://lkml.kernel.org/r/f8d8dad3a5471d284f54185f65d575a6aaab692b.1736592534.git.ritesh.list@gmail.com
Fixes: b78b27d02930 ("hugetlb: parallelize 1G hugetlb initialization")
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reported-by: Pavithra Prakash <pavrampu@linux.ibm.com>
Suggested-by: Muchun Song <muchun.song@linux.dev>
Tested-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Reviewed-by: Luiz Capitulino <luizcap@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: Gang Li <gang.li@linux.dev>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: gup: fix infinite loop within __get_longterm_locked

We can run into an infinite loop in __get_longterm_locked() when
collect_longterm_unpinnable_folios() finds only folios that are isolated
from the LRU or were never added to the LRU.  This can happen when all
folios to be pinned are never added to the LRU, for example when
vm_ops->fault allocated pages using cma_alloc() and never added them to
the LRU.

Fix it by simply taking a look at the list in the single caller, to see if
anything was added.

[zhaoyang.huang@unisoc.com: move definition of local]
Link: https://lkml.kernel.org/r/20250122012604.3654667-1-zhaoyang.huang@unisoc.com
Link: https://lkml.kernel.org/r/20250121020159.3636477-1-zhaoyang.huang@unisoc.com
Fixes: 67e139b02d99 ("mm/gup.c: refactor check_and_migrate_movable_pages()")
Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Aijun Sun <aijun.sun@unisoc.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm, swap: fix reclaim offset calculation error during allocation

There is a code error that will cause the swap entry allocator to reclaim
and check the whole cluster with an unexpected tail offset instead of the
part that needs to be reclaimed.  This may cause corruption of the swap
map, so fix it.

Link: https://lkml.kernel.org/r/20250130115131.37777-1-ryncsn@gmail.com
Fixes: 3b644773eefd ("mm, swap: reduce contention on device lock")
Signed-off-by: Kairui Song <kasong@tencent.com>
Cc: Chris Li <chrisl@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

.mailmap: update email address for Christopher Obbard

Update my email address.

Link: https://lkml.kernel.org/r/20250122-wip-obbardc-update-email-v2-1-12bde6b79ad0@linaro.org
Signed-off-by: Christopher Obbard <christopher.obbard@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kfence: skip __GFP_THISNODE allocations on NUMA systems

On NUMA systems, __GFP_THISNODE indicates that an allocation _must_ be on
a particular node, and failure to allocate on the desired node will result
in a failed allocation.

Skip __GFP_THISNODE allocations if we are running on a NUMA system, since
KFENCE can't guarantee which node its pool pages are allocated on.

Link: https://lkml.kernel.org/r/20250124120145.410066-1-elver@google.com
Fixes: 236e9f153852 ("kfence: skip all GFP_ZONEMASK allocations")
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Chistoph Lameter <cl@linux.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

nilfs2: fix possible int overflows in nilfs_fiemap()

Since nilfs_bmap_lookup_contig() in nilfs_fiemap() calculates its result
by being prepared to go through potentially maxblocks == INT_MAX blocks,
the value in n may experience an overflow caused by left shift of blkbits.

While it is extremely unlikely to occur, play it safe and cast right hand
expression to wider type to mitigate the issue.

Found by Linux Verification Center (linuxtesting.org) with static analysis
tool SVACE.

Link: https://lkml.kernel.org/r/20250124222133.5323-1-konishi.ryusuke@gmail.com
Fixes: 622daaff0a89 ("nilfs2: fiemap support")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: compaction: use the proper flag to determine watermarks

There are 4 NUMA nodes on my machine, and each NUMA node has 32GB of
memory.  I have configured 16GB of CMA memory on each NUMA node, and
starting a 32GB virtual machine with device passthrough is extremely slow,
taking almost an hour.

Long term GUP cannot allocate memory from CMA area, so a maximum of 16 GB
of no-CMA memory on a NUMA node can be used as virtual machine memory.
There is 16GB of free CMA memory on a NUMA node, which is sufficient to
pass the order-0 watermark check, causing the __compaction_suitable()
function to consistently return true.

For costly allocations, if the __compaction_suitable() function always
returns true, it causes the __alloc_pages_slowpath() function to fail to
exit at the appropriate point.  This prevents timely fallback to
allocating memory on other nodes, ultimately resulting in excessively long
virtual machine startup times.

Call trace:
__alloc_pages_slowpath
    if (compact_result == COMPACT_SKIPPED ||
        compact_result == COMPACT_DEFERRED)
        goto nopage; // should exit __alloc_pages_slowpath() from here

We could use the real unmovable allocation context to have
__zone_watermark_unusable_free() subtract CMA pages, and thus we won't
pass the order-0 check anymore once the non-CMA part is exhausted.  There
is some risk that in some different scenario the compaction could in fact
migrate pages from the exhausted non-CMA part of the zone to the CMA part
and succeed, and we'll skip it instead.  But only __GFP_NORETRY
allocations should be affected in the immediate "goto nopage" when
compaction is skipped, others will attempt with DEF_COMPACT_PRIORITY
anyway and won't fail without trying to compact-migrate the non-CMA
pageblocks into CMA pageblocks first, so it should be fine.

After this fix, it only takes a few tens of seconds to start a 32GB
virtual machine with device passthrough functionality.

Link: https://lore.kernel.org/lkml/1736335854-548-1-git-send-email-yangge1116@126.com/
Link: https://lkml.kernel.org/r/1737788037-8439-1-git-send-email-yangge1116@126.com
Signed-off-by: yangge <yangge1116@126.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kernel: be more careful about dup_mmap() failures and uprobe registering

If a memory allocation fails during dup_mmap(), the maple tree can be left
in an unsafe state for other iterators besides the exit path.  All the
locks are dropped before the exit_mmap() call (in mm/mmap.c), but the
incomplete mm_struct can be reached through (at least) the rmap finding
the vmas which have a pointer back to the mm_struct.

Up to this point, there have been no issues with being able to find an
mm_struct that was only partially initialised.  Syzbot was able to make
the incomplete mm_struct fail with recent forking changes, so it has been
proven unsafe to use the mm_struct that hasn't been initialised, as
referenced in the link below.

Although 8ac662f5da19f ("fork: avoid inappropriate uprobe access to
invalid mm") fixed the uprobe access, it does not completely remove the
race.

This patch sets the MMF_OOM_SKIP to avoid the iteration of the vmas on the
oom side (even though this is extremely unlikely to be selected as an oom
victim in the race window), and sets MMF_UNSTABLE to avoid other potential
users from using a partially initialised mm_struct.

When registering vmas for uprobe, skip the vmas in an mm that is marked
unstable.  Modifying a vma in an unstable mm may cause issues if the mm
isn't fully initialised.

Link: https://lore.kernel.org/all/6756d273.050a0220.2477f.003d.GAE@google.com/
Link: https://lkml.kernel.org/r/20250127170221.1761366-1-Liam.Howlett@oracle.com
Fixes: d24062914837 ("fork: use __mt_dup() to duplicate maple tree in dup_mmap()")
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/fake-numa: handle cases with no SRAT info

Handle more gracefully cases where no SRAT information is available, like
in VMs with no Numa support, and allow fake-numa configuration to complete
successfully in these cases

Link: https://lkml.kernel.org/r/20250127171623.1523171-1-bfaccini@nvidia.com
Fixes: 63db8170bf34 (“mm/fake-numa: allow later numa node hotplug”)
Signed-off-by: Bruno Faccini <bfaccini@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hyeonggon Yoo <hyeonggon.yoo@sk.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Len Brown <lenb@kernel.org>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: kmemleak: fix upper boundary check for physical address objects

Memblock allocations are registered by kmemleak separately, based on their
physical address.  During the scanning stage, it checks whether an object
is within the min_low_pfn and max_low_pfn boundaries and ignores it
otherwise.

With the recent addition of __percpu pointer leak detection (commit
6c99d4eb7c5e ("kmemleak: enable tracking for percpu pointers")), kmemleak
started reporting leaks in setup_zone_pageset() and
setup_per_cpu_pageset().  These were caused by the node_data[0] object
(initialised in alloc_node_data()) ending on the PFN_PHYS(max_low_pfn)
boundary.  The non-strict upper boundary check introduced by commit
84c326299191 ("mm: kmemleak: check physical address when scan") causes the
pg_data_t object to be ignored (not scanned) and the __percpu pointers it
contains to be reported as leaks.

Make the max_low_pfn upper boundary check strict when deciding whether to
ignore a physical address object and not scan it.

Link: https://lkml.kernel.org/r/20250127184233.2974311-1-catalin.marinas@arm.com
Fixes: 84c326299191 ("mm: kmemleak: check physical address when scan")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Cc: Patrick Wang <patrick.wang.shcn@gmail.com>
Cc: <stable@vger.kernel.org> [6.0.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mailmap: add an entry for Hamza Mahfooz

Map my previous work email to my current one.

Link: https://lkml.kernel.org/r/20250120205659.139027-1-hamzamahfooz@linux.microsoft.com
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Hans verkuil <hverkuil@xs4all.nl>
Cc: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

MAINTAINERS: mailmap: update Yosry Ahmed's email address

Moving to a linux.dev email address.

Link: https://lkml.kernel.org/r/20250123231344.817358-1-yosry.ahmed@linux.dev
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

scripts/gdb: fix aarch64 userspace detection in get_current_task

At least recent gdb releases (seen with 14.2) return SP_EL0 as signed long
which lets the right-shift always return 0.

Link: https://lkml.kernel.org/r/dcd2fabc-9131-4b48-8419-6444e2d67454@siemens.com
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/vmscan: accumulate nr_demoted for accurate demotion statistics

In shrink_folio_list(), demote_folio_list() can be called 2 times.
Currently stat->nr_demoted will only store the last nr_demoted( the later
nr_demoted is always zero, the former nr_demoted will get lost), as a
result number of demoted pages is not accurate.

Accumulate the nr_demoted count across multiple calls to
demote_folio_list(), ensuring accurate reporting of demotion statistics.

[lizhijian@fujitsu.com: introduce local nr_demoted to fix nr_reclaimed double counting]
Link: https://lkml.kernel.org/r/20250111015253.425693-1-lizhijian@fujitsu.com
Link: https://lkml.kernel.org/r/20250110122133.423481-1-lizhijian@fujitsu.com
Fixes: f77f0c751478 ("mm,memcg: provide per-cgroup counters for NUMA balancing operations")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Acked-by: Kaiyang Zhao <kaiyang2@cs.cmu.edu>
Tested-by: Donet Tom <donettom@linux.ibm.com>
Reviewed-by: Donet Tom <donettom@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

ocfs2: fix incorrect CPU endianness conversion causing mount failure

Commit 23aab037106d ("ocfs2: fix UBSAN warning in ocfs2_verify_volume()")
introduced a regression bug.  The blksz_bits value is already converted to
CPU endian in the previous code; therefore, the code shouldn't use
le32_to_cpu() anymore.

Link: https://lkml.kernel.org/r/20250121112204.12834-1-heming.zhao@suse.com
Fixes: 23aab037106d ("ocfs2: fix UBSAN warning in ocfs2_verify_volume()")
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/zsmalloc: add __maybe_unused attribute for is_first_zpdesc()

Commit c1b3bb73d55e ("mm/zsmalloc: use zpdesc in
trylock_zspage()/lock_zspage()") introduces is_first_zpdesc() function.
However, the function is only used when CONFIG_DEBUG_VM=y.

When building with LLVM=1 and W=1 option, the following warning is
generated:
  $ make -j12 W=1 LLVM=1 mm/zsmalloc.o
  mm/zsmalloc.c:455:20: error: function 'is_first_zpdesc' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
    455 | static inline bool is_first_zpdesc(struct zpdesc *zpdesc)
        |                    ^~~~~~~~~~~~~~~
  1 error generated.

Fix the warning by adding __maybe_unused attribute to the function.
No functional change intended.

Link: https://lkml.kernel.org/r/20250127231631.4363-1-42.hyeyoo@gmail.com
Fixes: c1b3bb73d55e ("mm/zsmalloc: use zpdesc in trylock_zspage()/lock_zspage()")
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501240958.4ILzuBrH-lkp@intel.com/
Cc: Alex Shi <alexs@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/vmscan: fix hard LOCKUP in function isolate_lru_folios

This fixes the following hard lockup in isolate_lru_folios() during memory
reclaim.  If the LRU mostly contains ineligible folios this may trigger
watchdog.

watchdog: Watchdog detected hard LOCKUP on cpu 173
RIP: 0010:native_queued_spin_lock_slowpath+0x255/0x2a0
Call Trace:
_raw_spin_lock_irqsave+0x31/0x40
folio_lruvec_lock_irqsave+0x5f/0x90
folio_batch_move_lru+0x91/0x150
lru_add_drain_per_cpu+0x1c/0x40
process_one_work+0x17d/0x350
worker_thread+0x27b/0x3a0
kthread+0xe8/0x120
ret_from_fork+0x34/0x50
ret_from_fork_asm+0x1b/0x30

lruvec->lru_lock owner：

PID: 2865     TASK: ffff888139214d40  CPU: 40   COMMAND: "kswapd0"
 #0 [fffffe0000945e60] crash_nmi_callback at ffffffffa567a555
 #1 [fffffe0000945e68] nmi_handle at ffffffffa563b171
 #2 [fffffe0000945eb0] default_do_nmi at ffffffffa6575920
 #3 [fffffe0000945ed0] exc_nmi at ffffffffa6575af4
 #4 [fffffe0000945ef0] end_repeat_nmi at ffffffffa6601dde
    [exception RIP: isolate_lru_folios+403]
    RIP: ffffffffa597df53  RSP: ffffc90006fb7c28  RFLAGS: 00000002
    RAX: 0000000000000001  RBX: ffffc90006fb7c60  RCX: ffffea04a2196f88
    RDX: ffffc90006fb7c60  RSI: ffffc90006fb7c60  RDI: ffffea04a2197048
    RBP: ffff88812cbd3010   R8: ffffea04a2197008   R9: 0000000000000001
    R10: 0000000000000000  R11: 0000000000000001  R12: ffffea04a2197008
    R13: ffffea04a2197048  R14: ffffc90006fb7de8  R15: 0000000003e3e937
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
    <NMI exception stack>
 #5 [ffffc90006fb7c28] isolate_lru_folios at ffffffffa597df53
 #6 [ffffc90006fb7cf8] shrink_active_list at ffffffffa597f788
 #7 [ffffc90006fb7da8] balance_pgdat at ffffffffa5986db0
 #8 [ffffc90006fb7ec0] kswapd at ffffffffa5987354
 #9 [ffffc90006fb7ef8] kthread at ffffffffa5748238
crash>

Scenario:
User processe are requesting a large amount of memory and keep page active.
Then a module continuously requests memory from ZONE_DMA32 area.
Memory reclaim will be triggered due to ZONE_DMA32 watermark alarm reached.
However pages in the LRU(active_anon) list are mostly from
the ZONE_NORMAL area.

Reproduce:
Terminal 1: Construct to continuously increase pages active(anon).
mkdir /tmp/memory
mount -t tmpfs -o size=1024000M tmpfs /tmp/memory
dd if=/dev/zero of=/tmp/memory/block bs=4M
tail /tmp/memory/block

Terminal 2:
vmstat -a 1
active will increase.
procs ---memory--- ---swap-- ---io---- -system-- ---cpu--- ...
 r  b   swpd   free  inact active   si   so    bi    bo
 1  0   0 1445623076 45898836 83646008    0    0     0
 1  0   0 1445623076 43450228 86094616    0    0     0
 1  0   0 1445623076 41003480 88541364    0    0     0
 1  0   0 1445623076 38557088 90987756    0    0     0
 1  0   0 1445623076 36109688 93435156    0    0     0
 1  0   0 1445619552 33663256 95881632    0    0     0
 1  0   0 1445619804 31217140 98327792    0    0     0
 1  0   0 1445619804 28769988 100774944    0    0     0
 1  0   0 1445619804 26322348 103222584    0    0     0
 1  0   0 1445619804 23875592 105669340    0    0     0

cat /proc/meminfo | head
Active(anon) increase.
MemTotal:       1579941036 kB
MemFree:        1445618500 kB
MemAvailable:   1453013224 kB
Buffers:            6516 kB
Cached:         128653956 kB
SwapCached:            0 kB
Active:         118110812 kB
Inactive:       11436620 kB
Active(anon):   115345744 kB
Inactive(anon):   945292 kB

When the Active(anon) is 115345744 kB, insmod module triggers
the ZONE_DMA32 watermark.

perf record -e vmscan:mm_vmscan_lru_isolate -aR
perf script
isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=2
nr_skipped=2 nr_taken=0 lru=active_anon
isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=0
nr_skipped=0 nr_taken=0 lru=active_anon
isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=28835844
nr_skipped=28835844 nr_taken=0 lru=active_anon
isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=28835844
nr_skipped=28835844 nr_taken=0 lru=active_anon
isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=29
nr_skipped=29 nr_taken=0 lru=active_anon
isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=0
nr_skipped=0 nr_taken=0 lru=active_anon

See nr_scanned=28835844.
28835844 * 4k = 115343376KB approximately equal to 115345744 kB.

If increase Active(anon) to 1000G then insmod module triggers
the ZONE_DMA32 watermark. hard lockup will occur.

In my device nr_scanned = 0000000003e3e937 when hard lockup.
Convert to memory size 0x0000000003e3e937 * 4KB = 261072092 KB.

   [ffffc90006fb7c28] isolate_lru_folios at ffffffffa597df53
    ffffc90006fb7c30: 0000000000000020 0000000000000000
    ffffc90006fb7c40: ffffc90006fb7d40 ffff88812cbd3000
    ffffc90006fb7c50: ffffc90006fb7d30 0000000106fb7de8
    ffffc90006fb7c60: ffffea04a2197008 ffffea0006ed4a48
    ffffc90006fb7c70: 0000000000000000 0000000000000000
    ffffc90006fb7c80: 0000000000000000 0000000000000000
    ffffc90006fb7c90: 0000000000000000 0000000000000000
    ffffc90006fb7ca0: 0000000000000000 0000000003e3e937
    ffffc90006fb7cb0: 0000000000000000 0000000000000000
    ffffc90006fb7cc0: 8d7c0b56b7874b00 ffff88812cbd3000

About the Fixes:
Why did it take eight years to be discovered?

The problem requires the following conditions to occur:
1. The device memory should be large enough.
2. Pages in the LRU(active_anon) list are mostly from the ZONE_NORMAL area.
3. The memory in ZONE_DMA32 needs to reach the watermark.

If the memory is not large enough, or if the usage design of ZONE_DMA32
area memory is reasonable, this problem is difficult to detect.

notes:
The problem is most likely to occur in ZONE_DMA32 and ZONE_NORMAL,
but other suitable scenarios may also trigger the problem.

Link: https://lkml.kernel.org/r/20241119060842.274072-1-liuye@kylinos.cn
Fixes: b2e18757f2c9 ("mm, vmscan: begin reclaiming pages on a per-node basis")
Signed-off-by: liuye <liuye@kylinos.cn>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Yang Shi <yang@os.amperecomputing.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

sh: boards: Use imply to enable hardware with complex dependencies

If CONFIG_I2C=n:

    WARNING: unmet direct dependencies detected for SND_SOC_AK4642
      Depends on [n]: SOUND [=y] && SND [=y] && SND_SOC [=y] && I2C [=n]
      Selected by [y]:
      - SH_7724_SOLUTION_ENGINE [=y] && CPU_SUBTYPE_SH7724 [=y] && SND_SIMPLE_CARD [=y]

    WARNING: unmet direct dependencies detected for SND_SOC_DA7210
      Depends on [n]: SOUND [=y] && SND [=y] && SND_SOC [=y] && SND_SOC_I2C_AND_SPI [=n]
      Selected by [y]:
      - SH_ECOVEC [=y] && CPU_SUBTYPE_SH7724 [=y] && SND_SIMPLE_CARD [=y]

Fix this by replacing select by imply, instead of adding a dependency on
I2C.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501240836.OvXqmANX-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

sh: Migrate to the generic rule for built-in DTB

Commit 654102df2ac2 ("kbuild: add generic support for built-in
boot DTBs") introduced generic support for built-in DTBs.

Select GENERIC_BUILTIN_DTB when built-in DTB support is enabled.

To keep consistency across architectures, this commit also renames
CONFIG_USE_BUILTIN_DTB to CONFIG_BUILTIN_DTB, and
CONFIG_BUILTIN_DTB_SOURCE to CONFIG_BUILTIN_DTB_NAME.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

sh: irq: Use seq_put_decimal_ull_width() for decimal values

On a system with n CPUs and m interrupts, there will be n*m decimal
values yielded via seq_printf(.."%10u "..) which has significant costs
parsing format string and is less efficient than seq_put_decimal_ull_width().
Stress reading /proc/interrupts indicates ~30% performance improvement with
this patch.

Signed-off-by: David Wang <00107082@163.com>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

Merge tag 'for-linus-hexagon-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/bcain/linux

Pull hexagon updates from Brian Cain:

 - Move kernel prototypes out of uapi header to internal header

 - Fix to address an unbalanced spinlock

 - Miscellaneous patches to fix static checks

 - Update bcain@quicinc.com->brian.cain@oss.qualcomm.com

* tag 'for-linus-hexagon-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/bcain/linux:
  MAINTAINERS: Update my email address
  hexagon: Fix unbalanced spinlock in die()
  hexagon: Fix warning comparing pointer to 0
  hexagon: Move kernel prototypes out of uapi/asm/setup.h header
  hexagon: time: Remove redundant null check for resource
  hexagon: fix using plain integer as NULL pointer warning in cmpxchg

Remove stale generated 'genheaders' file

This bogus stale file was added in commit 101971298be2 ("riscv: add a
warning when physical memory address overflows").  It's the old location
for what is now 'security/selinux/genheaders'.

It looks like it got incorrectly committed back when that file was in
the old location, and then rebasing kept the bogus file alive.

Reported-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/linux-riscv/20250201020003.GA77370@sol.localdomain/
Fixes: 101971298be2 ("riscv: add a warning when physical memory address overflows")
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'AT_EXECVE_CHECK-v6.14-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull AT_EXECVE_CHECK selftest fix from Kees Cook:
 "Fixes the AT_EXECVE_CHECK selftests which didn't run on old versions
  of glibc"

* tag 'AT_EXECVE_CHECK-v6.14-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  selftests: Handle old glibc without execveat(2)

Merge tag 'hardening-v6.14-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull hardening fixes from Kees Cook:
 "This is a fix for the soon to be released GCC 15 which has regressed
  its initialization of unions when performing explicit initialization
  (i.e. a general problem, not specifically a hardening problem; we're
  just carrying the fix).

  Details in the final patch, Acked by Masahiro, with updated selftests
  to validate the fix"

* tag 'hardening-v6.14-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  kbuild: Use -fzero-init-padding-bits=all
  stackinit: Add union initialization to selftests
  stackinit: Add old-style zero-init syntax to struct tests

Merge tag 'drm-next-2025-02-01' of https://gitlab.freedesktop.org/drm/kernel

Pull drm fixes from Dave Airlie:
 "This is only AMD fixes:

  amdgpu:
   - GC 12 fix
   - Aldebaran fix
   - DCN 3.5 fix
   - Freesync fix

  amdkfd:
   - Per queue reset fix
   - MES fix"

* tag 'drm-next-2025-02-01' of https://gitlab.freedesktop.org/drm/kernel:
  drm/amd/display: restore invalid MSA timing check for freesync
  drm/amdkfd: only flush the validate MES contex
  drm/amd/display: Correct register address in dcn35
  drm/amd/pm: Mark MM activity as unsupported
  drm/amd/amdgpu: change the config of cgcg on gfx12
  drm/amdkfd: Block per-queue reset when halt_if_hws_hang=1

Merge tag 'pci-v6.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci fix from Bjorn Helgaas:

 - Save the original INTX_DISABLE bit at the first pcim_intx() call and
   restore that at devres cleanup instead of restoring the opposite of
   the most recent enable/disable pcim_intx() argument, which was wrong
   when a driver called pcim_intx() multiple times or with the already
   enabled state (Takashi Iwai)

* tag 'pci-v6.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  PCI: Restore original INTX_DISABLE bit by pcim_intx()

Merge tag 'riscv-for-linus-6.14-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V updates from Palmer Dabbelt:

 - The PH1520 pinctrl and dwmac drivers are enabeled in defconfig

 - A redundant AQRL barrier has been removed from the futex cmpxchg
   implementation

 - Support for the T-Head vector extensions, which includes exposing
   these extensions to userspace on systems that implement them

 - Some more page table information is now printed on die() and systems
   that cause PA overflows

* tag 'riscv-for-linus-6.14-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: add a warning when physical memory address overflows
  riscv/mm/fault: add show_pte() before die()
  riscv: Add ghostwrite vulnerability
  selftests: riscv: Support xtheadvector in vector tests
  selftests: riscv: Fix vector tests
  riscv: hwprobe: Document thead vendor extensions and xtheadvector extension
  riscv: hwprobe: Add thead vendor extension probing
  riscv: vector: Support xtheadvector save/restore
  riscv: Add xtheadvector instruction definitions
  riscv: csr: Add CSR encodings for CSR_VXRM/CSR_VXSAT
  RISC-V: define the elements of the VCSR vector CSR
  riscv: vector: Use vlenb from DT for thead
  riscv: Add thead and xtheadvector as a vendor extension
  riscv: dts: allwinner: Add xtheadvector to the D1/D1s devicetree
  dt-bindings: cpus: add a thead vlen register length property
  dt-bindings: riscv: Add xtheadvector ISA extension description
  RISC-V: Mark riscv_v_init() as __init
  riscv: defconfig: drop RT_GROUP_SCHED=y
  riscv/futex: Optimize atomic cmpxchg
  riscv: defconfig: enable pinctrl and dwmac support for TH1520