The handling of the receive window size (rwind) from a received ACK packet
is not correct. The rxrpc_input_ackinfo() function currently checks the
current Tx window size against the rwind from the ACK to see if it has
changed, but then limits the rwind size before storing it in the tx_winsize
member and, if it increased, wake up the transmitting process. This means
that if rwind > RXRPC_RXTX_BUFF_SIZE - 1, this path will always be
followed.
Fix this by limiting rwind before we compare it to tx_winsize.
The effect of this can be seen by enabling the rxrpc_rx_rwind_change
tracepoint.
Fixes: 702f2ac87a9a ("rxrpc: Wake up the transmitter if Rx window size increases on the peer") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The FA2 mailbox is specified at 0x18025000 but should actually be
0x18025c00, length 0x400 according to socregs_nsp.h and board_bu.c. Also
the interrupt was off by one and should be GIC SPI 151 instead of 150.
kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object. Previous
commit "b8eb718348b8" fixed a similar problem.
CIFS implements the fallocate(FALLOC_FL_ZERO_RANGE) with send SMB
ioctl(FSCTL_SET_ZERO_DATA) to server. It just set the range of the
remote file to zero, but local page cache not update, then the data
inconsistent with server, which leads the xfstest generic/008 failed.
So we need to remove the local page caches before send SMB
ioctl(FSCTL_SET_ZERO_DATA) to server. After next read, it will
re-cache it.
Fixes: 30175628bf7f5 ("[SMB3] Enable fallocate -z support for SMB3 mounts") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Cc: stable@vger.kernel.org # v3.17 Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When punch hole success, we also can read old data from file:
# strace -e trace=pread64,fallocate xfs_io -f -c "pread 20 40" \
-c "fpunch 20 40" -c"pread 20 40" file
pread64(3, " version 5.8.0-rc1+"..., 40, 20) = 40
fallocate(3, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 20, 40) = 0
pread64(3, " version 5.8.0-rc1+"..., 40, 20) = 40
CIFS implements the fallocate(FALLOCATE_FL_PUNCH_HOLE) with send SMB
ioctl(FSCTL_SET_ZERO_DATA) to server. It just set the range of the
remote file to zero, but local page caches not updated, then the
local page caches inconsistent with server.
Also can be found by xfstests generic/316.
So, we need to remove the page caches before send the SMB
ioctl(FSCTL_SET_ZERO_DATA) to server.
Fixes: 31742c5a33176 ("enable fallocate punch hole ("fallocate -p") for SMB3") Suggested-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Cc: stable@vger.kernel.org # v3.17 Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
USB2 devices with LPM enabled may interrupt the system suspend:
[ 932.510475] usb 1-7: usb suspend, wakeup 0
[ 932.510549] hub 1-0:1.0: hub_suspend
[ 932.510581] usb usb1: bus suspend, wakeup 0
[ 932.510590] xhci_hcd 0000:00:14.0: port 9 not suspended
[ 932.510593] xhci_hcd 0000:00:14.0: port 8 not suspended
..
[ 932.520323] xhci_hcd 0000:00:14.0: Port change event, 1-7, id 7, portsc: 0x400e03
..
[ 932.591405] PM: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -16
[ 932.591414] PM: dpm_run_callback(): pci_pm_suspend+0x0/0x160 returns -16
[ 932.591418] PM: Device 0000:00:14.0 failed to suspend async: error -16
During system suspend, USB core will let HC suspends the device if it
doesn't have remote wakeup enabled and doesn't have any children.
However, from the log above we can see that the usb 1-7 doesn't get bus
suspended due to not in U0. After a while the port finished U2 -> U0
transition, interrupts the suspend process.
The observation is that after disabling LPM, port doesn't transit to U0
immediately and can linger in U2. xHCI spec 4.23.5.2 states that the
maximum exit latency for USB2 LPM should be BESL + 10us. The BESL for
the affected device is advertised as 400us, which is still not enough
based on my testing result.
So let's use the maximum permitted latency, 10000, to poll for U0
status to solve the issue.
The USB-audio mixer code holds a linked list of usb_mixer_elem_list,
and several operations are performed for each mixer element. A few of
them (snd_usb_mixer_notify_id() and snd_usb_mixer_interrupt_v2())
assume each mixer element being a usb_mixer_elem_info object that is a
subclass of usb_mixer_elem_list, cast via container_of() and access it
members. This may result in an out-of-bound access when a
non-standard list element has been added, as spotted by syzkaller
recently.
This patch adds a new field, is_std_info, in usb_mixer_elem_list to
indicate that the element is the usb_mixer_elem_info type or not, and
skip the access to such an element if needed.
Introduce a new macro for iterating over mixer element list for
avoiding the open codes in many places. Also the open-coded
container_of() and the forced cast to struct usb_mixer_elem_info are
replaced with another simple macro, too.
No functional changes but just readability improvement.
When an interrupt occurs, the value of at least one of the belonging
controls should have changed. To make sure they get re-read from device
on the next read, invalidate the cache. This was correctly implemented
for uac2 already, but missing for uac1.
When a filesystem is mounted on a loop device and on a loop ioctl
LOOP_SET_STATUS64, because of kill_bdev, buffer_head mappings are getting
destroyed.
kill_bdev
truncate_inode_pages
truncate_inode_pages_range
do_invalidatepage
block_invalidatepage
discard_buffer -->clear BH_Mapped flag
sb_bread
__bread_gfp
bh = __getblk_gfp
-->discard_buffer clear BH_Mapped flag
__bread_slow
submit_bh
submit_bh_wbc
BUG_ON(!buffer_mapped(bh)) --> hit this BUG_ON
Fixes: 5db470e229e2 ("loop: drop caches if offset or block_size are changed") Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB_DEVICE(0x0424, 0x274e) can send data before cdc_acm is ready,
causing garbage chars on the TTY causing stray input to the shell
and/or login prompt.
Unable to complete the enumeration of a USB TV Tuner device.
Per XHCI spec (4.6.5), the EP state field of the input context shall
be cleared for a set address command. In the special case of an FS
device that has "MaxPacketSize0 = 8", the Linux XHCI driver does
not do this before evaluating the context. With an XHCI controller
that checks the EP state field for parameter context error this
causes a problem in cases such as the device getting reset again
after enumeration.
When that field is cleared, the problem does not occur.
This was found and fixed by Sasi Kumar.
Cc: stable@vger.kernel.org Signed-off-by: Al Cooper <alcooperx@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200624135949.22611-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci spec 6.2.3 shows that the EP state field in the endpoint context data
structure consist of bits [2:0].
The old value included a bit from the next field which fortunately is a
RsvdZ region. So hopefully this hasn't caused too much harm
fix error "clock source 41 is not valid, cannot use"
[] New USB device found, idVendor=154e, idProduct=1002, bcdDevice= 1.00
[] New USB device strings: Mfr=1, Product=2, SerialNumber=0
[] Product: DCD-1500RE
[] Manufacturer: D & M Holdings Inc.
[]
[] clock source 41 is not valid, cannot use
[] usbcore: registered new interface driver snd-usb-audio
If the function platform_get_irq() failed, the negative value
returned will not be detected here. So fix error handling in
exynos_ehci_probe(). And when get irq failed, the function
platform_get_irq() logs an error message, so remove redundant
message here.
When runtime suspend was enabled, runtime suspend might happen
when xhci is removing hcd. This might cause kernel panic when hcd
has been freed but runtime pm suspend related handle need to
reference it.
A Synopsys USB2.0 core used in Huawei Kunpeng920 SoC has a bug which
might cause the host controller not issuing ping.
Bug description:
After indicating an Interrupt on Async Advance, the software uses the
doorbell mechanism to delete the Next Link queue head of the last
executed queue head. At this time, the host controller still references
the removed queue head(the queue head is NULL). NULL reference causes
the host controller to lose the USB device.
Solution:
After deleting the Next Link queue head, when has_synopsys_hc_bug set
to 1，the software can write one of the valid queue head addresses to
the ASYNCLISTADDR register to allow the host controller to get
the valid queue head. in order to solve that problem, this patch set
the flag for Huawei Kunpeng920
There are detailed instructions and solutions in this patch:
commit 2f7ac6c19997 ("USB: ehci: add workaround for Synopsys HC bug")
During dwc2 driver probe, after gadget registration to the udc class
driver, if exist any builtin function driver it immediately bound to
dwc2 and after init host side (dwc2_hcd_init()) stucked in host mode.
Patch postpone gadget registration after host side initialization done.
Fixes: 117777b2c3bb9 ("usb: dwc2: Move gadget probe function into platform code") Reported-by: kbuild test robot <lkp@intel.com> Tested-by: Marek Vasut <marex@denx.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Link: https://lore.kernel.org/r/f21cb38fecc72a230b86155d94c7e60c9cb66f58.1591690938.git.hminas@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the current code, ->ndo_start_xmit() can be executed recursively only
10 times because of stack memory.
But, in the case of the vxlan, 10 recursion limit value results in
a stack overflow.
In the current code, the nested interface is limited by 8 depth.
There is no critical reason that the recursion limitation value should
be 10.
So, it would be good to be the same value with the limitation value of
nesting interface depth.
Test commands:
ip link add vxlan10 type vxlan vni 10 dstport 4789 srcport 4789 4789
ip link set vxlan10 up
ip a a 192.168.10.1/24 dev vxlan10
ip n a 192.168.10.2 dev vxlan10 lladdr fc:22:33:44:55:66 nud permanent
for i in {9..0}
do
let A=$i+1
ip link add vxlan$i type vxlan vni $i dstport 4789 srcport 4789 4789
ip link set vxlan$i up
ip a a 192.168.$i.1/24 dev vxlan$i
ip n a 192.168.$i.2 dev vxlan$i lladdr fc:22:33:44:55:66 nud permanent
bridge fdb add fc:22:33:44:55:66 dev vxlan$A dst 192.168.$i.2 self
done
hping3 192.168.10.2 -2 -d 60000
Clearing the sock TX queue in sk_set_socket() might cause unexpected
out-of-order transmit when called from sock_orphan(), as outstanding
packets can pick a different TX queue and bypass the ones already queued.
This is undesired in general. More specifically, it breaks the in-order
scheduling property guarantee for device-offloaded TLS sockets.
Remove the call to sk_tx_queue_clear() in sk_set_socket(), and add it
explicitly only where needed.
Fixes: e022f0b4a03f ("net: Introduce sk_tx_queue_mapping") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The arp request address is error, this is because fib_table_lookup in
fib_check_nh lookup the destnation 9.9.9.9 nexthop, the scope of
the fib result is RT_SCOPE_LINK,the correct scope is RT_SCOPE_HOST.
Here I add a check of whether this is RT_TABLE_MAIN to solve this problem.
Fixes: 3bfd847203c6 ("net: Use passed in table for nexthop lookups") Signed-off-by: guodeqing <geffrey.guo@huawei.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the datapath, the ip6gre_tunnel_lookup() is used and it internally uses
fallback tunnel device pointer, which is fb_tunnel_dev.
This pointer variable should be set to NULL when a fb interface is deleted.
But there is no routine to set fb_tunnel_dev pointer to NULL.
So, this pointer will be still used after interface is deleted and
it eventually results in the use-after-free problem.
Test commands:
ip netns add A
ip netns add B
ip link add eth0 type veth peer name eth1
ip link set eth0 netns A
ip link set eth1 netns B
ip netns exec A ip link set lo up
ip netns exec A ip link set eth0 up
ip netns exec A ip link add ip6gre1 type ip6gre local fc:0::1 \
remote fc:0::2
ip netns exec A ip -6 a a fc:100::1/64 dev ip6gre1
ip netns exec A ip link set ip6gre1 up
ip netns exec A ip -6 a a fc:0::1/64 dev eth0
ip netns exec A ip link set ip6gre0 up
ip netns exec B ip link set lo up
ip netns exec B ip link set eth1 up
ip netns exec B ip link add ip6gre1 type ip6gre local fc:0::2 \
remote fc:0::1
ip netns exec B ip -6 a a fc:100::2/64 dev ip6gre1
ip netns exec B ip link set ip6gre1 up
ip netns exec B ip -6 a a fc:0::2/64 dev eth1
ip netns exec B ip link set ip6gre0 up
ip netns exec A ping fc:100::2 -s 60000 &
ip netns del B
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mirja Kuehlewind reported a bug in Linux TCP CUBIC Hystart, where
Hystart HYSTART_DELAY mechanism can exit Slow Start spuriously on an
ACK when the minimum rtt of a connection goes down. From inspection it
is clear from the existing code that this could happen in an example
like the following:
o The first 8 RTT samples in a round trip are 150ms, resulting in a
curr_rtt of 150ms and a delay_min of 150ms.
o The 9th RTT sample is 100ms. The curr_rtt does not change after the
first 8 samples, so curr_rtt remains 150ms. But delay_min can be
lowered at any time, so delay_min falls to 100ms. The code executes
the HYSTART_DELAY comparison between curr_rtt of 150ms and delay_min
of 100ms, and the curr_rtt is declared far enough above delay_min to
force a (spurious) exit of Slow start.
The fix here is simple: allow every RTT sample in a round trip to
lower the curr_rtt.
Fixes: ae27e98a5152 ("[TCP] CUBIC v2.3") Reported-by: Mirja Kuehlewind <mirja.kuehlewind@ericsson.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the datapath, the ip_tunnel_lookup() is used and it internally uses
fallback tunnel device pointer, which is fb_tunnel_dev.
This pointer variable should be set to NULL when a fb interface is deleted.
But there is no routine to set fb_tunnel_dev pointer to NULL.
So, this pointer will be still used after interface is deleted and
it eventually results in the use-after-free problem.
Test commands:
ip netns add A
ip netns add B
ip link add eth0 type veth peer name eth1
ip link set eth0 netns A
ip link set eth1 netns B
ip netns exec A ip link set lo up
ip netns exec A ip link set eth0 up
ip netns exec A ip link add gre1 type gre local 10.0.0.1 \
remote 10.0.0.2
ip netns exec A ip link set gre1 up
ip netns exec A ip a a 10.0.100.1/24 dev gre1
ip netns exec A ip a a 10.0.0.1/24 dev eth0
ip netns exec B ip link set lo up
ip netns exec B ip link set eth1 up
ip netns exec B ip link add gre1 type gre local 10.0.0.2 \
remote 10.0.0.1
ip netns exec B ip link set gre1 up
ip netns exec B ip a a 10.0.100.2/24 dev gre1
ip netns exec B ip a a 10.0.0.2/24 dev eth1
ip netns exec A hping3 10.0.100.2 -2 --flood -d 60000 &
ip netns del B
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver function tg3_io_error_detected() calls napi_disable twice,
without an intervening napi_enable, when the number of EEH errors exceeds
eeh_max_freezes, resulting in an indefinite sleep while holding rtnl_lock.
Add check for pcierr_recovery which skips code already executed for the
"Frozen" state.
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Back in 2013, we made a change that broke fast retransmit
for non SACK flows.
Indeed, for these flows, a sender needs to receive three duplicate
ACK before starting fast retransmit. Sending ACK with different
receive window do not count.
Even if enabling SACK is strongly recommended these days,
there still are some cases where it has to be disabled.
Not increasing the window seems better than having to
rely on RTO.
If a socket is set ipv6only, it will still send IPv4 addresses in the
INIT and INIT_ACK packets. This potentially misleads the peer into using
them, which then would cause association termination.
The fix is to not add IPv4 addresses to ipv6only sockets.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Tested-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When preallocated service calls are being discarded, they're passed to
->discard_new_call() to have the caller clean up any attached higher-layer
preallocated pieces before being marked completed. However, the act of
marking them completed now invokes the call's notification function - which
causes a problem because that function might assume that the previously
freed pieces of memory are still there.
Fix this by setting a dummy notification function on the socket after
calling ->discard_new_call().
This results in the following kasan message when the kafs module is
removed.
==================================================================
BUG: KASAN: use-after-free in afs_wake_up_async_call+0x6aa/0x770 fs/afs/rxrpc.c:707
Write of size 1 at addr ffff8880946c39e4 by task kworker/u4:1/21
In rocker_dma_rings_init, the goto blocks in case of errors
caused by the functions rocker_dma_cmd_ring_waits_alloc() and
rocker_dma_ring_create() are incorrect. The patch fixes the
order consistent with cleanup in rocker_dma_rings_fini().
Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Those last two bytes - 96 1f - aren't part of the original packet.
In the ax88179 RX path, the usbnet rx_fixup function trims a 2-byte
'alignment pseudo header' from the start of the packet, and sets the
length from a per-packet field populated by hardware. It looks like that
length field *includes* the 2-byte header; the current driver assumes
that it's excluded.
This change trims the 2-byte alignment header after we've set the packet
length, so the resulting packet length is correct. While we're moving
the comment around, this also fixes the spelling of 'pseudo'.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If call_netdevice_notifiers() failed, then rollback_registered()
calls netdev_unregister_kobject() which holds the kobject. The
reference cannot be put because the netdev won't be add to todo
list, so it will leads a memleak, we need put the reference to
avoid memleak.
Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The eth_addr member is passed to ether_addr functions that require
2-byte alignment, therefore the member must be properly aligned
to avoid unaligned accesses.
Fixes: 6db6f0eae605 ("bridge: multicast to unicast") Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Felix Fietkau <nbd@nbd.name> Cc: stable@vger.kernel.org Signed-off-by: Thomas Martitz <t.martitz@avm.de> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit a84d01647989 ("mld: fix memory leak in mld_del_delrec()") fixed
the memory leak of MLD, but missing the ipv6_mc_destroy_dev() path, in
which mca_sources are leaked after ma_put().
Using ip6_mc_clear_src() to take care of the missing free.
Fixes: 1666d49e1d41 ("mld: do not remove mld souce list info when set link down") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Acked-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The max MTU limit defined for ibmveth is not accounting for
virtual ethernet buffer overhead, which is twenty-two additional
bytes set aside for the ethernet header and eight additional bytes
of an opaque handle reserved for use by the hypervisor. Update the
max MTU to reflect this overhead.
Fixes: d894be57ca92 ("ethernet: use net core MTU range checking in more drivers") Fixes: 110447f8269a ("ethernet: fix min/max MTU typos") Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
begin_current_label_crit_section() must run in sleepable context because
when label_is_stale() is true, aa_replace_current_label() runs, which uses
prepare_creds(), which can sleep.
Until now, the ptraceme access check (which runs with tasklist_lock held)
violated this rule.
Fixes: b2d09ae449ced ("apparmor: move ptrace checks to using labels") Reported-by: Cyrill Gorcunov <gorcunov@gmail.com> Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since the quiesce/activate rework, __netdev_watchdog_up() is directly
called in the ucc_geth driver.
Unfortunately, this function is not available for modules and thus
ucc_geth cannot be built as a module anymore. Fix it by exporting
__netdev_watchdog_up().
Since the commit introducing the regression was backported to stable
branches, this one should ideally be as well.
Fixes: 79dde73cf9bc ("net/ethernet/freescale: rework quiesce/activate for ucc_geth") Signed-off-by: Valentin Longchamp <valentin@longchamp.me> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e7bf90e5afe3 ("block/bio-integrity: fix a memory leak bug") added
a kfree() for 'buf' if bio_integrity_add_page() returns '0'. However,
the object will be freed in bio_integrity_free() since 'bio->bi_opf' and
'bio->bi_integrity' were set previousy in bio_integrity_alloc().
Fixes: commit e7bf90e5afe3 ("block/bio-integrity: fix a memory leak bug") Signed-off-by: yu kuai <yukuai3@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Recent change in virtio_net_hdr_to_skb() broke some packetdrill tests.
When --mss=XXX option is set, packetdrill always provide gso_type & gso_size
for its inbound packets, regardless of packet size.
if (packet->tcp && packet->mss) {
if (packet->ipv4)
gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV4;
else
gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV6;
gso.gso_size = packet->mss;
}
Since many other programs could do the same, relax virtio_net_hdr_to_skb()
to no longer return an error, but instead ignore gso settings.
This keeps Willem intent to make sure no malicious packet could
reach gso stack.
Note that TCP stack has a special logic in tcp_set_skb_tso_segs()
to clear gso_size for small packets.
Fixes: 6dd912f82680 ("net: check untrusted gso_size at kernel entry") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set the mmio_value to '0' instead of simply clearing the present bit to
squash a benign warning in kvm_mmu_set_mmio_spte_mask() that complains
about the mmio_value overlapping the lower GFN mask on systems with 52
bits of PA space.
Opportunistically clean up the code and comments.
Cc: stable@vger.kernel.org Fixes: d43e2675e96fc ("KVM: x86: only do L1TF workaround on affected processors") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200527084909.23492-1-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Intel MKTME repurposes several high bits of physical address as 'keyID'
for memory encryption thus effectively reduces platform's maximum
physical address bits. Exactly how many bits are reduced is configured
by BIOS. To honor such HW behavior, the repurposed bits are reduced from
cpuinfo_x86->x86_phys_bits when MKTME is detected in CPU detection.
Similarly, AMD SME/SEV also reduces physical address bits for memory
encryption, and cpuinfo->x86_phys_bits is reduced too when SME/SEV is
detected, so for both MKTME and SME/SEV, boot_cpu_data.x86_phys_bits
doesn't hold physical address bits reported by CPUID anymore.
Currently KVM treats bits from boot_cpu_data.x86_phys_bits to 51 as
reserved bits, but it's not true anymore for MKTME, since MKTME treats
those reduced bits as 'keyID', but not reserved bits. Therefore
boot_cpu_data.x86_phys_bits cannot be used to calculate reserved bits
anymore, although we can still use it for AMD SME/SEV since SME/SEV
treats the reduced bits differently -- they are treated as reserved
bits, the same as other reserved bits in page table entity [1].
Fix by introducing a new 'shadow_phys_bits' variable in KVM x86 MMU code
to store the effective physical bits w/o reserved bits -- for MKTME,
it equals to physical address reported by CPUID, and for SME/SEV, it is
boot_cpu_data.x86_phys_bits.
Note that for the physical address bits reported to guest should remain
unchanged -- KVM should report physical address reported by CPUID to
guest, but not boot_cpu_data.x86_phys_bits. Because for Intel MKTME,
there's no harm if guest sets up 'keyID' bits in guest page table (since
MKTME only works at physical address level), and KVM doesn't even expose
MKTME to guest. Arguably, for AMD SME/SEV, guest is aware of SEV thus it
should adjust boot_cpu_data.x86_phys_bits when it detects SEV, therefore
KVM should still reports physcial address reported by CPUID to guest.
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Kai Huang <kai.huang@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
As a prerequisite to fix several SPTE reserved bits related calculation
errors caused by MKTME, which requires kvm_set_mmio_spte_mask() to use
local static variable defined in mmu.c.
Also move call site of kvm_set_mmio_spte_mask() from kvm_arch_init() to
kvm_mmu_module_init() so that kvm_set_mmio_spte_mask() can be static.
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Kai Huang <kai.huang@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Due to a bug introduced in Linux 3.14 we cannot determine the
correctly layout for a multi-zone RAID0 array - there are two
possibilities.
It is possible to tell the kernel which to chose using a module
parameter, but this can be clumsy to use. It would be best if
the choice were recorded in the metadata.
So add a feature flag for this purpose.
If it is set, then the 'layout' field of the superblock is used
to determine which layout to use.
If this flag is not set, then mddev->layout gets set to -1,
which causes the module parameter to be required.
Acked-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Sequence counters write paths are critical sections that must never be
preempted, and blocking, even for CONFIG_PREEMPTION=n, is not allowed.
Commit 5dbe7c178d3f ("net: fix kernel deadlock with interface rename and
netdev name retrieval.") handled a deadlock, observed with
CONFIG_PREEMPTION=n, where the devnet_rename seqcount read side was
infinitely spinning: it got scheduled after the seqcount write side
blocked inside its own critical section.
To fix that deadlock, among other issues, the commit added a
cond_resched() inside the read side section. While this will get the
non-preemptible kernel eventually unstuck, the seqcount reader is fully
exhausting its slice just spinning -- until TIF_NEED_RESCHED is set.
The fix is also still broken: if the seqcount reader belongs to a
real-time scheduling policy, it can spin forever and the kernel will
livelock.
Disabling preemption over the seqcount write side critical section will
not work: inside it are a number of GFP_KERNEL allocations and mutex
locking through the drivers/base/ :: device_rename() call chain.
>From all the above, replace the seqcount with a rwsem.
Fixes: 5dbe7c178d3f (net: fix kernel deadlock with interface rename and netdev name retrieval.) Fixes: 30e6c9fa93cf (net: devnet_rename_seq should be a seqcount) Fixes: c91f6df2db49 (sockopt: Change getsockopt() of SO_BINDTODEVICE to return an interface name) Cc: <stable@vger.kernel.org> Reported-by: kbuild test robot <lkp@intel.com> [ v1 missing up_read() on error exit ] Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [ v1 missing up_read() on error exit ] Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT.
Both PREEMPT and PREEMPT_RT require the same functionality which today
depends on CONFIG_PREEMPT.
Update the comment to use CONFIG_PREEMPTION.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David S. Miller <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20191015191821.11479-22-bigeasy@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
where _raw_spin_lock_irqsave triggers the kretprobe and installs
kretprobe_trampoline handler on _raw_spin_lock_irqsave return.
The kretprobe_trampoline handler is then executed with already
locked kretprobe_table_locks, and first thing it does is to
lock kretprobe_table_locks ;-) the whole lockup path like:
Currently the system will be woken up via WOL(Wake On LAN) even if the
device wakeup ability has been disabled via sysfs:
cat /sys/devices/pci0000:00/0000:00:1f.6/power/wakeup
disabled
The system should not be woken up if the user has explicitly
disabled the wake up ability for this device.
This patch clears the WOL ability of this network device if the
user has disabled the wake up ability in sysfs.
Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver") Reported-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a crypto template needs to be instantiated, CRYPTO_MSG_ALG_REQUEST
is sent to crypto_chain. cryptomgr_schedule_probe() handles this by
starting a thread to instantiate the template, then waiting for this
thread to complete via crypto_larval::completion.
This can deadlock because instantiating the template may require loading
modules, and this (apparently depending on userspace) may need to wait
for the crc-t10dif module (lib/crc-t10dif.c) to be loaded. But
crc-t10dif's module_init function uses crypto_register_notifier() and
therefore takes crypto_chain.rwsem for write. That can't proceed until
the notifier callback has finished, as it holds this semaphore for read.
Fix this by removing the wait on crypto_larval::completion from within
cryptomgr_schedule_probe(). It's actually unnecessary because
crypto_alg_mod_lookup() calls crypto_larval_wait() itself after sending
CRYPTO_MSG_ALG_REQUEST.
This only actually became a problem in v4.20 due to commit b76377543b73
("crc-t10dif: Pick better transform if one becomes available"), but the
unnecessary wait was much older.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207159 Reported-by: Mike Gerow <gerow@google.com> Fixes: 398710379f51 ("crypto: algapi - Move larval completion into algboss") Cc: <stable@vger.kernel.org> # v3.6+ Cc: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Reported-by: Kai Lüke <kai@kinvolk.io> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Somewhere along the line the cap on the SG list length for receive
was lost. This patch restores it and removes the subsequent test
which is now redundant.
Fixes: 2d97591ef43d ("crypto: af_alg - consolidation of...") Cc: <stable@vger.kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.
There is no real Fixes tag applying here as the use of nand_release()
in this driver predates by far the introduction of nand_cleanup() in
commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible. However, pointing this commit as the
culprit for backporting purposes makes sense even if this commit is not
introducing any bug.
nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.
There is no real Fixes tag applying here as the use of nand_release()
in this driver predates the introduction of nand_cleanup() in
commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible. However, pointing this commit as the
culprit for backporting purposes makes sense even if this commit is not
introducing any bug.
nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.
There is no real Fixes tag applying here as the use of nand_release()
in this driver predates by far the introduction of nand_cleanup() in
commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible, hence pointing it as the commit to
fix for backporting purposes, even if this commit is not introducing
any bug.
nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.
There is no real Fixes tag applying here as the use of nand_release()
in this driver predates by far the introduction of nand_cleanup() in
commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible. However, pointing this commit as the
culprit for backporting purposes makes sense even if this commit is not
introducing any bug.
Each iteration of for_each_child_of_node puts the previous node, but in
the case of a goto from the middle of the loop, there is no put, thus
causing a memory leak. Hence add an of_node_put under a new goto to put
the node at a loop exit.
Issue found with Coccinelle.
nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.
There is no real Fixes tag applying here as the use of nand_release()
in this driver predates by far the introduction of nand_cleanup() in
commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible. However, pointing this commit as the
culprit for backporting purposes makes sense even if this commit is not
introducing any bug.
nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.
There is no real Fixes tag applying here as the use of nand_release()
in this driver predates the introduction of nand_cleanup() in
commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible. However, pointing this commit as the
culprit for backporting purposes makes sense even if this commit is not
introducing any bug.
nand_release() is supposed be called after MTD device registration.
Here, only nand_scan() happened, so use nand_cleanup() instead.
There is no Fixes tag applying here as the use of nand_release()
in this driver predates by far the introduction of nand_cleanup() in
commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible. However, pointing this commit as the
culprit for backporting purposes makes sense.
Not sure nand_cleanup() is the right function to call here but in any
case it is not nand_release(). Indeed, even a comment says that
calling nand_release() is a bit of a hack as there is no MTD device to
unregister. So switch to nand_cleanup() for now and drop this
comment.
There is no Fixes tag applying here as the use of nand_release()
in this driver predates by far the introduction of nand_cleanup() in
commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources")
which makes this change possible. However, pointing this commit as the
culprit for backporting purposes makes sense even if it did not intruce
any bug.
For optimized block readers not holding a mutex, the "number of sectors"
64-bit value is protected from tearing on 32-bit architectures by a
sequence counter.
Disable preemption before entering that sequence counter's write side
critical section. Otherwise, the read side can preempt the write side
section and spin for the entire scheduler tick. If the reader belongs to
a real-time scheduling class, it can spin forever and the kernel will
livelock.
Fixes: c83f6bf98dc1 ("block: add partition resize function to blkpg ioctl") Cc: <stable@vger.kernel.org> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
The final build stage of the x86 kernel captures some symbol
addresses from the decompressor binary and copies them into zoffset.h.
It uses sed with a regular expression that matches the address, symbol
type and symbol name, and mangles the captured addresses and the names
of symbols of interest into #define directives that are added to
zoffset.h
The symbol type is indicated by a single letter, which we match
strictly: only letters in the set 'ABCDGRSTVW' are matched, even
though the actual symbol type is relevant and therefore ignored.
Commit bc7c9d620 ("efi/libstub/x86: Force 'hidden' visibility for
extern declarations") made a change to the way external symbol
references are classified, resulting in 'startup_32' now being
emitted as a hidden symbol. This prevents the use of GOT entries to
refer to this symbol via its absolute address, which recent toolchains
(including Clang based ones) already avoid by default, making this
change a no-op in the majority of cases.
However, as it turns out, the LLVM linker classifies such hidden
symbols as symbols with static linkage in fully linked ELF binaries,
causing tools such as NM to output a lowercase 't' rather than an upper
case 'T' for the type of such symbols. Since our sed expression only
matches upper case letters for the symbol type, the line describing
startup_32 is disregarded, resulting in a build error like the following
arch/x86/boot/header.S:568:18: error: symbol 'ZO_startup_32' can not be
undefined in a subtraction expression
init_size: .long (0x00000000008fd000 - ZO_startup_32 +
(((0x0000000001f6361c + ((0x0000000001f6361c >> 8) + 65536)
- 0x00000000008c32e5) + 4095) & ~4095)) # kernel initialization size
Given that we are only interested in the value of the symbol, let's match
any character in the set 'a-zA-Z' instead.
Currently we only poll for an ACT up to 30 times, with a busy-wait delay
of 100µs between each attempt - giving us a timeout of 2900µs. While
this might seem sensible, it would appear that in certain scenarios it
can take dramatically longer then that for us to receive an ACT. On one
of the EVGA MST hubs that I have available, I observed said hub
sometimes taking longer then a second before signalling the ACT. These
delays mostly seem to occur when previous sideband messages we've sent
are NAKd by the hub, however it wouldn't be particularly surprising if
it's possible to reproduce times like this simply by introducing branch
devices with large LCTs since payload allocations have to take effect on
every downstream device up to the payload's target.
So, instead of just retrying 30 times we poll for the ACT for up to 3ms,
and additionally use usleep_range() to avoid a very long and rude
busy-wait. Note that the previous retry count of 30 appears to have been
arbitrarily chosen, as I can't find any mention of a recommended timeout
or retry count for ACTs in the DisplayPort 2.0 specification. This also
goes for the range we were previously using for udelay(), although I
suspect that was just copied from the recommended delay for link
training on SST devices.
Changes since v1:
* Use readx_poll_timeout() instead of open-coding timeout loop - Sean
Paul
Changes since v2:
* Increase poll interval to 200us - Sean Paul
* Print status in hex when we timeout waiting for ACT - Sean Paul
Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)") Cc: Sean Paul <sean@poorly.run> Cc: <stable@vger.kernel.org> # v3.17+ Reviewed-by: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20200406221253.1307209-4-lyude@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix the bug when calculating the physical block number of the first
block in the split extent.
This bug will cause xfstests shared/298 failure on ext4 with bigalloc
enabled occasionally. Ext4 error messages indicate that previously freed
blocks are being freed again, and the following fsck will fail due to
the inconsistency of block bitmap and bg descriptor.
The following is an example case:
1. First, Initialize a ext4 filesystem with cluster size '16K', block size
'4K', in which case, one cluster contains four blocks.
2. Create one file (e.g., xxx.img) on this ext4 filesystem. Now the extent
tree of this file is like:
3. Then execute PUNCH_HOLE fallocate on this file. The hole range is
like:
..
ext4_ext_remove_space: dev 254,16 ino 12 since 49506 end 49506 depth 1
ext4_ext_remove_space: dev 254,16 ino 12 since 49544 end 49546 depth 1
ext4_ext_remove_space: dev 254,16 ino 12 since 49605 end 49607 depth 1
...
4. Then the extent tree of this file after punching is like
...
49507:[0]37:158047
49547:[0]58:158087
...
5. Detailed procedure of punching hole [49544, 49546]
5.3. The ftrace output when punching hole [49544, 49546]:
- ext4_ext_remove_space (start 49544, end 49546)
- ext4_ext_rm_leaf (start 49544, end 49546, last_extent [49507(158047), 40], partial [pclu 39522 lblk 0 state 2])
- ext4_remove_blocks (extent [49507(158047), 40], from 49544 to 49546, partial [pclu 39522 lblk 0 state 2]
- ext4_free_blocks: (block 158084 count 4)
- ext4_mballoc_free (extent 1/6753/1)
5.4. Ext4 error message in dmesg:
EXT4-fs error (device vdb): mb_free_blocks:1457: group 1, block 158084:freeing already freed block (bit 6753); block bitmap corrupt.
EXT4-fs error (device vdb): ext4_mb_generate_buddy:747: group 1, block bitmap and bg descriptor inconsistent: 19550 vs 19551 free clusters
In this case, the whole cluster 39521 is freed mistakenly when freeing
pblock 158084~158086 (i.e., the first three blocks of this cluster),
although pblock 158087 (the last remaining block of this cluster) has
not been freed yet.
The root cause of this isuue is that, the pclu of the partial cluster is
calculated mistakenly in ext4_ext_remove_space(). The correct
partial_cluster.pclu (i.e., the cluster number of the first block in the
next extent, that is, lblock 49597 (pblock 158086)) should be 39521 rather
than 39522.
Clang's static analysis tool reports these double free memory errors.
security/selinux/ss/services.c:2987:4: warning: Attempt to free released memory [unix.Malloc]
kfree(bnames[i]);
^~~~~~~~~~~~~~~~
security/selinux/ss/services.c:2990:2: warning: Attempt to free released memory [unix.Malloc]
kfree(bvalues);
^~~~~~~~~~~~~~
So improve the security_get_bools error handling by freeing these variables
and setting their return pointers to NULL and the return len to 0
Cc: stable@vger.kernel.org Signed-off-by: Tom Rix <trix@redhat.com> Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The command ring and cursor ring use different notify port addresses
definition: QXL_IO_NOTIFY_CMD and QXL_IO_NOTIFY_CURSOR. However, in
qxl_device_init() we use QXL_IO_NOTIFY_CMD to create both command ring
and cursor ring. This doesn't cause any problems now, because QEMU's
behaviors on QXL_IO_NOTIFY_CMD and QXL_IO_NOTIFY_CURSOR are the same.
However, QEMU's behavior may be change in future, so let's fix it.
P.S.: In the X.org QXL driver, the notify port address of cursor ring
is correct.
Just add a bit more line wrapping, get rid of some extraneous
whitespace, remove an unneeded goto label, and move around some variable
declarations. No functional changes here.
Signed-off-by: Lyude Paul <lyude@redhat.com>
[this isn't a fix, but it's needed for the fix that comes after this] Fixes: ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)") Cc: Sean Paul <sean@poorly.run> Cc: <stable@vger.kernel.org> # v3.17+ Reviewed-by: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20200406221253.1307209-3-lyude@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 130f4caf145c ("libata: Ensure ata_port probe has completed before
detach") may cause system freeze during suspend.
Using async_synchronize_full() in PM callbacks is wrong, since async
callbacks that are already scheduled may wait for not-yet-scheduled
callbacks, causes a circular dependency.
Instead of using big hammer like async_synchronize_full(), use async
cookie to make sure port probe are synced, without affecting other
scheduled PM callbacks.
Fixes: 130f4caf145c ("libata: Ensure ata_port probe has completed before detach") Suggested-by: John Garry <john.garry@huawei.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: John Garry <john.garry@huawei.com> BugLink: https://bugs.launchpad.net/bugs/1867983 Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Unprivileged memory accesses generated by the so-called "translated"
instructions (e.g. STTR) at EL1 can cause EL0 watchpoints to fire
unexpectedly if kernel debugging is enabled. In such cases, the
hw_breakpoint logic will invoke the user overflow handler which will
typically raise a SIGTRAP back to the current task. This is futile when
returning back to the kernel because (a) the signal won't have been
delivered and (b) userspace can't handle the thing anyway.
Avoid invoking the user overflow handler for watchpoints triggered by
kernel uaccess routines, and instead single-step over the faulting
instruction as we would if no overflow handler had been installed.
(Fixes tag identifies the introduction of unprivileged memory accesses,
which exposed this latent bug in the hw_breakpoint code)
Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Fixes: 57f4959bad0a ("arm64: kernel: Add support for User Access Override") Reported-by: Luis Machado <luis.machado@linaro.org> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In blkdev_get() we call __blkdev_get() to do some internal jobs and if
there is some errors in __blkdev_get(), the bdput() is called which
means we have released the refcount of the bdev (actually the refcount of
the bdev inode). This means we cannot access bdev after that point. But
acctually bdev is still accessed in blkdev_get() after calling
__blkdev_get(). This results in use-after-free if the refcount is the
last one we released in __blkdev_get(). Let's take a look at the
following scenerio:
CPU0 CPU1 CPU2
blkdev_open blkdev_open Remove disk
bd_acquire
blkdev_get
__blkdev_get del_gendisk
bdev_unhash_inode
bd_acquire bdev_get_gendisk
bd_forget failed because of unhashed
bdput
bdput (the last one)
bdev_evict_inode
Fix this by delaying bdput() to the end of blkdev_get() which means we
have finished accessing bdev.
Fixes: 77ea887e433a ("implement in-kernel gendisk events handling") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ming Lei <ming.lei@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
coccicheck reports:
drivers/md//bcache/btree.c:1538:1-7: preceding lock on line 1417
In btree_gc_coalesce func, if the coalescing process fails, we will goto
to out_nocoalesce tag directly without releasing new_nodes[i]->write_lock.
Then, it will cause a deadlock when trying to acquire new_nodes[i]->
write_lock for freeing new_nodes[i] before return.
btree_gc_coalesce func details as follows:
if alloc new_nodes[i] fails:
goto out_nocoalesce;
// obtain new_nodes[i]->write_lock
mutex_lock(&new_nodes[i]->write_lock)
// main coalescing process
for (i = nodes - 1; i > 0; --i)
[snipped]
if coalescing process fails:
// Here, directly goto out_nocoalesce
// tag will cause a deadlock
goto out_nocoalesce;
[snipped]
// release new_nodes[i]->write_lock
mutex_unlock(&new_nodes[i]->write_lock)
// coalesing succ, return
return;
out_nocoalesce:
btree_node_free(new_nodes[i]) // free new_nodes[i]
// obtain new_nodes[i]->write_lock
mutex_lock(&new_nodes[i]->write_lock);
// set flag for reuse
clear_bit(BTREE_NODE_dirty, &ew_nodes[i]->flags);
// release new_nodes[i]->write_lock
mutex_unlock(&new_nodes[i]->write_lock);
To fix the problem, we add a new tag 'out_unlock_nocoalesce' for
releasing new_nodes[i]->write_lock before out_nocoalesce tag. If
coalescing process fails, we will go to out_unlock_nocoalesce tag
for releasing new_nodes[i]->write_lock before free new_nodes[i] in
out_nocoalesce tag.
If user passed an interface option longer than 15 characters, then
device.ifr_name and hwtstamp.ifr_name became non-null-terminated
strings. The compiler warned about this:
Fixes: cb9eff097831 ("net: new user space API for time stamping of incoming and outgoing packets") Signed-off-by: Tanner Love <tannerlove@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Before this patch, transactions could be merged into the system
transaction by function gfs2_merge_trans(), but the transaction ail
lists were never merged. Because the ail flushing mechanism can run
separately, bd elements can be attached to the transaction's buffer
list during the transaction (trans_add_meta, etc) but quickly moved
to its ail lists. Later, in function gfs2_trans_end, the transaction
can be freed (by gfs2_trans_end) while it still has bd elements
queued to its ail lists, which can cause it to either lose track of
the bd elements altogether (memory leak) or worse, reference the bd
elements after the parent transaction has been freed.
Although I've not seen any serious consequences, the problem becomes
apparent with the previous patch's addition of:
This patch adds logic into gfs2_merge_trans() to move the merged
transaction's ail lists to the sdp transaction. This prevents the
use-after-free. To do this properly, we need to hold the ail lock,
so we pass sdp into the function instead of the transaction itself.
Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The function blk_log_remap() can be simplified by removing the
call to get_pdu_remap() that copies the values into extra variable to
print the data, which also fixes the endiannness warning reported by
sparse.
In blk_add_trace_spliti() blk_add_trace_bio_remap() use
blk_status_to_errno() to pass the error instead of pasing the bi_status.
This fixes the sparse warning.
ELFNOTE_START allows callers to specify flags for .pushsection assembler
directives. All callsites but ELF_NOTE use "a" for SHF_ALLOC. For vdso's
that explicitly use ELF_NOTE_START and BUILD_SALT, the same section is
specified twice after preprocessing, once with "a" flag, once without.
Example:
While GNU as allows this ordering, it warns for the opposite ordering,
making these directives position dependent. We'd prefer not to precisely
match this behavior in Clang's integrated assembler. Instead, the non
__ASSEMBLY__ definition of ELF_NOTE uses
__attribute__((section(".note.Linux"))) which is created with SHF_ALLOC,
so let's make the __ASSEMBLY__ definition of ELF_NOTE consistent with C
and just always use "a" flag.
This allows Clang to assemble a working mainline (5.6) kernel via:
$ make CC=clang AS=clang
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Fangrui Song <maskray@google.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Link: https://github.com/ClangBuiltLinux/linux/issues/913 Link: http://lkml.kernel.org/r/20200325231250.99205-1-ndesaulniers@google.com Debugged-by: Ilie Halip <ilie.halip@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Clang normally does not warn about certain issues in inline functions when
it only happens in an eliminated code path. However if something else
goes wrong, it does tend to complain about the definition of hweight_long()
on 32-bit targets:
The zlib inflate code has an old micro-optimization based on the
assumption that for pre-increment memory accesses, the compiler will
generate code that fits better into the processor's pipeline than what
would be generated for post-increment memory accesses.
This optimization was already removed in upstream zlib in 2016:
https://github.com/madler/zlib/commit/9aaec95e8211
This optimization causes UB according to C99, which says in section 6.5.6
"Additive operators": "If both the pointer operand and the result point to
elements of the same array object, or one past the last element of the
array object, the evaluation shall not produce an overflow; otherwise, the
behavior is undefined".
This UB is not only a theoretical concern, but can also cause trouble for
future work on compiler-based sanitizers.
According to the zlib commit, this optimization also is not optimal
anymore with modern compilers.
Replace uses of OFF, PUP and UP_UNALIGNED with their definitions in the
POSTINC case, and remove the macro definitions, just like in the upstream
patch.
If the geneve interface is in collect_md (external) mode, it can't send any
packets submitted directly to its net interface, as such packets won't have
metadata attached. This is expected.
However, the kernel itself sends some packets to the interface, most
notably, IPv6 DAD, IPv6 multicast listener reports, etc. This is not wrong,
as tunnel metadata can be specified in routing table (although technically,
that has never worked for IPv6, but hopefully will be fixed eventually) and
then the interface must correctly participate in IPv6 housekeeping.
The problem is that any such attempt increases the tx_error counter. Just
bringing up a geneve interface with IPv6 enabled is enough to see a number
of tx_errors. That causes confusion among users, prompting them to find
a network error where there is none.
Change the counter used to tx_dropped. That better conveys the meaning
(there's nothing wrong going on, just some packets are getting dropped) and
hopefully will make admins panic less.
Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The current implementation of the multiple accelerator core support for
OMAP SHA does not work properly. It always picks up the first probed
accelerator core if this is available, and rest of the book keeping also
gets confused if there are two cores available. Add proper load
balancing support for SHA, and also fix any bugs related to the
multicore support while doing it.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Urgent bkops level is used to compare against actual bkops status read from
UFS device. Urgent bkops level is set during initialization and might be
updated in exception event handler during runtime. But it should not be
updated to the actual bkops status every time when auto bkops is toggled.
Otherwise, if urgent bkops level is updated to 0, auto bkops shall always
be kept enabled.
Link: https://lore.kernel.org/r/1590632686-17866-1-git-send-email-cang@codeaurora.org Fixes: 24366c2afbb0 ("scsi: ufs: Recheck bkops level if bkops is disabled") Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
kobject_init_and_add() takes reference even when it fails. If this
function returns an error, kobject_put() must be called to properly
clean up the memory associated with the object.
Link: https://lore.kernel.org/r/20200528201353.14849-1-wu000273@umn.edu Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Before this patch, a simple typo accidentally added \n to the jid=
string for lock_nolock mounts. This made it impossible to mount a
gfs2 file system with a journal other than journal0. Thus:
mount -tgfs2 -o hostdata="jid=1" <device> <mount pt>
Resulted in:
mount: wrong fs type, bad option, bad superblock on <device>
In most cases this is not a problem. However, for debugging and
testing purposes we sometimes want to test the integrity of other
journals. This patch removes the unnecessary \n and thus allows
lock_nolock users to specify an alternate journal.
Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Working on the OpenRISC glibc port I found that sometimes clone was
working strange. That the tls data argument sent in r7 was always
wrong. Further investigation revealed that the arguments were getting
clobbered in the entry code. This patch removes the code that writes to
the argument registers. This was likely due to some old code hanging
around.
This patch fixes this up for clone and fork. This fork clobber is
harmless but also useless so remove.
kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object. Thus,
replace kfree() by kobject_put() to fix this issue. Previous
commit "b8eb718348b8" fixed a similar problem.
projects / users / dwmw2 / linux.git / log