Dave Airlie [Fri, 16 Feb 2024 01:19:14 +0000 (11:19 +1000)]
Merge tag 'drm-intel-gt-next-2024-02-15' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- Add GuC submission interface version query (Tvrtko Ursulin)
Driver Changes:
Fixes/improvements/new stuff:
- Atomically invalidate userptr on mmu-notifier (Jonathan Cavitt)
- Update handling of MMIO triggered reports (Umesh Nerlige Ramappa)
- Don't make assumptions about intel_wakeref_t type (Jani Nikula)
- Add workaround 14019877138 [xelpg] (Tejas Upadhyay)
- Allow for very slow HuC loading [huc] (John Harrison)
- Flush context destruction worker at suspend [guc] (Alan Previn)
- Close deregister-context race against CT-loss [guc] (Alan Previn)
- Avoid circular locking issue on busyness flush [guc] (John Harrison)
- Use rc6.supported flag from intel_gt for rc6_enable sysfs (Juan Escamilla)
- Reflect the true and current status of rc6_enable (Juan Escamilla)
- Wake GT before sending H2G message [mtl] (Vinay Belgaumkar)
- Restart the heartbeat timer when forcing a pulse (John Harrison)
Future platform enablement:
- Extend driver code of Xe_LPG to Xe_LPG+ [xelpg] (Harish Chegondi)
- Extend some workarounds/tuning to gfx version 12.74 [xelpg] (Matt Roper)
Miscellaneous:
- Reconcile Excess struct member kernel-doc warnings (Randy Dunlap)
- Change wa and EU_PERF_CNTL registers to MCR type [guc] (Shuicheng Lin)
- Add flex arrays to struct i915_syncmap (Erick Archer)
- Increasing the sleep time for live_rc6_manual [selftests] (Anirban Sk)
Dave Airlie [Thu, 15 Feb 2024 20:52:03 +0000 (06:52 +1000)]
Merge tag 'drm-intel-next-2024-02-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
drm/i915 feature pull for v6.9:
Features and functionality:
- Early transport for panel replay and PSR (Jouni)
- New ARL PCI IDs (Matt)
- DP TPS4 PHY test pattern support (Khaled)
Refactoring and cleanups:
- Unify and improve VSC SDP for PSR and non-PSR cases (Jouni)
- Refactor memory regions and improve debug logging (Ville)
- Rework global state serialization (Ville)
- Remove unused CDCLK divider fields (Gustavo)
- Unify HDCP connector logging format (Jani)
- Use display instead of graphics version in display code (Jani)
- Move VBT and opregion debugfs next to the implementation (Jani)
- Abstract opregion interface, use opaque type (Jani)
Fixes:
- Fix MTL stolen memory access (Ville)
- Fix initial display plane readout for MTL (Ville)
- Fix HPD handling during driver init/shutdown (Imre)
- Cursor vblank evasion fixes (Ville)
- Various VSC SDP fixes (Jouni)
- Allow PSR mode changes without full modeset (Jouni)
- Fix CDCLK sanitization on module load for Xe2_LPD (Gustavo)
- Fix the max DSC bpc supported by the source (Ankit)
- Add missing LNL ALPM AUX wake configuration (Jouni)
- Cx0 PHY state readout and verify fixes (Mika)
- Fix PSR (panel replay) debugfs for MST connectors (Imre)
- Fail HDCP repeater authentication if Type1 device not present (Suraj)
- Ratelimit debug logging in vm_fault_ttm (Nirmoy)
- Use a fake PCH for MTL because south display is not on the PCH (Haridhar)
- Disable DSB for Xe driver for now (José)
- Fix some LNL display register changes (Lucas)
- Fix build on ChromeOS (Paz Zcharya)
- Preserve current shared DPLL for fastsets on Type-C ports (Ville)
- Fix state checker warnings for MG/TC/TBT PLLs (Ville)
- Fix HDCP repeater ctl register value on errors (Jani)
- Allow FBC with CCS modifiers on SKL+ (Ville)
- Fix HDCP GGTT pinning (Ville)
DRM core changes:
- Add ratelimited drm dbg print (Nirmoy)
- DPCD PSR early transport macro (Jouni)
Merges:
- Backmerge drm-next to bring Xe driver to drm-intel-next (Jani)
John Harrison [Wed, 10 Jan 2024 21:02:16 +0000 (13:02 -0800)]
drm/i915/gt: Restart the heartbeat timer when forcing a pulse
The context persistence code does things like send super high priority
heartbeat pulses to ensure any leaked context can still be pre-empted
and thus isn't a total denial of service but only a minor denial of
service. Unfortunately, it wasn't bothering to restart the heartbeat
worker with a fresh timeout. Thus, if a persistent context happened to
be closed just before the heartbeat was going to go ping anyway then
the forced pulse would get a negligble execution time. And as the
forced pulse is super high priority, the worker thread's next step is
a reset. Which means a potentially innocent system randomly goes boom
when attempting to close a context. So, force a re-schedule of the
worker thread with the appropriate timeout.
Tvrtko Ursulin [Thu, 8 Feb 2024 08:25:10 +0000 (08:25 +0000)]
drm/i915: Add GuC submission interface version query
Add a new query to the GuC submission interface version.
Mesa intends to use this information to check for old firmware versions
with a known bug where using the render and compute command streamers
simultaneously can cause GPU hangs due issues in firmware scheduling.
Based on patches from Vivaik and Joonas.
Compile tested only.
v2:
* Added branch version.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Jose Souza <jose.souza@intel.com> Cc: Sagar Ghuge <sagar.ghuge@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Vivaik Balasubrawmanian <vivaik.balasubrawmanian@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Tested-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240208082510.1363268-1-tvrtko.ursulin@linux.intel.com
Dmitry Baryshkov [Wed, 14 Feb 2024 08:37:08 +0000 (10:37 +0200)]
drm: ci: use clk_ignore_unused for apq8016
If the ADV7511 bridge driver is compiled as a module, while DRM_MSM is
built-in, the clk_disable_unused congests with the runtime PM handling
of the DSI PHY for the clk_prepare_lock(). This causes apq8016 runner to
fail without completing any jobs ([1]). Drop the BM_CMDLINE which
duplicate the command line from the .baremetal-igt-arm64 clause and
enforce the clk_ignore_unused kernelarg instead to make apq8016 runner
work.
Randy Dunlap [Tue, 13 Feb 2024 06:17:33 +0000 (22:17 -0800)]
drm: drm_crtc: correct some comments
Fix some typos and punctuation.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240213061733.8068-1-rdunlap@infradead.org
If the firmware framebuffer has been reloacted, the sysfb code
fixes the screen_info state before it creates the framebuffer's
platform device. Efifb will automatically receive a screen_info
with updated values. Hence remove the tracking from efifb.
Thomas Zimmermann [Mon, 12 Feb 2024 09:06:15 +0000 (10:06 +0100)]
firmware/sysfb: Update screen_info for relocated EFI framebuffers
On ARM PCI systems, the PCI hierarchy might be reconfigured during
boot and the firmware framebuffer might move as a result of that.
The values in screen_info will then be invalid.
Work around this problem by tracking the framebuffer's initial
location before it get relocated; then fix the screen_info state
between reloaction and creating the firmware framebuffer's device.
This functionality has been lifted from efifb. See the commit message
of commit 55d728a40d36 ("efi/fb: Avoid reconfiguration of BAR that
covers the framebuffer") for more information.
Thomas Zimmermann [Mon, 12 Feb 2024 09:06:14 +0000 (10:06 +0100)]
fbdev/efifb: Do not track parent device status
There will be no EFI framebuffer device for disabled parent devices
and thus we never probe efifb in that case. Hence remove the tracking
code from efifb.
Thomas Zimmermann [Mon, 12 Feb 2024 09:06:13 +0000 (10:06 +0100)]
firmware/sysfb: Create firmware device only for enabled PCI devices
Test if the firmware framebuffer's parent PCI device, if any, has
been enabled. If not, the firmware framebuffer is most likely not
working. Hence, do not create a device for the firmware framebuffer
on disabled PCI devices.
So far, efifb tracked the status of the PCI parent device internally
and did not bind if it was disabled. This patch implements the
functionality for all PCI-based firmware framebuffers.
v3:
* make commit message more precise (Sui)
v2:
* rework sysfb_pci_dev_is_enabled() (Javier)
Thomas Zimmermann [Mon, 12 Feb 2024 09:06:12 +0000 (10:06 +0100)]
fbdev/efifb: Remove PM for parent device
The EFI device has the correct parent device set. This allows Linux
to handle the power management internally. Hence, remove the manual
PM management for the parent device from efifb.
Thomas Zimmermann [Mon, 12 Feb 2024 09:06:11 +0000 (10:06 +0100)]
firmware/sysfb: Set firmware-framebuffer parent device
Set the firmware framebuffer's parent device, which usually is the
graphics hardware's physical device. Integrates the framebuffer in
the Linux device hierarchy and lets Linux handle dependencies among
devices. For example, the graphics hardware won't be suspended while
the firmware device is still active.
v4:
* fix build for CONFIG_SYSFB_SIMPLEFB=n, again
v3:
* fix build for CONFIG_SYSFB_SIMPLEFB=n (Sui)
* test result of screen_info_pci_dev() for errors (Sui)
v2:
* detect parent device in sysfb_parent_dev()
Thomas Zimmermann [Mon, 12 Feb 2024 09:06:09 +0000 (10:06 +0100)]
video: Add helpers for decoding screen_info
The plain values as stored in struct screen_info need to be decoded
before being used. Add helpers that decode the type of video output
and the framebuffer I/O aperture.
Old or non-x86 systems may not set the type of video directly, but
only indicate the presence by storing 0x01 in orig_video_isVGA. The
decoding logic in screen_info_video_type() takes this into account.
It then follows similar code in vgacon's vgacon_startup() to detect
the video type from the given values.
A call to screen_info_resources() returns all known resources of the
given screen_info. The resources' values have been taken from existing
code in vgacon and vga16fb. These drivers can later be converted to
use the new interfaces.
Most Rockchip hdmi nodes are part of a power domain.
Add a power-domains property and include it to the example
with some reordering to align with the (new) documentation
about property ordering.
Johan Jonker [Wed, 31 Jan 2024 21:14:29 +0000 (22:14 +0100)]
dt-bindings: display: rockchip: rockchip,dw-hdmi: remove port property
The hdmi-connector nodes are now functional and the new way to model
hdmi ports nodes with both in and output port subnodes. Unfortunately
with the conversion to YAML the old method with only an input port node
was used. Later the new method was also added to the binding.
A binding must be unambiguously, so remove the old port property
entirely and make port@0 and port@1 a requirement as all
upstream dts files are updated as well and because checking
deprecated stuff is a bit pointless.
Update the example to avoid use of the removed property.
Chris Morgan [Mon, 12 Feb 2024 18:49:45 +0000 (12:49 -0600)]
drm/panel: st7703: Add Powkiddy RGB10MAX3 Panel Support
The Powkiddy RGB10MAX3 is a handheld device with a 5 inch 720x1280
display panel with a Sitronix ST7703 display controller. The panel
is installed rotated 270 degrees.
Ricardo B. Marliere [Tue, 13 Feb 2024 14:44:40 +0000 (11:44 -0300)]
gpu: host1x: bus: make host1x_bus_type const
Since commit d492cc2573a0 ("driver core: device.h: make struct
bus_type a const *"), the driver core can properly handle constant
struct bus_type, move the host1x_bus_type variable to be a constant
structure as well, placing it into read-only memory which can not be
modified at runtime.
Anirban Sk [Mon, 12 Feb 2024 05:07:38 +0000 (10:37 +0530)]
drm/i915/selftests: Increasing the sleep time for live_rc6_manual
Sometimes gt_pm live_rc6_manual selftest fails due to no power being
measured for the rc6 disabled period. Therefore increasing the rc6 disable
period from 250ms to 1000ms to rule out such sporadic failure.
v3:
- More descriptive and improved commit message (Anshuman)
Jani Nikula [Tue, 13 Feb 2024 08:49:54 +0000 (10:49 +0200)]
drm/xe: fix arguments to drm_err_printer()
The commit below changed drm_err_printer() arguments, but failed to
update all places.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/r/20240213120410.75c45763@canb.auug.org.au Fixes: 5e0c04c8c40b ("drm/print: make drm_err_printer() device specific by using drm_err()") Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240213084954.878643-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
UAPI:
- Bump KFD version so UMDs know that the fixes that enable the management of
VA mappings in compute VMs using the GEM_VA ioctl for DMABufs exported from KFD are present
- Add INFO query for input power. This matches the existing INFO query for average
power. Used in gaming HUDs, etc.
Example userspace: https://github.com/Umio-Yasuno/libdrm-amdgpu-sys-rs/tree/input_power
Erick Archer [Thu, 8 Feb 2024 18:13:18 +0000 (19:13 +0100)]
drm/i915: Add flex arrays to struct i915_syncmap
The "struct i915_syncmap" uses a dynamically sized set of trailing
elements. It can use an "u32" array or a "struct i915_syncmap *"
array.
So, use the preferred way in the kernel declaring flexible arrays [1].
Because there are two possibilities for the trailing arrays, it is
necessary to declare a union and use the DECLARE_FLEX_ARRAY macro.
The comment can be removed as the union is now clear enough.
Also, avoid the open-coded arithmetic in the memory allocator functions
[2] using the "struct_size" macro.
Moreover, refactor the "__sync_seqno" and "__sync_child" functions due
to now it is possible to use the union members added to the structure.
This way, it is also possible to avoid the open-coded arithmetic in
pointers.
Thomas Hellström [Mon, 12 Feb 2024 10:38:33 +0000 (11:38 +0100)]
drm/xe: Fix a missing argument to drm_err_printer
The indicated commit below added a device argument to the
function, but there was a call in the xe driver that was
not properly changed.
Fixes: 5e0c04c8c40b ("drm/print: make drm_err_printer() device specific by using drm_err()") Cc: Jani Nikula <jani.nikula@intel.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Maxime Ripard <mripard@kernel.org> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240212103833.138263-1-thomas.hellstrom@linux.intel.com
Michał Winiarski [Fri, 9 Feb 2024 14:08:18 +0000 (15:08 +0100)]
drm/tests: mm: Convert to drm_dbg_printer
Fix one of the tests in drm_mm that was not converted prior to
drm_debug_printer removal, causing tests build failure.
Fixes: e154c4fc7bf2 ("drm: remove drm_debug_printer in favor of drm_dbg_printer") Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240209140818.106685-1-michal.winiarski@intel.com
Erico Nunes [Wed, 24 Jan 2024 02:59:47 +0000 (03:59 +0100)]
drm/lima: standardize debug messages by ip name
Some debug messages carried the ip name, or included "lima", or
included both the ip name and then the numbered ip name again.
Make the messages more consistent by always looking up and showing
the ip name first.
Erico Nunes [Wed, 24 Jan 2024 02:59:46 +0000 (03:59 +0100)]
drm/lima: increase default job timeout to 10s
The previous 500ms default timeout was fairly optimistic and could be
hit by real world applications. Many distributions targeting devices
with a Mali-4xx already bumped this timeout to a higher limit.
We can be generous here with a high value as 10s since this should
mostly catch buggy jobs like infinite loop shaders, and these don't
seem to happen very often in real applications.
Marking the context as guilty currently only makes the application which
hits a single timeout problem to stop its rendering context entirely.
All jobs submitted later are dropped from the guilty context.
Lima runs on fairly underpowered hardware for modern standards and it is
not entirely unreasonable that a rendering job may time out occasionally
due to high system load or too demanding application stack. In this case
it would be generally preferred to report the error but try to keep the
application going.
Other similar embedded GPU drivers don't make use of the guilty context
flag. Now that there are reliability improvements to the lima timeout
recovery handling, drop the guilty contexts to let the application keep
running in this case.
Erico Nunes [Wed, 24 Jan 2024 02:59:44 +0000 (03:59 +0100)]
drm/lima: handle spurious timeouts due to high irq latency
There are several unexplained and unreproduced cases of rendering
timeouts with lima, for which one theory is high IRQ latency coming from
somewhere else in the system.
This kind of occurrence may cause applications to trigger unnecessary
resets of the GPU or even applications to hang if it hits an issue in
the recovery path.
Panfrost already does some special handling to account for such
"spurious timeouts", it makes sense to have this in lima too to reduce
the chance that it hit users.
Erico Nunes [Wed, 24 Jan 2024 02:59:43 +0000 (03:59 +0100)]
drm/lima: set gp bus_stop bit before hard reset
This is required for reliable hard resets. Otherwise, doing a hard reset
while a task is still running (such as a task which is being stopped by
the drm_sched timeout handler) may result in random mmu write timeouts
or lockups which cause the entire gpu to hang.
Erico Nunes [Wed, 24 Jan 2024 02:59:42 +0000 (03:59 +0100)]
drm/lima: set pp bus_stop bit before hard reset
This is required for reliable hard resets. Otherwise, doing a hard reset
while a task is still running (such as a task which is being stopped by
the drm_sched timeout handler) may result in random mmu write timeouts
or lockups which cause the entire gpu to hang.
Erico Nunes [Wed, 24 Jan 2024 02:59:41 +0000 (03:59 +0100)]
drm/lima: reset async_reset on gp hard reset
Lima gp jobs use an async reset to avoid having to wait for the soft
reset right after a job. The soft reset is done at the end of a job and
a reset_complete flag is expected to be set at the next job.
However, in case the user runs into a job timeout from any application,
a hard reset is issued to the hardware. This hard reset clears the
reset_complete flag, which causes an error message to show up before the
next job.
This is probably harmless for the execution but can be very confusing to
debug, as it blames a reset timeout on the next application to submit a
job.
Reset the async_reset flag when doing the hard reset so that we don't
get that message.
Erico Nunes [Wed, 24 Jan 2024 02:59:40 +0000 (03:59 +0100)]
drm/lima: reset async_reset on pp hard reset
Lima pp jobs use an async reset to avoid having to wait for the soft
reset right after a job. The soft reset is done at the end of a job and
a reset_complete flag is expected to be set at the next job.
However, in case the user runs into a job timeout from any application,
a hard reset is issued to the hardware. This hard reset clears the
reset_complete flag, which causes an error message to show up before the
next job.
This is probably harmless for the execution but can be very confusing to
debug, as it blames a reset timeout on the next application to submit a
job.
Reset the async_reset flag when doing the hard reset so that we don't
get that message.
Jani Nikula [Tue, 16 Jan 2024 13:07:35 +0000 (15:07 +0200)]
drm: remove drm_debug_printer in favor of drm_dbg_printer
Convert the remaining drm_debug_printer users over to drm_dbg_printer,
as it can handle the cases without struct drm_device pointer, and also
provides drm debug category and prefix support. Remove drm_debug_printer
altogether.
Jani Nikula [Tue, 16 Jan 2024 13:07:28 +0000 (15:07 +0200)]
drm/print: add drm_dbg_printer() for drm device specific printer
We've lacked a device specific debug printer. Add one. Take category
into account too.
__builtin_return_address(0) is inaccurate here, so don't use it. If
necessary, we can later pass __func__ to drm_dbg_printer() by wrapping
it inside a macro.
Jani Nikula [Tue, 23 Jan 2024 19:37:45 +0000 (21:37 +0200)]
drm/bridge: remove ->get_edid callback
There are no more users of the ->get_edid callback left. They've all
been converted to ->edid_read. Remove the callback, and the fallback in
drm_bridge_edid_read().
Srinivasan Shanmugam [Wed, 7 Feb 2024 04:50:57 +0000 (10:20 +0530)]
drm/amd/display: Implement bounds check for stream encoder creation in DCN301
'stream_enc_regs' array is an array of dcn10_stream_enc_registers
structures. The array is initialized with four elements, corresponding
to the four calls to stream_enc_regs() in the array initializer. This
means that valid indices for this array are 0, 1, 2, and 3.
The error message 'stream_enc_regs' 4 <= 5 below, is indicating that
there is an attempt to access this array with an index of 5, which is
out of bounds. This could lead to undefined behavior
Here, eng_id is used as an index to access the stream_enc_regs array. If
eng_id is 5, this would result in an out-of-bounds access on the
stream_enc_regs array.
Thus fixing Buffer overflow error in dcn301_stream_encoder_create
reported by Smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn301/dcn301_resource.c:1011 dcn301_stream_encoder_create() error: buffer overflow 'stream_enc_regs' 4 <= 5
Fixes: 3a83e4e64bb1 ("drm/amd/display: Add dcn3.01 support to DC (v2)") Cc: Roman Li <Roman.Li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nathan Chancellor [Mon, 5 Feb 2024 21:54:05 +0000 (14:54 -0700)]
drm/amd/display: Increase frame-larger-than for all display_mode_vba files
After a recent change in LLVM, allmodconfig (which has CONFIG_KCSAN=y
and CONFIG_WERROR=y enabled) has a few new instances of
-Wframe-larger-than for the mode support and system configuration
functions:
Without the sanitizers enabled, there are no warnings.
This was the catalyst for commit 6740ec97bcdb ("drm/amd/display:
Increase frame warning limit with KASAN or KCSAN in dml2") and that same
change was made to dml in commit 5b750b22530f ("drm/amd/display:
Increase frame warning limit with KASAN or KCSAN in dml") but the
frame_warn_flag variable was not applied to all files. Do so now to
clear up the warnings and make all these files consistent.
Aric Cyr [Mon, 29 Jan 2024 14:30:41 +0000 (09:30 -0500)]
drm/amd/display: 3.2.271
This version brings along the following:
- DCN35 fixes
- DMUB fixes
- Link training fixes
- Misc code style fixes
- MST fixes
- ODM fixes
- SubVP fixes
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rodrigo Siqueira [Wed, 24 Jan 2024 23:57:14 +0000 (16:57 -0700)]
drm/amd/display: Drop some unnecessary guards
Some of the CONFIG_DRM_AMD_DC_FP was added in some non-related FPU code,
which may cause confusion. This commit dropped some of the unnecessary
guards.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously we would call apply_ctx_to_hw to enable and disable
phantom pipes. However, apply_ctx_to_hw can potentially update
non-phantom pipes as well which is undesired. Instead of calling
apply_ctx_to_hw as a whole, call the relevant helpers for each
phantom pipe when enabling / disabling which will avoid us modifying
hardware state for non-phantom pipes unknowingly.
The use case is for an FRL display where FRL_Update is requested
by the display. In this case link_state_valid flag is cleared in
a passive callback thread and should be handled in the next stream /
link update. However, due to the call to apply_ctx_to_hw for the
phantom pipes during a flip, the main pipes were modified outside
of the desired sequence (driver does not handle link_state_valid = 0
on flips).
Cc: stable@vger.kernel.org # 6.6+ Reviewed-by: Samson Tam <samson.tam@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / users / jedix / linux-maple.git / log