Dave Airlie [Fri, 21 Feb 2025 00:50:28 +0000 (10:50 +1000)]
Merge tag 'drm-msm-fixes-2025-02-20' of https://gitlab.freedesktop.org/drm/msm into drm-fixes
Fixes for v6.14-rc4
Display:
* More catalog fixes:
- to skip watchdog programming through top block if its not present
- fix the setting of WB mask to ensure the WB input control is programmed
correctly through ping-pong
- drop lm_pair for sm6150 as that chipset does not have any 3dmerge block
* Fix the mode validation logic for DP/eDP to account for widebus (2ppc)
to allow high clock resolutions
* Fix to disable dither during encoder disable as otherwise this was
causing kms_writeback failure due to resource sharing between
* WB and DSI paths as DSI uses dither but WB does not
* Fixes for virtual planes, namely to drop extraneous return and fix
uninitialized variables
* Fix to avoid spill-over of DSC encoder block bits when programming
the bits-per-component
* Fixes in the DSI PHY to protect against concurrent access of
PHY_CMN_CLK_CFG regs between clock and display drivers
Core/GPU:
* Fix non-blocking fence wait incorrectly rounding up to 1 jiffy timeout
* Only print GMU fw version once, instead of each time the GPU resumes
Dave Airlie [Fri, 21 Feb 2025 00:44:53 +0000 (10:44 +1000)]
Merge tag 'drm-intel-fixes-2025-02-20' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Use spin_lock_irqsave() in interruptible context on guc submission (Krzysztof)
- Fixes on DDI and TRANS programming (Imre)
- Make sure all planes in use by the joiner have their crtc included (Ville)
- Fix 128b/132b modeset issues (Imre)
Dave Airlie [Thu, 20 Feb 2025 23:16:18 +0000 (09:16 +1000)]
Merge tag 'drm-misc-fixes-2025-02-20' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
An reset signal polarity fix for the jd9365da-h3 panel, a folio handling
fix and config fix in nouveau, a dmem cgroup descendant pool handling
fix, and a missing header for amdxdna.
Imre Deak [Mon, 17 Feb 2025 22:38:28 +0000 (00:38 +0200)]
drm/i915/dp: Fix disabling the transcoder function in 128b/132b mode
During disabling the transcoder in DP 128b/132b mode (both in case of an
MST master transcoder and in case of SST) the transcoder function must
be first disabled without changing any other field in the register (in
particular leaving the DDI port and mode select fields unchanged) and
clearing the DDI port and mode select fields separately, later during
the disabling sequences. Fix the sequence accordingly.
Bspec: 54128, 65448, 68849 Cc: Jani Nikula <jani.nikula@intel.com> Fixes: 79a6734cd56e ("drm/i915/ddi: disable trancoder port select for 128b/132b SST") Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250217223828.1166093-3-imre.deak@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 2ed653c7b843db0670136330480842d76cb65cd8) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Imre Deak [Mon, 17 Feb 2025 22:38:27 +0000 (00:38 +0200)]
drm/i915/dp: Fix error handling during 128b/132b link training
At the end of a 128b/132b link training sequence, the HW expects the
transcoder training pattern to be set to TPS2 and from that to normal
mode (disabling the training pattern). Transitioning from TPS1 directly
to normal mode leaves the transcoder in a stuck state, resulting in
page-flip timeouts later in the modeset sequence.
Atm, in case of a failure during link training, the transcoder may be
still set to output the TPS1 pattern. Later the transcoder is then set
from TPS1 directly to normal mode in intel_dp_stop_link_train(), leading
to modeset failures later as described above. Fix this by setting the
training patter to TPS2, if the link training failed at any point.
The clue in the specification about the above HW behavior is the
explicit mention that TPS2 must be set after the link training sequence
(and there isn't a similar requirement specified for the 8b/10b link
training), see the Bspec links below.
v2: Add bspec aspect/link to the commit log. (Jani)
Su Hui [Tue, 11 Feb 2025 01:53:55 +0000 (09:53 +0800)]
accel/amdxdna: Add missing include linux/slab.h
When compiling without CONFIG_IA32_EMULATION, there can be some errors:
drivers/accel/amdxdna/amdxdna_mailbox.c: In function ‘mailbox_release_msg’:
drivers/accel/amdxdna/amdxdna_mailbox.c:197:2: error: implicit declaration
of function ‘kfree’.
197 | kfree(mb_msg);
| ^~~~~
drivers/accel/amdxdna/amdxdna_mailbox.c: In function ‘xdna_mailbox_send_msg’:
drivers/accel/amdxdna/amdxdna_mailbox.c:418:11: error:implicit declaration
of function ‘kzalloc’.
418 | mb_msg = kzalloc(sizeof(*mb_msg) + pkg_size, GFP_KERNEL);
| ^~~~~~~
Karol Herbst [Sat, 15 Feb 2025 07:37:53 +0000 (08:37 +0100)]
MAINTAINERS: Remove myself
I was pondering with myself for a while if I should just make it official
that I'm not really involved in the kernel community anymore, neither as a
reviewer, nor as a maintainer.
Most of the time I simply excused myself with "if something urgent comes
up, I can chime in and help out". Lyude and Danilo are doing a wonderful
job and I've put all my trust into them.
However, there is one thing I can't stand and it's hurting me the most.
I'm convinced, no, my core believe is, that inclusivity and respect,
working with others as equals, no power plays involved, is how we should
work together within the Free and Open Source community.
I can understand maintainers needing to learn, being concerned on
technical points. Everybody deserves the time to understand and learn. It
is my true belief that most people are capable of change eventually. I
truly believe this community can change from within, however this doesn't
mean it's going to be a smooth process.
The moment I made up my mind about this was reading the following words
written by a maintainer within the kernel community:
"we are the thin blue line"
This isn't okay. This isn't creating an inclusive environment. This isn't
okay with the current political situation especially in the US. A
maintainer speaking those words can't be kept. No matter how important
or critical or relevant they are. They need to be removed until they
learn. Learn what those words mean for a lot of marginalized people. Learn
about what horrors it evokes in their minds.
I can't in good faith remain to be part of a project and its community
where those words are tolerated. Those words are not technical, they are
a political statement. Even if unintentionally, such words carry power,
they carry meanings one needs to be aware of. They do cause an immense
amount of harm.
I wish the best of luck for everybody to continue to try to work from
within. You got my full support and I won't hold it against anybody trying
to improve the community, it's a thankless job, it's a lot of work. People
will continue to burn out.
I got burned out enough by myself caring about the bits I maintained, but
eventually I had to realize my limits. The obligation I felt was eating me
from inside. It stopped being fun at some point and I reached a point
where I simply couldn't continue the work I was so motivated doing as I've
did in the early days.
Please respect my wishes and put this statement as is into the tree.
Leaving anything out destroys its entire meaning.
Aaron Kling [Tue, 18 Feb 2025 09:28:03 +0000 (03:28 -0600)]
drm/nouveau/pmu: Fix gp10b firmware guard
Most kernel configs enable multiple Tegra SoC generations, causing this
typo to go unnoticed. But in the case where a kernel config is strictly
for Tegra186, this is a problem.
The current implementation has a bug: If the current css doesn't
contain any pool that is a descendant of the "pool" (i.e. when
found_descendant == false), then "pool" will point to some unrelated
pool. If the current css has a child, we'll overwrite parent_pool with
this unrelated pool on the next iteration.
Since we can just check whether a pool refers to the same region to
determine whether or not it's related, all the additional pool tracking
is unnecessary, so just switch to using css_for_each_descendant_pre for
traversal.
Lucas De Marchi [Tue, 28 Jan 2025 15:42:42 +0000 (07:42 -0800)]
drm/xe/guc: Fix size_t print format
Use %zx format to print size_t to remove the following warning when
building for i386:
>> drivers/gpu/drm/xe/xe_guc_ct.c:1727:43: warning: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Wformat]
1727 | drm_printf(p, "[CTB].length: 0x%lx\n", snapshot->ctb_size);
| ~~~ ^~~~~~~~~~~~~~~~~~
| %zx
Cc: José Roberto de Souza <jose.souza@intel.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202501281627.H6nj184e-lkp@intel.com/ Fixes: 643f209ba3fd ("drm/xe: Make GUC binaries dump consistent with other binaries in devcoredump") Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250128154242.3371687-1-lucas.demarchi@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 7748289df510638ba61fed86b59ce7d2fb4a194c) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Ville Syrjälä [Wed, 12 Feb 2025 16:43:21 +0000 (18:43 +0200)]
drm/i915: Make sure all planes in use by the joiner have their crtc included
Any active plane needs to have its crtc included in the atomic
state. For planes enabled via uapi that is all handler in the core.
But when we use a plane for joiner the uapi code things the plane
is disabled and therefore doesn't have a crtc. So we need to pull
those in by hand. We do it first thing in
intel_joiner_add_affected_crtcs() so that any newly added crtc will
subsequently pull in all of its joined crtcs as well.
The symptoms from failing to do this are:
- duct tape in the form of commit 1d5b09f8daf8 ("drm/i915: Fix NULL
ptr deref by checking new_crtc_state")
- the plane's hw state will get overwritten by the disabled
uapi state if it can't find the uapi counterpart plane in
the atomic state from where it should copy the correct state
Imre Deak [Fri, 14 Feb 2025 14:19:51 +0000 (16:19 +0200)]
drm/i915/dsi: Use TRANS_DDI_FUNC_CTL's own port width macro
The format of the port width field in the DDI_BUF_CTL and the
TRANS_DDI_FUNC_CTL registers are different starting with MTL, where the
x3 lane mode for HDMI FRL has a different encoding in the two registers.
To account for this use the TRANS_DDI_FUNC_CTL's own port width macro.
Lucas De Marchi [Thu, 13 Feb 2025 19:28:59 +0000 (11:28 -0800)]
drm/xe: Fix error handling in xe_irq_install()
When devm_add_action_or_reset() fails, it already calls the function
passed as parameter and that function is already free'ing the irqs.
Drop the goto and just return.
The caller, xe_device_probe(), should also do the same thing instead of
wrongly doing `goto err` and calling the unrelated xe_display_fini()
function.
Krzysztof Karas [Thu, 16 Jan 2025 10:40:46 +0000 (10:40 +0000)]
drm/i915/gt: Use spin_lock_irqsave() in interruptible context
spin_lock/unlock() functions used in interrupt contexts could
result in a deadlock, as seen in GitLab issue #13399,
which occurs when interrupt comes in while holding a lock.
Try to remedy the problem by saving irq state before spin lock
acquisition.
v2: add irqs' state save/restore calls to all locks/unlocks in
signal_irq_work() execution (Maciej)
v3: use with spin_lock_irqsave() in guc_lrc_desc_unpin() instead
of other lock/unlock calls and add Fixes and Cc tags (Tvrtko);
change title and commit message
Fixes: 2f2cc53b5fe7 ("drm/i915/guc: Close deregister-context race against CT-loss") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13399 Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com> Cc: <stable@vger.kernel.org> # v6.9+ Reviewed-by: Maciej Patelczyk <maciej.patelczyk@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/pusppq5ybyszau2oocboj3mtj5x574gwij323jlclm5zxvimmu@mnfg6odxbpsv
(cherry picked from commit c088387ddd6482b40f21ccf23db1125e8fa4af7e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Linus Torvalds [Sun, 16 Feb 2025 20:58:51 +0000 (12:58 -0800)]
Merge tag 'kbuild-fixes-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix annoying logs when building tools in parallel
- Fix the Debian linux-headers package build again
- Fix the target triple detection for userspace programs on Clang
* tag 'kbuild-fixes-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: Fix a few typos in a comment
kbuild: userprogs: fix bitsize and target detection on clang
kbuild: fix linux-headers package build when $(CC) cannot link userspace
tools: fix annoying "mkdir -p ..." logs when building tools in parallel
Linus Torvalds [Sun, 16 Feb 2025 20:54:42 +0000 (12:54 -0800)]
Merge tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core api addition from Greg KH:
"Here is a driver core new api for 6.14-rc3 that is being added to
allow platform devices from stop being abused.
It adds a new 'faux_device' structure and bus and api to allow almost
a straight or simpler conversion from platform devices that were not
really a platform device. It also comes with a binding for rust, with
an example driver in rust showing how it's used.
I'm adding this now so that the patches that convert the different
drivers and subsystems can all start flowing into linux-next now
through their different development trees, in time for 6.15-rc1.
We have a number that are already reviewed and tested, but adding
those conversions now doesn't seem right. For now, no one is using
this, and it passes all build tests from 0-day and linux-next, so all
should be good"
* tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
rust/kernel: Add faux device bindings
driver core: add a faux bus for use when a simple device/bus is needed
Linus Torvalds [Sun, 16 Feb 2025 19:15:50 +0000 (11:15 -0800)]
Merge tag 'usb-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes, and new device ids, for
6.14-rc3. Lots of tiny stuff for reported problems, including:
- new device ids and quirks
- usb hub crash fix found by syzbot
- dwc2 driver fix
- dwc3 driver fixes
- uvc gadget driver fix
- cdc-acm driver fixes for a variety of different issues
- other tiny bugfixes
Almost all of these have been in linux-next this week, and all have
passed 0-day testing"
* tag 'usb-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
usb: typec: tcpm: PSSourceOffTimer timeout in PR_Swap enters ERROR_RECOVERY
usb: roles: set switch registered flag early on
usb: gadget: uvc: Fix unstarted kthread worker
USB: quirks: add USB_QUIRK_NO_LPM quirk for Teclast dist
usb: gadget: core: flush gadget workqueue after device removal
USB: gadget: f_midi: f_midi_complete to call queue_work
usb: core: fix pipe creation for get_bMaxPacketSize0
usb: dwc3: Fix timeout issue during controller enter/exit from halt state
USB: Add USB_QUIRK_NO_LPM quirk for sony xperia xz1 smartphone
USB: cdc-acm: Fill in Renesas R-Car D3 USB Download mode quirk
usb: cdc-acm: Fix handling of oversized fragments
usb: cdc-acm: Check control transfer buffer size before access
usb: xhci: Restore xhci_pci support for Renesas HCs
USB: pci-quirks: Fix HCCPARAMS register error for LS7A EHCI
USB: serial: option: drop MeiG Smart defines
USB: serial: option: fix Telit Cinterion FN990A name
USB: serial: option: add Telit Cinterion FN990B compositions
USB: serial: option: add MeiG Smart SLM828
usb: gadget: f_midi: fix MIDI Streaming descriptor lengths
usb: dwc2: gadget: remove of_node reference upon udc_stop
...
Linus Torvalds [Sun, 16 Feb 2025 18:41:50 +0000 (10:41 -0800)]
Merge tag 'perf_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fixes from Borislav Petkov:
- Explicitly clear DEBUGCTL.LBR to prevent LBRs continuing being
enabled after handoff to the OS
- Check CPUID(0x23) leaf and subleafs presence properly
- Remove the PEBS-via-PT feature from being supported on hybrid systems
- Fix perf record/top default commands on systems without a raw PMU
registered
* tag 'perf_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Ensure LBRs are disabled when a CPU is starting
perf/x86/intel: Fix ARCH_PERFMON_NUM_COUNTER_LEAF
perf/x86/intel: Clean up PEBS-via-PT on hybrid
perf/x86/rapl: Fix the error checking order
Linus Torvalds [Sun, 16 Feb 2025 18:25:12 +0000 (10:25 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Large set of fixes for vector handling, especially in the
interactions between host and guest state.
This fixes a number of bugs affecting actual deployments, and
greatly simplifies the FP/SIMD/SVE handling. Thanks to Mark Rutland
for dealing with this thankless task.
- Fix an ugly race between vcpu and vgic creation/init, resulting in
unexpected behaviours
- Fix use of kernel VAs at EL2 when emulating timers with nVHE
- Small set of pKVM improvements and cleanups
x86:
- Fix broken SNP support with KVM module built-in, ensuring the PSP
module is initialized before KVM even when the module
infrastructure cannot be used to order initcalls
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being
emulated by KVM to fix a NULL pointer dereference
- Enter guest mode (L2) from KVM's perspective before initializing
the vCPU's nested NPT MMU so that the MMU is properly tagged for
L2, not L1
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as
the guest's value may be stale if a VM-Exit is handled in the
fastpath"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
x86/sev: Fix broken SNP support with KVM module built-in
KVM: SVM: Ensure PSP module is initialized if KVM module is built-in
crypto: ccp: Add external API interface for PSP module initialization
KVM: arm64: vgic: Hoist SGI/PPI alloc from vgic_init() to kvm_create_vgic()
KVM: arm64: timer: Drop warning on failed interrupt signalling
KVM: arm64: Fix alignment of kvm_hyp_memcache allocations
KVM: arm64: Convert timer offset VA when accessed in HYP code
KVM: arm64: Simplify warning in kvm_arch_vcpu_load_fp()
KVM: arm64: Eagerly switch ZCR_EL{1,2}
KVM: arm64: Mark some header functions as inline
KVM: arm64: Refactor exit handlers
KVM: arm64: Refactor CPTR trap deactivation
KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN
KVM: arm64: Remove VHE host restore of CPACR_EL1.ZEN
KVM: arm64: Remove host FPSIMD saving for non-protected KVM
KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state
KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop
KVM: nSVM: Enter guest mode before initializing nested NPT MMU
KVM: selftests: Add CPUID tests for Hyper-V features that need in-kernel APIC
KVM: selftests: Manage CPUID array in Hyper-V CPUID test's core helper
...
Linus Torvalds [Sun, 16 Feb 2025 18:19:41 +0000 (10:19 -0800)]
Merge tag 'mips-fixes_6.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
"Fix for o32 ptrace/get_syscall_info"
* tag 'mips-fixes_6.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: fix mips_get_syscall_arg() for o32
MIPS: Export syscall stack arguments properly for remote use
Linus Torvalds [Sun, 16 Feb 2025 01:14:53 +0000 (17:14 -0800)]
Merge tag 'uml-for-linus-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML fixes from Richard Weinberger:
- Align signal stack correctly
- Convert to raw spinlocks where needed (irq and virtio)
- FPU related fixes
* tag 'uml-for-linus-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: convert irq_lock to raw spinlock
um: virtio_uml: use raw spinlock
um: virt-pci: don't use kmalloc()
um: fix execve stub execution on old host OSs
um: properly align signal stack on x86_64
um: avoid copying FP state from init_task
um: add back support for FXSAVE registers
Linus Torvalds [Sun, 16 Feb 2025 00:34:41 +0000 (16:34 -0800)]
Merge tag 'trace-ring-buffer-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull trace ring buffer fixes from Steven Rostedt:
- Enable resize on mmap() error
When a process mmaps a ring buffer, its size is locked and resizing
is disabled. But if the user passes in a wrong parameter, the mmap()
can fail after the resize was disabled and the mmap() exits with
error without reenabling the ring buffer resize. This prevents the
ring buffer from ever being resized after that. Reenable resizing of
the ring buffer on mmap() error.
- Have resizing return proper error and not always -ENOMEM
If the ring buffer is mmapped by one task and another task tries to
resize the buffer it will error with -ENOMEM. This is confusing to
the user as there may be plenty of memory available. Have it return
the error that actually happens (in this case -EBUSY) where the user
can understand why the resize failed.
- Test the sub-buffer array to validate persistent memory buffer
On boot up, the initialization of the persistent memory buffer will
do a validation check to see if the content of the data is valid, and
if so, it will use the memory as is, otherwise it re-initializes it.
There's meta data in this persistent memory that keeps track of which
sub-buffer is the reader page and an array that states the order of
the sub-buffers. The values in this array are indexes into the
sub-buffers. The validator checks to make sure that all the entries
in the array are within the sub-buffer list index, but it does not
check for duplications.
While working on this code, the array got corrupted and had
duplicates, where not all the sub-buffers were accounted for. This
passed the validator as all entries were valid, but the link list was
incorrect and could have caused a crash. The corruption only produced
incorrect data, but it could have been more severe. To fix this,
create a bitmask that covers all the sub-buffer indexes and set it to
all zeros. While iterating the array checking the values of the array
content, have it set a bit corresponding to the index in the array.
If the bit was already set, then it is a duplicate and mark the
buffer as invalid and reset it.
- Prevent mmap()ing persistent ring buffer
The persistent ring buffer uses vmap() to map the persistent memory.
Currently, the mmap() logic only uses virt_to_page() to get the page
from the ring buffer memory and use that to map to user space. This
works because a normal ring buffer uses alloc_page() to allocate its
memory. But because the persistent ring buffer use vmap() it causes a
kernel crash.
Fixing this to work with vmap() is not hard, but since mmap() on
persistent memory buffers never worked, just have the mmap() return
-ENODEV (what was returned before mmap() for persistent memory ring
buffers, as they never supported mmap. Normal buffers will still
allow mmap(). Implementing mmap() for persistent memory ring buffers
can wait till the next merge window.
- Fix polling on persistent ring buffers
There's a "buffer_percent" option (default set to 50), that is used
to have reads of the ring buffer binary data block until the buffer
fills to that percentage. The field "pages_touched" is incremented
every time a new sub-buffer has content added to it. This field is
used in the calculations to determine the amount of content is in the
buffer and if it exceeds the "buffer_percent" then it will wake the
task polling on the buffer.
As persistent ring buffers can be created by the content from a
previous boot, the "pages_touched" field was not updated. This means
that if a task were to poll on the persistent buffer, it would block
even if the buffer was completely full. It would block even if the
"buffer_percent" was zero, because with "pages_touched" as zero, it
would be calculated as the buffer having no content. Update
pages_touched when initializing the persistent ring buffer from a
previous boot.
* tag 'trace-ring-buffer-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Update pages_touched to reflect persistent buffer content
tracing: Do not allow mmap() of persistent ring buffer
ring-buffer: Validate the persistent meta data subbuf array
tracing: Have the error of __tracing_resize_ring_buffer() passed to user
ring-buffer: Unlock resize on mmap error
Krzysztof Kozlowski [Fri, 14 Feb 2025 15:08:43 +0000 (16:08 +0100)]
drm/msm/dsi/phy: Do not overwite PHY_CMN_CLK_CFG1 when choosing bitclk source
PHY_CMN_CLK_CFG1 register has four fields being used in the driver: DSI
clock divider, source of bitclk and two for enabling the DSI PHY PLL
clocks.
dsi_7nm_set_usecase() sets only the source of bitclk, so should leave
all other bits untouched. Use newly introduced
dsi_pll_cmn_clk_cfg1_update() to update respective bits without
overwriting the rest.
While shuffling the code, define and use PHY_CMN_CLK_CFG1 bitfields to
make the code more readable and obvious.
Fixes: 1ef7c99d145c ("drm/msm/dsi: add support for 7nm DSI PHY/PLL") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/637380/ Link: https://lore.kernel.org/r/20250214-drm-msm-phy-pll-cfg-reg-v3-3-0943b850722c@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Krzysztof Kozlowski [Fri, 14 Feb 2025 15:08:42 +0000 (16:08 +0100)]
drm/msm/dsi/phy: Protect PHY_CMN_CLK_CFG1 against clock driver
PHY_CMN_CLK_CFG1 register is updated by the PHY driver and by a mux
clock from Common Clock Framework:
devm_clk_hw_register_mux_parent_hws(). There could be a path leading to
concurrent and conflicting updates between PHY driver and clock
framework, e.g. changing the mux and enabling PLL clocks.
Add dedicated spinlock to be sure all PHY_CMN_CLK_CFG1 updates are
synchronized.
While shuffling the code, define and use PHY_CMN_CLK_CFG1 bitfields to
make the code more readable and obvious.
Fixes: 1ef7c99d145c ("drm/msm/dsi: add support for 7nm DSI PHY/PLL") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/637378/ Link: https://lore.kernel.org/r/20250214-drm-msm-phy-pll-cfg-reg-v3-2-0943b850722c@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Krzysztof Kozlowski [Fri, 14 Feb 2025 15:08:41 +0000 (16:08 +0100)]
drm/msm/dsi/phy: Protect PHY_CMN_CLK_CFG0 updated from driver side
PHY_CMN_CLK_CFG0 register is updated by the PHY driver and by two
divider clocks from Common Clock Framework:
devm_clk_hw_register_divider_parent_hw(). Concurrent access by the
clocks side is protected with spinlock, however driver's side in
restoring state is not. Restoring state is called from
msm_dsi_phy_enable(), so there could be a path leading to concurrent and
conflicting updates with clock framework.
Add missing lock usage on the PHY driver side, encapsulated in its own
function so the code will be still readable.
While shuffling the code, define and use PHY_CMN_CLK_CFG0 bitfields to
make the code more readable and obvious.
Fixes: 1ef7c99d145c ("drm/msm/dsi: add support for 7nm DSI PHY/PLL") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/637376/ Link: https://lore.kernel.org/r/20250214-drm-msm-phy-pll-cfg-reg-v3-1-0943b850722c@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Marijn Suijten [Mon, 10 Feb 2025 23:19:32 +0000 (00:19 +0100)]
drm/msm/dpu: Don't leak bits_per_component into random DSC_ENC fields
What used to be the input_10_bits boolean - feeding into the lowest
bit of DSC_ENC - on MSM downstream turned into an accidental OR with
the full bits_per_component number when it was ported to the upstream
kernel.
On typical bpc=8 setups we don't notice this because line_buf_depth is
always an odd value (it contains bpc+1) and will also set the 4th bit
after left-shifting by 3 (hence this |= bits_per_component is a no-op).
Now that guards are being removed to allow more bits_per_component
values besides 8 (possible since commit 49fd30a7153b ("drm/msm/dsi: use
DRM DSC helpers for DSC setup")), a bpc of 10 will instead clash with
the 5th bit which is convert_rgb. This is "fortunately" also always set
to true by MSM's dsi_populate_dsc_params() already, but once a bpc of 12
starts being used it'll write into simple_422 which is normally false.
To solve all these overlaps, simply replicate downstream code and only
set this lowest bit if bits_per_component is equal to 10. It is unclear
why DSC requires this only for bpc=10 but not bpc=12, and also notice
that this lowest bit wasn't set previously despite having a panel and
patch on the list using it without any mentioned issues.
Jessica Zhang [Wed, 12 Feb 2025 03:59:19 +0000 (19:59 -0800)]
drm/msm/dpu: Disable dither in phys encoder cleanup
Disable pingpong dither in dpu_encoder_helper_phys_cleanup().
This avoids the issue where an encoder unknowingly uses dither after
reserving a pingpong block that was previously bound to an encoder that
had enabled dither.
Abhinav Kumar [Thu, 6 Feb 2025 19:46:36 +0000 (11:46 -0800)]
drm/msm/dp: account for widebus and yuv420 during mode validation
Widebus allows the DP controller to operate in 2 pixel per clock mode.
The mode validation logic validates the mode->clock against the max
DP pixel clock. However the max DP pixel clock limit assumes widebus
is already enabled. Adjust the mode validation logic to only compare
the adjusted pixel clock which accounts for widebus against the max DP
pixel clock. Also fix the mode validation logic for YUV420 modes as in
that case as well, only half the pixel clock is needed.
Cc: stable@vger.kernel.org Fixes: 757a2f36ab09 ("drm/msm/dp: enable widebus feature for display port") Fixes: 6db6e5606576 ("drm/msm/dp: change clock related programming for YUV420 over DP") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dale Whinham <daleyo@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/635789/ Link: https://lore.kernel.org/r/20250206-dp-widebus-fix-v2-1-cb89a0313286@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Dmitry Baryshkov [Tue, 17 Dec 2024 12:35:40 +0000 (14:35 +0200)]
drm/msm/dpu: correct LM pairing for SM6150
The SM6150 platform doesn't have 3DMux (MERGE_3D) block, so it can not
split the screen between two LMs. Drop lm_pair fields as they don't make
sense for this platform.
Dmitry Baryshkov [Fri, 13 Dec 2024 22:14:18 +0000 (00:14 +0200)]
drm/msm/dpu: enable DPU_WB_INPUT_CTRL for DPU 5.x
Several DPU 5.x platforms are supposed to be using DPU_WB_INPUT_CTRL,
to bind WB and PINGPONG blocks, but they do not. Change those platforms
to use WB_SM8250_MASK, which includes that bit.
Dmitry Baryshkov [Fri, 13 Dec 2024 22:14:17 +0000 (00:14 +0200)]
drm/msm/dpu: skip watchdog timer programming through TOP on >= SM8450
The SM8450 and later chips have DPU_MDP_PERIPH_0_REMOVED feature bit
set, which means that those platforms have dropped some of the
registers, including the WD TIMER-related ones. Stop providing the
callback to program WD timer on those platforms.
Steven Rostedt [Fri, 14 Feb 2025 17:35:12 +0000 (12:35 -0500)]
ring-buffer: Update pages_touched to reflect persistent buffer content
The pages_touched field represents the number of subbuffers in the ring
buffer that have content that can be read. This is used in accounting of
"dirty_pages" and "buffer_percent" to allow the user to wait for the
buffer to be filled to a certain amount before it reads the buffer in
blocking mode.
The persistent buffer never updated this value so it was set to zero, and
this accounting would take it as it had no content. This would cause user
space to wait for content even though there's enough content in the ring
buffer that satisfies the buffer_percent.
Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Vincent Donnefort <vdonnefort@google.com> Link: https://lore.kernel.org/20250214123512.0631436e@gandalf.local.home Fixes: 5f3b6e839f3ce ("ring-buffer: Validate boot range memory events") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
But virt_to_page() does not work with vmap()'d memory which is what the
persistent ring buffer has. It is rather trivial to allow this, but for
now just disable mmap() of instances that have their ring buffer from the
reserve_mem option.
If an mmap() is performed on a persistent buffer it will return -ENODEV
just like it would if the .mmap field wasn't defined in the
file_operations structure.
Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Vincent Donnefort <vdonnefort@google.com> Link: https://lore.kernel.org/20250214115547.0d7287d3@gandalf.local.home Fixes: 9b7bdf6f6ece6 ("tracing: Have trace_printk not use binary prints if boot buffer") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Linus Torvalds [Sat, 15 Feb 2025 18:20:47 +0000 (10:20 -0800)]
Merge tag 'i2c-for-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"MAINTAINERS maintenance.
Changed email, added entry, deleted entry falling back to a generic
one"
* tag 'i2c-for-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Add maintainer for Qualcomm's I2C GENI driver
MAINTAINERS: delete entry for AXXIA I2C
MAINTAINERS: Use my kernel.org address for I2C ACPI work
Linus Torvalds [Sat, 15 Feb 2025 18:15:24 +0000 (10:15 -0800)]
Merge tag 's390-6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix isolated VFs handling by verifying that a VF’s parent PF is
locally owned before registering it in an existing PCI domain
- Disable arch_test_bit() optimization for PROFILE_ALL_BRANCHES to
workaround gcc failure in handling __builtin_constant_p() in this
case
- Fix CHPID "configure" attribute caching in CIO by not updating the
cache when SCLP returns no data, ensuring consistent sysfs output
- Remove CONFIG_LSM from default configs and rely on defaults, which
enables BPF LSM hook
* tag 's390-6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pci: Fix handling of isolated VFs
s390/pci: Pull search for parent PF out of zpci_iov_setup_virtfn()
s390/bitops: Disable arch_test_bit() optimization for PROFILE_ALL_BRANCHES
s390/cio: Fix CHPID "configure" attribute caching
s390/configs: Remove CONFIG_LSM
Thomas Weißschuh [Thu, 13 Feb 2025 14:55:17 +0000 (15:55 +0100)]
kbuild: userprogs: fix bitsize and target detection on clang
scripts/Makefile.clang was changed in the linked commit to move --target from
KBUILD_CFLAGS to KBUILD_CPPFLAGS, as that generally has a broader scope.
However that variable is not inspected by the userprogs logic,
breaking cross compilation on clang.
Use both variables to detect bitsize and target arguments for userprogs.
Linus Torvalds [Sat, 15 Feb 2025 17:54:46 +0000 (09:54 -0800)]
Merge tag 'rust-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
- Fix objtool warning due to future Rust 1.85.0 (to be released in a
few days)
- Clean future Rust 1.86.0 (to be released 2025-04-03) Clippy warning
* tag 'rust-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: rbtree: fix overindented list item
objtool/rust: add one more `noreturn` Rust function
which causes problems on 32-bit x86 configurations that have 64-bit
resource sizes:
x86_64-linux-ld: drivers/dma/tegra210-adma.o: in function `tegra_adma_probe':
tegra210-adma.c:(.text+0x1322): undefined reference to `__udivdi3'
because gcc doesn't generate the trivial code for a 64-by-32 divide,
turning it into a function call to do a full 64-by-64 divide. And the
kernel intentionally doesn't provide that helper function, because 99%
of the time all you want is the narrower version.
Of course, tegra210 is a 64-bit architecture and the 32-bit x86 build is
purely for build testing, so this really is just about build coverage
failure.
But build coverage is good.
Side note: div_u64() would be suboptimal if you actually have a 32-bit
resource_t, so our "helper" for divides are admittedly making it harder
than it should be to generate good code for all the possible cases.
At some point, I'll consider 32-bit x86 so entirely legacy that I can't
find it in myself to care any more, and we'll just add the __udivdi3
library function.
But for now, the right thing to do is to use "div_u64()" to show that
you know that you are doing the simpler divide with a 32-bit number.
And the build error enforces that.
While fixing the build issue, also check for division-by-zero, and for
overflow. Which hopefully cannot happen on real production hardware,
but the value of 'ch_base_offset' can definitely be zero in other
places.
Rob Clark [Mon, 13 Jan 2025 15:48:41 +0000 (07:48 -0800)]
drm/msm: Avoid rounding up to one jiffy
If userspace is trying to achieve a timeout of zero, let 'em have it.
Only round up if the timeout is greater than zero.
Fixes: 4969bccd5f4e ("drm/msm: Avoid rounding down to zero jiffies") Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/632264/
Konrad Dybcio [Thu, 13 Feb 2025 16:44:43 +0000 (17:44 +0100)]
drm/msm/a6xx: Only print the GMU firmware version once
We only fetch it once from userland, so let's also only notify the
user once and not on every runtime resume.
As you can notice by the tags chain, more than one user found this
annoying.
Reported-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz> Suggested-by: Abel Vesa <abel.vesa@linaro.org> Suggested-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/637062/ Signed-off-by: Rob Clark <robdclark@chromium.org>
Linus Torvalds [Sat, 15 Feb 2025 16:13:45 +0000 (08:13 -0800)]
Merge tag 'gpio-fixes-for-v6.14-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix interrupt handling issues in gpio-bcm-kona
- add an ACPI quirk for Acer Nitro ANV14 fixing an issue with spurious
wake up events
- add missing return value checks to gpio-stmpe
- fix a crash in error path in gpiochip_get_ngpios()
* tag 'gpio-fixes-for-v6.14-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: Fix crash on error in gpiochip_get_ngpios()
gpio: stmpe: Check return value of stmpe_reg_read in stmpe_gpio_irq_sync_unlock
gpiolib: acpi: Add a quirk for Acer Nitro ANV14
gpio: bcm-kona: Add missing newline to dev_err format string
gpio: bcm-kona: Make sure GPIO bits are unlocked when requesting IRQ
gpio: bcm-kona: Fix GPIO lock/unlock for banks above bank 0
Masahiro Yamada [Thu, 13 Feb 2025 06:26:44 +0000 (15:26 +0900)]
kbuild: fix linux-headers package build when $(CC) cannot link userspace
Since commit 5f73e7d0386d ("kbuild: refactor cross-compiling
linux-headers package"), the linux-headers Debian package fails to
build when $(CC) cannot build userspace applications, for example,
when using toolchains installed by the 0day bot.
The host programs in the linux-headers package should be rebuilt using
the disto's cross-compiler, ${DEB_HOST_GNU_TYPE}-gcc instead of $(CC).
Hence, the variable 'CC' must be expanded in this shell script instead
of in the top-level Makefile.
Commit f354fc88a72a ("kbuild: install-extmod-build: add missing
quotation marks for CC variable") was not a correct fix because
CC="ccache gcc" should be unrelated when rebuilding userspace tools.
Fixes: 5f73e7d0386d ("kbuild: refactor cross-compiling linux-headers package") Reported-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Closes: https://lore.kernel.org/linux-kbuild/CAK7LNARb3xO3ptBWOMpwKcyf3=zkfhMey5H2KnB1dOmUwM79dA@mail.gmail.com/T/#t Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Masahiro Yamada [Tue, 11 Feb 2025 00:29:06 +0000 (09:29 +0900)]
tools: fix annoying "mkdir -p ..." logs when building tools in parallel
When CONFIG_OBJTOOL=y or CONFIG_DEBUG_INFO_BTF=y, parallel builds
show awkward "mkdir -p ..." logs.
$ make -j16
[ snip ]
mkdir -p /home/masahiro/ref/linux/tools/objtool && make O=/home/masahiro/ref/linux subdir=tools/objtool --no-print-directory -C objtool
mkdir -p /home/masahiro/ref/linux/tools/bpf/resolve_btfids && make O=/home/masahiro/ref/linux subdir=tools/bpf/resolve_btfids --no-print-directory -C bpf/resolve_btfids
Defining MAKEFLAGS=<value> on the command line wipes out command line
switches from the resultant MAKEFLAGS definition, even though the command
line switches are active. [1]
MAKEFLAGS puts all single-letter options into the first word, and that
word will be empty if no single-letter options were given. [2]
However, this breaks if MAKEFLAGS=<value> is given on the command line.
The tools/ and tools/% targets set MAKEFLAGS=<value> on the command
line, which breaks the following code in tools/scripts/Makefile.include:
short-opts := $(firstword -$(MAKEFLAGS))
If MAKEFLAGS really needs modification, it should be done through the
environment variable, as follows:
MAKEFLAGS=<value> $(MAKE) ...
That said, I question whether modifying MAKEFLAGS is necessary here.
The only flag we might want to exclude is --no-print-directory, as the
tools build system changes the working directory. However, people might
find the "Entering/Leaving directory" logs annoying.
Linus Torvalds [Sat, 15 Feb 2025 03:56:12 +0000 (19:56 -0800)]
Merge tag 'alpha-fixes-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha
Pull alpha fixes from Matt Turner:
"A few changes for alpha, including some important fixes for kernel
stack alignment"
* tag 'alpha-fixes-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
alpha: Use str_yes_no() helper in pci_dac_dma_supported()
alpha: Replace one-element array with flexible array member
alpha: align stack for page fault and user unaligned trap handlers
alpha: make stack 16-byte aligned (most cases)
alpha: replace hardcoded stack offsets with autogenerated ones
Linus Torvalds [Sat, 15 Feb 2025 00:49:07 +0000 (16:49 -0800)]
Merge tag 'pci-v6.14-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Update a BUILD_BUG_ON() usage that works on current compilers, but
breaks compilation on gcc 5.3.1 (Alex Williamson)
- Avoid use of FLR for Mediatek MT7922 WiFi; the device previously
worked after a long timeout and fallback to SBR, but after a recent
RRS change it doesn't work at all after FLR (Bjorn Helgaas)
* tag 'pci-v6.14-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Avoid FLR for Mediatek MT7922 WiFi
PCI: Fix BUILD_BUG_ON usage for old gcc
Ashish Kalra [Mon, 10 Feb 2025 22:54:18 +0000 (22:54 +0000)]
x86/sev: Fix broken SNP support with KVM module built-in
Fix issues with enabling SNP host support and effectively SNP support
which is broken with respect to the KVM module being built-in.
SNP host support is enabled in snp_rmptable_init() which is invoked as
device_initcall(). SNP check on IOMMU is done during IOMMU PCI init
(IOMMU_PCI_INIT stage). And for that reason snp_rmptable_init() is
currently invoked via device_initcall() and cannot be invoked via
subsys_initcall() as core IOMMU subsystem gets initialized via
subsys_initcall().
Now, if kvm_amd module is built-in, it gets initialized before SNP host
support is enabled in snp_rmptable_init() :
And then svm_x86_ops->enable_virtualization_cpu()
(svm_enable_virtualization_cpu) programs MSR_VM_HSAVE_PA as following:
wrmsrl(MSR_VM_HSAVE_PA, sd->save_area_pa);
So VM_HSAVE_PA is non-zero before SNP support is enabled on all CPUs.
snp_rmptable_init() gets invoked after svm_enable_virtualization_cpu()
as following :
...
[ 11.256138] kvm_amd: in svm_enable_virtualization_cpu
...
[ 11.264918] SEV-SNP: in snp_rmptable_init
This triggers a #GP exception in snp_rmptable_init() when snp_enable()
is invoked to set SNP_EN in SYSCFG MSR:
This #GP exception is getting triggered due to the following errata for
AMD family 19h Models 10h-1Fh Processors:
Processor may generate spurious #GP(0) Exception on WRMSR instruction:
Description:
The Processor will generate a spurious #GP(0) Exception on a WRMSR
instruction if the following conditions are all met:
- the target of the WRMSR is a SYSCFG register.
- the write changes the value of SYSCFG.SNPEn from 0 to 1.
- One of the threads that share the physical core has a non-zero
value in the VM_HSAVE_PA MSR.
The document being referred to above:
https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/revision-guides/57095-PUB_1_01.pdf
To summarize, with kvm_amd module being built-in, KVM/SVM initialization
happens before host SNP is enabled and this SVM initialization
sets VM_HSAVE_PA to non-zero, which then triggers a #GP when
SYSCFG.SNPEn is being set and this will subsequently cause
SNP_INIT(_EX) to fail with INVALID_CONFIG error as SYSCFG[SnpEn] is not
set on all CPUs.
Essentially SNP host enabling code should be invoked before KVM
initialization, which is currently not the case when KVM is built-in.
Add fix to call snp_rmptable_init() early from iommu_snp_enable()
directly and not invoked via device_initcall() which enables SNP host
support before KVM initialization with kvm_amd module built-in.
Add additional handling for `iommu=off` or `amd_iommu=off` options.
Note that IOMMUs need to be enabled for SNP initialization, therefore,
if host SNP support is enabled but late IOMMU initialization fails
then that will cause PSP driver's SNP_INIT to fail as IOMMU SNP sanity
checks in SNP firmware will fail with invalid configuration error as
below:
Sean Christopherson [Mon, 10 Feb 2025 22:54:02 +0000 (22:54 +0000)]
KVM: SVM: Ensure PSP module is initialized if KVM module is built-in
The kernel's initcall infrastructure lacks the ability to express
dependencies between initcalls, whereas the modules infrastructure
automatically handles dependencies via symbol loading. Ensure the
PSP SEV driver is initialized before proceeding in sev_hardware_setup()
if KVM is built-in as the dependency isn't handled by the initcall
infrastructure.
Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-ID: <f78ddb64087df27e7bcb1ae0ab53f55aa0804fab.1739226950.git.ashish.kalra@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Mon, 10 Feb 2025 22:53:47 +0000 (22:53 +0000)]
crypto: ccp: Add external API interface for PSP module initialization
KVM is dependent on the PSP SEV driver and PSP SEV driver needs to be
loaded before KVM module. In case of module loading any dependent
modules are automatically loaded but in case of built-in modules there
is no inherent mechanism available to specify dependencies between
modules and ensure that any dependent modules are loaded implicitly.
Add a new external API interface for PSP module initialization which
allows PSP SEV driver to be loaded explicitly if KVM is built-in.
Signed-off-by: Sean Christopherson <seanjc@google.com> Co-developed-by: Ashish Kalra <ashish.kalra@amd.com> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-ID: <15279ca0cad56a07cf12834ec544310f85ff5edc.1739226950.git.ashish.kalra@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 14 Feb 2025 23:32:47 +0000 (18:32 -0500)]
Merge tag 'kvmarm-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.14, take #2
- Large set of fixes for vector handling, specially in the interactions
between host and guest state. This fixes a number of bugs affecting
actual deployments, and greatly simplifies the FP/SIMD/SVE handling.
Thanks to Mark Rutland for dealing with this thankless task.
- Fix an ugly race between vcpu and vgic creation/init, resulting in
unexpected behaviours.
- Fix use of kernel VAs at EL2 when emulating timers with nVHE.
Linus Torvalds [Fri, 14 Feb 2025 23:07:11 +0000 (15:07 -0800)]
Merge tag 'thermal-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Fix a regression caused by an inadvertent change of the
THERMAL_GENL_ATTR_CPU_CAPABILITY value in one of the recent thermal
commits (Zhang Rui) and drop a stale piece of documentation (Daniel
Lezcano)"
* tag 'thermal-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/cpufreq_cooling: Remove structure member documentation
thermal/netlink: Prevent userspace segmentation fault by adjusting UAPI header
Linus Torvalds [Fri, 14 Feb 2025 21:56:04 +0000 (13:56 -0800)]
Merge tag 'efi-fixes-for-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"Take the newly introduced EFI_MEMORY_HOT_PLUGGABLE memory attribute
into account when placing the kernel image in memory at boot.
Otherwise, the presence of the kernel image could prevent such a
memory region from being unplugged at runtime if it was 'cold
plugged', i.e., already plugged in at boot time (and exposed via the
EFI memory map).
This should ensure that the new EFI_MEMORY_HOT_PLUGGABLE memory
attribute is used consistently by Linux before it ever turns up in
production, ensuring that we can make meaningful use of it without
running the risk of regressing existing users"
* tag 'efi-fixes-for-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Use BIT_ULL() constants for memory attributes
efi: Avoid cold plugged memory for placing the kernel
Linus Torvalds [Fri, 14 Feb 2025 19:30:53 +0000 (11:30 -0800)]
Merge tag 'io_uring-6.14-20250214' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- fixes for a potential data corruption issue with IORING_OP_URING_CMD,
where not all the SQE data is stable. Will be revisited in the
future, for now it ends up with just always copying it beyond prep to
provide the same guarantees as all other opcodes
- make the waitid opcode setup async data like any other opcodes (no
real fix here, just a consistency thing)
- fix for waitid io_tw_state abuse
- when a buffer group is type is changed, do so by allocating a new
buffer group entry and discard the old one, rather than migrating
* tag 'io_uring-6.14-20250214' of git://git.kernel.dk/linux:
io_uring/uring_cmd: unconditionally copy SQEs at prep time
io_uring/waitid: setup async data in the prep handler
io_uring/uring_cmd: remove dead req_has_async_data() check
io_uring/uring_cmd: switch sqe to async_data on EAGAIN
io_uring/uring_cmd: don't assume io_uring_cmd_data layout
io_uring/kbuf: reallocate buf lists on upgrade
io_uring/waitid: don't abuse io_tw_state
Linus Torvalds [Fri, 14 Feb 2025 19:14:24 +0000 (11:14 -0800)]
Merge tag 'sched_ext-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix lock imbalance in a corner case of dispatch_to_local_dsq()
- Migration disabled tasks were confusing some BPF schedulers and its
handling had a bug. Fix it and simplify the default behavior by
dispatching them automatically
- ops.tick(), ops.disable() and ops.exit_task() were incorrectly
disallowing kfuncs that require the task argument to be the rq
operation is currently operating on and thus is rq-locked.
Allow them.
- Fix autogroup migration handling bug which was occasionally
triggering a warning in the cgroup migration path
- tools/sched_ext, selftest and other misc updates
* tag 'sched_ext-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Use SCX_CALL_OP_TASK in task_tick_scx
sched_ext: Fix the incorrect bpf_list kfunc API in common.bpf.h.
sched_ext: selftests: Fix grammar in tests description
sched_ext: Fix incorrect assumption about migration disabled tasks in task_can_run_on_remote_rq()
sched_ext: Fix migration disabled handling in targeted dispatches
sched_ext: Implement auto local dispatching of migration disabled tasks
sched_ext: Fix incorrect time delta calculation in time_delta()
sched_ext: Fix lock imbalance in dispatch_to_local_dsq()
sched_ext: selftests/dsp_local_on: Fix selftest on UP systems
tools/sched_ext: Add helper to check task migration state
sched_ext: Fix incorrect autogroup migration detection
sched_ext: selftests/dsp_local_on: Fix sporadic failures
selftests/sched_ext: Fix enum resolution
sched_ext: Include task weight in the error state dump
sched_ext: Fixes typos in comments
Ivan Kokshaysky [Tue, 4 Feb 2025 22:35:24 +0000 (23:35 +0100)]
alpha: align stack for page fault and user unaligned trap handlers
do_page_fault() and do_entUna() are special because they use
non-standard stack frame layout. Fix them manually.
Cc: stable@vger.kernel.org Tested-by: Maciej W. Rozycki <macro@orcam.me.uk> Tested-by: Magnus Lindholm <linmag7@gmail.com> Tested-by: Matt Turner <mattst88@gmail.com> Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Ivan Kokshaysky <ink@unseen.parts> Signed-off-by: Matt Turner <mattst88@gmail.com>
Ivan Kokshaysky [Tue, 4 Feb 2025 22:35:23 +0000 (23:35 +0100)]
alpha: make stack 16-byte aligned (most cases)
The problem is that GCC expects 16-byte alignment of the incoming stack
since early 2004, as Maciej found out [1]:
Having actually dug speculatively I can see that the psABI was changed in
GCC 3.5 with commit e5e10fb4a350 ("re PR target/14539 (128-bit long double
improperly aligned)") back in Mar 2004, when the stack pointer alignment
was increased from 8 bytes to 16 bytes, and arch/alpha/kernel/entry.S has
various suspicious stack pointer adjustments, starting with SP_OFF which
is not a whole multiple of 16.
Also, as Magnus noted, "ALPHA Calling Standard" [2] required the same:
D.3.1 Stack Alignment
This standard requires that stacks be octaword aligned at the time a
new procedure is invoked.
However:
- the "normal" kernel stack is always misaligned by 8 bytes, thanks to
the odd number of 64-bit words in 'struct pt_regs', which is the very
first thing pushed onto the kernel thread stack;
- syscall, fault, interrupt etc. handlers may, or may not, receive aligned
stack depending on numerous factors.
Somehow we got away with it until recently, when we ended up with
a stack corruption in kernel/smp.c:smp_call_function_single() due to
its use of 32-byte aligned local data and the compiler doing clever
things allocating it on the stack.
This adds padding between the PAL-saved and kernel-saved registers
so that 'struct pt_regs' have an even number of 64-bit words.
This makes the stack properly aligned for most of the kernel
code, except two handlers which need special threatment.
Note: struct pt_regs doesn't belong in uapi/asm; this should be fixed,
but let's put this off until later.
Ivan Kokshaysky [Tue, 4 Feb 2025 22:35:22 +0000 (23:35 +0100)]
alpha: replace hardcoded stack offsets with autogenerated ones
This allows the assembly in entry.S to automatically keep in sync with
changes in the stack layout (struct pt_regs and struct switch_stack).
Cc: stable@vger.kernel.org Tested-by: Maciej W. Rozycki <macro@orcam.me.uk> Tested-by: Matt Turner <mattst88@gmail.com> Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Ivan Kokshaysky <ink@unseen.parts> Signed-off-by: Matt Turner <mattst88@gmail.com>
Linus Torvalds [Fri, 14 Feb 2025 19:00:42 +0000 (11:00 -0800)]
Merge tag 'cgroup-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix a race window where a newly forked task could escape cgroup.kill
- Remove incorrectly included steal time from cpu.stat::usage_usec
- Minor update in selftest
* tag 'cgroup-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Remove steal time from usage_usec
selftests/cgroup: use bash in test_cpuset_v1_hp.sh
cgroup: fix race between fork and cgroup.kill
Steven Rostedt [Fri, 14 Feb 2025 15:28:20 +0000 (10:28 -0500)]
ring-buffer: Validate the persistent meta data subbuf array
The meta data for a mapped ring buffer contains an array of indexes of all
the subbuffers. The first entry is the reader page, and the rest of the
entries lay out the order of the subbuffers in how the ring buffer link
list is to be created.
The validator currently makes sure that all the entries are within the
range of 0 and nr_subbufs. But it does not check if there are any
duplicates.
While working on the ring buffer, I corrupted this array, where I added
duplicates. The validator did not catch it and created the ring buffer
link list on top of it. Luckily, the corruption was only that the reader
page was also in the writer path and only presented corrupted data but did
not crash the kernel. But if there were duplicates in the writer side,
then it could corrupt the ring buffer link list and cause a crash.
Create a bitmask array with the size of the number of subbuffers. Then
clear it. When walking through the subbuf array checking to see if the
entries are within the range, test if its bit is already set in the
subbuf_mask. If it is, then there is duplicates and fail the validation.
If not, set the corresponding bit and continue.
Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Vincent Donnefort <vdonnefort@google.com> Link: https://lore.kernel.org/20250214102820.7509ddea@gandalf.local.home Fixes: c76883f18e59b ("ring-buffer: Add test if range of boot buffer is valid") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Steven Rostedt [Thu, 13 Feb 2025 18:41:32 +0000 (13:41 -0500)]
tracing: Have the error of __tracing_resize_ring_buffer() passed to user
Currently if __tracing_resize_ring_buffer() returns an error, the
tracing_resize_ringbuffer() returns -ENOMEM. But it may not be a memory
issue that caused the function to fail. If the ring buffer is memory
mapped, then the resizing of the ring buffer will be disabled. But if the
user tries to resize the buffer, it will get an -ENOMEM returned, which is
confusing because there is plenty of memory. The actual error returned was
-EBUSY, which would make much more sense to the user.
Steven Rostedt [Thu, 13 Feb 2025 18:19:57 +0000 (13:19 -0500)]
ring-buffer: Unlock resize on mmap error
Memory mapping the tracing ring buffer will disable resizing the buffer.
But if there's an error in the memory mapping like an invalid parameter,
the function exits out without re-enabling the resizing of the ring
buffer, preventing the ring buffer from being resized after that.
Linus Torvalds [Fri, 14 Feb 2025 17:46:51 +0000 (09:46 -0800)]
Merge tag 'iommu-fixes-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- core: fix potential memory leak in iopf_queue_remove_device()
- Intel VT-d: handle faults correctly in intel_iommu_drain_pasid_prq()
- AMD-Vi: fix faults happening in resume path
- typo and spelling fixes
* tag 'iommu-fixes-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/vt-d: Make intel_iommu_drain_pasid_prq() cover faults for RID
iommu/exynos: Fix typos
iommu: Fix a spelling error
iommu/amd: Expicitly enable CNTRL.EPHEn bit in resume path
iommu: Fix potential memory leak in iopf_queue_remove_device()
Linus Torvalds [Fri, 14 Feb 2025 16:15:17 +0000 (08:15 -0800)]
Merge tag 'for-linus-6.14-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Three fixes to xen-swiotlb driver:
- two fixes for issues coming up due to another fix in 6.12
- addition of an __init annotation"
* tag 'for-linus-6.14-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Xen/swiotlb: mark xen_swiotlb_fixup() __init
x86/xen: allow larger contiguous memory regions in PV guests
xen/swiotlb: relax alignment requirements
Jann Horn [Fri, 14 Feb 2025 01:39:50 +0000 (02:39 +0100)]
partitions: mac: fix handling of bogus partition table
Fix several issues in partition probing:
- The bailout for a bad partoffset must use put_dev_sector(), since the
preceding read_part_sector() succeeded.
- If the partition table claims a silly sector size like 0xfff bytes
(which results in partition table entries straddling sector boundaries),
bail out instead of accessing out-of-bounds memory.
- We must not assume that the partition table contains proper NUL
termination - use strnlen() and strncmp() instead of strlen() and
strcmp().
David Hildenbrand [Fri, 24 Jan 2025 18:15:23 +0000 (19:15 +0100)]
nouveau/svm: fix missing folio unlock + put after make_device_exclusive_range()
In case we have to retry the loop, we are missing to unlock+put the
folio. In that case, we will keep failing make_device_exclusive_range()
because we cannot grab the folio lock, and even return from the function
with the folio locked and referenced, effectively never succeeding the
make_device_exclusive_range().
While at it, convert the other unlock+put to use a folio as well.
John Keeping [Sat, 8 Feb 2025 12:41:44 +0000 (12:41 +0000)]
serial: 8250: Fix fifo underflow on flush
When flushing the serial port's buffer, uart_flush_buffer() calls
kfifo_reset() but if there is an outstanding DMA transfer then the
completion function will consume data from the kfifo via
uart_xmit_advance(), underflowing and leading to ongoing DMA as the
driver tries to transmit another 2^32 bytes.
This is readily reproduced with serial-generic and amidi sending even
short messages as closing the device on exit will wait for the fifo to
drain and in the underflow case amidi hangs for 30 seconds on exit in
tty_wait_until_sent(). A trace of that gives:
Since the port lock is held in when the kfifo is reset in
uart_flush_buffer() and in __dma_tx_complete(), adding a flush_buffer
hook to adjust the outstanding DMA byte count is sufficient to avoid the
kfifo underflow.
Jos Wang [Thu, 13 Feb 2025 13:49:21 +0000 (21:49 +0800)]
usb: typec: tcpm: PSSourceOffTimer timeout in PR_Swap enters ERROR_RECOVERY
As PD2.0 spec ("6.5.6.2 PSSourceOffTimer")，the PSSourceOffTimer is
used by the Policy Engine in Dual-Role Power device that is currently
acting as a Sink to timeout on a PS_RDY Message during a Power Role
Swap sequence. This condition leads to a Hard Reset for USB Type-A and
Type-B Plugs and Error Recovery for Type-C plugs and return to USB
Default Operation.
Therefore, after PSSourceOffTimer timeout, the tcpm state machine should
switch from PR_SWAP_SNK_SRC_SINK_OFF to ERROR_RECOVERY. This can also
solve the test items in the USB power delivery compliance test:
TEST.PD.PROT.SNK.12 PR_Swap – PSSourceOffTimer Timeout
Elson Roy Serrao [Thu, 6 Feb 2025 19:39:50 +0000 (11:39 -0800)]
usb: roles: set switch registered flag early on
The role switch registration and set_role() can happen in parallel as they
are invoked independent of each other. There is a possibility that a driver
might spend significant amount of time in usb_role_switch_register() API
due to the presence of time intensive operations like component_add()
which operate under common mutex. This leads to a time window after
allocating the switch and before setting the registered flag where the set
role notifications are dropped. Below timeline summarizes this behavior
Thread1 | Thread2
usb_role_switch_register() |
| |
---> allocate switch |
| |
---> component_add() | usb_role_switch_set_role()
| | |
| | --> Drop role notifications
| | since sw->registered
| | flag is not set.
| |
--->Set registered flag.|
To avoid this, set the registered flag early on in the switch register
API.
Fixes: b787a3e78175 ("usb: roles: don't get/set_role() when usb_role_switch is unregistered") Cc: stable <stable@kernel.org> Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250206193950.22421-1-quic_eserrao@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frederic Weisbecker [Wed, 12 Feb 2025 13:55:14 +0000 (14:55 +0100)]
usb: gadget: uvc: Fix unstarted kthread worker
The behaviour of kthread_create_worker() was recently changed to align
with the one of kthread_create(). The kthread worker is created but not
awaken by default. This is to allow the use of kthread_affine_preferred()
and kthread_bind[_mask]() with kthread workers. In order to keep the
old behaviour and wake the kthread up, kthread_run_worker() must be
used. All the pre-existing users have been converted, except for UVC
that was introduced in the same merge window as the API change.
This results in hangs:
INFO: task UVCG:82 blocked for more than 491 seconds.
Tainted: G T 6.13.0-rc2-00014-gb04e317b5226 #1
task:UVCG state:D stack:0 pid:82
Call Trace:
__schedule
schedule
schedule_preempt_disabled
kthread
? kthread_flush_work
ret_from_fork
ret_from_fork_asm
entry_INT80_32
Fix this with converting UVCG kworker to the new API.
Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202502121025.55bfa801-lkp@intel.com Fixes: f0bbfbd16b3b ("usb: gadget: uvc: rework to enqueue in pump worker from encoded queue") Cc: stable <stable@kernel.org> Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20250212135514.30539-1-frederic@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lei Huang [Wed, 12 Feb 2025 09:38:29 +0000 (17:38 +0800)]
USB: quirks: add USB_QUIRK_NO_LPM quirk for Teclast dist
Teclast disk used on Huawei hisi platforms doesn't work well,
losing connectivity intermittently if LPM is enabled.
Add quirk disable LPM to resolve the issue.
Roy Luo [Tue, 4 Feb 2025 23:36:42 +0000 (23:36 +0000)]
usb: gadget: core: flush gadget workqueue after device removal
device_del() can lead to new work being scheduled in gadget->work
workqueue. This is observed, for example, with the dwc3 driver with the
following call stack:
device_del()
gadget_unbind_driver()
usb_gadget_disconnect_locked()
dwc3_gadget_pullup()
dwc3_gadget_soft_disconnect()
usb_gadget_set_state()
schedule_work(&gadget->work)
Move flush_work() after device_del() to ensure the workqueue is cleaned
up.
Fixes: 5702f75375aa9 ("usb: gadget: udc-core: move sysfs_notify() to a workqueue") Cc: stable <stable@kernel.org> Signed-off-by: Roy Luo <royluo@google.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20250204233642.666991-1-royluo@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Eichenberger [Mon, 3 Feb 2025 10:58:24 +0000 (11:58 +0100)]
usb: core: fix pipe creation for get_bMaxPacketSize0
When usb_control_msg is used in the get_bMaxPacketSize0 function, the
USB pipe does not include the endpoint device number. This can cause
failures when a usb hub port is reinitialized after encountering a bad
cable connection. As a result, the system logs the following error
messages:
usb usb2-port1: cannot reset (err = -32)
usb usb2-port1: Cannot enable. Maybe the USB cable is bad?
usb usb2-port1: attempt power cycle
usb 2-1: new high-speed USB device number 5 using ci_hdrc
usb 2-1: device descriptor read/8, error -71
The problem began after commit 85d07c556216 ("USB: core: Unite old
scheme and new scheme descriptor reads"). There
usb_get_device_descriptor was replaced with get_bMaxPacketSize0. Unlike
usb_get_device_descriptor, the get_bMaxPacketSize0 function uses the
macro usb_rcvaddr0pipe, which does not include the endpoint device
number. usb_get_device_descriptor, on the other hand, used the macro
usb_rcvctrlpipe, which includes the endpoint device number.
By modifying the get_bMaxPacketSize0 function to use usb_rcvctrlpipe
instead of usb_rcvaddr0pipe, the issue can be resolved. This change will
ensure that the endpoint device number is included in the USB pipe,
preventing reinitialization failures. If the endpoint has not set the
device number yet, it will still work because the device number is 0 in
udev.
Cc: stable <stable@kernel.org> Fixes: 85d07c556216 ("USB: core: Unite old scheme and new scheme descriptor reads") Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20250203105840.17539-1-eichest@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Selvarasu Ganesan [Sat, 1 Feb 2025 16:39:02 +0000 (22:09 +0530)]
usb: dwc3: Fix timeout issue during controller enter/exit from halt state
There is a frequent timeout during controller enter/exit from halt state
after toggling the run_stop bit by SW. This timeout occurs when
performing frequent role switches between host and device, causing
device enumeration issues due to the timeout. This issue was not present
when USB2 suspend PHY was disabled by passing the SNPS quirks
(snps,dis_u2_susphy_quirk and snps,dis_enblslpm_quirk) from the DTS.
However, there is a requirement to enable USB2 suspend PHY by setting of
GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY bits when controller starts
in gadget or host mode results in the timeout issue.
This commit addresses this timeout issue by ensuring that the bits
GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY are cleared before starting
the dwc3_gadget_run_stop sequence and restoring them after the
dwc3_gadget_run_stop sequence is completed.
Mathias Nyman [Thu, 6 Feb 2025 15:18:36 +0000 (17:18 +0200)]
USB: Add USB_QUIRK_NO_LPM quirk for sony xperia xz1 smartphone
The fastboot tool for communicating with Android bootloaders does not
work reliably with this device if USB 2 Link Power Management (LPM)
is enabled.
Various fastboot commands are affected, including the
following, which usually reproduces the problem within two tries:
fastboot getvar kernel
getvar:kernel FAILED (remote: 'GetVar Variable Not found')
This issue was hidden on many systems up until commit 63a1f8454962
("xhci: stored cached port capability values in one place") as the xhci
driver failed to detect USB 2 LPM support if USB 3 ports were listed
before USB 2 ports in the "supported protocol capabilities".
Adding the quirk resolves the issue. No drawbacks are expected since
the device uses different USB product IDs outside of fastboot mode, and
since fastboot commands worked before, until LPM was enabled on the
tested system by the aforementioned commit.
Based on a patch from Forest <forestix@nom.one> from which most of the
code and commit message is taken.
Marek Vasut [Sun, 9 Feb 2025 14:56:11 +0000 (15:56 +0100)]
USB: cdc-acm: Fill in Renesas R-Car D3 USB Download mode quirk
Add Renesas R-Car D3 USB Download mode quirk and update comments
on all the other Renesas R-Car USB Download mode quirks to discern
them from each other. This follows R-Car Series, 3rd Generation
reference manual Rev.2.00 chapter 19.2.8 USB download mode .
Fixes: 6d853c9e4104 ("usb: cdc-acm: Add DISABLE_ECHO for Renesas USB Download mode") Cc: stable <stable@kernel.org> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20250209145708.106914-1-marek.vasut+renesas@mailbox.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jann Horn [Wed, 12 Feb 2025 18:15:16 +0000 (19:15 +0100)]
usb: cdc-acm: Fix handling of oversized fragments
If we receive an initial fragment of size 8 bytes which specifies a wLength
of 1 byte (so the reassembled message is supposed to be 9 bytes long), and
we then receive a second fragment of size 9 bytes (which is not supposed to
happen), we currently wrongly bypass the fragment reassembly code but still
pass the pointer to the acm->notification_buffer to
acm_process_notification().
Make this less wrong by always going through fragment reassembly when we
expect more fragments.
Before this patch, receiving an overlong fragment could lead to `newctrl`
in acm_process_notification() being uninitialized data (instead of data
coming from the device).
Jann Horn [Wed, 12 Feb 2025 18:15:15 +0000 (19:15 +0100)]
usb: cdc-acm: Check control transfer buffer size before access
If the first fragment is shorter than struct usb_cdc_notification, we can't
calculate an expected_size. Log an error and discard the notification
instead of reading lengths from memory outside the received data, which can
lead to memory corruption when the expected_size decreases between
fragments, causing `expected_size - acm->nb_index` to wrap.
This issue has been present since the beginning of git history; however,
it only leads to memory corruption since commit ea2583529cd1
("cdc-acm: reassemble fragmented notifications").
A mitigating factor is that acm_ctrl_irq() can only execute after userspace
has opened /dev/ttyACM*; but if ModemManager is running, ModemManager will
do that automatically depending on the USB device's vendor/product IDs and
its other interfaces.
Michal Pecio [Tue, 28 Jan 2025 09:45:29 +0000 (10:45 +0100)]
usb: xhci: Restore xhci_pci support for Renesas HCs
Some Renesas HCs require firmware upload to work, this is handled by the
xhci_pci_renesas driver. Other variants of those chips load firmware from
a SPI flash and are ready to work with xhci_pci alone.
A refactor merged in v6.12 broke the latter configuration so that users
are finding their hardware ignored by the normal driver and are forced to
enable the firmware loader which isn't really necessary on their systems.
Let xhci_pci work with those chips as before when the firmware loader is
disabled by kernel configuration.
Fixes: 25f51b76f90f ("xhci-pci: Make xhci-pci-renesas a proper modular driver") Cc: stable <stable@kernel.org> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219616 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219726 Signed-off-by: Michal Pecio <michal.pecio@gmail.com> Tested-by: Nicolai Buchwitz <nb@tipi-net.de> Link: https://lore.kernel.org/r/20250128104529.58a79bfc@foxbook Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Huacai Chen [Sun, 2 Feb 2025 12:49:35 +0000 (20:49 +0800)]
USB: pci-quirks: Fix HCCPARAMS register error for LS7A EHCI
LS7A EHCI controller doesn't have extended capabilities, so the EECP
(EHCI Extended Capabilities Pointer) field of HCCPARAMS register should
be 0x0, but it reads as 0xa0 now. This is a hardware flaw and will be
fixed in future, now just clear the EECP field to avoid error messages
on boot:
projects / users / jedix / linux-maple.git / log