Linus Torvalds [Thu, 23 Dec 2021 17:55:58 +0000 (09:55 -0800)]
Merge tag 'sound-5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Quite a few small fixes, hopefully the last batch for 5.16.
Most of them are device-specific quirks and/or fixes, and nothing
looks scary for the late stage"
* tag 'sound-5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix quirk for Clevo NJ51CU
ALSA: rawmidi - fix the uninitalized user_pversion
ALSA: hda: intel-sdw-acpi: go through HDAS ACPI at max depth of 2
ALSA: hda: intel-sdw-acpi: harden detection of controller
ALSA: hda/hdmi: Disable silent stream on GLK
ALSA: hda/realtek: fix mute/micmute LEDs for a HP ProBook
ASoC: meson: aiu: Move AIU_I2S_MISC hold setting to aiu-fifo-i2s
ASoC: meson: aiu: fifo: Add missing dma_coerce_mask_and_coherent()
ASoC: tas2770: Fix setting of high sample rates
ASoC: rt5682: fix the wrong jack type detected
ALSA: hda/realtek: Add new alc285-hp-amp-init model
ALSA: hda/realtek: Amp init fixup for HP ZBook 15 G6
ASoC: tegra: Restore headphones jack name on Nyan Big
ASoC: tegra: Add DAPM switches for headphones and mic jack
ALSA: jack: Check the return value of kstrdup()
ALSA: drivers: opl3: Fix incorrect use of vp->state
ASoC: SOF: Intel: pci-tgl: add new ADL-P variant
ASoC: SOF: Intel: pci-tgl: add ADL-N support
Linus Torvalds [Thu, 23 Dec 2021 17:44:29 +0000 (09:44 -0800)]
Merge tag 'gpio-fixes-for-v5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix interrupts when replugging the device in gpio-dln2
- remove the arbitrary timeout on virtio requests from gpio-virtio
* tag 'gpio-fixes-for-v5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: virtio: remove timeout
gpio: dln2: Fix interrupts when replugging the device
Linus Torvalds [Thu, 23 Dec 2021 17:37:59 +0000 (09:37 -0800)]
Merge tag 'mmc-v5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Disable card detect during shutdown
MMC host:
- mmci: Fixup tuning support for stm32_sdmmc
- meson-mx-sdhc: Fix support for multi-block SDIO commands
- sdhci-tegra: Fix support for eMMC HS400ES mode"
* tag 'mmc-v5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: mmci: stm32: clear DLYB_CR after sending tuning command
mmc: meson-mx-sdhc: Set MANUAL_STOP for multi-block SDIO commands
mmc: core: Disable card detect during shutdown
mmc: sdhci-tegra: Fix switch to HS400ES mode
Linus Torvalds [Thu, 23 Dec 2021 17:22:34 +0000 (09:22 -0800)]
Merge tag 'arm-fixes-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is my last set of fixes for 5.16, including
- multiple code fixes for the op-tee firmware driver
- Two patches for allwinner SoCs, one fixing the phy mode on a board,
the other one fixing a driver bug in the "RSB" bus driver. This was
originally targeted for 5.17, but seemed worth moving to 5.16
- Two small fixes for devicetree files on i.MX platforms, resolving
problems with ethernet and i2c"
* tag 'arm-fixes-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
optee: Suppress false positive kmemleak report in optee_handle_rpc()
tee: optee: Fix incorrect page free bug
arm64: dts: lx2160a: fix scl-gpios property name
tee: handle lookup of shm with reference count 0
ARM: dts: imx6qdl-wandboard: Fix Ethernet support
bus: sunxi-rsb: Fix shutdown
arm64: dts: allwinner: orangepi-zero-plus: fix PHY mode
Linus Torvalds [Wed, 22 Dec 2021 19:39:53 +0000 (11:39 -0800)]
Merge tag 'fixes-2021-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix memblock_phys_alloc() section mismatch error
There are section mismatch errors when compiler refuses to inline
one-line wrapper memblock_phys_alloc(). Make memblock_phys_alloc()
__always_inline to avoid these mismatch issues"
* tag 'fixes-2021-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: fix memblock_phys_alloc() section mismatch error
Werner Sembach [Wed, 15 Dec 2021 19:16:46 +0000 (20:16 +0100)]
ALSA: hda/realtek: Fix quirk for Clevo NJ51CU
The Clevo NJ51CU comes either with the ALC293 or the ALC256 codec, but uses
the 0x8686 subproduct id in both cases. The ALC256 codec needs a different
quirk for the headset microphone working and and edditional quirk for sound
working after suspend and resume.
When waking up from s3 suspend the Coef 0x10 is set to 0x0220 instead of
0x0020 on the ALC256 codec. Setting the value manually makes the sound
work again. This patch does this automatically.
[ minor coding style fix by tiwai ]
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Fixes: b5acfe152abaa ("ALSA: hda/realtek: Add some Clove SSID in the ALC293(ALC1220)") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211215191646.844644-1-wse@tuxedocomputers.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
Jaroslav Kysela [Sat, 18 Dec 2021 12:39:25 +0000 (13:39 +0100)]
ALSA: rawmidi - fix the uninitalized user_pversion
The user_pversion was uninitialized for the user space file structure
in the open function, because the file private structure use
kmalloc for the allocation.
The kernel ALSA sequencer code clears the file structure, so no additional
fixes are required.
Libin Yang [Tue, 21 Dec 2021 01:08:17 +0000 (09:08 +0800)]
ALSA: hda: intel-sdw-acpi: go through HDAS ACPI at max depth of 2
In the HDAS ACPI scope, the SoundWire may not be the direct child of HDAS.
It needs to go through the ACPI table at max depth of 2 to find the
SoundWire device from HDAS.
Libin Yang [Tue, 21 Dec 2021 01:08:16 +0000 (09:08 +0800)]
ALSA: hda: intel-sdw-acpi: harden detection of controller
The existing code currently sets a pointer to an ACPI handle before
checking that it's actually a SoundWire controller. This can lead to
issues where the graph walk continues and eventually fails, but the
pointer was set already.
This patch changes the logic so that the information provided to
the caller is set when a controller is found.
Ville Syrjälä [Wed, 22 Dec 2021 14:53:50 +0000 (16:53 +0200)]
ALSA: hda/hdmi: Disable silent stream on GLK
The silent stream stuff recurses back into i915 audio
component .get_power() from the .pin_eld_notify() hook.
On GLK this will deadlock as i915 may already be holding
the relevant modeset locks during .pin_eld_notify() and
the GLK audio vs. CDCLK workaround will try to grab the
same locks from .get_power().
Until someone comes up with a better fix just disable the
silent stream support on GLK.
Linus Torvalds [Wed, 22 Dec 2021 18:17:16 +0000 (10:17 -0800)]
Merge tag 'for-5.16/parisc-7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- Fix a bug in the C code which calculates the relevant futex spinlock
based on the futex virtual address. In some cases a wrong spinlock
(compared to what is calculated in the assembly code path) was
choosen which then can lead to deadlocks.
- The 64-bit kernel missed to clip the LWS number in the
Light-weight-syscall path for 32-bit processes.
- Prevent CPU register dump to show stale value in IIR register on
access rights traps.
- Remove unused ARCH_DEFCONFIG entries.
* tag 'for-5.16/parisc-7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: remove ARCH_DEFCONFIG
parisc: Fix mask used to select futex spinlock
parisc: Correct completer in lws start
parisc: Clear stale IIR value on instruction access rights trap
Linus Torvalds [Wed, 22 Dec 2021 18:11:17 +0000 (10:11 -0800)]
Merge tag 'for-linus-5.16-3' of git://github.com/cminyard/linux-ipmi
Pull IPMI fixes from Corey Minyard:
"Fix some IPMI crashes
Some crash fixes have come in dealing with various error handling
issues. They have sat in next for 5 days or more without issue, and
they are fairly critical"
* tag 'for-linus-5.16-3' of git://github.com/cminyard/linux-ipmi:
ipmi: Fix UAF when uninstall ipmi_si and ipmi_msghandler module
ipmi: fix initialization when workqueue allocation fails
ipmi: bail out if init_srcu_struct fails
ipmi: ssif: initialize ssif_info->client early
Linus Torvalds [Wed, 22 Dec 2021 18:06:32 +0000 (10:06 -0800)]
Merge tag 'tomoyo-pr-20211222' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1
Pull tomoyo fixes from Tetsuo Handa:
"Two overhead reduction patches for testing/fuzzing environment"
* tag 'tomoyo-pr-20211222' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1:
tomoyo: use hweight16() in tomoyo_domain_quota_is_ok()
tomoyo: Check exceeded quota early in tomoyo_domain_quota_is_ok().
Fix modpost Section mismatch error in memblock_phys_alloc()
[...]
WARNING: modpost: vmlinux.o(.text.unlikely+0x1dcc): Section mismatch in reference
from the function memblock_phys_alloc() to the function .init.text:memblock_phys_alloc_range()
The function memblock_phys_alloc() references
the function __init memblock_phys_alloc_range().
This is often because memblock_phys_alloc lacks a __init
annotation or the annotation of memblock_phys_alloc_range is wrong.
ERROR: modpost: Section mismatches detected.
Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them.
[...]
memblock_phys_alloc() is a one-line wrapper, make it __always_inline to
avoid these section mismatches.
Reported-by: k2ci <kernel-bot@kylinos.cn> Suggested-by: Mike Rapoport <rppt@kernel.org> Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
[rppt: slightly massaged changelog ] Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Link: https://lore.kernel.org/r/20211217020754.2874872-1-liu.yun@linux.dev
Takashi Iwai [Wed, 22 Dec 2021 17:07:27 +0000 (18:07 +0100)]
Merge tag 'asoc-fix-v5.16-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.16
This is a relatively large set of driver specific changes so it may make
sense to hold off to v5.17, though picking some over might be good.
It's a combination of new device IDs and fixes for various driver
specific things which are all small and of the usual "really bad if
you're running into them" level, especially the Tegra ones.
Linus Torvalds [Tue, 21 Dec 2021 20:31:55 +0000 (12:31 -0800)]
Merge tag 'pm-5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a recent regression causing the loop in dpm_prepare() to become
infinite if one of the device ->prepare() callbacks returns an error"
* tag 'pm-5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: Fix error handling in dpm_prepare()
Linus Torvalds [Tue, 21 Dec 2021 20:25:57 +0000 (12:25 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- Fix for compilation of selftests on non-x86 architectures
- Fix for kvm_run->if_flag on SEV-ES
- Fix for page table use-after-free if yielding during exit_mm()
- Improve behavior when userspace starts a nested guest with invalid
state
- Fix missed wakeup with assigned devices but no VT-d posted interrupts
- Do not tell userspace to save/restore an unsupported PMU MSR
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: Wake vCPU when delivering posted IRQ even if vCPU == this vCPU
KVM: selftests: Add test to verify TRIPLE_FAULT on invalid L2 guest state
KVM: VMX: Fix stale docs for kvm-intel.emulate_invalid_guest_state
KVM: nVMX: Synthesize TRIPLE_FAULT for L2 if emulation is required
KVM: VMX: Always clear vmx->fail on emulation_required
selftests: KVM: Fix non-x86 compiling
KVM: x86: Always set kvm_run->if_flag
KVM: x86/mmu: Don't advance iterator after restart due to yielding
KVM: x86: remove PMU FIXED_CTR3 from msrs_to_save_all
John David Anglin [Tue, 21 Dec 2021 18:33:16 +0000 (13:33 -0500)]
parisc: Fix mask used to select futex spinlock
The address bits used to select the futex spinlock need to match those used in
the LWS code in syscall.S. The mask 0x3f8 only selects 7 bits. It should
select 8 bits.
This change fixes the glibc nptl/tst-cond24 and nptl/tst-cond25 tests.
Signed-off-by: John David Anglin <dave.anglin@bell.net> Fixes: 53a42b6324b8 ("parisc: Switch to more fine grained lws locks") Cc: stable@vger.kernel.org # 5.10+ Signed-off-by: Helge Deller <deller@gmx.de>
John David Anglin [Tue, 21 Dec 2021 18:21:22 +0000 (13:21 -0500)]
parisc: Correct completer in lws start
The completer in the "or,ev %r1,%r30,%r30" instruction is reversed, so we are
not clipping the LWS number when we are called from a 32-bit process (W=0).
We need to nulify the following depdi instruction when the least-significant
bit of %r30 is 1.
If the %r20 register is not clipped, a user process could perform a LWS call
that would branch to an undefined location in the kernel and potentially crash
the machine.
Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 4.19+ Signed-off-by: Helge Deller <deller@gmx.de>
Sean Christopherson [Tue, 21 Dec 2021 15:37:00 +0000 (10:37 -0500)]
KVM: VMX: Wake vCPU when delivering posted IRQ even if vCPU == this vCPU
Drop a check that guards triggering a posted interrupt on the currently
running vCPU, and more importantly guards waking the target vCPU if
triggering a posted interrupt fails because the vCPU isn't IN_GUEST_MODE.
If a vIRQ is delivered from asynchronous context, the target vCPU can be
the currently running vCPU and can also be blocking, in which case
skipping kvm_vcpu_wake_up() is effectively dropping what is supposed to
be a wake event for the vCPU.
The "do nothing" logic when "vcpu == running_vcpu" mostly works only
because the majority of calls to ->deliver_posted_interrupt(), especially
when using posted interrupts, come from synchronous KVM context. But if
a device is exposed to the guest using vfio-pci passthrough, the VFIO IRQ
and vCPU are bound to the same pCPU, and the IRQ is _not_ configured to
use posted interrupts, wake events from the device will be delivered to
KVM from IRQ context, e.g.
Vincent Whitchurch [Mon, 20 Dec 2021 13:06:56 +0000 (14:06 +0100)]
gpio: virtio: remove timeout
The driver imposes an arbitrary one second timeout on virtio requests,
but the specification doesn't prevent the virtio device from taking
longer to process requests, so remove this timeout to support all
systems and device implementations.
Fixes: 3a29355a22c0275fe86 ("gpio: Add virtio-gpio driver") Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Yann Gautier [Wed, 15 Dec 2021 14:17:26 +0000 (15:17 +0100)]
mmc: mmci: stm32: clear DLYB_CR after sending tuning command
During test campaign, and especially after several unbind/bind sequences,
it has been seen that the SD-card on SDMMC1 thread could freeze.
The freeze always appear on a CMD23 following a CMD19.
Checking SDMMC internal registers shows that the tuning command (CMD19)
has failed.
The freeze is then due to the delay block involved in the tuning sequence.
To correct this, clear the delay block register DLYB_CR register after
the tuning commands.
Linus Torvalds [Tue, 21 Dec 2021 01:26:42 +0000 (17:26 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Last fixes before holidays. Nothing very exciting:
- Work around a HW bug in HNS HIP08
- Recent memory leak regression in qib
- Incorrect use of kfree() for vmalloc memory in hns"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/hns: Replace kfree() with kvfree()
IB/qib: Fix memory leak in qib_user_sdma_queue_pkts()
RDMA/hns: Fix RNR retransmission issue for HIP08
Linus Torvalds [Mon, 20 Dec 2021 18:13:30 +0000 (10:13 -0800)]
Merge tag 'regulator-fix-v5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"Binding fix for v5.16
This fixes problems validating DT bindings using op_mode which wasn't
described as it should have been when converting to DT schema"
* tag 'regulator-fix-v5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: dt-bindings: samsung,s5m8767: add missing op_mode to bucks
Helge Deller [Wed, 8 Dec 2021 10:06:52 +0000 (11:06 +0100)]
parisc: Clear stale IIR value on instruction access rights trap
When a trap 7 (Instruction access rights) occurs, this means the CPU
couldn't execute an instruction due to missing execute permissions on
the memory region. In this case it seems the CPU didn't even fetched
the instruction from memory and thus did not store it in the cr19 (IIR)
register before calling the trap handler. So, the trap handler will find
some random old stale value in cr19.
This patch simply overwrites the stale IIR value with a constant magic
"bad food" value (0xbaadf00d), in the hope people don't start to try to
understand the various random IIR values in trap 7 dumps.
Noticed-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
Sean Christopherson [Tue, 7 Dec 2021 19:30:06 +0000 (19:30 +0000)]
KVM: selftests: Add test to verify TRIPLE_FAULT on invalid L2 guest state
Add a selftest to attempt to enter L2 with invalid guests state by
exiting to userspace via I/O from L2, and then using KVM_SET_SREGS to set
invalid guest state (marking TR unusable is arbitrary chosen for its
relative simplicity).
This is a regression test for a bug introduced by commit c8607e4a086f
("KVM: x86: nVMX: don't fail nested VM entry on invalid guest state if
!from_vmentry"), which incorrectly set vmx->fail=true when L2 had invalid
guest state and ultimately triggered a WARN due to nested_vmx_vmexit()
seeing vmx->fail==true while attempting to synthesize a nested VM-Exit.
The is also a functional test to verify that KVM sythesizes TRIPLE_FAULT
for L2, which is somewhat arbitrary behavior, instead of emulating L2.
KVM should never emulate L2 due to invalid guest state, as it's
architecturally impossible for L1 to run an L2 guest with invalid state
as nested VM-Enter should always fail, i.e. L1 needs to do the emulation.
Stuffing state via KVM ioctl() is a non-architctural, out-of-band case,
hence the TRIPLE_FAULT being rather arbitrary.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211207193006.120997-5-seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 7 Dec 2021 19:30:05 +0000 (19:30 +0000)]
KVM: VMX: Fix stale docs for kvm-intel.emulate_invalid_guest_state
Update the documentation for kvm-intel's emulate_invalid_guest_state to
rectify the description of KVM's default behavior, and to document that
the behavior and thus parameter only applies to L1.
Fixes: a27685c33acc ("KVM: VMX: Emulate invalid guest state by default") Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211207193006.120997-4-seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 7 Dec 2021 19:30:04 +0000 (19:30 +0000)]
KVM: nVMX: Synthesize TRIPLE_FAULT for L2 if emulation is required
Synthesize a triple fault if L2 guest state is invalid at the time of
VM-Enter, which can happen if L1 modifies SMRAM or if userspace stuffs
guest state via ioctls(), e.g. KVM_SET_SREGS. KVM should never emulate
invalid guest state, since from L1's perspective, it's architecturally
impossible for L2 to have invalid state while L2 is running in hardware.
E.g. attempts to set CR0 or CR4 to unsupported values will either VM-Exit
or #GP.
Modifying vCPU state via RSM+SMRAM and ioctl() are the only paths that
can trigger this scenario, as nested VM-Enter correctly rejects any
attempt to enter L2 with invalid state.
RSM is a straightforward case as (a) KVM follows AMD's SMRAM layout and
behavior, and (b) Intel's SDM states that loading reserved CR0/CR4 bits
via RSM results in shutdown, i.e. there is precedent for KVM's behavior.
Following AMD's SMRAM layout is important as AMD's layout saves/restores
the descriptor cache information, including CS.RPL and SS.RPL, and also
defines all the fields relevant to invalid guest state as read-only, i.e.
so long as the vCPU had valid state before the SMI, which is guaranteed
for L2, RSM will generate valid state unless SMRAM was modified. Intel's
layout saves/restores only the selector, which means that scenarios where
the selector and cached RPL don't match, e.g. conforming code segments,
would yield invalid guest state. Intel CPUs fudge around this issued by
stuffing SS.RPL and CS.RPL on RSM. Per Intel's SDM on the "Default
Treatment of RSM", paraphrasing for brevity:
IF internal storage indicates that the [CPU was post-VMXON]
THEN
enter VMX operation (root or non-root);
restore VMX-critical state as defined in Section 34.14.1;
set to their fixed values any bits in CR0 and CR4 whose values must
be fixed in VMX operation [unless coming from an unrestricted guest];
IF RFLAGS.VM = 0 AND (in VMX root operation OR the
“unrestricted guest” VM-execution control is 0)
THEN
CS.RPL := SS.DPL;
SS.RPL := SS.DPL;
FI;
restore current VMCS pointer;
FI;
Note that Intel CPUs also overwrite the fixed CR0/CR4 bits, whereas KVM
will sythesize TRIPLE_FAULT in this scenario. KVM's behavior is allowed
as both Intel and AMD define CR0/CR4 SMRAM fields as read-only, i.e. the
only way for CR0 and/or CR4 to have illegal values is if they were
modified by the L1 SMM handler, and Intel's SDM "SMRAM State Save Map"
section states "modifying these registers will result in unpredictable
behavior".
KVM's ioctl() behavior is less straightforward. Because KVM allows
ioctls() to be executed in any order, rejecting an ioctl() if it would
result in invalid L2 guest state is not an option as KVM cannot know if
a future ioctl() would resolve the invalid state, e.g. KVM_SET_SREGS, or
drop the vCPU out of L2, e.g. KVM_SET_NESTED_STATE. Ideally, KVM would
reject KVM_RUN if L2 contained invalid guest state, but that carries the
risk of a false positive, e.g. if RSM loaded invalid guest state and KVM
exited to userspace. Setting a flag/request to detect such a scenario is
undesirable because (a) it's extremely unlikely to add value to KVM as a
whole, and (b) KVM would need to consider ioctl() interactions with such
a flag, e.g. if userspace migrated the vCPU while the flag were set.
Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211207193006.120997-3-seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 7 Dec 2021 19:30:03 +0000 (19:30 +0000)]
KVM: VMX: Always clear vmx->fail on emulation_required
Revert a relatively recent change that set vmx->fail if the vCPU is in L2
and emulation_required is true, as that behavior is completely bogus.
Setting vmx->fail and synthesizing a VM-Exit is contradictory and wrong:
(a) it's impossible to have both a VM-Fail and VM-Exit
(b) vmcs.EXIT_REASON is not modified on VM-Fail
(c) emulation_required refers to guest state and guest state checks are
always VM-Exits, not VM-Fails.
For KVM specifically, emulation_required is handled before nested exits
in __vmx_handle_exit(), thus setting vmx->fail has no immediate effect,
i.e. KVM calls into handle_invalid_guest_state() and vmx->fail is ignored.
Setting vmx->fail can ultimately result in a WARN in nested_vmx_vmexit()
firing when tearing down the VM as KVM never expects vmx->fail to be set
when L2 is active, KVM always reflects those errors into L1.
Andrew Jones [Tue, 14 Dec 2021 15:18:42 +0000 (16:18 +0100)]
selftests: KVM: Fix non-x86 compiling
Attempting to compile on a non-x86 architecture fails with
include/kvm_util.h: In function ‘vm_compute_max_gfn’:
include/kvm_util.h:79:21: error: dereferencing pointer to incomplete type ‘struct kvm_vm’
return ((1ULL << vm->pa_bits) >> vm->page_shift) - 1;
^~
This is because the declaration of struct kvm_vm is in
lib/kvm_util_internal.h as an effort to make it private to
the test lib code. We can still provide arch specific functions,
though, by making the generic function symbols weak. Do that to
fix the compile error.
Fixes: c8cc43c1eae2 ("selftests: KVM: avoid failures due to reserved HyperTransport region") Cc: stable@vger.kernel.org Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20211214151842.848314-1-drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Marc Orr [Thu, 9 Dec 2021 15:52:57 +0000 (07:52 -0800)]
KVM: x86: Always set kvm_run->if_flag
The kvm_run struct's if_flag is a part of the userspace/kernel API. The
SEV-ES patches failed to set this flag because it's no longer needed by
QEMU (according to the comment in the source code). However, other
hypervisors may make use of this flag. Therefore, set the flag for
guests with encrypted registers (i.e., with guest_state_protected set).
Fixes: f1c6366e3043 ("KVM: SVM: Add required changes to support intercepts under SEV-ES") Signed-off-by: Marc Orr <marcorr@google.com>
Message-Id: <20211209155257.128747-1-marcorr@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Sean Christopherson [Tue, 14 Dec 2021 03:35:28 +0000 (03:35 +0000)]
KVM: x86/mmu: Don't advance iterator after restart due to yielding
After dropping mmu_lock in the TDP MMU, restart the iterator during
tdp_iter_next() and do not advance the iterator. Advancing the iterator
results in skipping the top-level SPTE and all its children, which is
fatal if any of the skipped SPTEs were not visited before yielding.
When zapping all SPTEs, i.e. when min_level == root_level, restarting the
iter and then invoking tdp_iter_next() is always fatal if the current gfn
has as a valid SPTE, as advancing the iterator results in try_step_side()
skipping the current gfn, which wasn't visited before yielding.
Sprinkle WARNs on iter->yielded being true in various helpers that are
often used in conjunction with yielding, and tag the helper with
__must_check to reduce the probabily of improper usage.
Failing to zap a top-level SPTE manifests in one of two ways. If a valid
SPTE is skipped by both kvm_tdp_mmu_zap_all() and kvm_tdp_mmu_put_root(),
the shadow page will be leaked and KVM will WARN accordingly.
If kvm_tdp_mmu_zap_all() skips a gfn/SPTE but that SPTE is then zapped by
kvm_tdp_mmu_put_root(), KVM triggers a use-after-free in the form of
marking a struct page as dirty/accessed after it has been put back on the
free list. This directly triggers a WARN due to encountering a page with
page_count() == 0, but it can also lead to data corruption and additional
errors in the kernel.
Note, the underlying bug existed even before commit 1af4a96025b3 ("KVM:
x86/mmu: Yield in TDU MMU iter even if no SPTES changed") moved calls to
tdp_mmu_iter_cond_resched() to the beginning of loops, as KVM could still
incorrectly advance past a top-level entry when yielding on a lower-level
entry. But with respect to leaking shadow pages, the bug was introduced
by yielding before processing the current gfn.
Alternatively, tdp_mmu_iter_cond_resched() could simply fall through, or
callers could jump to their "retry" label. The downside of that approach
is that tdp_mmu_iter_cond_resched() _must_ be called before anything else
in the loop, and there's no easy way to enfornce that requirement.
Ideally, KVM would handling the cond_resched() fully within the iterator
macro (the code is actually quite clean) and avoid this entire class of
bugs, but that is extremely difficult do while also supporting yielding
after tdp_mmu_set_spte_atomic() fails. Yielding after failing to set a
SPTE is very desirable as the "owner" of the REMOVED_SPTE isn't strictly
bounded, e.g. if it's zapping a high-level shadow page, the REMOVED_SPTE
may block operations on the SPTE for a significant amount of time.
Fixes: faaf05b00aec ("kvm: x86/mmu: Support zapping SPTEs in the TDP MMU") Fixes: 1af4a96025b3 ("KVM: x86/mmu: Yield in TDU MMU iter even if no SPTES changed") Reported-by: Ignat Korchagin <ignat@cloudflare.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211214033528.123268-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Martin Blumenstingl [Sun, 19 Dec 2021 15:34:41 +0000 (16:34 +0100)]
mmc: meson-mx-sdhc: Set MANUAL_STOP for multi-block SDIO commands
The vendor driver implements special handling for multi-block
SD_IO_RW_EXTENDED (and SD_IO_RW_DIRECT) commands which have data
attached to them. It sets the MANUAL_STOP bit in the MESON_SDHC_MISC
register for these commands. In all other cases this bit is cleared.
Here we omit SD_IO_RW_DIRECT since that command never has any data
attached to it.
This fixes SDIO wifi using the brcmfmac driver which reported the
following error without this change on a Netxeon S82 board using a
Meson8 (S802) SoC:
brcmf_fw_alloc_request: using brcm/brcmfmac43362-sdio for chip
BCM43362/1
brcmf_sdiod_ramrw: membytes transfer failed
brcmf_sdio_download_code_file: error -110 on writing 219557 membytes
at 0x00000000
brcmf_sdio_download_firmware: dongle image file download failed
And with this change:
brcmf_fw_alloc_request: using brcm/brcmfmac43362-sdio for chip
BCM43362/1
brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may
have limited channels available
brcmf_c_preinit_dcmds: Firmware: BCM43362/1 wl0: Apr 22 2013 14:50:00
version 5.90.195.89.6 FWID 01-b30a427d
Fixes: e4bf1b0970ef96 ("mmc: host: meson-mx-sdhc: new driver for the Amlogic Meson SDHC host") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211219153442.463863-2-martin.blumenstingl@googlemail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Ulf Hansson [Fri, 3 Dec 2021 14:15:54 +0000 (15:15 +0100)]
mmc: core: Disable card detect during shutdown
It's seems prone to problems by allowing card detect and its corresponding
mmc_rescan() work to run, during platform shutdown. For example, we may end
up turning off the power while initializing a card, which potentially could
damage it.
To avoid this scenario, let's add ->shutdown_pre() callback for the mmc host
class device and then turn of the card detect from there.
Wei Wang [Fri, 17 Dec 2021 12:49:34 +0000 (07:49 -0500)]
KVM: x86: remove PMU FIXED_CTR3 from msrs_to_save_all
The fixed counter 3 is used for the Topdown metrics, which hasn't been
enabled for KVM guests. Userspace accessing to it will fail as it's not
included in get_fixed_pmc(). This breaks KVM selftests on ICX+ machines,
which have this counter.
To reproduce it on ICX+ machines, ./state_test reports:
==== Test Assertion Failure ====
lib/x86_64/processor.c:1078: r == nmsrs
pid=4564 tid=4564 - Argument list too long
1 0x000000000040b1b9: vcpu_save_state at processor.c:1077
2 0x0000000000402478: main at state_test.c:209 (discriminator 6)
3 0x00007fbe21ed5f92: ?? ??:0
4 0x000000000040264d: _start at ??:?
Unexpected result from KVM_GET_MSRS, r: 17 (failed MSR was 0x30c)
With this patch, it works well.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Message-Id: <20211217124934.32893-1-wei.w.wang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Sun, 19 Dec 2021 20:44:03 +0000 (12:44 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Two small fixes, one of which was being worked around in selftests"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Retry page fault if MMU reload is pending and root has no sp
KVM: selftests: vmx_pmu_msrs_test: Drop tests mangling guest visible CPUIDs
KVM: x86: Drop guest CPUID check for host initiated writes to MSR_IA32_PERF_CAPABILITIES
Linus Torvalds [Sun, 19 Dec 2021 20:38:53 +0000 (12:38 -0800)]
Merge tag 'block-5.16-2021-12-19' of git://git.kernel.dk/linux-block
Pull block revert from Jens Axboe:
"It turns out that the fix for not hammering on the delayed work timer
too much caused a performance regression for BFQ, so let's revert the
change for now.
I've got some ideas on how to fix it appropriately, but they should
wait for 5.17"
* tag 'block-5.16-2021-12-19' of git://git.kernel.dk/linux-block:
Revert "block: reduce kblockd_mod_delayed_work_on() CPU consumption"
Linus Torvalds [Sun, 19 Dec 2021 20:28:46 +0000 (12:28 -0800)]
Merge tag 'irq_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Clear the PCI_MSIX_FLAGS_MASKALL bit too on the error path so that it
is restored to its reset state
- Mask MSI-X vectors late on the init path in order to handle
out-of-spec Marvell NVME devices which apparently look at the MSI-X
mask even when MSI-X is disabled
* tag 'irq_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Clear PCI_MSIX_FLAGS_MASKALL on error
PCI/MSI: Mask MSI-X vectors only on success
Linus Torvalds [Sun, 19 Dec 2021 20:23:18 +0000 (12:23 -0800)]
Merge tag 'timers_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Make sure the CLOCK_REALTIME to CLOCK_MONOTONIC offset is never
positive
* tag 'timers_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Really make sure wall_to_monotonic isn't positive
Linus Torvalds [Sun, 19 Dec 2021 20:17:26 +0000 (12:17 -0800)]
Merge tag 'locking_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Fix the rtmutex condition checking when the optimistic spinning of a
waiter needs to be terminated
* tag 'locking_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Fix incorrect condition in rtmutex_spin_on_owner()
Linus Torvalds [Sun, 19 Dec 2021 19:31:14 +0000 (11:31 -0800)]
Merge tag 'powerpc-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fix a recently introduced oops at boot on 85xx in some configurations.
Fix crashes when loading some livepatch modules with
STRICT_MODULE_RWX.
Thanks to Joe Lawrence, Russell Currey, and Xiaoming Ni"
* tag 'powerpc-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/module_64: Fix livepatching for RO modules
powerpc/85xx: Fix oops when CONFIG_FSL_PMC=n
Linus Torvalds [Sun, 19 Dec 2021 19:23:02 +0000 (11:23 -0800)]
Merge tag '5.16-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Two cifs/smb3 fixes, one fscache related, and one mount parsing
related for stable"
* tag '5.16-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: sanitize multiple delimiters in prepath
cifs: ignore resource_id while getting fscache super cookie
Sean Christopherson [Thu, 9 Dec 2021 06:05:46 +0000 (06:05 +0000)]
KVM: x86: Retry page fault if MMU reload is pending and root has no sp
Play nice with a NULL shadow page when checking for an obsolete root in
the page fault handler by flagging the page fault as stale if there's no
shadow page associated with the root and KVM_REQ_MMU_RELOAD is pending.
Invalidating memslots, which is the only case where _all_ roots need to
be reloaded, requests all vCPUs to reload their MMUs while holding
mmu_lock for lock.
The "special" roots, e.g. pae_root when KVM uses PAE paging, are not
backed by a shadow page. Running with TDP disabled or with nested NPT
explodes spectaculary due to dereferencing a NULL shadow page pointer.
Skip the KVM_REQ_MMU_RELOAD check if there is a valid shadow page for the
root. Zapping shadow pages in response to guest activity, e.g. when the
guest frees a PGD, can trigger KVM_REQ_MMU_RELOAD even if the current
vCPU isn't using the affected root. I.e. KVM_REQ_MMU_RELOAD can be seen
with a completely valid root shadow page. This is a bit of a moot point
as KVM currently unloads all roots on KVM_REQ_MMU_RELOAD, but that will
be cleaned up in the future.
Fixes: a955cad84cda ("KVM: x86/mmu: Retry page fault if root is invalidated by memslot update") Cc: stable@vger.kernel.org Cc: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211209060552.2956723-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Thu, 16 Dec 2021 16:52:12 +0000 (17:52 +0100)]
KVM: selftests: vmx_pmu_msrs_test: Drop tests mangling guest visible CPUIDs
Host initiated writes to MSR_IA32_PERF_CAPABILITIES should not depend
on guest visible CPUIDs and (incorrect) KVM logic implementing it is
about to change. Also, KVM_SET_CPUID{,2} after KVM_RUN is now forbidden
and causes test to fail.
Reported-by: kernel test robot <oliver.sang@intel.com> Fixes: feb627e8d6f6 ("KVM: x86: Forbid KVM_SET_CPUID{,2} after KVM_RUN") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211216165213.338923-2-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Thu, 16 Dec 2021 16:52:13 +0000 (17:52 +0100)]
KVM: x86: Drop guest CPUID check for host initiated writes to MSR_IA32_PERF_CAPABILITIES
The ability to write to MSR_IA32_PERF_CAPABILITIES from the host should
not depend on guest visible CPUID entries, even if just to allow
creating/restoring guest MSRs and CPUIDs in any sequence.
Fixes: 27461da31089 ("KVM: x86/pmu: Support full width counting") Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211216165213.338923-3-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Alex and the kernel test robot report that this causes a significant
performance regression with BFQ. I can reproduce that result, so let's
revert this one as we're close to -rc6 and we there's no point in trying
to rush a fix.
Chuck Lever [Thu, 16 Dec 2021 16:12:11 +0000 (11:12 -0500)]
NFSD: Fix READDIR buffer overflow
If a client sends a READDIR count argument that is too small (say,
zero), then the buffer size calculation in the new init_dirlist
helper functions results in an underflow, allowing the XDR stream
functions to write beyond the actual buffer.
This calculation has always been suspect. NFSD has never sanity-
checked the READDIR count argument, but the old entry encoders
managed the problem correctly.
With the commits below, entry encoding changed, exposing the
underflow to the pointer arithmetic in xdr_reserve_space().
Modern NFS clients attempt to retrieve as much data as possible
for each READDIR request. Also, we have no unit tests that
exercise the behavior of READDIR at the lower bound of @count
values. Thus this case was missed during testing.
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Fixes: f5dcccd647da ("NFSD: Update the NFSv2 READDIR entry encoder to use struct xdr_stream") Fixes: 7f87fc2d34d4 ("NFSD: Update NFSv3 READDIR entry encoders to use struct xdr_stream") Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Linus Torvalds [Sat, 18 Dec 2021 21:23:55 +0000 (13:23 -0800)]
Merge tag 'tty-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are two small tty/serial fixes for 5.16-rc6. They include:
- n_hdlc fix for syzbot reported problem that you were previously
copied on.
- 8250_fintek driver fix that resolved a console problem by removing
a previous change.
Both have been in linux-next with no reported issues"
* tag 'tty-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_fintek: Fix garbled text for console
tty: n_hdlc: make n_hdlc_tty_wakeup() asynchronous
Linus Torvalds [Sat, 18 Dec 2021 21:16:43 +0000 (13:16 -0800)]
Merge tag 'usb-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for reported problems.
They include:
- dwc2 driver fixes
- xhci driver fixes
- cdnsp driver fixes
- typec driver fix
- gadget u_ether driver fix
- new quirk additions
- usb gadget endpoint calculation fix
- usb serial new device ids
- revert of a xhci-dbg change that broke early debug booting
All changes, except for the revert, have been in linux-next with no
reported problems. The revert was from yesterday, and it was reported
by the developers affected that it resolved their problem"
* tag 'usb-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
Revert "usb: early: convert to readl_poll_timeout_atomic()"
usb: typec: tcpm: fix tcpm unregister port but leave a pending timer
usb: cdnsp: Fix lack of spin_lock_irqsave/spin_lock_restore
USB: NO_LPM quirk Lenovo USB-C to Ethernet Adapher(RTL8153-04)
usb: xhci: Extend support for runtime power management for AMD's Yellow carp.
usb: dwc2: fix STM ID/VBUS detection startup delay in dwc2_driver_probe
USB: gadget: bRequestType is a bitfield, not a enum
USB: serial: option: add Telit FN990 compositions
USB: serial: cp210x: fix CP2105 GPIO registration
usb: cdnsp: Fix incorrect status for control request
usb: cdnsp: Fix issue in cdnsp_log_ep trace event
usb: cdnsp: Fix incorrect calling of cdnsp_died function
usb: xhci-mtk: fix list_del warning when enable list debug
usb: gadget: u_ether: fix race in setting MAC address in setup phase
Linus Torvalds [Sat, 18 Dec 2021 19:53:14 +0000 (11:53 -0800)]
Merge tag 'perf-tools-fixes-for-v5.16-2021-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix segfaults in 'perf inject' related to usage of unopened files
- The return value of hashmap__new() should be checked using IS_ERR()
* tag 'perf-tools-fixes-for-v5.16-2021-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf inject: Fix segfault due to perf_data__fd() without open
perf inject: Fix segfault due to close without open
perf expr: Fix missing check for return value of hashmap__new()
Adrian Hunter [Mon, 13 Dec 2021 08:48:29 +0000 (10:48 +0200)]
perf inject: Fix segfault due to perf_data__fd() without open
The fixed commit attempts to get the output file descriptor even if the
file was never opened e.g.
$ perf record uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ]
$ perf inject -i perf.data --vm-time-correlation=dry-run
Segmentation fault (core dumped)
$ gdb --quiet perf
Reading symbols from perf...
(gdb) r inject -i perf.data --vm-time-correlation=dry-run
Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Program received signal SIGSEGV, Segmentation fault.
__GI___fileno (fp=0x0) at fileno.c:35
35 fileno.c: No such file or directory.
(gdb) bt
#0 __GI___fileno (fp=0x0) at fileno.c:35
#1 0x00005621e48dd987 in perf_data__fd (data=0x7fff4c68bd08) at util/data.h:72
#2 perf_data__fd (data=0x7fff4c68bd08) at util/data.h:69
#3 cmd_inject (argc=<optimized out>, argv=0x7fff4c69c1f0) at builtin-inject.c:1017
#4 0x00005621e4936783 in run_builtin (p=0x5621e4ee6878 <commands+600>, argc=4, argv=0x7fff4c69c1f0) at perf.c:313
#5 0x00005621e4897d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365
#6 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409
#7 main (argc=4, argv=0x7fff4c69c1f0) at perf.c:539
(gdb)
Fixes: 0ae03893623dd1dd ("perf tools: Pass a fd to perf_file_header__read_pipe()") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20211213084829.114772-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Mon, 13 Dec 2021 08:48:28 +0000 (10:48 +0200)]
perf inject: Fix segfault due to close without open
The fixed commit attempts to close inject.output even if it was never
opened e.g.
$ perf record uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ]
$ perf inject -i perf.data --vm-time-correlation=dry-run
Segmentation fault (core dumped)
$ gdb --quiet perf
Reading symbols from perf...
(gdb) r inject -i perf.data --vm-time-correlation=dry-run
Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Program received signal SIGSEGV, Segmentation fault.
0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48
48 iofclose.c: No such file or directory.
(gdb) bt
#0 0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48
#1 0x0000557fc7b74f92 in perf_data__close (data=data@entry=0x7ffcdafa6578) at util/data.c:376
#2 0x0000557fc7a6b807 in cmd_inject (argc=<optimized out>, argv=<optimized out>) at builtin-inject.c:1085
#3 0x0000557fc7ac4783 in run_builtin (p=0x557fc8074878 <commands+600>, argc=4, argv=0x7ffcdafb6a60) at perf.c:313
#4 0x0000557fc7a25d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365
#5 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409
#6 main (argc=4, argv=0x7ffcdafb6a60) at perf.c:539
(gdb)
Fixes: 02e6246f5364d526 ("perf inject: Close inject.output on exit") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20211213084829.114772-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Miaoqian Lin [Sun, 12 Dec 2021 06:25:02 +0000 (06:25 +0000)]
perf expr: Fix missing check for return value of hashmap__new()
The hashmap__new() function may return ERR_PTR(-ENOMEM) when malloc()
fails, add IS_ERR() checking for ctx->ids.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20211212062504.25841-1-linmq006@gmail.com
[ s/kfree()/free()/ and add missing linux/err.h include ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Zqiang [Fri, 17 Dec 2021 07:42:07 +0000 (15:42 +0800)]
locking/rtmutex: Fix incorrect condition in rtmutex_spin_on_owner()
Optimistic spinning needs to be terminated when the spinning waiter is not
longer the top waiter on the lock, but the condition is negated. It
terminates if the waiter is the top waiter, which is defeating the whole
purpose.
Thiago Rafael Becker [Fri, 17 Dec 2021 18:20:22 +0000 (15:20 -0300)]
cifs: sanitize multiple delimiters in prepath
mount.cifs can pass a device with multiple delimiters in it. This will
cause rename(2) to fail with ENOENT.
V2:
- Make sanitize_path more readable.
- Fix multiple delimiters between UNC and prepath.
- Avoid a memory leak if a bad user starts putting a lot of delimiters
in the path on purpose.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2031200 Fixes: 24e0a1eff9e2 ("cifs: switch to new mount api") Cc: stable@vger.kernel.org # 5.11+ Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Thiago Rafael Becker <trbecker@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Shyam Prasad N [Wed, 8 Dec 2021 16:33:19 +0000 (16:33 +0000)]
cifs: ignore resource_id while getting fscache super cookie
We have a cyclic dependency between fscache super cookie
and root inode cookie. The super cookie relies on
tcon->resource_id, which gets populated from the root inode
number. However, fetching the root inode initializes inode
cookie as a child of super cookie, which is yet to be populated.
resource_id is only used as auxdata to check the validity of
super cookie. We can completely avoid setting resource_id to
remove the circular dependency. Since vol creation time and
vol serial numbers are used for auxdata, we should be fine.
Additionally, there will be auxiliary data check for each
inode cookie as well.
Fixes: 5bf91ef03d98 ("cifs: wait for tcon resource_id before getting fscache super") CC: David Howells <dhowells@redhat.com> Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Yu Liao [Mon, 13 Dec 2021 13:57:27 +0000 (21:57 +0800)]
timekeeping: Really make sure wall_to_monotonic isn't positive
Even after commit e1d7ba873555 ("time: Always make sure wall_to_monotonic
isn't positive") it is still possible to make wall_to_monotonic positive
by running the following code:
The reason is that the second parameter of timespec64_compare(), ts_delta,
may be unnormalized because the delta is calculated with an open coded
substraction which causes the comparison of tv_sec to yield the wrong
result:
Linus Torvalds [Fri, 17 Dec 2021 21:50:58 +0000 (13:50 -0800)]
Merge tag 'for-5.16-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes, almost all error handling one-liners and for stable.
- regression fix in directory logging items
- regression fix of extent buffer status bits handling after an error
- fix memory leak in error handling path in tree-log
- fix freeing invalid anon device number when handling errors during
subvolume creation
- fix warning when freeing leaf after subvolume creation failure
- fix missing blkdev put in device scan error handling
- fix invalid delayed ref after subvolume creation failure"
* tag 'for-5.16-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix missing blkdev_put() call in btrfs_scan_one_device()
btrfs: fix warning when freeing leaf after subvolume creation failure
btrfs: fix invalid delayed ref after subvolume creation failure
btrfs: check WRITE_ERR when trying to read an extent buffer
btrfs: fix missing last dir item offset update when logging directory
btrfs: fix double free of anon_dev after failure to create subvolume
btrfs: fix memory leak in __add_inode_ref()
Thadeu Lima de Souza Cascardo [Fri, 17 Dec 2021 15:44:09 +0000 (12:44 -0300)]
ipmi: bail out if init_srcu_struct fails
In case, init_srcu_struct fails (because of memory allocation failure), we
might proceed with the driver initialization despite srcu_struct not being
entirely initialized.
Fixes: 913a89f009d9 ("ipmi: Don't initialize anything in the core until something uses it") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Cc: Corey Minyard <cminyard@mvista.com> Cc: stable@vger.kernel.org
Message-Id: <20211217154410.1228673-1-cascardo@canonical.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
Linus Torvalds [Fri, 17 Dec 2021 20:03:14 +0000 (12:03 -0800)]
Merge tag 'selinux-pr-20211217' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"Another small SELinux fix for v5.16 to ensure that we don't block on
memory allocations while holding a spinlock.
This passes all our tests without problem"
* tag 'selinux-pr-20211217' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix sleeping function called from invalid context
Linus Torvalds [Fri, 17 Dec 2021 19:55:35 +0000 (11:55 -0800)]
Merge tag 'riscv-for-linus-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A handful of DT updates for the SiFive HiFive Unmatched, that fix the
regulator handling. These should stop some warning spew.
- A pair of fixes for both the SiFive Hifive Unleashed and Unmatched,
that correctly hook up the MMC card detect signal.
* tag 'riscv-for-linus-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: dts: sifive unmatched: Link the tmp451 with its power supply
riscv: dts: sifive unmatched: Fix regulator for board rev3
riscv: dts: sifive unmatched: Expose the PMIC sub-functions
riscv: dts: sifive unmatched: Expose the board ID eeprom
riscv: dts: sifive unmatched: Name gpio lines
riscv: dts: unmatched: Add gpio card detect to mmc-spi-slot
riscv: dts: unleashed: Add gpio card detect to mmc-spi-slot
Linus Torvalds [Fri, 17 Dec 2021 19:46:07 +0000 (11:46 -0800)]
Merge tag 'block-5.16-2021-12-17' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Fix for hammering on the delayed run queue timer (me)
- bcache regression fix for this merge window (Lin)
- Fix a divide-by-zero in the blk-iocost code (Tejun)
* tag 'block-5.16-2021-12-17' of git://git.kernel.dk/linux-block:
bcache: fix NULL pointer reference in cached_dev_detach_finish
block: reduce kblockd_mod_delayed_work_on() CPU consumption
iocost: Fix divide-by-zero on donation from low hweight cgroup
Linus Torvalds [Fri, 17 Dec 2021 19:07:13 +0000 (11:07 -0800)]
Merge tag 'drm-fixes-2021-12-17-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Mostly amdgpu fixes this week scattered around the driver, otherwise
one i915, one ast, one simpledrm. There is a revert in the fb-helper
for places userspace was using a string that we tried to change.
i915:
- Fix a bound check in the DMC fw load.
ast:
- NULL ptr deref fix
simpledrm:
- pixel clock units fix
fb-helper:
- userspace regression revert
amdgpu:
- Fix RLC register offset
- GMC fix
- Properly cache SMU FW version on Yellow Carp
- Fix missing callback on DCN3.1
- Reset DMCUB before HW init
- Fix for GMC powergating on PCO
- Fix a possible memory leak in GPU metrics table handling on RN"
* tag 'drm-fixes-2021-12-17-1' of git://anongit.freedesktop.org/drm/drm:
drm/amd/pm: fix a potential gpu_metrics_table memory leak
drm/amdgpu: correct the wrong cached state for GMC on PICASSO
drm/amd/display: Reset DMCUB before HW init
drm/amd/display: Set exit_optimized_pwr_state for DCN31
drm/amd/pm: fix reading SMU FW version from amdgpu_firmware_info on YC
drm/amdgpu: don't override default ECO_BITs setting
drm/amdgpu: correct register access for RLC_JUMP_TABLE_RESTORE
drm/i915/display: Fix an unsigned subtraction which can never be negative.
drm/ast: potential dereference of null pointer
drm: simpledrm: fix wrong unit with pixel clock
Revert "drm/fb-helper: improve DRM fbdev emulation device names"
Rafael J. Wysocki [Thu, 16 Dec 2021 19:30:18 +0000 (20:30 +0100)]
PM: sleep: Fix error handling in dpm_prepare()
Commit 2aa36604e824 ("PM: sleep: Avoid calling put_device() under
dpm_list_mtx") forgot to update the while () loop termination
condition to also break the loop if error is nonzero, which
causes the loop to become infinite if device_prepare() returns
an error for one device.
Add the missing !error check.
Fixes: 2aa36604e824 ("PM: sleep: Avoid calling put_device() under dpm_list_mtx") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reported-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: All applicable <stable@vger.kernel.org>
This change causes boot lockups when using "arlyprintk=xdbc" because
ktime can not be used at this point in time in the boot process. Also,
it is not needed for very small delays like this.
Arnd Bergmann [Fri, 17 Dec 2021 14:51:15 +0000 (15:51 +0100)]
Merge tag 'fixes-for-v5.16' of https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
TEE and OP-TEE fixes for v5.16
- Fixes a race when a tee_shm reaches reference count 0 and is about to
be teared down
- Fixes an incorrect page free bug in an error path of the OP-TEE shared
memory pool handling
- Suppresses a false positive kmemleak report when allocating driver
private shared memory buffers for OP-TEE
* tag 'fixes-for-v5.16' of https://git.linaro.org/people/jens.wiklander/linux-tee:
optee: Suppress false positive kmemleak report in optee_handle_rpc()
tee: optee: Fix incorrect page free bug
tee: handle lookup of shm with reference count 0
Vincent Pelletier [Tue, 16 Nov 2021 23:57:42 +0000 (23:57 +0000)]
riscv: dts: sifive unmatched: Link the tmp451 with its power supply
Fixes the following probe warning:
lm90 0-004c: Looking up vcc-supply from device tree
lm90 0-004c: Looking up vcc-supply property in node /soc/i2c@10030000/temperature-sensor@4c failed
lm90 0-004c: supply vcc not found, using dummy regulator
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Vincent Pelletier [Tue, 16 Nov 2021 23:57:41 +0000 (23:57 +0000)]
riscv: dts: sifive unmatched: Fix regulator for board rev3
The existing values are rejected by the da9063 regulator driver, as they
are unachievable with the declared chip setup (non-merged vcore and bmem
are unable to provide the declared curent).
Fix voltages to match rev3 schematics, which also matches their boot-up
configuration within the chip's available precision.
Declare bcore1/bcore2 and bmem/bio as merged.
Set ldo09 and ldo10 as always-on as their consumers are not declared but
exist.
Drop ldo current limits as there is no current limit feature for these
regulators in the DA9063. Fixes warnings like:
DA9063_LDO3: Operation of current configuration missing
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Vincent Pelletier [Tue, 16 Nov 2021 23:57:38 +0000 (23:57 +0000)]
riscv: dts: sifive unmatched: Expose the board ID eeprom
Mark it as read-only as it is factory-programmed with identifying
information, and no executable nor configuration:
- eth MAC address
- board model (PCB version, BoM version)
- board serial number
Accidental modification would cause misidentification which could brick
the board, so marking read-only seem like both a safe and non-constraining
choice.
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Dave Airlie [Fri, 17 Dec 2021 05:01:00 +0000 (15:01 +1000)]
Merge tag 'amd-drm-fixes-5.16-2021-12-15' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.16-2021-12-15:
amdgpu:
- Fix RLC register offset
- GMC fix
- Properly cache SMU FW version on Yellow Carp
- Fix missing callback on DCN3.1
- Reset DMCUB before HW init
- Fix for GMC powergating on PCO
- Fix a possible memory leak in GPU metrics table handling on RN
Giovanni Cabiddu [Wed, 17 Nov 2021 14:30:34 +0000 (14:30 +0000)]
crypto: qat - do not handle PFVF sources for qat_4xxx
The QAT driver does not have support for PFVF interrupts for GEN4
devices, therefore report the vf2pf sources as 0.
This prevents a NULL pointer dereference in the function
adf_msix_isr_ae() if the device triggers a spurious interrupt.
Fixes: 993161d36ab5 ("crypto: qat - fix handling of VF to PF interrupts") Reported-by: Adam Guerin <adam.guerin@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
George Kennedy [Tue, 14 Dec 2021 14:45:10 +0000 (09:45 -0500)]
libata: if T_LENGTH is zero, dma direction should be DMA_NONE
Avoid data corruption by rejecting pass-through commands where
T_LENGTH is zero (No data is transferred) and the dma direction
is not DMA_NONE.
Cc: <stable@vger.kernel.org> Reported-by: syzkaller<syzkaller@googlegroups.com> Signed-off-by: George Kennedy<george.kennedy@oracle.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
projects / users / jedix / linux-maple.git / log