Documentation/gpu: Remove ':export:' option from DCN documentation

This commit reduces, but does not fix, all the occurrences and some of
the documentation warnings related to the 'no structured comments.' This
was caused by the wrong use of the ':export:' option in the DCN
kernel-doc, so this commit drops the usage of those options.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move DIO documentation to the right place

When building the kernel-doc, it complains with the below warning:

./drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio.h:1: warning: no structured comments found
./drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio.h:1: warning: no structured comments found

This warning was caused by the wrong use of the ':export:' and the lack
of function documentation in the file pointed under the ':internal:'.
This commit addresses those issues by relocating the overview
documentation to the correct C file, removing the ':export:' options,
and adding two simple kernel-doc to ensure that ':internal:' does not
have any warning.

Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/dri-devel/20240715085918.68f5ecc9@canb.auug.org.au/
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/swsmu: enable Pstates profile levels for SMU v14.0.4

Enables following UMD stable Pstates profile levels
of power_dpm_force_performance_level for SMU v14.0.4.

    - profile_peak
    - profile_min_mclk
    - profile_min_sclk
    - profile_standard

Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: early return if disabling DPMS for GFX IP v11.5.2

This was intended to add support for GFX IP v11.5.2, but it needs
to be applied to all GFX11 and subsequent APUs. Therefore the code
should be revised to accommodate this.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add mutex to protect ras shared memory

Add mutex to protect ras shared memory.

v2:
  Add TA_RAS_COMMAND__TRIGGER_ERROR command call
  status check.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add function banner for idle_workqueue

[Why]
htmldocs warning:
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h: warning:
Function parameter or struct member 'idle_workqueue' not described in
'amdgpu_display_manager'.

[How]
Add comment section for idle_workqueue with param description.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/dri-devel/20240715090211.736a9b4d@canb.auug.org.au/
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add doc entry for program_3dlut_size

Fixes the warning:

Function parameter or struct member 'program_3dlut_size' not described in
'mpc_funcs'

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/dri-devel/20240715090445.7e9387ec@canb.auug.org.au/
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: not pause dpg for unified queue

For unified queue, DPG pause for encoding is done inside VCN firmware,
so there is no need to pause dpg based on ring type in kernel.

For VCN3 and below, pausing DPG for encoding in kernel is still needed.

v2: add more comments
v3: update commit message

Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: identify unified queue in sw init

Determine whether VCN using unified queue in sw_init, instead of calling
functions later on.

v2: fix coding style

Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix doc entry for bb_from_dmub

Fixes the warning:

Function parameter or struct member 'bb_from_dmub' not described in 'amdgpu_display_manager'

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Bump KMS_DRIVER_MINOR version

Increase the KMS minor version to indicate GFX12 DCC support since this
contains a major change in how DCC is managed across IPs like GFX, DCN
etc. This will be used mainly by userspace like Mesa to figure out
DCC support on GFX12 hardware.

v2: fix version number (Alex)

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/mes12: add missing opcode string

Fixes the indexing of the string array.

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/mes11: update opcode strings

Add new packet.

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: Reset freesync config before update new state"

This change caused PSR SU panels to not read from their remote fb,
preventing us from entering self-refresh. It is a regression.

This reverts commit eb6dfbb7a9c67c7d9bcdb9f9b9131270e2144e3d.

Signed-off-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dc1000bf463d1d89f66d6b5369cf76603f32c4d3)

drm/amdgpu: remove exp hw support check for gfx12

Enable it by default.

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: timely save bad pages to eeprom after gpu ras reset is completed

The problem case is as follows:
1. GPU A triggers a gpu ras reset, and GPU A drives
   GPU B to also perform a gpu ras reset.
2. After gpu B ras reset started, gpu B queried a DE
   data. Since the DE data was queried in the ras reset
   thread instead of the page retirement thread, bad
   page retirement work would not be triggered. Then
   even if all gpu resets are completed, the bad pages
   will be cached in RAM until GPU B's bad page retirement
   work is triggered again and then saved to eeprom.

This patch can save the bad pages to eeprom in time after gpu
ras reset is completed.

v2:
  1. Add the above description to code comments.
  2. Reuse existing function.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: flush all cached ras bad pages to eeprom

Before uninstalling gpu driver, flush all cached ras
bad pages to eeprom.

v2:
  Put the same code into a function and reuse the function.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: select compute ME engines dynamically

GFX ME right now is one but this could change in
future SOC's. Use no of ME for GFX as start point
for ME for compute for GFX12.

Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Allow display DCC for DCN401

To enable mesa to use display dcc, DM should expose them in the
supported modifiers. Add the best (most efficient) modifiers first.

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: select compute ME engines dynamically

GFX ME right now is one but this could change in
future SOC's. Use no of ME for GFX as start point
for ME for compute for GFX11.

Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/job: Replace DRM_INFO/ERROR logging

Use the dev_info/err variants so we get per device logging
in multi-GPU cases.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: select compute ME engines dynamically

GFX ME right now is one but this could change in
future SOC's. Use no of ME for GFX as start point
for ME for compute for GFX10.

Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Ignore initial value in smu response register

Why:
If the reg mmMP1_SMN_C2PMSG_90 is being written to during amdgpu driver
load or driver unload, subsequent amdgpu driver load will fail at
smu_hw_init. The default of mmMP1_SMN_C2PMSG_90 register at a clean
environment is 0x1 and if value differs from expected, amdgpu driver
load will fail.

How to fix:
Ignore the initial value in smu response register before the first smu
message is sent,if smc in SMU_FW_INIT state, just proceed further to
send the message. If register holds an unexpected value after smu message
was sent set, smc_state to SMU_FW_HANG state and no further smu messages
will be sent.

v2:
Set SMU_FW_INIT state at the start of smu hw_init/resume.
Check smc_fw_state before sending smu message if in hang state skip
sending message.
Set SMU_FW_HANG only in case unexpected value is detected

Signed-off-by: Danijel Slivka <danijel.slivka@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Initialize VF partition mode

For SOCs with GFX v9.4.3, a VF may have multiple compute partitions.
Fetch the partition information during init and initialize partition
nodes. There is no support to switch partition mode in VF mode, hence
disable the same.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: fix SDMA IRQ client ID <-> req mapping.

sdma has 2 instances in SRIOV cpx mode. Odd numbered VFs have
sdma0/sdma1 instances. Even numbered vfs have sdma2/sdma3. For
Even numbered vfs, the sdma2 & sdma3 (irq srouce id
CLIENTID_SDMA2 and CLIENTID_SDMA3) should map to irq seq 0 & 1.

Signed-off-by: Gavin Wan <Gavin.Wan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

MAINTAINERS: fix Xinhui's name

Switch to fist last for consistency.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Xinhui Pan <Xinhui.Pan@amd.com>

MAINTAINERS: update powerplay and swsmu

Evan is no longer maintaining powerplay and swsmu.
Add Kenneth Feng as his replacement.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Kenneth Feng <kenneth.feng@amd.com>

drm/amdgpu: set CP_HQD_PQ_DOORBELL_CONTROL.DOORBELL_MODE to 1

to avoid reading wrong WPTR from doorbell in sriov vf, set
CP_HQD_PQ_DOORBELL_CONTROL.DOORBELL_MODE to 1 to read WPTR from MQD.

Signed-off-by: Zhigang Luo <Zhigang.Luo@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Documentation/amdgpu: Clarify MI200 and MI300 entries

Add "Series" to MI200 and MI300 to clarify that they represent the
series of cards, and to more closely match the product information
materials. This also matches other entries in this list

Also correct a typo in the MI300 codename (Vangaram->Vanjaram)

Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add ras event state device attribute support

add amdgpu ras 'event_state' sysfs device attribute support

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/swsmu: enable more Pstates profile levels for SMU v14.0.0 and v14.0.1

V1:  This patch enables following UMD stable Pstates profile
levels for power_dpm_force_performance_level interface.

- profile_peak
- profile_min_mclk
- profile_min_sclk
- profile_standard

V2: Fix conflict with commit "drm/amd/pm: smu v14.0.4 reuse smu v14.0.0 dpmtable "

V3: Add VCLK1 and DCLK1 support for SMU V14.0.1
And avoid to set VCLK1 and DCLK1 for SMU v14.0.0

Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add ras POSION_CONSUMPTION event id support

add amdgpu ras POSION_CONSUMPTION event id support.

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Use mode1 reset for GFX v9.4.4

GFX v9.4.4 uses mode1 reset to handle poison consumption.

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add ras POSION_CREATION event id support

add amdgpu ras POSION_CREATION event id support.

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: refine amdgpu ras event id core code

v1:
- use unified event id to manage ras events
- add a new function amdgpu_ras_query_error_status_with_event() to accept
  event type as parameter.

v2:
add a warn log to show the location of function failure
when calling amdgpu_ras_mark_event(). (Tao Zhou)

v3:
change RAS_EVENT_TYPE_ISR to RAS_EVENT_TYPE_FATAL.

v4:
rename amdgpu_ras_get_recovery_event() to
amdgpu_ras_get_fatal_error_event().

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Solve mst monitors blank out problem after resume

[Why]
In dm resume, we firstly restore dc state and do the mst resume for topology
probing thereafter. If we change dpcd DP_MSTM_CTRL value after LT in mst reume,
it will cause light up problem on the hub.

[How]
Revert commit 202dc359adda ("drm/amd/display: Defer handling mst up request in resume").
And adjust the reason to trigger dc_link_detect by DETECT_REASON_RESUMEFROMS3S4.

Cc: stable@vger.kernel.org
Fixes: 202dc359adda ("drm/amd/display: Defer handling mst up request in resume")
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: reject gang submit on reserved VMIDs

A gang submit won't work if the VMID is reserved and we can't flush out
VM changes from multiple engines at the same time.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable dpg for vcn and jpeg on GC 11_5_2

DPG mode is enabled for vcn and jpeg on VCN v4_0_5

Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove redundant semicolons in RAS_EVENT_LOG

remove redundant semicolons in RAS_EVENT_LOG to avoid
code format check warning.

Fixes: b712d7c20133 ("drm/amdgpu: fix compiler 'side-effect' check issue for RAS_EVENT_LOG()")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: restore dcc bo tilling configs while moving

While moving buffer which has dcc tiling config, it is needed to restore
its original dcc tiling.

1. extend copy flag to cover tiling bits
2. add logic to restore original dcc tiling config

Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add gfx queue support for gfx12 ipdump

Add support of all the CP GFX queues for gfx12 ipdump
to be used by devcoredump.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add cp queue registers for gfx12 ipdump

Add gfx12 support of CP queue registers for all queues
to be used by devcoredump.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable redirection of irq's for IH v7.0

Enable redirection of irq for pagefaults for specific
clients to avoid overflow without dropping interrupts.

So here we redirect the interrupts to another IH ring
i.e ring1 where only these interrupts are processed.

Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm:amdgpu: enable IH ring1 for IH v7.0

We need IH ring1 for handling the pagefault
interrupts which over flow in default
ring for specific usecases.

Enable ring1 allows software to redirect
high interrupts to ring1 from default IH
ring.

Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Set no_hw_access when VF request full GPU fails

[Why]
If VF request full GPU access and the request failed,
the VF driver can get stuck accessing registers for an extended period during
the unload of KMS.

[How]
Set no_hw_access flag when VF request for full GPU access fails
This prevents further hardware access attempts, avoiding the prolonged
stuck state.

Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add print support for gfx12 ipdump

Add support of gfx12 ipdump print so devcoredump
could trigger it to dump the captured registers
in devcoredump.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add gfx12 register support in ipdump

Add general registers of gfx12 in ipdump for
devcoredump support.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update gfxhub client id for gfx12

update gfxhub client id for gfx12

Signed-off-by: Frank Min <Frank.Min@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: avoid to load smu firmware for APUs

Certain call paths still load the SMU firmware for APUs,
which needs to be skipped.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: sysfs node disable query error count during gpu reset

Sysfs node disable query error count during gpu reset.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'drm-msm-next-2024-07-04' of https://gitlab.freedesktop.org/drm/msm into drm-next

Updates for v6.11

Core:
- SM7150 support

DPU:
- SM7150 support
- Fix DSC support for DSI panels in video mode
- Fixed TE vsync source support for DSI command-mode panels
- Fix for devices without UBWC in the display controller (ie.
  QCM2290)

DSI:
- Remove unused register-writing wrappers
- Fix DSC support for panels in video mode
- Add support for parsing TE vsync source
- Add support for MSM8937 (28nm DSI PHY)

MDP5:
- Add support for MSM8937
- Fix configuration for MSM8953

GPU:
- Split giant device table into per-gen "hw catalog" similar to
  what is done on the display side of the driver
- Fix a702 UBWC mode
- Fix unused variably warnings
- GPU memory traces
- Add param for userspace to know if raytracing is supported
- Memory barrier cleanup and GBIF unhalt fix
- X185 support (aka gpu in X1 laptop chips)
- a505 support
- fixes

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvZQpYEHpSCgXGJ2kaHJDK6QFAFfTsfiWm4b2zZOnjXGw@mail.gmail.com

Merge tag 'drm-misc-next-2024-07-04' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next

drm-misc-next for $kernel-version:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:
  - dp/mst: Fix daisy-chaining at resume
  - dsc: Add helper to dump the DSC configuration
  - tests: Add tests for the new monochrome TV mode variant

Driver Changes:
  - ast: Refactor the mode setting code
  - panfrost: Fix devfreq job reporting
  - stm: Add LDVS support, DSI PHY updates
  - panels:
    - New panel: AUO G104STN01, K&d kd101ne3-40ti,

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240704-curvy-outstanding-lizard-bcea78@houat

Merge tag 'drm-intel-gt-next-2024-07-04' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next

Driver Changes:

Fixes/improvements/new stuff:

- Downgrade stolen lmem setup warning [gem] (Jonathan Cavitt)
- Evaluate GuC priority within locks [gt/uc] (Andi Shyti)
- Fix potential UAF by revoke of fence registers [gt] (Janusz Krzysztofik)
- Return NULL instead of '0' [gem] (Andi Shyti)
- Use the correct format specifier for resource_size_t [gem] (Andi Shyti)
- Suppress oom warning in favour of ENOMEM to userspace [gem] (Nirmoy Das)

Miscellaneous:

- Evaluate forcewake usage within locks [gt] (Andi Shyti)
- Fix typo in comment [gt/uc] (Andi Shyti)

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Tvrtko Ursulin <tursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZoZP6mUSergfzFMh@linux

Merge tag 'amd-drm-next-6.11-2024-07-03' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.11-2024-07-03:

amdgpu:
- Use vmalloc for dc_state
- Replay fixes
- Freesync fixes
- DCN 4.0.1 fixes
- DML fixes
- DCC updates
- Misc code cleanups and bug fixes
- 8K display fixes
- DCN 3.5 fixes
- Restructure DIO code
- DML1 fixes
- DML2 fixes
- GFX11 fix
- GFX12 updates
- GFX12 modifiers fixes
- RAS fixes
- IP dump fixes
- Add some updated IP version checks
_ Silence UBSAN warning

radeon:
- GPUVM fix

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703211314.2041893-1-alexander.deucher@amd.com

Merge tag 'amd-drm-next-6.11-2024-06-28' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.11-2024-06-28:

amdgpu:
- JPEG 5.x fixes
- More FW loading cleanups
- Misc code cleanups
- GC 12.x fixes
- ASPM fix
- DCN 4.0.1 updates
- SR-IOV fixes
- HDCP fix
- USB4 fixes
- Silence UBSAN warnings
- MES submission fixes
- Update documentation for new products
- DCC updates
- Initial ISP 4.x plumbing
- RAS fixes
- Misc small fixes

amdkfd:
- Fix missing unlock in error path for adding queues

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240628213135.427214-1-alexander.deucher@amd.com

Merge tag 'mediatek-drm-next-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next

Mediatek DRM Next for Linux 6.11

1. Convert to platform remove callback returning void
2. Drop chain_mode_fixup call in mode_valid()
3. Fixes the errors of MediaTek display driver found by IGT.
4. Add display support for the MT8365-EVK board
5. Fix bit depth overwritten for mtk_ovl_set bit_depth()
6. Remove less-than-zero comparison of an unsigned value
7. Call drm_atomic_helper_shutdown() at shutdown time
8. Log errors in probe with dev_err_probe()
9. Fix possible_crtcs calculation
10. Fix spurious kfree()

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240628134632.28672-1-chunkuang.hu@kernel.org

Merge tag 'drm-etnaviv-next-2024-06-28' of https://git.pengutronix.de/git/lst/linux into drm-next

- fix i.MX8MP NPU clock gating
- workaround FE register cdc issues on some cores
- fix DMA sync handling for cached buffers
- fix job timeout handling
- keep TS enabled on MMUv2 cores for improved performance

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/e8b91e2f18e6eaa722569dd21f559009064b1730.camel@pengutronix.de

Merge tag 'exynos-drm-next-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

Some cleanups to Exynos Virtual Display driver
- Use drm_edid_duplicate() instead of kmemdup().
- Replace existing EDID handling with struct drm_edid functions
  for improved management.
- Keep an allocated raw_edid or NULL and handle fake_edid_info in get_modes().

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703075912.37106-1-inki.dae@samsung.com

Merge v6.10-rc6 into drm-next

The exynos-next pull is based on a newer -rc than drm-next. hence
backmerge first to make sure the unrelated conflicts we accumulated
don't end up randomly in the exynos merge pull, but are separated out.

Conflicts are all benign: Adjacent changes in amdgpu and fbdev-dma
code, and cherry-pick conflict in xe.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Merge tag 'drm-xe-next-2024-07-02' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next

Driver Changes:
- Fix in migration code (Auld)
- Simplification in HWMon related code (Karthik)
- Fix in forcewake logic (Nirmoy)
- Fix engine utilization information (umesh)
- Clean up on MOCS related code (Roper)
- Fix on multicast register (Roper)
- Fix TLB invalidation timeout (Nirmoy)
- More SRIOV preparation (Michal)
- Fix out-of-bounds array access (Lucas)
- Fixes around some mutex utilization (Ashutosh, Vinay)
- Expand LNL workaround to BMG (Vinay)

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZoROvquFrTFhk3Pb@intel.com

drm/panthor: Record devfreq busy as soon as a job is started

If a queue is already assigned to the hardware, then a newly submitted
job can start straight away without waiting for the tick. However in
this case the devfreq infrastructure isn't notified that the GPU is
busy. By the time the tick happens the job might well have finished and
no time will be accounted for the GPU being busy.

Fix this by recording the GPU as busy directly in queue_run_job() in the
case where there is a CSG assigned and therefore we just ring the
doorbell.

Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block")
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703155646.80928-1-steven.price@arm.com

drm/mgag200: Rename constant MGAREG_Status to MGAREG_STATUS

Register constants are upper case. Fix MGAREG_Status accordingly.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205160142.3588-3-tzimmermann@suse.de

drm/display/dsc: Add a helper to dump the DSC configuration

Add a helper to dump the Display Stream Compression configuration, taken
into use in the i915 driver by a later patch.

v2:
- Rebase on the s/DRM_X16/FXP_Q4 change.
- s/DSC configration/DSC configuration in the function documentation.

Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240628164451.1177612-3-imre.deak@intel.com

drm: Add helpers for q4 fixed point values

Add helpers to convert between q4 fixed point and integer/fraction
values. Also add the format/argument macros required to printk q4 fixed
point variables. The q4 notation is based on the short variant described
by

https://en.wikipedia.org/wiki/Q_(number_format)

where only the number of fraction bits in the fixed point value are
defined, while the full size is deducted from the container type, that
is the size of int for these helpers. Using the fxp_ prefix, which makes
moving these helpers outside of drm to a more generic place easier, if
they prove to be useful.

These are needed by later patches dumping the Display Stream Compression
configuration in DRM core and in the i915 driver to replace the
corresponding bpp_x16 helpers defined locally in the driver.

v2: Use the more generic/descriptive fxp_q4 prefix instead of drm_x16.
   (Jani)

Cc: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240628164451.1177612-2-imre.deak@intel.com

drm/dp_mst: Skip CSN if topology probing is not done yet

[Why]
During resume, observe that we receive CSN event before we start topology
probing. Handling CSN at this moment based on uncertain topology is
unnecessary.

[How]
Add checking condition in drm_dp_mst_handle_up_req() to skip handling CSN
if the topology is yet to be probed.

Cc: Lyude Paul <lyude@redhat.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240626084825.878565-3-Wayne.Lin@amd.com

drm/dp_mst: Fix all mstb marked as not probed after suspend/resume

[Why]
After supend/resume, with topology unchanged, observe that
link_address_sent of all mstb are marked as false even the topology probing
is done without any error.

It is caused by wrongly also include "ret == 0" case as a probing failure
case.

[How]
Remove inappropriate checking conditions.

Cc: Lyude Paul <lyude@redhat.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: stable@vger.kernel.org
Fixes: 37dfdc55ffeb ("drm/dp_mst: Cleanup drm_dp_send_link_address() a bit")
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240626084825.878565-2-Wayne.Lin@amd.com

drm/panfrost: Mark simple_ondemand governor as softdep

Panfrost DRM driver uses devfreq to perform DVFS, while using simple_ondemand
devfreq governor by default.  This causes driver initialization to fail on
boot when simple_ondemand governor isn't built into the kernel statically,
as a result of the missing module dependency and, consequently, the required
governor module not being included in the initial ramdisk.  Thus, let's mark
simple_ondemand governor as a softdep for Panfrost, to have its kernel module
included in the initial ramdisk.

This is a rather longstanding issue that has forced distributions to build
devfreq governors statically into their kernels, [1][2] or has forced users
to introduce some unnecessary workarounds. [3]

For future reference, not having support for the simple_ondemand governor in
the initial ramdisk produces errors in the kernel log similar to these below,
which were taken from a Pine64 RockPro64:

  panfrost ff9a0000.gpu: [drm:panfrost_devfreq_init [panfrost]] *ERROR* Couldn't initialize GPU devfreq
  panfrost ff9a0000.gpu: Fatal error during GPU init
  panfrost: probe of ff9a0000.gpu failed with error -22

Having simple_ondemand marked as a softdep for Panfrost may not resolve this
issue for all Linux distributions.  In particular, it will remain unresolved
for the distributions whose utilities for the initial ramdisk generation do
not handle the available softdep information [4] properly yet.  However, some
Linux distributions already handle softdeps properly while generating their
initial ramdisks, [5] and this is a prerequisite step in the right direction
for the distributions that don't handle them properly yet.

[1] https://gitlab.manjaro.org/manjaro-arm/packages/core/linux/-/blob/linux61/config?ref_type=heads#L8180
[2] https://salsa.debian.org/kernel-team/linux/-/merge_requests/1066
[3] https://forum.pine64.org/showthread.php?tid=15458
[4] https://git.kernel.org/pub/scm/utils/kernel/kmod/kmod.git/commit/?id=49d8e0b59052999de577ab732b719cfbeb89504d
[5] https://github.com/archlinux/mkinitcpio/commit/97ac4d37aae084a050be512f6d8f4489054668ad

Cc: Diederik de Haas <didi.debian@cknow.org>
Cc: Furkan Kardame <f.kardame@manjaro.org>
Cc: stable@vger.kernel.org
Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4e1e00422a14db4e2a80870afb704405da16fd1b.1718655077.git.dsimic@manjaro.org

dt-bindings: display/msm: dsi-controller-main: Add SM7150

Add the DSI host found on SM7150.

Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/601231/
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/managed: Simplify if condition

The if condition !A || A && B can be simplified to !A || B.

Fixes the following Coccinelle/coccicheck warning reported by
excluded_middle.cocci:

WARNING !A || A && B is equivalent to !A || B

Compile-tested only.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240701195607.228852-1-thorsten.blum@toblux.com

drm/ast: Use drm_atomic_helper_commit_tail() helper

Ast has no special requirements for runtime power management. So
replace drm_atomic_helper_commit_tail_rpm() with the regular helper
drm_atomic_helper_commit_tail().

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627153638.8765-9-tzimmermann@suse.de

drm/ast: Inline ast_crtc_dpms() into callers

The function ast_crtc_dpms() is left over from when the ast driver
did not implement atomic modesetting. But DPMS is not supported by
atomic modesetting and the helper is only called to enable or
disable the CRTC sync pulses. Inline the function into its callers.

To disable the CRTC, ast sets (AST_DPMS_VSYNC_OFF | AST_DPMS_HSYNC_OFF)
in VGACRB6. Replace the constants with the correct register constants
for VGACRB6.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627153638.8765-8-tzimmermann@suse.de

drm/ast: Only set VGA SCREEN_DISABLE bit in CRTC code

The SCREEN_DISABLE bit controls scanout from display memory. The bit
affects all planes, so set it only in the CRTC's atomic enable and
disable functions.

A number of bugs affect this fix. First of all, ast_set_std_regs()
tries to set VGASR1 except for the SD bit. But the read bitmask is
invert, so it preserves anything except the SD bit. Fix this by
re-inverting the read mask.

The second issue is that primary-plane and CRTC helpers modify the
SD bit. The bit controls scanout for all planes, primary and HW
cursor, so set it only in the CRTC code.

Further add a constant to represent the SD bit in VGASR1. Keep the
plane's atomic_disable around to make the DRM framework happy.

v2:
- fix typos in commit message

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627153638.8765-7-tzimmermann@suse.de

drm/ast: Remove gamma LUT updates from DPMS code

The DPMS code, called from the CRTC's atomic_enable, rewrites the
gamma LUT. This is already done by the CRTC's atomic_flush. Remove
the duplication.

v2:
- fix a typo in commit message

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627153638.8765-6-tzimmermann@suse.de

drm/ast: Handle primary-plane format setup in atomic_update

Several color registers are programmed in the DPMS code of the CRTC's
atomic_enable helper and the primary plane's atomic_update. It requires
the color format and the display mode.

Both code paths handle different cases: the DPMS's code will not be
executed if the color format changes without a full mode switch. The
plane's code only runs if the color format changes, but ignores
display-mode changes.

The color format is a property of the primary plane, so consolidate all
color-format code in the plane's atomic_update. Remove it from the DPMS
helper.

v2:
- clarify commit message (Jocelyn)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627153638.8765-5-tzimmermann@suse.de

drm/ast: Move mode-setting code into mode_set_nofb CRTC helper

Do all mode setting in ast_crtc_helper_mode_set_nofb(), which
always runs after disabling the CRTC and before programming the
planes. Removes implicit synchronization between the CRTC's
atomic disable, enable and the vertical retrace.

Display-mode updates require HW cursors to be disabled. The HW
cursor only picks up changes at vertical retrace periods. So the
CRTC's atomic_disable helper waited for the retrace to delay any
following mode-setting operations, which then happened in
atomic_enable. See [1] for a description of the problem.

With the CRTC helper callback mode_set_nofb, we can now synchronize
and reprogram in the same place. As it always runs before the plane
update, the plane code can be reordered with the CRTC's later
atomic_enable et al.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/series/79914/
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627153638.8765-4-tzimmermann@suse.de

drm/ast: Program mode for AST DP in atomic_mode_set

The CRTC's atomic_flush function contains code to program the
display mode to the AST DP chip. Move the code to the encoder's
atomic_mode_set callback. The DRM atomic-modesetting code invoke
this callback as part of the atomic commit.

v2:
- fix typos in commit message

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627153638.8765-3-tzimmermann@suse.de

drm/ast: Implement atomic enable/disable for encoders

The CRTC helpers contain code to enable and disable DisplayPort
connectors. Implement this functionality in the respective connector's
atomic_enable/atomic_disable callbacks. DRM's atomic-modesetting
helpers will call the functions as part of the atomic commit.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627153638.8765-2-tzimmermann@suse.de

drm/exynos/vidi: convert to struct drm_edid

Prefer the struct drm_edid based functions for storing the EDID and
updating the connector.

It would be better if the vidi connection ioctl passed in the EDID size
separately instead of relying on the extension count specified in the
EDID, but that's what we have to rely on.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/vidi: simplify fake edid handling

Avoid assigning fake_edid_info to ctx->raw_edid. Always keep
ctx->raw_edid either an allocated pointer or NULL. Defer fake_edid_info
handling to .get_modes().

This should be functionally equivalent but slightly easier to follow.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/vidi: use drm_edid_duplicate()

Don't open code drm_edid_duplicate(). While at it, drop the error
message on allocation failure.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Merge tag 'exynos-drm-fixes-for-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into exynos-drm-next

Regression fix
- Fix an regression issue by adding 640x480 fallback mode
  for Exynos HDMI driver.

Bug fix
- Fix a memory leak by ensuring the duplicated EDID is properly freed in the get_modes function.

Code cleanup
- Remove redundant driver owner initialization since platform_driver_register() sets it automatically.

drm/amdgpu/atomfirmware: silence UBSAN warning

This is a variable sized array.

Link: https://lists.freedesktop.org/archives/amd-gfx/2024-June/110420.html
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix out of bounds access in gfx11 during ip dump

During ip dump in gfx11 the index variable is reused but is
not reinitialized to 0 and this causes the index calculation
to be wrong and access out of bound access.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add firmware for PSP IP v14.0.4

This patch is to add firmware for PSP 14.0.4.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable mode2 reset for SMU IP v14.0.4

Set the default reset method to mode2 for SMU 14.0.4.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add SMU IP v14.0.4 discovery support

This patch is to add SMU 14.0.4 support

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add SMU IP v14.0.4 support

This patch is to add SMU 14.0.4 support.

Signed-off-by: Li Ma <li.ma@amd.com>
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: smu v14.0.4 reuse smu v14.0.0 dpmtable

Replace IP VERSION with smu->is_apu in if condition.
And the dpmtable of smu v14.0.4 is same as smu v14.0.0.

Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add PSP IP v14.0.4 discovery support

This patch is to add PSP 14.0.4 support.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add PSP IP v14.0.4 support

This patch is to add PSP 14.0.4 support.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add firmware for VPE IP v6.1.3

This patch is to add firmware for VPE 6.1.3.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add VPE IP v6.1.3 discovery support

This patch is to add VPE 6.1.3 support.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add VPE IP v6.1.3 support

This patch is to add VPE 6.1.3 support.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add NBIO IP v7.11.3 support

Enable setting soc21 common clockgating for NBIO 7.11.3.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add NBIO IP v7.11.3 discovery support

This patch is to add NBIO 7.11.3 support.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add firmware for SDMA IP v6.1.2

This patch is to add firmware for SDMA 6.1.2.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: add KFD support for SDMA IP v6.1.2

Enable KFD setting SDMA info for SDMA 6.1.2.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add SDMA IP v6.1.2 discovery support

This patch is to add SDMA 6.1.2 support.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add firmware for GC IP v11.5.2

This patch is to add firmware for GC 11.5.2.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: add KFD support for GC IP v11.5.2

Enable KFD for GC 11.5.2.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>